Commission Directive 2013/2/EU of 7 February 2013 amending Annex I to Directive 94/62/EC of the European Parliament and of the Council on packaging and packaging waste Text with EEA relevance
Commission Directive 2013/2/EUof 7 February 2013amending Annex I to Directive 94/62/EC of the European Parliament and of the Council on packaging and packaging waste(Text with EEA relevance) THE EUROPEAN COMMISSION,Having regard to the Treaty on the Functioning of the European Union,Having regard to European Parliament and Council Directive 94/62/EC of 20 December 1994 on packaging and packaging wasteOJ L 365, 31.12.1994, p. 10., and in particular Article 3(1) thereof,Whereas:(1)Article 3(1) of Directive 94/62/EC defines "packaging" by setting out a number of criteria. The items listed in Annex I to that Directive are illustrative examples of the application of those criteria.(2)For reasons of legal certainty and harmonisation of the interpretation of the definition of "packaging", it is necessary to review and amend the list of illustrative examples to clarify additional cases where the borderline between what is packaging and what is not, remains unclear. The review follows calls from the Member States and the economic operators to reinforce the implementation of the Directive and create a level playing field in the internal market.(3)Directive 94/62/EC should therefore be amended accordingly.(4)The Committee established by Article 21 of Directive 94/62/EC has not delivered an opinion (on the measures provided for in this Directive) and the Commission therefore submitted to the Council a proposal relating to the measures and forwarded it to the European Parliament. The Council did not act within the two-month period provided for by Article 5a of Council Decision 1999/468/EC of 28 June 1999 laying down the procedures for the exercise of implementing powers conferred on the CommissionOJ L 184, 17.7.1999, p. 23. and the Commission therefore submitted the proposal to the European Parliament without delay. The European Parliament did not oppose the measure within four months from the abovementioned forwarding,HAS ADOPTED THIS DIRECTIVE:
Article 1Annex I to Directive 94/62/EC is replaced by the text set out in the Annex to this Directive.
Article 21.Member States shall bring into force the laws, regulations and administrative provisions necessary to comply with this Directive by 30 September 2013 at the latest. They shall forthwith communicate to the Commission the text of those provisions.When Member States adopt those provisions, they shall contain a reference to this Directive or be accompanied by such a reference on the occasion of their official publication. Member States shall determine how such reference is to be made.2.Member States shall communicate to the Commission the text of the main provisions of national law which they adopt in the field covered by this Directive.
Article 3This Directive shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
Article 4This Directive is addressed to the Member States.
Done at Brussels, 7 February 2013.For the CommissionThe PresidentJosé Manuel BarrosoANNEX"ANNEX IILLUSTRATIVE EXAMPLES FOR THE CRITERIA REFERRED TO IN ARTICLE 3(1)Illustrative examples for criterion (i)PackagingSweet boxesFilm overwrap around a CD caseMailing pouches for catalogues and magazines (with a magazine inside)Cake doilies sold with a cakeRolls, tubes and cylinders around which flexible material (e.g. plastic film, aluminium, paper) is wound, except rolls, tubes and cylinders intended as parts of production machinery and not used to present a product as a sales unitFlower pots intended to be used only for the selling and transporting of plants and not intended to stay with the plant throughout its life timeGlass bottles for injection solutionsCD spindles (sold with CDs, not intended to be used as storage)Clothes hangers (sold with a clothing item)MatchboxesSterile barrier systems (pouches, trays and materials necessary to preserve the sterility of the product)Beverage system capsules (e.g. coffee, cacao, milk) which are left empty after useRefillable steel cylinders used for various kinds of gas, excluding fire extinguishersNon-packagingFlower pots intended to stay with the plant throughout its life timeTool boxesTea bagsWax layers around cheeseSausage skinsClothes hangers (sold separately)Beverage system coffee capsules, coffee foil pouches, and filter paper coffee pods disposed together with the used coffee productCartridges for printersCD, DVD and video cases (sold together with a CD, DVD or video inside)CD spindles (sold empty, intended to be used as storage)Soluble bags for detergentsGrave side lights (containers for candles)Mechanical quern (integrated in a refillable recipient, e.g. refillable pepper mill)Illustrative examples for criterion (ii)Packaging, if designed and intended to be filled at the point of salePaper or plastic carrier bagsDisposable plates and cupsCling filmSandwich bagsAluminium foilPlastic foil for cleaned clothes in laundriesNon-packagingStirrerDisposable cutleryWrapping paper (sold separately)Paper baking cases (sold empty)Cake doilies sold without a cakeIllustrative examples for criterion (iii)PackagingLabels hung directly on or attached to a productPart of packagingMascara brush which forms part of the container closureSticky labels attached to another packaging itemStaplesPlastic sleevesDevice for measuring dosage which forms part of the container closure for detergentsMechanical quern (integrated in a non-refillable recipient, filled with a product, e.g. pepper mill filled with pepper)Non-packagingRadio frequency identification (RFID) tags"