Commission Delegated Regulation (EU) 2015/2440 of 22 October 2015 establishing a discard plan for certain demersal fisheries in the North Sea and in Union waters of ICES Division IIa
(a) catches with pots (FPO); (b) catches in ICES Division IIIa with bottom trawls (OTB, TBN) with a mesh size of at least 70 mm equipped with a species selective grid with bar spacing of maximum 35 mm; and (c) catches in ICES Division IIIa with bottom trawls (OTB, TBN) with a mesh size of at least 90 mm equipped with a top panel of at least 270 mm mesh size (diamond mesh) or at least 140 mm mesh size (square mesh).
(a) for common sole and haddock combined, up to a maximum of 2 % of the total annual catches of Norway lobster, common sole and haddock in the fishery for Norway lobster by vessels using bottom trawls (OTB, TBN) of mesh size equal to or larger than 70 mm equipped with a species selective grid with bar spacing of maximum 35 mm in ICES Division IIIa; (b) for common sole, up to a maximum of 3 % of the total annual catches of this species by vessels using trammel nets and gill nets (GN, GNS, GND, GNC, GTN, GTR, GEN, GNF) in the ICES Division IIIa, Subarea IV and Union waters of ICES Division IIa; (c) for common sole smaller than 19 cm, up to a maximum of 3,7 % of the total annual catches of this species by vessels using beam trawls (TBB) of mesh size 80-90 mm in the southern part of the North Sea (ICES Subarea IV South of 55/56° N); (d) for common sole below minimum conservation reference size, up to a maximum of 7 % of the total annual catches of this species by vessels using beam trawl (TBB) of mesh size 80-119 mm with increased mesh size in the extension of the beam trawl in ICES Subarea IV; (e) for Norway lobster below minimum conservation reference size, up to a maximum of 6 % of the total annual catches of this species by vessels using bottom trawls (OTB, TBN, OTT, TB) of mesh size 80-99 mm in ICES Subarea IV and Union waters of ICES Division IIa.
(a) total length of 105 mm; (b) carapace length of 32 mm.
(a) a square mesh panel of at least 140 mm; (b) a diamond mesh panel of at least 270 mm placed in a four panel section and mounted with a joining ration of three meshes of 90 mm to one mesh of 270 mm; or (c) a sorting grid with no more than 35 mm bar spacing.
at least 3 metres long, positioned no more than 4 metres from the cod line, and the full width of the top sheet of the trawl (i.e. from selvedge to selvedge).
(a) trawls with at least 70 mm square mesh cod end equipped with a sorting grid with no more than 35 mm bar spacing; (b) trawls with minimum mesh sizes of less than 70 mm when fishing for pelagic or industrial species, provided the catch contains more than 80 % of one or more pelagic or industrial species; (c) trawls with at least 35 mm cod end when fishing for Pandalus, provided the trawl is equipped with a sorting grid with a maximum bar spacing of 19 mm.
constructed with a top panel of a minimum mesh size of 120 mm square mesh, at least 3 metres long, and at least as wide as the width of the sorting grid.
Fishing gear | Mesh size | Species concerned |
---|---|---|
> 100 mm | ||
In ICES Division IIIa: 70-99 mm | ||
32-69 mm | All catches of Northern prawn. | |
> 120 mm | ||
80-119 mm | ||