Directive 2014/32/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of measuring instruments (recast) Text with EEA relevance
Corrected by
Corrigendum to Directive 2014/32/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of measuring instruments(Official Journal of the European Union L 96 of 29 March 2014)On page 163, Article 30(1):for:"1.An accredited in-house body may be used to carry out conformity assessment activities for the undertaking of which it forms a part for the purpose of implementing the procedures set out in point 2 (Module A2) and point 5 (Module C2) of Annex II. That body shall constitute a separate and distinct part of the undertaking and shall not participate in the design, production, supply, installation, use or maintenance of the measuring instruments it assesses.",read:"1.An accredited in-house body may be used to carry out conformity assessment activities for the undertaking of which it forms a part for the purpose of implementing the procedures set out in Module A2 and Module C2 of Annex II. That body shall constitute a separate and distinct part of the undertaking and shall not participate in the design, production, supply, installation, use or maintenance of the measuring instruments it assesses.";on page 206, Annex IV, Part I, point 4.1:for:"4.1.Class 1,5 $3",read:"4.1.Class 1,5 meters";on page 207, Annex IV, Part I, point 4.2:for:"4.2.Class 1,0 $3",read:"4.2.Class 1,0 meters";on page 208, Annex IV, Part III, point 10(a) and (b):for:"10.(a)Where a Member State imposes measurement of residential use, it shall allow such measurement to be performed by means of any Class 1,5 $3, and by Class 1,0 $3 which have a Qmax/Qmin ratio equal or greater than 150.(b)Where a Member State imposes measurement of commercial and/or light industrial use, it shall allow such measurement to be performed by any Class 1,5 USD 3.",read:"10.(a)Where a Member State imposes measurement of residential use, it shall allow such measurement to be performed by means of any Class 1,5 meter, and by Class 1,0 meters which have a Qmax/Qmin ratio equal or greater than 150.(b)Where a Member State imposes measurement of commercial and/or light industrial use, it shall allow such measurement to be performed by any Class 1,5 meter.";on page 215, Annex VI, point 7.5, table, second column, sixth row:for:"Type identification (e.g. Pt 100)",read:"Type identification (e.g. Pt100)".