Commission Regulation (EU) 2018/2026 of 19 December 2018 amending Annex IV to Regulation (EC) No 1221/2009 of the European Parliament and of the Council on the voluntary participation by organisations in a Community eco-management and audit scheme (EMAS) (Text with EEA relevance.)
"
(a) a summary of the organisation's activities, products and services, the organisation's relationship to any parent organisations as appropriate and a clear and unambiguous description of the scope of the EMAS registration including a list of the sites included in this registration; (b) the environmental policy and a brief description of the governance structure supporting the environmental management system of the organisation; (c) a description of all the significant direct and indirect environmental aspects which result in significant environmental impacts of the organisation, a brief description of the approach used to determine their significance and an explanation of the nature of the impacts as related to these aspects; (d) a description of the environmental objectives and targets in relation to the significant environmental aspects and impacts; (e) a description of the actions implemented and planned to improve environmental performance, achieve the objectives and targets and ensure compliance with legal requirements related to the environment. Where available, reference should be made to the relevant best environmental management practices presented in the sectoral reference documents as referred to in Article 46; (f) a summary of the data available on the environmental performance of the organisation with respect to its significant environmental aspects. Reporting shall be on both the core environmental performance indicators and the specific environmental performance indicators as set out in Section C. Where environmental objectives and targets exist, the respective data shall be reported; (g) a reference to the main legal provisions to be taken into account by the organisation to ensure compliance with legal requirements related to the environment and a statement regarding legal compliance; (h) a confirmation regarding the requirements of Art. 25 para. 8 and the name and accreditation or licence number of the environmental verifier and the date of validation. The declaration as referred to in Annex VII signed by the environmental verifier may be used instead. The updated environmental statement shall contain at least the elements and shall meet the minimum requirements as set out in points (e) to (h). Organisations may decide to integrate in their environmental statement additional factual information related to the activities, products and services of the organisation or to their compliance with specific requirements. All information contained in the environmental statement shall be validated by the environmental verifier. The environmental statement may be integrated in other reporting documents of the organisation (e.g. management, sustainability or corporate social responsibility reports). When integrated in such reporting documents a clear distinction shall be made between validated and non-validated information. The environmental statement shall be clearly identified (for example by using the EMAS logo) and the document shall include a short explanation of the validation process in the context of EMAS.
(a) give an accurate appraisal of the organisation's environmental performance; (b) be readily understood and unambiguous; (c) allow for a year on year comparison in order to assess whether the organisation's environmental performance has improved; to enable this comparison, the reporting shall cover at least 3 years of activity, provided the data are available.; (d) allow for comparison with sector, national or regional benchmarks as appropriate; (e) allow for comparison with regulatory requirements as appropriate.
(a) Core indicators focus on performance in the following key environmental areas: (i) Energy; (ii) Material; (iii) Water; (iv) Waste; (v) Land use with regard to biodiversity; and (vi) Emissions.
Reporting on core environmental performance indicators is an obligation. However, an organisation may evaluate the relevance of those indicators within the context of its significant environmental aspects and impacts. Where an organisation concludes that one or more core indicators are not relevant to its significant environmental aspects and impacts, it may not report on those core indicators. In that case, the organisation shall include in the environmental statement a clear and reasoned explanation for not doing so. (b) Each core indicator is composed of: (i) a figure A indicating the total annual input/output in the given area; (ii) a figure B indicating an annual reference value representing the activity of the organisation; and (iii) a figure R indicating the ratio A/B;
Each organisation shall report on all 3 elements for each indicator. (c) The indication of the total annual input/output in the given area, figure A, shall be reported as follows: (i) on Energy the "total direct energy consumption", corresponding to the total annual amount of energy consumed by the organisation, the "total renewable energy consumption", corresponding to the total annual amount of energy consumed by the organisation that was generated from renewable energy sources, the "total renewable energy generation", corresponding to the total annual amount of energy generated by the organisation from renewable energy sources.
This last element shall be reported only if the total energy generated by the organisation from renewable energy sources significantly exceeds the total renewable energy consumed by the organisation, or if the renewable energy generated by the organisation was not consumed by the organisation. If different types of energy are consumed or, in case of renewable energy, generated (such as electricity, heat, fuels or others) their annual consumption or production shall be reported separately as appropriate. Energy should preferably be expressed in kWh, MWh, GJ or other metrics commonly used to report the type of energy consumed or generated. (ii) on Material the "annual mass-flow of key materials used" (excluding energy carriers and water), preferably expressed in units of weight (e.g. kilograms or tonnes) or volume (e.g. m 3 ) or other metrics commonly used in the sector.
When different types of materials are used, their annual mas-flow should be reported separately as appropriate. (iii) on Water the "total annual water use", expressed in units of volume (e.g. litres or m 3 ),
(iv) on Waste the "total annual generation of waste", broken down by type, preferably expressed in units of weight (e.g. kilograms or tonnes) or volume (e.g. m 3 ), or in other metrics commonly used in the sector,the "total annual generation of hazardous waste" preferably expressed in units of weight (e.g. kilograms or tonnes) or m 3 or in other metric commonly used in the sector,
(v) on Land-use with regard to biodiversity the forms of land use with regard to biodiversity expressed in units of area (e.g. m 2 or ha):total use of land total sealed area total nature-oriented area on site total nature-oriented area off site
A "nature-oriented area" is an area dedicated primarily to nature preservation or restoration. Nature-oriented areas can be located on-site and include roof, façade, water drainages or others elements that have been designed, adapted or are managed in order to promote biodiversity. Nature-oriented areas can also be located outside the organisation site provided that the area is owned or managed by the organisation and is primarily dedicated to promoting biodiversity. Co-managed areas dedicated to promoting biodiversity can also be described, provided that the scope of co-management is clearly outlined. A "sealed area" means any area where the original soil has been covered (such as roads) making it impermeable. This non-permeability can create environmental impacts. (vi) on Emissions the "total annual emission of greenhouse gases", including at least emissions of CO 2 , CH4 , N2 O, HFCs, PFCs, NF3 and SF6 , expressed in tonnes of CO2 equivalent,
The organisation should consider reporting its greenhouse gas emissions according to an established methodology, such as the Greenhouse Gas Protocol. the "total annual air emission", including at least emissions of SO 2 , NOx and PM, expressed in kilograms or tonnes,
(d) The indication of the annual reference value representing the activity of the organisation, figure B, shall be selected and reported based on the following requirements: Figure B shall: (i) be comprehensible; (ii) be a figure that best represents the organisation's overall annual activity; (iii) allow a correct description of the environmental performance of the organisation, taking into account organisation specificities and activities; (iv) be a common reference value for the sector the organisation is working in, such as the following examples: total annual physical output total number of employees total overnights total number of inhabitants in an area (in the case of public administration) tonnes of waste processed (for organisations active in the waste management sector) total energy produced (for organisations active in the energy production sector)
(v) ensure the comparability of the reported indicators over time. Once defined, Figure B shall be used in upcoming environmental statements. A change of Figure B shall be explained in the environmental statement. In case of a change of Figure B, the organisation shall ensure the figure can be compared over at least 3 years by recalculating the indicators for the previous years according to the newly defined Figure B.