| CN code | TARIC | Description | Rate of autonomous duty | Date foreseen for mandatory review |
|---|
| "*ex20098973ex20098973 | 1113 | Passion fruit juice and passion fruit juice concentrate, whether or not frozen:- with a Brix value of 13,7 or more but not more than 55,
- of a value of more than EUR 30 per 100 kg net weight,
- in immediate packings of a content of 50 litres or more, and
- with added sugar
for use in the manufacture of products of the food or drink industry | 0 % | 31.12.2019 |
| *ex20098999 | 94 | Coconut water:- unfermented,
- not containing added spirit or sugar, and
- in immediate packing of a content of 50 litres or more
| 0 % | 31.12.2016 |
| *ex22072000ex22072000ex38200000 | 208020 | Feedstock consisting of by weight:- 88 % or more but not more than 92 % of ethanol,
- 2,2 % or more but not more than 2,7 % of monoethylene glycol,
- 1,0 % or more but not more than 1,3 % of methylethylketone,
- 0,36 % or more but not more than 0,40 % of anionic surfactant (ca. 30 % active),
- 0,0293 % or more but not more than 0,0396 % of methyl isopropylketone,
- 0,0195 % or more but not more than 0,0264 % of 5 methyl-3-heptanone,
- 10 ppm or more but not more than 12 ppm of denatonium benzoate (Bitrex),
- not more than 0,01 % of perfumes,
- 6,5 % or more but not more than 8,0 % of water,
for use in the manufacture of screenwash concentrate and other de-icing preparations | 0 % | 31.12.2018 |
| ex27101999 | 20 | Catalytic de-waxed base oil, produced by synthesis from gaseous hydrocarbons followed by a heavy paraffin conversion process (HPC), containing:- not more than 1 mg/kg of sulphur
- more than 99 % by weight of saturated hydrocarbons
- more than 75 % by weight of n- and iso-paraffinic hydrocarbons with a carbon chain length of 18 or more but not more than 50; and
- a kinematic viscosity at 40 °C of more than 6,5 mm2/s, or
- a kinematic viscosity at 40 °C of more than 11 mm2/s with a viscosity index of 120 or more
| 0 % | 31.12.2019 |
| *ex28181091 | 20 | Sintered corundum with a microcrystalline structure, consisting of aluminium oxide (CAS RN 1344-28-1), magnesium aluminate (CAS RN 12068-51-8) and the rare earth aluminates of yttrium, lanthanum and neodymium, with a content by weight (calculated as oxides) of:- 94 % or more, but less than 98,5 % of aluminium oxide,
- 2 % (± 1,5 %) of magnesium oxide,
- 1 % (± 0,6 %) of yttrium oxide,
and:- either 2 % (± 1,2 %) of lanthanum oxide or
- 2 % (± 1,2 %) of lanthanum oxide and neodymium oxide,
with less than 50 % of the total weight having a particle size of more than 10 mm | 0 % | 31.12.2015 |
| ex28276000 | 10 | Sodium iodide (CAS RN 7681-82-5) | 0 % | 31.12.2019 |
| ex28417000 | 30 | Hexaammonium heptamolybdate, anhydrous (CAS RN 12027-67-7) or as tetrahydrate (CAS RN 12054-85-2) | 0 % | 31.12.2019 |
| ex29033990 | 35 | Pentafluoroethane (CAS RN 354-33-6) | 0 % | 31.12.2019 |
| ex29037919 | 10 | Trans-1-chloro-3,3,3-trifluoropropene (CAS RN 102687-65-0) | 0 % | 31.12.2019 |
| ex29049095 | 80 | 1-Chloro-2-nitrobenzene (CAS RN 88-73-3) | 0 % | 31.12.2019 |
| ex29052200 | 10 | Linalool (CAS RN 78-70-6) containing by weight 90,7 % or more of (3R)-(-)-linalool (CAS RN 126-91-0) | 0 % | 31.12.2019 |
| ex29071200 | 30 | p-Cresol (CAS RN 106-44-5) | 0 % | 31.12.2019 |
| ex29072900 | 25 | 4-Hydroxybenzyl alcohol (CAS RN 623-05-2) | 0 % | 31.12.2019 |
| ex29072900 | 65 | 2,2′-Methylenebis(6-cyclohexyl-p-cresol) (CAS RN 4066-02-8) | 0 % | 31.12.2019 |
| ex29096000 | 30 | 3,6,9-Triethyl-3,6,9-trimethyl-1,4,7-triperoxonane (CAS RN 24748-23-0), dissolved in isoparaffinic hydrocarbons | 0 % | 31.12.2019 |
| ex29146990 | 50 | Reaction mass of 2-(1,2-dimethylpropyl)anthraquinone (CAS RN 68892-28-4) and 2-(1,1-dimethylpropyl)anthraquinone (CAS RN 32588-54-8) | 0 % | 31.12.2019 |
| ex29163990 | 18 | 2,4-Dichlorophenylacetic acid (CAS RN 19719-28-9) | 0 % | 31.12.2019 |
| ex29163990 | 23 | (2,4,6-Trimethylphenyl)acetyl chloride (CAS RN 52629-46-6) | 0 % | 31.12.2019 |
| ex29173995 | 50 | 1,4,5,8-Naphthalenetetracarboxylic acid-1,8-monoanhydride (CAS RN 52671-72-4) | 0 % | 31.12.2019 |
| ex29173995 | 60 | Perylene-3,4:9,10-tetracarboxylic dianhydride (CAS RN 128-69-8) | 0 % | 31.12.2019 |
| ex29182900 | 70 | 3,5-Diiodosalicylic acid (CAS RN 133-91-5) | 0 % | 31.12.2019 |
| ex29183000 | 70 | 2-[4-Chloro-3-(chlorosulphonyl)benzoyl]benzoic acid (CAS RN 68592-12-1) | 0 % | 31.12.2019 |
| ex29189990 | 55 | Stearyl glycyrrhetinate (CAS RN 13832-70-7) | 0 % | 31.12.2019 |
| ex29189990 | 65 | Acetic acid, difluoro[1,1,2,2-tetrafluoro-2-(pentafluoroethoxy)ethoxy]-, ammonium salt (CAS RN 908020-52-0) | 0 % | 31.12.2019 |
| ex29189990 | 75 | 3,4-Dimethoxybenzoic acid (CAS RN 93-07-2) | 0 % | 31.12.2019 |
| ex29214200 | 40 | Sodium sulphanilate (CAS RN 515-74-2), also in form of its mono- or dihydrates (CAS RN 12333-70-0 or 6106-22-5) | 0 % | 31.12.2019 |
| ex29224985 | 55 | (E)-Ethyl 4-(dimethylamino)but-2-enoate maleate (CUS 0138070-7) | 0 % | 31.12.2019 |
| ex29239000 | 20 | Tetramethylammonium hydrogen phthalate (CAS RN 79723-02-7) | 0 % | 31.12.2019 |
| ex29241900 | 35 | Acetamide (CAS RN 60-35-5) | 0 % | 31.12.2019 |
| ex29242998 | 23 | Benalaxyl-M (ISO) (CAS RN 98243-83-5) | 0 % | 31.12.2019 |
| ex29242998 | 33 | N-(4-Amino-2-ethoxyphenyl)acetamide (CAS RN 848655-78-7) | 0 % | 31.12.2019 |
| ex29242998 | 73 | Napropamide (ISO) (CAS RN 15299-99-7) | 0 % | 31.12.2019 |
| *ex29270000 | 35 | C,C′-Azodi(formamide) (CAS RN 123-77-3) in the form of yellow powder with a decomposition temperature of 180 °C or more but not more than 220 °C used as a foaming agent in the manufacture of thermoplastic resins, elastomer and cross-linked polythene foam | 0 % | 31.12.2019 |
| ex29280090 | 13 | Cymoxanil (ISO) (CAS RN 57966-95-7) | 0 % | 31.12.2019 |
| ex29280090 | 18 | Acetone oxime (CAS RN 127-06-0) of a purity by weight of 99 % or more | 0 % | 31.12.2019 |
| ex29309099 | 16 | 3-(Dimethoxymethylsilyl)-1-propanethiol (CAS RN 31001-77-1) | 0 % | 31.12.2019 |
| ex29309099 | 21 | [2,2′-Thio-bis(4-tert-octylphenolato)]-n-butylamine nickel (CAS RN 14516-71-3) | 0 % | 31.12.2016 |
| ex29309099 | 27 | 2-[(4-Amino-3-methoxyphenyl)sulphonyl]ethyl hydrogen sulphate (CAS RN 26672-22-0) | 0 % | 31.12.2019 |
| ex29309099 | 33 | 2-Amino-5-{[2-(sulfooxy)ethyl]sulfonyl}benzenesulfonic acid (CAS RN 42986-22-1) | 0 % | 31.12.2019 |
| ex29333999 | 11 | 2-(Chloromethyl)-4-(3-methoxypropoxy)-3-methylpyridine hydrochloride (CAS RN 153259-31-5) | 0 % | 31.12.2019 |
| ex29333999 | 21 | Boscalid (ISO) (CAS RN 188425-85-6) | 0 % | 31.12.2019 |
| ex29333999 | 31 | 2-(Chloromethyl)-3-methyl-4-(2,2,2-trifluoroethoxy)pyridine hydrochloride (CAS RN 127337-60-4) | 0 % | 31.12.2019 |
| ex29335995 | 10 | 6-Amino-1,3-dimethyluracil (CAS RN 6642-31-5) | 0 % | 31.12.2019 |
| ex29336980 | 75 | Metamitron (ISO) (CAS RN 41394-05-2) | 0 % | 31.12.2019 |
| ex29339980 | 11 | Fenbuconazole (ISO) (CAS RN 114369-43-6) | 0 % | 31.12.2019 |
| ex29339980 | 12 | Myclobutanil (ISO) (CAS RN 88671-89-0) | 0 % | 31.12.2019 |
| ex29339980 | 19 | 2-(2,4-Dichlorophenyl)-3-(1H-1,2,4-triazol-1-yl)propan-1-ol (CAS RN 112281-82-0) | 0 % | 31.12.2019 |
| ex29349990 | 10 | Fluralaner (INN) (CAS RN 864731-61-3) | 0 % | 31.12.2019 |
| ex29349990 | 16 | Difenoconazole (ISO) (CAS RN 119446-68-3) | 0 % | 31.12.2019 |
| ex29349990 | 19 | 2-[4-(Dibenzo[b,f][1,4]thiazepin-11-yl)piperazin-1-yl] ethanol (CAS RN 329216-67-3) | 0 % | 31.12.2019 |
| ex29350090 | 10 | Florasulam (ISO) (CAS RN 145701-23-1) | 0 % | 31.12.2019 |
| ex32041200 | 60 | Colourant C.I. Acid Red 52 (CAS RN 3520-42-1) and preparations based thereon with a colourant C.I. Acid Red 52 content of 97 % or more by weight | 0 % | 31.12.2019 |
| ex32041300 | 50 | Colourant C.I Basic Violet 11 (CAS RN 2390-63-8) and preparations based thereon with a colourant C.I Basic Violet 11 content of 90 % or more by weight | 0 % | 31.12.2019 |
| ex32041300 | 60 | Colourant C.I Basic Red 1:1 (CAS RN 3068-39-1) and preparations based thereon with a colourant C.I Basic Red 1:1 content of 90 % or more by weight | 0 % | 31.12.2019 |
| ex32041400 | 10 | Colourant C.I. Direct Black 80 (CAS RN 8003-69-8) and preparations based thereon with a colourant C.I. Direct Black 80 content of 90 % or more by weight | 0 % | 31.12.2019 |
| ex32041400 | 20 | Colourant C.I. Direct Blue 80 (CAS RN 12222-00-3) and preparations based thereon with a colourant C.I. Direct Blue 80 content of 90 % or more by weight | 0 % | 31.12.2019 |
| ex32041400 | 30 | C.I. Colourant Direct Red 23 (CAS RN 3441-14-3 ) and preparations based thereon with a colourant C.I. Direct Red 23 content of 90 % or more by weight | 0 % | 31.12.2019 |
| ex32041700 | 45 | Colourant C.I. Pigment Yellow 174 (CAS RN 4118-16-5), highly resinated pigment (approx. 35 % disproportionate resin), with a purity of 98 % by weight or more, in the form of extruded beads, with a moisture content of not more than 1 % by weight | 0 % | 31.12.2018 |
| ex32041700 | 67 | Colourant C.I. Pigment Red 57:1 (CAS RN 5281-04-9) with a purity of 98 % by weight or more, in the form of extruded beads, with a moisture content of not more than 1 % by weight. | 0 % | 31.12.2018 |
| ex32049000 | 10 | Colourant C.I Solvent Yellow 172 (also known as C.I. Solvent Yellow 135) (CAS RN 68427-35-0) and preparations based thereon with a colourant C.I Solvent Yellow 172 (also known as C.I. Solvent Yellow 135) content of 90 % or more by weight | 0 % | 31.12.2019 |
| ex32121000ex76072090 | 1030 | Metallised film:- consisting of eight or more layers of aluminium (CAS RN 7429-90-5) of a purity of 99,8 % or more,
- with an optical density of each aluminium layer of not more than 3.0,
- with each aluminium layer separated by a resin layer,
- on a carrier film of PET, and
- on rolls of up to 50000 metres in length
| 0 % | 31.12.2019 |
| ex38089420 | 30 | Bromochloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 32718-18-6) containing:- 1,3-dichloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 118-52-5),
- 1,3-dibromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 77-48-5),
- 1-bromo,3-chloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 16079-88-2), and
- 1-chloro,3-bromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 126-06-7)
| 0 % | 31.12.2019 |
| ex38112100 | 23 | Additives containing:- polyisobutene succinimide derived from reaction of polyethylenepropylamide with polyisobutenyl succinic anhydride (CAS RN 84605-20-9),
- more than 31,9 % but not more than 43,3 % by weight of mineral oils, and
- not more than 0,05 % by weight chlorine,
having a total base number (TBN) greater than 20,for use in the manufacture of additives blends for lubricating oils | 0 % | 31.12.2019 |
| *ex38112100 | 53 | Additives containing:- overbased calcium petroleum sulphonates (CAS 68783-96-0) with a sulphonate content by weight of 15 % or more, but not more than 30 % and
- by weight more than 40 % but not more than 60 % of mineral oil,
having a total base number (TNB) of 280 or more but not more than 420,for use in the manufacture of lubricating oils | 0 % | 31.12.2019 |
| *ex38112100 | 73 | Additives containing:- borated succinimide compounds (CAS RN 134758-95-5), and
- mineral oils,
having a total base number (TBN) greater than 40,for use in the manufacture of additive mixtures for lubricating oils | 0 % | 31.12.2018 |
| ex38123029 | 10 | 4,4′-Isopropylidenediphenol C12-15 alcohol phosphite containing by weight 1 % or more but not more than 3 % of bisphenol A (CAS RN 96152-48-6) | 0 % | 31.12.2019 |
| ex38249092 | 82 | T-butylchloride dimethylsilane (CAS RN 18162-48-6) solution in toluene | 0 % | 31.12.2019 |
| *ex38249092 | 83 | Preparation consisting of two or more of the following glycols:- dipropylene glycol,
- tripropylene glycol,
- tetrapropylene glycol or
- pentapropylene glycol
| 0 % | 31.12.2017 |
| *ex38249093 | 46 | Sodium hydrogen 3-aminonaphthalene-1,5-disulfonate (CAS RN 4681-22-5) containing by weight:- not more than 20 % of disodium sulphate, and
- not more than 5 % of sodium chloride
| 0 % | 31.12.2015 |
| *ex39011010ex39019090 | 2050 | High-flow linear low-density polyethylene-1-butene (LLDPE) (CAS RN 25087-34-7) in form of powder, with:- a melt flow rate (MFR 190 °C/2,16 kg) of 16 g/10 min or more, but not more than 24 g/10 min,
- a density (ASTM D 1505) of 0,922 g/cm3 or more, but not more than 0,926 g/cm3, and
- a vicat softening temperature of min. 94 °C
| 0 % | 31.12.2019 |
| ex39011010 | 30 | Linear low-density polyethylene (LLDPE) (CAS RN 9002-88-4) in the form of powder, with:- not more than 5 % by weight of comonomer,
- a melt flow rate of 15 g/10 min or more, but not more than 60 g/10 min, and
- a density of 0,922 g/cm3 or more, but not more than 0,928 g/cm3
| 0 % | 31.12.2018 |
| *ex39019090 | 60 | Linear low-density polyethylene (LLDPE) (CAS RN 9002-88-4) in the form of powder, with:- more than 5 %, but not more than 8 % by weight of comonomer,
- a melt flow rate of 15 g/10 min or more, but not more than 60 g/10 min, and
- a density of 0,922 g/cm3 or more, but not more than 0,928 g/cm3
| 0 % | 31.12.2018 |
| *ex39031900 | 40 | Crystalline polystyrene with:- a melting point of 268 °C or more but not more than 272 °C, and
- a setting point of 232 °C or more but not more than 247 °C,
whether or not containing additives and filling material | 0 % | 31.12.2016 |
| ex39039090 | 45 | Preparation, in form of powder, containing by weight:- 86 % or more but not more than 90 % of styrene-acrylic-copolymer and
- 9 % or more but not more than 11 % of fatty acid ethoxylate (CAS RN 9004-81-3)
| 0 % | 31.12.2019 |
| ex39039090 | 55 | Preparation, in form of an aqueous suspension, containing by weight:- 25 % or more but not more than 26 % of styrene-acrylic-copolymer and
- 5 % or more but not more than 6 % of glycol
| 0 % | 31.12.2019 |
| ex39089000 | 70 | Copolymer containing:- 1,3-benzenedimethanamine (CAS RN 1477-55-0) and
- adipic acid (CAS RN 124-04-9),
whether or not containing isophthalic acid (CAS RN 121-91-5) | 0 % | 31.12.2019 |
| ex39119019 | 60 | Formaldehyde, polymer with 1,3-dimethylbenzene and tert-butyl-phenol (CAS RN 60806-48-6) | 0 % | 31.12.2019 |
| ex39119019 | 70 | Preparation containing:- cyanic acid, C,C′-((1-methylethylidene)di-4,1-phenylene) ester, homopolymer (CAS RN 25722-66-1), and
- 1,3-bis(4-cyanophenyl)propane (CAS RN 1156-51-0),
in a solution of butanone (CAS RN 78-93-3) with a content of less than 50 % by weight | 0 % | 31.12.2019 |
| *ex39122019 | 10 | Nitrocellulose (CAS RN 9004-70-0) | 0 % | 31.12.2016 |
| *ex39191080ex39199000ex39206100 | 573030 | Reflecting sheet:- of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern
- covered on one or both sides with one or more layers of plastic or metallisation, and
- whether or not covered on one side with a self-adhesive layer and a release sheet
| 0 % | 31.12.2018 |
| *ex39191080ex39199000 | 6746 | Self-adhesive reflecting sheet whether or not in segmented pieces:- showing a regular pattern,
- with or without an application tape layer,
- consisting of a film of acrylic polymer followed by a layer of poly(methyl methacrylate) or polycarbonate containing microprisms,
- whether or not containing an additional layer of polyester and an adhesive with a final release sheet
| 0 % | 31.12.2018 |
| *ex39199000 | 48 | Transparent poly(vinyl chloride) film:- coated on one side with an acrylic UV-sensitive adhesive with an adhesive strength of 70 N/m or more, which is reduced upon irradiation,
- with a polyester liner
- with a total thickness without release liner of 78 μm or more
| 0 % | 31.12.2019 |
| ex39201028 | 30 | Printed embossed film:- of polymers of ethylene
- having a gravity of 0,94 g/cm3 or more
- of a thickness of 0,019 mm ± 0,003 mm
- with permanent graphics consisting of two different alternating designs whose individual length is 525 mm or more
| 0 % | 31.12.2019 |
| *ex39206219 | 60 | Poly(ethylene terephtalate) film:- of a thickness of not more than 20 μm,
- coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica or aluminium oxide has been dispersed and of a thickness of not more than 2 μm
| 0 % | 31.12.2017 |
| ex39206900 | 50 | Monolayer, biaxially oriented film:- composed of more than 85 % by weight of poly(lactic acid) and not more than 10,50 % by weight of modified poly(lactic acid) based polymer, poly-glycol ester and talc,
- having a thickness of 20 μm or more but not more than 120 μm
- biodegradable and compostable (as determined by the method EN 13432)
| 0 % | 31.12.2019 |
| ex39206900 | 60 | Monolayer, transverse oriented, shrink film:- composed of more than 80 % by weight of poly(lactic acid) and not more than 15,75 % by weight of additives of modified poly(lactic acid),
- having a thickness of 45 μm or more but not more than 50 μm,
- biodegradable and compostable (as determined by the method EN 13432)
| 0 % | 31.12.2019 |
| ex39207910 | 10 | Sheets of painted vulcanised fibre-board with a thickness of not more than 1,5 mm | 0 % | 31.12.2019 |
| ex39209928 | 65 | Matt, thermoplastic polyurethane foil in rolls with:- a width of 1640 mm (± 10 mm),
- a gloss of 3,3 degrees or more but not more than 3,8 (as determined by the method ASTM D2457),
- a surface roughness of 1,9 Ra or more but not more than 2,8 Ra (as determined by the method ISO 4287),
- a thickness of more than 365 μm but not more than 760 μm,
- a hardness of 90 (± 4) (as determined by the method: Shore A (ASTM D2240)),
- an elongation to break of 470 % (as determined by the method: EN ISO 527)
| 0 % | 31.12.2019 |
| ex39209928 | 75 | Thermoplastic polyurethane foil in rolls with:- a width of more than 900 mm but not more than 1016 mm,
- a matt finish,
- a thickness of 0,43 mm (± 0,03 mm),
- an elongation to break of 420 % or more but not more than 520 %,
- a tensile strength of 55 N/mm2 (± 3) (as determined by the method EN ISO 527)
- a hardness of 90 (± 4) (as determined by the method: Shore A [ASTM D2240]),
- wrinkle inside (waves) of 6,35 mm,
- a flatness of 0,025 mm
| 0 % | 31.12.2019 |
| ex39219060 | 30 | Heat-, infra- and UV insulating poly(vinyl butyral) film:- laminated with a metal layer with a thickness of 0,05 mm (± 0,01 mm),
- containing by weight 29,75 % or more but not more than 40,25 % of triethyleneglycol di (2-ethyl hexanoate) as plasticizer,
- with a light transmission of 70 % or more (as determined by the ISO 9050 standard),
- with an UV transmission of 1 % or less (as determined by the ISO 9050 standard),
- with a total thickness of 0,43 mm (± 0,043 mm)
| 0 % | 31.12.2019 |
| ex68042100 | 10 | Discs:- of synthetic diamonds which are agglomerated with a metal alloy, ceramic alloy or plastic alloy,
- having a self-sharpening effect by constant release of the diamonds,
- suitable for abrasive cutting of wafers,
- whether or not containing a hole in the centre,
- whether or not on a support
| 0 % | 31.12.2019 |
| ex74091100ex74091900ex74101100 | 101020 | Refined copper foil and strips of a thickness of not more than 400 μm | 0 % | 31.12.2019 |
| *ex76061292ex76071190 | 3050 | Aluminium and magnesium alloy strip or foil:- in rolls,
- of a thickness of 0,14 mm or more but not more than 0,40 mm,
- a width of 12,5 mm or more but not more than 359 mm,
- a tensile strength of 285 N/mm2 or more, and
- an elongation at break of 1 % or more, and
containing by weight:- 93,3 % or more of aluminium,
- 0,8 % or more but not more than 5 % of magnesium, and
- not more than 1,8 % of other elements
| 0 % | 31.12.2017 |
| *ex76071190 | 60 | Plain aluminium foil with the following parameters:- an aluminium content of 99,98 % or more,
- a thickness of 0,070 mm or more but not more than 0,125 mm,
- with a cubic texture,
of a kind used for high voltage etching | 0 % | 31.12.2016 |
| ex76169910 | 30 | Aluminium engine bracket, with dimensions of:- height of more than 10 mm but not more than 200 mm,
- width of more than 10 mm but not more than 200 mm,
- length of more than 10 mm but not more than 200 mm,
equipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics:- internal porosity not more than 1 mm,
- outer porosity not more than 2 mm,
- Rockwell hardness HRB 10 or more,
of a kind used in the production of suspensions systems for engines in motor vehicles | 0 % | 31.12.2019 |
| *ex81089030 | 50 | Titanium-aluminium-vanadium alloy (TiAl6V4) wire, complying with AMS standards 4928, 4965 and 4967 | 0 % | 31.12.2015 |
| ex81089050 | 80 | Plates, sheets, strips and foil of non-alloyed titanium:- of a width of more than 750 mm,
- of a thickness of not more than 3 mm
| 0 % | 31.12.2019 |
| ex81089050 | 85 | Strip or foil of non-alloyed titanium:- containing more than 0,07 % by weight of oxygen (O2),
- of a thickness of 0,4 mm or more but not more than 2,5 mm,
- conforming to the Vickers hardness HV1 standard of not more than 170,
of a kind used in the manufacture of welded tubes for nuclear power plant condensers | 0 % | 31.12.2019 |
| ex84099900ex84119900 | 3070 | Spiral-shaped gas turbine turbocharger component:- with a heat-resistance of not more than 1050 °C,
- with a turbine wheel hole diameter of 30 mm or more, but not more than 110 mm,
- whether or not with an engine exhaust manifold
| 0 % | 31.12.2018 |
| ex84119900 | 60 | Wheel-shaped gas turbine component with blades, of a kind used in turbochargers:- of a precision-cast nickel based alloy complying with standard DIN G- NiCr13Al6MoNb or DIN G- NiCr13Al16MoNb or DIN NiCo10W10Cr9AlTi or AMS AISI:686,
- with a heat-resistance of not more than 1100 °C,
- with a diameter of 30 mm or more, but not more than 100 mm,
- with a height of 20 mm or more, but not more than 70 mm
| 0 % | 31.12.2017 |
| ex84798997 | 70 | Machine to accurately align and attach lenses into a camera assembly in five axis alignment capability and fix them in position with a two part cure epoxy | 0 % | 31.12.2019 |
| ex84798997 | 80 | Machinery for the production of a sub assembled component (anode conductor and the negative closing cap) for the manufacture of AA and/or AAA alkaline batteries | 0 % | 31.12.2019 |
| *ex84833038 | 40 | Cylindrical bearing housing:- of precision-cast grey cast iron complying with standard DIN EN 1561,
- with oil chambers,
- without bearings,
- with a diameter of 50 mm or more, but not more than 250 mm,
- with a height of 40 mm or more, but not more than 150 mm,
- whether or not with water chambers and connectors
| 0 % | 31.12.2017 |
| ex85013200ex85013300 | 6015 | Traction motor, with:- a torque output of 200 Nm or more but not more than 300 Nm,
- a power output of 50 kW or more but not more than 100 kW,
- a speed of not more than 12500 rpm,
for use in the manufacture of electric vehicles | 0 % | 31.12.2019 |
| ex85044088 | 30 | DC to AC inverter for use in traction motor control for use in the manufacture of electric vehicles | 0 % | 31.12.2019 |
| ex85044090 | 80 | Power converter containing:- a DC to DC converter,
- a charger of a capacity of not more than 7 kW,
- switching functions,
for use in the manufacture of electric vehicles | 0 % | 31.12.2019 |
| ex85059020 | 30 | Coil for an electromagnetic valve, with:- a plunger,
- a diameter of 12,9 mm (± 0,1),
- a height without plunger of 20,5 mm (± 0,1),
- an electric cable with connector, and
in a cylindrical metal housing | 0 % | 31.12.2019 |
| *ex85071020 | 30 | Lead-acid accumulators or modules, of a kind used for starting piston engines, with:- a nominal capacity of not more 32 Ah,
- a length of not more than 205 mm,
- a width of not more than 130 mm and
- a height of not more than 190 mm,
for use in the manufacture of articles of CN code 8711 | 0 % | 31.12.2018 |
| *ex85076000 | 85 | Rectangular modules for incorporation in lithium-ion rechargeable batteries:- of a length of 312 mm or more, but not more than 350 mm,
- of a width of 79,8 mm or more, but not more than 225 mm,
- of a height of 35 mm or more, but not more than 168 mm,
- of a weight of 3,95 kg or more, but not more than 8,56 kg,
- with a rating of 66,6 Ah or more, but not more than 129 Ah
| 0 % | 31.12.2015 |
| ex85076000 | 87 | Lithium-ion rechargeable batteries, with:- a length of 1475 mm or more, but not more than 2820 mm,
- a width of 935 mm or more, but not more than 1660 mm,
- a height of 260 mm or more, but not more than 600 mm,
- a weight of 320 kg or more, but not more than 700 kg,
- a nominal capacity of 18,4 Ah or more, but not more than 130 Ah,
put up in packs of 12 or 16 modules | 0 % | 31.12.2017 |
| *ex85113000 | 30 | Igniter integrated coil assembly with:- an igniter,
- a coil on plug assembly with an integrated mounting bracket,
- a housing,
- a length of 90 mm or more but not more than 200 mm (± 5 mm),
- an operating temperature of – 40 °C or more but not more than 130 °C,
- a voltage of 10,5 V or more, but not more than 16 V
| 0 % | 31.12.2019 |
| ex85122000 | 10 | Fog lamps with galvanised inner surface, containing:- plastic holder with four or more brackets,
- one or more, but not more than two 12 V bulbs,
- connection cable with a connector,
- plastic cover,
for use in the manufacture of goods of Chapter 87 | 0 % | 31.12.2019 |
| ex85122000 | 20 | Information screen displaying at least time, date and status of safety features in a vehicle with an operating voltage of 12 V or more, but not more than 14,4 V, of a kind used in the manufacture of goods of Chapter 87 | 0 % | 31.12.2019 |
| ex85123090 | 10 | Horn assembly operating on piezomechanical principle for generating a specific sound signal, with a voltage of 12 V, comprising:- coil,
- magnet,
- metal membrane,
- connector,
- holder,
of a kind used in the manufacture of goods of Chapter 87 | 0 % | 31.12.2019 |
| ex85129090 | 10 | Ultrasonic parking sensor with:- printed circuit board inside the housing and sensor cell on the cover connected through terminal pins,
- an operating voltage of not more than 12 V,
- ability to receive and transmit signals processed by the control unit,
of a kind used in the manufacture of goods of Chapter 87 | 0 % | 31.12.2019 |
| ex85142080ex85165000ex85166080 | 101010 | Cavity assembly comprising at least:- a transformer with an input of not more than 240 V and an output of not more than 3000 W,
- an AC or DC fan motor with an output of not more than 42 watts,
- a housing made of stainless steel,
with or without a magnetron of a microwave output power of not more than 900 W.for use in the manufacture of built-in products of CN codes 85142080, 85165000 and 85166080 | 0 % | 31.12.2019 |
| ex85169000 | 80 | Door assembly incorporating a capacitive sealing element and wavelength choke for use in the manufacture of built-in products of CN codes 85142080, 85165000 and 85166080 | 0 % | 31.12.2019 |
| ex85189000 | 80 | Integrated car loudspeaker housing, consisting of:- a speaker frame and magnet system holder with a protective coating and
- an embossed anti-dust cloth
| 0 % | 31.12.2019 |
| *ex85258019 | 60 | Image scanning cameras, using:- a "Dynamic"- or "Static overlay lines" system,
- an output NTSC video signal,
- a voltage of 6,5 V or more,
- an illuminance of 0,5 lux or more
| 0 % | 31.12.2019 |
| *ex85279199ex85299065 | 2085 | Assembly consisting of at least:- an audio frequency amplifier unit, comprising at least an audio frequency amplifier and a sound generator,
- a transformer and
- a radio broadcast receiver
for use in the manufacture of consumer electronic products | 0 % | 31.12.2019 |
| ex85291080 | 70 | Ceramic filters:- with an applicable frequency range of 10 kHz or more but no more than 100 MHz,
- with a housing of ceramic plates provided with electrodes,
of a kind used in electrical-mechanical transducer or resonator in audio visual and communication equipment | 0 % | 31.12.2019 |
| ex85299065 | 80 | Tuner transforming high-frequency signals into digital signal, for use in the manufacture of products falling under heading 8527 | 0 % | 31.12.2019 |
| *ex85299092ex85489090 | 1560 | LCD modules:- solely consisting of one or more TFT glass or plastic cells,
- not combined with touch screen facilities,
- with one or more printed circuits boards with control electronics for pixel addressing only,
- with or without backlight unit and
- with or without inverters
| 0 % | 31.12.2018 |
| ex85371099 | 40 | Electronic control unit for monitoring car vehicle tyre pressure comprising plastic box with printed circuit board inside and with or without metal holder, of:- a length of 50 mm or more, but not more than 120 mm,
- a width of 20 mm or more but not more than 40 mm,
- a height of 30 mm or more, but not more than 120 mm,
of a kind used in the manufacture of goods of Chapter 87 | 0 % | 31.12.2019 |
| ex85371099 | 50 | Electronic control unit BCM (Body Control Module) comprising:- plastic box with printed circuit board and metal holder,
- with voltage of 9 V or more, but not more than 16 V,
- able to control, evaluate and manage functions of assisting services in an automobile, at least wiper timing, window heating, interior lighting, seat belt reminder,
of a kind used in the manufacture of goods of Chapter 87 | 0 % | 31.12.2019 |
| ex85371099 | 60 | Electronic assembly consisting of:- a microprocessor,
- light-emitting diode (LED) or liquid crystal display (LCD) indicators,
- electronic components mounted on a printed circuit,
for use in the manufacture of built-in products of CN codes 85142080, 85165000 and 85166080 | 0 % | 31.12.2019 |
| ex85444991 | 10 | Insulated copper electrical wires:- with individual conductor wires of a diameter exceeding 0,51 mm,
- for a voltage of not more than 1000 V,
for use in the manufacture of automotive cable harnesses | 0 % | 31.12.2019 |
| *ex85489090 | 65 | LCD modules:- solely consisting of one or more TFT glass or plastic cells,
- combined with touch screen facilities,
- with one or more printed circuits boards with control electronics for pixel addressing only,
- with or without backlight unit and
- with or without inverters
| 0 % | 31.12.2018 |
| ex87083010 | 10 | Brake unit assembly comprising- electric control brake,
- stroke sensor,
- VDC (vehicle dynamic control) and
- backup power source,
for use in the manufacture of vehicles | 0 % | 31.12.2019 |
| ex87083091 | 20 | Non-asbestos organic brake pads with friction material mounted to the band steel back plate for use in the manufacture of goods of Chapter 87 | 0 % | 31.12.2019 |
| ex87083091 | 30 | Body of disc type brake in BIR ("Ball in Ramp") or EPB ("Electronic Parking Brake") version containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of Chapter 87 | 0 % | 31.12.2019 |
| ex87089135 | 10 | Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of Chapter 87 | 0 % | 31.12.2019 |
| ex87089435 | 20 | Rack steering gear in aluminium housing with homokinetic hinges of a kind used in the manufacture of goods of Chapter 87 | 0 % | 31.12.2019 |
| ex90021100 | 80 | Lens assembly with:- a field of view range of 58,5 deg or more, but not more than 194 deg,
- a focal length of 1,16 mm or more, but not more than 3,88 mm,
- a relative aperture of F/2.0 or more but not more than 2.6,
- a diameter of 17 mm or more but not more than 18,5 mm,
for use in the manufacture of CMOS automotive cameras | 0 % | 31.12.2019 |
| ex90291000 | 30 | Speed sensor using the Hall effect for measuring wheels rotation in a motor vehicle equipped with plastic housing and attached to connecting cable with a joining connector and mounting holders of a kind used in the manufacture of goods of Chapter 87 | 0 % | 31.12.2019 |
| ex90292031ex90299000 | 1020 | Clustered instrument panel with the microprocessor control board, stepping motors and LED indicators showing at least:- speed,
- engine revolutions,
- engine temperature,
- the fuel level
communicating via CAN-BUS and K-LINE protocols, of a kind used in the manufacture of goods of Chapter 87 | 0 % | 31.12.2019 |
| ex90318034 | 50 | Programmable dual linear Hall sensor:- consisting of two non-electrically connected integrated circuits, a top die and a bottom die,
- positioned on the top and bottom of a lead frame,
- in a semiconductor housing,
for use as a means for measuring angles, positions and currents in cars | 0 % | 31.12.2019 |
| ex90318038 | 50 | Gyroscopic sensor for measuring lateral acceleration of the vehicle vertical axis comprising:- a piezoelectric crystal for generating an electrical potential during deformation and
- a plastic box with metal holder,
of a kind used in the manufacture of goods of Chapter 87 | 0 % | 31.12.2019 |
| ex90318038 | 60 | Congestion sensor, printed circuit board and connector, moulded together in plastic, for monitoring congestion "G" and providing the values for further evaluation of triggering the airbags, of a kind used in the manufacture of goods of Chapter 87 | 0 % | 31.12.2019 |
| ex90318098 | 30 | Functional Test Machine for calibrating and image quality testing lenses in automotive cameras | 0 % | 31.12.2019 |