Commission Regulation (EU) No 817/2013 of 28 August 2013 amending Annexes II and III to Regulation (EC) No 1333/2008 of the European Parliament and of the Council and the Annex to Commission Regulation (EU) No 231/2012 as regards Octenyl succinic acid modified gum arabic Text with EEA relevance
(1) In Part B, in Table 3 "Additives other than colours and sweeteners" the following entry is inserted after the entry for food additive E 422: "E 423 Octenyl succinic acid modified gum arabic" (2) Part E is amended as follows: (a) in category 05.4 "Decorations, coatings and fillings, except fruit based fillings covered by category 4.2.4", the following entry is inserted after the entry for food additive E 416: "E 423 Octenyl succinic acid modified gum arabic 10000 Only icings" (b) in category 12.6 "Sauces", the following entry is inserted after the entry for food additive E 416: "E 423 Octenyl succinic acid modified gum arabic 10000 "(c) in category 14.1.4 "Flavoured drinks" the following entry is inserted after the entry for food additive E 405: "E 423 Octenyl succinic acid modified gum arabic 1000 only in energy drinks and in drinks containing fruit juice"
"E 423 | Octenyl succinic acid modified gum arabic | Flavouring-oil emulsions used in categories 03: edible ices; 07.2: Fine bakery wares; 08.2: Processed meat, only processed poultry; 09.2: Processed fish and fishery products including mollusks and crustaceans and in category 16: Desserts excluding products covered in category 1, 3 and 4. | 500 mg/kg in the flavouring emulsion |
Flavouring-oil emulsions used in category 14.1.4: Flavoured drinks, only flavoured drinks not containing fruit juices and in carbonated flavoured drinks containing fruit juices and in category 14.2: Alcoholic beverages, including alcohol-free and low-alcohol counterparts | 220 mg/kg in the flavouring emulsion | ||
Flavouring-oil emulsions used in categories 05.1: Cocoa and Chocolate products as covered by Directive 2000/36/EC, 05.2: Other confectionery including breath refreshening microsweets, 05.4: Decorations, coatings and fillings, except fruit based fillings covered by category 4.2.4 and in category 06.3: Breakfast cereals. | 300 mg/kg in the flavouring emulsion | ||
Flavouring-oil emulsions used in category 01.7.5: Processed cheese. | 120 mg/kg in the flavouring emulsion | ||
Flavouring-oil emulsions used in category 05.3: Chewing gum. | 60 mg/kg in the flavouring emulsion | ||
Flavouring-oil emulsions used in category 01.8: Dairy analogues, including beverage whiteners; 04.2.5: Jam, jellies and marmalades and similar products; 04.2.5.4: Nut butters and nut spreads; 08.2: Processed meat; 12.5: Soups and broths, 14.1.5.2: Other, only instant coffee and tea and in cereal based ready-to-eat-dishes. | 240 mg/kg in the flavouring emulsion | ||
Flavouring-oil emulsions used in category 10.2: Processed eggs and egg products. | 140 mg/kg in the flavouring emulsion | ||
Flavouring-oil emulsions used in category 14.1.4: Flavoured drinks, only non carbonated flavoured drinks containing fruit juices; 14.1.2: Fruit juices as defined by Directive 2001/112/EC and vegetable juices, only vegetable juices and in category 12.6: Sauces, only gravies and sweet sauces. | 400 mg/kg in the flavouring emulsion | ||
Flavouring-oil emulsions used in category 15: Ready-to-eat savouries and snacks. | 440 mg/kg in the flavouring emulsion" |
Gum arabic hydrogen octenylbutandioate; Gum arabic hydrogen octenylsuccinate; OSA modified gum arabic; OSA modified gum acacia | |
Octenyl succinic acid modified gum arabic is produced by esterifying gum arabic ( | |
Einecs | |
Chemical name | |
Chemical formula | |
Weight Average Molecular Weight | |
Assay | |
Off-white to light tan, free flowing powder | |
Viscosity of a 5 % solution at 25 °C | Not more than 30 mPa.s. |
Precipitation reaction | Forms flocculent precipitate in lead sub-acetate solution (TS) |
Solubility | Freely soluble in water; insoluble in ethanol |
pH for a 5 % aqueous solution | 3,5 to 6,5 |
Loss on drying | Not more than 15 % (105 °C, 5 h) |
Degree of esterification | Not more than 0,6 % |
Total ash | Not more than 10 % (530 °C) |
Acid-insoluble ash | Not more than 0,5 % |
Water insoluble matter | Not more than 1,0 % |
Test for starch or dextrine | Boil a 1 in 50 aqueous solution of the sample, add about 0,1 ml iodine TS. No bluish or reddish colour should be produced. |
Test for tannin-bearing gums | To 10 ml of a 1 in 50 aqueous solution of the sample add about 0,1 ml ferric chloride TS. No blackish coloration or blackish precipitate should be formed. |
Residual octenyl succinic acid | Not more than 0,3 % |
Lead | Not more than 2 mg/kg |
Absent in 25 g | |
Absent in 1 g" |