Articles (so-called "thumb grips for a game console controller") measuring approximately 20 mm in diameter and 6 mm in height made of elastic silicone (plastics) with an anti-slip surface. They are equipped with a self-adhesive aluminium profile, cut to the design of the support.These grips are used as caps on the joysticks of a game console controller.The thumb grip caps are intended to protect the game controller against the sweat, wear and tear caused by intensive use, as well as to prevent fingers from slipping off the controller, by means of their anti-slip surface.See image | 39269097 | Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature and by the wording of CN codes 3926, 392690 and 39269097.The "thumb grips" merely enhance the function of the game controller. Thus, they are neither adapting the game controller for a particular operation, nor increasing its range of operations, nor performing a particular service relative to the main function of the game controller or of the game console (see case C-152/10 Unomedical ECLI:EU:C:2011:402, paragraphs 13, 29 and 38).Consequently, the classification as an accessory of video game consoles and machines of heading 9504 is excluded.The article is therefore to be classified according to its constituent material (plastics) under CN code 39269097 as other articles of plastics. |