Commission Implementing Regulation (EU) 2017/62 of 14 December 2016 concerning the authorisation of 3-(methylthio) propionaldehyde, methyl 3-(methylthio) propionate, allylthiol, dimethyl sulfide, dibutyl sulfide, diallyl disulfide, diallyl trisulfide, dimethyl trisulfide, dipropyl disulfide, allyl isothiocyanate, dimethyl disulfide, 2-methylbenzene-1-thiol, S-methyl butanethioate, allyl methyl disulfide, 3-(methylthio) propan-1-ol, 3-(methylthio) hexan-1-ol, 1-propane-1-thiol, diallyl sulfide, 2,4-dithiapentane, 2-methyl-2-(methyldithio) propanal, 2-methylpropane-1-thiol, methylsulfinyl methane, propane-2-thiol, 3,5-dimethyl-1,2,4-trithiolane and 2-methyl-4-propyl-1,3-oxathiane as feed additives for all animal species (Text with EEA relevance. )
Commission Implementing Regulation (EU) 2017/62of 14 December 2016concerning the authorisation of 3-(methylthio) propionaldehyde, methyl 3-(methylthio) propionate, allylthiol, dimethyl sulfide, dibutyl sulfide, diallyl disulfide, diallyl trisulfide, dimethyl trisulfide, dipropyl disulfide, allyl isothiocyanate, dimethyl disulfide, 2-methylbenzene-1-thiol, S-methyl butanethioate, allyl methyl disulfide, 3-(methylthio) propan-1-ol, 3-(methylthio) hexan-1-ol, 1-propane-1-thiol, diallyl sulfide, 2,4-dithiapentane, 2-methyl-2-(methyldithio) propanal, 2-methylpropane-1-thiol, methylsulfinyl methane, propane-2-thiol, 3,5-dimethyl-1,2,4-trithiolane and 2-methyl-4-propyl-1,3-oxathiane as feed additives for all animal species(Text with EEA relevance) THE EUROPEAN COMMISSION,Having regard to the Treaty on the Functioning of the European Union,Having regard to Regulation (EC) No 1831/2003 of the European Parliament and of the Council of 22 September 2003 on additives for use in animal nutritionOJ L 268, 18.10.2003, p. 29., and in particular Article 9(2) thereof,Whereas:(1)Regulation (EC) No 1831/2003 provides for the authorisation of additives for use in animal nutrition and for the grounds and procedures for granting such authorisation. Article 10 of that Regulation provides for the re-evaluation of additives authorised pursuant to Council Directive 70/524/EECCouncil Directive 70/524/EEC of 23 November 1970 concerning additives in feeding-stuffs (OJ L 270, 14.12.1970, p. 1)..(2)3-(Methylthio) propionaldehyde, methyl 3-(methylthio) propionate, allylthiol, dimethyl sulfide, dibutyl sulfide, diallyl disulfide, diallyl trisulfide, dimethyl trisulfide, dipropyl disulfide, allyl isothiocyanate, dimethyl disulfide, 2-methylbenzene-1-thiol, S-methyl butanethioate, allyl methyl disulfide, 3-(methylthio) propan-1-ol, 3-(methylthio) hexan-1-ol, 1-propane-1-thiol, diallyl sulfide, 2,4-dithiapentane, 2-methyl-2-(methyldithio) propanal, 2-methylpropane-1-thiol, methylsulfinyl methane, propane-2-thiol, 3,5-dimethyl-1,2,4-trithiolane and 2-methyl-4-propyl-1,3-oxathiane ("the substances concerned") were authorised without a time limit in accordance with Directive 70/524/EEC as feed additives for all animal species. Those products were subsequently entered in the Register of feed additives as existing products, in accordance with Article 10(1) of Regulation (EC) No 1831/2003.(3)In accordance with Article 10(2) of Regulation (EC) No 1831/2003 in conjunction with Article 7 thereof, an application was submitted for the re-evaluation of the substances concerned as feed additives for all animal species. The applicant requested those additives to be classified in the additive category "sensory additives". That application was accompanied by the particulars and documents required under Article 7(3) of Regulation (EC) No 1831/2003.(4)The European Food Safety Authority ("the Authority") concluded in its opinion of 17 April 2013EFSA Journal 2013;11(5):3208. that, under the proposed conditions of use in feed the substances concerned do not have adverse effects on animal health, human health or the environment. For allyl isothiocyanate, the Authority stated that, although additional exposure to that substance through its low use level in animal feeds would not substantially increase consumer exposure, the estimated exposure of consumers is already higher than the acceptable daily intake. For allyl isothiocyanate and 2-methylpropane-1-thiol maximum contents should be set up to ensure consumer safety and environmental protection, respectively. The Authority further concluded that the function of the substances concerned in feed is similar to that on food. The Authority has already concluded that for food the substances concerned are efficacious, as it increases the food smell or palatability. Therefore, that conclusion can be extrapolated for feed. The Authority could not conclude on the safety of the substances concerned used in water for drinking. However, those substances can be used within compound feeds which are subsequently administered via water.(5)Restrictions and conditions should be provided for to allow better control. For all the substances except allyl isothiocyanate and 2-methylpropane-1-thiol, since safety reasons do not require the setting of a maximum content and, taking into account the re-evaluation performed by the Authority, recommended contents should be indicated on the label of the additive. Where such contents are exceeded, certain information should be indicated on the label of premixtures, compound feeds and feed materials.(6)The Authority concluded that the substances concerned are to be considered as being irritant to skin, eyes and respiratory tract and as a skin sensitiser. Consequently, appropriate protective measures should be taken. The Authority does not consider that there is a need for specific requirements of post-market monitoring. It also verified the report on the method of analysis of the feed additives in feed submitted by the Reference Laboratory set up by Regulation (EC) No 1831/2003.(7)The assessment of the substances concerned shows that the conditions for authorisation, as provided for in Article 5 of Regulation (EC) No 1831/2003, are satisfied. Accordingly, the use of those substances should be authorised as specified in the Annex to this Regulation.(8)Since safety reasons do not require the immediate application of the modifications to the conditions of authorisation for the substances concerned, it is appropriate to allow a transitional period for interested parties to prepare themselves to meet the new requirements resulting from the authorisation.(9)The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on Plants, Animals, Food and Feed,HAS ADOPTED THIS REGULATION:
Article 1AuthorisationThe substances specified in the Annex, belonging to the additive category "sensory additives" and to the functional group "flavouring compounds", are authorised as feed additives in animal nutrition subject to the conditions laid down in that Annex.
Article 2Transitional measures1.The substances specified in the Annex and premixtures containing those substances, which are produced and labelled before 6 August 2017 in accordance with the rules applicable before 6 February 2017 may continue to be placed on the market and used until the existing stocks are exhausted.2.Compound feed and feed materials containing the substances as specified in the Annex which are produced and labelled before 6 February 2018 in accordance with the rules applicable before 6 February 2017 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for food-producing animals.3.Compound feed and feed materials containing the substances as specified in the Annex which are produced and labelled before 6 February 2019 in accordance with the rules applicable before 6 February 2017 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for non-food-producing animals.
Article 3Entry into forceThis Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 14 December 2016.For the CommissionThe PresidentJean-Claude JunckerANNEX
Details of the analytical methods are available at the following address of the Reference Laboratory: https://ec.europa.eu/jrc/en/eurl/feed-additives/evaluation-reportsCategory: Sensory additives. Functional group: Flavouring compounds
Identification number of the additiveName of the holder of authorisationAdditiveComposition, chemical formula, description, analytical methodSpecies or category of animalMaximum ageMinimum contentMaximum contentOther provisionsEnd of period of authorisation
mg of active substance/kg of complete feedingstuff with a moisture content of 12 %
(1)(2)(3)(4)(5)(6)(7)(8)(9)
2b12001—3-(Methylthio)propionaldehydeAdditive composition3-(Methylthio) propionaldehydeCharacterisation of the active substance3-(Methylthio) propionaldehydeProduced by chemical synthesisPurity: min. 98 %Chemical formula: C4H8OSCAS number 3268-49-3FLAVIS No 12.001Method of analysisFor the determination of 3-(methylthio) propionaldehyde in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b12002—Methyl 3-(methylthio)propionateAdditive compositionMethyl 3-(methylthio)propionateCharacterisation of the active substanceMethyl 3-(methylthio)propionateProduced by chemical synthesisPurity: min. 97 %Chemical formula: C5H10O2SCAS number 13532-18-8FLAVIS No 12.002Method of analysisFor the determination of methyl 3-(methylthio)propionate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b12004—AllylthiolAdditive compositionAllylthiolCharacterisation of the active substanceAllylthiolProduced by chemical synthesisPurity: min. 75 % (min. 98 % allylthiol + allyl sulphide + allyl mercaptan)Chemical formula: C3H6SCAS number 870-23-5FLAVIS No 12.004Method of analysisFor the determination of allylthiol in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b12006—Dimethyl sulfideAdditive compositionDimethyl sulfideCharacterisation of the active substanceDimethyl sulfideProduced by chemical synthesisPurity: min. 95 %Chemical formula: C2H6SCAS number 75-18-3FLAVIS No 12.006Method of analysisFor the determination of dimethyl sulfide in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b12007—Dibutyl sulfideAdditive compositionDibutyl sulfideCharacterisation of the active substanceDibutyl sulfideProduced by chemical synthesisPurity: min. 95 %Chemical formula: C8H18SCAS number 544-40-1FLAVIS No 12.007Method of analysisFor the determination of dibutyl sulfide in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b12008—Diallyl disulfideAdditive compositionDiallyl disulfideCharacterisation of the active substanceDiallyl disulfideProduced by chemical synthesisPurity: min. 80 % (min. 98 % diallyl disulphide +allyl sulphide + allyl mercaptan)Chemical formula: C6H10S2CAS number 2179-57-9FLAVIS No 12.008Method of analysisFor the determination of diallyl disulfide in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b12009—Diallyl trisulfideAdditive compositionDiallyl trisulfideCharacterisation of the active substanceDiallyl trisulfideProduced by chemical synthesisPurity: min. 65 % (min.95 % allyl di-, tri- and tetra sulfides)Chemical formula: C6H10S3CAS number 2050-87-5FLAVIS No 12.009Method of analysisFor the determination of diallyl trisulfide in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b12013—Dimethyl trisulfideAdditive compositionDimethyl trisulfideCharacterisation of the active substanceDimethyl trisulfideProduced by chemical synthesisPurity: min. 97 %Chemical formula: C2H6S3CAS number 3658-80-8FLAVIS No 12.013Method of analysisFor the determination of dimethyl trisulfide in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b12014—Dipropyl disulfideAdditive compositionDipropyl disulfideCharacterisation of the active substanceDipropyl disulfideProduced by chemical synthesisPurity: min. 98 %Chemical formula: C6H14S2CAS number 629-19-6FLAVIS No 12.014Method of analysisFor the determination of dipropyl disulfide in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b12025—Allyl isothiocyanateAdditive compositionAllyl isothiocyanateCharacterisation of the active substanceAllyl isothiocyanateProduced by chemical synthesisPurity: min. 98 %Chemical formula: C4H5NSCAS number 57-06-7FLAVIS No 12.025Method of analysisFor the identification of allyl isothiocyanate in the feed additive and flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species——0,051.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b12026—Dimethyl disulfideAdditive compositionDimethyl disulfideCharacterisation of the active substanceDimethyl disulfideProduced by chemical synthesisPurity: min. 97 %Chemical formula: C2H6S2CAS number 624-92-0FLAVIS No 12.026Method of analysisFor the determination of dimethyl disulfide in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b12027—2-Methylbenzene-1-thiolAdditive composition2-Methylbenzene-1-thiolCharacterisation of the active substance2-Methylbenzene-1-thiolProduced by chemical synthesisPurity: min. 95 %Chemical formula: C7H8SCAS number 137-06-4FLAVIS No 12.027Method of analysisFor the determination of 2-methylbenzene-1-thiol in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b12032—S-Methyl butanethioateAdditive compositionS-Methyl butanethioateCharacterisation of the active substanceS-Methyl butanethioateProduced by chemical synthesisPurity: min. 98 %Chemical formula: C5H10OSCAS number 2432-51-1FLAVIS No 12.032Method of analysisFor the determination of S-methyl butanethioate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b12037—Allyl methyl disulfideAdditive compositionAllyl methyl disulfideCharacterisation of the active substanceAllyl methyl disulfideProduced by chemical synthesisPurity: min. 90 %Chemical formula: C4H8S2CAS number 2179-58-0FLAVIS No 12.037Method of analysisFor the determination of allyl methyl disulfide in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b12062—3-(Methylthio)propan-1-olAdditive composition3-(Methylthio)propan-1-olCharacterisation of the active substance3-(Methylthio)propan-1-olProduced by chemical synthesisPurity: min. 98 %Chemical formula: C4H10OSCAS number 505-10-2FLAVIS No 12.062Method of analysisFor the determination of 3-(methylthio)propan-1-ol in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b12063—3-(Methylthio)hexan-1-olAdditive composition3-(Methylthio)hexan-1-olCharacterisation of the active substance3-(Methylthio)hexan-1-olProduced by chemical synthesisPurity: min. 97 %Chemical formula: C7H16OSCAS number 51755-66-9FLAVIS No 12.063Method of analysisFor the determination of 3-(methylthio)hexan-1-ol in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b12071—1-Propane-1-thiolAdditive composition1-Propane-1-thiolCharacterisation of the active substance1-Propane-1-thiolProduced by chemical synthesisPurity: min. 97 %Chemical formula: C3H8SCAS number 107-03-9FLAVIS No 12.071Method of analysisFor the determination of 1-propane-1-thiol in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b12088—Diallyl sulfideAdditive compositionDiallyl sulfideCharacterisation of the active substanceDiallyl sulfideProduced by chemical synthesisPurity: min. 97 %Chemical formula: C6H10SCAS number 592-88-1FLAVIS No 12.088Method of analysisFor the determination of diallyl sulfide in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b12118—2,4-DithiapentaneAdditive composition2,4-DithiapentaneCharacterisation of the active substance2,4-DithiapentaneProduced by chemical synthesisPurity: min. 99 %Chemical formula: C3H8S2CAS number 1618-26-4FLAVIS No 12.118Method of analysisFor the determination of 2,4-dithiapentane in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b12168—2-Methyl-2-(methyldithio) propanalAdditive composition2-Methyl-2-(methyldithio)propanalCharacterisation of the active substance2-Methyl-2-(methyldithio)propanalProduced by chemical synthesisPurity: min. 95 %Chemical formula: C5H10OS2CAS number 67952-60-7FLAVIS No 12.168Method of analysisFor the determination of 2-methyl-2-(methyldithio) propanal in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b12173—2-Methylpropane-1-thiolAdditive composition2-Methylpropane-1-thiolCharacterisation of the active substance2-Methylpropane-1-thiolProduced by chemical synthesisPurity: min. 97 %Chemical formula: C4H10SCAS number 513-44-0FLAVIS No 12.173Method of analysisFor the identification of 2-methylpropane-1-thiol in the feed additive and flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species——0,041.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b12175—Methylsulfinyl methaneAdditive compositionMethylsulfinylmethaneCharacterisation of the active substanceMethylsulfinylmethaneProduced by chemical synthesisPurity: min. 99 %Chemical formula: C2H6OSCAS number 67-68-5FLAVIS No 12.175Method of analysisFor the determination of methylsulfinylmethane in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b12197—Propane-2-thiolAdditive compositionPropane-2-thiolCharacterisation of the active substancePropane-2-thiolProduced by chemical synthesisPurity: min. 98 %Chemical formula: C3H8SCAS number 75-33-2FLAVIS No 12.197Method of analysisFor the determination of propane-2-thiol in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b15025—3,5-Dimethyl-1,2,4-trithiolaneAdditive composition3,5-Dimethyl-1,2,4-trithiolaneCharacterisation of the active substance3,5-Dimethyl-1,2,4-trithiolaneProduced by chemical synthesisPurity: min. 90 %Secondary components: diethyl trisulphide, dimethylbenzylcarbinol, N,N-dimethyl-ethanethioamide, 4,6-dimethyl1,2,3,5-tetracyclohexane, 3-methyl-1,2,4-trithiolane, 2-methyl-4-propyl 1,3-oxathianeChemical formula: C4H8S3CAS number 23654-92-4FLAVIS No 15.025Method of analysisFor the determination of 3,5-dimethyl-1,2,4-trithiolane in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027
2b16030—2-Methyl-4-propyl-1,3-oxathianeAdditive composition2-Methyl-4-propyl-1,3-oxathianeCharacterisation of the active substance2-Methyl-4-propyl-1,3-oxathianeProduced by chemical synthesisPurity: min. 98 %Chemical formula: C8H16OSCAS number 67715-80-4FLAVIS No 16.030Method of analysisFor the determination of 2-methyl-4-propyl-1,3-oxathiane in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.All animal species———1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive the following shall be indicated:"Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg".5.The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.6.For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.6 February 2027