Eurlexa

English
- Sign in
- Register

Commission Implementing Regulation (EU) 2017/53 of 14 December 2016 concerning the authorisation of butan-1-ol, hexan-1-ol, octan-1-ol, nonan-1-ol, dodecan-1-ol, heptan-1-ol, decan-1-ol, pentan-1-ol, ethanol, acetaldehyde, propanal, butanal, pentanal, hexanal, octanal, decanal, dodecanal, nonanal, heptanal, undecanal, 1,1-diethoxyethane, formic acid, acetic acid, propionic acid, valeric acid, hexanoic acid, octanoic acid, decanoic acid, dodecanoic acid, oleic acid, hexadecanoic acid, tetradecanoic acid, heptanoic acid, nonanoic acid, ethyl acetate, propyl acetate, butyl acetate, hexyl acetate, octyl acetate, nonyl acetate, decyl acetate, dodecyl acetate, heptyl acetate, methyl acetate, methyl butyrate, butyl butyrate, pentyl butyrate, hexyl butyrate, octyl butyrate, ethyl decanoate, ethyl hexanoate, propyl hexanoate, pentyl hexanoate, hexyl hexanoate, methyl hexanoate, ethyl formate, ethyl dodecanoate, ethyl tetradecanoate, ethyl nonanoate, ethyl octanoate, ethyl propionate, methyl propionate, ethyl valerate, butyl valerate, ethyl hex-3-enoate, ethyl hexadecanoate, ethyl trans-2-butenoate, ethyl undecanoate, butyl isovalerate, hexyl isobutyrate, methyl 2-methylbutyrate, hexyl 2-methylbutyrate, triethyl citrate, hexyl isovalerate and methyl 2-methylvalerate as feed additives for all animal species (Text with EEA relevance. )

Commission Implementing Regulation (EU) 2017/53of 14 December 2016concerning the authorisation of butan-1-ol, hexan-1-ol, octan-1-ol, nonan-1-ol, dodecan-1-ol, heptan-1-ol, decan-1-ol, pentan-1-ol, ethanol, acetaldehyde, propanal, butanal, pentanal, hexanal, octanal, decanal, dodecanal, nonanal, heptanal, undecanal, 1,1-diethoxyethane, formic acid, acetic acid, propionic acid, valeric acid, hexanoic acid, octanoic acid, decanoic acid, dodecanoic acid, oleic acid, hexadecanoic acid, tetradecanoic acid, heptanoic acid, nonanoic acid, ethyl acetate, propyl acetate, butyl acetate, hexyl acetate, octyl acetate, nonyl acetate, decyl acetate, dodecyl acetate, heptyl acetate, methyl acetate, methyl butyrate, butyl butyrate, pentyl butyrate, hexyl butyrate, octyl butyrate, ethyl decanoate, ethyl hexanoate, propyl hexanoate, pentyl hexanoate, hexyl hexanoate, methyl hexanoate, ethyl formate, ethyl dodecanoate, ethyl tetradecanoate, ethyl nonanoate, ethyl octanoate, ethyl propionate, methyl propionate, ethyl valerate, butyl valerate, ethyl hex-3-enoate, ethyl hexadecanoate, ethyl trans-2-butenoate, ethyl undecanoate, butyl isovalerate, hexyl isobutyrate, methyl 2-methylbutyrate, hexyl 2-methylbutyrate, triethyl citrate, hexyl isovalerate and methyl 2-methylvalerate as feed additives for all animal species(Text with EEA relevance) THE EUROPEAN COMMISSION,Having regard to the Treaty on the Functioning of the European Union,Having regard to Regulation (EC) No 1831/2003 of the European Parliament and of the Council of 22 September 2003 on additives for use in animal nutritionOJ L 268, 18.10.2003, p. 29., and in particular Article 9(2) thereof,Whereas:(1)Regulation (EC) No 1831/2003 provides for the authorisation of additives for use in animal nutrition and for the grounds and procedures for granting such authorisation. Article 10 of that Regulation provides for the re-evaluation of additives authorised pursuant to Council Directive 70/524/EECCouncil Directive 70/524/EEC of 23 November 1970 concerning additives in feedingstuffs (OJ L 270, 14.12.1970, p. 1)..(2)Butan-1-ol, Hexan-1-ol, octan-1-ol, nonan-1-ol, dodecan-1-ol, heptan-1-ol, decan-1-ol, pentan-1-ol, ethanol, acetaldehyde, propanal, butanal, pentanal, hexanal, octanal, decanal, dodecanal, nonanal, heptanal, undecanal, 1,1-diethoxyethane, formic acid, acetic acid, propionic acid, valeric acid, hexanoic acid, octanoic acid, decanoic acid, dodecanoic acid, oleic acid, hexadecanoic acid, tetradecanoic acid, heptanoic acid, nonanoic acid, ethyl acetate, propyl acetate, butyl acetate, hexyl acetate, octyl acetate, nonyl acetate, decyl acetate, dodecyl acetate, heptyl acetate, methyl acetate, methyl butyrate, butyl butyrate, pentyl butyrate, hexyl butyrate, octyl butyrate, ethyl decanoate, ethyl hexanoate, propyl hexanoate, pentyl hexanoate, hexyl hexanoate, methyl hexanoate, ethyl formate, ethyl dodecanoate, ethyl tetradecanoate, ethyl nonanoate, ethyl octanoate, ethyl propionate, methyl propionate, ethyl valerate, butyl valerate, ethyl hex-3-enoate, ethyl hexadecanoate, ethyl trans-2-butenoate, ethyl undecanoate, butyl isovalerate, hexyl isobutyrate, methyl 2-methylbutyrate, hexyl 2-methylbutyrate, triethyl citrate, hexyl isovalerate and methyl 2-methylvalerate hereinafter referred to as "the substances concerned" were authorised without a time limit in accordance with Directive 70/524/EEC as feed additives for all animal species. Those products were subsequently entered in the Register of feed additives as existing products, in accordance with Article 10(1) of Regulation (EC) No 1831/2003.(3)In accordance with Article 10(2) of Regulation (EC) No 1831/2003 in conjunction with Article 7 thereof, an application was submitted for the re-evaluation of the substances concerned as feed additives for all animal species. The applicant requested those additives to be classified in the additive category "sensory additives". This application was accompanied by the particulars and documents required under Article 7(3) of Regulation (EC) No 1831/2003.(4)The European Food Safety Authority ("the Authority") concluded in its opinion of 12 March 2013EFSA Journal 2013;11(4):3169. that, under the proposed conditions of use in feed, the substances concerned do not have adverse effects on animal health, human health or the environment. The Authority further concluded that those substances are flavouring agents authorised in food for which the efficacy is demonstrated as the functions of the additive applied for feed use and described for food use are similar.(5)The Authority concluded that no safety concerns would arise for users provided that appropriate protective measures are taken. The Authority does not consider that there is a need for specific requirements of post-market monitoring. It also verified the report on the Method of analysis of the feed additives in feed submitted by the Reference Laboratory set up by Regulation (EC) No 1831/2003.(6)The assessment of the substances concerned shows that the conditions for authorisation, as provided for in Article 5 of Regulation (EC) No 1831/2003, are satisfied. Accordingly, the use of those substances should be authorised as specified in the Annex to this Regulation. Maximum recommended contents should be set up for those substances. Those substances may be used within a compound feed subsequently administered via water.(7)Since safety reasons do not require the immediate application of the modifications to the conditions of authorisation for the substances concerned, it is appropriate to allow a transitional period for interested parties to prepare themselves to meet the new requirements resulting from the authorisation.(8)The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on Plants, Animals, Food and Feed,HAS ADOPTED THIS REGULATION:

Article 1AuthorisationThe substances specified in the Annex, belonging to the additive category "sensory additives" and to the functional group "flavouring compounds", are authorised as feed additives in animal nutrition subject to the conditions laid down in that Annex.

Article 2Transitional Measures1.The substances specified in the Annex and premixtures containing those substances, which are produced and labelled before 6 August 2017 in accordance with the rules applicable before 6 February 2017 may continue to be placed on the market and used until the existing stocks are exhausted.2.Compound feed and feed materials containing the substances specified in the Annex which are produced and labelled before 6 February 2018 in accordance with the rules applicable before 6 February 2017 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for food-producing animals.3.Compound feed and feed materials containing the substances specified in the Annex which are produced and labelled before 6 February 2019 in accordance with the rules applicable before 6 February 2017 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for non-food-producing animals.

Article 3Entry into forceThis Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 14 December 2016.For the CommissionThe PresidentJean-Claude JunckerANNEX

Details of the analytical methods are available at the following address of the European Union Reference Laboratory for Feed Additives: https://ec.europa.eu/jrc/en/eurl/feed-additives/evaluation-reportsCategory: Sensory additives. Functional group: Flavouring compounds

Identification number of the additive	Name of the holder of authorisation	Additive	Composition, chemical formula, description, analytical method	Species or category of animal	Maximum age	Minimum content	Maximum content	Other provisions	End of period of authorisation
Identification number of the additive	Name of the holder of authorisation	Additive		Species or category of animal	Maximum age	mg of active substance/kg of complete feedingstuff with a moisture content of 12 %		Other provisions	End of period of authorisation
(1)	(2)	(3)	(4)	(5)	(6)	(7)		(8)	(9)
2b02004	—	Butan-1-ol	Additive compositionButan-1-olCharacterisation of the active substanceButan-1-olProduced by chemical synthesisPurity: min. 99,5 %Chemical formula: C4H10OCAS number 71-36-3FLAVIS 02.004Method of analysisFor the determination of Butan-1-ol in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b02005	—	Hexan-1-ol	Additive compositionHexan-1-olCharacterisation of the active substanceHexan-1-olProduced by chemical synthesisPurity: min. 96,5 %Chemical formula: C6H14OCAS number 111-27-3FLAVIS 02.005Method of analysisFor the determination of Hexan-1-ol in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b02006	—	Octan-1-ol	Additive compositionOctan-1-olCharacterisation of the active substanceOctan-1-olProduced by chemical synthesisPurity: min. 98 %Chemical formula: C8H18OCAS number 111-87-5FLAVIS 02.006Method of analysisFor the determination of Octan-1-ol in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment	6 February 2027
2b02007	—	Nonan-1-ol	Additive compositionNonan-1-olCharacterisation of the active substanceNonan-1-olProduced by chemical synthesisPurity: min. 97 %Chemical formula: C9H20OCAS number 143-08-8FLAVIS 02.007Method of analysisFor the determination of Nonan-1-ol in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment	6 February 2027
2b02008	—	Dodecan-1-ol	Additive compositionDodecan-1-olCharacterisation of the active substanceDodecan-1-olProduced by chemical synthesisPurity: min. 97 %Chemical formula: C12H26OCAS number 112-53-8FLAVIS 02.008Method of analysisFor the determination of Dodecan-1-ol in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b02021	—	Heptan-1-ol	Additive compositionHeptan-1-olCharacterisation of the active substanceHeptan-1-olProduced by chemical synthesisPurity: min. 97 %Chemical formula: C7H16OCAS number 111-70-6FLAVIS 02.021Method of analysisFor the determination of Heptan-1-ol in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b02024	—	Decan-1-ol	Additive compositionDecan-1-olCharacterisation of the active substanceDecan-1-olProduced by chemical synthesisPurity: min. 98 %Chemical formula: C10H22OCAS number 112-30-1FLAVIS 02.024Method of analysisFor the determination of Decan-1-ol in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b02040	—	Pentan-1-ol	Additive compositionPentan-1-olCharacterisation of the active substancePentan-1-olProduced by chemical synthesisPurity: min. 98 %Chemical formula: C5H12OCAS number 71-41-0FLAVIS 02.040Method of analysisFor the determination of Pentan-1-ol in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b02078	—	Ethanol	Additive compositionEthanolCharacterisation of the active substanceEthanolProduced by chemical synthesis or enzymatic fermentation.Purity: min. 95 %Chemical formula: C2H6OCAS number 64-17-5FLAVIS 02.078Method of analysisFor the determination of Ethanol in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b05001	—	Acetaldehyde	Additive compositionAcetaldehydeCharacterisation of the active substanceAcetaldehydeProduced by chemical synthesisPurity: min. 99 %Chemical formula: C2H4OCAS number 75-07-0FLAVIS 05.001Method of analysisFor the determination of Acetaldehyde in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b05002	—	Propanal	Additive compositionPropanalCharacterisation of the active substancePropanalProduced by chemical synthesisPurity: min. 97 %Chemical formula: C3H6OCAS number 123-38-6FLAVIS 05.002Method of analysisFor the determination of Propanal in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b05003	—	Butanal	Additive compositionButanalCharacterisation of the active substanceButanalProduced by chemical synthesisPurity: min. 98 %Chemical formula: C6H8OCAS number 123-72-8FLAVIS 05.003Method of analysisFor the determination of Butanal in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b05005	—	Pentanal	Additive compositionPentanalCharacterisation of the active substancePentanalProduced by chemical synthesisPurity: min. 97 %Chemical formula: C5H10OCAS number 110-62-3FLAVIS 05.005Method of analysisFor the determination of Pentanal in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b05008	—	Hexanal	Additive compositionHexanalCharacterisation of the active substanceHexanalProduced by chemical synthesisPurity: min. 97 %Chemical formula: C6H12OCAS number 66-25-1FLAVIS 05.008Method of analysisFor the determination of Hexanal in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b05009	—	Octanal	Additive compositionOctanalCharacterisation of the active substanceOctanalProduced by chemical synthesisPurity: min. 92 %Chemical formula: C8H16OCAS number 124-13-0FLAVIS 05.009Method of analysisFor the determination of Octanal in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b05010	—	Decanal	Additive compositionDecanalCharacterisation of the active substanceDecanalProduced by chemical synthesisPurity: min. 92 %Chemical formula: C10H20OCAS number 112-31-2FLAVIS 05.010Method of analysisFor the determination of Decanal in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b05011	—	Dodecanal	Additive compositionDodecanalCharacterisation of the active substanceDodecanalProduced by chemical synthesisPurity: min. 92 %Chemical formula: C12H24OCAS number 112-54-9FLAVIS 05.011Method of analysisFor the determination of Dodecanal in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b05025	—	Nonanal	Additive compositionNonanalCharacterisation of the active substanceNonanalProduced by chemical synthesisPurity: min. 92 %Chemical formula: C9H18OCAS number 124-19-6FLAVIS 05.025Method of analysisFor the determination of Nonanal in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b05031	—	Heptanal	Additive compositionHeptanalCharacterisation of the active substanceHeptanalProduced by chemical synthesisPurity: min. 92 %Chemical formula: C7H14OCAS number 111-71-7FLAVIS 05.031Method of analysisFor the determination of Heptanal in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b05034	—	Undecanal	Additive compositionUndecanalCharacterisation of the active substanceUndecanalProduced by chemical synthesisPurity: min. 92 %Chemical formula: C11H22OCAS number 112-44-7FLAVIS 05.034Method of analysisFor the determination of Undecanal in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b06001	—	1,1-Diethoxyethane	Additive composition1,1-DiethoxyethaneCharacterisation of the active substance1,1-DiethoxyethaneProduced by chemical synthesisPurity: min. 95 %Chemical formula: C6H14O2CAS number 105-57-7FLAVIS 06.001Method of analysisFor the determination of 1,1-Diethoxyethane in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b08001	—	Formic acid	Additive compositionFormic acidCharacterisation of the active substanceFormic acidProduced by chemical synthesisPurity: min. 95 %Chemical formula: CH2O2CAS number 64-18-6FLAVIS 08.001Method of analysisFor the determination of Formic acid in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—		1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b08002	—	Acetic acid	Additive compositionAcetic acidCharacterisation of the active substanceAcetic acidProduced by chemical synthesisPurity: min. 99,5 %Chemical formula: C2H4O2CAS number 64-19-7FLAVIS 08.002Method of analysisFor the determination of Acetic acid in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
1k280	—	Propionic acid	Additive compositionPropionic acidCharacterisation of the active substancePropionic acidProduced by chemical synthesisPurity: min. 99,5 %Non-volatile residue ≤ 0,01 % when dried at 140 °C to constant weight.Aldehydes ≤ 0,1 % expressed as formaldehydeChemical formula: C3H6O2CAS number 79-09-4FLAVIS 08.003Method of analysisFor the determination of Propionic acid in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b08007	—	Valeric acid	Additive compositionValeric acidCharacterisation of the active substanceValeric acidProduced by chemical synthesisPurity: min. 99 %Chemical formula: C5H10O2CAS number 109-52-4FLAVIS 08.007Method of analysisFor the determination of Valeric acid in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b08009	—	Hexanoic acid	Additive compositionHexanoic acidCharacterisation of the active substanceHexanoic acidProduced by chemical modification of extracted fatsPurity: min. 98 %Chemical formula: C6H12O2CAS number 142-62-1FLAVIS 08.009Method of analysisFor the determination of Hexanoic acid in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 25 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b08010	—	Octanoic acid	Additive compositionOctanoic acidCharacterisation of the active substanceOctanoic acidProduced by fermentation followed by fractional distillation.Purity: min. 97 %Chemical formula: C8H16O2CAS number 124-07-2FLAVIS 08.010Method of analysisFor the determination of octanoic acid in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b08011	—	Decanoic acid	Additive compositionDecanoic acidCharacterisation of the active substanceDecanoic acidProduced by chemical synthesisPurity: min. 98 %Chemical formula: C10H20O2CAS number 334-48-5FLAVIS 08.011Method of analysisFor the determination of Decanoic acid in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b08012	—	Dodecanoic acid	Additive compositionDodecanoic acidCharacterisation of the active substanceDodecanoic acidProduced by chemical synthesisPurity: min. 90 %Chemical formula: C12H24O2CAS number 143-07-7FLAVIS 08.012Method of analysisFor the determination of Dodecanoic acid in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b08013	—	Oleic acid	Additive compositionOleic acidCharacterisation of the active substanceOleic acidProduced by chemical synthesisPurity: min. 90 %Chemical formula: C18H34O2CAS number 112-80-1FLAVIS 08.013Method of analysisFor the determination of Oleic acid in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b08014	—	Hexadecanoic acid	Additive compositionHexadecanoic acidCharacterisation of the active substanceHexadecanoic acidProduced by chemical synthesisPurity: min. 80 %Chemical formula: C16H32O2CAS number 57-10-3FLAVIS 08.014Method of analysisFor the determination of Hexadecanoic acid in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b08016	—	Tetradecanoic acid	Additive compositionTetradecanoic acidCharacterisation of the active substanceTetradecanoic acidProduced by chemical synthesisPurity: min. 94 %Chemical formula: C14H28O2CAS number 544-63-8FLAVIS 08.016Method of analysisFor the determination of Tetradecanoic acid in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b08028	—	Heptanoic acid	Additive compositionHeptanoic acidCharacterisation of the active substanceHeptanoic acidProduced by chemical synthesisPurity: min. 98 %Chemical formula: C7H14O2CAS number 111-14-8FLAVIS 08.028Method of analysisFor the determination of Heptanoic acid in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b08029	—	Nonanoic acid	Additive compositionNonanoic acidCharacterisation of the active substanceNonanoic acidProduced by chemical synthesisPurity: min. 98 %Chemical formula: C9H18O2CAS number 112-05-0FLAVIS 08.029Method of analysisFor the determination of Nonanoic acid in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09001	—	Ethyl acetate	Additive compositionEthyl acetateCharacterisation of the active substanceEthyl acetateProduced by chemical synthesisPurity: min. 99 %Chemical formula: C4H8O2CAS number 141-78-6FLAVIS 09.001Method of analysisFor the determination of Ethyl acetate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 25 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09002	—	Propyl acetate	Additive compositionPropyl acetateCharacterisation of the active substancePropyl acetateProduced by chemical synthesisPurity: min. 97 %Chemical formula: C5H10O2CAS number 109-60-4FLAVIS 09.002Method of analysisFor the determination of Propyl acetate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09004	—	Butyl acetate	Additive compositionButyl acetateCharacterisation of the active substanceButyl acetateProduced by chemical synthesisPurity: min. 98 %Chemical formula: C6H12O2CAS number 123-86-4FLAVIS 09.004Method of analysisFor the determination of Butyl acetate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09006	—	Hexyl acetate	Additive compositionHexyl acetateCharacterisation of the active substanceHexyl acetateProduced by chemical synthesisPurity: min. 98 %Chemical formula: C8H12O2CAS number 142-92-7FLAVIS 09.006Method of analysisFor the determination of Hexyl acetate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 25 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09007	—	Octyl acetate	Additive compositionOctyl acetateCharacterisation of the active substanceOctyl acetateProduced by chemical synthesisPurity: min. 98 %Chemical formula: C10H20O2CAS number 112-14-1FLAVIS 09.007Method of analysisFor the determination of Octyl acetate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09008	—	Nonyl acetate	Additive compositionNonyl acetateCharacterisation of the active substanceNonyl acetateProduced by chemical synthesisPurity: min. 97 %Chemical formula: C11H22O2CAS number 143-13-5FLAVIS 09.008Method of analysisFor the determination of Nonyl acetate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09009	—	Decyl acetate	Additive compositionDecyl acetateCharacterisation of the active substanceDecyl acetateProduced by chemical synthesisPurity: min. 98 %Chemical formula: C12H24O2CAS number 112-17-4FLAVIS 09.009Method of analysisFor the determination of Decyl acetate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09010	—	Dodecyl acetate	Additive compositionDodecyl acetateCharacterisation of the active substanceDodecyl acetateProduced by chemical synthesisPurity: min. 98 %Chemical formula: C14H28O2CAS number 112-66-3FLAVIS 09.010Method of analysisFor the determination of Dodecyl acetate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09022	—	Heptyl acetate	Additive compositionHeptyl acetateCharacterisation of the active substanceHeptyl acetateProduced by chemical synthesisPurity: min. 97,5 %Chemical formula: C9H18O2CAS number 112-06-1FLAVIS 09.022Method of analysisFor the determination of Heptyl acetate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09023	—	Methyl acetate	Additive compositionMethyl acetateCharacterisation of the active substanceMethyl acetateProduced by chemical synthesisPurity: min. 98 %Chemical formula: C3H6O2CAS number 79-20-9FLAVIS 09.023Method of analysisFor the determination of Methyl acetate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09038	—	Methyl butyrate	Additive compositionMethyl butyrateCharacterisation of the active substanceMethyl butyrateProduced by chemical synthesisPurity: min. 98 %Chemical formula: C5H10O2CAS number 623-42-7FLAVIS 09.038Method of analysisFor the determination of Methyl butyrate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09042	—	Butyl butyrate	Additive compositionButyl butyrateCharacterisation of the active substanceButyl butyrateProduced by chemical synthesisPurity: min. 98 %Chemical formula: C8H16O2CAS number 109-21-7FLAVIS 09.042Method of analysisFor the determination of Butyl butyrate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09044	—	Pentyl butyrate	Additive compositionPentyl butyrateCharacterisation of the active substancePentyl butyrateProduced by chemical synthesisPurity: min. 98 %Chemical formula: C9H18O2CAS number 540-18-1FLAVIS 09.044Method of analysisFor the determination of Pentyl butyrate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09045	—	Hexyl butyrate	Additive compositionHexyl butyrateCharacterisation of the active substanceHexyl butyrateProduced by chemical synthesisPurity: min. 95 %Chemical formula: C10H20O2CAS number 2639-63-6FLAVIS 09.045Method of analysisFor the determination of Hexyl butyrate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09046	—	Octyl butyrate	Additive compositionOctyl butyrateCharacterisation of the active substanceOctyl butyrateProduced by chemical synthesisPurity: min. 97 %Chemical formula: C12H24O2CAS number 110-39-4FLAVIS 09.046Method of analysisFor the determination of Octyl butyrate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09059	—	Ethyl decanoate	Additive compositionEthyl decanoateCharacterisation of the active substanceEthyl decanoateProduced by chemical synthesisPurity: min. 98 %Chemical formula: C12H24O2CAS number 110-38-3FLAVIS 09.059Method of analysisFor the determination of Ethyl decanoate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09060	—	Ethyl hexanoate	Additive compositionEthyl hexanoateCharacterisation of the active substanceEthyl hexanoateProduced by chemical synthesisPurity: min. 98 %Chemical formula: C8H16O2CAS number 123-66-0FLAVIS 09.060Method of analysisFor the determination of Ethyl hexanoate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09061	—	Propyl hexanoate	Additive compositionPropyl hexanoateCharacterisation of the active substancePropyl hexanoateProduced by chemical synthesisPurity: min. 95 %Chemical formula: C9H18O2CAS number 626-77-7FLAVIS 09.061Method of analysisFor the determination of Propyl hexanoate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09065	—	Pentyl hexanoate	Additive compositionPentyl hexanoateCharacterisation of the active substancePentyl hexanoateProduced by chemical synthesisPurity: min. 98 %Chemical formula: C11H22O2CAS number 540-07-8FLAVIS 09.065Method of analysisFor the determination of Pentyl hexanoate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09066	—	Hexyl hexanoate	Additive compositionHexyl hexanoateCharacterisation of the active substanceHexyl hexanoateProduced by chemical synthesisPurity: min. 97 %Chemical formula: C12H24O2CAS number 6378-65-0FLAVIS 09.066Method of analysisFor the determination of Hexyl hexanoate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09069	—	Methyl hexanoate	Additive compositionMethyl hexanoateCharacterisation of the active substanceMethyl hexanoateProduced by chemical synthesisPurity: min. 98 %Chemical formula: C7H14O2CAS number 106-70-7FLAVIS 09.069Method of analysisFor the determination of Methyl hexanoate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09072	—	Ethyl formate	Additive compositionEthyl formateCharacterisation of the active substanceEthyl formateProduced by chemical synthesisPurity: min. 95 %Chemical formula: C3H6O2CAS number 109-94-4FLAVIS 09.072Method of analysisFor the determination of Ethyl formate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09099	—	Ethyl dodecanoate	Additive compositionEthyl dodecanoateCharacterisation of the active substanceEthyl dodecanoateProduced by chemical synthesisPurity: min. 98 %Chemical formula: C14H28O2CAS number 106-33-2FLAVIS 09.099Method of analysisFor the determination of Ethyl dodecanoate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09104	—	Ethyl tetradecanoate	Additive compositionEthyl tetradecanoateCharacterisation of the active substanceEthyl tetradecanoateProduced by chemical synthesisPurity: min. 98 %Chemical formula: C16H32O2CAS number 124-06-1FLAVIS 09.104Method of analysisFor the determination of Ethyl tetradecanoate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09107	—	Ethyl nonanoate	Additive compositionEthyl nonanoateCharacterisation of the active substanceEthyl nonanoateProduced by chemical synthesisPurity: min. 98 %Chemical formula: C11H22O2CAS number 123-29-5FLAVIS 09.107Method of analysisFor the determination of Ethyl nonanoate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09111	—	Ethyl octanoate	Additive compositionEthyl octanoateCharacterisation of the active substanceEthyl octanoateProduced by chemical synthesisPurity: min. 98 %Chemical formula: C10H20O2CAS number 106-32-1FLAVIS 09.111Method of analysisFor the determination of Ethyl octanoate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09121	—	Ethyl propionate	Additive compositionEthyl propionateCharacterisation of the active substanceEthyl propionateProduced by chemical synthesisPurity: min. 97 %Chemical formula: C5H10O2CAS number 105-37-3FLAVIS 09.121Method of analysisFor the determination of Ethyl propionate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09134	—	Methyl propionate	Additive compositionMethyl propionateCharacterisation of the active substanceMethyl propionateProduced by chemical synthesisPurity: min. 95 %Chemical formula: C4H8O2CAS number 554-12-1FLAVIS 09.134Method of analysisFor the determination of Methyl propionate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09147	—	Ethyl valerate	Additive compositionEthyl valerateCharacterisation of the active substanceEthyl valerateProduced by chemical synthesisPurity: min. 98 %Chemical formula: C7H14O2CAS number 539-82-2FLAVIS 09.147Method of analysisFor the determination of Ethyl valerate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09148	—	Butyl valerate	Additive compositionButyl valerateCharacterisation of the active substanceButyl valerateProduced by chemical synthesisPurity: min. 99 %Chemical formula: C9H18O2CAS number 591-68-4FLAVIS 09.148Method of analysisFor the determination of Butyl valerate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09191	—	Ethyl hex-3-enoate	Additive compositionEthyl hex-3-enoateCharacterisation of the active substanceEthyl hex-3-enoateProduced by chemical synthesisPurity: min. 95 %Chemical formula: C8H14O2CAS number 2396-83-0FLAVIS 09.191Method of analysisFor the identification of Ethyl hex-3-enoate in the feed additive and flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be:for pigs and poultry: 1 mg/kg, and for all other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment	6 February 2027
2b09193	—	Ethyl hexadecanoate	Additive compositionEthyl hexadecanoateCharacterisation of the active substanceEthyl hexadecanoateProduced by chemical synthesisPurity: min. 99 %Chemical formula: C18H36O2CAS number 628-97-7FLAVIS 09.193Method of analysisFor the determination of Ethyl hexadecanoate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09248	—	Ethyl trans-2-butenoate	Additive compositionEthyl trans-2-butenoateCharacterisation of the active substanceEthyl trans-2-butenoateProduced by chemical synthesisPurity: min. 98 %Chemical formula: C6H10O2CAS number 623-70-1FLAVIS 09.248Method of analysisFor the identification of Ethyl trans-2-butenoate in the feed additive and flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be:for pigs and poultry: 1 mg/kg, and for all other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09274	—	Ethyl undecanoate	Additive compositionEthyl undecanoateCharacterisation of the active substanceEthyl undecanoateProduced by chemical synthesisPurity: min. 98 %Chemical formula: C13H26O2CAS number 627-90-7FLAVIS 09.274Method of analysisFor the determination of Ethyl undecanoate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09449	—	Butyl isovalerate	Additive compositionButyl isovalerateCharacterisation of the active substanceButyl isovalerateProduced by chemical synthesisPurity: min. 97 %Chemical formula: C9H18O2CAS number 109-19-3FLAVIS 09.449Method of analysisFor the identification of Butyl isovalerate in the feed additive and flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be:for pigs and poultry: 1 mg/kg, and for all other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09478	—	Hexyl isobutyrate	Additive compositionHexyl isobutyrateCharacterisation of the active substanceHexyl isobutyrateProduced by chemical synthesisPurity: min. 98 %Chemical formula: C10H20O2CAS number 2349-07-7FLAVIS 09.478Method of analysisFor the identification of Hexyl isobutyrate in the feed additive and flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be:for pigs and poultry: 1 mg/kg, and for all other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09483	—	Methyl 2-methylbutyrate	Additive compositionMethyl 2-methylbutyrateCharacterisation of the active substanceMethyl 2-methylbutyrateProduced by chemical synthesisPurity: min. 92 %Chemical formula: C6H12O2CAS number 868-57-5FLAVIS 09.483Method of analysisFor the identification of Methyl 2-methylbutyrate in the feed additive and flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be:for pigs and poultry: 1 mg/kg, and for all other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09507	—	Hexyl 2-methylbutyrate	Additive compositionHexyl 2-methylbutyrateCharacterisation of the active substanceHexyl 2-methylbutyrateProduced by chemical synthesisPurity: min. 95 %Chemical formula: C11H22O2CAS number 10032-15-2FLAVIS 09.507Method of analysisFor the identification of Hexyl 2-methylbutyrate in the feed additive and flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be:for pigs and poultry: 1 mg/kg, and for all other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09512	—	Triethyl citrate	Additive compositionTriethyl citrateCharacterisation of the active substanceTriethyl citrateProduced by chemical synthesisPurity: min. 99 %Chemical formula: C12H20O7CAS number 77-93-0FLAVIS 09.512Method of analysisFor the determination of Triethyl citrate in the feed additive and in feed flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09529	—	Hexyl isovalerate	Additive compositionHexyl isovalerateCharacterisation of the active substanceHexyl isovalerateProduced by chemical synthesisPurity: min. 95 %Chemical formula: C11H22O2CAS number 10032-13-0FLAVIS 09.529Method of analysisFor the identification of Hexyl isovalerate in the feed additive and flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be:for pigs and poultry: 1 mg/kg, and for all other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027
2b09549	—	Methyl 2-methylvalerate	Additive compositionMethyl 2-methylvalerateCharacterisation of the active substanceMethyl 2-methylvalerateProduced by chemical synthesisPurity: min. 98 %Chemical formula: C7H14O2CAS number 2177-77-7FLAVIS 09.549Method of analysisFor the identification of Methyl 2-methylvalerate in the feed additive and flavouring premixtures:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.	All animal species	—	—	—	1.The additive shall be incorporated into the feed in the form of a premixture.2.In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.3.The recommended maximum content of the active substance shall be:for pigs and poultry: 1 mg/kg, and for all other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %.4.On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.5.Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.6.For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.	6 February 2027