CHAPTER IIExport and import restrictions

Article 31.It shall be prohibited:(a)to sell, supply, transfer or export, directly or indirectly, the goods and technology, including software, listed in Annex II, whether or not originating in the Union, to any natural or legal person, entity or body in, or for use in the DPRK;(b)to sell, supply, transfer or export aviation fuel, directly or indirectly, as listed in Annex III to the DPRK or transport to DPRK aviation fuel on board the flag vessels or aircraft of Member States, whether or not originating in the territories of Member States;(c)to import, purchase or transfer, directly or indirectly, the goods and technology listed in Annex II from the DPRK, whether or not originating in the DPRK;(d)to import, purchase or transfer, directly or indirectly, gold, titanium ore, vanadium ore and rare-earth minerals, as listed in Annex IV, from the DPRK, whether or not originating in the DPRK;(e)to import, purchase or transfer, directly or indirectly, coal, iron and iron ore, as listed in Annex V, from the DPRK, whether or not originating in the DPRK;(f)to import, purchase or transfer, directly or indirectly, from DPRK petroleum products, as listed in Annex VI, whether or not originating in the DPRK; and(g)to import, purchase or transfer, directly or indirectly, copper, nickel, silver and zinc, as listed in Annex VII, from the DPRK, whether or not originating in the DPRK;2.Part I of Annex II shall include all items, materials, equipment, goods and technology, including software, which are dual-use items or technology as defined in Annex I to Council Regulation (EC) No 428/2009Council Regulation (EC) No 428/2009 of 5 May 2009 setting up a Community regime for the control of exports, transfer, brokering and transit of dual-use items (OJ L 134, 29.5.2009, p. 1)..Part II of Annex II shall include other items, materials, equipment, goods and technology which could contribute to the DPRK's nuclear-related, ballistic-missile-related or other weapons of mass destruction-related programmes.Part III of Annex II shall include certain key components for the ballistic-missile sector.Part IV of Annex II shall include weapons of mass destruction-related items, materials, equipment, goods and technology designated, pursuant to paragraph 25 of UNSCR 2270 (2016).Part V of Annex II shall include weapons of mass destruction-related items, materials, equipment, goods and technology designated, pursuant to paragraph 4 of UNSCR 2321 (2016).Part VI of Annex II shall include weapons of mass destruction-related items, materials, equipment, goods and technology designated pursuant to paragraph 4 of UNSCR 2371 (2017).Part VII of Annex II shall include conventional arms-related items, materials, equipment, goods and technology designated, pursuant to paragraph 5 of UNSCR 2371 (2017).Part VIII of Annex II shall include weapons of mass destruction-related items, materials, equipment, goods and technology designated, pursuant to paragraph 4 of UNSCR 2375 (2017).Part IX of Annex II shall include conventional arms-related items, materials, equipment, goods and technology designated, pursuant to paragraph 5 of UNSCR 2375 (2017).Annex III shall include the aviation fuel referred to in point (b) of paragraph 1.Annex IV shall include the gold, titanium ore, vanadium ore and rare-earth minerals, referred to in point (d) of paragraph 1.Annex V shall include the coal, iron and iron ore, referred to in point (e) of paragraph 1.Annex VI shall include the petroleum products referred to in point (f) of paragraph 1.Annex VII shall include the copper, nickel, silver and zinc, referred to in point (g) of paragraph 1.3.The prohibition referred to in point (b) of paragraph 1 shall not apply with respect to the sale or supply of aviation fuel to civilian passenger aircraft outside the DPRK exclusively for consumption during their flight to the DPRK and their return to the airport of origin.

Article 41.By way of derogation from point (b) of Article 3(1), the competent authorities of the Member States may authorise the sale, supply or transfer of aviation fuel, provided that the Member State has obtained the advance approval of the Sanctions Committee on an exceptional case-by-case basis for the transfer to the DPRK of such products for verified essential humanitarian needs and subject to specified arrangements for effective monitoring of delivery and use.2.By way of derogation from point (e) of Article 3(1), the competent authorities of the Member States may authorise the import, purchase or transfer of coal provided that the competent authorities of the Member States have determined on the basis of credible information that the shipment originated outside of the DPRK and was transported through the DPRK solely for export from the Port of Rajin (Rason), that the exporting state has notified the Sanctions Committee in advance of such transactions, and that the transactions are unrelated to generating revenue for the DPRK's nuclear or ballistic missile programmes and other activities prohibited by UNSCRs 1718 (2006), 1874 (2009), 2087 (2013), 2094 (2013), 2270 (2016), 2321 (2016), 2356 (2017) or 2371 (2017), or by this Regulation.3.The Member State concerned shall notify the other Member States and the Commission of any authorisation granted pursuant to paragraphs 1 and 2.

Article 51.It shall be prohibited to sell, supply, transfer or export, directly or indirectly, to the DPRK any item, except food or medicine, if the exporter knows or has reasonable grounds to believe that:(a)the item is destined directly or indirectly for the DPRK's armed forces; or(b)the export of the item could support or enhance the operational capabilities of the armed forces of a State other than the DPRK.2.It shall be prohibited to import, purchase or transport from DPRK items referred to in paragraph 1 if the importer or transporter knows or has reasonable grounds to believe that one of the grounds in point (a) or (b) of paragraph 1 is met.

Article 61.By way of derogation from Article 5, the competent authorities of the Member States may authorise the sale, supply, transfer or export of an item to the DPRK, or the import, purchase or transport of an item from the DPRK, where:(a)the item does not relate to the production, development, maintenance or use of military goods, or development or the maintenance of military personnel, and the competent authority has determined that the item would not directly contribute to the development of the operational capabilities of the DPRK's armed forces or to exports that support or enhance the operational capabilities of armed forces of a third country other than the DPRK;(b)the Sanctions Committee has determined that a particular supply, sale or transfer would not be contrary to the objectives of UNSCR 1718 (2006), 1874 (2009), 2087 (2013), 2094 (2013), 2270 (2016) or 2321 (2016); or(c)the competent authority of the Member State is satisfied that the activity is exclusively for either humanitarian or livelihood purposes which will not be used by DPRK persons, entities or bodies to generate revenue, and is not related to any activity prohibited by UNSCR 1718 (2006), 1874 (2009), 2087 (2013), 2094 (2013), 2270 (2016) or 2321 (2016), provided that the Member State notifies the Sanctions Committee in advance of such a determination and informs the Sanctions Committee of measures taken to prevent the diversion of the item for any prohibited purpose.2.The Member State concerned shall notify the other Member States and the Commission of its intention to grant an authorisation under this Article at least one week prior to granting the authorisation.

Article 71.It shall be prohibited:(a)to provide, directly or indirectly, technical assistance and brokering services related to goods and technology listed in the EU Common List of Military Equipment or in Annex II, and related to the provision, manufacture, maintenance and use of goods listed in the EU Common List of Military Equipment or in Annex II, to any natural or legal person, entity or body in, or for use in the DPRK;(b)to provide, directly or indirectly, financing or financial assistance related to goods and technology listed in the EU Common List of Military Equipment or in Annex II, including in particular grants, loans and export credit insurance, as well as insurance and reinsurance, for any sale, supply, transfer or export of such items, or for any provision of related technical assistance to any natural or legal person, entity or body in, or for use in the DPRK;(c)to obtain, directly or indirectly, technical assistance related to goods and technology listed in the EU Common List of Military Equipment or in Annex II, and to the provision, manufacture, maintenance and use of goods listed in the EU Common List of Military Equipment or in Annex II from any natural or legal person, entity or body in, or for use in the DPRK;(d)to obtain, directly or indirectly, financing or financial assistance related to goods and technology listed in the EU Common List of Military Equipment or in Annex II, including in particular grants, loans and export credit insurance, for any sale, supply, transfer or export of such items, or for any provision of related technical assistance from any natural or legal person, entity or body in, or for use in, the DPRK.2.The prohibitions set out in paragraph 1 shall not apply to non-combat vehicles which have been manufactured or fitted with materials to provide ballistic protection, intended solely for protective use of personnel of the Union and its Member States in the DPRK.

Article 81.By way of derogation from Article 3(1) and Article 7(1), the competent authorities of the Member States may authorise, under the terms and conditions they deem appropriate, the direct or indirect supply, sale, transfer or export of the items and technology, including software, referred to in point (a) and (b) of Article 3(1) or the assistance or brokering services referred to in Article 7(1), provided that the goods and technology, assistance or brokering services are for food, agricultural, medical or other humanitarian purposes.2.By way of derogation from point (a) of Article 3(1) and points (a) and (b) of Article 7(1), the competent authorities of the Member States may authorise the transactions referred to therein under the conditions they deem appropriate and provided that the UNSC has approved the request.3.The Member State concerned shall notify the other Member States and the Commission of any request for approval which it has submitted to the UNSC pursuant to paragraph 3.4.The Member State concerned shall notify the other Member States and the Commission within four weeks of authorisations granted pursuant to this Article.

Article 91.In addition to the obligation to provide the competent customs authorities with the pre-arrival and pre-departure information as determined in the relevant provisions concerning entry and exit summary declarations as well as customs declarations in Regulation (EU) No 952/2013 of the European Parliament and of the CouncilRegulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1)., in Commission Delegated Regulation (EU) 2015/2446Commission Delegated Regulation (EU) 2015/2446 of 28 July 2015 supplementing Regulation (EU) No 952/2013 of the European Parliament and of the Council as regards detailed rules concerning certain provisions of the Union Customs Code (OJ L 343, 29.12.2015, p. 1). and in Commission Implementing Regulation (EU) 2015/2447Commission Implementing Regulation (EU) 2015/2447 of 24 November 2015 laying down detailed rules for implementing certain provisions of Regulation (EU) No 952/2013 of the European Parliament and of the Council laying down the Union Customs Code (OJ L 343, 29.12.2015, p. 558)., the person who provides the information referred to in paragraph 2 shall declare whether the goods are covered by the EU Common List of Military Equipment or by this Regulation and, where their export is subject to authorisation, specify the goods and technology covered by the export licence granted.2.The required additional information shall be submitted using an electronic customs declaration or, in the absence of such a declaration, in any other electronic or written form, as appropriate.

Article 101.It shall be prohibited:(a)to sell, supply, transfer or export, directly or indirectly, luxury goods as listed in Annex VIII, to the DPRK;(b)to import, purchase or transfer from the DPRK, directly or indirectly, luxury goods, as listed in Annex VIII, whether or not originating in the DPRK.2.The prohibition referred to in point (b) of paragraph 1 shall not apply to travellers' personal effects or to goods of a non-commercial nature for travellers' personal use contained in their luggage.3.The prohibitions referred to in paragraph 1 shall not apply to goods which are necessary for the official purposes of diplomatic or consular missions of Member States in the DPRK or of international organisations enjoying immunities in accordance with international law, or to the personal effects of their staff.4.The competent authorities of the Member States may authorise, under the conditions they deem appropriate, a transaction with regard to goods referred to in point (17) of Annex VIII, provided that the goods are for humanitarian purposes.

Article 11It shall be prohibited:(a)to sell, supply, transfer or export, directly or indirectly, gold, precious metals and diamonds as listed in Annex IX, whether or not originating in the Union, to or for the Government of the DPRK, its public bodies, corporations and agencies, the Central Bank of the DPRK and any person, entity or body acting on their behalf or at their direction, or any entity or body owned or controlled by them;(b)to import, purchase or transport, directly or indirectly, gold, precious metals and diamonds, as listed in Annex IX, whether or not originating in the DPRK, from the Government of the DPRK, its public bodies, corporations and agencies, the Central Bank of the DPRK and any person, entity or body acting on their behalf or at their direction, or any entity or body owned or controlled by them;(c)to provide, directly or indirectly, technical assistance or brokering services, financing or financial assistance, related to the goods referred to in points (a) and (b), to the Government of the DPRK, its public bodies, corporations and agencies, the Central Bank of the DPRK and any person, entity or body acting on their behalf or at their direction, or any entity or body owned or controlled by them.

Article 12It shall be prohibited to sell, supply, transfer or export, directly or indirectly, newly printed or unissued DPRK denominated banknotes and minted coinage, to or for the benefit of the Central Bank of DPRK.

Article 13It shall be prohibited to import, purchase or transfer, directly or indirectly, statues as listed in Annex X, from DPRK whether or not originating in the DPRK.

Article 14By way of derogation from the prohibition in Article 13, the competent authorities of the Member States may authorise the import, purchase or transfer, provided that the Member State concerned has obtained the advance approval of the Sanctions Committee on a case-by-case basis.

Article 15It shall be prohibited to sell, supply, transfer or export, directly or indirectly, helicopters and vessels, as listed in Annex XI, to the DPRK.

Article 16By way of derogation from the prohibition in Article 15, the competent authorities of the Member States may authorise such a sale, supply, transfer or export, provided that the Member State has obtained the advance approval of the Sanctions Committee on a case-by-case basis.

Article 16a1.It shall be prohibited to import, purchase or transfer, directly or indirectly, seafood, including fish, crustaceans, molluscs, and other aquatic invertebrates in all forms, as listed in Annex XIa, from the DPRK, whether or not originating in the DPRK.2.It shall be prohibited to purchase or transfer, directly or indirectly, fishing rights from the DPRK.

Article 16bIt shall be prohibited to import, purchase or transfer, directly or indirectly, lead and lead ore, as listed in Annex XIb, from the DPRK, whether or not originating in the DPRK.

Article 16cIt shall be prohibited to sell, supply, transfer or export, directly or indirectly, condensates and natural gas liquids, as listed in Annex XIc, to the DPRK.

Article 16dIt shall be prohibited to sell, supply, transfer or export, directly or indirectly, all refined petroleum products, as listed in Annex XId, whether or not originating in the Union, to the DPRK.

Article 16e1.By way of derogation from Article 16d, the competent authorities of the Member States may authorise transactions in refined petroleum products that are determined to be exclusively for humanitarian purposes, provided that all of the following conditions are met:(a)the transactions do not involve individuals or entities that are associated with the DPRK's nuclear or ballistic missile programmes or other activities prohibited by UNSCR 1718 (2006), 1874 (2009), 2087 (2013), 2094 (2013), 2270 (2016), 2321 (2016), 2356 (2017), 2371 (2017), 2375 (2017) or 2397 (2017), including the persons, entities and bodies listed in Annexes XIII, XV, XVI and XVII;(b)the transaction is unrelated to generating revenue for the DPRK's nuclear or ballistic missile programmes or other activities prohibited by UNSCR 1718 (2006), 1874 (2009), 2087 (2013), 2094 (2013), 2270 (2016), 2321 (2016), 2356 (2017), 2371 (2017), 2375 (2017) or 2397 (2017);(c)the Sanctions Committee has not notified the Member States that 90 % of the aggregate annual limit has been reached; and(d)the Member State concerned notifies the Sanctions Committee of the amount of the export and information on all parties to the transaction every 30 days.2.The Member State concerned shall notify the other Member States and the Commission of any authorisation granted pursuant to paragraph 1.

Article 16fIt shall be prohibited to sell, supply, transfer or export, directly or indirectly, crude oil, as listed in Annex XIe, whether or not originating in the Union, to the DPRK.

Article 16g1.By way of derogation from Article 16f, the competent authorities of the Member States may authorise transactions in crude oil, provided that all of the following conditions are met:(a)the competent authority of the Member State has determined that the transaction is exclusively for humanitarian purposes; and(b)the Member State has obtained the advance approval of the Sanctions Committee on a case-by-case basis, in accordance with paragraph 4 of UNSCR 2397 (2017).2.The Member State concerned shall notify the other Member States and the Commission of any authorisation granted pursuant to paragraph 1.

Article 16hIt shall be prohibited to import, purchase or transfer, directly or indirectly, textiles, as listed in Annex XIf, from the DPRK, whether or not originating in the DPRK.

Article 16i1.By way of derogation from Article 16h, the competent authorities of the Member States may authorise the import, purchase or transfer of textiles, provided that the Member State has obtained the advance approval of the Sanctions Committee on a case-by-case basis.2.By way of derogation from Article 16h, the competent authorities of the Member States may authorise the import, purchase or transfer of textiles by no later than 10 December 2017 provided that:(a)the import, purchase or transfer is due under a written contract that entered into force prior to 11 September 2017; and(b)the Member State concerned notifies the Sanctions Committee of the details of such import, purchase or transfer by no later than 24 January 2018.3.The Member State concerned shall notify the other Member States and the Commission of any authorisation granted pursuant to paragraphs 1 and 2.

Article 16jIt shall be prohibited to import, purchase or transfer, directly or indirectly, food and agricultural products listed in Annex XIg from the DPRK, whether or not originating in the DPRK.

Article 16kIt shall be prohibited to import, purchase or transfer, directly or indirectly, machinery and electrical equipment listed in Annex XIh from the DPRK, whether or not originating in the DPRK.

Article 16lIt shall be prohibited to import, purchase or transfer, directly or indirectly, earth and stone, including magnesite and magnesia, listed in Annex XIi from the DPRK, whether or not originating in the DPRK.

Article 16mIt shall be prohibited to import, purchase or transfer, directly or indirectly, wood listed in Annex XIj from the DPRK, whether or not originating in the DPRK.

Article 16nIt shall be prohibited to import, purchase or transfer, directly or indirectly, vessels listed in Annex XIk from the DPRK, whether or not originating in the DPRK.

Article 16o1.By way of derogation from Articles 16j to 16n, the competent authorities of the Member States may authorise the import, purchase or transfer of the items referred to in those Articles by no later than 21 January 2018 provided that:(a)the import, purchase or transfer is due under a written contract that entered into force prior to 22 December 2017; and(b)the Member State concerned notifies the Sanctions Committee of the details of such import, purchase or transfer by no later than 5 February 2018.2.The Member State concerned shall notify the other Member States and the Commission of any authorisation granted pursuant to paragraph 1.

Article 16pIt shall be prohibited to sell, supply, transfer or export to the DPRK, directly or indirectly, all industrial machinery, transportation vehicles, and iron, steel and other metals listed in part A of Annex XIl, whether or not originating in the Union.

Article 16q1.The competent authorities of the Member States may authorise the export of spare parts needed to maintain the safe operation of DPRK commercial civilian passenger aircraft of the aircraft models and types listed in part B of Annex XIl.2.The Member State concerned shall notify the other Member States and the Commission of any authorisation granted pursuant to paragraph 1.

CHAPTER IIIRestrictions on Certain Commercial Activities

Article 171.It shall be prohibited, in the territory of the Union, to accept or approve investment in any commercial activity, where such investment is made by:(a)natural or legal persons, entities or bodies of the Government of the DPRK;(b)the Workers' Party of Korea;(c)nationals of the DPRK;(d)legal persons, entities or bodies incorporated or constituted under the law of the DPRK;(e)natural or legal persons, entities or bodies acting on behalf or at the direction of persons, entities or bodies referred to in (a) to (d); and(f)natural or legal persons, entities or bodies owned or controlled by the natural or legal persons, entities or bodies referred to in (a) to (d).2.It shall be prohibited:(a)to establish, maintain or operate a joint venture or a cooperative entity with any natural or legal person, entity or body referred to in paragraph 1 or domiciled in the DPRK or to, to take, maintain or extend an ownership interest, including by acquisition in full or the acquisition of shares and other securities of a participatory nature in any legal person, entity or body that is referred to in paragraph 1 or is domiciled in the DPRK, or in activities or assets in the DPRK;(b)to grant financing or financial assistance to any natural or legal person, entity or body referred to in points (d) to (f) of paragraph 1 or for the documented purpose of financing such natural or legal persons, entities or bodies;(c)to provide investment services directly or indirectly related to the activities referred to in points (a) and (b) of this paragraph; and(d)to participate directly or indirectly in joint ventures or in any other business arrangements with entities listed in Annex XIII, as well as with natural or legal persons, entities or bodies acting for or on their behalf or direction.3.Existing joint ventures or cooperative entities referred to in point (a) of paragraph 2, shall be closed by 9 January 2018, or within 120 days after the Sanctions Committee has denied a request for approval.

Article 17a1.By way of derogation from point (a) of Article 17(2), the competent authorities of the Member States may authorise such activities, in particular those regarding joint ventures or cooperative entities that are non-commercial, public utility infrastructure projects not generating profit, provided that the Member State has obtained the advance approval of the Sanctions Committee on a case-by-case basis.2.By way of derogation from point (a) of Article 17(2), and in insofar as they do not relate to joint ventures or cooperative entities, the competent authorities of the Member States may authorise such activities, provided that the Member State has determined that those activities are exclusively for humanitarian purposes, and are not in the sectors of mining, refining, chemical, metallurgy or the metalworking, aerospace or conventional arms-related industries.The Member State concerned shall notify the other Member States and the Commission of any authorisation granted pursuant to paragraphs 1 or 2.

Article 17bBy way of derogation from Article 17(3), the competent authorities of the Member States may authorise such joint venture or cooperative entity to remain operational, provided that the Member State has obtained the advance approval of the Sanctions Committee on a case-by-case basis.

Article 181.It shall be prohibited:(a)to provide, directly or indirectly, any services incidental to mining or any services incidental to manufacturing in the chemical, mining and refining industry, that are referred to in part A of Annex XII, to any natural or legal person, entity or body in, or for use in, the DPRK; and(b)to provide, directly or indirectly, computer and related services as referred to in part B of Annex XII, to any natural or legal person, entity or body in, or for use in, the DPRK.2.The prohibition in point (b) of paragraph 1 shall not apply with respect to computer and related services, insofar as such services are intended to be used exclusively for the official purposes of a diplomatic or consular mission or an international organisation enjoying immunities in the DPRK in accordance with international law.3.The prohibition in point (b) of paragraph 1 shall not apply with respect to the provision of computer and related services by public bodies or by legal persons, entities or bodies that receive public funding from the Union or Member States to provide these services for development purposes that directly address the needs of the civilian population or the promotion of denuclearisation.

Article 191.By way of derogation from point (a) of Article 18(1), the competent authorities of the Member States may authorise the provision of services incidental to mining and the provision of services incidental to manufacturing in the chemical, mining and refining industries, insofar as such services are intended to be used exclusively for development purposes that directly address the needs of the civilian population or the promotion of denuclearisation.2.In cases not covered by Article 18(3), and by way of derogation from point (b) of Article 18(1), the competent authorities of the Member States may authorise the provision of computer and related services, insofar as those services are intended to be used exclusively for development purposes that directly address the needs of the civilian population or the promotion of denuclearisation.

Article 201.It shall be prohibited:(a)to lease or otherwise make available real property, directly or indirectly, to persons, entities or bodies of the Government of the DPRK, for any purpose other than diplomatic or consular activities, pursuant to the 1961 Vienna Convention on Diplomatic Relations and the 1963 Vienna Convention on Consular Relations;(b)to lease real property, directly or indirectly, from persons, entities or bodies of the Government of the DPRK; and(c)to engage in any activity linked to the use of real property that persons, entities or bodies of the Government of the DPRK own, lease or are otherwise entitled to use, except for the provision of goods and services which:(i)are essential for the functioning of diplomatic missions or consular posts, pursuant to the 1961 and 1963 Vienna Conventions; and(ii)cannot be used to generate income or profit, directly or indirectly, for the Government of the DPRK.2.For the purposes of this Article "real property" means land, buildings and parts thereof which are located outside the territory of the DPRK.

CHAPTER IVRestrictions on Transfers of Funds and Financial Services

Article 211.It shall be prohibited to transfer funds, including clearing of funds, to and from the DPRK.2.It shall be prohibited for credit and financial institutions to enter into, or continue to participate in, any transactions with:(a)credit and financial institutions domiciled in the DPRK;(b)branches or subsidiaries falling within the scope of Article 1 of credit and financial institutions domiciled in the DPRK;(c)branches or subsidiaries falling outside the scope of Article 1 of credit and financial institutions domiciled in the DPRK;(d)credit and financial institutions that are not domiciled in the DPRK, that fall within the scope of Article 1 and that are controlled by persons, entities or bodies domiciled in the DPRK;(e)credit and financial institutions that are not domiciled in DPRK or do not fall within the scope of Article 1, but are controlled by persons, entities or bodies domiciled in the DPRK.3.The prohibitions in paragraphs 1 and 2 shall not apply to any transfer of funds or transaction which is necessary for the official purposes of a diplomatic or consular mission of a Member State in the DPRK or an international organisation enjoying immunities in DPRK in accordance with international law.4.The prohibitions in paragraphs 1 and 2 shall not apply to any of the following transactions, provided that they involve a transfer of funds for amounts equal to or below EUR 15000 or equivalent:(a)transactions regarding foodstuffs, healthcare or medical equipment or for agricultural or humanitarian purposes;(b)transactions regarding the execution of the exemptions provided for in this Regulation;(c)transactions in connection with a specific trade contract not prohibited by this Regulation;(d)transactions required exclusively for the implementation of projects funded by the Union or its Member States for development purposes directly addressing the needs of the civilian population or the promotion of denuclearisation; and(e)transactions regarding a diplomatic or consular mission or an international organisation enjoying immunities in accordance with international law, insofar as such transactions are intended to be used for official purposes of the diplomatic or consular mission or international organisation.5.The prohibitions in paragraphs 1 and 2 shall not apply to transactions regarding personal remittances, provided that they involve a transfer of funds for amounts equal to or below EUR 5000 or equivalent.

Article 221.By way of derogation from the prohibitions in Article 21(1) and (2), the competent authorities of the Member States may authorise:(a)the transactions mentioned in points (a) to (e) of Article 21(4) with a value above EUR 15000 or equivalent; and(b)the transactions mentioned in Article 21(5) with a value above EUR 5000 or equivalent.2.The requirement for authorisation referred to in paragraph 1 shall apply regardless of whether the transfer of funds is executed in a single operation or in several operations which appear to be linked. For the purpose of this Regulation, "operations which appear to be linked" includes:(a)a series of consecutive transfers from or to the same credit or financial institution within the scope of Article 21(2) to or from the same DPRK person, entity or body, which are made in connection with a single obligation to transfer funds, where each individual transfer falls below EUR 15000 for transactions mentioned in Article 21(4) or EUR 5000 for transactions mentioned in Article 21(5), but which, in the aggregate, meet the criteria for authorisation; and(b)a chain of transfers involving different payment service providers, or natural or legal persons, which is related to a single obligation to make a transfer of funds.3.The Member States shall notify each other and the Commission of any authorisation granted pursuant to paragraph 1.4.By way of derogation from the prohibitions in Article 21(1) and (2), the competent authorities of the Member States may authorise transactions regarding payments to satisfy claims against the DPRK, its nationals or legal persons, entities or bodies incorporated or constituted under the law of the DPRK, and transactions of a similar nature that do not contribute to activities prohibited by this Regulation, on a case-by-case basis and if the Member State concerned has notified the other Members States and the Commission at least 10 days in advance of granting an authorisation.

Article 231.Credit and financial institutions shall, in their activities, including the clearing of funds, with credit and financial institutions referred to in Article 21(2):(a)apply customer due diligence measures established pursuant to Articles 13 and 14 of Directive (EU) 2015/849 of the European Parliament and of the CouncilDirective (EU) 2015/849 of the European Parliament and of the Council of 20 May 2015 on the prevention of the use of the financial system for the purposes of money laundering or terrorist financing, amending Regulation (EU) No 648/2012 of the European Parliament and of the Council, and repealing Directive 2005/60/EC of the European Parliament and of the Council and Commission Directive 2006/70/EC (OJ L 141, 5.6.2015, p. 73).;(b)ensure compliance with anti-money-laundering and counter-terrorist-financing procedures established pursuant to Directive (EU) 2015/849 and Regulation (EU) 2015/847 of the European Parliament and of the CouncilRegulation (EU) 2015/847 of the European Parliament and of the Council of 20 May 2015 on information accompanying transfers of funds and repealing Regulation (EC) No 1781/2006 (OJ L 141, 5.6.2015, p. 1).;(c)require that information on payers as well as information on payees accompanying transfers of funds is provided as required by Regulation (EU) 2015/847 and refuse to process the transaction if any of this information is missing or incomplete;(d)maintain records of the transactions in accordance with point (b) of Article 40 of Directive (EU) 2015/849;(e)where there are reasonable grounds to suspect that funds could contribute to the DPRK's nuclear-related, ballistic-missile-related or other weapons of mass destruction-related programmes or activities ("proliferation financing"), promptly notify the competent Financial Intelligence Unit (FIU) as defined by Directive (EU) 2015/849, or any other competent authority designated by the Member State concerned, without prejudice to Article 7(1) or Article 33 of this Regulation;(f)promptly report any suspicious transactions, including attempted transactions;(g)refrain from carrying out transactions which they reasonably suspect could be related to proliferation financing until they have completed the necessary action in accordance with point (e) and have complied with any instructions from the relevant FIU or competent authority.2.For the purposes of paragraph 1, the FIU, or any other competent authority serving as a national centre for receiving and analysing suspicious transactions, shall receive reports regarding potential proliferation financing and shall have access, directly or indirectly, on a timely basis, to the financial, administrative and law-enforcement information that it requires in order to perform that function properly, including the analysis of suspicious transaction reports.

Article 24It shall be prohibited for credit and financial institutions:(a)to open an account with a credit or financial institution referred to in Article 21(2);(b)to establish a correspondent banking relationship with a credit or financial institution referred to in Article 21(2);(c)to open representative offices in the DPRK, or to establish a new branch or subsidiary, in the DPRK; and(d)to establish a joint venture with or to take an ownership interest in a credit or financial institution referred to in Article 21(2).

Article 251.By way of derogation from the prohibitions in points (b) and (d) of Article 24, the competent authorities of the Member States may authorise transactions if they have been approved by the Sanctions Committee in advance.2.The Member State concerned shall promptly notify the other Member States and the Commission of any authorisation under paragraph 1.

Article 26In accordance with the requirements of UNSCR 2270 (2016), credit and financial institutions shall, on 31 May 2016 at the latest:(a)close any account with a credit or financial institution referred to in Article 21(2);(b)terminate any correspondent banking relationship with a credit or financial institution referred to in Article 21(2);(c)close representative offices, branches, and subsidiaries in the DPRK;(d)terminate joint ventures with a credit or financial institution referred to in Article 21(2); and(e)relinquish any ownership interest in a credit or financial institution referred to in Article 21(2).

Article 271.By way of derogation from points (a) and (c) of Article 26, the competent authorities of the Member States may authorise certain representative offices, subsidiaries or accounts to remain operational, provided that the Sanctions Committee has determined on a case-by-case basis that such offices, subsidiaries or accounts are required for the delivery of humanitarian activities or the activities of diplomatic missions in the DPRK or the activities of the UN or its specialised agencies or related organisations or any other purpose consistent with the objectives of UNSCRs 1718 (2006), 1874 (2009), 2087 (2013), 2094 (2013), 2270 (2016), 2321 (2016) or 2371 (2017).2.The Member State concerned shall promptly notify the other Member States and the Commission of any authorisation granted pursuant to paragraph 1.

Article 281.It shall be prohibited for credit and financial institutions to open an account for DPRK diplomatic missions or consular posts, and their DPRK members.2.On 11 April 2017 at the latest, credit and financial institutions shall close any account held or controlled by a DPRK diplomatic mission or consular post, and their DPRK members.

Article 291.By way of derogation from Article 28(1), the competent authorities of the Member States may authorise, upon request of a DPRK diplomatic mission, consular post, or one of their members, the opening of one account per mission, post and member, provided that the mission or post is hosted in that Member State or the member of the mission or post is accredited to that Member State.2.By way of derogation from Article 28(2), the competent authorities of the Member States may authorise an account to remain open, upon request by a DPRK mission, post, or member, provided that the Member State has determined that:(i)the mission or post is hosted in that Member State or the member of that mission or post is accredited to that Member State; and(ii)the mission, post or its member does not hold any other account within that Member State.In the event that the mission, post or the DPRK member holds more than one account within that Member State, the mission, post, or member may indicate which account shall be retained.3.Subject to the applicable rules of the 1961 Vienna Convention on Diplomatic Relations and the 1963 Vienna Convention on Consular Relations, the Member States shall inform the other Member States and the Commission of the names and identifying information of any DPRK member of the diplomatic mission and consular post accredited to that Member State, at the latest on 13 March 2017, and of subsequent updates within one week.4.The competent authorities of the Member States may inform credit and financial institutions in that Member State of the identity of any DPRK member of a diplomatic mission or consular post accredited to that or any other Member State.5.The Member States shall inform the other Member States and the Commission of any authorisation granted pursuant to paragraphs 1 and 2.

Article 30It shall be prohibited:(a)to authorise the opening of a representative office or the establishment of a branch or subsidiary in the Union of a credit or financial institution referred to in Article 21(2);(b)to conclude agreements for, or on behalf of, a credit or financial institution referred to in Article 21(2) pertaining to the opening of a representative office or the establishment of a branch or subsidiary in the Union;(c)to grant an authorisation for taking up and pursuing the business of a credit institution or for any other business requiring prior authorisation, by a representative office, branch or subsidiary of a credit or financial institution referred to in Article 21(2), if the representative office, branch or subsidiary was not operational before 19 February 2013;(d)to acquire or to extend a participation, or to acquire any other ownership interest, in a credit or financial institution falling within the scope of Article 1 by any credit or financial institution referred to in Article 21(2); and(e)to operate or facilitate the operation of a representative office, branch or subsidiary of a credit or financial institution referred to in Article 21(2).

Article 31It shall be prohibited:(a)to sell or purchase public or public-guaranteed bonds issued after 19 February 2013, directly or indirectly, to or from any of the following:(i)the DPRK or its Government, and its public bodies, corporations and agencies;(ii)the Central Bank of the DPRK;(iii)any credit or financial institution referred to in Article 21(2);(iv)a natural person or a legal person, entity or body acting on behalf or at the direction of a legal person, entity or body referred to in point (i) or (ii);(v)a legal person, entity or body owned or controlled by a person, entity or body referred to in point (i), (ii) or (iii);(b)to provide brokering services with regard to public or public-guaranteed bonds issued after 19 February 2013 to a person, entity or body referred to in point (a);(c)to assist a person, entity or body referred to in point (a) in order to issue public or public-guaranteed bonds, by providing brokering services, advertising or any other service with regard to such bonds.

Article 32It shall be prohibited to provide financing or financial assistance for trade with the DPRK, including the granting of export credits, guarantees or insurance to natural or legal persons, entities or bodies involved in such trade.

Article 331.By way of derogation from Article 32, the competent authorities of the Member States may authorise financial support for trade with the DPRK, provided that the Member State has obtained the advance approval of the Sanctions Committee on a case-by-case basis.2.The Member State concerned shall inform the other Member States and the Commission of any authorisation granted under paragraph 1.

CHAPTER VFreezing of Funds and Economic Resources

Article 341.All funds and economic resources belonging to, owned, held or controlled by the persons, entities and bodies listed in Annexes XIII, XV, XVI and XVII shall be frozen.2.All vessels listed in Annex XIV shall be seized, if the Sanctions Committee has so specified.3.No funds or economic resources shall be made available, directly or indirectly, to or for the benefit of the natural or legal persons, entities or bodies listed in Annexes XIII, XV, XVI and XVII.4.Annex XIII shall include the persons, entities and bodies designated by the Sanctions Committee or the UNSC pursuant to paragraph 8(d) of UNSCR 1718 (2006), and paragraph 8 of UNSCR 2094 (2013).Annex XIV shall include the vessels that have been designated by the Sanctions Committee pursuant to paragraph 12 of UNSCR 2321 (2016) and paragraph 8 of UNSCR 2375 (2017).Annex XV shall include persons, entities and bodies not listed in Annex XIII and XIV, who, pursuant to point (b) of Article 27(1) of Decision (CFSP) 2016/849, or any equivalent subsequent provision, have been identified by the Council:(a)as responsible for, including through supporting or promoting, the DPRK's nuclear-related, ballistic missile-related or other weapons of mass destruction-related programmes, or persons, entities or bodies acting on their behalf or at their direction, or persons, entities or bodies owned or controlled by them, including through illicit means;(b)as providing financial services or the transfer to, through or from the territory of the Union, or involving nationals of Member States or entities organised under their laws, or persons or financial institutions in the territory of the Union, of any financial or other assets or resources that could contribute to the DPRK's nuclear-related, ballistic missile-related or other weapons of mass destruction-related programmes, or persons, entities or bodies acting on their behalf or at their direction, or persons, entities or bodies owned or controlled by them; or(c)as involved in, including through the provision of financial services, the supply to or from the DPRK of arms and related material of all types, or of items, materials, equipment, goods and technology which could contribute to the DPRK's nuclear-related, ballistic missile-related or other weapons of mass destruction-related programmes.5.Annex XVI shall include the persons, entities or bodies not covered by Annex XIII, XIV or XV who are working on behalf of or at the direction of a person, entity or body listed in Annex XIII, XIV or XV or persons assisting in the evasion of sanctions or violating the provisions of this Regulation.6.Annex XVII shall include the entities or bodies of the Government of the DPRK, or the Workers' Party of Korea, persons, entities or bodies acting on their behalf or at their direction, and entities or bodies owned or controlled by them, which are associated with the DPRK's nuclear or ballistic missile programs or other activities prohibited by UNSCR 1718 (2006), 1874 (2009), 2087 (2013), 2094 (2013), 2270 (2016), 2321 (2016) or 2371 (2017), and which are not covered by Annexes XIII, XIV, XV or XVI.7.Annexes XV, XVI and XVII shall be reviewed at regular intervals and at least every 12 months.8.Annexes XIII, XIV, XV, XVI and XVII shall include the grounds for the listing of listed persons, entities, bodies and vessels concerned.9.Annexes XIII, XIV, XV, XVI and XVII shall also include, where available, information necessary to identify the natural or legal persons, entities, bodies and vessels concerned. With regard to natural persons, such information may include names including aliases, date and place of birth, nationality, passport and ID card numbers, gender, address, if known, and function or profession. With regard to legal persons, entities and bodies, such information may include names, place and date of registration, registration number and place of business.7.The prohibition in paragraphs 1 and 3, inasmuch as they refer to the persons, entities or bodies listed in Annex XVII, shall not apply where the funds and economic resources are required to carry out the activities of the DPRK's missions to the UN and its specialised agencies and related organisations or other diplomatic and consular missions of the DPRK, or where the competent authority of the Member State has obtained advance approval of the Sanctions Committee on a case-by-case basis that the funds, financial assets or economic resources are required for the delivery of humanitarian assistance, denuclearisation or any other purpose consistent with the objectives of UNSCR 2270 (2016).8.Paragraph 3 shall not prevent financial or credit institutions in the Union from crediting frozen accounts where they receive funds transferred by third parties to the account of a listed natural or legal person, entity or body, provided that any additions to such accounts will also be frozen. The financial or credit institution shall notify the competent authorities about such transactions without delay.9.Provided that any such interest, other earnings and payments are frozen in accordance with paragraph 1, paragraph 3 shall not apply to the addition to frozen accounts of:(a)interest or other earnings on those accounts; and(b)payments due under contracts, agreements or obligations that were concluded or arose prior to the date on which the person, entity or body referred to in this article was designated.10.Paragraphs 1 and 3 shall not apply to the making available of funds or economic resources necessary to ensure the timely delivery of humanitarian assistance or to support other activities that support basic human needs where such assistance and other activities are carried out by:(a)the United Nations, including its programmes, funds and other entities and bodies, as well as its specialised agencies and related organisations;(b)international organisations;(c)humanitarian organisations having observer status with the United Nations General Assembly and members of those humanitarian organisations;(d)bilaterally or multilaterally funded non-governmental organisations participating in the United Nations Humanitarian Response Plans, Refugee Response Plans, other United Nations appeals or humanitarian clusters coordinated by the United Nations Office for the Coordination of Humanitarian Affairs (OCHA);(e)the employees, grantees, subsidiaries, or implementing partners of the entities mentioned in points (a) to (d) while and to the extent that they are acting in those capacities; or by,(f)appropriate other actors as determined by the Sanctions Committee as regards Annexes XIII, XVI and XVII, and by the Council as regards Annex XV.

Article 351.By way of derogation from Article 34, the competent authorities of the Member States may authorise the release of certain frozen funds or economic resources, or the making available of certain funds or economic resources, under the conditions they deem appropriate, where the following conditions are met:(a)after having determined that the funds or economic resources concerned are necessary to satisfy the basic needs of natural or legal persons, entities or bodies listed in Annexes XIII, XV, XVI or XVII and dependent family members of such natural persons, including payments for foodstuffs, rent or mortgage, medicines and medical treatment, taxes, insurance premiums and public utility charges and payments intended exclusively for:(i)reasonable professional fees and reimbursement of incurred expenses associated with the provision of legal services; or(ii)fees or services charges for routine holding or maintenance of frozen funds or economic resources; and(b)where the authorisation concerns a person, entity or body listed in Annex XIII, the Member State concerned has notified the Sanctions Committee of that determination and its intention to grant an authorisation, and the Sanctions Committee has not objected to that course of action within five working days of notification.2.By way of derogation from Article 34, the competent authorities of the Member States may authorise the release of certain frozen funds or economic resources or the making available of certain frozen funds or economic resources, after having determined that the funds or economic resources are necessary for extraordinary expenses, provided that:(a)where the authorisation concerns a person, entity or body listed in Annex XIII, the Sanctions Committee has been notified of this determination by the Member State concerned and that the determination has been approved by that Committee;(b)where the authorisation concerns a person, entity or body listed in Annex XV, XVI or XVII the Member State concerned has notified other Member States and the Commission of the grounds on which it considers that a specific authorisation should be granted, at least two weeks prior to the authorisation.3.The Member State concerned shall promptly notify the other Member States and the Commission of any authorisation granted under paragraphs 1 and 2.

Article 361.By way of derogation from Article 34, the competent authorities of the Member States may authorise the release of certain frozen funds or economic resources, where the following conditions are met:(a)the funds or economic resources are the subject of a judicial, administrative or arbitral decision established prior to the date on which the person, entity or body referred to in Article 34 was designated, or of a judicial, administrative or arbitral lien rendered prior to that date;(b)the funds or economic resources are to be used exclusively to satisfy claims secured by such a decision or recognised as valid in such a lien, within the limits set by applicable laws and regulations governing the rights of persons having such claims;(c)the decision or lien is not for the benefit of a person, entity or body listed in Annex XIII, XV, XVI or XVII;(d)recognising the decision or lien is not contrary to public policy in the Member State concerned;(e)the decision or lien in respect of persons, entities and bodies listed in Annex XIII has been notified by the Member State concerned to the Sanctions Committee.2.By way of derogation from Article 34, and provided that a payment by a person, entity or body listed in Annex XV, XVI or XVII is due under a contract or agreement that was concluded by, or under an obligation for the person, entity or body concerned that arose before the date on which that person, entity or body has been designated, the competent authorities of the Member States may authorise, under the conditions they deem appropriate, the release of certain frozen funds or economic resources, provided that the competent authority concerned has determined that:(a)the contract is not related to any item, operation, service or transaction referred to in point (a) of Article 3(1), Article 3(3) or Article 7; and(b)the payment is not directly or indirectly received by a person, entity or body listed in Annex XV, XVI or XVII.3.The Member State concerned shall, at least 10 days prior to the granting of each authorisation pursuant to paragraph 2, notify the other Member States and the Commission of that determination and of its intention to grant an authorisation.

Article 37Without prejudice to Article 34(10), the prohibitions in Article 34(1) and (3) shall not apply with regard to funds and economic resources belonging or made available to the Foreign Trade Bank or the Korean National Insurance Company (KNIC) in so far as such funds and economic resources are meant exclusively for the official purposes of a diplomatic or consular mission in the DPRK, or for humanitarian assistance activities which are undertaken by, or in coordination with, the United Nations.

CHAPTER VIRestrictions on Transport

Article 381.Cargo, including personal luggage and checked baggage, within or transiting through the Union, including airports, seaports and free zones, as referred to in Articles 243 to 249 of Regulation (EU) No 952/2013, shall be liable for inspection for the purposes of ensuring that it does not contain items prohibited by UNSCR 1718 (2006), 1874 (2009), 2087 (2013), 2094 (2013), 2270 (2016), 2321 (2016), 2371 (2017), or by this Regulation where:(a)the cargo originates from the DPRK;(b)the cargo is destined for the DPRK;(c)the cargo has been brokered or facilitated by the DPRK or its nationals or its individuals or entities acting on their behalf or at their direction, or entities owned or controlled by them;(d)the cargo has been brokered or facilitated by persons, entities or bodies listed in Annex XIII;(e)the cargo is being transported on a DPRK flagged vessel or aircraft registered to the DPRK, or on a stateless vessel or aircraft.2.Where the cargo within or transiting through the Union, including airports, seaports and free zones, falls outside of the scope of paragraph 1, it shall be liable for inspection where there are reasonable grounds to believe that it may contain items the sale, supply, transfer or export of which is prohibited by this Regulation in the following circumstances:(a)the cargo originates in the DPRK;(b)the cargo is destined for the DPRK; or(c)the cargo has been brokered or facilitated by the DPRK or its nationals or individuals or entities acting on their behalf.3.Paragraphs 1 and 2 shall be without prejudice to the inviolability and protection of diplomatic and consular bags provided for in the 1961 Vienna Convention on Diplomatic Relations and the 1963 Vienna Convention on Consular Relations.4.The provision of bunkering or ship-supply services, or any other servicing of vessels, to DPRK vessels is prohibited where the providers of the service have information, including from the competent customs authorities on the basis of the pre-arrival and pre-departure information referred to in Article 9(1), that provides reasonable grounds to believe that the vessels carry items whose supply, sale, transfer or export is prohibited by this Regulation, unless the provision of such services is necessary for humanitarian purposes.

Article 391.It shall be prohibited to provide access to ports in the territory of the Union to any vessel:(a)that is owned, operated or crewed by the DPRK;(b)that is flagged to the DPRK;(c)where there are reasonable grounds to believe that it is owned or controlled, directly or indirectly, by a person or entity listed in Annex XIII, XV, XVI or XVII;(d)where there are reasonable grounds to believe that it contains items the supply, sale, transfer or export of which is prohibited by this Regulation;(e)which has refused to be inspected after such an inspection has been authorised by the vessel's flag State or State of registration;(f)which is without nationality and has refused to be inspected in accordance with Article 38(1); or(g)that is listed under Annex XIV, if the Sanctions Committee has so specified.2.Paragraph 1 shall not apply:(a)in the case of an emergency;(b)where the vessel is returning to its port of origin;(c)in the case of a vessel coming into port for inspection where that concerns a vessel within the scope of points (a) to (e) of paragraph 1.

Article 401.By way of derogation from the prohibition in Article 39(1), where that concerns a vessel within the scope of points (a) to (e), the competent authorities of the Member States may authorise that vessel to come into port if:(a)the Sanctions Committee has determined in advance that this is required for humanitarian purposes or any other purpose consistent with the objectives of UNSCR 2270 (2016); or(b)the Member State has determined in advance that this is required for humanitarian purposes or any other purpose consistent with the objectives of this Regulation.2.By way of derogation from the prohibition in Article 39(1), where that concerns a vessel within the scope of point (f), the competent authorities of the Member States may authorise that vessel to come into port if the Sanctions Committee has so directed.3.By way of derogation from the prohibition in Article 39(1), where that concerns a vessel within the scope of point (g), the competent authorities of the Member States may authorise a vessel to come into port if the Sanctions Committee has determined in advance that such entry is required for humanitarian purposes or any other purposes consistent with the objectives of UNSCRs 1718 (2006), 1874 (2009), 2087 (2013), 2094 (2013), 2270 (2016), 2321 (2016), 2356 (2017), 2371 (2017) or 2375 (2017).

Article 411.It shall be prohibited for any aircraft operated by DPRK carriers or originating from the DPRK to take off from, land in or overfly the territory of the Union.2.Paragraph 1 shall not apply:(a)where the aircraft is landing for inspection;(b)in the case of an emergency landing.

Article 42By way of derogation from Article 41, the competent authorities of the Member States may authorise an aircraft to take off from, land in or overfly the territory of the Union if those competent authorities have determined in advance that this is required for humanitarian purposes or any other purpose consistent with the objectives of this Regulation.

Article 431.It shall be prohibited:(a)to lease or charter vessels or aircraft or provide crew services to the DPRK, persons or entities listed in Annex XIII, XV, XVI or XVII, any other DPRK entities, any other persons or entities which have assisted in violating the provisions of UNSCR 1718 (2006), 1874 (2009), 2087 (2013), 2094 (2013), 2270 (2016), 2321 (2016) or 2371 (2017) or any person or entity acting on behalf of, or at the direction of, any such person or entity, and entities owned or controlled by them;(b)to procure vessel or aircraft crew services from the DPRK;(c)to own, lease, operate, charter, insure or provide vessel classification services or associated services to any vessel flagged to the DPRK;(d)to provide vessel classification services to vessels listed in Annex XVIII;(e)to apply for or to assist in the registration or maintenance on the register of any vessel that is owned, controlled or operated by the DPRK or DPRK nationals, any vessel listed in Annex XVIII or that has been deregistered by another State pursuant to paragraph 24 of UNSCR 2321 (2016), paragraph 8 of UNSCR 2375 (2017) or paragraph 12 of UNSCR 2397 (2017); or(f)to provide insurance or reinsurance services to vessels owned, controlled or operated by the DPRK or vessels listed in Annex XVIII.2.Annex XVIII shall include the vessels not listed in Annex XIV, which the Council has reasons to believe were involved in activities, or the transport of items, prohibited by UNSCRs 1718 (2006), 1874 (2009), 2087 (2013), 2094 (2013), 2270 (2016), 2321 (2016), 2356 (2017), 2371 (2017), 2375 (2017) or 2397 (2017).

Article 441.By way of derogation from the prohibition in point (a) of Article 43(1), the competent authorities of the Member States may authorise the leasing, chartering or provision of crew services, provided that the Member State has obtained the advance approval of the Sanctions Committee on a case-by-case basis.2.By way of derogation from the prohibitions in points (c) and (e) of Article 43(1), the competent authorities of the Member States may authorise the owning, leasing, operating, chartering of, or providing vessel classification services or associated services to any DPRK flagged vessel, or the registration, or maintenance on the register, of any vessel that is owned, controlled or operated by the DPRK or DPRK nationals, provided that the Member State has obtained the advance approval of the Sanctions Committee on a case-by-case basis.3.By way of derogation from the prohibition in point (d) of Article 43(1), the competent authorities of the Member States may authorise vessel classification services to vessels listed in Annex XVIII, provided that the Member State has obtained the advance approval of the Sanctions Committee on a case-by-case basis.4.By way of derogation from the prohibitions in point (e) of Article 43(1), the competent authorities of the Member States may authorise the registration of a vessel that has been deregistered by another State pursuant to paragraph 12 of UNSCR 2397 (2017), provided that the Member State has obtained the advance approval of the Sanctions Committee on a case-by-case basis.5.By way of derogation from the prohibition in point (f) of Article 43(1), the competent authorities of the Member States may authorise the provision of insurance or reinsurance services, provided that the Sanctions Committee has determined in advance on a case-by-case basis that the vessel is engaged in activities exclusively for livelihood purposes which will not be used by DPRK individuals or entities to generate revenue or exclusively for humanitarian purposes.6.The Member State concerned shall inform the other Member States and the Commission of any authorisation granted under paragraphs 1, 2, 3, 4 and 5.

Article 44aIt shall be prohibited to facilitate or engage in ship-to-ship transfers to or from any DPRK flagged vessel of any goods or items that are being sold, supplied, transferred or exported to or from the DPRK.

CHAPTER VIIGeneral and Final Provisions

Article 451.Without prejudice to Article 34(10), the competent authorities of the Member States may authorise any activities otherwise prohibited by UNSCR 1718 (2006), 1874 (2009), 2087 (2013), 2094 (2013), 2270 (2016), 2321 (2016), 2356 (2017), 2371 (2017), 2375 (2017) or 2397 (2017) if the Sanctions Committee has determined, on a case-by-case basis, that they are necessary to facilitate the work of international and non-governmental organisations carrying out assistance and relief activities in the DPRK for the benefit of the civilian population in the DPRK or for any other purpose consistent with the objectives of those UNSCRs.2.The Member State concerned shall inform the other Member States and the Commission of any authorisation granted under paragraph 1.

Article 45a1.Unless otherwise provided for in this Regulation, and by way of derogation from the prohibitions arising from UNSCR 1718 (2006), 1874 (2009), 2087 (2013), 2094 (2013), 2270 (2016), 2321 (2016), 2356 (2017), 2371 (2017), 2375 (2017) or 2397 (2017), the competent authorities of Member States may authorise any activities, on a case-by-case basis, which are necessary for the functioning of diplomatic missions or consular posts in the DPRK pursuant to the 1961 and 1963 Vienna Conventions, or of international organisations enjoying immunities in accordance with international law in the DPRK.2.The Member State concerned shall inform the other Member States and the Commission of any authorisation granted under paragraph 1.

Article 46The Commission shall be empowered to:(a)amend Annex I on the basis of information supplied by Member States;(b)amend Parts II, III, IV, V, VI, VII, VIII and IX of Annex II and Annexes VI, VII, IX, X, XI, Xia, XIb, XIc, XId, XIe, XIf, XIg, XIh, XIi, XIj, XIk and XIl on the basis of determinations made by either the Sanctions Committee or the UNSC and to update nomenclature codes from the Combined Nomenclature as set out in Annex I to Regulation (EEC) No 2658/87;(c)amend Annex VIII in order to refine or adapt the list of goods included therein, taking into account any definition or guidelines that may be promulgated by the Sanctions Committee or to update nomenclature codes from the Combined Nomenclature as set out in Annex I to Regulation (EEC) No 2658/87;(d)amend Annexes III, IV and V on the basis of determinations made by either the Sanctions Committee or the UNSC, or decisions taken concerning these Annexes in Decision (CFSP) 2016/849;(e)amend Annex XII in order to refine or adapt the list of services included therein, taking into account information provided by Member States as well as any definition or guidelines that may be issued by the United Nations Statistical Commission, or in order to add reference numbers taken from the Central Product Classification system for goods and services promulgated by the United Nations Statistical Commission.

Article 471.Where the Security Council or the Sanctions Committee lists a natural or legal person, entity or body, the Council shall include such natural or legal person, entity or body in Annex XIII and XIV.2.Where the Council decides to subject a natural or legal person, entity or body to the measures referred to in Article 34(1), (2) or (3) or to designate a vessel pursuant to Article 43 it shall amend Annexes XV, XVI, XVII and XVIII accordingly.3.The Council shall communicate its decision to the natural or legal person, entity or body referred to in paragraphs 1 and 2, including the grounds for listing, either directly, if the address is known, or through the publication of a notice, providing that natural or legal person, entity or body with an opportunity to present observations.4.Where observations are submitted, or where substantial new evidence is presented, the Council shall review its decision and inform the natural or legal person, entity or body referred to in paragraphs 1 and 2 accordingly.5.Where the United Nations decides to delist a natural or legal person, entity or body, or to amend the identifying data of a listed natural or legal person, entity or body, the Council shall amend Annexes XIII and XIV accordingly.

Article 47a1.Annexes XV, XVI, XVII and XVIII shall be reviewed at regular intervals and at least every 12 months.2.Annexes XIII, XIV, XV, XVI, XVII and XVIII shall include the grounds for the listing of persons, entities, bodies and vessels concerned.3.Annexes XIII, XIV, XV, XVI, XVII and XVIII shall also include, where available, information necessary to identify the natural or legal persons, entities, bodies and vessels concerned. With regard to natural persons, such information may include names including aliases, date and place of birth, nationality, passport and ID card numbers, gender, address, if known, and function or profession. With regard to legal persons, entities and bodies, such information may include names, place and date of registration, registration number and place of business.

Article 48The Commission and Member States shall immediately notify each other of the measures taken under this Regulation and shall supply each other with any other relevant information at their disposal in connection with this Regulation, in particular information in respect of violations and enforcement problems and judgments handed down by national courts.

Article 491.Member States shall designate the competent authorities referred to in this Regulation and identify them in, or through, the websites as listed in Annex I.2.Member States shall notify the Commission of their competent authorities without delay after the entry into force of this Regulation and shall notify it of any subsequent amendment.

Article 501.Without prejudice to the applicable rules concerning reporting, confidentiality and professional secrecy, natural and legal persons, entities and bodies shall:(a)supply immediately any information which would facilitate compliance with this Regulation, such as accounts and amounts frozen in accordance with Article 34, to the competent authorities of the Member States, where they are resident or located, and shall promptly transmit such information, directly or through the relevant Member States, to the Commission and;(b)cooperate with the competent authorities, in any verification of this information.2.Any additional information directly received by the Commission shall promptly be made available to the Member State concerned.3.Any information provided or received in accordance with this Article shall be used only for the purposes for which it was provided or received.

Article 51The Commission shall process personal data in order to carry out the tasks incumbent on it under this Regulation and in accordance with the provisions of Regulation (EC) No 45/2001.

Article 52It shall be prohibited to participate knowingly and intentionally in activities the object or effect of which is to circumvent the prohibitions contained in this Regulation.

Article 531.No claims in connection with any contract or transaction the performance of which has been affected, directly or indirectly, in whole or in part, by the measures imposed by this Regulation, including claims for indemnity or any other claim of that type, such as a claim for compensation or a claim under a guarantee, notably a claim for extension or payment of a bond, guarantee or indemnity, particularly a financial guarantee or financial indemnity, of whatever form, shall be satisfied, if they are made by:(a)designated persons, entities or bodies listed in Annex XIII, XV, XVI or XVII, or the shipowners of vessels listed in Annex XIV or Annex XVIII;(b)any other DPRK person, entity or body, including the Government of the DPRK and its public bodies, corporations and agencies;(c)any person, entity or body acting through or on behalf of one of the persons, entities or bodies referred to in points (a) and (b).2.The performance of a contract or transaction shall be regarded as having been affected by the measures imposed by this Regulation where the existence or content of the claim results directly or indirectly from those measures.3.In any proceedings for the enforcement of a claim, the onus of proving that satisfying the claim is not prohibited by paragraph 1 shall be on the person seeking the enforcement of that claim.4.This Article is without prejudice to the right of the persons, entities and bodies referred to in paragraph 1 to judicial review of the legality of the non-performance of contractual obligations in accordance with this Regulation.

Article 541.The freezing of funds and economic resources or the refusal to make funds or economic resources available, carried out in good faith on the basis that such action is in accordance with this Regulation, shall not give rise to liability of any kind on the part of the natural or legal person, entity or body implementing it, or its directors or employees, unless it is proven that the funds and economic resources were frozen or withheld as a result of negligence.2.Actions by natural or legal persons, entities or bodies shall not give rise to liability of any kind on their part, if they did not know, and had no reasonable cause to suspect, that their actions would infringe the measures set out in this Regulation.

Article 551.Member States shall lay down the rules on penalties applicable to infringements of this Regulation and shall take all measures necessary to ensure that they are implemented. The penalties provided for shall be effective, proportionate and dissuasive.2.Member States shall notify the Commission of those rules without delay after the entry into force of this Regulation and shall notify it of any subsequent amendment.

Article 56Regulation (EC) No 329/2007 is hereby repealed. References to the repealed Regulation shall be construed as references to this Regulation.

Article 57This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.

This Regulation shall be binding in its entirety and directly applicable in all Member States.ANNEX IBELGIUMhttps://diplomatie.belgium.be/en/policy/policy_areas/peace_and_security/sanctionsBULGARIAhttps://www.mfa.bg/en/EU-sanctionsCZECHIAwww.financnianalytickyurad.cz/mezinarodni-sankce.htmlDENMARKhttp://um.dk/da/Udenrigspolitik/folkeretten/sanktioner/GERMANYhttps://www.bmwi.de/Redaktion/DE/Artikel/Aussenwirtschaft/embargos-aussenwirtschaftsrecht.htmlESTONIAhttps://vm.ee/et/rahvusvahelised-sanktsioonidIRELANDhttps://www.dfa.ie/our-role-policies/ireland-in-the-eu/eu-restrictive-measures/GREECEhttp://www.mfa.gr/en/foreign-policy/global-issues/international-sanctions.htmlSPAINhttps://www.exteriores.gob.es/es/PoliticaExterior/Paginas/SancionesInternacionales.aspxFRANCEhttp://www.diplomatie.gouv.fr/fr/autorites-sanctions/CROATIAhttps://mvep.gov.hr/vanjska-politika/medjunarodne-mjere-ogranicavanja/22955ITALYhttps://www.esteri.it/it/politica-estera-e-cooperazione-allo-sviluppo/politica_europea/misure_deroghe/CYPRUShttps://mfa.gov.cy/themes/LATVIAhttp://www.mfa.gov.lv/en/security/4539LITHUANIAhttp://www.urm.lt/sanctionsLUXEMBOURGhttps://maee.gouvernement.lu/fr/directions-du-ministere/affaires-europeennes/organisations-economiques-int/mesures-restrictives.htmlHUNGARYhttps://kormany.hu/kulgazdasagi-es-kulugyminiszterium/ensz-eu-szankcios-tajekoztatoMALTAhttps://foreignandeu.gov.mt/en/Government/SMB/Pages/SMB-Home.aspxNETHERLANDShttps://www.rijksoverheid.nl/onderwerpen/internationale-sanctiesAUSTRIAhttps://www.bmeia.gv.at/themen/aussenpolitik/europa/eu-sanktionen-nationale-behoerden/POLANDhttps://www.gov.pl/web/dyplomacja/sankcje-miedzynarodowehttps://www.gov.pl/web/diplomacy/international-sanctionsPORTUGALhttps://www.portaldiplomatico.mne.gov.pt/politica-externa/medidas-restritivasROMANIAhttp://www.mae.ro/node/1548SLOVENIAhttp://www.mzz.gov.si/si/omejevalni_ukrepiSLOVAKIAhttps://www.mzv.sk/europske_zalezitosti/europske_politiky-sankcie_euFINLANDhttps://um.fi/pakotteetSWEDENhttps://www.regeringen.se/sanktionerAddress for notifications to the European Commission:European CommissionDirectorate-General for Financial Stability, Financial Services and Capital Markets Union (DG FISMA)Rue de Spa 2B-1049 Brussels, BelgiumE-mail: relex-sanctions@ec.europa.euANNEX IIGoods and technology referred to in points (a) and (c) of Article 3(1) and in Article 7The notes, acronyms and abbreviations, and the definitions in Annex I to Regulation (EC) No 428/2009 apply for the purpose of this Annex.PART IAll goods and technology listed in Annex I to Regulation (EC) No 428/2009.PART IIOther items, materials, equipment, goods and technology which could contribute to DPRK's nuclear-related, other weapons of mass destruction-related or ballistic missile-related programmes.Unless otherwise stated, reference numbers used in the column entitled "Description" refer to the descriptions of dual use items and technology set out in Annex I to Regulation (EC) No 428/2009.A reference number in the column entitled "Related item from Annex I to Regulation (EC) No 428/2009" means that the characteristics of the item described in the column "Description" lie outside the parameters set out in the description of the dual use entry referred to.Definitions of terms between "single quotation marks" are given in a technical note to the relevant item.Definitions of terms between "double quotation marks" can be found in Annex I to Regulation (EC) No 428/2009, except the following:GENERAL NOTESThe object of the prohibitions contained in this Annex should not be defeated by the export of any non-prohibited goods (including plant) containing one or more prohibited components when the prohibited component or components are the principal element of the goods and can feasibly be removed or used for other purposes.N.B.: In judging whether the prohibited component or components are to be considered the principal element, it is necessary to weigh the factors of quantity, value and technological know-how involved and other special circumstances which might establish the prohibited component or components as the principal element of the goods being procured.Goods specified in this Annex include both new and used goods.GENERAL TECHNOLOGY NOTE (GTN)(To be read in conjunction with Part C)The sale, supply, transfer or export of "technology" which is "required" for the "development", "production" or "use" of goods the sale, supply, transfer or export of which is prohibited in Part A (Goods), is prohibited in accordance with the provisions of Part B.The "technology" "required" for the "development", "production" or "use" of prohibited goods remains under prohibition even when applicable to non-prohibited goods.Prohibitions do not apply to that "technology" which is the minimum necessary for the installation, operation, maintenance (checking) and repair of those goods which are not prohibited.Prohibitions on "technology" transfer do not apply to information "in the public domain", to "basic scientific research" or to the minimum necessary information for patent applications.A.GOODSII.A0.NUCLEAR MATERIALS, FACILITIES, AND EQUIPMENT

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
II.A0.001	Hollow cathode lamps as follows:a.Iodine hollow cathode lamps with windows in pure silicon or quartz;b.Uranium hollow cathode lamps.	N/A
II.A0.002	Faraday isolators in the wavelength range 500 nm – 650 nm.	N/A
II.A0.003	Optical gratings in the wavelength range 500 nm – 650 nm.	N/A
II.A0.004	Optical fibres in the wavelength range 500 nm – 650 nm coated with anti-reflecting layers in the wavelength range500 nm – 650 nm and having a core diameter greater than 0,4 mm but not exceeding 2 mm.	N/A
II.A0.005	Nuclear reactor vessel components and testing equipment, other than those specified in 0A001, as follows:a.Seals;b.Internal components;c.Sealing, testing and measurement equipment.	0A001
II.A0.006	Nuclear detection systems, other than those specified in 0A001.j. or 1A004.c., for detection, identification or quantification of radioactive materials or radiation of nuclear origin and specially designed components thereof.N.B: For personal equipment refer to II.A1.004 below.	0A001.j.1A004.c.
II.A0.007	Bellows-sealed valves other than those specified in 0B001.c.6., 2A226 or 2B350, made of aluminium alloy or stainless steel type 304, 304L or 316L.	0B001.c.6.2A2262B350
II.A0.008	Laser mirrors, other than those specified in 6A005.e., consisting of substrates having a thermal expansion coefficient of 10– 6 K– 1 or less at 20 °C (e.g. fused silica or sapphire).Note: This item does not cover optical systems specially designed for astronomical applications, except if the mirrors contain fused silica.	0B001.g.5.6A005.e.
II.A0.009	Laser lenses, other than those specified in 6A005.e.2, consisting of substrates having a thermal expansion coefficient of 10– 6 K– 1 or less at 20 °C (e.g. fused silica).	0B001.g.6A005.e.2.
II.A0.010	Pipes, piping, flanges, fittings made of, or lined with nickel, or nickel alloy containing more than 40 % nickel by weight, other than those specified in 2B350.h.1.	2B350
II.A0.011	Vacuum pumps other than those specified in 0B002.f.2. or 2B231, as follows:a.Turbo-molecular pumps having a flow-rate equal to or greater than 400 l/s;b.Roots type vacuum roughing pumps having a volumetric aspiration flow-rate greater than 200 m3/h;c.Bellows-sealed, scroll, dry compressor, and bellows-sealed, scroll, dry vacuum pumps.	0B002.f.2.2B231
II.A0.012	Shielded enclosures for the manipulation, storage and handling of radioactive substances (hot cells).	0B006
II.A0.013	"Natural uranium" or "depleted uranium" or thorium in the form of metal, alloy, chemical compound or concentrate and any other material containing one or more of the foregoing, other than those specified in 0C001.	0C001
II.A0.014	Detonation chambers having a capacity of explosion absorption of more than 2,5 kg TNT equivalent.	N/A

II.A1.SPECIAL MATERIALS AND RELATED EQUIPMENT

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
II.A1.001	Bis(2-ethylhexyl) phosphoric acid (HDEHP or D2HPA) Chemical Abstract Number (CAS): [CAS 298-07-7] solvent in any quantity, with a purity greater than 90 %.	N/A
II.A1.002	Fluorine gas CAS: [7782-41-4], with a purity of at least 95 %.	N/A
II.A1.003	Ring-shaped seals and gaskets, having an inner diameter of 400 mm or less, made of any of the following materials:a.Copolymers of vinylidene fluoride having 75 % or more beta crystalline structure without stretching;b.Fluorinated polyimides containing 10 % by weight or more of combined fluorine;c.Fluorinated phosphazene elastomers containing 30 % by weight or more of combined fluorine;d.Polychlorotrifluoroethylene (PCTFE, e.g. Kel-F ®);e.Fluoro-elastomers (e.g. Viton ®, Tecnoflon ®);f.Polytetrafluoroethylene (PTFE).	1A001
II.A1.004	Personal equipment for detecting radiation of nuclear origin, other than that specified in 1A004.c., including personal dosimeters.	1A004.c.
II.A1.005	Electrolytic cells for fluorine production, other than those specified in 1B225, with an output capacity greater than 100 g of fluorine per hour.	1B225
II.A1.006	Catalysts, other than those specified in 1A225 or 1B231, containing platinum, palladium or rhodium, usable for promoting the hydrogen isotope exchange reaction between hydrogen and water for the recovery of tritium from heavy water or for the production of heavy water.	1A2251B231
II.A1.007	Aluminium and its alloys, other than those specified in 1C002.b.4. or 1C202.a., in crude or semi-fabricated form having either of the following characteristics:a."Capable of" an ultimate tensile strength of 460 MPa or more at 293 K (20 °C); orb.Having a tensile strength of 415 MPa or more at 298 K (25 °C).Technical note:The phrase alloys "capable of" encompasses alloys before or after heat treatment.	1C002.b.4.1C202.a.
II.A1.008	Magnetic metals, of all types and of whatever form, other than those specified in 1C003.a. having an "initial relative permeability" of 120000 or more and a thickness between 0,05 mm and 0,1 mm.Technical note:Measurement of "initial relative permeability" must be performed on fully annealed materials.	1C003.a.
II.A1.009	"Fibrous or filamentary materials" or prepregs, other than those specified in 1C010.a., 1C010.b., 1C210.a. or 1C210.b., as follows:a.Aramid "fibrous or filamentary materials" having either of the following characteristics:1.A "specific modulus" exceeding 10 × 106 m; or2.A "specific tensile strength" exceeding 17 × 104 m;b.Glass "Gfibrous or filamentary materials" having either of the following characteristics:1.A "specific modulus" exceeding 3,18 × 106 m; or2.A "specific tensile strength" exceeding 76,2 × 103 m;c.Thermoset resin-impregnated continuous "yarns", "rovings", "tows" or "tapes" with a width of 15 mm or less (once prepregs), made from glass "fibrous or filamentary materials" other than those specified in I.A1.010.a. below;d.Carbon "fibrous or filamentary materials";e.Thermoset resin-impregnated continuous "yarns", "rovings", "tows", or "tapes", made from carbon "fibrous or filamentary materials";f.Polyacrylonitrile (PAN) continuous "yarns", "rovings", "tows" or "tapes";g.Para-aramid "fibrous or filamentary materials" (Kevlar® and other Kevlar®-like fibres).	1C010.a.1C010.b.1C210.a.1C210.b.
II.A1.010	Resin-impregnated or pitch-impregnated fibres (prepregs), metal or carbon-coated fibres (preforms) or "carbon fibre preforms", as follows:a.Made from "fibrous or filamentary materials" specified in II.A1.009 above;b.Epoxy resin "matrix" impregnated carbon "fibrous or filamentary materials" (prepregs), specified in 1C010.a., 1C010.b. or 1C010.c., for the repair of aircraft structures or laminates, of which the size of individual sheets does not exceed 50 cm × 90 cm;c.Prepregs specified in 1C010.a., 1C010.b. or 1C010.c., when impregnated with phenolic or epoxy resins having a glass transition temperature (Tg) less than 433 K (160 °C) and a cure temperature lower than the glass transition temperature.	1C0101C210
II.A1.011	Reinforced silicon carbide ceramic composites usable for nose tips, re-entry vehicles, nozzle flaps, usable in "missiles", other than those specified in 1C107.	1C107
II.A1.012	Not used.
II.A1.013	Tantalum, tantalum carbide, tungsten, tungsten carbide and alloys thereof, other than those specified in 1C226, having both of the following characteristics:a.In forms having a hollow cylindrical or spherical symmetry (including cylinder segments) with an inside diameter between 50 mm and 300 mm; andb.A mass greater than 5 kg.	1C226
II.A1.014	"Elemental powders" of cobalt, neodymium or samarium or alloys or mixtures thereof containing at least 20 % by weight of cobalt, neodymium or samarium, with a particle size less than 200 μm.Technical note: "Elemental powder" means a high purity powder of one element.	N/A
II.A1.015	Pure tributyl phosphate (TBP) [CAS No 126-73-8] or any mixture having a TBP content of more than 5 % by weight.	N/A
II.A1.016	Maraging steel, other than those specified by 1C116 or 1C216.Technical notes:1.The phrase maraging steel "capable of" encompasses maraging steel before or after heat treatment.2.Maraging steels are iron alloys generally characterised by high nickel, very low carbon content and the use of substitutional elements or precipitates to produce strengthening and age-hardening of the alloy.	1C1161C216
II.A1.017	Metals, metal powders and material as follows:a.Tungsten and tungsten alloys, other than those specified in 1C117, in the form of uniform spherical or atomized particles of 500 μm (micrometre) diameter or less with a tungsten content of 97 % by weight or more;b.Molybdenum and molybdenum alloys, other than those specified in 1C117, in the form of uniform spherical or atomized particles of 500 μm diameter or less with a molybdenum content of 97 % by weight or more;c.Tungsten materials in the solid form, other than those specified in 1C226 having material compositions as follows:1.Tungsten and alloys containing 97 % by weight or more of tungsten;2.Copper infiltrated tungsten containing 80 % by weight or more of tungsten; or3.Silver infiltrated tungsten containing 80 % by weight or more of tungsten.	1C1171C226
II.A1.018	Soft magnetic alloys, other than those specified in 1C003, having a chemical composition as follows:a.Iron content between 30 % and 60 %; andb.Cobalt content between 40 % and 60 %.	1C003
II.A1.019	Not used.
II.A1.020	Graphite, other than that specified in 0C004 or 1C107.a., designed or specified for use in Electrical Discharge Machining (EDM) machines.	0C0041C107.a.
II.A1.021	Steel alloys in sheet or plate form, having any of the following characteristics:(a)Steel alloys "capable of" ultimate tensile strength of 1200 MPa or more, at 293 K (20 °C); or(b)Nitrogen-stabilised duplex stainless steel.Note: the phrase alloys "capable of" encompasses alloys before or after heat treatment.Technical note: "nitrogen-stabilised duplex stainless steel" has a two-phase microstructure consisting of grains of ferritic and austenitic steel with the addition of nitrogen to stabilise the microstructure.	1C1161C216
II.A1.022	Carbon-Carbon Composite material.	1A002.b.1
II.A1.023	Nickel alloys in crude or semi-fabricated form, containing 60 % by weight or more nickel.	1C002.c.1.a
II.A1.024	Titanium alloys in sheet or plate form "capable of" an ultimate tensile strength of 900 MPa or more at 293 K (20 °C).Note: the phrase alloys "capable of" encompasses alloys before or after heat treatment.	1C002.b.3
II.A1.025	Titanium alloys, other than those specified in 1C002 and 1C202.	1C0021C202
II.A1.026	Zirconium and zirconium alloys, other than those specified in 1C011, 1C111 and 1C234.	1C0111C1111C234
II.A1.027	Explosive materials other than those specified in 1C239, or materials or mixtures containing more than 2 % by weight of such explosive materials, with a crystalline density higher than 1,5 g/cm3 and with a detonation speed higher than 5000 m/s.	1C239

II.A2.MATERIALS PROCESSING

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
II.A2.001	Vibration test systems, equipment and components thereof, other than those specified in 2B116:a.Vibration test systems employing feedback or closed loop techniques and incorporating a digital controller, capable of vibrating a system at an acceleration equal to or greater than 0,1 g rms between 0,1 Hz and 2 kHz and imparting forces equal to or greater than 50 kN, measured "bare table";b.Digital controllers, combined with specially designed vibration test "software", with a "real-time control bandwidth" greater than 5 kHz designed for use with vibration test systems specified in a.;Technical note: "Real-time control bandwidth" is defined as the maximum rate at which a controller can execute complete cycles of sampling, processing data and transmitting control signals.c.Vibration thrusters (shaker units), with or without associated amplifiers, capable of imparting a force equal to or greater than 50 kN, measured "bare table", and usable in vibration test systems specified in a.;d.Test piece support structures and electronic units designed to combine multiple shaker units in a system capable of providing an effective combined force equal to or greater than 50 kN, measured "bare table", and usable in vibration systems specified in a.Technical note: "bare table" means a flat table, or surface, with no fixture or fittings.	2B116
II.A2.002	Machine tools, other than those specified in 2B001 or 2B201 and any combination thereof, for removing (or cutting) metals, ceramics, or "composites" that, according to the manufacturer's technical specification, can be equipped with electronic devices for "numerical control", having positioning accuracies of equal to or less (better) than 30 μm according to ISO 230/2 (1988) or national equivalents along any linear axis.Technical note: Manufacturers calculating positioning accuracy in accordance with ISO 230/2 (1997) should consult the competent authorities of the Member State in which they are established.	2B0012B201
II.A2.002a	Components and numerical controls, specially designed for machine tools specified in 2B001, 2B201 or I.A2.002 above.	N/A
II.A2.003	Balancing machines and related equipment as follows:a.Balancing machines, designed or modified for dental or other medical equipment, having all the following characteristics:1.Not capable of balancing rotors/assemblies having a mass greater than 3 kg;2.Capable of balancing rotors/assemblies at speeds greater than 12500 rpm;3.Capable of correcting unbalance in two planes or more; and4.Capable of balancing to a residual specific unbalance of 0,2 g × mm per kg of rotor mass;b."Indicator heads" designed or modified for use with machines specified in a. above.Technical note: "Indicator heads" are sometimes known as balancing instrumentation.	2B119
II.A2.004	Remote manipulators that can be used to provide remote actions in radiochemical separation operations or hot cells, other than those specified in 2B225, having either of the following characteristics:a.A capability of penetrating a hot cell wall of 0,3 m or more (through the wall operation); orb.A capability of bridging over the top of a hot cell wall with a thickness of 0,3 m or more (over the wall operation).Technical note: Remote manipulators provide translation of human operator actions to a remote operating arm and terminal fixture. They may be of master/slave type or operated by joystick or keypad.	2B225
II.A2.005	Controlled atmosphere heat treatment furnaces or oxidation furnaces capable of operation at temperatures above 400 °C.Note: This item does not cover tunnel kilns with roller or car conveyance, tunnel kilns with conveyor belt, pusher type kilns or shuttle kilns, specially designed for the production of glass, tableware ceramics or structural ceramics.	2B2262B227
II.A2.006	Not used.
II.A2.007	"Pressure transducers", other than those defined in 2B230, capable of measuring absolute pressures at any point in the range 0 to 200 kPa and having both of the following characteristics:a.Pressure sensing elements made of or protected by "Materials resistant to corrosion by uranium hexafluoride (UF6)"; andb.Having either of the following characteristics:1.A full scale of less than 200 kPa and an "accuracy" of better than ± 1 % of full scale; or2.A full scale of 200 kPa or greater and an "accuracy" of better than 2 kPa.Technical note: For the purposes of 2B230 "accuracy" includes non-linearity, hysteresis and repeatability at ambient temperature.	2B230
II.A2.008	Liquid-liquid contacting equipment (mixer-settlers, pulsed columns, plate columns, centrifugal contactors); and liquid distributors, vapour distributors or liquid collectors designed for such equipment, where all surfaces that come in direct contact with the chemical(s) being processed are made from any of the following materials:a.Alloys with more than 25 % nickel and 20 % chromium by weight;b.Fluoropolymers;c.Glass (including vitrified or enamelled coating or glass lining);d.Graphite or "carbon graphite";e.Nickel or alloys with more than 40 % nickel by weight;f.Tantalum or tantalum alloys;g.Titanium or titanium alloys;h.Zirconium or zirconium alloys; ori.Stainless steel.Technical note: "Carbon graphite" is a composition consisting of amorphous carbon and graphite, in which the graphite content is 8 % or more by weight.	2B350.e.
II.A2.009	Industrial equipment and components, other than those specified in 2B350.d., as follows:Heat exchangers or condensers with a heat transfer surface area greater than 0,05 m2, and less than 30 m2; and tubes, plates, coils or blocks (cores) designed for such heat exchangers or condensers, where all surfaces that come in direct contact with the fluid(s) are made from any of the following materials:a.Alloys with more than 25 % nickel and 20 % chromium by weight;b.Fluoropolymers;c.Glass (including vitrified or enamelled coating or glass lining);d.Graphite or "carbon graphite";e.Nickel or alloys with more than 40 % nickel by weight;f.Tantalum or tantalum alloys;g.Titanium or titanium alloys;h.Zirconium or zirconium alloys;i.Silicon carbide;j.Titanium carbide; ork.Stainless steel.Note: This item does not cover vehicle radiators.Technical note: The materials used for gaskets and seals and other implementation of sealing functions do not determine the status of control of the heat exchanger.	2B350.d.
II.A2.010	Multiple-seal, and seal-less pumps, other than those specified in 2B350.i, suitable for corrosive fluids, or vacuum pumps and casings (pump bodies), preformed casing liners, impellers, rotors or jet pump nozzles designed for such pumps, in which all surfaces that come in direct contact with the chemical(s) being processed are made from any of the following materials:a.Alloys with more than 25 % nickel and 20 % chromium by weight;b.Ceramics;c.Ferrosilicon;d.Fluoropolymers;e.Glass (including vitrified or enamelled coatings or glass lining);f.Graphite or "carbon graphite";g.Nickel or alloys with more than 40 % nickel by weight;h.Tantalum or tantalum alloys;i.Titanium or titanium alloys;j.Zirconium or zirconium alloys;k.Niobium (columbium) or niobium alloys;l.Stainless steel;m.Aluminium alloys; orn.Rubber.Technical notes: The materials used for gaskets and seals and other implementations of sealing functions do not determine the status of control of the pump.The term "rubber" encompasses all kinds of natural and synthetic rubbers.	2B350.i.
II.A2.011	"Centrifugal separators", other than those specified in 2B352.c., capable of continuous separation without the propagation of aerosols and manufactured from:a.Alloys with more than 25 % nickel and 20 % chromium by weight;b.Fluoropolymers;c.Glass (including vitrified or enamelled coating or glass lining);d.Nickel or alloys with more than 40 % nickel by weight;e.Tantalum or tantalum alloys;f.Titanium or titanium alloys; org.Zirconium or zirconium alloys.Technical note:"Centrifugal separators" include decanters.	2B352.c.
II.A2.012	Sintered metal filters, other than those specified in 2B352.d., made of nickel or nickel alloy with more than 40 % nickel by weight.	2B352.d.
II.A2.013	Spin-forming machines and flow-forming machines, other than those specified by 2B009, 2B109 or 2B209 and specially designed components therefor.Technical note: For the purpose of this item, machines combining the functions of spin-forming and flow-forming are regarded as flow-forming machines.	2B0092B1092B209
II.A2.014	Equipment and reagents, other than those specified in 2B350 or 2B352, as follows:a.Fermenters capable of cultivation of pathogenic "micro-organisms" or viruses, or capable of toxin production, without the propagation of aerosols, and having a total capacity of 10 l or more;b.Agitators for fermenters as mentioned in a. above;Technical Note: Fermenters include bioreactors, chemostats and continuous-flow systems.c.Laboratory equipment as follows:1.Polymerase chain reaction (PCR)-equipment2.Genetic sequencing equipment;3.Genetic synthesizers;4.Electroporation equipment;5.Specific reagents associated with the equipment in I.A2.014.c. numbers 1. to 4. above;d.Filters, micro-filters, nano-filters or ultra-filters usable in industrial or laboratory biology for continuous filtering, except filters specially designed or modified for medical or clear water production purposes and to be used in the framework of EU or UN officially supported projects;e.Ultracentrifuges, rotors and adaptors for ultracentrifuges;f.Freeze drying equipment.	2B3502B352
II.A2.015	Equipment, other than that specified in 2B005, 2B105 or 3B001.d., for the deposition of metallic overlays as follows, and specially designed components and accessories therefor:a.Chemical vapour deposition (CVD) production equipment;b.Physical vapour deposition (PVD) production equipment;c.Production equipment for deposition by means of inductive or resistance heating.	2B0052B1053B001.d.
II.A2.016	Open tanks or containers, with or without agitators, with a total internal (geometric) volume greater than 0,5 m3 (500 litres), where all surfaces that come in direct contact with the chemical(s) being processed or contained are made from any of the following materials:a.Alloys with more than 25 % nickel and 20 % chromium by weight;b.Fluoropolymers;c.Glass (including vitrified or enamelled coatings or glass lining);d.Nickel or alloys with more than 40 % nickel by weight;e.Tantalum or tantalum alloys;f.Titanium or titanium alloys;g.Zirconium or zirconium alloys;h.Niobium (columbium) or niobium alloys;i.Stainless steel;j.Wood; ork.Rubber.Technical note: The term "rubber" encompasses all kinds of natural and synthetic rubbers.	2B350

II.A3.ELECTRONICS

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
II.A3.001	High voltage direct current power supplies, other than those specified in 0B001.j.5. or 3A227, having both of the following characteristics:a.Capable of continuously producing, over a time period of eight hours, 10 kV or more, with output power of 5 kW or more with or without sweeping; andb.Current or voltage stability better than 0,1 % over a time period of four hours.	0B001.j.5.3A227
II.A3.002	Mass spectrometers, other than those specified in 0B002.g. or 3A233, capable of measuring ions of 200 atomic mass units or more and having a resolution of better than 2 parts in 200, as follows, and ion sources therefor:a.Inductively coupled plasma mass spectrometers (ICP/MS);b.Glow discharge mass spectrometers (GDMS);c.Thermal ionisation mass spectrometers (TIMS);d.Electron bombardment mass spectrometers which have a source chamber constructed from, lined with or plated with "materials resistant to corrosion by uranium hexafluoride UF6";e.Molecular beam mass spectrometers having either of the following characteristics:1.A source chamber constructed from, lined with or plated with stainless steel or molybdenum and equipped with a cold trap capable of cooling to 193 K (– 80 °C) or less; or2.A source chamber constructed from, lined with or plated with materials resistant to UF6;f.Mass spectrometers equipped with a micro-fluorination ion source designed for actinides or actinide fluorides.	0B002.g.3A233
II.A3.003	Frequency changers or generators, other than those specified by 0B001.b.13. or 3A225, having all of the following characteristics, and specially designed components and software therefor:a.Multiphase output capable of providing a power of 40 W or greater;b.Capable of operating in the frequency range between 600 and 2000 Hz; andc.Frequency control better (less) than 0,1 %.Technical notes:1.Frequency changers are also known as converters, inverters, generators, electronic test equipment, AC power supplies, variable speed motor drives or variable frequency drives.2.The functionality specified in this item may be met by certain equipment marketed as: electronic test equipment, AC power supplies, variable speed motor drives or variable frequency drives.	0B001.b.13.3A225
II.A3.004	Spectrometers and diffractometers, designed for the indicative test or quantitative analysis of the elemental composition of metals or alloys without chemical decomposition of the material.	N/A

II.A6.SENSORS AND LASERS

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
II.A6.001	Yttrium aluminium garnet (YAG) rods.	N/A
II.A6.002	Optical equipment and components, other than those specified in 6A002 or 6A004.b. as follows:Infrared optics in the wavelength range 9 μm – 17 μm and components thereof, including cadmium telluride (CdTe) components.	6A0026A004.b.
II.A6.003	Wave front corrector systems, other than mirrors specified in 6A004.a., 6A005.e. or 6A005.f., for use with a laser beam having a diameter exceeding 4 mm, and specially designed components thereof, including control systems, phase front sensors and "deformable mirrors" including bimorph mirrors.	6A004.a.6A005.e.6A005.f.
II.A6.004	Argon ion "lasers", other than those specified in 0B001.g.5., 6A005.a.6. and/or 6A205.a., having an average output power equal to or greater than 5 W.	0B001.g.5.6A005.a.6.6A205.a.
II.A6.005	Semiconductor "lasers", other than those specified in 0B001.g.5., 0B001.h.6. or 6A005.b., and components thereof, as follows:a.Individual semiconductor "lasers" with an output power greater than 200 mW each, in quantities larger than 100;b.Semiconductor "laser" arrays having an output power greater than 20 W.Notes:1.Semiconductor "lasers" are commonly called "laser" diodes.2.This item does not cover "laser" diodes with a wavelength in the range 1,2 μm – 2,0 μm.	0B001.g.5.0B001.h.6.6A005.b.
II.A6.006	Tunable semiconductor "lasers" and tunable semiconductor "laser" arrays, other than those specified in 0B001.h.6. or 6A005.b., of a wavelength between 9 μm and 17 μm, as well as array stacks of semiconductor "lasers" containing at least one tunable semiconductor "laser" array of such wavelength.Note: Semiconductor "lasers" are commonly called "laser" diodes.	0B001.h.6.6A005.b.
II.A6.007	Solid state "tunable" "lasers", other than those specified in 0B001.g.5., 0B001.h.6. or 6A005.c.1., and specially designed components thereof, as follows:a.Titanium-sapphire lasers,b.Alexandrite lasers.	0B001.g.5.0B001.h.6.6A005.c.1.
II.A6.008	Neodymium-doped (other than glass) "lasers", other than those specified in 6A005.c.2.b., having an output wavelength greater than 1,0 μm but not exceeding 1,1 μm and output energy exceeding 10 J per pulse.	6A005.c.2.b.
II.A6.009	Components of acousto-optics, as follows:a.Framing tubes and solid-state imaging devices having a recurrence frequency equal to or exceeding 1 kHz;b.Recurrence frequency supplies;c.Pockels cells.	6A203.b.4.
II.A6.010	Radiation-hardened cameras, or lenses thereof, other than those specified in 6A203.c., specially designed, or rated as radiation-hardened, to withstand a total radiation dose greater than 50 × 103 Gy (silicon) (5 × 106 rad (silicon)) without operational degradation.Technical note: The term Gy (silicon) refers to the energy in Joules per kilogram absorbed by an unshielded silicon sample when exposed to ionising radiation.	6A203.c.
II.A6.011	Tunable pulsed dye laser amplifiers and oscillators, other than those specified in 0B001.g.5., 6A005 and or 6A205.c., having all of the following characteristics:a.Operating at wavelengths between 300 nm and 800 nm;b.An average output power greater than 10 W but not exceeding 30 W;c.A repetition rate greater than 1 kHz; andd.Pulse width less than 100 ns.Note: This item does not cover single mode oscillators.	0B001.g.5.6A0056A205.c.
II.A6.012	Pulsed carbon dioxide "lasers", other than those specified in, 0B001.h.6., 6A005.d. or 6A205.d., having all of the following characteristics:a.Operating at wavelengths between 9 μm and 11 μm;b.A repetition rate greater than 250 Hz;c.An average output power greater than 100 W but not exceeding 500 W; andd.Pulse width less than 200 ns.	0B001.h.6.6A005.d.6A205.d.
II.A6.013	Lasers, other than those specified in 6A005 or 6A205.	6A0056A205

II.A7.NAVIGATION AND AVIONICS

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
II.A7.001	Inertial navigation systems and specially designed components thereof, as follows:a.Inertial navigation systems which are certified for use on "civil aircraft" by civil authorities of a State participating in the Wassenaar Arrangement, and specially designed components thereof, as follows:1.Inertial navigation systems (INS) (gimballed or strapdown) and inertial equipment designed for "aircraft", land vehicle, vessels (surface or underwater) or "spacecraft" for attitude, guidance or control, having any of the following characteristics, and specially designed components thereof:a.Navigation error (free inertial) subsequent to normal alignment of 0,8 nautical mile per hour (nm/hr) "Circular Error Probable" (CEP) or less (better); orb.Specified to function at linear acceleration levels exceeding 10 g;2.Hybrid Inertial Navigation Systems embedded with Global Navigation Satellite Systems(s) (GNSS) or with "Data-Based Referenced Navigation" ("DBRN") System(s) for attitude, guidance or control, subsequent to normal alignment, having an INS navigation position accuracy, after loss of GNSS or "DBRN" for a period of up to four minutes, of less (better) than 10 metres "Circular Error Probable" (CEP);3.Inertial Equipment for Azimuth, Heading, or North Pointing having any of the following characteristics, and specially designed components thereof:a.Designed to have an Azimuth, Heading, or North Pointing accuracy equal to, or less (better) than 6 arc minutes RMS at 45 degrees latitude; orb.Designed to have a non-operating shock level of at least 900 g at a duration of at least 1 msec.b.Theodolite systems incorporating inertial equipment specially designed for civil surveying purposes and designed to have an Azimuth, Heading, or North Pointing accuracy equal to, or less (better) than 6 arc minutes RMS at 45 degrees latitude, and specially designed components thereof.c.Inertial or other equipment using accelerometers specified in 7A001 or 7A101, where such accelerometers are specially designed and developed as MWD (Measurement While Drilling) sensors for use in down-hole well services operations.Note: The parameters of a.1. and a.2. are applicable with any of the following environmental conditions:1.Input random vibration with an overall magnitude of 7,7 g rms in the first half hour and a total test duration of one and a half hours per axis in each of the three perpendicular axes, when the random vibration meets the following:a.A constant power spectral density (PSD) value of 0,04 g2/Hz over a frequency interval of 15 to 1000 Hz; andb.The PSD attenuates with a frequency from 0,04 g2/Hz to 0,01 g2/Hz over a frequency interval from 1000 to 2000 Hz;2.A roll and yaw rate equal to or greater than + 2,62 radian/s (150 deg/s); or3.According to national standards equivalent to 1. or 2. above.Technical notes:1.a.2. refers to systems in which an INS and other independent navigation aids are built into a single unit (embedded) in order to achieve improved performance.2."Circular Error Probable" (CEP) – In a circular normal distribution, the radius of the circle containing 50 % of the individual measurements being made, or the radius of the circle within which there is a 50 % probability of being located.	7A0017A0037A1017A103

II.A9.AEROSPACE AND PROPULSION

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
II.A9.001	Explosive bolts.	N/A
II.A9.002	Internal combustion engines (i.e. axial piston or rotary piston type), designed or modified for propelling "aircrafts" or "lighter-than-air-vehicles" and specially designed components therefor.	N/A
II.A9.003	Trucks, other than those specified in 9A115, having more than one motorised axle and a payload exceeding 5 tonnes.Note: This item includes flatbed trailers, semi trailers and other trailers.	9A115

B.SOFTWARE

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
II.B.001	Software required for the development, production or use of the items in Part A. (Goods).	N/A

C.TECHNOLOGY

No	Description Items, materials, equipment, goods and technology	Related item from Annex I to Regulation (EC) No 428/2009
II.C.001	Technology required for the development, production or use of the items in Part A. (Goods).	N/A

PART IIIOther items, materials, equipment, goods and technology which could contribute to DPRK's ballistic-missile sector.A.GOODSIII.A1.SPECIAL MATERIALS AND RELATED EQUIPMENT

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
III.A1.001	Unwrought aluminium	1C002
III.A1.002	Aluminium waste and scrap	1C002
III.A1.003	Aluminium powders and flakes	1C111
III.A1.004	Aluminium bars, rods and profiles	1C002
III.A1.005	Aluminium wire	1C002
III.A1.006	Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm	1C002
III.A1.007	Aluminium tubes and pipes	1C002
III.A1.008	Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves)	1C002
III.A1.009	Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated	1C002

PART IVWeapons of mass destruction-related items, materials, equipment, goods and technology identified and designated pursuant to paragraph 25 of UN Security Council Resolution 2270 (2016).A.GOODSIV.A0.NUCLEAR MATERIALS, FACILITIES AND EQUIPMENT

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
IV.A0.001	Ring MagnetsPermanent magnet materials having both the following characteristics:i.Ring-shaped magnet with a relation between outer and inner diameter smaller or equal to 1.6:1; andii.Made of any of the following magnetic materials: aluminium-nickel-cobalt, ferrites, samarium-cobalt, or neodymium-iron-boron.	3A201.b.
IV.A0.002	Frequency Changers (also known as converters or inverters)Frequency changers, other than those specified in entries 0B001.b.13 or 3A225 of Annex 1, having all of the following characteristics, and specially designed software therefore:i.Multiphase frequency output;ii.Capable of providing a power of 40 W or greater; andiii.Capable of operating anywhere (at any one point or more) within the frequency range of between 600 and 2000 Hz.Technical Notes:(1)Frequency changers are also known as converters or inverters.(2)The functionality specified above may be met by certain equipment described or marketed as electronic test equipment, AC power supplies, variable speed motor drives, or variable frequency drives.	0B001.b.13.3A225

IV.A1.SPECIAL MATERIALS AND RELATED EQUIPMENT

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
IV.A1.001	Maraging steel having both the following characteristics:i."capable of" an ultimate tensile strength of 1500 MPa or more at 293 K (20 °C).ii.In bar or tube form, with an outer diameter of 75 mm or greater.	1C216
IV.A1.002	Magnetic alloy materials in sheet or thin strip form having both of the following characteristics:(a)Thickness of 0,05 mm or less; or height of 25 mm or less, and(b)Made of any of the following magnetic alloy materials: iron-chromium-cobalt, iron-cobalt-vanadium, iron- chromium-cobalt-vanadium, or iron-chromium.	1C005
IV.A1.003	High-strength Aluminium AlloyAluminium alloys having both the following characteristics:i."capable of" an ultimate tensile of strength of 415 MPa or more at 293 K (20 °C) andii.In bar or tube form, with an outer diameter of 75 mm or greater.Technical Note:The phrase "capable of" encompasses aluminium alloy before or after heat treatment.	1C202
IV.A1.004	"Fibrous or filamentary materials" and prepregs, as follows:i.Carbon, aramid, or glass "fibrous or filamentary materials" having both of the following characteristics:(1)A "specific modulus" exceeding 3,18 × 106 m; and(2)A "specific tensile strength" exceeding 76,2 × 103 m;ii.Prepregs: Thermoset resin-impregnated continuous "yarns", "rovings", "tows" or "tapes" with a width of 30 mm or less, made from carbon, aramid, or glass "fibrous or filamentary materials" controlled in (a) above.	1C210
IV.A1.005	Filament winding machines and related equipment, as follows:i.Filament winding machines having all of the following characteristics:(1)Having motions for positioning, wrapping, and winding fibres coordinated and programmed in two or more axes;(2)Specially designed to fabricate composite structures or laminates from "fibrous or filamentary materials"; and(3)Capable of winding cylindrical tubes of diameter of 75 mm or greater;ii.Coordinating and programming controls for filament winding machines specified in (a) above;iii.Mandrels for filament winding machines specified in (a) above.	1B201
IV.A1.006	Metal hydrides such as, zirconium	1B231
IV.A1.007	Sodium metal (7440-23-5)	1C350
IV.A1.008	Sulphur trioxide (7446-11-9)	1C350
IV.A1.009	Aluminium chloride (7446-70-0)	N/A
IV.A1.010	Potassium Bromide (7758-02-3)	1C350
IV.A1.011	Sodium bromide (7647-15-6)	1C350
IV.A1.012	Dichloromethane (75-09-2)	1C350
IV.A1.013	Isopropyl bromide (75-26-3)	1C350
IV.A1.014	Isopropyl ether (108-20-3)	1C350
IV.A1.015	Monoisopropylamine (75-31-0)	1C350
IV.A1.016	Trimethylamine (75-50-3)	1C350
IV.A1.017	Tributylamine (102-82-9)	1C350
IV.A1.018	Triethylamine (121-44-8)	1C350
IV.A1.019	N,N-Dimethylaniline (121-69-7)	1C350
IV.A1.020	Pyridine (110-86-1)	1C350

IV.A2.MATERIALS PROCESSING

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
IV.A2.001	Flow-forming MachinesAs described in INFCIRC/254/Rev.9/Part2 and S/2014/253	2B209
IV.A2.002	Laser welding equipment	N/A
IV.A2.003	4- and 5-axis CNC machine tools	2B201
IV.A2.004	Plasma cutting equipment	N/A
IV.A2.005	Reaction vessels, reactors, agitators, heat exchangers, condensers, pumps, valves, storage tanks, containers, receivers, and distillation or absorption columns that meet performance parameters described in S/2006/853 and S/2006/853/corr.1Single-seal pumps with manufacturer's specified maximum flow-rate greater than 0,6 m3/h and casings (pump bodies), preformed casing liners, impellers, rotors or jet pump nozzles designed for such pumps, in which all surfaces that come into direct contact with the chemical(s) being processed are made from any of the following materials:(a)nickel or alloys with more than 40 % nickel by weight;(b)alloys with more than 25 % nickel and 20 % chromium by weight;(c)fluoropolymers (polymeric or elastomeric materials with more than 35 % fluorine by weight);(d)glass or glass-lined (including vitrified or enamelled coating);(e)graphite or carbon-graphite;(f)tantalum or tantalum alloys;(g)titanium or titanium alloys;(h)zirconium or zirconium alloys;(i)ceramics;(j)ferrosilicon (high silicon iron alloys); or(k)niobium (columbium) or niobium alloys.	2B350
IV.A2.006	Conventional or turbulent air-flow clean-air rooms and self-contained fan-HEPA filter units that could be used for P3 or P4 (BSL 3, BSL 4, L3, L4) containment facilities.	2B352

PART VWeapons of mass destruction-related items, materials, equipment, goods and technology identified and designated pursuant to paragraph 4 of UN Security Council Resolution 2321 (2016).A.GOODSV.A1.SPECIAL MATERIALS AND RELATED EQUIPMENT

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
V.A1.001	Isocyanates (TDI (Toluene di-isocyanate), MDI (Methylene bis (phenyl isocyanate)), IPDI (Isophorone diiosocyanate), HNMDI or HDI (Hexamethylene diisocyanate), and DDI (dimeryl diisocyanate) and production equipment.	N/A
V.A1.002	Ammonium nitrate, chemically pure or in phase stabilized version (PSAN).	1C111
V.A1.003	Polymeric Substances (Hydroxyl Terminated Poly-Ether (HTPE), Hydroxyl Terminated Caprolactone Ether (HTCE), Polypropylene glycol (PPG), Polydiethyleneglycol adipate (PGA) and Polyethylene	1C111
V.A1.004	Manganese metal Brazing Foils.	1C111

V.A2.MATERIALS PROCESSING

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
V.A2.001	Hydroforming machines.	2B109
V.A2.002	Thermal treatment furnaces — Temperature > 850 °C and one dimension > 1 m,	II.A2.0052B2262B227
V.A2.003	Electrical Discharge Machines (EDMs)	2B001.d
V.A2.004	Friction stir welding machines.	N/A
V.A2.005	Floor-mounted fume hoods (walk-in style) with a minimum nominal width of 2,5 meters,	2B352
V.A2.006	Batch centrifuges with a rotor capacity of 4 L or greater, usable with biological materials	II.A2.014.e.2B3502B352
V.A2.007	Fermenters with an internal volume of 10-20 L (0,01-0,02 m3), usable with biological materials	2B352II.A2.014.a.

V.A6.SENSORS AND LASERS

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
V.A6.001	High-speed imaging cameras except those used in medical imaging systems	6A003.a.2

V.A9.AEROSPACE AND PROPULSION

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
V.A9.001	Non-destructive test chambers with a 1m or more critical internal dimension.	9B106
V.A9.002	Turbo-pumps for liquid or hybrid rocket engines	9A006
V.A9.003	Countermeasure Subsystems and Penetration Aids (e.g. jammers, chaff, decoys) designed to saturate, confuse, or evade missile defences.	N/A
V.A9.004	Truck chassis with 6 or more axles	9A115II.A9.003

B.SOFTWARE

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
V.B.001	Modelling and design software related to the modelling of aerodynamic and thermodynamic analysis of rocket or unmanned aerial vehicle systems.	N/A

PART VIWeapons of mass destruction-related items, materials, equipment, goods and technology identified and designated pursuant to paragraph 4 of UNSCR 2371 (2017).A.GOODSVI.A1.SPECIAL MATERIALS AND RELATED EQUIPMENT

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
VI.A1.001	Explosive bolts, nuts and shackles, flexible linear-shaped charges, ball locks, compression springs, circular cutting devices and acceleration rockets usable for staging mechanisms	N/A
VI.A1.002	All environmental test chambers capable of simulating flight conditions (temperature, pressure, shock and vibration) except those used for civilian aircraft safety purposes	9B106
VI.A1.003	Rapid prototyping, including additive manufacturing equipment	N/A
VI.A1.004	Polyacrylonitrile (PAN) fibre usable as a precursor for carbon fibre production and its associated production equipment	1C0101C2109C110
VI.A1.005	For point 12 of the list in the report of the Committee prepared in accordance with paragraph 25 of resolution 2270 (2016) (S/2016/308, annex) read "Metal hydrides, such as zirconium hydride, beryllium hydride, aluminium hydride, lithium aluminium hydride and titanium hydride"	1C111
VI.A1.006	Plasticizers usable in composite propellants, such asdioctyl adipate (DOA) (CAS 123-79-5)dioctyl sebacate (DOS) (CAS 122-62-3)dioctyl azelate (DOZ) (CAS 103-24-2)	1C111
VI.A1.007	Maraging steel capable of an ultimate tensile strength of 1950 MPa or more at 293 K (20 °C) and in any of the following forms:(a)Sheet, plate or tubing with a wall or plate thickness equal to or less than 5,0 mm;(b)Tubular forms with a wall thickness of 50 mm or less and having an inner diameter of 270 mm or more	1C216
VI.A1.008	Filament winding machines and related equipment:Filament winding machines or fibre/tow-placement machines, of which the motions for positioning, wrapping and winding fibres can be coordinated and programmed in two or more axes and which are designed to fabricate composite structures or laminates from fibrous or filamentary materials, coordinating and programming controls and precision mandrels for such equipment	1B0011B1011B201
VI.A1.009	Full face-mask air-purifying and air-supplying respirators except those used in breathing apparatus for firefighters	1A004.a.2B352
VI.A1.010	Additional chemicals suitable for decontamination of chemical warfare agents:Diethylenetriamine (CAS 111-40-0)	N/A
VI.A1.011	Nerve agent chemoprophylaxis:Butyrylcholinesterase (BCHE)Pyridostigmine bromide (CAS 101-26-8)Obidoxime chloride (CAS 114-90-9)	N/A

PART VIIConventional arms-related items, materials, equipment, goods and technology designated, pursuant to paragraph 5 of UNSCR 2371 (2017).A.GOODSVII.A1.SPECIAL MATERIALS AND RELATED EQUIPMENT

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
VII.A1.001	"Composite" structures or laminates consisting of an organic "matrix" and materials as follows:Note:Does not apply to "composite" structures or laminates, made from epoxy resin impregnated carbon "fibrous or filamentary materials", for the repair of "civil aircraft" structures or laminates, having all of the following:An area not exceeding 1 m2;A length not exceeding 2,5 m;A width exceeding 15 mm.Does not apply to semi-finished items, specially designed for purely civilian applications as follows: sporting goods, automotive industry, machine tool industry, medical applications. Does not apply to finished items specially designed for a specific application.(a)Inorganic "fibrous or filamentary materials" that have a "specific modulus" exceeding 2,54 × 106 m and a melting, softening, decomposition or sublimation point exceeding 1649 °C in an inert environment.Note: Does not apply to the followingDiscontinuous, multiphase, polycrystalline alumina fibres in chopped fibre or random mat form containing 3 % by weight or more silica with a "specific modulus" of less than 10 × 106 mMolybdenum and molybdenum alloy fibresBoron fibresDiscontinuous ceramic fibres with a melting, softening, decomposition or sublimation point lower than 1770 °C in an inert environment.(b)"Fibrous or filamentary materials" having any of the following:1.Materials composed of aromatic polyetherimides having a glass transition temperature (Tg) exceeding 290 °C,2.Polyarylene ketones,3.Polyarylene sulphides where the arlylene group is biphenylene, triphenylene or combinations thereof,4.Polybiphenylenethersulphone having a Tg exceeding 290 °C, or5.Any of the above materials "commingled" with any of the following:a.Organic "fibrous or filamentary materials", with a "specific modulus" exceeding 12,7 × 106 m and a "specific tensile strength" exceeding 23,5 × 104 m.b.Carbon "fibrous or filamentary materials", having a "specific modulus" exceeding 14,65 × 106 m; and specific tensile strength exceeding 26,82 × 104 m.c.Inorganic "fibrous or filamentary materials", having a "specific modulus" exceeding 2,54 × 106 m; and a melting, softening, decomposition or sublimation point exceeding 1649 °C in an inert environment.Notes:1.Does not apply to polyethylene.2.Does not apply to"fibrous or filamentary materials", for the repair of civil aircraft structures or laminates, having an area not exceeding 1 m2; a length not exceeding 2,5 m; and a width exceeding 15 mm.Mechanically chopped, milled or cut carbon "fibrous or filamentary materials" 25,0 mm or less in length.3.Does not apply to discontinuous, multiphase, polycrystalline alumina fibres in chopped fibre or random mat form, containing 3 % by weight or more silica, with a "specific modulus" of less than 10 × 106 m; molybdenum and molybdenum alloy fibres; boron fibres; discontinuous ceramic fibres with a melting, softening, decomposition or sublimation point lower than 1770 °C in an inert environment.(c)Organic "fibrous or filamentary materials" with a "specific modulus" exceeding 12,7 × 106 m and with a "specific tensile strength" exceeding 23,5 × 104 m.(d)Carbon "fibrous or filamentary materials" having a "specific modulus" exceeding 14,65 × 106 m and a specific tensile exceeding 26,82 × 104 m.(e)Fully or partially resin-impregnated or pitch-impregnated "fibrous or filamentary materials" (prepregs), metal or carbon-coated "fibrous or filamentary materials" (preforms) or carbon fibre preforms having any of the following "fibrous or filamentary materials" and resins:1.Inorganic "fibrous or filamentary materials" with a "specific modulus" exceeding 2,54 × 106 m and a melting, softening, decomposition or sublimation point exceeding 1649 °C in an inert environment, or2.Organic or carbon "fibrous or filamentary materials", having all of the following:a."Specific modulus" exceeding 10,15 × 106 m; andb."Specific tensile strength" exceeding 17,7 × 104 m; or3.Resin or pitch, from unprocessed fluorinated compounds such as:a.Fluorinated polyimides containing 10 % by weight or more of combined fluorine;b.Fluorinated phosphazene elastomers containing 30 % by weight or more of combined fluorine; or4.Phenolic resins with Dynamic Mechanical Analysis glass transition temperature (DMA Tg) equal to, or exceeding, 180 °C and having a phenolic resin; or5.Other resin or pitch with Dynamic Mechanical Analysis glass transition temperature (DMA Tg) equal to, or exceeding, 232 °C.Note:Does not apply toEpoxy resin "matrix" impregnated carbon "fibrous or filamentary materials" (prepregs) for the repair of "civil aircraft" structures or laminates, having all of the following;An area not exceeding 1 m2;A length not exceeding 2,5 m; andA width exceeding 15 mm	1A0021A202
VII.A1.002	"Fibrous or filamentary materials" having any of the following:(a)Materials composed of aromatic polyetherimides having a glass transition temperature (Tg) exceeding 290 °C.(b)Polyarylene ketones.(c)Polyarylene sulphides where the arlylene group is biphenylene, triphenylene or combinations thereof(d)Polybiphenylenethersulphone having a Tg exceeding 290 °C, or(e)Any of the above materials commingled with any of the following:1.Organic "fibrous or filamentary materials", with a "specific modulus" exceeding 12,7 × 106 m and "specific tensile strength" exceeding 23,5 × 104 m,2.Carbon "fibrous or filamentary materials", having a "specific modulus" exceeding 14,65 × 106 m and "specific tensile strength" exceeding 26,82 × 104 m,3.Inorganic "fibrous or filamentary materials", having a "specific modulus" exceeding 2,54 × 106 m and melting, softening, decomposition or sublimation point exceeding 1649 °C in an inert environment.Notes:1.Does not apply to polyethylene.2.Does not apply to:"fibrous or filamentary materials", for the repair of civil aircraft structures or laminates, having an area not exceeding 1 m2; a length not exceeding 2,5 m; and a width exceeding 15 mm.Mechanically chopped, milled or cut carbon "fibrous or filamentary materials" 25,0 mm or less in length.3.Does not apply to discontinuous, multiphase, polycrystalline alumina fibres in chopped fibre or random mat form, containing 3 % by weight or more silica, with a "specific modulus" of less than 10 × 106 m; molybdenum and molybdenum alloy fibres; boron fibres; discontinuous ceramic fibres with a melting, softening, decomposition or sublimation point lower than 1770 °C in an inert environment	1C0081C0101C2109C110
VII.A1.003	Equipment for the "production" or inspection of "composite" structuresSpecially designed components and accessories to include:(a)Filament winding machines, of which the motions for positioning, wrapping and winding fibres are coordinated and programmed in three or more "primary servo positioning" axes, specially designed for the manufacture of "composite" structures or laminates, from "fibrous or filamentary materials".(b)"Tape-laying machines", of which the motions for positioning and laying tape are coordinated and programmed in five or more "primary servo positioning" axes, specially designed for the manufacture of "composite" airframe or missile structures.(c)Multidirectional, multidimensional weaving machines or interlacing machines, including adapters and modification kits, specially designed or modified for weaving, interlacing or braiding fibres for "composite" structures.(d)Equipment specially designed or adapted for the "production" of reinforcement fibres, as follows:1.Equipment for converting polymeric fibres (such as polyacrylonitrile, rayon, pitch or polycarbosilane) into carbon fibres or silicon carbide fibres, including special equipment to strain the fibre during heating;2.Equipment for the chemical vapor deposition of elements or compounds, on heated filamentary substrates, to manufacture silicon carbide fibres;3.Equipment for the wet-spinning of refractory ceramics (such as aluminium oxide);4.Equipment for converting aluminium containing precursor fibres into alumina fibres by heat treatment;5.Equipment for producing prepregs specified in VII.A1.003, paragraph "d", under "Materials", by the hot melt method;6.Non-destructive inspection equipment specially designed for "composite" materials, as follows:a.X-ray tomography systems for three dimensional defect inspection;b.Numerically controlled ultrasonic testing machines of which the motions for positioning transmitters or receivers are simultaneously coordinated and programmed in four or more axes to follow the three dimensional contours of the component under inspection.Notes:1.For the purposes of this "tape-laying machines" have the ability to lay one or more "filament bands" limited to widths greater than 25 mm and less than or equal to 305 mm, and to cut and restart individual "filament band" courses during the laying process.2.The technique of interlacing includes knitting.	1B001.a.1B001.b.1B001.c.1B001.d.1B001.e.1B0011B1011B201
VII.A1.004	Metal alloys, metal alloy powder and alloyed materials including the following:(a)Aluminides, including:1.Nickel aluminides containing a minimum of 15 % by weight aluminium, a maximum of 38 % by weight aluminium and at least one additional alloying element;2.Titanium aluminides containing 10 % by weight or more aluminium and at least one additional alloying element.(b)Metal alloys made from the powder or particulate material including:1.Nickel alloys having a stress-rupture life of 10000 hours or longer at 650 °C at a stress of 676 MPa or a low cycle fatigue life of 10000 cycles or more at 550 °C at a maximum stress of 1095 MPa;2.Niobium alloys having a stress-rupture life of 10000 hours or longer at 800 °C at a stress of 400 MPa or a low cycle fatigue life of 10000 cycles or more at 700 °C at a maximum stress of 700 MPa;3.Titanium alloys having a stress-rupture life' of 10000 hours or longer at 450 °C at a stress of 200 MPa or a low cycle fatigue life of 10000 cycles or more at 450 °C at a maximum stress of 400 MPa;4.Aluminium alloys having a tensile strength of 240 MPa or more at 200 °C or a tensile strength of 415 MPa or more at 25 °C;5.Magnesium alloys having a tensile strength of 345 MPa or more and a corrosion rate of less than 1 mm/year in 3 % sodium chloride aqueous solution measured in accordance with ASTM standard G-31 or national equivalents;6.Metal alloy powder or particulate material, having all of the following and made from any of the following composition systems:a.Nickel alloys (Ni-Al-X, Ni-X-Al) qualified for turbine engine parts or components, i.e. with less than 3 non-metallic particles (introduced during the manufacturing process) larger than 100 μm in 109 alloy particlesb.Niobium alloys (Nb-Al-X or Nb-X-Al, Nb-Si-X or Nb-X-Si, Nb Ti X or Nb-X-Ti)c.Titanium alloys (Ti-Al-X or Ti-X-Al)d.Aluminium alloys (Al-Mg-X or Al-X-Mg, Al-Zn-X or Al-X-Zn, Al Fe-X or Al-X-Fe) ore.Magnesium alloys (Mg-Al-X or Mg-X-Al)7.Made in a controlled environment by any of the following processes:a."Vacuum atomization"b."Gas atomization"c."Rotary atomization"d."Splat quenching"e."Melt spinning and comminution"Note:Unless provision to the contrary is made, the words "metals" and "alloys" cover crude and semi-fabricated forms.Crude forms: anodes, balls, bars (including notched bars and wire bars), billets, blocks, blooms, brickets, cakes, cathodes, crystals, cubes, dice, grains, granules, ingots, lumps, pellets, pigs, powder, rondelles, shot, slabs, slugs, sponge, sticks. Semi-fabricated forms: Wrought or worked materials fabricated by rolling, drawing, extruding, forging, impact extruding, pressing, graining, atomising, and grinding, i.e.: angles, channels, circles, discs, dust, flakes, foils and leaf, forging, plate, powder, pressings and stampings, ribbons, rings, rods (including bare welding rods, wire rods, and rolled wire), sections, shapes, sheets, strip, pipe and tubes (including tube rounds, squares, and hollows), drawn or extruded wire. Cast material produced by casting in sand, die, metal, plaster or other types of moulds, including high pressure castings, sintered forms, and forms made by powder metallurgy.	1C0021C202
VII.A1.005	Magnetic metals, of all types and of whatever form, having any of the following:(a)Initial relative permeability of 120000 or more and a thickness of 0,5 mm or less(b)Magnetostrictive alloys having any of the following:1.A saturation magnetostriction of more than 5 × 10– 4; or2.A magnetomechanical coupling factor (k) of more than 0,8; or(c)Amorphous or "nanocrystalline" alloy strips, having all of the following:1.A composition having a minimum of 75 % by weight of iron, cobalt or nickel;2.A saturation magnetic induction (Bs) of 1,6 T or more; and any of the following:a.A strip thickness of 0,02 mm or less; orb.An electrical resistivity of 2 × 10– 4 ohm cm or more.	1C003
VII.A1.006	Uranium titanium alloys or tungsten alloys with a "matrix" based on iron, nickel or copper, having all of the following:(a)A density exceeding 17,5 g/cm3;(b)An elastic limit exceeding 880 MPa;(c)An ultimate tensile strength exceeding 1270 MPa; and(d)An elongation exceeding 8 %.	1C004
VII.A1.007	"Superconductive" composite conductors in lengths exceeding 100 m or with a mass exceeding 100 g, as follows:(a)"Superconductive" "composite" conductors containing one or more niobium-titanium "filaments", having all of the following:1.Embedded in a "matrix" other than a copper or copper-based mixed "matrix"; and2.Having a cross-section area less than 0,28x 10– 4 mm2 (6 μm in diameter for circular "filaments");(b)"Superconductive" "composite" conductors consisting of one or more "superconductive" "filaments" other than niobium-titanium, having all of the following:1.A "critical temperature" at zero magnetic induction exceeding – 263,31 °C; and2.Remaining in the "superconductive" state at a temperature of – 268,96 °C when exposed to a magnetic field oriented in any direction perpendicular to the longitudinal axis of conductor and corresponding to a magnetic induction of 12 T with critical current density exceeding 1750 A/mm2 on overall cross-section of the conductor.(c)"Superconductive" "composite" conductors consisting of one or more "superconductive" "filaments", which remain "superconductive" above – 158,16 °C	1C005
VII.A1.008	Fluids and lubricating materials, as follows:(a)Lubricating materials containing, as their principal ingredients, any of the following:1.Phenylene or alkylphenylene ethers or thio-ethers, or their mixtures, containing more than two ether or thio-ether functions or mixtures thereof; or2.Fluorinated silicone fluids with a kinematic viscosity of less than 5000 mm2/s (5000 centistokes) measured at 25 °C;(b)Damping or flotation fluids having all of the following:1.Purity exceeding 99,8 %;2.Containing less than 25 particles of 200 μm or larger in size per3.100 ml; and4.Made from at least 85 % of any of the following:a.Dibromotetrafluoroethane (CAS 25497-30-7, 124-73-2, 27336-23-8);b.Polychlorotrifluoroethylene (oily and waxy modifications only); orc.Polybromotrifluoroethylene(c)Fluorocarbon electronic cooling fluids having all of the following:1.Containing 85 % by weight or more of any of the following, or mixtures thereof:a.Monomeric forms of perfluoropolyalkylether-triazines or perfluoroaliphatic-ethers;b.Perfluoroalkylamines;c.Perfluorocycloalkanes; ord.Perfluoroalkanese.Density at 298 K (25 °C) of 1,5 g/ml or more;f.In a liquid state at 273 K (0 °C); andg.Containing 60 % or more by weight of fluorineNote: Does not apply to materials specified and packages as medical products	1C006
VII.A1.009	Ceramic powders, non-"composite" ceramic materials, ceramic-"matrix" "composite" materials and precursor materials, as follows:(a)Ceramic powders of single or complex borides of titanium, having total metallic impurities, excluding intentional additions, of less than 5000 ppm, an average particle size equal to or less than 5 μm and no more than 10 % of the particles larger than 10 μm;(b)Non-"composite" ceramic materials in crude or semi-fabricated form, composed of borides of titanium with a density of 98 % or more of the theoretical density;(c)Ceramic-ceramic "composite" materials with a glass or oxide-"matrix" and reinforced with fibres having all of the following:1.Made from any of the following materials:a.Si-N;b.Si-C;c.Si-A1-O-N; ord.Si-O-N; and2.Having a "specific tensile strength" exceeding 12,7 × 103 m(d)Ceramic-ceramic "composite" materials, with or without a continuous metallic phase, incorporating particles, whiskers or fibres, where carbides or nitrides of silicon, zirconium or boron form the "matrix";(e)Precursor materials (i.e., special purpose polymeric or metallo-organic materials) for producing any phase or phases of the materials specified above, as follows:1.Polydiorganosilanes (for producing silicon carbide);2.Polysilazanes (for producing silicon nitride);3.Polycarbosilazanes (for producing ceramics with silicon, carbon and nitrogen components);(f)Ceramic-ceramic "composite" materials with an oxide or glass "matrix" reinforced with continuous fibres from any of the following systems:1.Al2O3 (CAS 1344-28-1); or2.Si-C-N.Notes:1.Does not apply to abrasives.2.Does not apply to "composites" containing fibres from these systems with a fibre "tensile strength" of less than 700 MPa at 1273 K (1000 °C) or fibre tensile creep resistance of more than 1 per cent creep strain at 100 MPa load and 1273 K (1000 °C) for 100 hours.	1C007
VII.A1.010	Non-fluorinated polymeric substances as follows:(a)Imides as follows:1.Bismaleimides;2.Aromatic polyamide-imides (PAI) having a "glass transition temperature (Tg)" exceeding 290 °C;3.Aromatic polyimides having a "glass transition temperature (Tg)" exceeding 232 °C;4.Aromatic polyetherimides having a "glass transition temperature (Tg)" exceeding 290°C;(b)Polyarylene ketones;(c)Polyarylene sulphides, where the arylene group is biphenylene, triphenylene or combinations thereof;(d)Polybiphenylenethersulphone having a "glass transition temperature (Tg)" exceeding 290°C.Note: Applies to the substances in liquid or solid "fusible" form, including resin, powder, pellet, film, sheet, tape, or ribbon.	1C008
VII.A1.011	Unprocessed fluorinated compounds as follows:(a)Fluorinated polyimides containing 10 % by weight or more of combined fluorine;(b)Fluorinated phosphazene elastomers containing 30 % by weight or more of combined fluorine.	1C009
VII.A1.012	"Fibrous or filamentary materials" as follows:(a)Organic "fibrous or filamentary materials", having all of the following:1."specific modulus" exceeding 12,7 × 106 m; and2."specific tensile strength" exceeding 23,5 × 104 m;(b)Carbon "fibrous or filamentary materials", having all of the following:1."specific modulus" exceeding 14,65 × 106 m; and2."specific tensile strength" exceeding 26,82 × 104 m;(c)Inorganic "fibrous or filamentary materials", having all of the following:1."Specific modulus" exceeding 2,54 × 106 m; and2.Melting, softening, decomposition or sublimation point exceeding 1649 °C in an inert environment(d)"Fibrous or filamentary materials", having any of the following:1.Composed of any of the following:a.Polyetherimides specified in VII.A1.010b.Other materials specified in VII.A1.0102.Composed of materials specified above and commingled with other fibres specified in VII.A1.012.(e)Fully or partially resin-impregnated or pitch-impregnated fibrous or filamentary materials (prepregs), metal or carbon-coated "fibrous or filamentary materials" (preforms) or carbon fibre preforms, having all of the following:1.Having any of the following:a.Inorganic "fibrous or filamentary materials" specified aboveb.Organic or carbon "fibrous or filamentary materials", having all of the following:1."Specific modulus" exceeding 10,15 × 106 m; and2."Specific tensile strength" exceeding 17,7 × 104 m; and2.Having any of the following:a.Resin or pitch, specified in previous sections;b."Dynamic Mechanical Analysis glass transition temperature (DMA Tg)" equal to or exceeding 180 °C and having a phenolic resin; orc."Dynamic Mechanical Analysis glass transition temperature (DMA Tg)" equal to or exceeding 232 °C and having a resin or pitch, not specified earlier and not being a phenolic resin.Notes:1.Does not apply to polyethylene.2.Does not apply to "fibrous or filamentary materials", for the repair of "civil aircraft" structures or laminates, having all of the following:(a)An area not exceeding 1 m2;(b)A length not exceeding 2,5 m; and(c)A width exceeding 15 mm. Or to mechanically chopped, milled or cut carbon "fibrous or filamentary materials" 25,0 mm or less in length.3.Does not apply to the following:(a)Discontinuous, multiphase, polycrystalline alumina fibres in chopped fibre or random mat form, containing 3 % by weight or more silica, with a "specific modulus" of less than 10 × 106 m;(b)Molybdenum and molybdenum alloy fibres;(c)Boron fibres;(d)Discontinuous ceramic fibres with a melting, softening, decomposition or sublimation point lower than 2043 K (1770 °C) in an inert environment.4.Does not apply to:(a)Epoxy resin "matrix" impregnated carbon "fibrous or filamentary materials" (prepregs) for the repair of "civil aircraft" structures or laminates, having all of the following;1.An area not exceeding 1 m2;2.A length not exceeding 2,5 m; and3.A width exceeding 15 mm.(b)Fully or partially resin-impregnated or pitch-impregnated mechanically chopped, milled or cut carbon "fibrous or filamentary materials" 25,0 mm or less in length when using a resin or pitch other than those specified previously.	1C010.a.1C010.b.1C010.c.
VII.A1.013	Metals and compounds, as follows:(a)Metals in particle sizes of less than 60 μm whether spherical, atomized, spheroidal, flaked or ground, manufactured from material consisting of 99 % or more of zirconium, magnesium and alloys thereof;(b)Boron or boron alloys, with a particle size of 60 μm or less, as follows:1.Boron with a purity of 85 % by weight or more;2.Boron alloys with a boron content of 85 % by weight or more;(c)Guanidine nitrate (CAS 506-93-4);(d)Nitroguanidine (NQ) (CAS 556-88-7)Note: The metals referred to here also refer to metals or alloys encapsulated in aluminium, magnesium, zirconium or beryllium.	1C011
VII.A1.014	Body armour and components therefor, as follows:(a)Soft body armour not manufactured to military standards or specifications, or to their equivalents, and specially designed components therefor;(b)Hard body armour plates providing ballistic protection equal to or less than level IIIA (NIJ 0101.06, July 2008) or national equivalents.Note: this paragraph does not apply to body armour when accompanying its user for the user's own personal protection, to body armour designed to provide frontal protection only from both fragment and blast from non-military explosive devices, and to body armour designed to provide protection only from knife, spike, needle or blunt trauma.	1A005

VII.A4.COMPUTERS

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
VII.A4.001	Electronic computers and related systems, equipment and components, or "electronic assemblies" having any of the following:(a)Specially designed to have any of the following:1.Radiation hardened to exceed any of the following specifications:a.Total dose 5 × 103 Gy (Si);b.Dose rate upset 5 × 106 Gy (Si)/s; orc.Single event upset 1 × 10– 8 error/bit/day.	4A001

VII.A5.TELECOMUNICATIONS AND "INFORMATION SECURITY"

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
VII.A5.001	Telecommunication systems and equipment, and specially designed components and accessories therefor, having any of the following characteristics, functions or features:(a)Specially designed to have any of the following:1.User programmable spreading codes; or2.A total transmitted bandwidth which is 100 or more times the bandwidth of any one information channel and in excess of 50 kHz.Note: Does not apply to radio equipment specially designed for use with any of the following:(a)Civil cellular radio-communications systems; or(b)Fixed or mobile satellite earth stations for commercial civil telecommunications.(b)Being digitally controlled radio receivers having all of the following:1.More than 1000 channels;2.A "channel switching time" of less than 1 ms;3.Automatic searching or scanning of a part of the electromagnetic spectrum; and4.Identification of the received signals or the type of transmitter.Note: Does not apply to radio equipment specially designed for use with civil cellular radio-communications systems.Technical note:"Channel switching time": the time (i.e., delay) to change from one receiving frequency to another, to arrive at or within ± 0,05 % of the final specified receiving frequency. Items having a specified frequency range of less than ± 0,05 % around their centre frequency are defined to be incapable of channel frequency switching.	5A001.b.
VII.A5.002	Telecommunication test, inspection and production equipment and specially designed components or accessories therefor, specially designed for the "development" or "production" of telecommunication equipment, functions or features.Note: Does not apply to optical fibre characterization equipment.	5B002

VII.A6SENSORS AND LASERS

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
VII.A6.001	Hydrophones having any of the following:(a)Incorporating continuous flexible sensing elements(b)Incorporating flexible assemblies of discrete sensing elements with either a diameter or length less than 20 mm and with a separation between elements of less than 20 mm;(c)Having any of the following sensing elements:1.Optical fibres;2."Piezoelectric polymer" films other than polyvinylidene-fluoride (PVDF) and its co-polymers {P(VDF-TrFE) and P(VDF-TFE)};3."Flexible piezoelectric composites"4.Lead-magnesium-niobate/lead-titanate (i.e., Pb(Mg 1/3 Nb 2/3)O3-PbTiO3, or PMN-PT) piezoelectric single crystals grown from solid solution; or5.Lead-indium-niobate/lead-magnesium niobate/lead-titanate (i.e., Pb(In1/2 Nb1/2)O3–Pb(Mg1/3 Nb2/3)O3–PbTiO3, or PIN-PMN-PT) piezoelectric single crystals grown from solid solution;(d)Designed to operate at depths exceeding 35 m with acceleration compensation; or(e)Designed for operation at depths exceeding 1000 m.Note: The status of hydrophones specially designed for other equipment is determined by the status of the other equipment.	6A001.a.
VII.A6.002	Towed acoustic hydrophone arrays having any of the following:(a)Hydrophone group spacing of less than 12,5 m or "able to be modified" to have hydrophone group spacing of less than 12,5 m;(b)Designed or "able to be modified" to operate at depths exceeding 35 m;(c)Heading sensors specified in VII.A6.003(d)Longitudinally reinforced array hoses;(e)An assembled array of less than 40 mm in diameter;(f)Hydrophone characteristics specified in (a) above or a hydrophone with a hydrophone sensitivity better than 180 dB at any depth with no acceleration, or(g)Accelerometer-based hydro-acoustic with the following:1.Composed of three accelerometers arranged along three distinct axes;2.Having an overall "acceleration sensitivity" better than 48 dB (reference 1000 mV rms per 1g);3.Designed to operate at depths greater than 35 metres; and4.Operating frequency below 20 kHz.	6A001.a.
VII.A6.003	Heading sensors having all of the following:(a)An "accuracy" of better than 0,5°; and(b)Designed to operate at depths exceeding 35 m or having an adjustable or removable depth sensing device in order to operate at depths exceeding 35 m;	6A001.a.
VII.A6.004	Bottom or bay-cable hydrophone arrays having any of the following:(a)Incorporating hydrophones specified in VII.A6.002 or a hydrophone with a hydrophone sensitivity better than 180 dB at any depth with no acceleration.(b)Incorporating multiplexed hydrophone group signal modules having all of the following characteristics:1.Designed to operate at depths exceeding 35 m or having an adjustable or removable depth sensing device in order to operate at depths exceeding 35 m; and2.Capable of being operationally interchanged with towed acoustic hydrophone array modules; or(c)Incorporating accelerometer based hydro-acoustic sensors.Technical note:Accelerometer-based hydro-acoustic sensors having all of the following:1.Composed of three accelerometers arranged along three distinct axes;2.Having an overall "acceleration sensitivity" better than 48 dB (reference 1000 mV rms per 1g);3.Designed to operate at depths greater than 35 metres; and4.Operating frequency below 20 kHz.Notes:1.Does not apply to particle velocity sensors or geophones.2.Also applies to receiving equipment, whether or not related in normal application to separate active equipment, and specially designed components therefor.	6A001.a.
VII.A6.005	"Monospectral imaging sensors" and "multispectral imaging sensors", designed for remote sensing applications and having any of the following:(a)An Instantaneous-Field-Of-View (IFOV) of less than 200 μrad (microradians); or(b)Specified for operation in the wavelength range exceeding 400 nm but not exceeding 30000 nm and having all the following;1.Providing output imaging data in digital format; and2.Having any of the following characteristics:a."Space-qualified"; orb.Designed for airborne operation, using other than silicon detectors, and having an IFOV of less than 2,5 mrad (milliradians);Note: Does not apply to monospectral imaging sensors' with a peak response in the wavelength range exceeding 300 nm but not exceeding 900 nm and only incorporating any of the following non "space-qualified" detectors or non-"space-qualified" "focal plane arrays":(a)Charge Coupled Devices not designed or modified to achieve "charge multiplication"; or(b)Complementary Metal Oxide Semiconductor devices not designed or modified to achieve "charge multiplication".	6A002
VII.A6.006	"Space-qualified" components for optical systems, as follows:(a)Components lightweighted to less than 20 % "equivalent density" compared with a solid blank of the same aperture and thickness;(b)Raw substrates, processed substrates having surface coatings (single-layer or multi-layer, metallic or dielectric, conducting, semiconducting or insulating) or having protective films;(c)Segments or assemblies of mirrors designed to be assembled in space into an optical system with a collecting aperture equivalent to or larger than a single optic 1 m in diameter;(d)Components manufactured from "composite" materials having a coefficient of linear thermal expansion equal to or less than 5 × 10– 6 in any coordinate direction;	6A004.a.
VII.A6.007	Optical control equipment as follows:(a)Equipment specially designed to maintain the surface figure or orientation of the "space-qualified" components specified above.(b)Steering, tracking, stabilization and resonator alignment equipment as follows:1.Beam steering mirror stages designed to carry mirrors having diameter or major axis length greater than 50 mm and having all of the following, and specially designed electronic control equipment therefor:a.A maximum angular travel of ±26 mrad or more;b.A mechanical resonant frequency of 500 Hz or more; andc.An angular "accuracy" of 10 μrad (microradians) or less (better);2.Resonator alignment equipment having bandwidths equal to or more than 100 Hz and an accuracy of 10 μrad or less (better);(c)Gimbals having all of the following:1.A maximum slew exceeding 5°;2.A bandwidth of 100 Hz or more;3.Angular pointing errors of 200 μrad (microradians) or less; and4.Having any of the following:a.Exceeding 0,15 m but not exceeding 1 m in diameter or major axis length and capable of angular accelerations exceeding 2 rad (radians)/s2; orb.Exceeding 1 m in diameter or major axis length and capable of angular accelerations exceeding 0,5 rad (radians)/s2.	6A004.d.
VII.A6.008	"Magnetometers" using superconductive technology (SQUID) and having any of the following:(a)SQUID systems designed for stationary operation, without specially designed subsystems designed to reduce in-motion noise, and having a "sensitivity" equal to or lower (better) than 50 fT (rms) per square root Hz at a frequency of 1 Hz; or(b)SQUID systems having an in-motion-magnetometer "sensitivity" lower (better) than 2 pT (rms) per square root Hz at a frequency of 1 Hz and specially designed to reduce in-	6A006Except:6A006.a.3 "Magnetometers" using fluxgate "technology"6A006.a.4 Induction coil "magnetometers"6A006.b. Underwater electric field sensors
VII.A6.009	"Magnetometers" using optically pumped or nuclear precession (proton/Overhauser) "technology" having a "sensitivity" lower (better) than 2 pT (rms) per square root Hz at a frequency of 1 Hz;	6A006
VII.A6.010	"Magnetic gradiometers" using multiple "magnetometers" specified in VII.A6;	6A006
VII.A6.011	"Compensation systems" for the following:(a)"Magnetometers" using optically pumped or nuclear precession (proton/ Overhauser) "technology" having a "sensitivity" lower (better) than 20 pT (rms) per square root Hz at a frequency of 1 Hz, and using optically pumped or nuclear precession (proton/Overhauser) "technology" that will permit these sensors to realize a "sensitivity" lower (better) than 2 pT rms per square root Hz.(b)Underwater electric field sensors having a "sensitivity" lower (better) than 8 nanovolt per meter per square root Hz when measured at 1 Hz.(c)"Magnetic gradiometers" specified in VII.A6.010 that will permit these sensors to realize a "sensitivity" lower (better) than 3 pT/m rms per square root HNote:Fibre optic "intrinsic magnetic gradiometers" having a magnetic gradient field "sensitivity" lower (better) than 0,3 nT/m (rms) per square root Hz;"Intrinsic magnetic gradiometers", using "technology" other than fibre-optic "technology", having a magnetic gradient field "sensitivity" lower (better) than 0,015 nT/m (rms) per square root Hz.	6A006
VII.A6.012	Underwater electromagnetic receivers incorporating "magnetometer" specified by section 1 or 2 "Magnetic and electric field sensors".	6A006

VII.A7.NAVIGATION AND AVIONICS

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
VII.A7.001	Accelerometers as follows and specially designed components therefor:(a)Linear accelerometers having any of the following:1.Specified to function at linear acceleration levels less than or equal to 15 g and having any of the following:a.A "bias" "stability" of less (better) than 130 micro g with respect to a fixed calibration value over a period of one year; orb.A "scale factor" "stability" of less (better) than 130 ppm with respect to a fixed calibration value over a period of one year;2.Specified to function at linear acceleration levels exceeding 15 g but less than or equal to 100 g and having all of the following:a.A "bias" "repeatability" of less (better) than 1250 micro g over a period of one year; andb.A "scale factor" "repeatability" of less (better) than 1250 ppm over a period of one year; or3.Designed for use in inertial navigation or guidance systems and specified to function at linear acceleration levels exceeding 100 g;Note: paragraphs above do not apply to accelerometers limited to measurement of only vibration or shock.(b)Angular or rotational accelerometers, specified to function at linear acceleration levels exceeding 100 g.	7A001
VII.A7.002	Gyros or angular rate sensors, having any of the following and specially designed components therefor:(a)Specified to function at linear acceleration levels less than or equal to 100 g and having any of the following:1.A rate range of less than 500 degrees per second and having any of the following:a.A "bias" "stability" of less (better) than 0,5 degree per hour, when measured in a 1 g environment over a period of one month, and with respect to a fixed calibration value; orb.An "angle random walk" of less (better) than or equal to 0,0035 degree per square root hour; orNote: this paragraph does not apply to "spinning mass gyros".2.A rate range greater than or equal to 500 degrees per second and having any of the following:a.A "bias" "stability" of less (better) than 4 degrees per hour, when measured in a 1 g environment over a period of three minutes, and with respect to a fixed calibration value; orb.An "angle random walk" of less (better) than or equal to 0,1 degree per square root hour; orNote: this paragraph does not apply to "spinning mass gyros".(b)Specified to function at linear acceleration levels exceeding 100 g.	7A002
VII.A7.003	"Inertial measurement equipment or systems", having any of the following:Notes:1."Inertial measurement equipment or systems" incorporate accelerometers or gyroscopes to measure changes in velocity and orientation in order to determine or maintain heading or position without requiring an external reference once aligned. "Inertial measurement equipment or systems" include:Attitude and Heading Reference Systems (AHRSs);Gyrocompasses;Inertial Measurement Units (IMUs);Inertial Navigation Systems (INSs);Inertial Reference Systems (IRSs);Inertial Reference Units (IRUs).2.This paragraph does not apply to "inertial measurement equipment or systems" which are certified for use on "civil aircraft" by civil aviation authorities of one or more Member States.(a)Designed for "aircraft", land vehicles or vessels, providing position without the use of "positional aiding references", and having any of the following "accuracies" subsequent to normal alignment:1.0,8 nautical miles per hour (nm/hr) "Circular Error Probable" ("CEP") rate or less (better);2.0,5 % distanced travelled "CEP" or less (better); or3.Total drift of 1 nautical mile "CEP" or less (better) in a 24 hr period;(b)Designed for "aircraft", land vehicles or vessels, with an embedded "positional aiding reference" and providing position after loss of all "positional aiding references" for a period of up to 4 minutes, having an "accuracy" of less (better) than 10 metres "CEP";(c)Designed for "aircraft", land vehicles or vessels, providing heading or True North determination and having any of the following:1.A maximum operating angular rate less (lower) than 500 deg/s and a heading "accuracy" without the use of "positional aiding references" equal to or less (better) than 0,07 deg sec(Lat) (equivalent to 6 arc minutes rms at 45 degrees latitude); or2.A maximum operating angular rate equal to or greater (higher) than 500 deg/s and a heading "accuracy" without the use of "positional aiding references" equal to or less (better) than 0,2 deg sec (Lat) (equivalent to 17 arc minutes rms at 45 degrees latitude);(d)Providing acceleration measurements or angular rate measurements, in more than one dimension, and having any of the following:1.Performance specified for accelerometers and gyros described above along any axis, without the use of any aiding references; or2.Being "space-qualified" and providing angular rate measurements having an "angle random walk" along any axis of less (better) than or equal to 0,1 degree per square root hour.	7A003

VII.A8.MARINE

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
VII.A8.001	Air independent power systems specially designed for underwater use, as follows:(a)Brayton or Rankine cycle engine air independent power systems having any of the following:1.Chemical scrubber or absorber systems, specially designed to remove carbon dioxide, carbon monoxide and particulates from recirculated engine exhaust;2.Systems specially designed to use a monoatomic gas;3.Devices or enclosures, specially designed for underwater noise reduction in frequencies below 10 kHz, or special mounting devices for shock mitigation; or4.Systems having all of the following:a.Specially designed to pressurise the products of reaction or for fuel reformation;b.Specially designed to store the products of the reaction; andc.Specially designed to discharge the products of the reaction against a pressure of 100 kPa or more;	8A002.j.
VII.A8.002	Diesel cycle engine air independent systems having all of the following:(a)Chemical scrubber or absorber systems, specially designed to remove carbon dioxide, carbon monoxide and particulates from recirculated engine exhaust;(b)Systems specially designed to use a monoatomic gas;(c)Devices or enclosures, specially designed for underwater noise reduction in frequencies below 10 kHz, or special mounting devices for shock mitigation; and(d)Specially designed exhaust systems that do not exhaust continuously the products of combustion;	8A002.j.
VII.A8.003	Fuel cell air independent power systems with an output exceeding 2kW and having any of the following:(a)Devices or enclosures, specially designed for underwater noise reduction in frequencies below 10 kHz, or special mounting devices for shock mitigation; or(b)Systems having all of the following:1.Specially designed to pressurise the products of reaction or for fuel reformation;2.Specially designed to store the products of the reaction; and3.Specially designed to discharge the products of the reaction against a pressure of 100 kPa or more	8A002.j.
VII.A8.004	Stirling cycle engine air independent power systems having all of the following:(a)Devices or enclosures, specially designed for underwater noise reduction in frequencies below 10 kHz, or special mounting devices for shock mitigation; and(b)Specially designed exhaust systems which discharge the products of combustion against a pressure of 100 kPa or more;	8A002.p.
VII.A8.005	Manned, tethered submersible vehicles designed to operate at depths exceeding 1000 m.	8A001.a.

VII.A9.AEROSPACE AND PROPULSION

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
VII.A9.001	Equipment, tooling or fixtures, specially designed for manufacturing gas turbine engine blades, vanes or "tip shrouds", as follows:(a)Directional solidification or single crystal casting equipment;(b)Casting tooling, manufactured from refractory metals or ceramics, as follows:1.Cores2.Shells (moulds)3.Combined core and shell (mould) units(c)Directional-solidification or single-crystal additive-manufacturing equipment.	9B001
VII.A9.002	Aero gas turbine engines, except aero gas turbine engines which meet all of the following:(a)Certified by civil aviation authorities of one or more Member States; and(b)Intended to power non-military manned "aircraft" for which any of the following has been issued by civil aviation authorities of one or more Member States for the "aircraft" with this specific engine type:1.A civil type certificate; or2.An equivalent document recognized by the International Civil Aviation Organization.	9A001

B.SOFTWARE

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
VII.B.001	"Software" for the "development" of the material listed in VII.A1.	1D002
VII.B.002	"Software" specially designed for the "development" or "production" of equipment as follows:(a)Machine tools for turning having two or more axes which can be coordinated simultaneously for "contouring control" having any of the following:1."Unidirectional positioning repeatability" equal to or less (better) than 0,9 μm along one or more linear axis with a travel length less than 1,0 m; or2."Unidirectional positioning repeatability" equal to or less (better) than 1,1 μm along one or more linear axis with a travel length equal to or greater than 1,0 m.(b)Machine tools for milling having any of the following:1.Three linear axes plus one rotary axis which can be coordinated simultaneously for "contouring control" having any of the following:a."Unidirectional positioning repeatability" equal to or less (better) than 0,9 μm along one or more linear axis with a travel length less than 1,0 m; orb."Unidirectional positioning repeatability" equal to or less (better) than 1,1 μm along one or more linear axis with a travel length equal to or greater than 1,0 m.2.Five or more axes which can be coordinated simultaneously for "contouring control" having any of the following:a."Unidirectional positioning repeatability" equal to or less (better) than 0,9 μm along one or more linear axis with a travel length less than 1,0 m;b."Unidirectional positioning repeatability" equal to or less (better) than 1,4 μm along one or more linear axis with a travel length equal to or greater than 1 m and less than 4 m;c."Unidirectional positioning repeatability" equal to or less (better) than 6,0 μm along one or more linear axis with a travel length equal to or greater than 4 m;3.A "unidirectional positioning repeatability" for jig boring machines equal to or less (better) than 1,1 μm along one or more linear axis.4.Electrical discharge machines of the non-wire type which have two or more rotary axes which can be coordinated simultaneously for "contouring control".5.Deep-hole-drilling machines and turning machines modified for deep-hole-drilling, having a maximum depth-of-bore capability exceeding 5 m.6."Numerically controlled" or manual machine tools, and specially designed components, controls and accessories therefor, specially designed for the shaving, finishing, grinding or honing of hardened (Rc = 40 or more) spur, helical and double-helical gears with a pitch diameter exceeding 1250 mm and a face width of 15 % of pitch diameter or larger finished to a quality of AGMA 14 or better (equivalent to ISO 1 328 class 3).	2D0012D002
VII.B.003	"Software" for marine systems, equipment, components, test, inspection and "production" equipment and other related technology	8D0018D002

C.TECHNOLOGY

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
VII.C.001	"Technology" for the "development" or "production" of equipment or materials listed in VII.A	1E0011E0021E1021E1031E1041E201
VII.C.002	"Technology" for the repair of "composite" structures, laminates or materials specified by the "systems, equipment and components" listed in VII.A1.Note: Does not apply to technology for the repair of civil aircraft structures using carbon "fibrous or filamentary materials" and epoxy resins, contained in aircraft manufacturers' manuals.	1E0011E0021E2011E103
VII.C.003	"Technology" for marine systems, equipment, components, test, inspection and "production" equipment and other related technology.	8E0018E002

PART VIIIWeapons of mass destruction-related items, materials, equipment, goods and technology designated, pursuant to paragraph 4 of UNSCR 2375 (2017).A.GOODSVIII.A0.NUCLEAR MATERIALS, FACILITIES, AND EQUIPMENT

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
VIII.A0.001	Ring magnets (except those designed for consumer electronics or automobile applications)	0B001
VIII.A0.002	Hot cells	0B006
VIII.A0.003	Glove boxes suitable for use with radioactive materials	0B005
VIII.A0.004	Electrolytic cells for fluorine production	0B001
VIII.A0.005	Particle accelerators	N/A
VIII.A0.006	Freon and chilled-water cooling systems capable of continuous cooling capacity of 100000 Btu/hr (29,3 kW) or greater	0B0010B0021B231
VIII.A0.007	Bellows-sealed valves	0B0012A226
VIII.A0.008	Monel equipment, including valves, piping, tanks and vessels (pipes and valves greater than 8-in diameter and rated for 500 psi and tanks greater than 500 l)	0B0012A2262B350
VIII.A0.009	Grade 304, 316 and austenitic stainless steel plates, valves, piping, tanks and vessels (pipes and valves greater than 8-in diameter and rated for 500 psi and tanks greater than 500 l)	0B0011C1161C216
VIII.A0.010	Vacuum valves, piping, flanges, gaskets and related equipment specially designed for use in high-vacuum service (0,1 Pa or lower pressure)	0B0010B0022A2262B350

VIII.A1.SPECIAL MATERIALS AND RELATED EQUIPMENT

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
VIII.A1.001	Radiation detection, monitoring and measurement equipment	1A0046A0026A102
VIII.A1.002	Radiographic detection equipment such as X-ray converters, and storage phosphor image plates (except X-ray equipment specially designed for medical use)	1B0019B007
VIII.A1.003	Tributyl phosphate (CAS 126-73-8)	N/A
VIII.A1.004	Nitric acid in concentrations of 20 % of weight or greater	1C111
VIII.A1.005	Fluorine (except that used for strictly civilian purposes, such as refrigerants, including freon and fluoride for toothpaste production)	1C350
VIII.A1.006	Alpha-emitting radionuclides	1C236
VIII.A1.007	Radiation-hardened television cameras	6A003

VIII.A2.MATERIALS PROCESSING

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
VIII.A2.001	Hardened steel and tungsten carbide precision ball bearings(3-mm diameter or greater)	2A0012A101
VIII.A2.002	Isostatic presses	2B0042B1042B204
VIII.A2.003	Electroplating equipment designed for coating parts with nickel or aluminium	2B005
VIII.A2.004	Bellows manufacturing equipment, including hydraulic forming equipment and bellows forming dies	2B0092B1092B209
VIII.A2.005	Metal inert gas welders(greater than 180 A DC)	N/A
VIII.A2.006	Centrifugal multiplane balancing machines	2B1192B219
VIII.A2.007	Seismic detection equipment or seismic intrusion-detection systems that detect, classify and determine the bearing of the source of a detected signal	2B1169B006

VIII.A3.ELECTRONICS

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
VIII.A3.001	Frequency changers capable of operating in the frequency range of 300-600 Hz	3A225
VIII.A3.002	Mass spectrometers	3A233
VIII.A3.003	All flash X-ray machines and "parts" or "components" of pulsed power systems designed therefrom, including Marx generators, high-power pulse-shaping networks, high-voltage capacitors and triggers	3A102
VIII.A3.004	Electronic equipment of synthesized frequencies within the range of 31,8 GHz or greater and power output of 100 mW or greater for time-delay generation or time-interval measurement, as follows:(a)digital time delay generators with a resolution of 50 nanoseconds or less over time intervals of 1 microsecond or greater; or(b)multichannel (i.e., with 3 or more channels) or modular time interval meters and chronometry equipment with resolution of 50 nanoseconds or less over time intervals of 1 microsecond or greater	3B002
VIII.A3.005	Chromatography and spectrometry analytical instruments	3A233

B.SOFTWARE

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
VIII.B.001	Software for neutronic calculations/modelling	0D001
VIII.B.002	Software for radiation transport calculations/modelling	0D001
VIII.B.003	Software for hydrodynamic calculations/modelling (except those used strictly for civilian purposes, such as but not limited to communal heating utilities)	0D001

PART IXConventional arms-related items, materials, equipment, goods and technology designated, pursuant to paragraph 5 of UNSCR 2375 (2017).A.GOODSIX.A1.SPECIAL MATERIALS AND RELATED EQUIPMENT

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
IX.A1.001	Seals, gaskets, sealants or fuel bladders, specially designed for "aircraft" or aerospace use, made from more than 50 % by weight of any of the fluorinated polyimides or fluorinated phosphazene elastomers.	1A001
IX.A1.002	Manufactures of non-"fusible" aromatic polyimides in film, sheet, tape or ribbon:(a)A thickness exceeding 0,254 mm; or(b)Coated or laminated with carbon, graphite, metals or magnetic substances.Note: The category above does not apply to manufactures when coated or laminated with copper and designed for the production of electronic printed circuit boards.	1A003
IX.A1.003	Protective and detection equipment and components, not specially designed for military use, as follows:(a)Full face masks, filter canisters, protective suits, gloves and shoes, detection systems and decontamination equipment specially designed or modified for defence against any of the following:1."Biological agents";2."Radioactive materials"; or3.Chemical warfare (CW) agents.	1A004.a.Except 1A004.a: riot control agents
IX.A1.004	Equipment and devices, specially designed to initiate charges and devices containing "energetic materials", by electrical means, as follows:(a)Explosive detonator firing sets designed to drive explosive detonators specified in item (b);(b)Electrically driven explosive detonators, as follows:1.Exploding bridge (EB);2.Exploding bridge wire (EBW);3.Slapper; or4.Exploding foil initiators (EFI).	1A007
IX.A1.005	Charges, devices and components, as follows:(a)"Shaped charges";1.Net Explosive Quantity (NEQ) greater than 90 g; and2.Outer casing diameter equal to or greater than 75 mm;(b)Linear shaped cutting charges;1.An explosive load greater than 40 g/m; and2.A width of 10 mm or more;(c)Detonating cord with explosive core load greater than 64 g/m; or(d)Cutters and severing tools, having a NEQ greater than 3,5 kg, and other severing tools.	1A008
IX.A1.006	Equipment for the production or inspection of "composite" structures or laminates or "fibrous or filamentary materials" as follows, and specially designed components and accessories therefor:(a)"Tow-placement machines", of which the motions for positioning and laying tows are coordinated and programmed in two or more "primary servo positioning" axes, specially designed for the manufacture of "composite" airframe or missile structures.	1B001.g.
IX.A1.007	Equipment for producing metal alloys, metal alloy powder or alloyed material specially designed to avoid contamination and specially designed for use in one of the following processes:(a)Vacuum atomization;(b)Gas atomization;(c)Rotary atomization;(d)Splat quenching;(e)Melt spinning and comminution;(f)Melt extraction and comminution;(g)Mechanical alloying; or(h)Plasma atomization.	1B002
IX.A1.008	Tools, dies, moulds or fixtures, for "superplastic forming" or "diffusion bonding" titanium, aluminium or their alloys:(a)Airframe or aerospace structures;(b)"Aircraft" or aerospace engines; or(c)Specially designed components for structures specified in item (a) or for engines specified in item (b).	1B003
IX.A1.009	Materials specially designed for use as absorbers of electromagnetic waves, or intrinsically conductive polymers, as follows:(a)Intrinsically conductive polymeric materials with a "bulk electrical conductivity" exceeding 10000 S/m (Siemens per metre) or a "sheet (surface) resistivity" of less than 100 ohms/square, based on any of the following polymers:1.Polyaniline;2.Polypyrrole;3.Polythiophene;4.Poly phenylene-vinylene; or5.Poly thienylene-vinylene.Technical note: "Bulk electrical conductivity" and "sheet (surface) resistivity" should be determined using ASTM D-257 or national equivalents.	1C001.c.
IX.A1.010	"Superconductive" "composite" conductors consisting of one or more "superconductive" "filaments", which remain "superconductive" above 115 K (– 158,16 °C).Technical note: For the purposes of the item above, "filaments" may be in wire, cylinder, film, tape or ribbon form.	1C005.a.
IX.A1.011	"Fibrous or filamentary materials", as follows:(a)Organic "fibrous or filamentary materials", having all of the following:1."Specific modulus" exceeding 12,7 × 106 m; and2."Specific tensile strength" exceeding 23,5 × 104 m;Note: This item does not apply to polyethylene.(b)Carbon "fibrous or filamentary materials", having all of the following:1."Specific modulus" exceeding 14,65 × 106 m; and2."Specific tensile strength" exceeding 26,82 × 104 m;(c)Inorganic "fibrous or filamentary materials", having all of the following:1."Specific modulus" exceeding 2,54 × 106 m; and2.Melting, softening, decomposition or sublimation point exceeding 1922 K (1649 °C) in an inert environment.	1C010.a.1C010.b.1C010.c.

IX.A2.MATERIALS PROCESSING

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
IX.A2.001	Anti-friction bearings and bearing systems, as follows, and components therefore:Note: This category does not apply to balls with tolerances specified by the manufacturer in accordance with ISO 3290 as grade 5 or worse.(a)Ball bearings and solid roller bearings, having all tolerances specified by the manufacturer in accordance with ISO 492 Tolerance Class 4 (or national equivalents) or better, and having both "rings" and "rolling elements", made from monel or beryllium;Technical notes:1."Ring" —annular part of a radial rolling bearing incorporating one or more raceways (ISO 5593:1997).2."Rolling element" —ball or roller which rolls between raceways (ISO 5593:1997).(b)Active magnetic bearing systems using any of the following:1.Materials with flux densities of 2,0 T or greater and yield strengths greater than 414 MPa;2.All-electromagnetic three-dimensional homopolar bias designs for actuators; or3.High-temperature (450 K (177 °C) and above) position sensors.	2A001.a.2A001.c.
IX.A2.002	Machine tools and any combination thereof, for removing (or cutting) metals, ceramics or "composites", which, according to the manufacturer's technical specification, can be equipped with electronic devices for "numerical control":(a)Machine tools for grinding having any of the following:1.Three or more axes which can be coordinated simultaneously for "contouring control" and a "unidirectional positioning repeatability" equal to or less (better) than 1,1 μm along one or more linear axis; or2.Five or more axes which can be coordinated simultaneously for "contouring control";(b)Machine tools for removing metals, ceramics or "composites", having all of the following:1.Removing material by means of any of the following:a.Water or other liquid jets, including those employing abrasive additives;b.Electron beam; orc."Laser" beam; and2.At least two rotary axes that can be coordinated simultaneously for "contouring control".	2B001.c.
IX.A2.003	Numerically controlled optical finishing machine tools equipped for selective material removal to produce non-spherical optical surfaces having all of the following characteristics:(a)Finishing the form to less (better) than 1,0 μm;(b)Finishing to a roughness less (better) than 100 nm rms;(c)Four or more axes which can be coordinated simultaneously for "contouring control"; and(d)Using any of the following processes:1."Magnetorheological finishing (MRF)";2."Electrorheological finishing (ERF)";3."Energetic particle beam finishing";4."Inflatable membrane tool finishing"; or5."Fluid jet finishing".Technical notes: For the purposes of the items above:1."MRF" is a material removal process using an abrasive magnetic fluid whose viscosity is controlled by a magnetic field.2."ERF" is a removal process using an abrasive fluid whose viscosity is controlled by an electric field.3."Energetic particle beam finishing" uses Reactive Atom Plasmas (RAP) or ion beams to selectively remove material.4."Inflatable membrane tool finishing" is a process that uses a pressurized membrane that deforms to contact the workpiece over a small area5."Fluid jet finishing" makes use of a fluid stream for material removal	2B002.a.2B002.b.2B002.c.2B002.d.
IX.A2.004	Hot "isostatic presses" having all of the following, and specially designed components and accessories therefor:(a)A controlled thermal environment within the closed cavity and a chamber cavity with an inside diameter of 406 mm or more; and(b)Having any of the following:1.A maximum working pressure exceeding 207 MPa;2.A controlled thermal environment exceeding 1773 K (1500 °C); or3.A facility for hydrocarbon impregnation and removal of resultant gaseous degradation products.	2B0042B1042B204
IX.A2.005	Equipment specially designed for the deposition, processing and in-process control of inorganic overlays, coatings and surface modifications, as follows:(a)Chemical vapour deposition (CVD) production equipment having all of the following:1.A process modified for one of the following:a.Pulsating CVD;b.Controlled nucleation thermal deposition (CNTD); orc.Plasma enhanced or plasma assisted CVD; and2.Having any of the following:a.Incorporating high vacuum (equal to or less than 0,01 Pa) rotating seals; orb.Incorporating in situ coating thickness control;(b)Ion implantation production equipment having beam currents of 5 mA or more;(c)Electron beam physical vapour deposition (EB-PVD) production equipment incorporating power systems rated for over 80 kW and having any of the following:1.A liquid pool level "laser" control system which regulates precisely the ingots feed rate; or2.A computer controlled rate monitor operating on the principle of photo-luminescence of the ionized atoms in the evaporant stream to control the deposition rate of a coating containing two or more elements;(d)Plasma spraying production equipment having any of the following:1.Operating at reduced pressure controlled atmosphere (equal to or less than 10 kPa measured above and within 300 mm of the gun nozzle exit) in a vacuum chamber capable of evacuation down to 0,01 Pa prior to the spraying process; or2.Incorporating in situ coating thickness control;(e)Sputter deposition production equipment capable of current densities of 0,1 mA/mm2 or higher at a deposition rate of 15 μm/h or more;(f)Cathodic arc deposition production equipment incorporating a grid of electromagnets for steering control of the arc spot on the cathode; or(g)Ion plating production equipment capable of in situ measurement of any of the following:1.Coating thickness on the substrate and rate control; or2.Optical characteristics.	2B005
IX.A2.006	Dimensional inspection or measuring systems, equipment and "electronic assemblies", as follows:(a)Computer-controlled or "numerically controlled" Coordinate Measuring Machines (CMM), having a three-dimensional (volumetric) maximum permissible error of length measurement (E0,MPE) at any point within the operating range of the machine (i.e., within the length of axes) equal to or less (better) than 1,7 + L/1000 μm (L is the measured length in mm), according to ISO 10360-2 (2009);(b)Linear and angular displacement measuring instruments, as follows:1."Linear displacement" measuring instruments having any of the following:a.Non-contact-type measuring systems with a "resolution" equal to or less (better) than 0,2 μm within a measuring range up to 0,2 mm;b.Linear Variable Differential Transformer (LVDT) systems:1.Having any of the following:a."Linearity" equal to or less (better) than 0,1 % measured from 0 to the "full operating range", for LVDTs with a "full operating range" up to and including ± 5 mm; orb."Linearity" equal to or less (better) than 0,1 % measured from 0 to 5 mm for LVDTs with a "full operating range" greater than ± 5 mm; and2.Drift equal to or less (better) than 0,1 % per day at a standard ambient test room temperature ± 1 K;Technical note:For the purposes of item b. above, "full operating range" is half of the total possible linear displacement of the LVDT. For example, LVDTs with a "full operating range" up to and including ± 5 mm can measure a total possible linear displacement of 10 mm.c.Measuring systems having all of the following:1.Containing a "laser";2.A "resolution" over their full scale of 0,200 nm or less (better); and3.Capable of achieving a "measurement uncertainty" equal to or less (better) than (1,6 + L/2000) nm (L is the measured length in mm) at any point within a measuring range, when compensated for the refractive index of air and measured over a period of 30 seconds at a temperature of 20 ± 0,01 °C; ord."Electronic assemblies" specially designed to provide feedback capability in systems specified above;2.Angular displacement measuring instruments;Note: The category above does not apply to optical instruments, such as autocollimators, using collimated light (e.g., "laser" light) to detect angular displacement of a mirror.(c)Equipment for measuring surface roughness (including surface defects), by measuring optical scatter with a sensitivity of 0,5 nm or less (better).	2B006.b.2B206.b.
IX.A2.007	"Robots" having any of the following characteristics and specially designed controllers and "end-effectors" therefor:(a)Capable in real time of full three-dimensional image processing or full three-dimensional "scene analysis" to generate or modify "programs" or to generate or modify numerical program data;Technical note:The "scene analysis" limitation does not include approximation of the third dimension by viewing at a given angle, or limited greyscale interpretation for the perception of depth or texture for the approved tasks (2 1/2 D).(b)Specially designed to comply with national safety standards applicable to potentially explosive munitions environments;(c)Specially designed or rated as radiation-hardened to withstand greater than 5 × 103 Gy (Si) without operational degradation; or(d)Specially designed to operate at altitudes exceeding 30000 m.	2B0072B207
IX.A2.008	Assemblies or units, specially designed for machine tools, or dimensional inspection or measuring systems and equipment, as follows:(a)Linear position feedback units having an overall "accuracy" less (better) than (800 + (600 × L/1000)) nm (L equals the effective length in mm);(b)Rotary position feedback units having an "accuracy" less (better) than 0,00025 °; or(c)"Compound rotary tables" and "tilting spindles", for use with machine tools to or above the levels specified by this category.	2B008
IX.A2.009	Spin-forming machines and flow-forming machines, which, according to the manufacturer's technical specification, can be equipped with "numerical control" units or a computer control and having all of the following:(a)Three or more axes which can be coordinated simultaneously for "contouring control"; and(b)A roller force more than 60 kN.Technical note: Machines combining the functions of spin-forming and flow-forming are regarded as flow-forming machines.	2B0092B1092B209

IX.A3.ELECTRONICS

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
IX.A3.001	Electronic items, as follows:(a)General-purpose integrated circuits, as follows:Notes:1.The status of wafers (finished or unfinished), in which the function has been determined, is to be evaluated against the parameters of 3A001.a.2.Integrated circuits include the following types:"Monolithic integrated circuits";"Hybrid integrated circuits";"Multichip integrated circuits";"Film-type integrated circuits", including silicon-on-sapphire integrated circuits;"Optical integrated circuits";"Three-dimensional integrated circuits";"Monolithic Microwave Integrated Circuits" ("MMICs").	3A001.a
IX.A3.002	Integrated circuits designed or rated as radiation hardened to withstand any of the following:(a)A total dose of 5 × 103 Gy (Si) or higher;(b)A dose rate upset of 5 × 106 Gy (Si)/s or higher; or(c)A fluence (integrated flux) of neutrons (1 MeV equivalent) of 5 × 1013 n/cm2 or higher on silicon, or its equivalent for other materials;Note: The category above does not apply to Metal Insulator Semiconductors (MIS).	3A001.a.
IX.A3.003	"Microprocessor microcircuits","microcomputer microcircuits", microcontroller microcircuits, storage integrated circuits manufactured from a compound semiconductor, analogue-to-digital converters, integrated circuits that contain analogue-to-digital converters and store or process the digitized data, digital-to-analogue converters, electro-optical or "optical integrated circuits" designed for "signal processing", field programmable logic devices, custom integrated circuits for which either the function is unknown or the status of the equipment in which the integrated circuit will be used is unknown, Fast Fourier Transform (FFT) processors, Electrical Erasable Programmable Read-Only Memories (EEPROMs), flash memories, Static Random-Access Memories (SRAMs) or Magnetic Random-Access Memories (MRAMs), having any of the following:(a)Rated for operation at an ambient temperature above 398 K (+ 125 °C);(b)Rated for operation at an ambient temperature below 218 K (– 55 °C); or(c)Rated for operation over the entire ambient temperature range from 218 K (– 55 °C) to 398 K (+ 125 °C);Note: This category does not apply to integrated circuits for civil automobile or railway train applications.	3A001.a.2
IX.A3.004	Electro-optical and "optical integrated circuits", designed for "signal processing" and having all of the following:(a)One or more than one internal "laser" diode;(b)One or more than one internal light detecting element; and(c)Optical waveguides;	3A001.a.
IX.A3.005	4.Field programmable logic devices having any of the following:(a)A maximum number of single-ended digital input/outputs of greater than 700; or(b)An "aggregate one-way peak serial transceiver data rate" of 500 Gb/s or greater;Note: This category includesSimple Programmable Logic Devices (SPLDs);Complex Programmable Logic Devices (CPLDs);Field Programmable Gate Arrays (FPGAs);Field Programmable Logic Arrays (FPLAs);Field Programmable Interconnects (FPICs).	3A001.a.
IX.A3.006	Neural network integrated circuits;	3A001.a.
IX.A3.007	Custom integrated circuits for which the function is unknown, or the status of the equipment in which the integrated circuits will be used is unknown to the manufacturer, having any of the following:(a)More than 1500 terminals;(b)A typical "basic gate propagation delay time" of less than 0,02 ns; or(c)An operating frequency exceeding 3 GHz;	3A001.a.
IX.A3.008	Direct Digital Synthesizer (DDS) integrated circuits having any of the following:(a)A Digital-to-Analogue Converter (DAC) clock frequency of 3,5 GHz or more and a DAC resolution of 10 bit or more, but less than 12 bit; or(b)A DAC clock frequency of 1,25 GHz or more and a DAC resolution of 12 bit or more;Technical note: The DAC clock frequency may be specified as the master clock frequency or the input clock frequency.	3A001.a.
IX.A3.009	Microwave or millimetre wave items, as follows:(a)Travelling-wave "vacuum electronic devices", pulsed or continuous wave;1.Devices operating at frequencies exceeding 31,8 GHz;2.Devices having a cathode heater with a turn-on time to rated RF power of less than 3 seconds;3.Coupled cavity devices, or derivatives thereof, with a "fractional bandwidth" of more than 7 % or a peak power exceeding 2,5 kW;4.Devices based on helix, folded waveguide, or serpentine waveguide circuits, or derivatives thereof, having any of the following:a.An "instantaneous bandwidth" of more than one octave, and average power (expressed in kW) times frequency (expressed in GHz) of more than 0,5;b.An "instantaneous bandwidth" of one octave or less, and average power (expressed in kW) times frequency (expressed in GHz) of more than 1;c.Being "space-qualified"; ord.Having a gridded electron gun;5.Devices with a "fractional bandwidth" of greater than or equal to 10 %, with any of the following:a.An annular electron beam;b.A non-axisymmetric electron beam; orc.Multiple electron beams;(b)Crossed-field amplifier "vacuum electronic devices" with a gain of more than 17 dB;(c)Thermionic cathodes designed for "vacuum electronic devices" producing an emission current density at rated operating conditions exceeding 5 A/cm2 or a pulsed (non-continuous) current density at rated operating conditions exceeding 10 A/cm2;(d)"Vacuum electronic devices" with the capability to operate in a "dual mode";Technical note: "Dual mode" means that the "vacuum electronic device" beam current can be intentionally changed between continuous-wave and pulsed mode operation by use of a grid and produces a peak pulse output power greater than the continuous-wave output power.	3A001.b.
IX.A3.010	"Monolithic Microwave Integrated Circuit" ("MMIC") amplifiers that are any of the following:(a)Rated for operation at frequencies exceeding 2,7 GHz up to and including 6,8 GHz with a "fractional bandwidth" of greater than 15 %, and having any of the following:1.A peak saturated power output greater than 75 W (48,75 dBm) at any frequency exceeding 2,7 GHz up to and including 2,9 GHz;2.A peak saturated power output greater than 55 W (47,4 dBm) at any frequency exceeding 2,9 GHz up to and including 3,2 GHz;3.A peak saturated power output greater than 40 W (46 dBm) at any frequency exceeding 3,2 GHz up to and including 3,7 GHz; or4.A peak saturated power output greater than 20 W (43 dBm) at any frequency exceeding 3,7 GHz up to and including 6,8 GHz;(b)Rated for operation at frequencies exceeding 6,8 GHz up to and including 16 GHz with a "fractional bandwidth" of greater than 10 %, and having any of the following:1.A peak saturated power output greater than 10W (40 dBm) at any frequency exceeding 6,8 GHz up to and including 8,5 GHz; or2.A peak saturated power output greater than 5W (37 dBm) at any frequency exceeding 8,5 GHz up to and including 16 GHz;(c)Rated for operation with a peak saturated power output greater than 3 W (34,77 dBm) at any frequency exceeding 16 GHz up to and including 31,8 GHz, and with a "fractional bandwidth" of greater than 10 %;(d)Rated for operation with a peak saturated power output greater than 0,1n W (– 70 dBm) at any frequency exceeding 31,8 GHz up to and including 37 GHz;(e)Rated for operation with a peak saturated power output greater than 1 W (30 dBm) at any frequency exceeding 37 GHz up to and including 43,5 GHz, and with a "fractional bandwidth" of greater than 10 %;(f)Rated for operation with a peak saturated power output greater than 31,62 mW (15 dBm) at any frequency exceeding 43,5 GHz up to and including 75 GHz, and with a "fractional bandwidth" of greater than 10 %;(g)Rated for operation with a peak saturated power output greater than 10 mW (10 dBm) at any frequency exceeding 75 GHz up to and including 90 GHz, and with a "fractional bandwidth" of greater than 5 %; or(h)Rated for operation with a peak saturated power output greater than 0,1 nW (– 70 dBm) at any frequency exceeding 90 GHz;Notes:1.The status of the MMIC whose rated operating frequency includes frequencies listed in more than one frequency range is determined by the lowest peak saturated power output threshold.2.This category does not apply to MMICs if they are specially designed for other applications, e.g., telecommunications, radar, automobiles.	3A001.b.
IX.A3.011	Discrete microwave transistors that are any of the following:a.Rated for operation at frequencies exceeding 2,7 GHz up to and including 6,8 GHz and having any of the following:1.A peak saturated power output greater than 400 W (56 dBm) at any frequency exceeding 2,7 GHz up to and including 2,9 GHz;2.A peak saturated power output greater than 205 W (53,12 dBm) at any frequency exceeding 2,9 GHz up to and including 3,2 GHz;3.A peak saturated power output greater than 115 W (50,61 dBm) at any frequency exceeding 3,2 GHz up to and including 3,7 GHz; or4.A peak saturated power output greater than 60 W (47,78 dBm) at any frequency exceeding 3,7 GHz up to and including 6,8 GHz;b.Rated for operation at frequencies exceeding 6,8 GHz up to and including 31,8 GHz and having any of the following:1.A peak saturated power output greater than 50 W (47 dBm) at any frequency exceeding 6,8 GHz up to and including 8,5 GHz;2.A peak saturated power output greater than 15 W (41,76 dBm) at any frequency exceeding 8,5 GHz up to and including 12 GHz;3.A peak saturated power output greater than 40 W (46 dBm) at any frequency exceeding 12 GHz up to and including 16 GHz; or4.A peak saturated power output greater than 7 W (38,45 dBm) at any frequency exceeding 16 GHz up to and including 31,8 GHz;c.Rated for operation with a peak saturated power output greater than 0,5 W (27 dBm) at any frequency exceeding 31,8 GHz up to and including 37 GHz;d.Rated for operation with a peak saturated power output greater than 1 W (30 dBm) at any frequency exceeding 37 GHz up to and including 43,5 GHz; ore.Rated for operation with a peak saturated power output greater than 0,1 nW (-70 dBm) at any frequency exceeding 43,5 GHz;Notes:1.The status of a transistor whose rated operating frequency includes frequencies listed in more than one frequency range is determined by the lowest peak saturated power output threshold.2.This category includes bare dice, dice mounted on carriers or dice mounted in packages. Some discrete transistors may also be referred to as power amplifiers.	3A001.b.
IX.A3.012	Microwave solid-state amplifiers and microwave assemblies/modules containing microwave solid-state amplifiers that are any of the following:(a)Rated for operation at frequencies exceeding 2,7 GHz up to and including 6,8 GHz with a "fractional bandwidth" of greater than 15 % and having any of the following:1.A peak saturated power output greater than 500 W (57 dBm) at any frequency exceeding 2,7 GHz up to and including 2,9 GHz;2.A peak saturated power output greater than 270 W (54,3 dBm) at any frequency exceeding 2,9 GHz up to and including 3,2 GHz;3.A peak saturated power output greater than 200 W (53 dBm) at any frequency exceeding 3,2 GHz up to and including 3,7 GHz; or4.A peak saturated power output greater than 90 W (49,54 dBm) at any frequency exceeding 3,7 GHz up to and including 6,8 GHz;(b)Rated for operation at frequencies greater than 6,8 GHz up to and including 31,8 GHz with a "fractional bandwidth" of greater than 10 % and having any of the following:1.A peak saturated power output greater than 70 W (48,54 dBm) at any frequency exceeding 6,8 GHz up to and including 8,5 GHz;2.A peak saturated power output greater than 50 W (47 dBm) at any frequency exceeding 8,5 GHz up to and including 12 GHz;3.A peak saturated power output greater than 30 W (44,77 dBm) at any frequency exceeding 12 GHz up to and including 16 GHz; or4.A peak saturated power output greater than 20 W (43 dBm) at any frequency exceeding 16 GHz up to and including 31,8 GHz;(c)Rated for operation with a peak saturated power output greater than 0,5 W (27 dBm) at any frequency exceeding 31,8 GHz up to and including 37 GHz;(d)Rated for operation with a peak saturated power output greater than 2 W (33 dBm) at any frequency exceeding 37 GHz up to and including 43,5 GHz, and with a "fractional bandwidth" of greater than 10 %;(e)Rated for operation at frequencies exceeding 43,5 GHz and having any of the following:1.A peak saturated power output greater than 0,2 W (23 dBm) at any frequency exceeding 43,5 GHz up to and including 75 GHz, and with a "fractional bandwidth" of greater than 10 %;2.A peak saturated power output greater than 20 mW (13 dBm) at any frequency exceeding 75 GHz up to and including 90 GHz, and with a "fractional bandwidth" of greater than 5 %; or3.A peak saturated power output greater than 0,1 nW (- 70 dBm) at any frequency exceeding 90 GHz;Note: The status of an item whose rated operating frequency includes frequencies listed in more than one frequency range is determined by the lowest peak saturated power output threshold.	3A001.b.
IX.A3.013	Electronically or magnetically tunable band-pass or band-stop filters, having more than 5 tunable resonators capable of tuning across a 1,5:1 frequency band (fmax/fmin) in less than 10 μs and having any of the following:(a)A band-pass bandwidth of more than 0,5 % of centre frequency; or(b)A band-stop bandwidth of less than 0,5 % of centre frequency;	3A001.b.
IX.A3.014	Converters and harmonic mixers that are any of the following:(a)Designed to extend the frequency range of "signal analysers" beyond 90 GHz;(b)Designed to extend the operating range of signal generators as follows:1.Beyond 90 GHz;2.To an output power greater than 100 mW (20 dBm) anywhere within the frequency range exceeding 43,5 GHz but not exceeding 90 GHz;(c)Designed to extend the operating range of network analysers as follows:1.Beyond 110 GHz;2.To an output power greater than 31,62 mW (15 dBm) anywhere within the frequency range exceeding 43,5 GHz but not exceeding 90 GHz;3.To an output power greater than 1 mW (0 dBm) anywhere within the frequency range exceeding 90 GHz but not exceeding 110 GHz; or(d)Designed to extend the frequency range of microwave test receivers beyond 110 GHz;	3A001.b.
IX.A3.015	Microwave power amplifiers containing "vacuum electronic devices" specified above and having all of the following:(a)Operating frequencies above 3 GHz;(b)An average output power to mass ratio exceeding 80 W/kg; and(c)A volume of less than 400 cm3;Note: This category does not apply to equipment designed or rated for operation in any frequency band which is "allocated by the International Telecommunication Union (ITU)" for radio communications services, but not for radio determination.	3A001.b.
IX.A3.016	Microwave Power Modules (MPMs) consisting of, at least, a travelling-wave "vacuum electronic device", a "Monolithic Microwave Integrated Circuit" ("MMIC") and an integrated electronic power conditioner and having all of the following:(a)A "turn-on time" from off to fully operational in less than 10 seconds;(b)A volume less than the maximum rated power in watts multiplied by 10 cm3/W; and(c)An "instantaneous bandwidth" of greater than 1 octave (fmax > 2fmin) and having any of the following:1.For frequencies equal to or less than 18 GHz, an RF output power greater than 100 W; or2.A frequency greater than 18 GHz;Technical notes:1.To calculate the volume in item b. above, the following example is provided: for a maximum rated power of 20 W, the volume would be: 20 W × 10 cm3/W = 200 cm3.2.The "turn-on time" in item a. above refers to the time from fully off to fully operational, i.e., it includes the warm-up time of the MPM.	3A001.b.
IX.A3.017	Oscillators or oscillator assemblies, specified to operate with a single sideband (SSB) phase noise, in dBc/Hz, less (better) than -(126 + 20log10F -20log10f) anywhere within the range of 10 Hz ≤ F ≤ 10 kHz;Technical note:In the category above, F is the offset from the operating frequency in Hz and f is the operating frequency in MHz.	3A001.b.
IX.A3.018	"Frequency synthesizer" "electronic assemblies" having a "frequency switching time" as specified by any of the following:(a)Less than 143 ps;(b)Less than 100 μs for any frequency change exceeding 2,2 GHz within the synthesized frequency range exceeding 4,8 GHz but not exceeding 31,8 GHz;(c)Less than 500 μs for any frequency change exceeding 550 MHz within the synthesized frequency range exceeding 31,8 GHz but not exceeding 37 GHz;(d)Less than 100 μs for any frequency change exceeding 2,2 GHz within the synthesized frequency range exceeding 37 GHz but not exceeding 90 GHz; or(e)Less than 1 ms within the synthesized frequency range exceeding 90 GHz;	3A001.b.
IX.A3.019	"Transmit/receive modules", "transmit/receive MMICs", "transmit modules" and "transmit MMICs", rated for operation at frequencies above 2,7 GHz and having all of the following:(a)A peak saturated power output (in watts), Psat, greater than 505,62 divided by the maximum operating frequency (in GHz) squared [Psat > 505,62 W * GHz2/fGHz2] for any channel;(b)A "fractional bandwidth" of 5 % or greater for any channel;(c)Any planar side with length d (in cm) equal to or less than 15 divided by the lowest operating frequency in GHz [d ≤ 15 cm * GHz * N/fGHz] where N is the number of transmit or transmit/receive channels; and(d)An electronically variable phase shifter per channel;Technical notes:1.A "transmit/receive module" is a multifunction "electronic assembly" that provides bidirectional amplitude and phase control for transmission and reception of signals.2.A "transmit module" is an "electronic assembly" that provides amplitude and phase control for transmission of signals.3.A "transmit/receive MMIC" is a multifunction "MMIC" that provides bidirectional amplitude and phase control for transmission and reception of signals.4.A "transmit MMIC" is a "MMIC" that provides amplitude and phase control for transmission of signals.5.2,7 GHz should be used as the lowest operating frequency (fGHz) in the formula in item (c) for transmit/receive or transmit modules that have a rated operation range extending downward to 2,7 GHz and below [d ≤15 cm * GHz * N/2,7 GHz].6.Item IX.A3.019 applies to "transmit/receive modules" or "transmit modules" with or without a heat sink. The value of d in item 11.c. does not include any portion of the "transmit/receive module" or "transmit module" that functions as a heat sink.7."Transmit/receive modules", "transmit modules", "transmit/receive MMICs" or "transmit MMICs" may or may not have N integrated radiating antenna elements where N is the number of transmit or transmit/receive channels.	3A001.b.
IX.A3.020	Surface acoustic wave and surface skimming (shallow bulk) acoustic devices with any of the following:(a)A carrier frequency exceeding 6 GHz;(b)A carrier frequency exceeding 1 GHz, but not exceeding 6 GHz and having any of the following:1.A "frequency side-lobe rejection" exceeding 65 dB;2.A product of the maximum delay time and the bandwidth (time in μs and bandwidth in MHz) of more than 100;3.A bandwidth of greater than 250 MHz; or4.A dispersive delay of more than 10 μs; or(c)A carrier frequency of 1 GHz or less and having any of the following:1.A product of the maximum delay time and the bandwidth (time in μs and bandwidth in MHz) of more than 100;2.A dispersive delay of more than 10 μs; or3.A "frequency side-lobe rejection" exceeding 65 dB and a bandwidth greater than 100 MHz;	3A001.c.
IX.A3.021	Bulk (volume) acoustic wave which permit the direct processing of signals at frequencies exceeding 6 GHz;	3A001.c.
IX.A3.022	Acoustic-optic "signal processing" devices employing interaction between acoustic waves (bulk wave or surface wave) and light waves which permit the direct processing of signals or images, including spectral analysis, correlation or convolution;	3A001.c.
IX.A3.023	Electronic devices and circuits containing components, manufactured from "superconductive" materials, specially designed for operation at temperatures below the "critical temperature" of at least one of the "superconductive" constituents and having any of the following:(a)Current switching for digital circuits using "superconductive" gates with a product of delay time per gate (in seconds) and power dissipation per gate (in watts) of less than 10– 14 J; or(b)Frequency selection at all frequencies using resonant circuits with Q-values exceeding 10000;	3A001.d.
IX.A3.024	High-energy cells, as follows:(a)"Primary cells" having an "energy density" exceeding 550 Wh/kg at 20 °C;(b)"Secondary cells" having an "energy density" exceeding 350 Wh/kg at 20 °C;Technical notes:1.For the purposes of high-energy devices, "energy density" (Wh/kg) is calculated from the nominal voltage multiplied by the nominal capacity in ampere-hours (Ah) divided by the mass in kilograms. If the nominal capacity is not stated, energy density is calculated from the nominal voltage squared, then multiplied by the discharge duration in hours divided by the discharge load in Ohms and the mass in kilograms.2.For the purposes of high-energy devices, a "cell" is defined as an electrochemical device, which has positive and negative electrodes and an electrolyte, and is a source of electrical energy. It is the basic building block of a battery.3.For the purposes of high-energy devices, a "primary cell" is a "cell" that is not designed to be charged by any other source.4.For the purposes of high-energy devices, a "secondary cell" is a "cell" that is designed to be charged by an external electrical source.Note: High-energy devices do not apply to batteries, including single-cell batteries.	3A001.e.
IX.A3.025	High-energy storage capacitors, as follows:(a)Capacitors with a repetition rate of less than 10 Hz (single shot capacitors) and having all of the following:1.A voltage rating equal to or more than 5 kV;2.An energy density equal to or more than 250 J/kg; and3.A total energy equal to or more than 25 kJ;(b)Capacitors with a repetition rate of 10 Hz or more (repetition rated capacitors) and having all of the following:1.A voltage rating equal to or more than 5 kV;2.An energy density equal to or more than 50 J/kg;3.A total energy equal to or more than 100 J; and4.A charge/discharge cycle life equal to or more than 10000;	3A001.e.
IX.A3.026	"Superconductive" electromagnets and solenoids, specially designed to be fully charged or discharged in less than one second and having all of the following:Note: The item above does not apply to "superconductive" electromagnets or solenoids specially designed for Magnetic Resonance Imaging (MRI) medical equipment.(a)Energy delivered during the discharge exceeding 10 kJ in the first second;(b)Inner diameter of the current carrying windings of more than 250 mm; and(c)Rated for a magnetic induction of more than 8 T or "overall current density" in the winding of more than 300 A/mm2;	3A001.e.
IX.A3.027	Solar cells, cell-interconnect-coverglass (CIC) assemblies, solar panels, and solar arrays, which are "space-qualified", having a minimum average efficiency exceeding 20 % at an operating temperature of 301 K (28 °C) under simulated "AM0" illumination with an irradiance of 1367 watts per square metre (W/m2);Technical note: "AM0", or "Air Mass Zero", refers to the spectral irradiance of sunlight in the Earth's outer atmosphere when the distance between the Earth and the sun is one astronomical unit (AU).	3A001.e.
IX.A3.028	Rotary input type absolute position encoders having an "accuracy" equal to or less (better) than 1,0 second of arc and specially designed encoder rings, discs or scales therefor;	3A001.f.
IX.A3.029	Solid-state pulsed power switching thyristor devices and "thyristor modules", using either electrically, optically or electron radiation controlled switch methods and having any of the following:1.A maximum turn-on current rate of rise (di/dt) greater than 30000 A/μs and off-state voltage greater than 1100 V; or2.A maximum turn-on current rate of rise (di/dt) greater than 2000 A/μs and having all of the following:a.An off-state peak voltage equal to or greater than 3000 V; andb.A peak (surge) current equal to or greater than 3000 A;Notes:1.Item (g) above includes:Silicon Controlled Rectifiers (SCRs);Electrical Triggering Thyristors (ETTs);Light Triggering Thyristors (LTTs);Integrated Gate Commutated Thyristors (IGCTs);Gate Turn-off Thyristors (GTOs);MOS Controlled Thyristors (MCTs);Solidtrons.2.Item (g) above does not apply to thyristor devices and "thyristor modules" incorporated into equipment designed for civil railway or "civil aircraft" applications.Technical note: For the purposes of item (g) above, a "thyristor module" contains one or more thyristor devices.	3A001.g.
IX.A3.030	Solid-state power semiconductor switches, diodes or "modules", having all of the following:1.Rated for a maximum operating junction temperature greater than 488 K (215 °C);2.Repetitive peak off-state voltage (blocking voltage) exceeding 300 V; and3.Continuous current greater than 1 A.Note: Repetitive peak off-state voltage in the item above includes drain to source voltage, collector to emitter voltage, repetitive peak reverse voltage and peak repetitive off-state blocking voltage.	3A001.h.
IX.A3.031	Recording equipment and oscilloscopes, as follows1.Digital data recorders having all of the following:a.A sustained "continuous throughput" of more than 6,4 Gbit/s to disk or solid-state drive memory; andb.A processor that performs analysis of radio frequency signal data while it is being recorded;Technical notes:1.For recorders with a parallel bus architecture, the "continuous throughput" rate is the highest word rate multiplied by the number of bits in a word.2."Continuous throughput" is the fastest data rate the instrument can record to disk or solid-state drive memory without the loss of any information while sustaining the input digital data rate or digitizer conversion rate.2.Real-time oscilloscopes having a vertical root-mean-square (rms) noise voltage of less than 2 % of full-scale at the vertical scale setting that provides the lowest noise value for any input 3 dB bandwidth of 60 GHz or greater per channel;	3A002.a.
IX.A3.032	"Signal analysers", as follows:1."Signal analysers" having a 3 dB resolution bandwidth (RBW) exceeding 10 MHz anywhere within the frequency range exceeding 31,8 GHz but not exceeding 37 GHz;2."Signal analysers" having Displayed Average Noise Level (DANL) less (better) than - 150 dBm/Hz anywhere within the frequency range exceeding 43,5 GHz but not exceeding 90 GHz;3."Signal analysers" having a frequency exceeding 90 GHz;4."Signal analysers" having all of the following:a."Real-time bandwidth" exceeding 170 MHz; andb.Having any of the following:1.100 % probability of discovery, with less than a 3 dB reduction from full amplitude due to gaps or windowing effects, of signals having a duration of 15 μs or less; or2.A "frequency mask trigger" function with 100 % probability of trigger (capture) for signals having a duration of 15 μs or less;Technical notes:1.Probability of discovery in item 1. above is also referred to as probability of intercept or probability of capture.2.For the purposes of item 1. above, the duration for 100 % probability of discovery is equivalent to the minimum signal duration necessary for the specified level measurement uncertainty.Note: The category above does not apply to those "signal analysers" using only constant percentage bandwidth filters (also known as octave or fractional octave filters).	3A002.c.
IX.A3.033	Signal generators having any of the following:1.Specified to generate pulse-modulated signals having all of the following, anywhere within the frequency range exceeding 31,8 GHz but not exceeding 37 GHz:a."Pulse duration" of less than 25 ns; andb.On/off ratio equal to or exceeding 65 dB;2.An output power exceeding 100 mW (20 dBm) anywhere within the frequency range exceeding 43,5 GHz but not exceeding 90 GHz;3.A "frequency switching time" as specified by any of the following:a.Less than 100 μs for any frequency change exceeding 2,2 GHz within the frequency range exceeding 4,8 GHz but not exceeding 31,8 GHzb.Less than 500 μs for any frequency change exceeding 550 MHz within the frequency range exceeding 31,8 GHz but not exceeding 37 GHz; orc.Less than 100 μs for any frequency change exceeding 2,2 GHz within the frequency range exceeding 37 GHz but not exceeding 90 GHz;	3A002.d.
IX.A3.034	Network analysers having any of the following:1.An output power exceeding 31,62 mW (15 dBm) anywhere within the operating frequency range exceeding 43,5 GHz but not exceeding 90 GHz;2.An output power exceeding 1 mW (0 dBm) anywhere within the operating frequency range exceeding 90 GHz but not exceeding 110 GHz;3."Non-linear vector measurement functionality" at frequencies exceeding 50 GHz but not exceeding 110 GHz; or4.A maximum operating frequency exceeding 110 GHz;Technical note: "Non-linear vector measurement functionality" is an instrument's ability to analyse the test results of devices driven into the large-signal domain or the non-linear distortion range.	3A002.e.
IX.A3.035	Microwave test receivers having all of the following;1.A maximum operating frequency exceeding 110 GHz; and2.Being capable of measuring amplitude and phase simultaneously;	3A002.f.
IX.A3.036	Atomic frequency standards being any of the following:1."Space-qualified";2.Non-rubidium and having a long-term stability less (better) than 1 × 10– 11/month; or3.Non-"space-qualified" and having all of the following:a.Being a rubidium standard;b.Long-term stability less (better) than 1 × 10– 11/month; andc.Total power consumption of less than 1 Watt.	3A002.f.
IX.A3.037	Equipment for the manufacturing of semiconductor devices or materials, as follows and specially designed components and accessories therefor:(a)Equipment designed for ion implantation and having any of the following:1.Being designed and optimized to operate at a beam energy of 20 keV or more and a beam current of 10 mA or more for hydrogen, deuterium or helium implant;2.Direct write capability;3.A beam energy of 65 keV or more and a beam current of 45 mA or more for high-energy oxygen implant into a heated semiconductor material "substrate"; or4.Being designed and optimized to operate at a beam energy of 20 keV or more and a beam current of 10 mA or more for silicon implant into a semiconductor material "substrate" heated to 600 °C or greater;(b)Lithography equipment as follows and imprint lithography equipment capable of producing features of 45 nm or less:1.Align and expose step and repeat (direct step on wafer) or step and scan (scanner) equipment for wafer processing using photo-optical or X-ray methods and having any of the following:a.A light source wavelength shorter than 193 nm; orb.Capable of producing a pattern with a "Minimum Resolvable Feature size" (MRF) of 45 nm or less;Technical note: The "Minimum Resolvable Feature size" (MRF) is calculated by the following formula:where the K factor = 0,35(c)Equipment specially designed for mask using deflected focused electron beam, ion beam or "laser" beam;	3B001.b.3B001.f.3B001.f.
IX.A3.038	Equipment designed for device processing using direct writing methods;Masks and reticles, designed for integrated circuits.	3B001.g.
IX.A3.038	Test equipment specially designed for testing finished or unfinished semiconductor and microwave devices as follows and specially designed components and accessories therefor:(a)For testing S-parameters of transistor devices at frequencies exceeding 31,8 GHz;(b)For testing microwave integrated circuits specified above.	3B002
IX.A3.039	Hetero-epitaxial materials consisting of a "substrate" having stacked epitaxially grown multiple layers with any of the following:(a)Silicon (Si);(b)Germanium (Ge);(c)Silicon Carbide (SiC); or(d)"III/V compounds" of gallium or indium.Note: This item does not apply to a "substrate" having one or more P-type epitaxial layers of GaN, InGaN, AlGaN, InAlN, InAlGaN, GaP, GaAs, AlGaAs, InP, InGaP, AlInP or InGaAlP, independent of the sequence of the elements, except if the P-type epitaxial layer is between N-type layers.	3C001
IX.A3.040	Resist materials as follows and "substrates" coated with the following resists:(a)Resists designed for semiconductor lithography as follows:1.Positive resists adjusted (optimized) for use at wavelengths less than 245 nm but equal to or greater than 15 nm;2.Resists adjusted (optimized) for use at wavelengths less than 15 nm but greater than 1 nm;(b)All resists designed for use with electron beams or ion beams, with a sensitivity of 0,01 μcoulomb/mm2 or better;(c)All resists optimized for surface imaging technologies;(d)All resists designed or optimized for use with imprint lithography equipment capable of producing features of 45 nm or less that use either a thermal or photo-curable process.	3C002
IX.A3.041	Organo-inorganic compounds:(a)Organo-metallic compounds of aluminium, gallium or indium, having a purity (metal basis) better than 99,999 %;(b)Organo-arsenic, organo-antimony and organo-phosphorus compounds, having a purity (inorganic element basis) better than 99,999 %.	3C003
IX.A3.042	Hydrides of phosphorus, arsenic or antimony, having a purity better than 99,999 %, even diluted in inert gases or hydrogen.Note: The item above does not apply to hydrides containing 20 % molar or more of inert gases or hydrogen.	3C004
IX.A3.043	Silicon carbide (SiC), gallium nitride (GaN), aluminium nitride (AlN) or aluminium gallium nitride (AlGaN) semiconductor "substrates", or ingots, boules or other preforms of those materials, having resistivities greater than 10000 ohm-cm at 20 °C.	3C005
IX.A3.044	"Substrates" specified in item 5 above with at least one epitaxial layer of silicon carbide, gallium nitride, aluminium nitride or aluminium gallium nitride.	3C006

IX.A6.SENSORS AND LASERS

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
IX.A6.001	Optical sensors or equipment and components therefor, as follows:(a)Special support components for optical sensors, as follows:1."Space-qualified" cryocoolers;	6A002.d.
IX.A6.002	Non-"space-qualified" cryocoolers having a cooling source temperature below 218 K (– 55 °C), as follows:(a)Closed cycle type with a specified Mean-Time-To-Failure (MTTF) or Mean-Time-Between-Failures (MTBF), exceeding 2500 hours;(b)Joule-Thomson (JT) self-regulating minicoolers having bore (outside) diameters of less than 8 mm;	6A002.d.
IX.A6.003	Optical sensing fibres specially fabricated either compositionally or structurally, or modified by coating, to be acoustically, thermally, inertially, electromagnetically or nuclear radiation sensitive.	6A002.d.
IX.A6.004	Cameras, systems or equipment, and components therefor, as follows:(a)Instrumentation cameras and specially designed components therefor, as follows:Note: Instrumentation cameras, specified above, with modular structures should be evaluated by their maximum capability, using plug-ins available according to the camera manufacturer's specifications.	6A003
IX.A6.005	High-speed cinema recording cameras using any film format from 8 mm to 16 mm inclusive, in which the film is continuously advanced throughout the recording period, and that are capable of recording at framing rates exceeding 13150 frames/s;Note: The item above does not apply to cinema recording cameras designed for civil purposes.2.Mechanical high-speed cameras, in which the film does not move, capable of recording at rates exceeding 1000000 frames/s for the full framing height of 35 mm film, or at proportionately higher rates for lesser frame heights, or at proportionately lower rates for greater frame heights;3.Mechanical or electronic streak cameras as follows:a.Mechanical streak cameras having writing speeds exceeding 10 mm/μs;b.Electronic streak cameras having temporal resolution better than 50 ns;4.Electronic framing cameras having a speed exceeding 1000000 frames/s;5.Electronic cameras having all of the following:a.An electronic shutter speed (gating capability) of less than 1 μs per full frame; andb.A read-out time allowing a framing rate of more than 125 full frames per second;6.Plug-ins having all of the following characteristics:a.Specially designed for instrumentation cameras which have modular structures and which are specified in this item; andb.Enabling these cameras to meet the characteristics specified above, according to the manufacturer's specifications;	6A003
IX.A6.006	Imaging cameras, as follows:Note: The item above does not apply to television or video cameras, specially designed for television broadcasting.1.Video cameras incorporating solid-state sensors, having a peak response in the wavelength range exceeding 10 nm, but not exceeding 30000 nm and having all of the following:a.Having any of the following:1.More than 4 × 106 "active pixels" per solid-state array for monochrome (black and white) cameras;2.More than 4 × 106 "active pixels" per solid-state array for colour cameras incorporating three solid-state arrays; or3.More than 12 × 106 "active pixels" for solid-state array colour cameras incorporating one solid-state array; andb.Having any of the following:1.Optical mirrors specified below;2.Optical control equipment specified below; or3.The capability for annotating internally generated "camera tracking data";Technical notes:1.For the purposes of this entry, digital video cameras should be evaluated by the maximum number of "active pixels" used for capturing moving images.2.For the purposes of this entry, "camera tracking data" is the information necessary to define camera line of sight orientation with respect to the Earth. This includes: (a) the horizontal angle the camera line of sight makes with respect to the Earth's magnetic field direction; and (b) the vertical angle between the camera line of sight and the Earth's horizon.	6A003
IX.A6.007	Scanning cameras and scanning camera systems;a.A peak response in the wavelength range exceeding 10 nm, but not exceeding 30000 nm;b.Linear detector arrays with more than 8192 elements per array; andc.Mechanical scanning in one direction;Note: The item above does not apply to scanning cameras and scanning camera systems, specially designed for any of the following:(a)Industrial or civilian photocopiers;(b)Image scanners specially designed for civil, stationary, close proximity scanning applications (e.g., reproduction of images or print contained in documents, artwork or photographs); or(c)Medical equipment.	6A003
IX.A6.008	Imaging cameras incorporating image intensifier tubes having any of the following:a.Having all of the following:1.A peak response in the wavelength range exceeding 400 nm but not exceeding 1050 nm;2.Electron image amplification using any of the following:a.A microchannel plate with a hole pitch (centre-to-centre spacing) of 12 μm or less; orb.An electron sensing device with a non-binned pixel pitch of 500 μm or less, specially designed or modified to achieve "charge multiplication" other than by a microchannel plate; and3.Any of the following photocathodes:a.Multialkali photocathodes (e.g., S-20 and S-25) having a luminous sensitivity exceeding 350 μA/lm;b.GaAs or GaInAs photocathodes; orc.Other "III/V compound" semiconductor photocathodes having a maximum "radiant sensitivity" exceeding 10 mA/W; orb.Having all of the following:1.A peak response in the wavelength range exceeding 1050 nm but not exceeding 1800 nm;2.Electron image amplification using any of the following:a.A microchannel plate with a hole pitch (centre-to-centre spacing) of 12 μm or less; orb.An electron sensing device with a non-binned pixel pitch of 500 μm or less, specially designed or modified to achieve "charge multiplication" other than by a microchannel plate; and3."III/V compound" semiconductor (e.g., GaAs or GaInAs) photocathodes and transferred electron photocathodes, having a maximum "radiant sensitivity" exceeding 15 mA/W;	6A003
IX.A6.009	Imaging cameras incorporating "focal plane arrays" having any of the following:a.Incorporating non-"space-qualified" "focal plane arrays" having any of the following:1.Having all of the following:a.Individual elements with a peak response within the wavelength range exceeding 900 nm but not exceeding 1050 nm; andb.Any of the following:1.A response "time constant" of less than 0,5 ns; or2.Specially designed or modified to achieve "charge multiplication" and having a maximum "radiant sensitivity" exceeding 10 mA/W;2.Having all of the following:a.Individual elements with a peak response in the wavelength range exceeding 1050 nm but not exceeding 1200 nm; andb.Any of the following:1.A response "time constant" of 95 ns or less; or2.Specially designed or modified to achieve "charge multiplication" and having a maximum "radiant sensitivity" exceeding 10 mA/W; or3.Being non-"space-qualified" non-linear (two-dimensional) "focal plane arrays" having individual elements with a peak response in the wavelength range exceeding 1200 nm but not exceeding 30000 nm;4.Being non-"space-qualified" linear (one-dimensional) "focal plane arrays" having all of the following:a.Individual elements with a peak response in the wavelength range exceeding 1200 nm but not exceeding 3000 nm; andb.Any of the following:1.A ratio of "scan direction" dimension of the detector element to the "cross-scan direction" dimension of the detector element of less than 3,8; or2.Signal processing in the detector elements; or5.Being non-"space-qualified" linear (one-dimensional) "focal plane arrays" having individual elements with a peak response in the wavelength range exceeding 3000 nm but not exceeding 30000 nm;b.Incorporating non-"space-qualified" non-linear (two-dimensional) infrared "focal plane arrays" based on "microbolometer" material having individual elements with an unfiltered response in the wavelength range equal to or exceeding 8000 nm but not exceeding 14000 nm; orc.Incorporating non-"space-qualified" "focal plane arrays" having all of the following:1.Individual detector elements with a peak response in the wavelength range exceeding 400 nm but not exceeding 900 nm;2.Specially designed or modified to achieve "charge multiplication" and having a maximum "radiant sensitivity" exceeding 10 mA/W for wavelengths exceeding 760 nm; and3.Greater than 32 elements.Notes:1.Imaging cameras specified in item 4 above include "focal plane arrays" combined with sufficient "signal processing" electronics, beyond the read-out integrated circuit, to enable as a minimum the output of an analogue or digital signal once power is supplied.2.Item 4.a. does not apply to imaging cameras incorporating linear "focal plane arrays" with 12 elements or fewer, not employing time-delay-and-integration within the element and designed for any of the following:(a)Industrial or civilian intrusion alarm, traffic or industrial movement control or counting systems;(b)Industrial equipment used for inspection or monitoring of heat flows in buildings, equipment or industrial processes;(c)Industrial equipment used for inspection, sorting or analysis of the properties of materials;(d)Equipment specially designed for laboratory use; or(e)Medical equipment.3.Item 4.b. does not apply to imaging cameras having any of the following:(a)A maximum frame rate equal to or less than 9 Hz;(b)Having all of the following:1.Having a minimum horizontal or vertical "Instantaneous Field of View (IFOV)" of at least 10 mrad (milliradians);2.Incorporating a fixed focal-length lens that is not designed to be removed;3.Not incorporating a "direct view" display; andTechnical note:"Direct view" refers to an imaging camera operating in the infrared spectrum that presents a visual image to a human observer using a near-to-eye microdisplay incorporating any light-security mechanism.4.Having any of the following:a.No facility to obtain a viewable image of the detected field of view; orb.The camera is designed for a single kind of application and designed not to be user modified; orTechnical note:"Instantaneous Field of View (IFOV)" specified in note 3.b. is the lesser figure of the "Horizontal IFOV" or the "Vertical IFOV"."Horizontal IFOV" = horizontal Field of View (FOV)/number of horizontal detector elements."Vertical IFOV" = vertical Field of View (FOV)/number of vertical detector elements.(c)The camera is specially designed for installation into a civilian passenger land vehicle and having all of the following:1.The placement and configuration of the camera within the vehicle are solely to assist the driver in the safe operation of the vehicle.	6A003
IX.A6.010	Optical mirrors (reflectors), as follows:1."Deformable mirrors" having an active optical aperture greater than 10 mm and having any of the following, and specially designed components therefor:a.Having all the following:1.A mechanical resonant frequency of 750 Hz or more; and2.More than 200 actuators; orb.A Laser Induced Damage Threshold (LIDT) being any of the following:1.Greater than 1 kW/cm2 using a "CW laser"; or2.Greater than 2 J/cm2 using 20 ns "laser" pulses at 20 Hz repetition rate;2.Lightweight monolithic mirrors having an average "equivalent density" of less than 30 kg/m2 and a total mass exceeding 10 kg;3.Lightweight "composite" or foam mirror structures having an average "equivalent density" of less than 30 kg/m2 and a total mass exceeding 2 kg;Note: Items 2 and 3 above do not apply to mirrors specially designed to direct solar radiation for terrestrial heliostat installations.	6A004.a.
IX.A6.011	Mirrors specially designed for beam steering mirror stages with a flatness of λ/10 or better (λ is equal to 633 nm) and having any of the following:a.Diameter or major axis length greater than or equal to 100 mm; orb.Having all of the following:1.Diameter or major axis length greater than 50 mm but less than 100 mm; and2.A Laser Induced Damage Threshold (LIDT) being any of the following:a.Greater than 10 kW/cm2 using a "CW laser"; orb.Greater than 20 J/cm2 using 20 ns "laser" pulses at 20 Hz repetition rate;	6A004.b.
IX.A6.012	Optical components made from zinc selenide (ZnSe) or zinc sulphide (ZnS) with transmission in the wavelength range exceeding 3000 nm but not exceeding 25000 nm and having any of the following:1.Exceeding 100 cm3 in volume; or2.Exceeding 80 mm in diameter or length of major axis and 20 mm in thickness (depth);(c)"Space-qualified" components for optical systems, as follows:1.Components lightweighted to less than 20 % "equivalent density" compared with a solid blank of the same aperture and thickness;2.Raw substrates, processed substrates having surface coatings (single-layer or multi-layer, metallic or dielectric, conducting, semiconducting or insulating) or having protective films;3.Segments or assemblies of mirrors designed to be assembled in space into an optical system with a collecting aperture equivalent to or larger than a single optic 1 m in diameter;4.Components manufactured from "composite" materials having a coefficient of linear thermal expansion equal to or less than 5 × 10– 6 in any coordinate direction.	6A004.c.
IX.A6.013	Non-"tunable" continuous-wave "(CW) lasers" having any of the following:1.Output wavelength less than 150 nm and output power exceeding 1 W;2.Output wavelength of 150 nm or more but not exceeding 510 nm and output power exceeding 30 W;Note: Item 2 above does not apply to Argon "lasers" having an output power equal to or less than 50 W.3.Output wavelength exceeding 510 nm but not exceeding 540 nm and any of the following:a.Single transverse mode output and output power exceeding 50 W; orb.Multiple transverse mode output and output power exceeding 150 W;4.Output wavelength exceeding 540 nm but not exceeding 800 nm and output power exceeding 30 W;5.Output wavelength exceeding 800 nm but not exceeding 975 nm and any of the following:a.Single transverse mode output and output power exceeding 50 W; orb.Multiple transverse mode output and output power exceeding 80 W;6.Output wavelength exceeding 975 nm but not exceeding 1150 nm and any of the following:a.Single transverse mode and output power exceeding 500 W; orb.Multiple transverse mode output and any of the following:1."Wall-plug efficiency" exceeding 18 % and output power exceeding 500 W; or2.Output power exceeding 2 kW;Notes:1.Item b. above does not apply to multiple transverse mode, industrial "lasers" with output power exceeding 2 kW and not exceeding 6 kW with a total mass greater than 1200 kg. For the purposes of this note, total mass includes all components required to operate the "laser", e.g., "laser", power supply, heat exchanger, but excludes external optics for beam conditioning and/or delivery.2.Item b. above does not apply to multiple transverse mode, industrial "lasers" having any of the following:(a)Output power exceeding 500 W but not exceeding 1 kW and having all of the following:1.Beam Parameter Product (BPP) exceeding 0,7 mm · mrad; and2."Brightness" not exceeding 1024 W/(mm · mrad)2;(b)Output power exceeding 1 kW but not exceeding 1,6 kW and having a BPP exceeding 1,25 mm · mrad;(c)Output power exceeding 1,6 kW but not exceeding 2,5 kW and having a BPP exceeding 1,7 mm · mrad;(d)Output power exceeding 2,5 kW but not exceeding 3,3 kW and having a BPP exceeding 2,5 mm · mrad;(e)Output power exceeding 3,3 kW but not exceeding 4 kW and having a BPP exceeding 3,5 mm · mrad;(f)Output power exceeding 4 kW but not exceeding 5 kW and having a BPP exceeding 5 mm · mrad;(g)Output power exceeding 5 kW but not exceeding 6 kW and having a BPP exceeding 7,2 mm · mrad;(h)Output power exceeding 6 kW but not exceeding 8 kW and having a BPP exceeding 12 mm · mrad; or(i)Output power exceeding 8 kW but not exceeding 10 kW and having a BPP exceeding 24 mm · mrad;Technical note:For the purposes of note 2.a., "brightness" is defined as the output power of the "laser" divided by the squared Beam Parameter Product (BPP), i.e., (output power)/BPP2.	6A005.a.1.6A005.a.2.6A005.a.36A005.a.4.6A005.a.5.6A005.a.6.
IX.A6.014	"Tunable" "lasers" having any of the following:1.Output wavelength less than 600 nm and any of the following:a.Output energy exceeding 50 mJ per pulse and "peak power" exceeding 1 W; orb.Average or CW output power exceeding 1 W;Note: Item 1. above does not apply to dye "lasers" or other liquid "lasers", having a multimode output and a wavelength of 150 nm or more but not exceeding 600 nm and all of the following:1.Output energy less than 1,5 J per pulse or a "peak power" less than 20 W; and2.Average or CW output power less than 20 W.2.Output wavelength of 600 nm or more but not exceeding 1400 nm, and any of the following:a.Output energy exceeding 1 J per pulse and "peak power" exceeding 20 W; orb.Average or CW output power exceeding 20 W; or3.Output wavelength exceeding 1400 nm and any of the following:a.Output energy exceeding 50 mJ per pulse and "peak power" exceeding 1 W; orb.Average or CW output power exceeding 1 W;	6A005.c.
IX.A6.015	Other semiconductor "lasers", as follows:Notes:1.Includes semiconductor "lasers" having optical output connectors (e.g., fibre-optic pigtails).2.The status of semiconductor "lasers" specially designed for other equipment is determined by the status of the other equipment.a.Individual single-transverse mode semiconductor "lasers" having any of the following:1.Wavelength equal to or less than 1510 nm and average or CW output power, exceeding 1,5 W; or2.Wavelength greater than 1510 nm and average or CW output power, exceeding 500 mW;b.Individual, multiple-transverse mode semiconductor "lasers" having any of the following:1.Wavelength of less than 1400 nm and average or CW output power, exceeding 15 W;2.Wavelength equal to or greater than 1400 nm and less than 1900 nm and average or CW output power, exceeding 2,5 W; or3.Wavelength equal to or greater than 1900 nm and average or CW output power, exceeding 1 W;c.Individual semiconductor "laser" "bars" having any of the following:1.Wavelength of less than 1400 nm and average or CW output power, exceeding 100 W;2.Wavelength equal to or greater than 1400 nm and less than 1900 nm and average or CW output power, exceeding 25 W; or3.Wavelength equal to or greater than 1900 nm and average or CW output power, exceeding 10 W;d.Semiconductor "laser" "stacked arrays" (two-dimensional arrays) having any of the following:1.Wavelength less than 1400 nm and having any of the following:a.Average or CW total output power less than 3 kW and having average or CW output "power density" greater than 500 W/cm2;b.Average or CW total output power equal to or exceeding 3 kW but less than or equal to 5 kW, and having average or CW output "power density" greater than 350W/cm2;c.Average or CW total output power exceeding 5 kW;d.Peak pulsed "power density" exceeding 2500 W/cm2; orNote: Item d. does not apply to epitaxially fabricated monolithic devices.e.Spatially coherent average or CW total output power, greater than 150 W;2.Wavelength greater than or equal to 1400 nm but less than 1900 nm, and having any of the following:a.Average or CW total output power less than 250 W and average or CW output "power density" greater than 150 W/cm2;b.Average or CW total output power equal to or exceeding 250 W but less than or equal to 500 W, and having average or CW output "power density" greater than 50W/cm2;c.Average or CW total output power exceeding 500 W;d.Peak pulsed "power density" exceeding 500 W/cm2; orNote: Item d. does not apply to epitaxially fabricated monolithic devices.e.Spatially coherent average or CW total output power, exceeding 15 W;3.Wavelength greater than or equal to 1900 nm and having any of the following:a.Average or CW output "power density" greater than 50 W/cm2;b.Average or CW output power greater than 10 W; orc.Spatially coherent average or CW total output power, exceeding 1,5W; or4.At least one "laser" "bar" specified above;Technical note:For the purposes of this category "power density" means the total "laser" output power divided by the emitter surface area of the "stacked array".	6A005.d.1
IX.A6.016	"Chemical lasers", as follows:a.Hydrogen Fluoride (HF) "lasers";b.Deuterium Fluoride (DF) "lasers";c."Transfer lasers", as follows:1.Oxygen Iodine (O2-I) "lasers";2.Deuterium Fluoride-Carbon dioxide (DF-CO2) "lasers";3."Non-repetitive pulsed" Nd: glass "lasers" having any of the following:a."Pulse duration" not exceeding 1 μs and output energy exceeding 50 J per pulse; orb."Pulse duration" exceeding 1 μs and output energy exceeding 100 J per pulse;	6A005.d.5
IX.A6.017	Components, as follows:1.Mirrors cooled either by "active cooling" or by heat pipe cooling;Technical note:"Active cooling" is a cooling technique for optical components using flowing fluids within the subsurface (nominally less than 1 mm below the optical surface) of the optical component to remove heat from the optic.2.Optical mirrors or transmissive or partially transmissive optical or electro-optical components, other than fused tapered fibre combiners and Multi-Layer Dielectric gratings (MLDs), specially designed for use with specified "lasers";3.Fibre "laser" components:a.Multimode to multimode fused tapered fibre combiners having all of the following:1.An insertion loss better (less) than or equal to 0,3 dB maintained at a rated total average or CW output power (excluding output power transmitted through the single mode core if present) exceeding 1000 W; and2.Number of input fibres equal to or greater than 3;b.Single-mode to multimode fused tapered fibre combiners having all of the following:1.An insertion loss better (less) than 0,5 dB maintained at a rated total average or CW output power exceeding 4600 W;2.Number of input fibres equal to or greater than 3; and3.Having any of the following:a.A Beam Parameter Product (BPP) measured at the output not exceeding 1,5 mm mrad for a number of input fibres less than or equal to 5; orb.A BPP measured at the output not exceeding 2,5 mm mrad for a number of input fibres greater than 5;c.MLDs having all of the following:1.Designed for spectral or coherent beam combination of 5 or more fibre "lasers"; and2.CW "Laser" Induced Damage Threshold (LIDT) greater than or equal to 10 kW/cm2.	6A005.e.
IX.A6.018	Gravity meters (gravimeters) and gravity gradiometers, as follows:(a)Gravity meters designed or modified for ground use and having a static "accuracy" of less (better) than 10 μGal;Note: Item (a) does not apply to ground gravity meters of the quartz element (Worden) type.(b)Gravity meters designed for mobile platforms and having all of the following:1.A static "accuracy" of less (better) than 0,7 mGal; and2.An in-service (operational) "accuracy" of less (better) than 0,7 mGal having a "time-to-steady-state registration" of less than 2 minutes under any combination of attendant corrective compensations and motional influences;Technical note: For the purposes of item (b), "time-to-steady-state registration" (also referred to as the gravimeter's response time) is the time over which the disturbing effects of platform-induced accelerations (high-frequency noise) are reduced.(c)Gravity gradiometers.	6A007
IX.A6.019	1.Radar systems, equipment and assemblies, having any of the following, and specially designed components therefor:Note: This section does not apply to:Secondary Surveillance Radar (SSR);Civil Automotive Radar;Displays or monitors used for Air Traffic Control (ATC);Meteorological (weather) Radar;Precision Approach Radar (PAR) equipment conforming to International Civil Aviation Organization (ICAO) standards and employing electronically steerable linear (one-dimensional) arrays or mechanically positioned passive antennae.(a)Operating at frequencies from 40 GHz to 230 GHz and having any of the following:1.An average output power exceeding 100 mW; or2.Locating "accuracy" of 1 m or less (better) in range and 0,2 degree or less (better) in azimuth;(b)A tunable bandwidth exceeding ± 6,25 % of the "centre operating frequency";Technical note:The "centre operating frequency" equals one half of the sum of the highest plus the lowest specified operating frequencies.(c)Capable of operating simultaneously on more than two carrier frequencies;(d)Capable of operating in synthetic aperture radar (SAR), inverse synthetic aperture radar (ISAR) or side-looking airborne radar (SLAR) mode;(e)Incorporating electronically steerable array antennae;(f)Capable of height-finding non-cooperative targets;(g)Specially designed for airborne (balloon or airframe mounted) operation and having Doppler "signal processing" for the detection of moving targets;(h)Employing processing of radar signals and using any of the following:1."Radar spread spectrum" techniques; or2."Radar frequency agility" techniques;(i)Providing ground-based operation with a maximum "instrumented range" exceeding 185 km;Note: Item (i) above does not apply to:(a)Fishing ground surveillance radar;(b)Ground radar equipment specially designed for en-route air traffic control and having all of the following:1.A maximum "instrumented range" of 500 km or less;2.Configured so that radar target data can be transmitted only one way from the radar site to one or more civil ATC centres;3.Contains no provisions for remote control of the radar scan rate from the en-route ATC centre; and4.Permanently installed.(c)Weather balloon tracking radars.(j)Being "laser" radar or Light Detection and Ranging (LIDAR) equipment and having any of the following:1."Space-qualified";2.Employing coherent heterodyne or homodyne detection techniques and having an angular resolution of less (better) than 20 μrad (microradians); or3.Designed for carrying out airborne bathymetric littoral surveys to International Hydrographic Organization (IHO) Order 1a Standard (5th Edition, February 2008) for Hydrographic Surveys or better, and using one or more "lasers" with a wavelength exceeding 400 nm but not exceeding 600 nm;Notes:1.LIDAR equipment specially designed for surveying is only specified by 3.2.The item above does not apply to LIDAR equipment specially designed for meteorological observation.3.Parameters in the IHO Order 1a Standard (5th Edition, February 2008) are summarized as follows:Horizontal Accuracy (95 % confidence level) = 5 m + 5 % of depth.Depth Accuracy for Reduced Depths (95 % confidence level) = ± √(a2+ (b * d)2) where:a = 0,5 m = constant-depth error, i.e., the sum of all constant-depth errorsb = 0,013 = factor of depth-dependent errorb * d = depth-dependent error, i.e., the sum of all depth-dependent errorsd = depthFeature Detection = Cubic features > 2 m in depths up to 40 m; 10 % of depth beyond 40 m.(k)Having "signal processing" subsystems using "pulse compression" and having any of the following:1.A "pulse compression" ratio exceeding 150; or2.A compressed pulse width of less than 200 ns; orNote: Item 2. above does not apply to two-dimensional "marine radar" or "vessel traffic service" radar, having all of the following:(a)"Pulse compression" ratio not exceeding 150;(b)Compressed pulse width of greater than 30 ns;(c)Single and rotating mechanically scanned antenna;(d)Peak output power not exceeding 250 W; and(e)Not capable of "frequency hopping".(l)Having data processing subsystems and having any of the following:1."Automatic target tracking" providing, at any antenna rotation, the predicted target position beyond the time of the next antenna beam passage; orNote: The item above does not apply to conflict alert capability in ATC systems, or "marine radar".2.Configured to provide superposition and correlation, or fusion, of target data within six seconds from two or more "geographically dispersed" radar sensors to improve the aggregate performance beyond that of any single sensor specified in items (f) or (i).Note: The item above does not apply to systems, equipment and assemblies used for "vessel traffic services".Technical notes:1.For the purposes of this section, "marine radar" is a radar that is used to navigate safely at sea, in inland waterways or in near-shore environments.2.For the purposes of this section, "vessel traffic service" is a vessel traffic monitoring and control service similar to air traffic control for "aircraft".	6A008
IX.A6.020	Optical equipment, as follows:(a)Equipment for measuring absolute reflectance to an "accuracy" of equal to or better than 0,1 % of the reflectance value;(b)Equipment other than optical surface scattering measurement equipment, having an unobscured aperture of more than 10 cm, specially designed for the non-contact optical measurement of a non-planar optical surface figure (profile) to an "accuracy" of 2 nm or less (better) against the required profile.Note: The item above does not apply to microscopes.	6B004
IX.A6.021	Equipment to produce, align and calibrate land-based gravity meters with a static "accuracy" of better than 0,1 mGal.	6B007
IX.A6.022	Pulse radar cross-section measurement systems having transmit pulse widths of 100 ns or less, and specially designed components therefor.	6B008
IX.A6.023	Optical sensor materials, as follows:(a)Elemental tellurium (Te) of purity levels of 99,9995 % or more;(b)Single crystals (including epitaxial wafers) of any of the following:1.Cadmium zinc telluride (CdZnTe) with zinc content of less than 6 % by "mole fraction";2.Cadmium telluride (CdTe) of any purity level; or3.Mercury cadmium telluride (HgCdTe) of any purity level.Technical note:"Mole fraction" is defined as the ratio of moles of ZnTe to the sum of the moles of CdTe and ZnTe present in the crystal.	6C002
IX.A6.024	Optical materials, as follows:(a)Zinc selenide (ZnSe) and zinc sulphide (ZnS) "substrate blanks", produced by the chemical vapour deposition process and having any of the following:1.A volume greater than 100 cm3; or2.A diameter greater than 80 mm and a thickness of 20 mm or more;(b)Electro-optic materials and non-linear optical materials, as follows:1.Potassium titanyl arsenate (KTA) (CAS 59400-80-5);2.Silver gallium selenide (AgGaSe2, also known as AGSE) (CAS 12002-67-4);3.Thallium arsenic selenide (Tl3AsSe3, also known as TAS) (CAS 16142-89-5);4.Zinc germanium phosphide (ZnGeP2, also known as ZGP, zinc germanium biphosphide or zinc germanium diphosphide); or5.Gallium selenide (GaSe) (CAS 12024-11-2);	6C004.a.6C004.b.
IX.A6.025	"Substrate blanks" of silicon carbide or beryllium beryllium (Be/Be) deposited materials, exceeding 300 mm in diameter or major axis length;	6C004.d.
IX.A6.026	Glass, including fused silica, phosphate glass, fluorophosphate glass, zirconium fluoride (ZrF4) (CAS 7783-64-4) and hafnium fluoride (HfF4) (CAS 13709-52-9) and having all of the following:1.A hydroxyl ion (OH–) concentration of less than 5 ppm;2.Integrated metallic purity levels of less than 1 ppm; and3.High homogeneity (index of refraction variance) less than 5 × 10– 6;(e)Synthetically produced diamond material with an absorption of less than 10– 5 cm– 1 for wavelengths exceeding 200 nm but not exceeding 14000 nm.	6C004.e.
IX.A6.027	"Laser" materials, as follows:(a)Synthetic crystalline "laser" host material in unfinished form as follows:1.Titanium doped sapphire;(b)Rare-earth-metal doped double-clad fibres;1.Nominal "laser" wavelength of 975 nm to 1150 nm and having all of the following:a.Average core diameter equal to or greater than 25 μm; andb.Core "Numerical Aperture" ("NA") less than 0,065; orNote: The item above does not apply to double-clad fibres having an inner glass cladding diameter exceeding 150 μm and not exceeding 300 μm.2.Nominal "laser" wavelength exceeding 1530 nm and having all of the following:a.Average core diameter equal to or greater than 20 μm; andb.Core "NA" less than 0,1.Technical notes:1.For the purposes of the item above, the core "Numerical Aperture" ("NA") is measured at the emission wavelengths of the fibre.2.Item (b) above includes fibres assembled with end caps.	6C005

IX.A7.NAVIGATION AND AVIONICS

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
IX.A7.001	"Star trackers" and components therefor, as follows:(a)"Star trackers" with a specified azimuth "accuracy" of equal to or less (better) than 20 seconds of arc throughout the specified lifetime of the equipment;(b)Components specially designed for equipment specified in item (a), as follows:1.Optical heads or baffles;2.Data processing units.Technical note:"Star trackers" are also referred to as stellar attitude sensors or gyro-astro compasses.	7A004
IX.A7.002	Global Navigation Satellite Systems (GNSS) receiving equipment having any of the following and specially designed components therefor:(a)Employing a decryption algorithm specially designed or modified for government use to access the ranging code for position and time; or(b)Employing "adaptive antenna systems".Note: Item (b) does not apply to GNSS receiving equipment that only uses components designed to filter, switch or combine signals from multiple omni-directional antennae that do not implement adaptive antenna techniques.Technical note:For the purposes of item (b), "adaptive antenna systems" dynamically generate one or more spatial nulls in an antenna array pattern by signal processing in the time domain or frequency domain.	7A005
IX.A7.003	Airborne altimeters operating at frequencies other than 4,2 to 4,4 GHz inclusive and having any of the following:(a)"Power management"; or(b)Using phase shift key modulation.	7A006
IX.A7.004	Test, calibration or alignment equipment, specially designed for equipment specified in the section above.	7B001
IX.A7.005	Equipment specially designed to characterize mirrors for ring "laser" gyros, as follows:(a)Scatterometers having a measurement "accuracy" of 10 ppm or less (better);(b)Profilometers having a measurement "accuracy" of 0,5 nm (5 angstrom) or less (better).	7B002
IX.A7.006	Equipment specially designed for the "production" of equipment specified IN IX.A7.Note: Including:Gyro tuning test stations;Gyro dynamic balance stations;Gyro run-in/motor test stations;Gyro evacuation and fill stations;Centrifuge fixtures for gyro bearings;Accelerometer axis align stations;Fibre-optic gyro coil winding machines.	7B003

IX.A8.MARINE

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
IX.A8.001	Systems, equipment and components, specially designed or modified for submersible vehicles and designed to operate at depths exceeding 1000 m, as follows:1.Pressure housings or pressure hulls with a maximum inside chamber diameter exceeding 1,5 m;2.Direct current propulsion motors or thrusters;3.Umbilical cables, and connectors therefor, using optical fibre and having synthetic strength members;4.Components manufactured from material as follows: "Syntactic foam" designed for underwater use and having all of the following:a.Designed for marine depths exceeding 1000 m; andb.A density less than 561 kg/m3;	8A002.a.
IX.A8.002	Systems specially designed or modified for the automated control of the motion of submersible vehicles specified above, using navigation data, having closed loop servo-controls and having any of the following:1.Enabling a vehicle to move within 10 m of a predetermined point in the water column;2.Maintaining the position of the vehicle within 10 m of a predetermined point in the water column; or3.Maintaining the position of the vehicle within 10 m while following a cable on or under the seabed;	8A002.b.
IX.A8.003	Fibre-optic pressure hull penetrators;	8A002.c.
IX.A8.004	"Robots" specially designed for underwater use, controlled by using a dedicated computer and having any of the following:(a)Systems that control the "robot" using information from sensors which measure force or torque applied to an external object, distance to an external object, or tactile sense between the "robot" and an external object; or(b)The ability to exert a force of 250 N or more or a torque of 250 Nm or more and using titanium-based alloys or "composite" "fibrous or filamentary materials" in their structural members;	8A002.h.
IX.A8.005	Stirling cycle engine air independent power systems having all of the following:(a)Devices or enclosures, specially designed for underwater noise reduction in frequencies below 10 kHz, or special mounting devices for shock mitigation; and(b)Specially designed exhaust systems which discharge the products of combustion against a pressure of 100 kPa or more;	8A002.j.
IX.A8.006	Noise reduction systems designed for use on vessels of 1000 tonnes displacement or more, as follows:(a)Systems that attenuate underwater noise at frequencies below 500 Hz and consist of compound acoustic mounts for the acoustic isolation of diesel engines, diesel generator sets, gas turbines, gas turbine generator sets, propulsion motors or propulsion reduction gears, specially designed for sound or vibration isolation and having an intermediate mass exceeding 30 % of the equipment to be mounted;(b)"Active noise reduction or cancellation systems" or magnetic bearings, specially designed for power transmission systems.Technical note:"Active noise reduction or cancellation systems" incorporate electronic control systems capable of actively reducing equipment vibration by the generation of anti-noise or anti-vibration signals directly to the source.	8A002.j.

IX.A9.AEROSPACE AND PROPULSION

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
IX.A9.001	Aero gas turbine engines:(a)Incorporating any of the "technologies" specified in paragraph 2 of the section below entitled "Technology"; orNote 1: This item does not apply to aero gas turbine engines which meet all of the following:(a)Certified by civil aviation authorities; and(b)Intended to power non-military manned "aircraft" for which any of the following has been issued by civil aviation authorities for the "aircraft" with this specific engine type:1.A civil type certificate; or2.An equivalent document recognized by ICAO.Note 2: This item does not apply to aero gas turbine engines designed for Auxiliary Power Units (APUs) approved by the civil aviation authority of the Member State.(b)Designed to power an "aircraft" designed to cruise at Mach 1 or higher, for more than 30 minutes.	9A001
IX.A9.002	"Marine gas turbine engines" with an ISO standard continuous power rating of 24245 kW or more and a specific fuel consumption not exceeding 0,219 kg/kWh in the power range from 35 to 100 %, and specially designed assemblies and components therefor.Note: The term "marine gas turbine engines" includes those industrial, or aero-derivative, gas turbine engines adapted for a ship's electric power generation or propulsion.	9A002
IX.A9.003	Specially designed assemblies or components, incorporating any of the "technologies" specified in paragraph 2 of the section below entitled "Technology", for any of the following aero gas turbine engines:(a)Specified in item 1 above; or(b)Whose design or production origins are unknown to the manufacturer.	9A003
IX.A9.004	Space launch vehicles, "spacecraft", "spacecraft buses", "spacecraft payloads", "spacecraft" on-board systems or equipment, and terrestrial equipment, as follows:(a)Space launch vehicles;(b)"Spacecraft";(c)"Spacecraft buses";(d)"Spacecraft payloads" incorporating items specified in this list;(e)On-board systems or equipment, specially designed for "spacecraft" and having any of the following functions:1."Command and telemetry data handling";(f)Terrestrial equipment specially designed for "spacecraft", as follows:1.Telemetry and telecommand equipment;2.Simulators.	9A004
IX.A9.005	Liquid rocket propulsion systems.	9A005
IX.A9.006	Systems and components, specially designed for liquid rocket propulsion systems, as follows:(a)Cryogenic refrigerators, flightweight dewars, cryogenic heat pipes or cryogenic systems, specially designed for use in space vehicles and capable of restricting cryogenic fluid losses to less than 30 % per year;(b)Cryogenic containers or closed-cycle refrigeration systems capable of providing temperatures of 100 K (– 173 °C) or less for "aircraft" capable of sustained flight at speeds exceeding Mach 3, launch vehicles or "spacecraft";(c)Slush hydrogen storage or transfer systems;(d)High-pressure (exceeding 17,5 MPa) turbo pumps, pump components or their associated gas generator or expander cycle turbine drive systems;(e)High-pressure (exceeding 10,6 MPa) thrust chambers and nozzles therefor;(f)Propellant storage systems using the principle of capillary containment or positive expulsion (i.e., with flexible bladders);(g)Liquid propellant injectors with individual orifices of 0,381 mm or smaller in diameter (an area of 1,14 × 10– 3 cm2 or smaller for non-circular orifices) and specially designed for liquid rocket engines;(h)One-piece carbon-carbon thrust chambers or one-piece carbon-carbon exit cones, with densities exceeding 1,4 g/cm3 and tensile strengths exceeding 48 MPa	9A006
IX.A9.007	Solid rocket propulsion systems.	9A007
IX.A9.008	Components specially designed for solid rocket propulsion systems, as follows:(a)Insulation and propellant bonding systems, using liners to provide a "strong mechanical bond" or a barrier to chemical migration between the solid propellant and case insulation material;(b)Filament-wound "composite" motor cases exceeding 0,61 m in diameter or having "structural efficiency ratios (PV/W)" exceeding 25 km;Technical note:"Structural efficiency ratio (PV/W)" is the burst pressure (P) multiplied by the vessel volume (V) divided by the total pressure vessel weight (W).(c)Nozzles with thrust levels exceeding 45 kN or nozzle throat erosion rates of less than 0,075 mm/s;(d)Movable nozzle or secondary fluid injection thrust vector control systems, capable of any of the following:1.Omni-axial movement exceeding ± 5°;2.Angular vector rotations of 20°/s or more; or3.Angular vector accelerations of 40°/s2 or more.	9A008
IX.A9.009	Hybrid rocket propulsion systems.	9A009
IX.A9.010	Specially designed components, systems and structures, for launch vehicles, launch vehicle propulsion systems or "spacecraft", as follows:(a)Components and structures, specially designed for launch vehicle propulsion systems manufactured using any of the following:1."Fibrous or filamentary materials";2.Metal "matrix" "composite" materials; or3.Ceramic "matrix" "composite" materials.	9A010
IX.A9.011	"Unmanned Aerial Vehicles" ("UAVs"), unmanned "airships", related equipment and components, as follows:(a)"UAVs" or unmanned "airships", designed to have controlled flight out of the direct "natural vision" of the "operator" and having any of the following:1.Having all of the following:a.A maximum "endurance" greater than or equal to 30 minutes but less than 1 hour; andb.Designed to take off and have stable controlled flight in wind gusts equal to or exceeding 46,3 km/h (25 knots); or2.A maximum "endurance" of 1 hour or greater;Technical notes:1.For the purposes of the item above, "operator" is a person who initiates or commands the "UAV" or unmanned "airship" flight.2.For the purposes of the item above, "endurance" is to be calculated for International Standard Atmosphere (ISA) conditions (ISO 2533:1975) at sea level in zero wind.3.For the purposes of the item above, "natural vision" means unaided human sight, with or without corrective lenses.(b)Related equipment and components, as follows:1.Equipment or components, specially designed to convert a manned "aircraft" or a manned "airship" to a "UAV" or unmanned "airship", specified in item (a) above;2.Air breathing reciprocating or rotary internal combustion type engines, specially designed or modified to propel "UAVs" or unmanned "airships", at altitudes above 15240 metres (50000 feet).	9A012
IX.A9.012	On-line (real-time) control systems, instrumentation (including sensors) or automated data acquisition and processing equipment specially designed for the "development" of gas turbine engines, assemblies or components and incorporating any of the "technologies" specified in paragraph 2 (b) or 2 (c) of the section below entitled "Technology".	9B002
IX.A9.013	Equipment specially designed for the "production" or test of gas turbine brush seals designed to operate at tip speeds exceeding 335 m/s and temperatures in excess of 773 K (500 °C), and specially designed components or accessories therefor.	9B003
IX.A9.014	Tools, dies or fixtures, for the solid-state joining of "superalloy", titanium or intermetallic airfoil-to-disk combinations described in paragraph 2 of the section below entitled "Technology" for gas turbines.	9B004
IX.A9.015	On-line (real-time) control systems, instrumentation (including sensors) or automated data acquisition and processing equipment, specially designed for use in wind tunnels designed for speeds of Mach 1,2 or more.	9B005
IX.A9.016	Acoustic vibration test equipment capable of producing sound pressure levels of 160 dB or more (referenced to 20 Pa) with a rated output of 4 kW or more at a test cell temperature exceeding 1273 K (1000 °C), and specially designed quartz heaters therefor.	9B006
IX.A9.017	Equipment specially designed for inspecting the integrity of rocket motors and using Non-Destructive Test (NDT) techniques other than planar X-ray or basic physical or chemical analysis.	9B007
IX.A9.018	Direct measurement wall skin friction transducers specially designed to operate at a test flow total (stagnation) temperature exceeding 833 K (560 °C).	9B008
IX.A9.019	Tooling specially designed for producing gas turbine engine powder metallurgy rotor components having all of the following:(a)Designed to operate at stress levels of 60 % of ultimate tensile strength (UTS) or more measured at a temperature of 873 K (600 °C); and(b)Designed to operate at 873 K (600 °C) or more.Note: The item above does not specify tooling for the production of powder.	9B008
IX.A9.020	Equipment specially designed for the production of items specified by "Unmanned Aerial Vehicles" ("UAVs"), unmanned "airships" and components.	9B010

B.SOFTWARE

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
IX.B.001	"Software" specially designed or modified for the "development", "production" or "use" of equipment specified in IX.A1.	1D0011D0021D003
IX.B.002	"Software" for the "development" of material specified in IX.A1.	1D0011D0021D003
IX.B.003	"Software" specially designed or modified to enable non-listed equipment to perform the functions of any equipment specified in IX.A1.	1D0011D0021D003
IX.B.004	"Software" specially designed or modified for the "development", "production" or "use" of equipment specified in IX.A2	2D001
IX.B.005	"Software" specially designed or modified to allow non-listed equipment to function as equipment specified IX.A2	2D0032D1012D202
IX.B.006	"Software" specially designed for the "development", "production" or "use" of equipment specified in IX.A3.	3D0013D0023D003
IX.B.007	"Software" specially designed or modified to allow non-listed equipment to function as equipment specified in IX.A3	3D0013D0023D003
IX.B.008	"Software" specially designed for the "development", "production" or "use" of equipment specified in IX.A6.	6D0016D0036D0026D1026D2036D203
IX.B.009	"Software" specially designed or modified to allow non-listed equipment to function as equipment specified in IX.A6.	6D0016D0036D0026D1026D2036D203
IX.B.010	"Software" specially designed or modified for the "development", "production" or "use" of equipment specified in IX.A7.	7D0017D0027D0037D0047D0057D1027D1037D104
IX.B.011	"Software" specially designed or modified to allow non-listed equipment to function as equipment specified IX.A7.	7D0017D0027D0037D0047D0057D1027D1037D104
IX.B.012	"Source code" for the operation or maintenance of equipment specified IX.A7.	7D0017D0027D0037D0047D0057D1027D1037D104
IX.B.013	Computer-Aided Design (CAD) "software" specially designed for the "development" of "active flight control systems", helicopter multi-axis fly-by-wire or fly-by-light controllers or helicopter "circulation controlled anti-torque or circulation-controlled direction control systems".	7D0017D0027D0037D0047D0057D1027D1037D104
IX.B.014	"Software" specially designed or9modified for the "development", "production" or "use" of equipment. Specified in IX.A9.	9D0019D0029D0039D0049D0059D1019D1039D1049D105
IX.B.015	"Software" specially designed or modified to allow non-listed equipment to function as equipment specified in IX.A9.	9D0019D0029D0039D0049D0059D1019D1039D1049D105

C.TECHNOLOGY

No	Description	Related item from Annex I to Regulation (EC) No 428/2009
IX.C.001	"Technology" for the "development", "production" or "use" of equipment or "software" specified in IX.A1.	2E001
IX.C.002	"Technology" for the "development", "production" or "use" of equipment or materials specified in IX.A3	3E0013E0033E1013E1023E201
IX.C.003	"Technology" for the "development", "production" and "use" of equipment or "software", specified in IX.A7.	7E0017E0027E0037E0047D0057E1017E1027E104
IX.C.004	"Technology" for the "development", "production" or "use" of equipment or software, specified in IX.A9.	9E0019E002
IX.C.005	Other "technology", as follows:(a)"Technology" "required" for the "development" or "production" of any of the following gas turbine engine components or systems:1.Gas turbine blades, vanes or "tip shrouds", made from directionally solidified (DS) or single crystal (SC) alloys and having (in the 001 Miller Index Direction) a stress-rupture life exceeding 400 hours at 1273 K (1000 °C) at a stress of 200 MPa, based on the average property values;2.Combustors having any of the following:a."Thermally decoupled liners" designed to operate at "combustor exit temperature" exceeding 1883 K (1610 °C);b.Non-metallic liners;c.Non-metallic shells; ord.Liners designed to operate at "combustor exit temperature" exceeding 1883 K (1610 °C) and having holes that meet the parameters specified by 9E003.c.;3.Components that are any of the following:a.Manufactured from organic "composite" materials designed to operate above 588 K (315 °C);b.Manufactured from any of the following:1.Metal "matrix" "composites"; or2.Ceramic "matrix" "composites"; orc.Stators, vanes, blades, tip seals (shrouds), rotating blings, rotating blisks, or "splitter ducts", that are all of the following:1.Not specified above;2.Designed for compressors or fans; and3.Manufactured from material "fibrous or filamentary materials" with resins;4.Uncooled turbine blades, vanes or "tip-shrouds", designed to operate at a "gas path temperature" of 1373 K (1100 °C) or more;5.Cooled turbine blades, vanes, "tip-shrouds", designed to operate at a "gas path temperature" of 1693 K (1420 °C) or more;6.Airfoil-to-disk blade combinations using solid-state joining;7.Gas turbine engine components using "diffusion bonding" "technology";8."Damage tolerant" gas turbine engine rotor components using powder metallurgy materials;9.Hollow fan blades.	9E003.a.
IX.C.006	"Technology" for gas turbine engine "Full Authority Digital Engine Control (FADEC) systems", as follows:1."Development" "technology" for deriving the functional requirements for the components necessary for the "FADEC system" to regulate engine thrust or shaft power (e.g., feedback sensor time constants and accuracies, fuel valve slew rate);2."Development" or "production" "technology" for control and diagnostic components unique to the "FADEC system" and used to regulate engine thrust or shaft power;3."Development" "technology" for the control law algorithms, including "source code", unique to the "FADEC system" and used to regulate engine thrust or shaft power;Note: Item (b) above does not apply to technical data related to engine-"aircraft" integration required by civil aviation authorities of one or more Member States to be published for general airline use (e.g., installation manuals, operating instructions, instructions for continued airworthiness) or interface functions (e.g., input/output processing, airframe thrust or shaft power demand).	9E003.h.
IX.C.007	"Technology" for adjustable flow path systems designed to maintain engine stability for gas generator turbines, fan or power turbines, or propelling nozzles, as follows:1."Development" "technology" for deriving the functional requirements for the components that maintain engine stability;2."Development" or "production" "technology" for components unique to the adjustable flow path system and that maintain engine stability;3."Development" "technology" for the control law algorithms, including "source code", unique to the adjustable flow path system and that maintain engine stability	9E003.i

ANNEX IIIAviation fuel referred to in point (b) of Article 3(1)EXPLANATORY NOTEThe nomenclature codes are taken from the Combined Nomenclature as defined in Article 1(2) of Council Regulation (EEC) No 2658/87 of 23 July 1987 on the tariff and statistical nomenclature and on the Common Customs Tariff and as set out in Annex I thereto, which are valid at the time of publication of this Regulation and mutatis mutandis as amended by subsequent legislation.

Code	Description
From 27101231 till 27101259	Gasoline
27101270	Naptha-type jet fuel
27101921	Kerosene-type jet fuel
27101925	Kerosene-type rocket fuel

ANNEX IVGold, titanium ore, vanadium ore and rare earth minerals referred to in point (d) of Article 3(1)EXPLANATORY NOTEThe nomenclature codes are taken from the Combined Nomenclature as defined in Article 1(2) of Council Regulation (EEC) No 2658/87 of 23 July 1987 on the tariff and statistical nomenclature and on the Common Customs Tariff and as set out in Annex I thereto, which are valid at the time of publication of this Regulation and mutatis mutandis as amended by subsequent legislation.

Code	Description
ex 2530 90 00	Ores of the rare earth metals
ex 26 12	Monazites and other ores used solely or principally for the extraction of uranium or thorium
ex 2614 00 00	Titanium ore
ex 2615 90 00	Vanadium ore
2616 90 00 10	Gold ores and concentrates

ANNEX VCoal, iron and iron ore as referred to in point (e) of Article 3(1)EXPLANATORY NOTEThe nomenclature codes are taken from the Combined Nomenclature as defined in Article 1(2) of Council Regulation (EEC) No 2658/87 of 23 July 1987 on the tariff and statistical nomenclature and on the Common Customs Tariff and as set out in Annex I thereto, which are valid at the time of publication of this Regulation and mutatis mutandis as amended by subsequent legislation.

Code	Description
ex 26 01	Iron ore
2701	Coal; briquettes, ovoids and similar solid fuels manufactured from coal
2702	Lignite, whether or not agglomerated, excluding jet
2703	Peat (including peat litter), whether or not agglomerated
2704	Coke and semi-coke of coal, of lignite or of peat, whether or not agglomerated; retort carbon
7201	Pig iron and spiegeleisen in pigs, blocks or other primary forms
7202	Ferro-alloys
7203	Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94 %, in lumps, pellets or similar forms
7204 10 00	Waste and scrap of cast iron
ex 7204 30 00	Waste and scrap of tinned iron or steel
ex 7204 41	Other waste and scrap: Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles
ex 7204 49	Other waste and scrap: Other
ex 7204 50 00	Other waste and scrap: Remelting scrap ingot
ex 7205 10 00	Granules
ex 7205 29 00	Powders, other than of alloy steel
ex 7206 10 00	Ingots
ex 7206 90 00	Other
ex 72 07	Semi-finished products of iron or non-alloy steel
ex 72 08	Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated
ex 72 09	Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated
ex 72 10	Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated
ex 72 11	Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated
ex 72 12	Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated
ex 72 14	Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling
ex 72 15	Other bars and rods of iron or non-alloy steel
ex 72 16	Angles, shapes and sections of iron or non-alloy steel
ex 72 17	Wire of iron or non-alloy steel

ANNEX VIPetroleum products referred to in point (f) of Article 3(1)EXPLANATORY NOTEThe nomenclature codes are taken from the Combined Nomenclature as defined in Article 1(2) of Council Regulation (EEC) No 2658/87 of 23 July 1987 on the tariff and statistical nomenclature and on the Common Customs Tariff and as set out in Annex I thereto, which are valid at the time of publication of this Regulation and mutatis mutandis as amended by subsequent legislation.

	2707	Oils and other products of the distillation of high temperature coal tar; similar products in which the weight of the aromatic constituents exceeds that of the non-aromatic constituents
	2709	Petroleum oils and oils obtained from bituminous minerals, crude
	2710	Petroleum oils and oils obtained from bituminous minerals, other than crude; preparations not elsewhere specified or included, containing by weight 70 % or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations; waste oils
	2711	Petroleum gases and other gaseous hydrocarbons
	2712 10	Petroleum jelly
	2712 20	Paraffin wax containing by weight less than 0,75 % of oil
Ex	2712 90	Other
	2713	Petroleum coke, petroleum bitumen and other residues of petroleum oils or of oils obtained from bituminous minerals
Ex	2714	Bitumen and asphalt, natural; bituminous or oil-shale and tar sands; asphaltites and asphaltic rocks
Ex	2715	Bituminous mixtures based on natural asphalt, on natural bitumen, on petroleum bitumen, on mineral tar or on mineral tar pitch (for example, bituminous mastics, cut-backs)
		–Preparations containing petroleum oils or oils obtained from bituminous minerals
	3403 11	– –Preparations for the treatment of textile materials, leather, furskins or other materials
	3403 19	– –Other
		–Other
Ex	3403 91	– –Preparations for the treatment of textile materials, leather, furskins or other materials
Ex	3403 99	– –Other
		– – – – –Chemical products or preparations, predominantly composed of organic compounds, not elsewhere specified or included
Ex	3824 99 92	– – – – – –In the form of a liquid at 20 °C
Ex	3824 99 93	– – – – – –Other
Ex	3824 99 96	– – – – –Other
	3826 00 10	–Fatty-acid mono-alkyl esters, containing by volume 96,5 % or more of esters (FAMAE)
	3826 00 90	–Other

ANNEX VIICopper, nickel, silver and zinc referred to in point (g) of Article 3(1)EXPLANATORY NOTEThe nomenclature codes are taken from the Combined Nomenclature as defined in Article 1(2) of Council Regulation (EEC) No 2658/87 of 23 July 1987 on the tariff and statistical nomenclature and on the Common Customs Tariff and as set out in Annex I thereto, which are valid at the time of publication of this Regulation and mutatis mutandis as amended by subsequent legislation.Copper

	2603	Copper ores and concentrates
	74	Copper and articles thereof
	8536 90 95 30	Rivet contacts–of copper–plated with silver nickel alloy AgNi10 or with silver containing by weight 11,2 % (± 1,0 %) of tin oxide and of indium oxide taken together–with a thickness of the plating of 0,3 mm (– 0/+ 0,015mm)
ex	8538 90 99	Copper parts suitable for use solely or principally with the apparatus of heading 8535, 8536 or 8537
	8544 11	Winding wire of copper
		–Other copper electric conductors, for a voltage not exceeding 1000 V:
ex	8544 42	– –Fitted with connectors
ex	8544 49	– –Other
		–Other electric conductors, for a voltage exceeding 1000 V:
	8544 60 10	– –With copper conductors

Nickel

	2604	Nickel ores and concentrates
		Ferro-alloys:
	7202 60	–Ferro-nickel
		Wire of stainless steel:
	7223 00 11	– –Containing by weight 28 % or more but not more than 31 % of nickel and 20 % or more but not more than 22 % of chromium
	75	Nickel and articles thereof
	8105 90 00 10	Bars or wires made of cobalt alloy containing, by weight:35 % (± 2 %) cobalt,25 % (± 1 %) nickel,19 % (± 1 %) chromium and7 % (± 2 %) ironconforming to the material specifications AMS 5842, of a kind used in the aerospace industry

Silver

2616 10

Silver ores and concentrates

Zinc

	2608	Zinc ores and concentrates
	79	Zinc and articles thereof

ANNEX VIIILuxury goods referred to in Article 10EXPLANATORY NOTEThe nomenclature codes are taken from the Combined Nomenclature as defined in Article 1(2) of Council Regulation (EEC) No 2658/87 of 23 July 1987 on the tariff and statistical nomenclature and on the Common Customs Tariff and as set out in Annex I thereto, which are valid at the time of publication of this Regulation and mutatis mutandis as amended by subsequent legislation.(1)Horses

	01012100	Pure-bred breeding animals
ex	01012990	Other

(2)Caviar and caviar substitutes

	16043100	Caviar
	16043200	Caviar substitutes

(3)Truffles and preparations thereof

	07095950	Truffles
ex	07108069	Other
ex	07115900	Other
ex	07123900	Other
ex	20019097	Other
	20039010	Truffles
ex	21039090	Other
ex	21041000	Soups and broths and preparations therefor
ex	21042000	Homogenised composite food preparations
ex	21060000	Food preparations not elsewhere specified or included

(4)Wines (including sparkling wines), beers, spirits and spirituous beverages

	22030000	Beer made from malt
	22041011	Champagne
	22041091	Asti spumante
	22041093	Other
	22041094	With a protected geographical indication (PGI)
	22041096	Other varietal wines
	22041098	Other
	22042100	In containers holding 2 litres or less
	22042900	Other
	22050000	Vermouth and other wine of fresh grapes flavoured with plants or aromatic substances
	22060000	Other fermented beverages (for example, cider, perry, mead, saké); mixtures of fermented beverages and mixtures of fermented beverages with non-alcoholic beverages, not elsewhere specified or included
	22071000	Undenatured ethyl alcohol of an alcoholic strength by volume of 80 % vol or higher
	22080000	Undenatured ethyl alcohol of an alcoholic strength by volume of less than 80 % vol; spirits, liqueurs and other spirituous beverages

(5)Cigars and cigarillos

	24021000	Cigars, cheroots and cigarillos, containing tobacco
	24029000	Other

(6)Perfumes, toilet waters and cosmetics, including beauty and make-up products

	3303	Perfumes and toilet waters
	33040000	Beauty or make-up preparations and preparations for the care of the skin (other than medicaments), including sunscreen or suntan preparations; manicure or pedicure preparations
	33050000	Preparations for use on the hair
	33070000	Pre-shave, shaving or aftershave preparations, personal deodorants, bath preparations, depilatories and other perfumery, cosmetic or toilet preparations, not elsewhere specified or included; prepared room deodorisers, whether or not perfumed or having disinfectant properties
	67040000	Wigs, false beards, eyebrows and eyelashes, switches and the like, of human or animal hair or of textile materials; articles of human hair not elsewhere specified or included

(7)Leather, saddlery and travel goods, handbags and similar articles of a value exceeding EUR 50 each

ex	42010000	Saddlery and harness for any animal (including traces, leads, knee pads, muzzles, saddle-cloths, saddlebags, dog coats and the like), of any material
ex	42020000	Trunks, suitcases, vanity cases, executive-cases, briefcases, school satchels, spectacle cases, binocular cases, camera cases, musical instrument cases, gun cases, holsters and similar containers; travelling-bags, insulated food or beverages bags, toilet bags, rucksacks, handbags, shopping-bags, wallets, purses, map-cases, cigarette-cases, tobacco-pouches, tool bags, sports bags, bottle-cases, jewellery boxes, powder boxes, cutlery cases and similar containers, of leather or of composition leather, of sheeting of plastics, of textile materials, of vulcanised fibre or of paperboard, or wholly or mainly covered with such materials or with paper
ex	42050090	Other
ex	96050000	Travel sets for personal toilet, sewing or shoe or clothes cleaning

(8)Coats of a value exceeding EUR 75 each, or other garments, clothing accessories and shoes (regardless of their material) of a value exceeding EUR 20 each

ex	42030000	Articles of apparel and clothing accessories, of leather or of composition leather
ex	43030000	Articles of apparel, clothing accessories and other articles of furskin
ex	61010000	Men's or boys' overcoats, car coats, capes, cloaks, anoraks (including ski jackets), windcheaters, wind-jackets and similar articles, knitted or crocheted, other than those of heading 6103
ex	61020000	Women's or girls' overcoats, car coats, capes, cloaks, anoraks (including ski jackets), windcheaters, wind-jackets and similar articles, knitted or crocheted, other than those of heading 6104
ex	61030000	Men's or boys' suits, ensembles, jackets, blazers, trousers, bib and brace overalls, breeches and shorts (other than swimwear), knitted or crocheted
ex	61040000	Women's or girls' suits, ensembles, jackets, blazers, dresses, skirts, divided skirts, trousers, bib and brace overalls, breeches and shorts (other than swimwear), knitted or crocheted
ex	61050000	Men's or boys' shirts, knitted or crocheted
ex	61060000	Women's or girls' blouses, shirts and shirt-blouses, knitted or crocheted
ex	61070000	Men's or boys' underpants, briefs, nightshirts, pyjamas, bathrobes, dressing gowns and similar articles, knitted or crocheted
ex	61080000	Women's or girls' slips, petticoats, briefs, panties, nightdresses, pyjamas, négligés, bathrobes, dressing gowns and similar articles, knitted or crocheted
ex	61090000	T-shirts, singlets and other vests, knitted or crocheted
ex	61100000	Jerseys, pullovers, cardigans, waistcoats and similar articles, knitted or crocheted
ex	61110000	Babies' garments and clothing accessories, knitted or crocheted
ex	61121100	Of cotton
ex	61121200	Of synthetic fibres
ex	61121900	Of other textile materials
	61122000	Ski suits
	61123100	Of synthetic fibres
	61123900	Of other textile materials
	61124100	Of synthetic fibres
	61124900	Of other textile materials
ex	61130010	Of knitted or crocheted fabrics of heading 5906
ex	61130090	Other
ex	61140000	Other garments, knitted or crocheted
ex	61150000	Pantyhose, tights, stockings, socks and other hosiery, including graduated compression hosiery (for example, stockings for varicose veins) and footwear without applied soles, knitted or crocheted
ex	61160000	Gloves, mittens and mitts, knitted or crocheted
ex	61170000	Other made-up clothing accessories, knitted or crocheted; knitted or crocheted parts of garments or of clothing accessories
ex	62010000	Men's or boys' overcoats, car coats, capes, cloaks, anoraks (including ski jackets), windcheaters, wind-jackets and similar articles, other than those of heading 6203
ex	62020000	Women's or girls' overcoats, car coats, capes, cloaks, anoraks (including ski jackets), windcheaters, wind-jackets and similar articles, other than those of heading 6204
ex	62030000	Men's or boys' suits, ensembles, jackets, blazers, trousers, bib and brace overalls, breeches and shorts (other than swimwear)
ex	62040000	Women's or girls. suits, ensembles, jackets, blazers, dresses, skirts, divided skirts, trousers, bib and brace overalls, breeches and shorts (other than swimwear)
ex	62050000	Men's or boys' shirts
ex	62060000	Women's or girls' blouses, shirts and shirt-blouses
ex	62070000	Men's or boys' singlets and other vests, underpants, briefs, nightshirts, pyjamas, bathrobes, dressing gowns and similar articles
ex	62080000	Women's or girls' singlets and other vests, slips, petticoats, briefs, panties, nightdresses, pyjamas, négligés, bathrobes, dressing gowns and similar articles
ex	62090000	Babies' garments and clothing accessories
ex	62101000	Of fabrics of heading 5602 or 5603
ex	62102000	Other garments, of the type described in subheadings 620111 to 620119
ex	62103000	Other garments, of the type described in subheadings 620211 to 620219
ex	62104000	Other men's or boys' garments
ex	62105000	Other women's or girls' garments
	62111100	Men's or boys'
	62111200	Women's or girls'
	62112000	Ski suits
ex	62113200	Of cotton
ex	62113300	Of man-made fibres
ex	62113900	Of other textile materials
ex	62114200	Of cotton
ex	62114300	Of man-made fibres
ex	62114900	Of other textile materials
ex	62120000	Brassières, girdles, corsets, braces, suspenders, garters and similar articles and parts thereof, whether or not knitted or crocheted
ex	62130000	Handkerchiefs
ex	62140000	Shawls, scarves, mufflers, mantillas, veils and the like
ex	62150000	Ties, bow ties and cravats
ex	62160000	Gloves, mittens and mitts
ex	62170000	Other made-up clothing accessories; parts of garments or of clothing accessories, other than those of heading 6212
ex	64010000	Waterproof footwear with outer soles and uppers of rubber or of plastics, the uppers of which are neither fixed to the sole nor assembled by stitching, riveting, nailing, screwing, plugging or similar processes
ex	64022000	Footwear with upper straps or thongs assembled to the sole by means of plugs
ex	64029100	Covering the ankle
ex	64029900	Other
ex	64031900	Other
ex	64032000	Footwear with outer soles of leather, and uppers which consist of leather straps across the instep and around the big toe
ex	64034000	Other footwear, incorporating a protective metal toecap
ex	64035100	Covering the ankle
ex	64035900	Other
ex	64039100	Covering the ankle
ex	64039900	Other
ex	64041910	Slippers and other indoor footwear
ex	64042000	Footwear with outer soles of leather or composition leather
ex	64050000	Other footwear
ex	65040000	Hats and other headgear, plaited or made by assembling strips of any material, whether or not lined or trimmed
ex	65050010	Of fur felt or of felt of wool and fur, made from the hat bodies, hoods or plateaux of heading 65010000
ex	65050030	Peaked caps
ex	65050090	Other
ex	65069900	Of other materials
ex	66019100	Having a telescopic shaft
ex	66019900	Other
ex	66020000	Walking sticks, seat-sticks, whips, riding-crops and the like
ex	96190081	Napkins and napkin liners for babies

(9)Carpets, rugs and tapestries, hand-made or not

	57010000	Carpets and other textile floor coverings, knotted, whether or not made up
	57021000	"Kelem", "Schumacks", "Karamanie" and similar hand-woven rugs
	57022000	Floor coverings of coconut fibres (coir)

October 16, 2017	annex XV Text	Addition
October 16, 2017	annex XVI Text	Addition

Council Regulation (EU) 2017/1509 of 30 August 2017 concerning restrictive measures against the Democratic People's Republic of Korea and repealing Regulation (EC) No 329/2007

Modified by

Council Implementing Regulation (EU) 2017/1859 of 16 October 2017 implementing Regulation (EU) 2017/1509 concerning restrictive measures against the Democratic People's Republic of Korea