Commission Implementing Regulation (EU) 2017/63 of 14 December 2016 concerning the authorisation of benzyl alcohol, 4-isopropylbenzyl alcohol, benzaldehyde, 4-isopropylbenzaldehyde, salicylaldehyde, p-tolualdehyde, 2-methoxybenzaldehyde, benzoic acid, benzyl acetate, benzyl butyrate, benzyl formate, benzyl propionate, benzyl hexanoate, benzyl isobutyrate, benzyl isovalerate, hexyl salicylate, benzyl phenylacetate, methyl benzoate, ethyl benzoate, isopentyl benzoate, pentyl salicylate and isobutyl benzoate as feed additives for all animal a species and of veratraldehyde and gallic acid as feed additives for certain animal species (Text with EEA relevance. )
Commission Implementing Regulation (EU) 2017/63of 14 December 2016concerning the authorisation of benzyl alcohol, 4-isopropylbenzyl alcohol, benzaldehyde, 4-isopropylbenzaldehyde, salicylaldehyde, p-tolualdehyde, 2-methoxybenzaldehyde, benzoic acid, benzyl acetate, benzyl butyrate, benzyl formate, benzyl propionate, benzyl hexanoate, benzyl isobutyrate, benzyl isovalerate, hexyl salicylate, benzyl phenylacetate, methyl benzoate, ethyl benzoate, isopentyl benzoate, pentyl salicylate and isobutyl benzoate as feed additives for all animal a species and of veratraldehyde and gallic acid as feed additives for certain animal species(Text with EEA relevance) THE EUROPEAN COMMISSION,Having regard to the Treaty on the Functioning of the European Union,Having regard to Regulation (EC) No 1831/2003 of the European Parliament and of the Council of 22 September 2003 on additives for use in animal nutritionOJ L 268, 18.10.2003, p. 29., and in particular Article 9(2) thereof,Whereas:(1)Regulation (EC) No 1831/2003 provides for the authorisation of additives for use in animal nutrition and for the grounds and procedures for granting such authorisation. Article 10 of that Regulation provides for the re-evaluation of additives authorised pursuant to Council Directive 70/524/EECCouncil Directive 70/524/EEC of 23 November 1970 concerning additives in feedingstuffs (OJ L 270, 14.12.1970, p. 1)..(2)Benzyl alcohol, 4-isopropylbenzyl alcohol, benzaldehyde, veratraldehyde, 4-isopropylbenzaldehyde, salicylaldehyde, p-tolualdehyde, 2-methoxybenzaldehyde, benzoic acid, gallic acid, benzyl acetate, benzyl butyrate, benzyl formate, benzyl propionate, benzyl hexanoate, benzyl isobutyrate, benzyl isovalerate, hexyl salicylate, benzyl phenylacetate, methyl benzoate, ethyl benzoate, isopentyl benzoate, pentyl salicylate and isobutyl benzoate ("substances concerned") were authorised without a time limit in accordance with Directive 70/524/EEC as feed additives for all animal species. Those products were subsequently entered in the Register of feed additives as existing products, in accordance with Article 10(1) of Regulation (EC) No 1831/2003. Veratraldehyde for poultry and fish and gallic acid for fish will not be re-authorised as they were withdrawn by the applicant.(3)In accordance with Article 10(2) of Regulation (EC) No 1831/2003 in conjunction with Article 7 thereof, an application was submitted for the re-evaluation of benzyl alcohol, 4-isopropylbenzyl alcohol, benzaldehyde, 4-isopropylbenzaldehyde, salicylaldehyde, p-tolualdehyde, 2-methoxybenzaldehyde, benzoic acid, benzyl acetate, benzyl butyrate, benzyl formate, benzyl propionate, benzyl hexanoate, benzyl isobutyrate, benzyl isovalerate, hexyl salicylate, benzyl phenylacetate, methyl benzoate, ethyl benzoate, isopentyl benzoate, pentyl salicylate and isobutyl benzoate as feed additives for all animal a species and of veratraldehyde and gallic acid as feed additives for certain animal species. The applicant requested those additives be classified in the additive category "sensory additives". That application was accompanied by the particulars and documents required under Article 7(3) of Regulation (EC) No 1831/2003.(4)The European Food Safety Authority ("the Authority") concluded in its opinion of 13 June 2012EFSA Journal 2012;10(7):2785. that, under the proposed conditions of use the substances concerned do not have adverse effects on animal health, human health or the environment. The Authority further concluded that the function of the substances concerned in feed is similar to that on food. The Authority has already concluded that for food the substances concerned are efficacious, as they increase the food smell or palatability. Therefore, that conclusion can be extrapolated for feed. The Authority cannot conclude on the safety of the concerned substances in water for drinking. However, those substances can be used within compound feeds which are subsequently administered via water.(5)Restrictions and conditions should be provided for to allow better control. Since safety reasons do not require the setting of a maximum content, except for benzoic acid, and taking into account the re-evaluation performed by the Authority, recommended contents should be indicated on the label of the additive. Where such contents are exceeded, certain information should be indicated on the label of premixtures, compound feeds and feed materials.(6)The Authority concluded that in the absence of data the substances concerned should be considered as potentially hazardous to the respiratory tract, skin and eyes, skin sensitisers and harmful if swallowed. Consequently, appropriate protective measures should be taken The Authority does not consider that there is a need for specific requirements of post-market monitoring. It also verified the report on the method of analysis of the feed additives in feed submitted by the Reference Laboratory set up by Regulation (EC) No 1831/2003.(7)The assessment of the substances concerned shows that the conditions for authorisation, as provided for in Article 5 of Regulation (EC) No 1831/2003, are satisfied. Accordingly, the use of those substances should be authorised as specified in the Annex to this Regulation.(8)Since safety reasons do not require the immediate application of the modifications to the conditions of authorisation for the substances concerned, it is appropriate to allow a transitional period for interested parties to prepare themselves to meet the new requirements resulting from the authorisation.(9)The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on Plants, Animals, Food and Feed,HAS ADOPTED THIS REGULATION:
Article 1AuthorisationThe substances specified in the Annex, belonging to the additive category "sensory additives" and to the functional group "flavouring compounds", are authorised as feed additives in animal nutrition subject to the conditions laid down in that Annex.
Article 2Transitional measures1.The substances specified in the Annex and premixtures containing those substances, which are produced and labelled before 6 August 2017 in accordance with the rules applicable before 6 February 2017 may continue to be placed on the market and used until the existing stocks are exhausted.2.Compound feed and feed materials containing the substances as specified in the Annex which are produced and labelled before 6 February 2018 in accordance with the rules applicable before 6 February 2017 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for food-producing animals.3.Compound feed and feed materials containing the substances as specified in the Annex which are produced and labelled before 6 February 2019 in accordance with the rules applicable before 6 February 2017 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for non-food-producing animals.
Article 3Entry into forceThis Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 14 December 2016.For the CommissionThe PresidentJean-Claude JunckerANNEX
Details of the analytical methods are available at the following address of the Reference Laboratory: https://ec.europa.eu/jrc/en/eurl/feed-additives/evaluation-reportsCategory: Sensory additives. Functional group: Flavouring compounds
Identification number of the additiveName of the holder of authorisationAdditiveComposition, chemical formula, description, analytical methodSpecies or category of animalMaximum ageMinimum contentMaximum contentOther provisionsEnd of period of authorisation
mg of active substance/kg of complete feedingstuff with a moisture content of 12 %
(1)(2)(3)(4)(5)(6)(7)(8)(9)
2b02010—Benzyl alcoholAdditive compositionBenzyl alcoholCharacterisation of the active substanceBenzyl alcoholProduced by chemical synthesisPurity: min. 98 %Chemical formula: C7H8OCAS number 100-51-6FLAVIS No 02.010Method of analysisFor the determination of benzyl alcohol in the feed additive and in feed flavouring premixtures.Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 125 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 125 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 125 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b02039—4-Isopropylbenzyl alcoholAdditive composition4-Isopropylbenzyl alcoholCharacterisation of the active substance4-Isopropylbenzyl alcoholProduced by chemical synthesisPurity: min. 97 %Chemical formula: C10H14OCAS number 536-60-7FLAVIS No 02.039Method of analysisFor the determination of 4-isopropylbenzyl alcohol in the feed additive and in feed flavouring premixtures.Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b05013—BenzaldehydeAdditive compositionBenzaldehydeCharacterisation of the active substanceBenzaldehydeProduced by chemical synthesisPurity: min. 98 %Chemical formula: C7H6OCAS number 100-52-7FLAVIS No 05.013Method of analysisFor the determination of benzaldehyde in the feed additive and in feed flavouring premixtures.Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 25 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 25 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 25 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b05017—VeratraldehydeAdditive compositionVeratraldehydeCharacterisation of the active substanceVeratraldehydeProduced by chemical synthesisPurity: min. 95 %Chemical formula: C9H10O3CAS number 120-14-9FLAVIS No 05.017Method of analysisFor the identification of veratraldehyde in the feed additive and flavouring premixtures.Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species except poultry and fish———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b05022—4-IsopropylbenzaldehydeAdditive composition4-IsopropylbenzaldehydeCharacterisation of the active substance4-IsopropylbenzaldehydeProduced by chemical synthesisPurity: min. 95 %Chemical formula: C10H12OCAS number 122-03-2FLAVIS No 05.022Method of analysisFor the determination of 4-isopropylbenzaldehyde in the feed additive and in feed flavouring premixtures.Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species——1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b05055—SalicylaldehydeAdditive compositionSalicylaldehydeCharacterisation of the active substanceSalicylaldehydeProduced by chemical synthesisPurity: min. 95 %Chemical formula: C7H6O2CAS number 90-02-8FLAVIS No 05.055Method of analysisFor the identification of salicylaldehyde in the feed additive and flavouring premixtures.Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 1 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 1 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 1 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b05029—p-TolualdehydeAdditive compositionp-TolualdehydeCharacterisation of the active substancep-TolualdehydeProduced by chemical synthesisPurity: min. 97 %Chemical formula: C8H8OCAS number 104-87-0FLAVIS No 05.029Method of analysisFor the determination of p-tolualdehyde in the feed additive and in feed flavouring premixtures.Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be:5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b05129—2-MethoxybenzaldehydeAdditive composition2-MethoxybenzaldehydeCharacterisation of the active substance2-MethoxybenzaldehydeProduced by chemical synthesisPurity: min. 97 %Chemical formula: C8H8O2CAS number 135-02-4FLAVIS No 05.129Method of analysisFor the identification of 2-methoxybenzaldehyde in the feed additive and flavouring premixtures.Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 1 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 1 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 1 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b08021—Benzoic acidAdditive compositionBenzoic acidCharacterisation of the active substanceBenzenecarboxylic acid, phenylcarboxylic acidProduced by chemical synthesisPurity: min. 99 %Chemical formula: C7H6O2CAS number 65-85-0FLAVIS No 08.021Maximum level of impuritiesPhthalic acid: ≤ 100 mg/kg;Biphenyl: ≤ 100 mg/kgMethod of analysisFor the determination of benzoic acid in the feed additive and in feed flavouring premixtures.Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species——1251.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.For users of the additive and premixtures in a feed business, operational procedures and appropriate organisational measures shall be established to address hazards by inhalation, dermal contact or eyes contact. Where the dermal, inhalatory or eyes exposure cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.6 February 2027
2b08080—Gallic acidAdditive compositionGallic acidCharacterisation of the active substanceGallic acidProduced by chemical synthesisPurity: min. 95 %Chemical formula: C7H6O5CAS number 149-91-7FLAVIS No 08.080Method of analysisFor the identification of gallic acid in the feed additive and flavouring premixtures.Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species except fish———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 25 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 25 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 25 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b09014—Benzyl acetateAdditive compositionBenzyl acetateCharacterisation of the active substanceBenzyl acetateProduced by chemical synthesisPurity: min. 98 %Chemical formula: C9H10O2CAS number 140-11-4FLAVIS No 09.014Method of analysisFor the determination of benzyl acetate in the feed additive and in feed flavouring premixtures.Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 125 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 125 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 125 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b09051—Benzyl butyrateAdditive compositionBenzyl butyrateCharacterisation of the active substanceBenzyl butyrateProduced by chemical synthesisPurity: min. 98 %Chemical formula: C11H14O2CAS number 103-37-7FLAVIS No 09.051Method of analysisFor the determination of benzyl butyrate in the feed additive and in feed flavouring premixtures.Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b09077—Benzyl formateAdditive compositionBenzyl formateCharacterisation of the active substanceBenzyl formateProduced by chemical synthesisPurity: min. 95 %Chemical formula: C8H8O2CAS number 104-57-4FLAVIS No 09.077Method of analysisFor the determination of benzyl formate in the feed additive and in feed flavouring premixtures.Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b09132—Benzyl propionateAdditive compositionBenzyl propionateCharacterisation of the active substanceBenzyl propionateProduced by chemical synthesisPurity: min. 98 %Chemical formula: C10H12O2CAS number 122-63-4FLAVIS No 09.132Method of analysisFor the determination of benzyl propionate in the feed additive and in feed flavouring premixtures.Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 25 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 25 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 25 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b09316Benzyl hexanoateAdditive compositionBenzyl hexanoateCharacterisation of the active substanceBenzyl hexanoateProduced by chemical synthesisPurity: min. 99 %Chemical formula: C13H18O2CAS number 6938-45-0FLAVIS No 09.316Method of analysisFor the identification of benzyl hexanoate in the feed additive and flavouring premixtures.Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be:for pigs and poultry: 1 mg/kg, and for other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:1 mg/kg for pigs and poultry;1,5 mg/kg for other species and categories".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded:1 mg/kg for pigs and poultry;1,5 mg/kg for other species and categories.'6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b09426—Benzyl isobutyrateAdditive compositionBenzyl isobutyrateCharacterisation of the active substanceBenzyl isobutyrateProduced by chemical synthesisPurity: min. 97 %Chemical formula: C11H14O2CAS number 103-28-6FLAVIS No 09.426Method of analysisFor the determination of benzyl isobutyrate in the feed additive and in feed flavouring premixtures.Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b09458—Benzyl isovalerateAdditive compositionBenzyl isovalerateCharacterisation of the active substanceBenzyl isovalerateProduced by chemical synthesisPurity: min. 98 %Chemical formula: C12H16O2CAS number 103-38-8FLAVIS No 09.458Method of analysisFor the determination of benzyl isovalerate in the feed additive and in feed flavouring premixtures.Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b09581—Hexyl salicylateAdditive compositionHexyl salicylateCharacterisation of the active substanceHexyl salicylateProduced by chemical synthesisPurity: min. 99 %Chemical formula: C13H18O3CAS number 6259-76-3FLAVIS No 09.581Method of analysisFor the identification of hexyl salicylate in the feed additive and flavouring premixtures.Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 1 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 1 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 1 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b09705—Benzyl phenylacetateAdditive compositionBenzyl phenylacetateCharacterisation of the active substanceBenzyl phenylacetateProduced by chemical synthesisPurity: min. 98 %Chemical formula: C15H14O2CAS number 102-16-9FLAVIS No 09.705Method of analysisFor the determination of benzyl phenylacetate in the feed additive and in feed flavouring premixtures.Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b09725—Methyl benzoateAdditive compositionMethyl benzoateCharacterisation of the active substanceMethyl benzoateProduced by chemical synthesisPurity: min. 98 %Chemical formula: C8H8O2CAS number 93-58-3FLAVIS No 09.725Method of analysisFor the determination of methyl benzoate in the feed additive and in feed flavouring premixtures.Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b09726—Ethyl benzoateAdditive compositionEthyl benzoateCharacterisation of the active substanceEthyl benzoateProduced by chemical synthesisPurity: min. 98 %Chemical formula: C9H10O2CAS number 93-89-0FLAVIS No 09.726Method of analysisFor the determination of ethyl benzoate in the feed additive and in feed flavouring premixtures.Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species——1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b09755—Isopentyl benzoateAdditive compositionIsopentyl benzoateCharacterisation of the active substanceIsopentyl benzoateProduced by chemical synthesisPurity: min. 98 %Chemical formula: C12H16O2CAS number 94-46-2FLAVIS No 09.755Method of analysisFor the determination of isopentyl benzoate in the feed additive and in feed flavouring premixtures.Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg"5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b09762—Pentyl salicylateAdditive compositionPentyl salicylateCharacterisation of the active substancePentyl salicylateProduced by chemical synthesisPurity: min. 95 %Chemical formula C12H16O3CAS number 2050-08-0FLAVIS No 09.762Method of analysisFor the identification of pentyl salicylate in the feed additive and flavouring premixtures.Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 1 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 1 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 1 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b09757—Isobutyl benzoateAdditive compositionIsobutyl benzoateCharacterisation of the active substanceIsobutyl benzoateProduced by chemical synthesisPurity: min. 98 %Chemical formula: C11H14O2CAS number 120-50-3FLAVIS No 09.757Method of analysisFor the determination of isobutyl benzoate in the feed additive and in feed flavouring premixtures.Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 5 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027