Council Regulation (EU) No 1344/2011 of 19 December 2011 suspending the autonomous Common Customs Tariff duties on certain agricultural, fishery and industrial products and repealing Regulation (EC) No 1255/96
Council Regulation (EU) No 1344/2011of 19 December 2011suspending the autonomous Common Customs Tariff duties on certain agricultural, fishery and industrial products and repealing Regulation (EC) No 1255/96 THE COUNCIL OF THE EUROPEAN UNION,Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,Having regard to the proposal from the European Commission,Whereas:(1)The production in the European Union of certain agricultural, fishery and industrial products specified in this Regulation is currently inadequate or non-existent and thus, the needs of user industries in the Union cannot be met.(2)It is therefore in the interest of the Union to suspend partially or totally the autonomous Common Customs Tariff duties for those products.(3)Council Regulation (EC) No 1255/96 of 27 June 1996 temporarily suspending the autonomous Common Customs Tariff duties on certain industrial, agricultural and fishery productsOJ L 158, 29.6.1996, p. 1. has been amended many times. In the interest of transparency it should therefore be replaced in its entirety.(4)The Regulations suspending the autonomous Common Customs Tariff duties on certain industrial, agricultural and fishery products have largely renewed previous measures. Therefore, in the interests of rationalising the implementation of the measures concerned, it is appropriate not to limit the period of validity of this Regulation as its scope can be adapted and products added to or removed from the Annex to this Regulation by means of a Council regulation.(5)In view of their temporary nature, the suspensions listed in the Annex to this Regulation should be reviewed systematically, at the latest five years after their application or renewal. Moreover, closure of certain suspensions should be warranted at any time, as a result of a proposal of the Commission on the basis of a review carried out on its own initiative or at the request of one or more Member States if the suspensions are no longer in the Union's interest to be maintained or due to technical product developments, to changed circumstances or to economic trends on the market.(6)In accordance with the principle of proportionality, it is necessary and appropriate for the achievement of the basic objectives of this Regulation, namely the improvement of the competitive capacity of the Union industry, thereby enabling the latter to maintain or create employment, modernise their structures, etc., to lay down rules on the suspension of the Common Customs Tariff duties for certain products. In accordance with Article 5(4) of the Treaty on European Union, this Regulation does not go beyond what is necessary to achieve the objectives pursued,HAS ADOPTED THIS REGULATION:
Article 1The autonomous Common Customs Tariff duties for the agricultural, fishery and industrial products listed in the Annex shall be suspended as set out therein.
Article 21.The Commission may at any time review the suspensions for the products listed in the Annex in the following cases:(a)on its own initiative;(b)at the request of one or more Member States.2.The Commission shall carry out a mandatory review of the suspensions in the year set out in the Annex.3.For the purpose of the review the Commission shall be assisted by a group of experts from the Member States.
Article 3Where the Commission considers, on the basis of the review provided for in Article 2, that a suspension for a certain product is to be changed or terminated, it shall submit to the Council a proposal to amend the list set out in the Annex accordingly.
Article 4Regulation (EC) No 1255/96 is hereby repealed.
Article 5This Regulation shall enter into force on the day of its publication in the Official Journal of the European Union.It shall apply from 1 January 2012.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Brussels, 19 December 2011.For the CouncilThe PresidentM. KorolecANNEX
Suspension of duties is subject to Articles 291 to 300 of Commission Regulation (EEC) No 2454/93 (OJ L 253 11.10.1993, p. 1).However, no suspension shall apply where processing is carried out by retail or catering undertakings.The specific additional duty is applicable.A surveillance of imports of goods covered by this tariff suspension shall be established in accordance with the procedure laid down in Article 308d of Commission Regulation (EEC) No 2454/93.
CN codeTARICDescriptionRate of autonomous dutyDate foreseen for mandatory review
ex0302899030Red snapper (Lutjanus purpureus), fresh, chilled, for processing0 %31.12.2013
ex0302900095Hard fish roes, fresh, chilled or frozen0 %31.12.2013
ex0303909091
ex0305200011Hard fish roes, salted or in brine0 %31.12.2013
ex0305200030
ex0710210010Peas in pods, of the species Pisum sativum of the variety Hortense axiphium, frozen, of a thickness of not more than 6 mm, to be used, in their pods, in the manufacture of prepared meals0 %31.12.2013
ex0710809550Bamboo shoots, frozen, not put up for retail sale0 %31.12.2013
ex0711590011Mushrooms, excluding mushrooms of the genera Agaricus, Calocybe, Clitocybe, Lepista, Leucoagaricus, Leucopaxillus, Lyophyllum and Tricholoma, provisionally preserved in brine, in sulphur water, or in other preservative solutions, but unsuitable in that state for immediate consumption, for the food-canning industry0 %31.12.2016
ex0712320010Mushrooms, excluding mushrooms of the genus Agaricus, dried, whole or in identifiable slices or pieces, for treatment other than simple repacking for retail sale0 %31.12.2013
ex0712330010
ex0712390031
ex0804100030Dates, fresh or dried, for use in the manufacture (excluding packing) of products of drink or food industries0 %31.12.2013
ex0810405010Cranberries of the species Vaccinium macrocarpon, fresh, for use in the manufacture (excluding packing) of products of drink or food industries0 %31.12.2013
08119050Fruit of the genus Vaccinium, uncooked or cooked by steaming or boiling in water, frozen, not containing added sugar or other sweetening matter0 %31.12.2013
08119070
ex0811909570
ex0811909520Boysenberries, frozen, not containing added sugar, not put up for retail sale0 %31.12.2013
ex0811909530Pineapple (Ananas comosus), in pieces, frozen0 %31.12.2013
ex0811909540Rose-hips, uncooked or cooked by steaming or boiling in water, frozen, not containing added sugar or other sweetening matter0 %31.12.2013
ex1511901910Palm oil, coconut (copra) oil, palm kernel oil, for the manufacture of:industrial monocarboxylic fatty acids of subheading 38231910,methyl esters of fatty acids of heading 2915 or 2916,fatty alcohols of subheadings 290517, 290519 and 382370 used for the manufacture of cosmetics, washing products or pharmaceutical products,fatty alcohols of subheading 290516, pure or mixed, used for the manufacture of cosmetics, washing products or pharmaceutical products,stearic acid of subheading 38231100, orgoods of heading 34010 %31.12.2013
ex1511909110
ex1513111010
ex1513193010
ex1513211010
ex1513293010
ex1515909992Vegetable oil, refined, containing by weight 35 % or more but not more than 50 % of arachidonic acid or 35 % or more but not more than 50 % of docosahexaenoic acid0 %31.12.2013
ex1516209620Jojoba oil, hydrogenated and interesterified, without any further chemical modification and not subjected to any texturisation process0 %31.12.2014
ex1517909910Vegetable oil, refined, containing by weight 25 % or more but not more than 50 % arachidonic acid or 12 % or more but not more than 50 % docosahexaenoic acid and standardised with high oleic sunflower oil (HOSO)0 %31.12.2016
ex1604110020Pacific salmon (Oncorhynchus spp.), for the processing industry for manufacture into pastes or spreads0 %31.12.2013
ex1604320010Hard fish roes, washed, cleaned of adherent organs and simply salted or in brine, for processing0 %31.12.2013
ex1605100011Crabs of the species "King" (Paralithodes camchaticus), "Hanasaki" (Paralithodes brevipes), "Kegani" (Erimacrus isenbecki), "Queen" and "Snow" (Chionoecetes spp.), "Red" (Geryon quinquedens), "Rough stone" (Neolithodes asperrimus), Lithodes santolla, "Mud" (Scylla serrata), "Blue" (Portunus spp.), simply boiled in water and shelled, whether or not frozen, in immediate packings of a net content of 2 kg or more0 %31.12.2013
ex1605100019
ex1902301010Transparent noodles, cut in pieces, obtained from beans (Vigna radiata (L.) Wilczek), not put up for retail sale0 %31.12.2013
ex1903000020
ex2005910010Bamboo shoots, prepared or preserved, in immediate packings of a net content of more than 5 kg0 %31.12.2013
ex2007995040Mango puree concentrate:of the genus Mangifera,of a Brix value of 27 or more but not more than 31,used in the manufacture of products of drink industry6 %31.12.2015
ex2008994893
ex2007995050Acerola puree concentrate:of the genus Malpighia,of a Brix value of 19 or more but not more than 31,for use in the manufacture of products of drink industry9 %31.12.2015
ex2008994950
ex2007995060Guava puree concentrate:of the genus Psidium,of a Brix value of 19 or more but not more than 31,for use in the manufacture of products of drink industry6 %31.12.2015
ex2008994820
ex2008601930Sweet cherries containing added spirit, whether or not with a sugar content of 9 % by weight, of a diameter of not more than 19,9 mm, with stone, for use in chocolate products10 %31.12.2012
ex2008603930
ex2008939120Sweetened dried cranberries, excluding packing alone as processing, for the manufacture of products of food processing industries0 %31.12.2012
ex2008994894Mango puree:not from concentrate,of the genus Mangifera,of a Brix value of 14 or more, but not more than 20,used in the manufacture of products of drink industry6 %31.12.2015
ex2008994930Seedless boysenberry puree not containing added spirit, whether or not containing added sugar0 %31.12.2014
ex2008999940
ex2009419270Pineapple juice:not from concentrate,of the genus Ananas,of a Brix value of 11 or more but not more than 16,used in the manufacture of products of drink industry8 %31.12.2015
ex2009419970
ex2009493091Pineapple juice, other than in powder form:with a Brix value of more than 20 but not more than 67,a value of more than EUR 30 per 100 kg net weight,containing added sugars,used in the manufacture of products of drink industry0 %31.12.2014
ex2009813110Cranberry juice concentrate:of a Brix value of 40 or more but not more than 66,in immediate packings of a content of 50 litres or more0 %31.12.2014
ex2009897985Acai berry juice concentrate:of the species Euterpe oleracea,frozen,not sweetened,not in powder form,of a Brix value of 23 or more but not more than 32,in immediate packings of a content of 10 kg or more0 %31.12.2016
ex2009897992Frozen boysenberry juice concentrate with a Brix value of 61 or more, but not more than 67, in immediate packing of a content of 50 litres or more0 %31.12.2016
ex2009899993Untreated frozen coconut water, in immediate packing of a content of 50 litres or more0 %31.12.2016
ex2106102010Soya protein isolate, containing by weight 6,6 % or more but not more than 8,6 % of calcium phosphate0 %31.12.2013
ex2106909245Preparation containing by weight:more than 30 % but not more than 35 % liquorice extract,more than 65 % but not more than 70 % tricaprylin,standardised by weight to 3 % or more but not more than 4 % glabridin0 %31.12.2016
ex2519901010Fused magnesia with a purity by weight of 97 % or more0 %31.12.2016
ex2710122510Mixture of isomers 2,4,4-trimethylpent-1-ene and 2,4,4-trimethylpent-2-ene0 %31.12.2013
ex2804509010Tellurium of a purity by weight of 99,99 % or more, but not more than 99,999 % by weight, (CAS RN 13494-80-9)0 %31.12.2013
ex2805301010Alloy of cerium and other rare-earth metals, containing by weight 47 % or more of cerium0 %31.12.2013
ex2805309030Rare earth metals, scandium and yttrium of a purity by weight of 98,5 % or more0 %31.12.2015
ex2811198010Sulphamidic acid (CAS RN 5329-14-6)0 %31.12.2013
ex2811220010Silicon dioxide in the form of powder, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges0 %31.12.2013
ex2811220030Balls of porous white silica of a particle size of more than 1 μm for use in the manufacture of cosmetic products0 %31.12.2016
ex2812900010Nitrogen trifluoride (CAS RN 7783-54-2)0 %31.12.2013
ex2812900020Silicon tetrafluoride (CAS RN 7783-61-1)0 %31.12.2013
ex2818109110Sintered corundum with micro crystalline structure, containing by weight:94 % or more, but not more than 98,5 % of α-Al2O3,2 % (± 1,5 %) of magnesium spinel,1 % (± 0,6 %) of yttrium oxide, and2 % (± 1,2 %) of each lanthanum oxide and neodymium oxide,with less than 50 % of the total weight having a particle size of more than 10 mm0 %31.12.2015
ex2818200010Activated alumina with a specific surface area of at least 350 m2/g0 %31.12.2014
ex2818300010Aluminium hydroxide oxide in the form of pseudo-boehmite4 %31.12.2013
28191000Chromium trioxide0 %31.12.2016
ex2823000010Titanium dioxide with a purity by weight of 99 % or more, (CAS RN 13463-67-7)0 %31.12.2013
ex2825500020Copper (I or II) oxide containing by weight 78 % or more of copper and not more than 0,03 % of chloride0 %31.12.2013
ex2826199010Tungsten hexafluoride with a purity of 99,9 % by weight or more, (CAS RN 7783-82-6)0 %31.12.2015
ex2827398510Copper monochloride of a purity by weight of 96 % or more but not more than 99 %0 %31.12.2013
ex2827398520Antimony pentachloride of a purity by weight of 99 % or more, (CAS RN 7647-18-9)0 %31.12.2016
ex2827398530Manganese dichloride (CAS RN 7773-01-5)0 %31.12.2013
ex2827499010Hydrated zirconium dichloride oxide0 %31.12.2013
ex2830100010Disodium tetrasulphide, containing by weight 38 % or less of sodium calculated on the dry weight0 %31.12.2013
ex2833298020Manganese sulphate monohydrate0 %31.12.2013
ex2833298030Zirconium sulphate (CAS RN 14644-61-2)0 %31.12.2015
ex2835100010Sodium hypophosphite monohydrate (CAS RN 10039-56-2)0 %31.12.2012
ex2836910020Lithium carbonate, containing one or more of the following impurities at the concentrations indicated:2 mg/kg or more of arsenic,200 mg/kg or more of calcium,200 mg/kg or more of chlorides,20 mg/kg or more of iron,150 mg/kg or more of magnesium,20 mg/kg or more of heavy metals,300 mg/kg or more of potassium,300 mg/kg or more of sodium,200 mg/kg or more of sulphates, determined according to the methods specified in the European Pharmacopœia0 %31.12.2013
ex2836991720Zirconium (IV) basic carbonate0 %31.12.2013
ex2837190020Copper cyanide (CAS RN 544-92-3)0 %31.12.2013
ex2837200010Tetrasodium hexacyanoferrate (II), (CAS RN 13601-19-9)0 %31.12.2016
ex2839190010Disodium disilicate (CAS RN 13870-28-5)0 %31.12.2012
ex2839900010Lead silicate hydrate, of a lead content by weight of 84,5 % (± 1,5 %), evaluated as lead monoxide, in the form of powder0 %31.12.2013
ex2839900020Calcium silicate (CAS RN 1344-95-2)0 %31.12.2013
28413000Sodium dichromate (CAS RN 10588-01-9)0 %31.12.2013
ex2841800010Diammonium wolframate (ammonium paratungstate), (CAS RN 11120-25-5)0 %31.12.2012
ex2841908510Lithium cobalt (III) oxide with a cobalt content of at least 59 %, (CAS RN 12190-79-3)0 %31.12.2012
ex2842100010Synthetic Beta Zeolite powder0 %31.12.2013
ex2842100020Synthetic Chabasite Zeolite Powder0 %31.12.2014
ex2842901010Sodium selenate (CAS RN 13410-01-0)0 %31.12.2014
ex2843290010Silver oxide, nitrate- and carbonate-free, with a silver content of at least 99,99 % by weight of the metal content, for the manufacture of silver oxide batteries0 %31.12.2016
28451000Heavy water (deuterium oxide) (Euratom)0 %31.12.2013
28459010Deuterium and compounds thereof; hydrogen and compounds thereof, enriched in deuterium; mixtures and solutions containing these products (Euratom)0 %31.12.2013
ex2845909010Helium-30 %31.12.2016
ex2845909020Water enriched at a level of 95 % or more by weight with oxygen-180 %31.12.2013
ex2845909030(13C)Carbon monoxide0 %31.12.2016
ex2845909040Iron boride enriched at a level of more than 95 % by weight with boron-100 %31.12.2013
ex2846100010Rare-earth concentrate containing by weight 60 % or more but not more than 95 % of rare-earth oxides and not more than 1 % each of zirconium oxide, aluminium oxide or iron oxide, and having a loss on ignition of 5 % or more by weight0 %31.12.2013
ex3824909748
ex2846100020Dicerium tricarbonate, whether or not hydrated (CAS RN 537-01-9)0 %31.12.2013
ex2846100030Cerium lanthanum carbonate, whether or not hydrated0 %31.12.2013
ex2846100040Cerium lanthanum neodymium praseodymium carbonate, whether or not hydrated0 %31.12.2013
28469000Compounds, inorganic or organic, of rare-earth metals, of yttrium or of scandium or of mixtures of these metals, other than those of subheading 284610000 %31.12.2013
ex2848000010Phosphine (CAS RN 7803-51-2)0 %31.12.2013
ex2850002010Silane (CAS RN 7803-62-5)0 %31.12.2013
ex2850002020Arsine (CAS RN 7784-42-1)0 %31.12.2013
ex2850002030Titanium nitride with a particle size of not more than 250 nm, (CAS RN 25583-20-4)0 %31.12.2012
ex2850006010Sodium azide (CAS RN 26628-22-8)0 %31.12.2013
ex2853009010Chlorosulphonyl isocyanate (CAS RN 1189-71-5)0 %31.12.2016
ex2903399010Carbon tetrafluoride (tetrafluoromethane), (CAS RN 75-73-0)0 %31.12.2013
ex2903399030Perfluoroethane (CAS RN 76-16-4)0 %31.12.2013
ex29033990401,1-Difluoroethane (CAS RN 75-37-6)0 %31.12.2013
ex29033990501,1,1,3,3-Pentafluoropropane (CAS RN 460-73-1)0 %31.12.2013
ex29033990701,1,1,2-Tetrafluoroethane, certified odourless containing a maximum:600 ppm by weight of 1,1,2,2-tetrafluoroethane,2 ppm by weight of pentafluoroethane,2 ppm by weight of chlorodifluoromethane,2 ppm by weight of chloropentafluoroethane,2 ppm by weight of dichlorodifluoromethane,for use in the manufacture of pharmaceutical grade propellant for medical metered dose inhalers, (CAS RN 811-97-2)0 %31.12.2016
ex2903399075Trans-1,3,3,3-tetrafluoroprop-1-ene (CAS RN 1645-83-6)0 %31.12.2013
ex2903399080Hexafluoropropene (CAS RN 116-15-4)0 %31.12.2016
ex29037730101,1,1-Trichlorotrifluoroethane (CAS RN 354-58-5)0 %31.12.2013
ex2903779010Chlorotrifluoroethylene (CAS RN 79-38-9)0 %31.12.2016
ex29038990101,6,7,8,9,14,15,16,17,17,18,18-Dodecachloropentacyclo [12.2.1.16,9.02,13.05,10]octadeca-7,15-diene, (CAS RN 13560-89-9)0 %31.12.2013
ex2903899030Octafluorocyclopentene (CAS RN 559-40-0)0 %31.12.2016
ex2903999010Di- or tetrachlorotricyclo[8.2.2.24,7]hexadeca-1(12),4,6,10,13,15-hexaene, mixed isomers0 %31.12.2013
ex29039990201,2-Bis(pentabromophenyl)ethane (CAS RN 84852-53-9)0 %31.12.2013
ex29039990402,6-Dichlorotoluene, of a purity by weight of 99 % or more and containing:0,001 mg/kg or less of tetrachlorodibenzodioxines,0,001 mg/kg or less of tetrachlorodibenzofurans,0,2 mg/kg or less of tetrachlorobiphenyls0 %31.12.2013
ex2903999050Fluorobenzene (CAS RN 462-06-6)0 %31.12.2013
ex2903999060α-Chloro(ethyl)toluenes0 %31.12.2013
ex2903999070α,α,α′,α′-Tetrachloro-o-xylen (CAS RN 25641-99-0)0 %31.12.2015
ex2904100030Sodium p-styrenesulphonate (CAS RN 2695-37-6)0 %31.12.2014
ex2904100040Sodium toluene-4-sulphonate (CAS RN 657-84-1)0 %31.12.2012
ex2904100050Sodium 2-methylprop-2-ene-1-sulphonate (CAS RN 1561-92-8)0 %31.12.2014
ex2904200010Nitromethane (CAS RN 75-52-5)0 %31.12.2015
ex2904200020Nitroethane (CAS RN 79-24-3)0 %31.12.2015
ex29042000301-Nitropropane (CAS RN 108-03-2)0 %31.12.2015
ex29042000402-Nitropropane (CAS RN 79-46-9)0 %31.12.2013
ex2904904010Trichloronitromethane, for the manufacture of goods of subheading 380892, (CAS RN 76-06-2)0 %31.12.2013
ex29049095201-Chloro-2,4-dinitrobenzene (CAS RN 97-00-7)0 %31.12.2013
ex2904909530Tosyl chloride (CAS RN 98-59-9)0 %31.12.2014
ex2905190011Potassium tert-butanolate (potassium tert-butoxide), whether or not in the form of a solution in tetrahydrofuran0 %31.12.2013
ex3824909756
ex29051900302,6-Dimethylheptan-4-ol (CAS RN 108-82-7)0 %31.12.2013
ex29051900402,6-Dimethylheptan-2-ol (CAS RN 13254-34-7)0 %31.12.2014
ex2905220020Linalool (CAS RN 78-70-6)0 %31.12.2016
ex29052990103,5-Dimethylhex-1-yn-3-ol (CAS RN 107-54-0)0 %31.12.2014
ex2905299020Dec-9-en-1-ol (CAS RN 13019-22-2)0 %31.12.2014
ex2905299030Dodeca-8,10-dien-1-ol (CAS RN 33956-49-9)0 %31.12.2015
ex2905399510Propane-1,3-diol (CAS RN 504-63-2)0 %31.12.2015
ex2905399520Butane-1,2-diol (CAS RN 584-03-2)0 %31.12.2016
ex29053995302,4,7,9-Tetramethyl-4,7-decanediol (CAS RN 17913-76-7)0 %31.12.2016
ex2905490010Ethylidynetrimethanol (CAS RN 77-85-0)0 %31.12.2014
ex29055998202,2,2-Trifluoroethanol (CAS RN 75-89-8)0 %31.12.2014
29061100Menthol0 %31.12.2013
ex2906190010Cyclohex-1,4-ylenedimethanol (CAS RN 105-08-8)0 %31.12.2013
ex29061900204,4′-Isopropylidenedicyclohexanol0 %31.12.2013
ex29062900102,2′-(m-Phenylene)dipropan-2-ol (CAS RN 1999-85-5)0 %31.12.2014
ex29062900201-Hydroxymethyl-4-methyl-2,3,5,6-tetrafluorobenzene (CAS RN 79538-03-7)0 %31.12.2013
ex29071590102-Naphthol (CAS RN 135-19-3)0 %31.12.2016
ex29071990102,3,5-Trimethylphenol (CAS RN 697-82-5)0 %31.12.2013
ex2907199020Biphenyl-4-ol (CAS RN 92-69-3)0 %31.12.2013
ex2907210010Resorcinol (CAS RN 108-46-3)0 %31.12.2013
ex29072900204,4′-(3,3,5-Trimethylcyclohexylidene)diphenol0 %31.12.2013
ex29072900304,4′,4″-Ethylidynetriphenol0 %31.12.2013
ex29072900354-[2-(4-Hydroxy-3-prop-2-enylphenyl)propan-2-yl]-2-prop-2-enylphenol, (CAS RN 1745-89-7)0 %31.12.2016
ex29072900506,6′,6″-Tricyclohexyl-4,4′,4″-butane-1,1,3-triyltri(m-cresol)0 %31.12.2013
ex29072900702,2′,2″,6,6′,6″-Hexa-tert-butyl-α,α′,α″-(mesitylene-2,4,6-triyl)tri-p-cresol, (CAS RN 1709-70-2)0 %31.12.2013
ex2907290085Phloroglucinol whether or not hydrated0 %31.12.2013
ex29089900304-Nitrophenol (CAS RN 100-02-7)0 %31.12.2013
ex2909199020Bis(2-chloroethyl) ether0 %31.12.2013
ex2909199030Mixture of isomers of nonafluorobutyl methyl ether or nonafluorobutyl ethyl ether, of a purity by weight of 99 % or more0 %31.12.2013
ex29091990503-Ethoxy-perfluoro-2-methylhexane (CAS RN 297730-93-9)0 %31.12.2016
ex29091990601-Methoxyheptafluoropropane (CAS RN 375-03-1)0 %31.12.2013
ex2909303810Bis(pentabromophenyl) ether0 %31.12.2013
ex29093090102-(Phenylmethoxy)naphthalene (CAS RN 613-62-7)0 %31.12.2014
ex29093090201,2-Bis(3-methyl-phenoxy)ethane (CAS RN 54914-85-1)0 %31.12.2014
ex29093090303,4,5-Trimethoxytoluene (CAS RN 6443-69-2)0 %31.12.2015
ex29095000104-(2-Methoxyethyl)phenol (CAS RN 56718-71-9)0 %31.12.2013
ex2909500020Ubiquinol (CAS RN 992-78-9)0 %31.12.2015
ex2909600010Bis(α,α-dimethylbenzyl) peroxide (CAS RN 80-43-3)0 %31.12.2013
ex29096000201,4-Di(2-tert-butylperoxyisopropyl)benzene (CAS RN 25155-25-3)0 %31.12.2016
ex29109000302,3-Epoxypropan-1-ol (glycidol)0 %31.12.2013
ex29109000601,2-Epoxyoctadecane, of a purity by weight of 82 % or more0 %31.12.2013
ex2912290030α,α,3-Trimethylbenzenepropanal (CAS RN 107737-97-3)0 %31.12.2013
ex2912290040(2E,4E,6E,8E,10E,12E)-2,7,11-Trimethyl-13-(2,6,6-trimethyl-1-cyclohexen-1-yl)-2,4,6,8,10,12-tridecahexaenal, (CAS RN 1638-05-7)0 %31.12.2016
ex29124900103-Phenoxybenzaldehyde (CAS RN 39515-51-0)0 %31.12.2013
ex2912490030Salicylaldehyde (CAS RN 90-02-8)0 %31.12.2015
ex2914199020Heptan-2-one (CAS RN 110-43-0)0 %31.12.2012
ex29141990303-Methylbutanone (CAS RN 563-80-4)0 %31.12.2012
ex2914199040Pentan-2-one (CAS RN 108-10-1)0 %31.12.2012
ex2914290020Cyclohexadec-8-enone (CAS RN 3100-36–5)0 %31.12.2013
ex2914290030(R)-p-Mentha-1(6),8-dien-2-one (CAS RN 6485-40-1)0 %31.12.2015
ex2914290040Camphor0 %31.12.2013
ex2914390020Stearoyl benzoyl methane (CAS RN 58446-52-9)0 %31.12.2012
ex2914390030Benzophenone (CAS RN 119-61-9)0 %31.12.2012
ex29143900401,3-Diphenylpropane-1,3-dione (CAS RN 120-46-7)0 %31.12.2012
ex29143900504-Phenylbenzophenone (CAS RN 2128-93-0)0 %31.12.2013
ex29143900604-Methylbenzophenone (CAS RN 134-84-9)0 %31.12.2013
ex29145000203′-Hydroxyacetophenone (CAS RN 121-71-1)0 %31.12.2015
ex29145000302′-Hydroxyacetophenone0 %31.12.2013
ex29145000602,2-Dimethoxy-2-phenylacetophenone (CAS RN 24650-42-8)0 %31.12.2012
ex291450007016α,17α-Epoxy-3β-hydroxypregn-5-en-20-one, (CAS RN 974-23-2)0 %31.12.2012
ex29145000802′,6′-Dihydroxyacetophenone (CAS RN 699-83-2)0 %31.12.2013
ex29146990102-Ethylanthraquinone (CAS RN 84-51-5)0 %31.12.2013
ex29146990202-Pentylanthraquinone (CAS RN 13936-21-5)0 %31.12.2013
ex29146990301,4-Dihydroxyanthraquinone (CAS RN 81-64-1)0 %31.12.2013
ex29147000101-Chloro-3,3-dimethylbutan-2-one (CAS RN 13547-70-1)0 %31.12.2013
ex2914700040Perfluoro(2-methylpentan-3-one), (CAS RN 756-13-8)0 %31.12.2013
ex29147000503′-Chloropropiophenone (CAS RN 6285-05-8)0 %31.12.2013
ex29147000604′-tert-Butyl-2′,6′-dimethyl-3′,5′-dinitroacetophenone (CAS RN 81-14-1)0 %31.12.2015
ex29147000704-Chloro-4′-hydroxybenzophenone (CAS RN 42019-78-3)0 %31.12.2016
ex2915290010Antimony triacetate (CAS RN 6923-52-0)0 %31.12.2013
ex2915390040tert-Butyl acetate (CAS RN 540-88-5)0 %31.12.2013
ex29153900503-Acetylphenyl acetate (CAS RN 2454-35-5)0 %31.12.2013
ex2915390060Dodec-8-enyl acetate (CAS RN 28079-04-1)0 %31.12.2015
ex2915390065Dodeca-7,9-dienyl acetate (CAS RN 54364-62-4)0 %31.12.2015
ex2915390070Dodec-9-enyl acetate (CAS RN 16974-11-1)0 %31.12.2015
ex2915390075Isobornyl acetate (CAS RN 125-12-2)0 %31.12.2016
ex29153900801-Phenylethyl acetate (CAS RN 93-92-5)0 %31.12.2016
ex2915907040Nonanoic acid (pelargonic acid), (CAS RN 112-05-0)0 %31.12.2013
ex2915907050Allyl heptanoate (CAS RN 142-19-8)0 %31.12.2014
ex2915907060Ethyl-6,8-dichlorooctanoate (CAS RN 1070-64-0)0 %31.12.2015
ex2915907070Cobalt borate neodecanoate complexes, with a purity by weight of 92 % or more, (CAS RN 68457-13-6)0 %31.12.2016
ex2915907080Ethyl difluoroacetate (CAS RN 454-31-9)0 %31.12.2016
ex29161200102-tert-Butyl-6-(3-tert-butyl-2-hydroxy-5-methylbenzyl)-4-methylphenyl acrylate0 %31.12.2013
ex29161200202-Ethoxyethyl acrylate (CAS RN 106-74-1)0 %31.12.2013
ex2916120030Isobutyl acrylate (CAS RN 106-63-8)0 %31.12.2013
ex29161200402,4-Di-tert-pentyl-6-[1-(3,5-di-tert-pentyl-2-hydroxyphenyl)ethyl]phenylacrylate, (CAS RN 123968-25-2)0 %31.12.2013
ex2916130010Hydroxyzinc methacrylate powder (CAS RN 63451-47-8)0 %31.12.2014
ex2916130020Zinc dimethacrylate, in the form of powder0 %31.12.2013
ex29161400102,3-Epoxypropyl methacrylate (CAS RN 106-91-2)0 %31.12.2013
ex2916199520Methyl 3,3-dimethylpent-4-enoate (CAS RN 63721-05-1)0 %31.12.2013
ex2916199530Potassium (E,E)-hexa-2,4-dienoate (CAS RN 24634-61-5)0 %31.12.2016
ex2916200050Ethyl 2,2-dimethyl-3-(2-methylpropenyl)cyclopropanecarboxylate, (CAS RN 97-41-6)0 %31.12.2013
ex29162000603-Cyclohexylpropionic acid (CAS RN 701-97-3)0 %31.12.2015
ex29163990102,3,4,5-Tetrafluorobenzoic acid (CAS RN 1201-31-6)0 %31.12.2016
ex29163990152-Chloro-5-nitrobenzoic acid (CAS RN 2516-96-3)0 %31.12.2016
ex29163990203,5-Dichlorobenzoyl chloride (CAS RN 2905-62-6)3,6 %31.12.2013
ex29163990252-Methyl-3-(4-Fluorophenyl)-propionyl chloride0 %31.12.2015
ex29163990302,4,6-Trimethylbenzoyl chloride (CAS RN 938-18-1)0 %31.12.2015
ex2916399040Vinyl 4-tert-butylbenzoate (CAS RN 15484-80-7)0 %31.12.2013
ex29163990452-Chlorobenzoic acid (CAS RN 118-91-2)0 %31.12.2016
ex29163990503,5-Dimethylbenzoyl chloride (CAS RN 6613-44-1)0 %31.12.2013
ex29163990554-tert-Butylbenzoic acid (CAS RN 98-73-7)0 %31.12.2012
ex29163990604-Ethylbenzoyl chloride (CAS RN 16331-45-6)0 %31.12.2013
ex29163990652-(4-Nitrophenyl)butyric acid (CAS RN 7463-53-8)0 %31.12.2013
ex2916399070Ibuprofen (INN) (CAS RN 15687-27-1)0 %31.12.2013
ex2916399080Ethyl 2-(4-nitrophenyl)butyrate0 %31.12.2013
ex2917110020Bis(p-methylbenzyl) oxalate (CAS RN 18241-31-1)0 %31.12.2013
ex2917110030Cobalt oxalate (CAS RN 814-89-1)0 %31.12.2014
ex2917120020Dimethyl adipate (CAS RN 627-93-0)0 %31.12.2015
ex2917191010Dimethyl malonate (CAS RN 108-59-8)0 %31.12.2014
ex2917199020Sodium 1,2-bis(cyclohexyloxycarbonyl)ethanesulphonate0 %31.12.2013
ex2917199030Ethylene brassylate (CAS RN 105-95-3)0 %31.12.2014
ex2917199050Tetradecanedioic acid (CAS RN 821-38-5)0 %31.12.2015
ex2917199070Itaconic acid (CAS RN 97-65-4)0 %31.12.2013
ex29172000301,4,5,6,7,7-Hexachloro-8,9,10-trinorborn-5-ene-2,3-dicarboxylic anhydride0 %31.12.2013
ex29172000403-Methyl-1,2,3,6-tetrahydrophthalic anhydride (CAS RN 5333-84-6)0 %31.12.2013
ex2917340010Diallyl phthalate (CAS RN 131-17-9)0 %31.12.2013
ex2917399510Bis(2-ethylhexyl)-1,4-benzenedicarboxylate (CAS RN 6422-86-2)0 %31.12.2014
ex2917399520Dibutyl-1,4-benzenedicarboxylate (CAS RN 1962-75-0)0 %31.12.2015
ex2917399530Benzene-1,2:4,5-tetracarboxylic dianhydride (CAS RN 89-32-7)0 %31.12.2015
ex2917399540Benzene-1,2,4-tricarboxylic acid 1,2-anhydride (CAS RN 552-30-7)0 %31.12.2015
ex2918199820L-Malic acid (CAS RN 97-67-6)0 %31.12.2013
ex2918230010Benzyl salicylate (CAS RN 118-58-1)0 %31.12.2016
ex2918290010Monohydroxynaphthoic acids0 %31.12.2013
ex2918290030Octadecyl-3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate, (CAS RN 2082-79-3)0 %31.12.2016
ex2918290050Hexamethylene bis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate], (CAS RN 35074-77-2)0 %31.12.2013
ex2918290060Methyl-, ethyl-, propyl- or butyl esters of 4-hydroxybenzoic acid or their sodium salts, (CAS RN 35285-68-8, 99-76-3, 5026-62-0, 94-26-8, 94-13-3, 35285-69-9, 120-47-8, 36457-20-2 or 4247-02-3)0 %31.12.2016
ex2918300030Methyl-2-benzoylbenzoate (CAS RN 606-28-0)0 %31.12.2013
ex2918300040Phthalaldehydic acid (CAS RN 119-67-5)0 %31.12.2013
ex2918300050Methyl (3-oxo-2-pentylcyclopentyl)acetate (CAS RN 24851-98-7)0 %31.12.2015
ex29189990103,4-Epoxycyclohexylmethyl 3,4-epoxycyclohexanecarboxylate, (CAS RN 2386-87-0)0 %31.12.2013
ex2918999020Methyl 3-methoxyacrylate (CAS RN 5788-17-0)0 %31.12.2014
ex2918999030Methyl 2-(4-hydroxyphenoxy)propionate (CAS RN 96562-58-2)0 %31.12.2013
ex2918999040trans-4-Hydroxy-3-methoxycinnamic acid (CAS RN 1135-24-6)0 %31.12.2013
ex2918999050Methyl 3,4,5-trimethoxybenzoate (CAS RN 1916-07-0)0 %31.12.2013
ex29189990603,4,5-Trimethoxybenzoic acid (CAS RN 118-41-2)0 %31.12.2013
ex2918999070Allyl-(3-methylbutoxy)acetate (CAS RN 67634-00-8)0 %31.12.2014
ex29199000102,2′-Methylenebis(4,6-di-tert-butylphenyl) phosphate, monosodium salt0 %31.12.2013
ex2919900030Aluminium hydroxybis[2,2′-methylenebis(4,6-di-tert-butylphenyl)phosphate], (CAS RN 151841-65-5)0 %31.12.2013
ex2919900040Tri-n-hexylphosphate (CAS RN 2528-39-4)0 %31.12.2013
ex2920190010Fenitrothion (ISO) (CAS RN 122-14-5)0 %31.12.2013
ex2920190020Tolclofos-methyl (ISO) (CAS RN 57018-04-9)0 %31.12.2013
ex2920901010Diethyl sulphate0 %31.12.2013
ex2920901020Diallyl 2,2′-oxydiethyl dicarbonate (CAS RN 142-22-3)0 %31.12.2013
ex2920901040Dimethyl carbonate (CAS RN 616-38-6)0 %31.12.2013
ex2920901050Di-tert-butyl dicarbonate (CAS RN 24424-99-5)0 %31.12.2013
29209030Trimethyl phosphite (CAS RN 121-45-9)0 %31.12.2013
29209040Triethyl phosphite (CAS RN 122-52-1)0 %31.12.2016
ex2920908510O,O′-Dioctadecyl pentaerythritol bis(phosphite)0 %31.12.2013
ex2920908520Tris(methylphenyl)phosphite (CAS RN 25586-42-9)0 %31.12.2015
ex29209085302,2′-[[3,3′,5,5′-Tetrakis(1,1-dimethylethyl)[1,1′-biphenyl]-2,2′-diyl]bis(oxy)]bis[biphenyl-1,3,2-dioxaphosphepine], (CAS RN 138776-88-2)0 %31.12.2015
ex2920908540Bis(2,4-dicumylphenyl)pentaerythritol diphosphite (CAS RN 154862-43-8)0 %31.12.2015
ex2921195010Diethylamino-triethoxysilane0 %31.12.2014
ex2929900020
ex2921199920Ethyl(2-methylallyl)amine0 %31.12.2013
ex2921199930Allylamine (CAS RN 107-11-9)0 %31.12.2013
ex2921199940Tris(diethylamido)tert-butylimido tantalum (V), (CAS RN 169896-41-7)0 %31.12.2013
ex2921199950Tetrakis (Ethylmethylamino) hafnium (IV), (CAS RN 352535-01-4)0 %31.12.2013
ex2921199960Tetrakis(ethylmethylamino) zirconium (IV), (CAS RN 175923-04-3)0 %31.12.2013
ex2921290010N,N,N′,N′-Tetrabutylhexamethylenediamine0 %31.12.2013
ex2921290020Tris[3-(dimethylamino)propyl]amine0 %31.12.2013
ex2921290030Bis[3-(dimethylamino)propyl]methylamine0 %31.12.2013
ex2921290040Decamethylenediamine (CAS RN 646-25-3)0 %31.12.2015
ex2921290050N′-[3-(Dimethylamino)propyl]-N,N-dimethylpropane-1,3-diamine, (CAS RN 6711-48-4)0 %31.12.2016
ex2921309910Dicyclohexyl(methyl)amine0 %31.12.2013
ex2921309920Cyclohex-1,3-ylenebis(methylamine), for the manufacture of dishwashing products, (CAS RN 2579-20-6)0 %31.12.2013
ex29213099301,3-Cyclohexanedimethanamine (CAS RN 1477-55-0)0 %31.12.2015
ex29214200102,6-Dichloro-4-nitroaniline (CAS RN 99-30-9)0 %31.12.2013
ex29214200154-Amino-3-nitrobenzenesulphonic acid (CAS RN 616-84-2)0 %31.12.2013
ex2921420025Sodium hydrogen 2-aminobenzene-1,4-disulphonate0 %31.12.2013
ex29214200352-Nitroaniline (CAS RN 88-74-4)0 %31.12.2013
ex29214200452,4,5-Trichloroaniline (CAS RN 636-30-6)0 %31.12.2013
ex29214200503-Aminobenzenesulfonic acid (CAS RN 121-47-1)0 %31.12.2013
ex29214200702-Aminobenzene-1,4-disulfonic acid (CAS RN 98-44-2)0 %31.12.2013
ex29214200804-Chloro-2-nitroaniline (CAS RN 89-63-4)0 %31.12.2013
ex29214200822-Chloro-4-nitroaniline (CAS RN 121-87-9)0 %31.12.2015
ex29214200853,5-Dichloroaniline (CAS RN 626-43-7)0 %31.12.2013
ex29214300105-Amino-2-chlorotoluene-4-sulphonic acid (CAS RN 88-53-9)0 %31.12.2013
ex29214300204-Amino-6-chlorotoluene-3-sulphonic acid0 %31.12.2013
ex29214300303-Nitro-p-toluidine (CAS RN 119-32-4)0 %31.12.2013
ex29214300404-Aminotoluene-3-sulphonic acid (CAS RN 88-44-8)0 %31.12.2013
ex29214300504-Aminobenzotrifluoride (CAS RN 455-14-1)0 %31.12.2015
ex29214300603-Aminobenzotrifluoride (CAS RN 98-16-8)0 %31.12.2015
ex2921430070N-Ethyl-m-toluidine (CAS RN 102-27-2)0 %31.12.2016
ex2921440020Diphenylamine (CAS RN 122-39-4)0 %31.12.2013
ex2921450010Sodium hydrogen 3-aminonaphthalene-1,5-disulphonate0 %31.12.2013
ex29214500202-Aminonaphthalene-1,5-disulphonic acid and its sodium salts0 %31.12.2013
ex29214500401-Naphthylamine (CAS RN 134-32-7)0 %31.12.2013
ex2921490020Pendimethalin (ISO) (CAS RN 40487-42-1)3,5 %31.12.2013
ex2921490040N-1-Naphthylaniline (CAS RN 90-30-2)0 %31.12.2013
ex2921490060N-Benzyl-N-ethylaniline (CAS RN 92-59-1)0 %31.12.2014
ex29214900702-Chlorobenzylamine (CAS RN 89-97-4)0 %31.12.2015
ex29214900804-Heptafluoroisopropyl-2-methylaniline (CAS RN 238098-26-5)0 %31.12.2015
ex2921511920Toluene diamine (TDA), containing by weight 78 % or more but not more than 82 % of 4-methyl-m-phenylenediamine and 18 % or more but not more than 22 % of 2-methyl-m-phenylenediamine, and with a residual tar content of not more than 0,23 % by weight0 %31.12.2013
ex29215119302-Methyl-p-phenylenediamine sulphate (CAS RN 615-50-9)0 %31.12.2013
ex2921511940p-Phenylenediamine (CAS RN 106-50-3)0 %31.12.2016
ex2921511950Mono- and dichloroderivatives of p-phenylenediamine and p-diaminotoluene0 %31.12.2013
ex2921599010Mixture of isomers of 3,5-diethyltoluenediamine0 %31.12.2013
ex29215990303,3′-Dichlorobenzidine dihydrochloride (CAS RN 612-83-9)0 %31.12.2012
ex29215990404,4′-Diaminostilbene-2,2′-disulphonic acid (CAS RN 81-11-8)0 %31.12.2013
ex2921599050N-Ethyl-N′,N′-dimethyl-N-phenyl-ethylene-1,2-diamine (CAS RN 27692-91-7)0 %31.12.2014
ex2922198530N,N,N′,N′-Tetramethyl-2,2′-oxybis(ethylamine) (CAS RN 3033-62-3)0 %31.12.2013
ex29221985402-(Dimethylamino)ethyl benzoate (CAS RN 2208-05-1)0 %31.12.2014
ex29221985452-[2-Hydroxyethyl(octadecyl)amino]ethanol (CAS RN 10213-78-2)0 %31.12.2016
ex29221985502-(2-Methoxyphenoxy)ethylamine (CAS RN 1836-62-0)0 %31.12.2013
ex29221985552-[N-(2-Hydroxyethyl)-4-methylanilino]ethanol (CAS RN 3077-12-1)0 %31.12.2016
ex2922198560N,N,N′ -trimethyl- N′ -(2-hydroxy-ethyl) 2,2′-oxybis(ethylamine), (CAS RN 83016-70-0)0 %31.12.2013
ex2922198570D-(-)-threo-2-amino-1-(p-nitrophenyl)propane-1,3-diol (CAS RN 716-61-0)0 %31.12.2016
ex2922198580N-[2-[2-(Dimethylamino)ethoxy]ethyl]-N-methyl-1,3-propanediamine, (CAS RN 189253-72-3)0 %31.12.2014
ex29222100102-Amino-5-hydroxynaphthalene-1,7-disulphonic acid and its salts, of a purity by weight of 60 % or more0 %31.12.2013
ex29222100306-Amino-4-hydroxynaphthalene-2-sulphonic acid (CAS RN 90-51-7)0 %31.12.2013
ex29222100407-Amino-4-hydroxynaphthalene-2-sulphonic acid (CAS RN 87-02-5)0 %31.12.2013
ex2922210050Sodium hydrogen 4-amino-5-hydroxynaphthalene-2,7-disulphonate, (CAS RN 5460-09-3)0 %31.12.2013
ex29222900102-Methyl-N-phenyl-p-anisidine0 %31.12.2013
ex29222900203-Aminophenol (CAS RN 591-27-5)0 %31.12.2013
ex29222900255-Amino-o-cresol (CAS RN 2835-95-2)0 %31.12.2013
ex2922290045Anisidines0 %31.12.2013
ex2922290046p-Anisidine-3-sulphonic acid (CAS RN 13244-33-2)0 %31.12.2013
ex29222900506-Methoxy-m-toluidine0 %31.12.2013
ex29222900553-Amino-4-hydroxybenzenesulphonic acid (CAS RN 98-37-3)0 %31.12.2014
ex29222900654-Trifluoromethoxyaniline (CAS RN 461-82-5)0 %31.12.2014
ex29222900704-Nitro-o-anisidine (CAS RN 97-52-9)0 %31.12.2013
ex29222900754-(2-Aminoethyl)phenol (CAS RN 51-67-2)0 %31.12.2015
ex29222900803-Diethylaminophenol (CAS RN 91-68-9)0 %31.12.2013
ex29223900101-Amino-4-bromo-9,10-dioxoanthracene-2-sulphonic acid and its salts0 %31.12.2013
ex29223900202-Amino-5-chlorobenzophenone (CAS RN 719-59-5)0 %31.12.2015
ex2922390070p-[(2-Chloroethyl)ethylamino]benzaldehyde (CAS RN 2643-07-4)0 %31.12.2016
ex2922430010Anthranilic acid (CAS RN 118-92-3)0 %31.12.2013
ex2922498510Ornithine aspartate (INNM)0 %31.12.2013
ex2922498515DL-Aspartic acid used for the manufacture of food-integrators, (CAS RN 617-45-8)0 %31.12.2014
ex2922498540Norvaline0 %31.12.2013
ex2922498545Glycine (CAS RN 56-40-6)0 %31.12.2015
ex2922498550D-(-)-Dihydrophenylglycine (CAS RN 26774-88-9)0 %31.12.2013
ex2922498560Ethyl-4-dimethylaminobenzoate (CAS RN 10287-53-3)0 %31.12.2012
ex29224985702-Ethylhexyl-4-dimethylaminobenzoate (CAS RN 21245-02-3)0 %31.12.2013
ex29225000201-[2-Amino-1-(4-methoxyphenyl)-ethyl]-cyclohexanol hydrochloride, (CAS RN 130198-05-9)0 %31.12.2014
ex29225000404,4-Dimethoxybutylamine (CAS RN 19060-15-2)0 %31.12.2013
ex29225000702-(1-Hydroxycyclohexyl)-2-(4-methoxyphenyl)ethylammonium acetate0 %31.12.2013
ex2923900010Tetramethylammonium hydroxide, in the form of an aqueous solution containing 25 % (± 0,5 %) by weight of tetramethylammonium hydroxide0 %31.12.2013
ex2923900025Tetrakis(dimethylditetradecylammonium) molybdate, (CAS RN 117342-25-3)0 %31.12.2013
ex2923900045Tetrabutylammonium hydroxide in the form of an aqueous solution containing 55 % (± 1 %) by weight of tetrabutylammonium hydroxide, (CAS RN 2052-49-5)0 %31.12.2014
ex2923900070Tetrapropylammonium hydroxide, in the form of an aqueous solution containing:40 % (± 2 %) by weight of tetrapropylammonium hydroxide,0,3 % by weight or less of carbonate,0,1 % by weight or less of tripropylamine,500 mg/kg or less of bromide, and25 mg/kg or less of potassium and sodium taken together0 %31.12.2013
ex2923900075Tetraethylammonium hydroxide, in the form of an aqueous solution containing:35 % (± 0,5 %) by weight of tetraethylammonium hydroxide,not more than 1000 mg/kg of chloride,not more than 2 mg/kg of iron, andnot more than 10 mg/kg of potassium0 %31.12.2015
ex2923900080Diallyldimethylammonium chloride, in the form of an aqueous solution containing by weight 63 % or more but not more than 67 % of diallyldimethylammonium chloride, (CAS RN 7398-69-8)0 %31.12.2013
ex29241900102-Acrylamido-2-methylpropanesulphonic acid and its sodium or ammonium salts0 %31.12.2013
ex2924190030Methyl 2-acetamido-3-chloropropionate (CAS RN 87333-22-0)0 %31.12.2013
ex2924190040N-(1,1-Dimethyl-3-oxobutyl)acrylamide (CAS RN 2873-97-4)0 %31.12.2013
ex2924190050Acrylamide (CAS RN 79-06-1)0 %31.12.2013
ex2924190060N,N-Dimethylacrylamide (CAS RN 2680-03-7)0 %31.12.2016
ex2924190070Methylcarbamate (CAS RN 598-55-0)0 %31.12.2013
ex29242100104,4′-Dihydroxy-7,7′-ureylenedi(naphthalene-2-sulfonic acid) and its sodium salts0 %31.12.2013
ex2924299810Alachlor (ISO), (CAS RN 15972-60-8)0 %31.12.2013
ex2924299815Acetochlor (ISO), (CAS RN 34256-82-1)0 %31.12.2013
ex29242998202-Chloro-N-(2-ethyl-6-methylphenyl)-N-(propan-2-yloxymethyl)acetamide, (CAS RN 86763-47-5)0 %31.12.2014
ex29242998223,3′-Bis(3,5-di-tert-butyl-4-hydroxyphenyl)- N,N′ -hexamethylenedipropionamide (CAS RN 23128-74-7)0 %31.12.2016
ex29242998253′-Diethylaminoacetanilide0 %31.12.2013
ex29242998272-Bromo-4-fluoroacetanilide (CAS RN 1009-22-9)0 %31.12.2016
ex2924299830Propachlor (ISO) (CAS RN 1918-16-7)0 %31.12.2013
ex29242998352′-Methoxyacetoacetanilide (CAS RN 92-15-9)0 %31.12.2015
ex2924299840N,N′-1,4-Phenylenebis[3-oxobutyramide], (CAS RN 24731-73-5)0 %31.12.2015
ex2924299845Propoxur (ISO) (CAS RN 114-26-1)0 %31.12.2015
ex2924299850N,N′-(2,5-Dichloro-1,4-phenylene)bis[3-oxobutyramide], (CAS RN 42487-09-2)0 %31.12.2015
ex2924299855N,N′-(2,5-Dimethyl-1,4-phenylene)bis[3-oxobutyramide], (CAS RN 24304-50-5)0 %31.12.2015
ex2924299860N,N′-(2-Chloro-5-methyl-1,4-phenylene)bis[3-oxobutyramide], (CAS RN 41131-65-1)0 %31.12.2015
ex29242998652-(4-Hydroxyphenyl)acetamide (CAS RN 17194-82-0)0 %31.12.2013
ex29242998753-Amino-p-anisanilide (CAS RN 120-35-4)0 %31.12.2013
ex29242998805′-Chloro-3-hydroxy-2′,4′-dimethoxy-2-naphthanilide0 %31.12.2013
ex2924299885p-Aminobenzamide (CAS RN 2835-68-9)0 %31.12.2013
ex2924299886Anthranilamide of a purity by weight of 99,5 % or more (CAS RN 88-68-6)0 %31.12.2012
ex2924299887Paracetamol (INN) (CAS RN 103-90-2)0 %31.12.2013
ex29242998885′-Chloro-3-hydroxy-2′-methyl-2-naphthanilide (CAS RN 135-63-7)0 %31.12.2013
ex2924299889Flutolanil (ISO) (CAS RN 66332-96-5)0 %31.12.2013
ex29242998913-Hydroxy-2′-methoxy-2-naphthanilide (CAS RN 135-62-6)0 %31.12.2013
ex29242998923-Hydroxy-2-naphthanilide (CAS RN 92-77-3)0 %31.12.2013
ex29242998933-Hydroxy-2′-methyl-2-naphthanilide0 %31.12.2013
ex29242998942′-Ethoxy-3-hydroxy-2-naphthanilide (CAS RN 92-74-0)0 %31.12.2013
ex29242998964′-Chloro-3-hydroxy-2′,5′-dimethoxy-2-naphthanilide (CAS RN 4273-92-1)0 %31.12.2013
ex29242998971,1-Cyclohexanediacetic acid monoamide (CAS RN 99189-60-3)0 %31.12.2013
ex2925110020Saccharin and its sodium salt0 %31.12.2013
ex2925199510N-Phenylmaleimide (CAS RN 941-69-5)0 %31.12.2013
ex2925290010Dicyclohexylcarbodiimide (CAS RN 538-75-0)0 %31.12.2013
ex29269095202-(m-Benzoylphenyl)propiononitrile0 %31.12.2013
ex29269095252,2-Dibromo-3-nitrilopropionamide (CAS RN 10222-01-2)0 %31.12.2016
ex29269095302-Amino-3-(3,4-dimethoxyphenyl)-2-methylpropanenitrile hydrochloride, (CAS RN 2544-13-0)0 %31.12.2015
ex29269095352-Bromo-2(bromomethyl)pentanedinitrile0 %31.12.2013
ex29269095452-Cyanoacetamide (CAS RN 107-91-5)0 %31.12.2013
ex2926909550Alkyl or alkoxyalkyl esters of cyanoacetic acid0 %31.12.2013
ex2926909555Methyl-2-cyano-2-phenylbutyrate (CAS RN 24131-07-5)0 %31.12.2016
ex2926909560Cyanoacetic acid in crystalline form0 %31.12.2013
ex2926909561m-(1-Cyanoethyl)benzoic acid (CAS RN 5537-71-3)0 %31.12.2016
ex29269095631-(Cyanoacetyl)-3-ethylurea (CAS RN 41078-06-2)0 %31.12.2014
ex2926909564Esfenvalerate of a purity by weight of 83 % or more in a mixture of its own isomers (CAS RN 66230-04-4)0 %31.12.2014
ex2926909565Malononitrile0 %31.12.2013
ex2926909570Methacrylonitrile (CAS RN 126-98-7)0 %31.12.2014
ex2926909574Chlorothalonil (ISO) (CAS RN 1897-45-6)0 %31.12.2014
ex2926909575Ethyl 2-cyano-2-ethyl-3-methylhexanoate (CAS RN 100453-11-0)0 %31.12.2014
ex2926909580Ethyl 2-cyano-2-phenylbutyrate (CAS RN 718-71-8)0 %31.12.2013
ex29269095814-Aminobenzonitrile (CAS RN 873-74-5)0 %31.12.2013
ex2926909586Ethylenediaminetetraacetonitrile (CAS RN 5766-67-6)0 %31.12.2013
ex2926909587Nitrilotriacetonitrile (CAS RN 7327-60-8)0 %31.12.2013
ex29269095881,3-Propylenediaminetetraacetonitrile0 %31.12.2013
ex2926909589Butyronitrile0 %31.12.2013
ex29270000102,2′-Dimethyl-2,2′-azodipropionamidine dihydrochloride0 %31.12.2013
ex29270000204-Anilino-2-methoxybenzenediazonium hydrogen sulphate0 %31.12.2013
ex29270000304′-Aminoazobenzene-4-sulphonic acid (CAS RN 104-23-4)0 %31.12.2013
ex29270000402-Hydroxynaphthalene-1-diazonium-4-sulphonate0 %31.12.2013
ex29270000502-Hydroxy-6-nitronaphthalene-1-diazonium-4-sulphonate, of a purity by weight of 60 % or more0 %31.12.2013
ex29270000604,4′-Dicyano-4,4′-azodivaleric acid (CAS RN 2638-94-0)0 %31.12.2013
ex2927000070Tetrasodium 3,3′-[azoxybis[(2-methoxy-4,1-phenylene)azo]]bis[4,5-dihydroxynaphthalene-2,7-disulphonate], (CAS RN 83968-64-3)0 %31.12.2014
ex29280090103,3′-Bis(3,5-di-tert-butyl-4-hydroxyphenyl)-N,N′-bipropionamide0 %31.12.2013
ex29280090202,4,6-Trichlorophenylhydrazine0 %31.12.2013
ex2928009025Acetaldehyde oxime in an aqueous solution (CAS RN 107-29-9)0 %31.12.2015
ex2928009040O-Ethylhydroxylamine, in the form of an aqueous solution0 %31.12.2013
ex2928009060Adipohydrazide0 %31.12.2013
ex2928009070Butanone oxime (CAS RN 96-29-7)0 %31.12.2013
ex2928009075Metaflumizone (ISO) (CAS RN 139968-49-3)0 %31.12.2016
ex2928009080Cyflufenamid (ISO) (CAS RN 180409-60-3)0 %31.12.2013
ex2928009085Daminozide (ISO) with a purity by weight of 99 % or more (CAS RN 1596-84-5)0 %31.12.2016
ex2929100010Methylenedicyclohexyl diisocyanates0 %31.12.2013
ex29291000153,3′-Dimethylbiphenyl-4,4′-diyl diisocyanate (CAS RN 91-97-4)0 %31.12.2014
ex2929100040m-Isopropenyl-α,α-dimethylbenzyl isocyanate0 %31.12.2013
ex2929100050m-Phenylenediisopropylidene diisocyanate0 %31.12.2013
ex29291000552,5 (and 2,6)-Bis(isocyanatomethyl)bicyclo[2.2.1]heptane (CAS RN 74091-64-8)0 %31.12.2015
ex2929100060Trimethylhexamethylene diisocyanate, mixed isomers0 %31.12.2013
ex29291000801,3-Bis(isocyanatomethyl)benzene (CAS RN 3634-83-1)0 %31.12.2016
ex2930200010Prosulfocarb (ISO) (CAS RN 52888-80-9)0 %31.12.2012
ex29302000202-Isopropylethylthiocarbamate (CAS RN 141-98-0)0 %31.12.2016
ex29309099102,3-Bis((2-mercaptoethyl)thio)-1-propanethiol (CAS RN 131538-00-6)0 %31.12.2015
ex2930909915Ethoprophos (ISO) (CAS RN 13194-48-4)0 %31.12.2013
ex29309099202-Methoxy-N-[2-nitro-5-(phenylthio)phenyl]acetamide (CAS RN 63470-85-9)0 %31.12.2015
ex2930909925Thiophanate-methyl (ISO), (CAS RN 23564-05-8)0 %31.12.2013
ex29309099304-(4-Isopropoxyphenylsulphonyl)phenol0 %31.12.2013
ex2930909935Glutathione (CAS RN 70-18-8)0 %31.12.2016
ex29309099403,3′-Thiodi(propionic acid) (CAS RN 111-17-1)0 %31.12.2013
ex29309099452-[(p-Aminophenyl)sulphonyl]ethyl hydrogen sulphate0 %31.12.2013
ex2930909950[S-(R*,R*)]-2-Amino-1-[4-(methylthio)-phenyl]-1,3-propanediol, (CAS RN 23150-35-8)0 %31.12.2015
ex2930909955Thiourea (CAS RN 62-56-6)0 %31.12.2015
ex2930909960Methyl phenyl sulphide0 %31.12.2013
ex2930909962Zinc bis(benzenesulfinate) (CAS RN 24308-84-7)0 %31.12.2014
ex29309099643-Chloro-2-methylphenyl methyl sulphide (CAS RN 82961-52-2)0 %31.12.2014
ex2930909965Pentaerythritol tetrakis(3-mercaptopropionate) (CAS RN 7575-23-7)0 %31.12.2015
ex2930909966Diphenyl sulphide (CAS RN 139-66-2)0 %31.12.2012
ex29309099673-Bromomethyl-2-chloro-4-(methylsulphonyl)-benzoic acid0 %31.12.2012
ex2930909968Clethodim (ISO) (CAS RN 99129-21-2)0 %31.12.2012
ex29309099692-Amino-4-methylsulphonyl-N-methylaniline (CAS RN 73097-51-5)0 %31.12.2012
ex2930909971Triphenylsulphonium chloride (CAS RN 4270-70-6)0 %31.12.2012
ex29309099762,2′-Dithiodi(benzoic acid) (CAS RN 119-80-2)0 %31.12.2013
ex29309099774-[4-(2-Propenyloxy)phenylsulphonyl]phenol (CAS RN 97042-18-7)0 %31.12.2013
ex29309099784-Mercaptomethyl-3,6-dithia-1,8-octanedithiol (CAS RN 131538-00-6)0 %31.12.2016
ex2930909980Captan (ISO) (CAS RN 133-06-2)0 %31.12.2013
ex2930909981Disodium hexamethylene-1,6-bisthiosulfate dihydrate (CAS RN 5719-73-3)3 %31.12.2014
ex2930909982Sodium toluene-4-sulphinate (CAS RN 824-79-3)0 %31.12.2012
ex2930909983Methyl-p-tolyl sulphone (CAS RN 3185-99-7)0 %31.12.2012
ex29309099842-Chloro-4-(methylsulphonyl)benzoic acid (CAS RN 53250-83-2)0 %31.12.2014
ex29309099864-Hydroxybenzenethiol (CAS RN 637-89-8)0 %31.12.2013
ex29309099873-Sulphinobenzoic acid0 %31.12.2013
ex2930909989Potassium- or sodium-salt of O-ethyl-, O-isopropyl-, O-butyl-, O-isobutyl- or O-pentyl-dithiocarbonates0 %31.12.2016
29319010Dimethyl methylphosphonate (CAS RN 756-79-6)0 %31.12.2013
ex2931909005Butylethylmagnesium, in the form of a solution in heptane0 %31.12.2013
ex2931909010Diethylmethoxyborane (CAS RN 7397-46-8)0 %31.12.2015
ex2931909015Triethylborane (CAS RN 97-94-9)0 %31.12.2015
ex2931909020Methylcyclopentadienyl manganese tricarbonyl containing not more than 4,9 % by weight of cyclopentadienyl manganese tricarbonyl, (CAS RN 12108-13-3)0 %31.12.2013
ex2931909024Methyl tris (2-pentanoneoxime) silane0 %31.12.2014
ex2931909030Diethylborane isopropoxide (CAS RN 74953-03-0)0 %31.12.2015
ex2931909040N-(Phosphonomethyl)iminodiacetic acid0 %31.12.2013
ex2931909050Bis(2,4,4-trimethylpentyl)phosphinic acid (CAS RN 83411-71-6)0 %31.12.2013
ex2931909055Dimethyl[dimethylsilyldiindenyl]hafnium0 %31.12.2014
ex2931909070N,N-Dimethylanilinium tetrakis(pentafluorophenyl)borate0 %31.12.2014
ex2931909072Phenylphosphonic dichloride (CAS RN 824-72-6)0 %31.12.2016
ex2931909075Tetrakis(hydroxymethyl)phosphonium chloride (CAS RN 124-64-1)0 %31.12.2016
ex2931909085Tributyl(tetradecyl)phosphonium chloride, whether or not in the form of an aqueous solution0 %31.12.2013
ex2931909086Mixture of the isomers 9-icosyl-9-phosphabicyclo[3.3.1]nonane and 9-icosyl-9-phosphabicyclo[4.2.1]nonane0 %31.12.2013
ex2931909087Tris(4-methylpentan-2-oximino)methylsilane0 %31.12.2013
ex2931909089Tetrabutylphosphonium acetate in the form of an aqueous solution (CAS RN 30345-49-4)0 %31.12.2014
ex2931909091Trimethylsilane0 %31.12.2016
ex2931909092Trimethylborane (CAS RN 593-90-8)0 %31.12.2014
ex29319090963-(Hydroxyphenylphosphinoyl)propionic acid (CAS RN 14657-64-8)0 %31.12.2013
ex2931909097Potassium 4-tolylphosphinate, in the form of an aqueous solution (CAS RN 208534-39-8)0 %31.12.2013
ex2932130010Tetrahydrofurfuryl alcohol (CAS RN 97-99-4)0 %31.12.2013
ex2932190040Furan of a purity by weight of 99 % or more0 %31.12.2013
ex29321900412,2 di(tetrahydrofuryl)propane (CAS RN 89686-69-1)0 %31.12.2013
ex29321900451,6-Dichloro-1,6-dideoxy-β-D-fructofuranosyl-4-chloro-4-deoxy-α-D-galactopyranoside, (CAS RN 56038-13-2)0 %31.12.2014
ex29321900502-Methylfuran (CAS RN 534-22-5)0 %31.12.2015
ex2932190070Furfurylamine (CAS RN 617-89-0)0 %31.12.2013
ex2932190075Tetrahydro-2-methylfuran (CAS RN 96-47-9)0 %31.12.2013
ex29321900805-Nitrofurfurylidene di(acetate) (CAS RN 92-55-7)0 %31.12.2016
ex29322090102′-Anilino-6′-[ethyl(isopentyl)amino]-3′-methylspiro[isobenzofuran-1(3H),9′-xanthen]-3-one0 %31.12.2013
ex2932209015Coumarin (CAS RN 91-64-5)0 %31.12.2016
ex29322090356′-Diethylamino-3′-methyl-2′-(2,4-xylidino)spiro[isobenzofuran-1(3H),9′-xanthen]-3-one0 %31.12.2013
ex29322090556-Dimethylamino-3,3-bis(4-dimethylaminophenyl)phthalide0 %31.12.2013
ex29322090606′-(Diethylamino)-3′-methyl-2′-(phenylamino)-spiro[isobenzofuran-1(3H),9′-[9H]xanthen]-3-one0 %31.12.2016
ex29322090703′,6′-Bis(ethylamino)-2′,7′-dimethylspiro[isobenzofuran-1(3H),9′-[9H]-xanthen]-3-one, (CAS RN 41382-37-0)0 %31.12.2013
ex29322090716′-(Dibutylamino)-3′-methyl-2′-(phenylamino)-spiro[isobenzofuran-1(3H),9′-[9H]xanthen]-3-one0 %31.12.2016
ex29322090722′-[Bis(phenylmethyl)amino]-6′-(diethylamino)-spiro[isobenzofuran-1(3H),9′-[9H]xanthen]-3-one0 %31.12.2016
ex2932209080Gibberellic acid with a minimum purity by weight of 88 % (CAS RN 77-06-5)0 %31.12.2013
ex2932209084Decahydro-3a,6,6,9a-tetramethylnaphth [2,1-b] furan-2 (1H)-one (CAS RN 564-20-5)0 %31.12.2013
ex2932209085Hexan-4-olide (CAS RN 695-06-7)0 %31.12.2013
ex2932990010Bendiocarb (ISO) (CAS RN 22781-23-3)0 %31.12.2013
ex29329900151,3,4,6,7,8-Hexahydro-4,6,6,7,8,8-hexamethylindeno[5,6-c]pyran (CAS RN 1222-05-5)0 %31.12.2016
ex2932990030Carbofuran (ISO) (CAS RN 1563-66-2)0 %31.12.2013
ex29329900351,2,3-Trideoxy-4,6:5,7-bis-O-[(4-propylphenyl)methylene]-nonitol, (CAS RN 882073-43-0)0 %31.12.2013
ex29329900401,3:2,4-Bis-O-(3,4-dimethylbenzylidene)-D-glucitol (CAS RN 135861-56-2)0 %31.12.2013
ex29329900507-Methyl-3,4-dihydro-2H-1,5-benzodioxepin-3-one (CAS RN 28940-11-6)0 %31.12.2015
ex2932990060(3aR,5aS,9aS,9bR)-3a,6,6,9a-Tetramethyl-2,4,5,5a,7,8,9,9b-octahydro-1H-benzo[e][1]benzofuran, (CAS RN 6790-58-5)0 %31.12.2015
ex29329900701,3:2,4-bis-O-Benzylidene-D-glucitol (CAS RN 32647-67-9)0 %31.12.2016
ex29329900753-(3,4-Methylenedioxyphenyl)-2-methylpropanal (CAS RN 1205-17-0)0 %31.12.2016
ex29329900801,3:2,4-bis-O-(4-Methylbenzylidene)-D-glucitol (CAS RN 32647-67-9)0 %31.12.2016
ex29331990303-Methyl-1-p-tolyl-5-pyrazolone (CAS RN 86-92-0)0 %31.12.2013
ex2933199040Edaravone (INN) (CAS RN 89-25-8)0 %31.12.2013
ex2933199050Fenpyroximate (ISO) (CAS RN 134098-61-6)0 %31.12.2013
ex2933199060Pyraflufen-ethyl (ISO) (CAS RN 129630-19-9)0 %31.12.2013
ex29331990704,5-Diamino-1-(2-hydroxyethyl)-pyrazolsulphate (CAS RN 155601-30-2)0 %31.12.2013
ex2933210010Hydantoin (CAS RN 461-72-3)0 %31.12.2013
ex29332100501-Bromo-3-chloro-5,5-dimethylhydantoin (CAS RN 16079-88-2)0 %31.12.2016
ex2933210060DL-p-Hydroxyphenylhydantoin (CAS RN 2420-17-9)0 %31.12.2016
ex2933210070α-(4-Methoxybenzoyl)-α-(1-benzyl-5-ethoxy-3-hydantoinyl)-2-chloro-5-dodecyloxycarbonylacetanilide, (CAS RN 70950-45-7)0 %31.12.2016
ex29332100805,5-Dimethylhydantoin0 %31.12.2015
ex2933299040Triflumizole (ISO)0 %31.12.2013
ex29332990501,3-Dimethylimidazolidin-2-one (CAS RN 80-73-9)0 %31.12.2013
ex29332990601-Cyano-2-methyl-1-[2-(5-methylimidazol-4-ylmethylthio)ethyl]isothiourea (CAS RN 52378-40-2)0 %31.12.2016
ex2933399915Pyridine-2,3-dicarboxylic acid (CAS RN 89-00-9)0 %31.12.2013
ex2933399920Copper pyrithione powder (CAS RN 14915-37-8)0 %31.12.2014
ex29333999242-Chloromethyl-4-methoxy-3,5-dimethylpyridine hydrochloride (CAS RN 86604-75-3)0 %31.12.2014
ex2933399925Imazethapyr (ISO)0 %31.12.2013
ex2933399930Fluazinam (ISO) (CAS RN 79622-59-6)0 %31.12.2014
ex29333999322-(Chloromethyl)-3,4-dimethoxypyridine hydrochloride (CAS RN 72830-09-2)0 %31.12.2016
ex2933399935Aminopyralid (ISO) (CAS RN 150114-71-9)0 %31.12.2013
ex2933399937Aqueous solution of pyridine-2-thiol-1-oxide, sodium salt (CAS RN 3811-73-2)0 %31.12.2016
ex29333999402-Chloropyridine (CAS RN 109-09-1)0 %31.12.2013
ex29333999422,2,6,6-Tetramethylpiperidine (CAS RN 768-66-1)0 %31.12.2016
ex29333999455-Difluoromethoxy-2-[[(3,4-dimethoxy-2-pyridyl)methyl]thio]-1H-benzimidazole, (CAS RN 102625-64-9)0 %31.12.2014
ex2933399947(-)-trans-4-(4′-Fluorophenyl)-3-hydroxymethyl-N-methylpiperidine (CAS RN 105812-81-5)0 %31.12.2014
ex2933399948Flonicamid (ISO) (CAS RN 158062-67-0)0 %31.12.2014
ex29333999492-[[[3-Methyl-4-(2,2,2-trifluoroethoxy)-2-pyridinyl]methyl]thio]-1H-benzimidazole, (CAS RN 103577-40-8)0 %31.12.2015
ex2933399950N-Fluoro-2,6-dichloropyridinium tetrafluoroborate (CAS RN 140623-89-8)0 %31.12.2016
ex2933399955Pyriproxyfen (ISO) of a purity by weight of 97 % or more (CAS RN 95737-68-1)0 %31.12.2014
ex29333999602-Fluoro-6-(trifluoromethyl)pyridine (CAS RN 94239-04-0)0 %31.12.2013
ex2933399965Acetamiprid (ISO) (CAS RN 135410-20-7)0 %31.12.2013
ex2933399975Picolinafen (ISO) (CAS RN 137641-05-5)0 %31.12.2013
ex29333999852-Chloro-5-chloromethylpyridine (CAS RN 70258-18-3)0 %31.12.2015
ex2933491010Quinmerac (ISO) (CAS RN 90717-03-6)0 %31.12.2013
ex29334910203-Hydroxy-2-methylquinoline-4-carboxylic acid (CAS RN 117-57-7)0 %31.12.2013
ex2933499030Quinoline (CAS RN 91-22-5)0 %31.12.2015
ex2933499040Isoquinoline (CAS RN 119-65-3)0 %31.12.2015
ex2933499050Methyl 2-[(S)-3-{(E)-3-[2-(7-chloro-2-quinolyl)vinyl]phenyl}-3-hydroxypropyl] benzoate monohydrate0 %31.12.2013
ex29334990605,6,7,8-Tetrahydroquinoline (CAS RN 10500-57-9)0 %31.12.2013
ex2933499070Quinolin-8-ol (CAS RN 148-24-3)0 %31.12.2013
ex2933520010Malonylurea (barbituric acid) (CAS RN 67-52-7)0 %31.12.2016
ex2933599515(2R)-4-Oxo-4-[3-(trifluoromethyl)-5,6-dihydro[1,2,4]triazolo[4,3-a] pyrazin-7(8H)-yl]-1-(2,4,5-trifluorophenyl)butyl-2-ammonium phosphate monohydrate0 %31.12.2013
ex29335995202,4-Diamino-6-chloropyrimidine0 %31.12.2013
ex29335995252,5-Diamino-4,6-dihydroxypyrimidine monohydrochloride monohydrate0 %31.12.2013
ex2933599530Mepanipyrim (ISO) (CAS RN 110235-47-7)0 %31.12.2013
ex2933599540Guanine (CAS RN 73-40-5)0 %31.12.2013
ex29335995451-[3-(Hydroxymethyl)pyridin-2-yl]-4-methyl-2-phenylpiperazine (CAS RN 61337-89-1)0 %31.12.2014
ex29335995502-(2-Piperazin-1-ylethoxy)ethanol (CAS RN 13349-82-1)0 %31.12.2014
ex2933599555Thiopental (INNM) (CAS RN 76-75-5)0 %31.12.2014
ex29335995602,6-Dichloro-4,8-dipiperidinopyrimido[5,4-d]pyrimidine (CAS RN 7139-02-8)0 %31.12.2013
ex29335995651-Chloromethyl-4-fluoro-1,4-diazoniabicyclo[2.2.2]octane bis(tetrafluoroborate), (CAS RN 140681-55-6)0 %31.12.2014
ex2933599570N-(4-Ethyl-2,3-dioxopiperazin-1-ylcarbonyl)-D-2-phenylglycine (CAS RN 63422-71-9)0 %31.12.2013
ex2933599575(2R,3S/2S,3R)-3-(6-Chloro-5-fluoro pyrimidin-4-yl)-2-(2,4-difluorophenyl)-1-(1H-1,2,4-triazol-1-yl)butan-2-ol hydrochloride, (CAS RN 188416-20-8)0 %31.12.2014
ex29336980201,3,5-Tris[(3,5-di-tert-butyl-4-hydroxyphenyl)methyl]-1,3,5-triazine-2,4,6(1H,3H,5H)-trione0 %31.12.2013
ex29336980251,3,5-Triazine-2,4,6-triamine monophosphate (CAS RN 20208-95-1)0 %31.12.2016
ex29336980301,3,5-Tris[3-(dimethylamino)propyl]hexahydro-1,3,5-triazine (CAS RN 15875-13-5)0 %31.12.2014
ex29336980351,3,5-Triazine-2,4,6(1H,3H,5H)-trione, compound with 1,3,5-triazine-2,4,6-triamine (1:1) (CAS RN 37640-57-6)0 %31.12.2016
ex2933698040Troclosene sodium (INNM) (CAS RN 2893-78-9)0 %31.12.2016
ex29336980501,3,5-Tris(2,3-dibromopropyl)-1,3,5-triazinane-2,4,6-trione (CAS RN 52434-90-9)0 %31.12.2013
ex2933698055Terbutryn (ISO) (CAS RN 886-50-0)0 %31.12.2015
ex2933698060Cyanuric acid (CAS RN 108-80-5)0 %31.12.2015
ex29336980652-(4,6-Diphenyl-1,3,5-triazin-2-yl)-5-[(hexyl)oxy]-phenol (CAS RN 147315-50-2)0 %31.12.2016
ex2933698080Tris(2-hydroxyethyl)-1,3,5-triazinetrione (CAS RN 839-90-7)0 %31.12.2013
ex2933790010Ezetimibe (INN) (CAS RN 163222-33-1)0 %31.12.2013
ex29337900305-Vinyl-2-pyrrolidone (CAS RN 7529-16-0)0 %31.12.2012
ex29337900506-Bromo-3-methyl-3H-dibenz(f,ij)isoquinoline-2,7-dione (CAS RN 81-85-6)0 %31.12.2013
ex29337900603,3-Pentamethylene-4-butyrolactam (CAS RN 64744-50-9)0 %31.12.2014
ex2933790070(S)-N-[(Diethylamino)methyl]-alpha-ethyl-2-oxo-1-pyrrolidineacetamide L-(+)-tartrate, (CAS RN 754186-36-2)0 %31.12.2015
ex29339980102-(2H-Benzotriazol-2-yl)-4,6-di-tert-butylphenol (CAS RN 3846-71-7)0 %31.12.2013
ex29339980135-Difluormethoxy-2-mercapto-1-H-benzimidazole (CAS RN 97963-62-7)0 %31.12.2016
ex29339980152-(2H-Benzotriazol-2-yl)-4,6-di-tert-pentylphenol (CAS RN 25973-55-1)0 %31.12.2013
ex29339980202-(2H-Benzotriazol-2-yl)-4,6-bis(1-methyl-1-phenylethyl)phenol0 %31.12.2013
ex29339980256,6′-Di-2H-benzotriazol-2-yl-4,4′-bis(1,1,3,3-tetramethylbutyl)-2,2′-methylenediphenol0 %31.12.2013
ex2933998030Quizalofop-P-ethyl (ISO) (CAS RN 100646-51-3)0 %31.12.2013
ex29339980325-[4′-(Bromomethyl)biphenyl-2-yl]-2-trityl-2H-tetrazole (CAS RN 133051-88-4)0 %31.12.2014
ex29339980351,3,3-Trimethyl-2-methyleneindoline (CAS RN 118-12-7)0 %31.12.2014
ex29339980378-Chloro-5,10-dihydro-11H-dibenzo [b,e] [1,4]diazepin-11-one (CAS RN 50892-62-1)0 %31.12.2014
ex2933998040trans-4-Hydroxy-L-proline (CAS RN 51-35-4)0 %31.12.2013
ex2933998045Maleic hydrazide (ISO)0 %31.12.2013
ex2933998050Metconazole (ISO) (CAS RN 125116-23-6)3,2 %31.12.2013
ex2933998055Pyridaben (ISO) (CAS RN 96489-71-3)0 %31.12.2014
ex29339980601,3-Bis(3-isocyanatomethylphenyl)-1,3-diazetidine-2,4-dione (dimeric 2,4-toluene diisocyanate)0 %31.12.2013
ex2933998064((3R)-1-{(1R,2R)-2-[2-(3,4-Dimethoxyphenyl) ethoxy]cyclohexyl}pyrrolidin-3-ol.hydrochloride, (CAS RN 748810-28-8)0 %31.12.2015
ex2933998065Candesartan cilexetil (INNM)0 %31.12.2013
ex29339980706,7-Dihydro-5H-cyclopenta[b]pyridine (CAS RN 533-37-9)0 %31.12.2013
ex293399807110-methoxyiminostilbene (CAS RN 4698-11-7)0 %31.12.2013
ex29339980721,4,7-Trimethyl-1,4,7-Triazacyclononane0 %31.12.2013
ex29339980735-(acetoacetylamino)benzimidazolone (CAS RN 26576-46-5)0 %31.12.2013
ex2933998074Imidazo[1,2-b] pyridazine-hydrochloride (CAS RN 18087-70-2)0 %31.12.2013
ex2933998076Manganese(2+), bis(octahydro-1,4,7-trimethyl-1H-1,4,7-triazonine-N1,N4,N7)tri-μ-oxodi-, acetate (1:2)0 %31.12.2013
ex2933998077Manganese(2+), bis(octahydro-1,4,7-trimethyl-1H-1,4,7-triazonine-N1,N4,N7)tri-μ-oxodi-, sulphate (1:1)0 %31.12.2013
ex29339980783-Amino-3-azabicyclo (3.3.0) octane hydrochloride (CAS RN 58108-05-7)0 %31.12.2013
ex29339980811,2,3-Benzotriazole (CAS RN 95-14-7)0 %31.12.2016
ex2933998082Tolytriazole (CAS RN 29385-43-1)0 %31.12.2013
ex29339980882,6-Dichloroquinoxaline (CAS RN 18671-97-1)0 %31.12.2013
ex2933998089Carbendazim (ISO) (CAS RN 10605-21-7)0 %31.12.2013
ex2934100010Hexythiazox (ISO) (CAS RN 78587-05-0)0 %31.12.2013
ex29341000202-(4-Methylthiazol-5-yl)ethanol0 %31.12.2013
ex2934100040(Z)-2-(2-tert-butoxycarbonylaminothiazol-4-yl)-2-pentenoic acid (CAS RN 86978-24-7)0 %31.12.2013
ex29341000502-(2-Formylaminothiazol-4-yl)acetic acid (CAS RN 75890-68-5)0 %31.12.2013
ex2934100060Fosthiazate (ISO) (CAS RN 98886-44-3)0 %31.12.2014
ex29341000702-(Formylamino)-4-thiazoleacetyl chloride, hydrochloride (CAS RN 372092-18-7)0 %31.12.2016
ex29341000803,4-Dichloro-5-carboxyisothiazole (CAS RN 18480-53-0)0 %31.12.2016
ex29342080104-Chloro-1,3-benzothiazol-2(3H)-one0 %31.12.2013
ex2934208020S-1,3-Benzothiazol-2-yl (2Z)-(5-amino-1,2,4-thiadiazol-3-yl)(methoxyimino)ethanethioate (CAS RN 89604-91-1)0 %31.12.2016
ex29342080302-[[(Z)-[1-(2-Amino-4-thiazolyl)-2-(2-benzothiazolylthio)-2-oxoethylidene]amino]oxy]-acetic acid, methyl ester (CAS RN 246035-38-1)0 %31.12.2016
ex29342080401,2-Benzisothiazol-3(2H)-one (Benzisothiazolinone (BIT)) (CAS RN 2634-33-5)0 %31.12.2012
ex2934208050S-(1,3-Benzothiazol-2-yl)-(Z)-2-(2-aminothiazol-4-yl)-2-(acetyloxyimino)thioacetate, (CAS RN 104797-47-9)0 %31.12.2013
ex2934208060Benzothiazol-2-yl-(Z)-2-trityloxyimino-2-(2-aminothiazole-4-yl)-thioacetate (CAS RN 143183-03-3)0 %31.12.2015
ex2934208070N,N-Bis(1,3-benzothiazol-2-ylsulphanyl)-2-methylpropan-2-amine (CAS RN 3741-80-8)0 %31.12.2015
ex2934999015Carboxin (ISO) (CAS RN 5234-68-4)0 %31.12.2013
ex2934999017Methyl(1,8-diethyl-1,3,4,9-tetrahydropyrano[3,4-b]indol-1-yl)acetate (CAS RN 122188-02-7)0 %31.12.2016
ex2934999020Thiophene (CAS RN 110-02-1)0 %31.12.2014
ex2934999023Bromuconazole (ISO) with a purity by weight of 96 % or more (CAS RN 116255-48-2)0 %31.12.2016
ex29349990252,4-Diethyl-9H-thioxanthen-9-one (CAS RN 82799-44-8)0 %31.12.2015
ex293499902811-(Piperazin-1-yl)dibenzo[b,f][1,4]thiazepine dihydrochloride (CAS RN 111974-74-4)0 %31.12.2016
ex2934999030Dibenzo[b,f][1,4]thiazepin-11(10H)-one (CAS RN 3159-07-7)0 %31.12.2014
ex2934999033[2,2′-Thio-bis(4-tert-octylphenolato)]-n-butylamine nickel (CAS RN 14516-71-3)0 %31.12.2016
ex2934999035Dimethenamide (ISO)0 %31.12.2013
ex29349990402-Thiophene ethylamine (CAS RN 30433-91-1)0 %31.12.2015
ex2934999045Tris(2,3-epoxypropyl)-1,3,5-triazinanetrione0 %31.12.2013
ex293499905010-[1,1′-Biphenyl]-4-yl-2-(1-methylethyl)-9-oxo-9H-thioxanthenium hexafluorophosphate, (CAS RN 591773-92-1)0 %31.12.2015
ex2934999055Olmesartan medoxomil (INN)0 %31.12.2013
ex2934999060DL-Homocysteine thiolactone hydrochloride (CAS RN 6038-19-3)0 %31.12.2013
ex2934999065Methyl 3-aminothiophene-2-carboxylate (CAS RN 22288-78-4)0 %31.12.2013
ex2934999066Tetrahydrothiophene-1,1-dioxide (CAS RN 126-33-0)0 %31.12.2013
ex29349990721-[3-(5-Nitro-2-furyl)allylideneamino]imidazolidine-2,4-dione (CAS RN 1672-88-4)0 %31.12.2013
ex29349990742-Isopropylthioxanthone (CAS RN 5495-84-1)0 %31.12.2012
ex2934999075(4R-cis)-1,1-Dimethylethyl-6-[2[2-(4-fluorophenyl)-5-(1-isopropyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrol-1-yl]ethyl]-2,2-dimethyl-1,3-dioxane-4-acetate (CAS RN 125971-95-1)0 %31.12.2016
ex29349990762,5-Thiophenediylbis(5-tert-butyl-1,3-benzoxazole) (CAS RN 7128-64-5)0 %31.12.2016
ex3204200010
ex2934999077Potassium 5-methyl-1,3,4-oxadiazole-2-carboxylate0 %31.12.2016
ex29349990781,2,4-Thiadiazole-3-acetic acid 5-[(ethoxycarbonyl)amino]- methyl ester (CAS RN 150215-07-9)0 %31.12.2012
ex2934999079Thiophen-2-ethanol (CAS RN 5402-55-1)0 %31.12.2013
ex29349990812-(5-Amino-1,2,4-thiadiazol-3-yl)-(Z)-2-methoxyiminoacetic acid (CAS RN 72217-12-0)0 %31.12.2013
ex29349990822-Methyl-1-[4-(methylthio)phenyl]-2-morpholinopropan-1-one (CAS RN 71868-10-5)0 %31.12.2013
ex2934999083Flumioxazin (ISO) of a purity by weight of 96 % or more (CAS RN 103361-09-7)0 %31.12.2014
ex2934999084Etoxazole (ISO) of a purity by weight of 94,8 % or more (CAS RN 153233-91-1)0 %31.12.2014
ex2934999085N2-[1-(S)-Ethoxycarbonyl-3-phenylpropyl]-N6-trifluoroacetyl-L-lysyl-N2-carboxy anhydride, (CAS RN 126586-91-2)0 %31.12.2015
ex2934999086Dithianon (ISO) (CAS RN 3347-22-6)0 %31.12.2015
ex29349990872,2′-(1,4-Phenylene)bis(4H-3,1-benzoxazin-4-one) (CAS RN 18600-59-4)0 %31.12.2015
ex2935009015Flupyrsulfuron-methyl-sodium (ISO) (CAS RN 144740-54-5)0 %31.12.2013
ex2935009020Toluenesulphonamides0 %31.12.2013
ex2935009023N-[4-(2-Chloroacetyl)phenyl]methanesulphonamide (CAS RN 64488-52-4)0 %31.12.2016
ex2935009025Triflusulfuron-methyl (ISO) (CAS RN 126535-15-7)0 %31.12.2013
ex2935009027Methyl (3R,5S,6E)-7-{4-(4-fluorophenyl)-6-isopropyl-2-[methyl(methylsulfonyl)amino]pyrimidin-5-yl}-3,5-dihydroxyhept-6-enoate (CAS RN 147118-40-9)0 %31.12.2016
ex2935009030Mixture of isomers consisting of N-ethyltoluene-2-sulphonamide and N-ethyltoluene-4-sulphonamide0 %31.12.2014
ex2935009035Chlorsulfuron (ISO) (CAS RN 64902-72-3)0 %31.12.2013
ex2935009040Imazosulfuron (ISO), of a purity by weight of 98 % or more (CAS RN 122548-33-8)0 %31.12.2015
ex2935009042Penoxsulam (ISO) (CAS RN 219714-96-2)0 %31.12.2015
ex2935009045Rimsulfuron (ISO) (CAS RN 122931-48-0)0 %31.12.2013
ex29350090504,4′-Oxydi(benzenesulphonohydrazide)0 %31.12.2013
ex29350090532,4-Dichloro-5-sulphamoylbenzoic acid (CAS RN 2736-23-4)0 %31.12.2014
ex2935009055Thifensulfuron-methyl (ISO) (CAS RN 79277-27-3)0 %31.12.2013
ex2935009063Nicosulphuron (ISO), of a purity by weight of 91 % or more (CAS RN 111991-09-4)0 %31.12.2014
ex2935009065Tribenuron-methyl (ISO) (CAS RN 101200-48-0)0 %31.12.2013
ex2935009075Metsulfuron-methyl (ISO) (CAS RN 74223-64-6)0 %31.12.2013
ex2935009077[[4-[2-[[(3-Ethyl-2,5-dihydro-4-methyl-2-oxo-1H-pyrrol-1-yl)carbonyl]amino] ethyl]phenyl]sulfonyl]-carbamic acid ethyl ester, (CAS RN 318515-70-7)0 %31.12.2014
ex29350090814-Amino-N-(4-aminophenyl)benzenesulphonamide (CAS RN 16803-97-7)0 %31.12.2013
ex2935009082N-(5,7-Dimethoxy[1,2,4]triazolo[1,5-a]pyrimidin-2-yl)-2-methoxy-4-(trifluoromethyl)pyridine-3-sulphonamide, (CAS RN 422556-08-9)0 %31.12.2013
ex29350090833-Amino-N,N-diethyl-4-methoxybenzenesulphonamide (CAS RN 97-35-8)0 %31.12.2013
ex2935009085N-[4-(Isopropylaminoacetyl)phenyl]methanesulphonamide hydrochloride0 %31.12.2013
ex29350090864-(m-Tolylamino)pyridine-3-sulphonamide0 %31.12.2013
ex2935009088N-(2-(4-Amino-N-ethyl-m-toluidino)ethyl)methanesulphonamide sesquisulphate monohydrate, (CAS RN 25646-71-3)0 %31.12.2013
ex29350090893-(3-Bromo-6-fluoro-2-methylindol-1-ylsulphonyl)-N,N-dimethyl-1,2,4-triazol-1-sulphonamide (CAS RN 348635-87-0)0 %31.12.2016
ex2938903010Ammonium glycyrrhizate (CAS RN 53956-04-0)0 %31.12.2015
ex2938909010Hesperidin (CAS RN 520-26-3)0 %31.12.2013
ex2941203010Dihydrostreptomycin sulphate (CAS RN 5490-27-7)0 %31.12.2016
32012000Wattle extract0 %31.12.2013
ex3201909020Tanning extracts derived from gambier and myrobalan fruits0 %31.12.2013
ex3204110010Dye C.I. Disperse Yellow 54 also known as C.I. Solvent Yellow 1140 %31.12.2015
ex3204110020Dye C.I. Disperse Yellow 2410 %31.12.2015
ex3204110030Preparation of dispersion dyes, containing:C.I. Disperse Orange 61,C.I. Disperse Blue 291:1,C.I. Disperse Violet 93:1,C.I. Disperse Red 540 %31.12.2015
ex3204110040Dye C.I. Disperse Red 600 %31.12.2016
ex3204110050Dye C.I. Disperse Blue 720 %31.12.2016
ex3204110060Dye C.I. Disperse Blue 3590 %31.12.2016
ex3204130010Dye C.I. Basic Red 10 %31.12.2016
ex3204150010Dye C.I. Vat Orange 7 (C.I. Pigment Orange 43)0 %31.12.2012
ex3204150060Dyestuff C.I. Vat Blue 40 %31.12.2013
ex3204170010Dye C.I. Pigment Yellow 810 %31.12.2013
ex3204170030Dye C.I. Pigment Yellow 970 %31.12.2012
ex3204170040Dye C.I. Pigment Yellow 1200 %31.12.2014
ex3204170050Dye C.I. Pigment Yellow 1800 %31.12.2014
ex3204170055Dye C.I. Pigment Red 1690 %31.12.2016
ex3204170060Dye C.I. Pigment Red 53:10 %31.12.2016
ex3204170065Dye C.I. Pigment Red 530 %31.12.2016
ex3204170070Dye C.I. Pigment Yellow 130 %31.12.2016
ex3204170075Dye C.I. Pigment Red 20 %31.12.2016
ex3204190011Photochromic dye, 3-(4-butoxyphenyl-6,7-dimethoxy-3-(4-methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromene-11-carbonitrile0 %31.12.2014
ex32041900154-{4-[3-(4-Methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo [h]indeno[2,1-f]chromen-3-yl]phenyl}morpholine0 %31.12.2013
ex3204190021Photochromic dye, 4-(3-(4-butoxyphenyl)-6-methoxy-3-(4-methoxyphenyl)-13,13-dimethyl-11-(trifluoromethyl)-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-7-yl)morpholine0 %31.12.2014
ex3204190025Cyclohexyl 8-methyl-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate0 %31.12.2013
ex3204190031Photochromic dye, N-hexyl -6,7-dimethoxy-3,3-bis(4-methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromene-11-carboxamide0 %31.12.2014
ex3204190041Photochromic dye, 4,4′-(13,13-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromene-3,3-diyl)diphenol0 %31.12.2014
ex3204190051Photochromic dye, 4-(4-(6,11-difluoro-13,13-dimethyl-3-phenyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-3-yl)phenyl)morpholine0 %31.12.2014
ex3204190061Photochromic dye, 3-(4-butoxyphenyl)-6,7-dimethoxy-3-(4-methoxyphenyl)-13,13-dimethyl-11-(trifluoromethyl)-3,13-dihydrobenzo[h]indeno[2,1-f]chromene0 %31.12.2014
ex32041900656-Methoxy-7-morpholino-13-ethyl-13-methoxy-3,3-bis-(4-methoxyphenyl)-3,13-dihydrobenzo[h]indeno[2,1-f]chromene0 %31.12.2013
ex3204190070Dye C.I. Solvent Red 490 %31.12.2013
ex3204190071Dye C.I. Solvent Brown 530 %31.12.2015
ex3204190072Dye C.I. Solvent Yellow 930 %31.12.2015
ex3204190073Dye C.I. Solvent Blue 1040 %31.12.2015
ex32041900756,7-Dimethoxy-13-ethyl-13-methoxy-3,3-bis-(4-methoxyphenyl)-3,13-dihydrobenzo[h]indeno[2,1-f]chromene0 %31.12.2013
ex3204190077Dye C.I. Solvent Yellow 980 %31.12.2016
ex3204190080((R) and (S) isomers of 6,7-Dimethoxy-13-ethyl-13-[2-(2-methoxyethoxy)-ethoxy]-3-(4-methoxyphenyl)-3-(4-fluorophenyl)-3,13-dihydrobenzo[h]indeno[2,1-f]chromene0 %31.12.2013
ex32041900816,11-Difluoro-3,3-di-(4-methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromene0 %31.12.2013
ex32041900823-(4-Fluorophenyl)-3-(4-piperidinophenyl)-13,13-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromene0 %31.12.2013
ex32041900836,7-Dimethoxy-11-cyano-3,3-di-(4-methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromene0 %31.12.2013
ex3205000010Aluminium lakes prepared from dyes for use in the manufacture of pigments for the pharmaceutical industry0 %31.12.2013
ex3206110010Titanium dioxide coated with isopropoxytitanium triisostearate, containing by weight 1,5 % or more but not more than 2,5 % of isopropoxytitanium triisostearate0 %31.12.2013
ex3206110020Rutile titanium dioxide, containing by weight:90 % or more of titanium dioxide,not more than 4 % of aluminium hydroxide,not more than 6 % of silicon dioxide0 %31.12.2016
ex3206420010Lithopone0 %31.12.2013
32065000Inorganic products of a kind used as luminophores0 %31.12.2013
ex3207300010Preparation containing:not more than 85 % by weight of silver,not less than 2 % by weight of palladium,barium titanate,terpineol, andethyl cellulose,used for screen printing in the manufacture of multilayer ceramic capacitors0 %31.12.2013
ex3207408520Glass flakes coated with silver, of an average diameter of 40 (± 10) μm0 %31.12.2013
ex3207408530Glass frit, for use in the manufacture of cathode-ray tubes0 %31.12.2013
ex3208109010Anti-reflection coating, consisting of an ester based polymer modified with a chromophore group, in the form of a solution of either 2-methoxy-1-propanol, 2-methoxy-1-methylethyl acetate or methyl-2-hydroxyisobutyrate, containing by weight not more than 10 % of polymer0 %31.12.2013
ex3707909060
ex3208201010Copolymer of N-vinylcaprolactam, N-vinyl-2-pyrrolidone and dimethylaminoethyl methacrylate, in the form of a solution in ethanol containing by weight 34 % or more but not more than 40 % of copolymer0 %31.12.2013
ex3208201020Immersion topcoat solution containing by weight 0,5 % or more but not more than 15 % of acrylate-methacrylate-alkenesulphonate copolymers with fluorinated side chains, in a solution of n-butanol and/or 4-methyl-2-pentanol and/or diisoamylether0 %31.12.2013
ex3208901910Copolymer of maleic acid and methyl vinyl ether, monoesterified with ethyl and/or isopropyl and/or butyl groups, in the form of a solution in ethanol, ethanol and butanol, isopropanol or isopropanol and butanol0 %31.12.2013
ex3208901915Modified, chlorinated polyolefins, whether or not in a solution or dispersion0 %31.12.2013
ex3902909094
ex3208901940Polymer of methylsiloxane, in the form of a solution in a mixture of acetone, butanol, ethanol and isopropanol, containing by weight 5 % or more but not more than 11 % of polymer of methylsiloxane0 %31.12.2013
ex3208901950Solution containing by weight:(65 ± 10) % of γ-butyrolactone,(30 ± 10) % of polyamide resin,(3,5 ± 1,5) % of naphthoquinone ester derivative, and(1,5 ± 0,5) % of arylsilicic acid0 %31.12.2013
ex3208901960Copolymer of hydroxystyrene with one or more of the following:styrene,alkoxystyrene,alkylacrylates,dissolved in ethyl lactate0 %31.12.2016
ex3208901975Acenaphthalene copolymer in ethyl lactate solution0 %31.12.2012
ex3208901985Mixture containing by weight:30-45 % polyamide resin,2-10 % diazonaphthoquinone,50-65 % γ-butyrolactone0 %31.12.2013
ex3208909110Preparation on the basis of polyhydroxyamide containing at least naphthoquinone ester derivate or tosylate dissolved in γ-butyrolactone and/or 2-methoxy-1-methylethyl acetate0 %31.12.2012
ex3208909910Solution based on chemically modified natural polymers, containing two or more of the following dyes:methyl 8′-acetoxy-1,3,3,5,6-pentamethyl-2,3-dihydrospiro[1H-indole-2,3′-naphtho[2,1-b][1,4]oxazine]-9′-carboxylate,methyl 6-(isobutyryloxy)-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate,13-isopropyl-3,3-bis(4-methoxyphenyl)-6,11-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-13-ol,ethoxycarbonylmethyl 8-methyl-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate,13-ethyl-3-[4-(morpholino)phenyl]-3-phenyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-13-ol0 %31.12.2013
ex3208909920Solution based on chemically modified natural polymers, containing two or more of the following dyes:4-[4-(13,13-dimethyl-3-phenyl-3,13-dihydrobenzo [h]indeno[2,1-f]chromen-3-yl)phenyl]morpholine,4-{4-[3-(4-methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo [h]indeno[2,1-f]chromen-3-yl]phenyl}morpholine,cyclohexyl 8-methyl-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate,ethoxycarbonylmethyl 6-acetoxy-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate,2-pentyl-7,7-diphenylbenzo[h]chromeno[6,5-d]-1,3-dioxin-4(7H)-one,13-butyl-13-ethoxy-6,11-dimethoxy-3,3-bis(4-methoxyphenyl)-3,13-dihydrobenzo [h]indeno[2,1-f]chromene,3-(4-methoxyphenyl)-13,13-dimethyl-3-phenyl-3,13-dihydrobenzo [h]indeno[2,1-f]chromene,6,7-dimethoxy-3,3-bis(4-methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo [h]indeno[2,1-f]chromene0 %31.12.2013
ex3215110010Printing ink, liquid, consisting of a dispersion of a vinyl acrylate copolymer and colour pigments in isoparaffins, containing by weight not more than 13 % of vinyl acrylate copolymer and colour pigments0 %31.12.2013
ex3215190010
ex3215900010Ink formulation, for use in the manufacture of ink-jet cartridges0 %31.12.2013
ex3215900020Heat sensitive ink fixed on a plastic film0 %31.12.2013
ex3215900030Disposable cartridge ink, containing by weight:5 % or more, but not more than 10 % of amorphous silicon dioxide, or3,8 % or more of dye C.I. Solvent Black 7 in organic solvents,for use in the marking of integrated circuits0 %31.12.2013
ex3215900040Dry ink powder with a base of hybrid resin (made from polystyrene acrylic resin and polyester resin) mixed with:wax,a vinyl-based polymer, anda colouring agentfor use in the manufacture of toner bottles for photocopiers, fax machines, printers and multifunction devices0 %31.12.2015
33011210Essential oil of orange, not deterpenated0 %31.12.2013
ex3402119010Sodium lauroyl methyl isethionate0 %31.12.2015
ex3402130010Vinyl copolymer surface active agent based on polypropylene glycol0 %31.12.2013
ex3402130020Surfactant containing 1,4-dimethyl-1,4-bis(2-methylpropyl)-2-butyne-1,4-diyl ether, polymerised with oxirane, methyl terminated0 %31.12.2012
ex3402901020Mixture of docusate sodium (INN) and sodium benzoate0 %31.12.2013
ex3402901030Surface-active preparation, consisting of a mixture of sodium docusate and ethoxylated 2,4,7,9-tetramethyldec-5-yne-4,7-diol0 %31.12.2015
ex3402901040Amphoteric fluorinated surfactant in a mixture of water and ethanol, containing by weight 25 % or more but not more than 30 % surfactant0 %31.12.2013
ex3402901050Surface-active preparation, consisting of a mixture of polysiloxane and poly(ethylene glycol)0 %31.12.2015
ex3402901060Surface-active preparation, containing 2-ethylhexyloxymethyl oxirane0 %31.12.2014
ex3402901070Surface-active preparation, containing ethoxylated 2,4,7,9-tetramethyl-5-decyne-4,7-diol0 %31.12.2014
ex3403990010Cutting-fluid preparation based on an aqueous solution of synthetic polypeptides0 %31.12.2013
ex3504009010Avidin (CAS RN 1405-69-2)0 %31.12.2014
ex3505105020O-(2-Hydroxyethyl)-derivative of hydrolysed maize starch0 %31.12.2013
ex3506910010Adhesive based on an aqueous dispersion of a mixture of dimerised rosin and a copolymer of ethylene and vinyl acetate (EVA)0 %31.12.2013
ex3506910030Two component microencapsulated epoxy adhesive dispersed in a solvent0 %31.12.2013
ex3506910040Acrylic pressure sensitive adhesive with a thickness of 0,076 mm or more but not more than 0,127 mm, put up in rolls of a width of 45,7 cm or more but not more than 132 cm supplied on a release liner with an initial peel adhesion release value of not less than 15 N/25 mm (measured according to ASTM D3330)0 %31.12.2014
ex3601000010Pyrotechnical powder in the form of granulate of cylindrical shape, composed of strontium nitrate or copper nitrate in the solution of nitroguanidine, binder and additives, used as a component of airbag inflators0 %31.12.2016
ex3701300010Relief printing plate, of a kind used for printing on newsprint, consisting of a metal substrate coated with a photopolymer layer of a thickness of 0,2 mm or more but not more than 0,8 mm, not covered with a release film, of a total thickness of not more than 1 mm0 %31.12.2013
ex3701300020Photosensitive plate consisting of a photopolymer layer on a polyester foil of a total thickness of more than 0,43 mm but not more than 3,18 mm0 %31.12.2014
ex3701990010Plate of quartz or of glass, covered with a film of chromium and coated with a photosensitive or electron-sensitive resin, for the manufacture of masks for the goods of heading 8541 or 85420 %31.12.2013
ex3705909010Photomasks for photographically transferring circuit diagram patterns onto semiconductor wafers0 %31.12.2014
ex3707100010Photosensitive emulsion for the sensitisation of silicon discs0 %31.12.2013
ex3707100015Sensitising emulsion consisting of:by weight not more than 12 % of diazooxonapthtalenesulphonic acid ester,phenolic resins,in a solution containing at least 2-methoxy-1-methylethyl acetate or ethyl lactate or methyl 3-methoxypropionate or 2-heptanone0 %31.12.2013
ex3707100025Sensitising emulsion containing:phenolic or acrylic resins,a maximum 2 % by weight of light sensitive acid precursor,in a solution containing 2-methoxy-1-methylethyl acetate or ethyl lactate0 %31.12.2013
ex3707100030Preparation based on photosensitive acrylic containing polymer, containing colour pigments, 2-methoxy-1-methylethylacetate and cyclohexanone and whether or not containing ethyl-3-ethoxypropionate0 %31.12.2013
ex3707100035Sensitising emulsion or preparation containing one or more of:acrylate polymers,methacrylate polymers,derivatives of styrene polymers,containing by weight not more than 7 % of photosensitive acid precursors, dissolved in an organic solvent containing at least 2-methoxy-1-methylethyl acetate0 %31.12.2016
ex3707909070
ex3707100040Sensitising emulsion, containing:not more than 10 % by weight of naphthoquinonediazide esters,2 % or more but not more than 20 % by weight of copolymers of hydroxystyrene,not more than 7 % by weight of epoxy-containing derivatives,dissolved in 1-ethoxy-2-propyl acetate and/or ethyl lactate0 %31.12.2016
ex3707100045Photosensitive emulsion consisting of cyclised polyisoprene containing:55 % or more but not more than 75 % by weight of xylene and12 % or more but not more than 18 % by weight of ethylbenzene0 %31.12.2014
ex3707100050Photosensitive emulsion containing by weight:20 % or more but not more than 45 % of copolymers of acrylates and/or methacrylates and hydroxystyrene derivatives,25 % or more but not more than 50 % of organic solvent containing at least ethyl lactate and/or propylene glycolmethylether acetate,5 % or more but not more than 30 % of acrylates,not more than 12 % of a photoinitiator0 %31.12.2014
ex3707902010Dry ink powder or toner blend, consisting of a copolymer of styrene and butyl acrylate and either magnetite or carbon black, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers0 %31.12.2013
ex3707902020Dry ink powder or toner blend, based on a polyol resin, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers0 %31.12.2013
ex3707902040Dry ink powder or toner blend, based on a polyester resin, manufactured by a polymerisation process, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers0 %31.12.2013
ex3707909010Anti-reflection coating, consisting of a modified methacrylic polymer, containing by weight not more than 10 % of polymer, in the form of a solution in 2-methoxy-1-methylethyl acetate and 1-methoxypropan-2-ol0 %31.12.2013
ex3707909030Anti-reflection coating, in the form of an aqueous solution, containing by weight:not more than 2 % of perhalogenated sulphonic acid derivatives,not more than 1 % of a vinyl polymer0 %31.12.2013
ex3824909791
ex3707909040Anti reflection coating, in the form of an aqueous solution, containing by weight not more than:2 % of halogen-free alkyl sulphonic acid, and5 % of a fluorinated polymer0 %31.12.2014
ex3707909080Anti-reflection coating, consisting of either a siloxane polymer or an organic polymer having a phenolic hydroxy group modified with a chromophore group, in the form of a solution of an organic solvent containing either 1-ethoxy-2-propanol or 2-methoxy-1-methylethyl acetate containing by weight not more than 10 % of polymer0 %31.12.2015
ex3707909085Rolls, containing:a dry layer of a photosensitive acrylic resin,on one side a poly(ethylene terephthalate) protecting foil, andon the other side a polyethylene protecting foil0 %31.12.2014
ex3801209010Colloidal graphite in suspension in water, for use as internal coating in colour cathode-ray tubes0 %31.12.2013
38059010Pine oil1,7 %31.12.2013
ex3806100020Rosin modified phenolic resin,containing 60 % or more but not more than 75 % by weight of rosin,with an acid value of not more than 25,of a kind used in offset printing0 %31.12.2016
ex3808919010Indoxacarb (ISO) and its (R) isomer, fixed on a support of silicon dioxide0 %31.12.2013
ex3808919030Preparation containing endospores or spores and protein crystals derived from either:Bacillus thuringiensis Berliner subsp. aizawai, and kurstaki orBacillus thuringiensis subsp. kurstaki, orBacillus thuringiensis subsp. israelensis, orBacillus thuringiensis subsp. aizawai, orBacillus thuringiensis subsp. tenebrionis0 %31.12.2014
ex3808919040Spinosad (ISO)0 %31.12.2013
ex3808919050Spodoptera exigua nuclear polyhedrosis virus (SeNPV) in an aqueous glycerol suspension0 %31.12.2013
ex3808929010Fungicide in the form of a powder, containing by weight 65 % or more but not more than 75 % of hymexazole (ISO), not put up for retail sale0 %31.12.2013
ex3808929030Preparation consisting of a suspension of pyrithione zinc (INN) in water, containing by weight:24 % or more but not more than 26 % of pyrithione zinc (INN), or39 % or more but not more than 41 % of pyrithione zinc (INN)0 %31.12.2013
ex3808929050Preparations based on copper pyrithione0 %31.12.2014
ex3808931510Preparation based on a concentrate containing by weight 45 % or more but not more than 55 % of the active herbicidal ingredient Penoxsulam as an aqueous suspension0 %31.12.2012
ex3808932310Herbicide containing flazasulfuron (ISO) as an active ingredient0 %31.12.2014
ex3808932720Organic solution of Clethodim (ISO), with a Clethodim content of 37 % (± 2 %) or 70 % (± 2 %) by weight0 %31.12.2012
ex3808932740Preparation, consisting of a suspension of tepraloxydim (ISO), containing by weight:30 % or more of tepraloxydim (ISO), andnot more than 70 % of a petroleum fraction consisting of aromatic hydrocarbons0 %31.12.2016
ex3808939010Preparation, in the form of granules, containing by weight:38,8 % or more but not more than 41,2 % of Gibberellin A3, or9,5 % or more but not more than 10,5 % of Gibberellin A4 and A70 %31.12.2014
ex3808939020Preparation consisting of benzyl(purin-6-yl)amine in a glycol solution, containing by weight:1,88 % or more but not more than 2,00 % of benzyl(purin-6-yl)amine,of a kind used in plant growth regulators0 %31.12.2015
ex3808939030Aqueous solution containing by weight:1,8 % of sodium para-nitrophenolate,1,2 % of sodium ortho-nitrophenolate,0,6 % of sodium 5-nitroguaiacolate,for use in the manufacture of a plant growth regulator0 %31.12.2015
ex3808939040Mixed white powder containing by weight:3 % or more but not more than 3,6 % of 1-methylcyclopropene with a purity more than 96 %, andcontaining less than 0,05 % of each impurity of 1-chloro-2-methylpropene, and 3-chloro-2-methylpropene,for use in the manufacture of a growth regulator of post-harvest fruits, vegetables and ornamentals with a specific generator0 %31.12.2015
ex3808939050Preparation in the form of powder, containing by weight:55 % or more of Gibberellin A4,1 % or more but not more than 35 % of Gibberellin A7,90 % or more of Gibberellin A4 and Gibberellin A7 combined,not more than 10 % of a combination of water and other naturally occurring Gibberellins,of a kind used in plant growth regulators0 %31.12.2015
ex3808999010Oxamyl (ISO) in a solution of cyclohexanone and water0 %31.12.2015
ex3809910010Mixture of 5-ethyl-2-methyl-2-oxo-1,3,2λ5-dioxaphosphoran-5-ylmethyl methyl methylphosphonate and bis(5-ethyl-2-methyl-2-oxo-1,3,2λ5-dioxaphosphoran-5-ylmethyl) methylphosphonate0 %31.12.2013
ex3809920010Paper anti-fading agent, consisting of a mixture of magnesium trisilicate and monosodium salt of 2,2′-methylenebis(4,6-di-tert-butylphenyl) phosphate0 %31.12.2013
ex3809920020Defoamer, consisting of a mixture of oxydipropanol and 2,5,8,11-tetramethyldodec-6-yn-5,8-diol0 %31.12.2014
ex3810100010Soldering paste, consisting of a mixture of metals and resin containing by weight:70 % or more, but not more than 90 % of tin,not more than 10 % of one or more metals of silver, copper, bismuth, zinc, or indium,for use in the electro technical industry0 %31.12.2013
ex3811190010Solution of more than 61 % but not more than 63 % by weight of methylcyclopentadienyl manganese tricarbonyl in an aromatic hydrocarbon solvent, containing by weight not more than:4,9 % of 1,2,4-trimethyl-benzene,4,9 % of naphthalene, and0,5 % of 1,3,5-trimethyl-benzene0 %31.12.2013
ex3811210010Salts of dinonylnaphthalenesulphonic acid, in the form of a solution in mineral oils0 %31.12.2013
ex3811210020Additives for lubricating oils, based on complex organic molybdenum compounds, in the form of a solution in mineral oil0 %31.12.2013
ex3811900010Dinonylnaphthylsulphonic acid salt, in a mineral oil solution0 %31.12.2013
ex3812100010Rubber accelerator based on diphenyl guanidine granules0 %31.12.2016
ex3812308020Mixture containing predominantly bis(2,2,6,6-tetramethyl-1-octyloxy-4-piperidyl) sebacate0 %31.12.2013
ex3812308030Compound stabilisers containing by weight 15 % or more but not more than 40 % of sodium perchlorate and not more than 70 % of 2-(2-methoxyethoxy)ethanol0 %31.12.2013
ex3812308040Mixture of:80 % (± 10 %) by weight of 2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate, and20 % (± 10 %) by weight of 2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate0 %31.12.2013
ex3812308050Preparation consisting of poly-{[6-[(1,1,3,3-tetramethylbutyl)-imino]-1,3,5-triazine-2,4-diyl][2-(2,2,6,6-tetramethylpiperidyl)-amino]-hexamethylene-[4-(2,2,6,6-tetramethylpiperidyl)-imino]} (CAS RN 71878-19-8) with an average chain length of less than 5 monomer units, and poly-(N-hydroxyethyl-2,2,6,6-tetramethyl-4-hydroxy-piperidyl succinate) (CAS RN 65447-77-0)0 %31.12.2016
ex3814009020Mixture containing by weight:69 % or more but not more than 71 % of 1-methoxypropan-2-ol,29 % or more but not more than 31 % of 2-methoxy-1-methylethyl acetate0 %31.12.2013
ex3814009040Azeotrope mixtures containing isomers of nonafluorobutyl methyl ether and/or nonafluorobutyl ethyl ether0 %31.12.2013
ex3815120010Catalyst, in the form of granules or rings of a diameter of 3 mm or more but not more than 10 mm, consisting of silver on an aluminium oxide support and containing by weight 8 % or more but not more than 40 % of silver0 %31.12.2013
ex3815120020Carbon supported platinum catalyst powder, containing by weight 9,5 % or more but not more than 10,5 % of platinum, for use as a fuel cell catalyst0 %31.12.2015
ex3815120030Carbon supported platinum alloy catalyst, containing by weight 11 % or more but not more than 12,6 % of platinum, for use as a fuel cell catalyst0 %31.12.2015
ex3815199010Catalyst, consisting of chromium trioxide or dichromium trioxide fixed on a support of silicon dioxide, of a pore volume, as determined by the nitrogen absorption method, of 2 cm3/g or more0 %31.12.2013
ex3815199015Catalyst, in the form of a powder, consisting of a mixture of metal oxides fixed on a support of silicon dioxide, containing by weight 20 % or more but not more than 40 % of molybdenum, bismuth and iron evaluated together, for use in the manufacture of acrylonitrile0 %31.12.2013
ex3815199030Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polypropylene0 %31.12.2013
ex3815199040Catalyst, in the form of spheres of a diameter of 4,2 mm or more but not more than 9 mm, consisting of a mixture of metals oxides containing predominantly oxides of molybdenum, vanadium and copper, on a support of silicon dioxide and/or aluminium oxide, for use in the manufacture of acrylic acid0 %31.12.2013
ex3815199041Catalysts in the form of tablets, consisting of 60 % (± 2 %) by weight of copper oxide on a support of aluminium oxide0 %31.12.2012
ex3815199050Catalyst consisting of organo-metallic compounds of titanium, magnesium and aluminium on a support of silicon dioxide, in the form of a suspension in tetrahydrofuran0 %31.12.2013
ex3815199060Catalyst consisting of dichromium trioxide, fixed on a support of aluminium oxide0 %31.12.2013
ex3815199065Catalyst consisting of phosphoric acid chemically bonded to a support of silicon dioxide0 %31.12.2013
ex3815199070Catalyst consisting of organo-metallic compounds of aluminium and zirconium, fixed on a support of silicon dioxide0 %31.12.2013
ex3815199075Catalyst consisting of organo-metallic compounds of aluminium and chromium, fixed on a support of silicon dioxide0 %31.12.2013
ex3815199080Catalyst consisting of organo-metallic compounds of magnesium and titanium, fixed on a support of silicon dioxide, in the form of a suspension in mineral oil0 %31.12.2013
ex3815199085Catalyst consisting of organo-metallic compounds of aluminium, magnesium and titanium, fixed on a support of silicon dioxide, in the form of powder0 %31.12.2013
ex3815199086Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polyolefins0 %31.12.2013
ex3815909016Initiator based on dimethylaminopropyl urea0 %31.12.2012
ex3815909020Catalyst, in powder form, consisting of a mixture of titanium trichloride and aluminium chloride, containing by weight:20 % or more but not more than 30 % of titanium, and55 % or more but not more than 72 % of chlorine0 %31.12.2013
ex3815909030Catalyst, consisting of a suspension in mineral oil of:tetrahydrofuran complexes of magnesium chloride and titanium(III) chloride, andsilicon dioxide,containing 6,6 % (± 0,6 %) by weight of magnesium, andcontaining 2,3 % (± 0,2 %) by weight of titanium0 %31.12.2015
ex3815909050Catalyst containing titanium trichloride, in the form of a suspension in hexane or heptane containing by weight, in the hexane- or heptane-free material, 9 % or more but not more than 30 % of titanium0 %31.12.2013
ex3815909070Catalyst, consisting of a mixture of (2-hydroxypropyl)trimethylammonium formate and dipropylene glycols0 %31.12.2013
ex3815909071Catalyst, containing N-(2-hydroxypropylammonium)diazabicyclo (2,2,2) octane-2-ethyl hexanoate, dissolved in ethane-1,2-diol0 %31.12.2016
ex3815909077Catalyst powder in an aqueous suspension containing by weight:1 % or more but not more than 3 % of palladium,0,25 % or more but not more than 3 % of lead,0,25 % or more but not more than 0,5 % of lead hydroxide,5,5 % or more but not more than 10 % of aluminium,4 % or more but not more than 10 % of magnesium,30 % or more but not more than 50 % of silicon dioxide0 %31.12.2013
ex3815909080Catalyst consisting predominantly of dinonylnaphthalenedisulphonic acid in the form of a solution in isobutanol0 %31.12.2013
ex3815909081Catalyst, containing by weight 69 % or more but not more than 79 % of (2-hydroxy-1-methylethyl)trimethylammonium 2-ethylhexanoate0 %31.12.2013
ex3815909084Powder catalyst containing by weight a minimum 96 % of oxides of copper, chromium and iron0 %31.12.2013
ex3815909085Catalyst based on aluminosilicate (zeolite), for the alkylation of aromatic hydrocarbons, for the transalkylation of alkylaromatic hydrocarbons or for the oligomerisation of olefins0 %31.12.2012
ex3815909086Catalyst, in the form of rodlets, consisting of an aluminosilicate (zeolite), containing by weight 2 % or more but not more than 3 % of rare-earth metal oxides and less than 1 % of disodium oxide0 %31.12.2013
ex3815909087Reaction initiator, consisting of diisopropyl peroxydicarbonate, in the form of a solution in diallyl 2,2′-oxydiethyl dicarbonate0 %31.12.2013
ex3815909088Catalyst, consisting of titanium tetrachloride and magnesium chloride, containing by weight on an oil- and hexane-free basis:4 % or more but not more than 10 % of titanium, and10 % or more but not more than 20 % magnesium0 %31.12.2013
ex3815909089Rhodococcus rhodocrous J1 bacteria, containing enzymes, suspended in a polyacrylamide gel or in water, for use as a catalyst in the production of acrylamide by the hydration of acrylonitrile0 %31.12.2016
ex3817005010Mixture of alkylbenzenes (C14-26) containing by weight:35 % or more but not more than 60 % of eicosylbenzene,25 % or more but not more than 50 % of docosylbenzene,5 % or more but not more than 25 % of tetracosylbenzene0 %31.12.2013
ex3817008010Mixture of alkylnaphthalenes, containing by weight:88 % or more but not more than 98 % of hexadecylnaphthalene,2 % or more but not more than 12 % of dihexadecylnaphthalene0 %31.12.2013
ex3817008020Mixture of branched alkyl benzenes mainly containing dodecyl benzenes0 %31.12.2013
ex3819000020Fire resistant hydraulic fluid based on phosphate ester0 %31.12.2013
ex3824901510Acid aluminosilicate (artificial zeolite of the Y type) in the sodium form, containing by weight not more than 11 % of sodium evaluated as sodium oxide, in the form of rodlets0 %31.12.2013
ex3824909705Mixture of methylmethacrylate monomer and butylacrylate monomer in a solution of xylene and butylacetate, containing by weight more than 54 % but not more than 56 % of solvents0 %31.12.2014
ex3824909706Paraffin with a level of chlorination of 70 % or more0 %31.12.2014
ex3824909707Film containing oxides of barium or calcium combined with either oxides of titanium or zirconium, in an acrylic binding material0 %31.12.2014
ex3824909708Mixture of divinylbenzene-isomers and ethylvinylbenzene-isomers, containing by weight 56 % or more but not more than 80 % of divinylbenzene0 %31.12.2014
ex3824909709Anti-corrosion preparations consisting of salts of dinonylnaphthalenesulphonic acid, either:on a support of mineral wax, whether or not modified chemically, orin the form of a solution in an organic solvent0 %31.12.2013
ex3824909710Calcined bauxite (refractory grade)0 %31.12.2013
ex3824909711Mixture of phytosterols, not in powder form, containing by weight:40 % or more, but not more than 58 % of beta-sitosterols,20 % or more, but not more than 28 % of campesterols,14 % or more, but not more than 23 % of stigmasterols,0 % or more, but not more than 15 % of other sterols0 %31.12.2014
ex3824909712Oligomer of tetrafluoroethylene, having one iodoethyl end-group0 %31.12.2013
ex3824909713Preparations containing not less than 92 % but not more than 96,5 % by weight of 1,3:2,4-bis-O-(4-methylbenzylidene)-D-glucitol and also containing carboxylic acid derivatives and an alkyl sulphate0 %31.12.2016
ex3824909714Calcium phosphonate phenate, dissolved in mineral oil0 %31.12.2016
ex3824909715Structured silica alumina phosphate0 %31.12.2013
ex3824909716Mixture of bis{4-(3-(3-phenoxycarbonylamino)tolyl)ureido}phenylsulphone, diphenyltoluene-2,4-dicarbamate and 1-[4-(4-aminobenzenesulphonyl)-phenyl]-3-(3-phenoxycarbonylamino-tolyl)-urea0 %31.12.2013
ex3824909717Mixture of acetates of 3-butylene-1,2-diol with a content by weight of 65 % or more but not more than 90 %0 %31.12.2013
ex3824909720Preparation consisting by weight of 83 % or more of 3a,4,7,7a-tetrahydro-4,7-methanoindene (dicyclopentadiene), a synthetic rubber, whether or not containing by weight 7 % or more of tricyclopentadiene, and:either an aluminium-alkyl compound,or an organic complex of tungsten,or an organic complex of molybdenum0 %31.12.2013
ex3824909721Mixture of 2-propenoic acid, (1-methylethylidene)bis(4,1-phenyleneoxy-2,1-ethanediyloxy-2,1-ethanediyl)ester with 2-propenoic acid, (2,4,6-trioxo-1,3,5-triazine-1,3,5(2H,4H,6H)-triyl)tri-2,1-ethanediyl ester and 1-hydroxy-cyclohexyl-phenyl ketone in the solution of methyl ethyl ketone and toluene0 %31.12.2014
ex3824909722Preparations containing not less than 47 % by weight of 1,3:2,4-bis-O-benzylidene-D-glucitol0 %31.12.2016
ex3824909723Mixture of urethane acrylates, tripropylene glycoldiacrylate, ethoxylated bisphenol A acrylate and poly(ethyleneglycol) 400 diacrylate0 %31.12.2014
ex3824909724Solution of (chloromethyl)bis(4-fluorophenyl)methylsilane of a nominal concentration of 65 % in toluene0 %31.12.2015
ex3824909725Lithium tantalate wafers, undoped0 %31.12.2013
ex3824909727Preparation, consisting of a mixture of 2,4,7,9-tetramethyldec-5-yne-4,7-diol and propan-2-ol0 %31.12.2015
ex3824909728Preparation containing by weight:85 % or more but not more than 95 % of α-4-(2-cyano-2-butoxycarbonyl)vinyl-2-methoxy-phenyl-ω-hydroxyhexa(oxyethylene), and5 % or more but not more than 15 % of polyoxyethylene (20) sorbitan monopalmitate0 %31.12.2015
ex3824909729Preparation consisting predominantly of γ-butyrolactone and quaternary ammonium salts, for the manufacture of electrolytic capacitors0 %31.12.2013
ex38249097302,4,7,9-Tetramethyldec-5-yne-4,7-diol, hydroxyethylated0 %31.12.2013
ex3824909734Mixture of phytosterols in the form of a crystalline waxy powder, containing by weight:36 % or more, but not more than 79 % of sitosterols,15 % or more, but not more than 34 % of sitostanols,4 % or more, but not more than 25 % of campesterols,0 % or more, but not more than 14 % of campestanols0 %31.12.2013
ex3824909736Preparation based on 2,5,8,11-tetramethyl-6-dodecyn-5,8-diol ethoxylate0 %31.12.2012
ex3824909737Liquid crystal mixture for use in the manufacture of displays0 %31.12.2012
ex3824909738Alkyl carbonate-based preparation, also containing a UV absorber, for use in the manufacture of spectacle lenses0 %31.12.2012
ex3824909739Mixture containing by weight 40 % or more but not more than 50 % of 2-hydroxyethyl methacrylate and 40 % or more but not more than 50 % of glycerol ester of boric acid0 %31.12.2013
ex3824909740Azelaic acid of a purity by weight of 75 % or more but not more than 85 %0 %31.12.2013
ex3824909742Mixed metals oxides, in the form of powder, containing by weight:either 5 % or more of barium, neodymium or magnesium and 15 % or more of titanium,or 30 % or more of lead and 5 % or more of niobium,for use in the manufacture of dielectric films or for use as dielectric materials in the manufacture of multilayer ceramic capacitors0 %31.12.2013
ex3824909744Mixture of phytosterols, not in the form of powder, containing by weight:75 % or more of sterols,not more than 25 % of stanols,for use in the manufacture of stanols/sterols or stanol/sterol esters0 %31.12.2012
ex3824909745Preparations consisting predominantly of ethylene glycol and:either diethylene glycol, dodecandioic acid and ammonia water,or N,N-dimethylformamide,or γ-butyrolactone,or silicon oxide,or ammonium hydrogen azelate,or ammonium hydrogen azelate and silicon oxide,or dodecandioic acid, ammonia water and silicon oxide,for the manufacture of electrolytic capacitors0 %31.12.2013
ex3824909746Carboxylic acid anhydride based hardener for epoxide resin, in liquid form, of a specific weight at 25 °C of 1,15 g/cm3 or more but not more than 1,20 g/cm30 %31.12.2013
ex38249097474-Methoxysalicylaldehyde, dissolved in N-methyl pyrrolidone0 %31.12.2012
ex3824909752Poly(tetramethylene glycol) bis[(2-benzoyl-phenoxy)acetate] with an average polymer chain length of less than 5 monomer units0 %31.12.2013
ex3824909753Poly(ethylene glycol) bis(p-dimethyl)aminobenzoate with an average polymer chain length of less than 5 monomer units0 %31.12.2013
ex38249097542-Hydroxybenzonitrile, in the form of a solution in N,N-dimethylformamide, containing by weight 45 % or more but not more than 55 % of 2-hydroxybenzonitrile0 %31.12.2013
ex3824909758N2-[1-(S)-Ethoxycarbonyl-3-phenylpropyl]-N6-trifluoroacetyl-L-lysyl-N2-carboxy anhydride in a solution of dichloromethane at 37 %0 %31.12.2015
ex38249097593′,4′,5′-Trifluorobiphenyl-2-amine, in the form of a solution in toluene containing by weight 80 % or more but not more than 90 % of 3′,4′,5′-trifluorobiphenyl-2-amine0 %31.12.2015
ex3824909760α-Phenoxycarbonyl-ω-phenoxypoly[oxy(2,6-dibromo-1,4-phenylene) isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl]0 %31.12.2013
ex3824909762Fused magnesia containing by weight 15 % or more of dichromium trioxide0 %31.12.2016
ex3824909763Triethylborane, in the form of a solution in tetrahydrofuran0 %31.12.2013
ex3824909764Aluminium sodium silicate, in the form of spheres of a diameter of:either 1,6 mm or more but not more than 3,4 mm,or 4 mm or more but not more than 6 mm0 %31.12.2013
ex3824909765Preparation containing by weight:89 % or more but not more than 98,9 % of 1,2,3-trideoxy-4,6:5,7-bis-O-[(4-propylphenyl)methylene]-nonitol,0,1 % or more but not more than 1 % of colourants,1 % or more but not more than 10 % of fluoropolymers0 %31.12.2016
ex3824909766Mixture of primary tert-alkylamines0 %31.12.2014
ex3824909770Paste containing by weight 75 % or more, but not more than 85 % of copper, and also containing inorganic oxides, ethyl cellulose and a solvent0 %31.12.2012
ex3824909772Solution containing by weight 80 % or more of 2,4,6-trimethylbenzaldehyde in acetone0 %31.12.2013
ex3824909773Particles of silicon dioxide on which are covalently bonded organic compounds, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges0 %31.12.2013
ex3824909775Poly(tetramethylene glycol) bis[(9-oxo-9H-thioxanthen-1-yloxy)acetate] with an average polymer chain length of less than 5 monomer units0 %31.12.2013
ex3824909777Diethylmethoxyborane, in the form of a solution in tetrahydrofuran0 %31.12.2013
ex3824909778Mixture of phytosterols derived from wood and wood based oils (tall oil), in the form of powder with a particle size not more than 300 μm, containing by weight:60 % or more, but not more than 80 % of sitosterols,not more than 15 % of campesterols,not more than 5 % of stigmasterols,not more than 15 % of betasitostanols0 %31.12.2012
ex3824909779Mixture of 80 % (± 10 %) of 1-[2-(2-aminobutoxy)ethoxy]but-2-ylamine and 20 % (± 10 %) of 1-({[2-(2-aminobutoxy)ethoxy]methyl} propoxy)but-2-ylamine0 %31.12.2013
ex3824909782α-(2,4,6-Tribromophenyl)-ω-(2,4,6-tribromophenoxy)poly[oxy(2,6-dibromo-1,4-phenylene)isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl]0 %31.12.2013
ex3824909784Reaction product, containing by weight:1 % or more but not more than 40 % of molybdenum oxide,10 % or more but not more than 50 % of nickel oxide,30 % or more but not more than 70 % of tungsten oxide0 %31.12.2013
ex3824909788Oligomeric reaction product, consisting of bis(4-hydroxyphenyl) sulfone and 1,1′-oxybis(2-chloroethane)0 %31.12.2014
ex3824909789Oligomer of tetrafluoroethylene, having tetrafluoroiodoethyl end-groups0 %31.12.2013
ex3824909790Hollow spheres of fused aluminosilicate containing 65-80 % amorphous aluminosilicate, with the following characteristics:a melting point of between 1600 °C and 1800 °C,a density of 0,6 - 0,8 g/cm3,for use in the manufacture of particle filters in motor vehicles0 %31.12.2013
ex3824909792Preparation, consisting of 2,4,7,9-tetramethyldec-5-yne-4,7-diol and silicon dioxide0 %31.12.2014
ex3824909795Mixture of phytosterols, in the form of flakes and balls, containing by weight 80 % or more of sterols and not more than 4 % of stanols0 %31.12.2014
ex3824909797Preparation containing by weight either 10 % or more but not more than 20 % of lithiumfluorophosphate or 5 % or more but not more than 10 % of lithium perchlorate in mixtures of organic solvents0 %31.12.2013
ex3901101010Linear low density polyethylene, of a specific gravity of 0,90 or more but not more than 0,95, and containing by weight:96 % (± 1 %) of ethylene, andnot more than 4 % of hexene0 %31.12.2016
ex3901209030
ex3901109020Polyethylene, in the form of granules, of a specific gravity of 0,925 (± 0,0015), a melt flow index of 0,3 g/10 min (± 0,05 g/10 min), for the manufacture of blown films of a haze value not more than 6 % and an elongation at break (MD/TD) of 210/3400 %31.12.2013
ex3901109030Polyethylene granules, containing by weight 15 % or more but not more than 25 % of copper0 %31.12.2016
ex3901209010Polyethylene, in one of the forms mentioned in note 6(b) to Chapter 39, of a specific gravity of 0,945 or more but not more than 0,985, for the manufacture of films for typewriter ribbon or similar ribbon0 %31.12.2013
ex3901209020Polyethylene, containing by weight 35 % or more but not more than 45 % of mica0 %31.12.2013
ex3901300080Ethylene-vinyl acetate copolymer,containing 27,8 % or more but not more than 29,3 % by weight of vinyl acetate,with a melt flow index of 22 g/10 min or more but no more than 28 g/10 min,containing not more than 15 mg/kg vinyl acetate monomer0 %31.12.2015
ex3901300082Ethylene-vinyl acetate copolymer,containing 9,8 % or more but not more than 10,8 % by weight of vinyl acetate,with a melt flow index of 2,5 g/10 min or more but no more than 3,5 g/10 min,containing not more than 15 mg/kg vinyl acetate monomer0 %31.12.2015
ex3901909080Block copolymer of ethylene with octene in the form of pellets:with a specific gravity of 0,862 or more, but not more than 0,865,able to stretch to at least 200 % its original length,with a hysteresis of 50 % (± 10 %),with permanent deformation of not more than 20 %,for use in the manufacture of napkin liners for babies0 %31.12.2015
ex3901909082Copolymer of ethylene and methacrylic acid0 %31.12.2015
ex3901909091Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid4 %31.12.2013
ex3901909092Chlorosulphonated polyethylene0 %31.12.2013
ex3901909093Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticiser in the manufacture of roof sheets0 %31.12.2013
ex3901909094Mixtures of A-B block copolymer of polystyrene and ethylene-butylene copolymer and A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35 % of styrene0 %31.12.2013
ex3901909097Chlorinated polyethylene, in the form of powder0 %31.12.2013
ex3902100010Polypropylene containing no plasticiser and not more than:7 mg/kg of aluminium,2 mg/kg of iron,1 mg/kg of magnesium,8 mg/kg of chloride0 %31.12.2013
ex3902100020Polypropylene, containing no plasticiser,of a melting point of more than 150 °C (as determined by the ASTM D 3417 method),of a heat of fusion of 15 J/g or more but not more than 70 J/g,of an elongation at break of 1000 % or more (as determined by the ASTM D 638 method),of a tensile modulus of 69 MPa or more but not more than 379 MPa (as determined by the ASTM D 638 method)0 %31.12.2013
ex3902100030Polypropylene, containing not more than 1 mg/kg of aluminium, 0,05 mg/kg of iron, 1 mg/kg of magnesium and 1 mg/kg of chloride, for use in the manufacture of packaging for disposable contact lenses0 %31.12.2013
ex3902100040Polypropylene, containing no plasticiser:of a tensile strength: of 32-60 MPa (as determined by the ASTM D638 method),of a flexural strength of 50-90 MPa (as determined by the ASTM D790 method),of a Melt Flow Rate (MFR) at 230 °C/ 2,16 kg of 5-15 g/10 min (as determined by the ASTM D1238 method),with 40 % or more but not more than 80 % by weight of polypropylene,with 10 % or more but not more than 30 % by weight of glass fibre,with 10 % or more but not more than 30 % by weight of mica0 %31.12.2014
ex3902100050High isotactic polypropylene (HIPP), whether or not coloured, intended for the manufacture of plastic components for air freshener with the following properties:a density of 0,880 g/cm3 or more but not more than 0,913 g/cm3 (as determined by test method ASTM D1505),a tensile strength at yield of 350 kg/cm2 or more but not more than 390 kg/cm2 (as determined by test method ASTM D638),a heat deflection temperature of 135 °C or more under load of 0,45 MPa (as determined by test method ASTM 648)0 %31.12.2015
ex3902200010Polyisobutylene, of a number average molecular weight (Mn) of 700 or more but not more than 8000 %31.12.2013
ex3902200020Hydrogenated polyisobutene, in liquid form0 %31.12.2013
ex3902300091A-B Block copolymer of polystyrene and an ethylene-propylene copolymer, containing by weight 40 % or less of styrene, in one of the forms mentioned in note 6(b) to Chapter 390 %31.12.2013
ex3902300095A-B-A block copolymer, consisting of:a copolymer of propylene and ethylene, and21 % (± 3 %) by weight of polystyrene0 %31.12.2016
ex3902300097Liquid ethylene-propylene-copolymer with:a flashpoint of 250 °C or more,a viscosity index of 150 or more,of a number average molecular weight (Mn) of 650 or more0 %31.12.2016
ex3902909052Amorphous poly-alpha-olefin copolymer blend of poly(propylene-co-1-butene) and petroleum hydrocarbon resin0 %31.12.2013
ex3902909055Thermoplastic elastomer, with an A-B-A block copolymer structure of polystyrene, polyisobutylene and polystyrene containing by weight 10 % or more but not more than 35 % of polystyrene0 %31.12.2013
ex3902909060Non-hydrogenated 100 % aliphatic resin (polymer), with the following characteristics:liquid at room temperature,obtained by cationic polymerisation of C-5 alkenes monomers,with a number average molecular weight (Mn) of 370 (± 50),with a weight average molecular weight (Mw) of 500 (± 100)0 %31.12.2014
ex3902909084Blend of hydrogenated styrenic block copolymer, polyethylene wax, and tackifier resin, in the form of pellets, containing by weight:70 (± 5) % of styrenic block copolymer,15 (± 5) % of polyethylene wax, and15 (± 5) % of tackifier resin,with the following physical properties:able to stretch to at least 200 % of its original length,with a hysteresis of 50 (± 10) %,with a permanent deformation of no more than 20 %,for use in the manufacture of napkins and napkin liners for babies0 %31.12.2015
ex3902909092Polymers of 4-methylpent-1-ene0 %31.12.2013
ex3902909093Synthetic poly-alpha-olefin having a viscosity of at least 38 × 10-6m2s-1 (38 centistokes) at 100 °C measured using the ASTM D 445 method0 %31.12.2016
ex3902909098Synthetic poly-alpha-olefin with a viscosity at 100 ° Celsius (measured according to method ASTM D 445) ranging from 3 centistokes to 9 centistokes and obtained by polymerisation of a mixture of dodecene and tetradecene, containing a maximum of 40 % of tetradecene0 %31.12.2016
ex3903110010White expandable polystyrene beads with a thermal conductivity of not more than 0,034 W/mK at a density of 14,0 kg/m3 (± 1,5 kg/m3), containing 50 % recycled material0 %31.12.2013
ex3903190030Crystalline polystyrene with a melting point of 268 °C or more but not more than 272 °C and a setting point of 232 °C or more but not more than 242 °C, whether or not containing additives and filling material0 %31.12.2016
ex3903909010Butadiene-styrene copolymer pellets or granules, with:a specific gravity of 1,05 (± 0,02),a melt flow index at 200 °C/5 kg of 13 g/10 min (± 1 g/10 min)0 %31.12.2016
ex3903909015Dry ink powder or toner blend, consisting of a copolymer of styrene, n-butyl acrylate, n-butyl methacrylate, methacrylic acid and polyolefin wax, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers0 %31.12.2016
ex3903909020Dry ink powder or toner blend, consisting of a copolymer of styrene, n-butyl acrylate, n-butyl methacrylate and polyolefin wax, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers0 %31.12.2016
ex3903909025Dry ink powder or toner blend, consisting of a copolymer of styrene, n-butyl acrylate, methacrylic acid and polyolefin wax, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers0 %31.12.2016
ex3903909030Butadiene-styrene copolymer pellets with a melting point of 85 °C (± 5 °C), containing by weight:2 % or more but not more than 4 % of tris(tribromophenyl) triazine,5 % or more but not more than 10 % of ethane-1,2-bis(pentabromophenyl),3 % or more but not more than 5 % of antimony trioxide0 %31.12.2016
ex3903909035Copolymer of α-methylstyrene and styrene, having a softening point of more than 113 °C0 %31.12.2013
ex3903909040Copolymer of styrene with α-methylstyrene and acrylic acid, of a number average molecular weight (Mn) of 500 or more but not more than 60000 %31.12.2013
ex3911909950
ex3903909045Styrene copolymer granules in primary forms, containing by weight:91 % (± 0,5 %) of styrene,8 % (± 0,8 %) of butadiene,1 % (± 0,04 %) of additives (colourant)0 %31.12.2016
ex3903909050Crystalline copolymer of styrene and p-methylstyrene:with a melting point of 240 °C or more but not more than 260 °C,containing 5 % or more but not more than 15 % by weight of p-methylstyrene0 %31.12.2015
ex3903909065Copolymer of styrene, butyl acrylate, butyl methacrylate, methyl methacrylate and acrylic acid, in the form of powder, containing by weight 81 % (± 1 %) of styrene, 6 % (± 1 %) of butyl acrylate, 5 % (± 1 %) of butyl methacrylate, 7 % (± 1 %) of methyl methacrylate and 1 % (± 0,5 %) of acrylic acid0 %31.12.2013
ex3903909075Copolymer of styrene and vinyl pyrrolidone, containing by weight not more than 1 % of sodium dodecyl sulphate, in the form of an aqueous emulsion, for the manufacture of goods of subheading 33052000 or of hair dyes of subheading 3305900 %31.12.2013
ex3903909080Granules of copolymer of styrene and divinylbenzene of a minimum diameter of 150 μm and a maximum diameter of 800 μm and containing by weight:minimum 65 % styrene,maximum 25 % divinylbenzene,for use in the manufacture of ion exchange resins0 %31.12.2013
ex3903909086Mixture containing by weight:45 % or more but not more than 65 % of polymers of styrene,35 % or more but not more than 45 % of poly(phenylene ether),not more than 10 % of other additives,and with one or more of the following special colour effects:metallic or pearlescent with a visual angular metamerism caused by at least 0,3 % flake-based pigment,fluorescent, as characterised by emitting light during absorption of ultraviolet radiation,bright white, as characterised by L* not less than 92 and b* not more than 2 and a* between -5 and 7 on the CIELab colour scale0 %31.12.2013
ex3904100020Poly(vinyl chloride) powder, not mixed with any other substances or containing any vinyl acetate monomers, with:a degree of polymerisation of 1000 (± 300) monomer units,a coefficient of heat transmission (K-value) of 60 or more, but not more than 70,a volatile material content of less than 2,00 % by weight,a sieve non-passing fraction at a mesh width of 120 μm of not more than 1 % by weight,for use in the manufacture of battery separators0 %31.12.2014
ex3904300020Copolymer of vinyl chloride with vinyl acetate and maleic acid, containing by weight:80,5 % or more but not more than 81,5 % of vinyl chloride,16,5 % or more but not more than 17,5 % of vinyl acetate, and1,5 % or more but not more than 2,5 % of maleic acid,for use in the heat-sealing of plastics onto steel substrate for industrial uses0 %31.12.2014
ex3904400091Copolymer of vinyl chloride with vinyl acetate and vinyl alcohol, containing by weight:87 % or more but not more than 92 % of vinyl chloride,2 % or more but not more than 9 % of vinyl acetate, and1 % or more but not more than 8 % of vinyl alcohol,in one of the forms mentioned in note 6(a) or (b) to Chapter 39, for the manufacture of goods of headings 3215 or 8523 or for use in the manufacture of coatings for containers and closures of a kind used for preserving food and drink0 %31.12.2013
ex3904400093Copolymer of vinyl chloride and methyl acrylate, containing by weight 80 % (± 1 %) of vinyl chloride and 20 % (± 1 %) of methyl acrylate, in the form of a aqueous emulsion0 %31.12.2013
ex3904509092Vinylidene-chloride methacrylate co-polymer for use in the manufacture of monofilaments0 %31.12.2014
ex3904610010Mixture of polytetrafluoroethylene and mica, in one of the forms mentioned in note 6(b) to Chapter 390 %31.12.2013
ex3904610020Copolymer of tetrafluoroethylene and trifluoro(heptafluoropropoxy)ethylene, containing 3,2 % or more but not more than 4,6 % by weight of trifluoro(heptafluoropropoxy)ethylene and less than 1 mg/kg of extractable fluoride ions0 %31.12.2013
ex3904610030Polytetrafluoroethylene, in the form of powder, of a specific surface of 8 m2/g or more but not more than 12 m2/g, a particle size distribution of 10 % of less than 10 μm and 90 % of less than 35 μm and an average particle size of 20 μm0 %31.12.2013
ex3904698081Poly(vinylidene fluoride)0 %31.12.2015
ex3904698093Copolymer of ethylene with chlorotrifluoroethylene, in one of the forms mentioned in note 6(b) to Chapter 390 %31.12.2013
ex3904698094Copolymer of ethylene and tetrafluoroethylene0 %31.12.2013
ex3904698096Polychlorotrifluoroethylene, in one of the forms mentioned in note 6(a) and (b) to Chapter 390 %31.12.2013
ex3904698097Copolymer of chlorotrifluoroethylene and vinylidene difluoride0 %31.12.2013
ex3905999092Polymer of vinylpyrrolidone and dimethylaminoethyl methacrylate, containing by weight 97 % or more but not more than 99 % of vinylpyrrolidone, in the form of a solution in water0 %31.12.2013
ex3905999095Hexadecylated or eicosylated polyvinylpyrrolidone0 %31.12.2013
ex3905999096Polymer of vinyl formal, in one of the forms mentioned in note 6(b) to Chapter 39, of a weight average molecular weight (Mw) of 25000 or more but not more than 150000 and containing by weight:9,5 % or more but not more than 13 % of acetyl groups evaluated as vinyl acetate, and5 % or more but not more than 6,5 % of hydroxy groups evaluated as vinyl alcohol0 %31.12.2013
ex3905999097Povidone (INN)-iodine0 %31.12.2013
ex3905999098Poly(vinyl pyrrolidone) partially substituted by triacontyl groups, containing by weight 78 % or more but not more than 82 % of triacontyl groups0 %31.12.2013
ex3906100010Poly(methyl methacrylate) pellets or granules with a specific gravity of 1,19 (± 0,03), and containing by weight 0,02 % or more but not more than 1,2 % of anti-oxidant0 %31.12.2016
39069060Copolymer of methyl acrylate with ethylene and a monomer containing a non-terminal carboxy group as a substituent, containing by weight 50 % or more of methyl acrylate, whether or not mixed with silicon dioxide0 %31.12.2013
ex3906909010Polymerisation product of acrylic acid with small quantities of a polyunsaturated monomer, for the manufacture of medicaments of heading 3003 or 30040 %31.12.2013
ex3906909015Photosensitive resin consisting of modified acrylate, acrylic monomer, catalyst (photoinitiator) and stabiliser0 %31.12.2013
ex3906909020Polymerisation product of acrylic acid with small quantities of a polyunsaturated monomer, for use as a stabiliser in emulsions or dispersions with a pH of more than 136 %31.12.2013
ex3906909025Transparent liquid, insoluble in water, containing by weight:50 % or more, but not more than 51 % of poly(methyl metacrylate) copolymer,37 % or more, but not more than 39 % of xylene, and11 % or more, but not more than 13 % of n-butyl acetate0 %31.12.2013
ex3906909030Copolymer of styrene with hydroxyethyl methacrylate and 2-ethylhexyl acrylate, of a number average molecular weight (Mn) of 500 or more but not more than 60000 %31.12.2013
ex3906909035White powder of 1,2-ethanediol dimethacrylate-methyl methacrylate copolymer of a particle size of not more than 18 μm, insoluble in water0 %31.12.2013
ex3906909040Transparent acrylic polymer in packages of not more than 1 kg, and not for retail sale with:a viscosity of not more than 50000 Pa·s at 120 °C as determined by the test method ASTM D 3835,a weight average molecular weight (Mw) of more than 500000 but not more than 1200000 according to the Gel Permeation Chromatography (GPC) test,a residual monomer content of less than 1 %0 %31.12.2015
ex3906909041Poly(alkyl acrylate) with an ester alkyl chain of C10 to C300 %31.12.2014
ex3906909045Acrylonitrile-butadiene-styrene-methylmethacrylate copolymer pellets with:a melting point of 96 °C (± 3 °C),a specific gravity of 1,03 or more but not more than 1,07, andcontaining by weight:25 % or more but not more than 50 % of acrylonitrile-butadiene-styrene, and50 % or more but not more than 75 % of methylmethacrylate0 %31.12.2016
ex3906909050Polymers of esters of acrylic acid with one or more of the following monomers in the chain:chloromethyl vinyl ether,chloroethyl vinyl ether,chloromethylstyrene,vinyl chloroacetate,methacrylic acid,butenedioic acid monobutyl ester,containing by weight not more than 5 % of each of the monomeric units, in one of the forms mentioned in note 6(b) to Chapter 390 %31.12.2013
ex3906909065Polyalkylacrylate, chemically modified with cobalt, with a melting temperature (Tm) of 65 °C (± 5 °C), measured with Differential Scanning Calorimetry (DSC)0 %31.12.2013
ex3906909080Polydimethylsiloxane-graft-(polyacrylates; polymethacrylates)0 %31.12.2013
ex3906909085Non-aqueous dispersion type polymers of esters of acrylic acid with a hydrolyzable silyl group at one or both polymer ends0 %31.12.2013
ex3907201110Poly(ethylene oxide) of a number average molecular weight (Mn) of 100000 or more0 %31.12.2013
ex3907201120Bis[Methoxypoly[ethyleneglycol)]-maleimidopropionamide, chemically modified with lysine, of a number average molecular weight (Mn) of 400000 %31.12.2013
ex3907201130Bis[Methoxypoly[ethyleneglycol)], chemically modified with lysine, bis(maleimide) terminated, of a number average molecular weight (Mn) of 400000 %31.12.2013
ex3907201140Polyethylene glycol with an ethylene oxide chain length of not more than 30, having butyl-2-cyano 3-(4-hydroxyphenyl) acrylate end groups, for use as a UV barrier in liquid masterbatches0 %31.12.2015
ex3907202011Mixture, containing by weight 70 % or more but not more than 80 % of a polymer of glycerol and 1,2-epoxypropane and 20 % or more but not more than 30 % of a copolymer of dibutyl maleate and N-vinyl-2-pyrrolidone0 %31.12.2013
ex3907202012Copolymer of tetrahydrofuran and tetrahydro-3-methylfuran with a number average molecular weight (Mn) of 3500 (± 100)0 %31.12.2013
ex3907209915Poly(oxypropylene) having alkoxysilyl end-groups0 %31.12.2013
ex3907209930Homopolymer of 1-chloro-2,3-epoxypropane (epichlorohydrin)0 %31.12.2013
ex3907209935Polyethylene glycol chemically modified with an isocyanate group containing a carbodiimide group, in the form of a solution in 2-methoxy-1-methylethyl acetate0 %31.12.2013
ex3907209945Copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy end-groups0 %31.12.2013
ex3907209950Vinyl-silyl terminated perfluoropolyether polymer or an assortment of two components consisting of the same type of vinyl-silyl terminated perfluoropolyether polymer as the main ingredient0 %31.12.2013
ex3907209955Succinimidyl ester of methoxy poly(ethylene glycol)propionic acid, of a number average molecular weight (Mn) of 50000 %31.12.2013
ex3907209960Polytetramethylene oxide di-p-aminobenzoate0 %31.12.2016
ex3907300040Epoxide resin, containing by weight 70 % or more of silicon dioxide, for the encapsulation of goods of headings 8533, 8535, 8536, 8541, 8542 or 85480 %31.12.2013
ex3926909770
ex3907300050Liquid epoxide resin of 2-propenenitrile/1,3-butadiene-epoxide copolymer, not containing any solvent, with:a zinc borate hydrate content of not more than 40 % by weight,a diantimony trioxide content of not more than 5 % by weight0 %31.12.2013
ex3907400010Polycarbonate pellets:containing not more than 15 % by weight of non-halogen flame retardant, andwith a specific gravity of 1,20 (± 0,01)0 %31.12.2016
ex3907400020Polycarbonate pellets with a specific gravity of 1,32 (± 0,03), containing 20 % (± 5 %) of glass fibre0 %31.12.2016
ex3907400030Polycarbonate pellets with a specific gravity of 1,18 or more but not more than 1,25, containing by weight:77 % or more but not more than 90 % of polycarbonate,8 % or more but not more than 20 % of phosphoric acid ester,0,1 % or more but not more than 1 % of anti-oxidant, andwhether or not containing 1 % or more but not more than 5 % of flame retardant0 %31.12.2016
ex3907400040Polycarbonate granules with:a melt flow rate of 18 g/10 min/300 °C/1,2 kg (according to ASTM D 1238)a tensile strength of 69 MPa according to ASTM D 638, anda flexural strength of 112 MPa according to ASTM D 7900 %31.12.2016
ex3907400050Polycarbonate resin, with:a specific gravity of 1,20 (± 0,05),a heat deflection temperature of 146 °C (± 3 °C) at 4,6 kgf/cm2, anda melt flow index of 20 (± 10) g/10 min at 300 °C/1,2 kg0 %31.12.2016
ex3907400060Polycarbonate acrylonitrile-butadiene-styrene pellets with specific gravity of 1,20 (± 0,05), containing by weight:65 % or more but not more than 90 % of polycarbonate,5 % or more but not more than 15 % of acrylonitrile-butadiene-styrene,5 % or more but not more than 20 % of phosphoric acid ester, and0,1 % or more but not more than 5 % of anti oxidant0 %31.12.2016
ex3907608010Copolymer of terephthalic acid and isophthalic acid with ethylene glycol, butane-1,4-diol and hexane-1,6-diol0 %31.12.2013
ex3907608030Oxygen binding concentrate consisting of a blend of:a copolymer obtained from poly(ethylene terephthalate), pyromellitic dianhydride (PMDA) and a hydroxyl substituted polybutadiene,a barrier co-polymer (as determined by the ASTM method F1115-95 (2001)) obtained from xylylene diamines and adipic acid, andorganic dyes and/or organic and inorganic pigments,where the first co-polymer predominates0 %31.12.2013
ex3907608040Poly(ethylene terephthalate) pellets:with a specific gravity of 1,23 or more but not more than 1,27 at 23 °C, andcontaining not more than 10 % by weight of other modifiers or additives0 %31.12.2016
39077000Poly(lactic acid)0 %31.12.2013
ex3907919010Diallyl phthalate prepolymer, in powder form0 %31.12.2014
ex3907999010Poly(oxy-1,4-phenylenecarbonyl), in the form of powder0 %31.12.2013
ex3907999015Poly[1-(2′-hydroxyethyl)-2,2,6,6-tetramethyl-4-hydroxy-piperidylsuccinate]0 %31.12.2016
ex3907999020Liquid crystal copolyester with a melting point of not less than 270 °C, whether or not containing fillers0 %31.12.2013
ex3907999030Poly(hydroxyalkanoate), predominantly consisting of poly(3-hydroxybutyrate)0 %31.12.2015
ex3907999060Copolymer of terephthalic acid and isophthalic acid with bisphenol A0 %31.12.2012
ex3907999070Copolymer of poly(ethylene terephthalate) and cyclohexane dimethanol, containing more than 10 % by weight of cyclohexane dimethanol0 %31.12.2014
ex3907999080Copolymer, consisting of 72 % by weight or more of terephthalic acid and/ or derivatives thereof and cyclohexanedimethanol, completed with linear and/ or cyclic dioles0 %31.12.2015
ex3908900010Poly(iminomethylene-1,3-phenylenemethyleneiminoadipoyl), in one of the forms mentioned in note 6(b) to Chapter 390 %31.12.2013
ex3908900030Reaction product of mixtures of octadecanecarboxylic acids polymerised with an aliphatic polyetherdiamine0 %31.12.2013
ex3908900050Oxygen binding concentrate consisting of a blend of:a copolymer obtained from poly(ethyleneterephthalate), pyromellitic dianhydride (PMDA) and a hydroxyl substituted polybutadiene,a barrier co-polymer (as determined by the ASTM method F1115-95 (2001)) obtained from xylylene diamines and adipic acid, andorganic dyes and/or organic and inorganic pigments,where the second co-polymer predominates0 %31.12.2013
ex3909400010Polycondensation product of phenol with formaldehyde, in the form of hollow spheres of a diameter of less than 150 μm0 %31.12.2013
ex3909400020Powder of thermosetting resin in which magnetic particles have been evenly distributed, for use in the manufacture of toner bottles for photocopiers, fax machines, printers and multifunction devices0 %31.12.2015
ex3909509010UV-curable liquid photopolymer consisting of a mixture containing by weight 60 % or more of polyurethanes and 30 % (± 8 %) of acrylates0 %31.12.2014
ex3910000020Block copolymer of poly(methyl-3,3,3-trifluoropropylsiloxane) and poly[methyl(vinyl)siloxane]0 %31.12.2013
ex3910000040Biocompatible silicones for the manufacture of long term surgical implants0 %31.12.2016
ex3910000050Silicone based pressure sensitive adhesive in solvent containing copoly(dimethylsiloxane/diphenylsiloxane) gum0 %31.12.2012
ex3910000060Polydimethylsiloxane, whether or not polyethylene glycol and trifluoropropyl substituted, with methacrylate end groups0 %31.12.2014
ex3911100081Non-hydrogenated Hydrocarbon Resin, obtained by polymerisation of C-5 to C-10 alkenes, cyclopentadiene and dicyclopentadiene, with a Gardner Colour of more than 10 for the pure product or with a Gardner Colour of more than 8 for the 50 % solution by volume in toluene (as determined by the ASTM method D6166)0 %31.12.2013
ex3911901910Poly(oxy-1,4-phenylenesulfonyl-1,4-phenyleneoxy-4,4′-biphenylene)0 %31.12.2013
ex3911901930Copolymer of ethyleneimine and ethyleneimine dithiocarbamate, in an aqueous solution of sodium hydroxide0 %31.12.2012
ex3911901940m- Xylene formaldehyde resin0 %31.12.2016
ex3911909925Copolymer of vinyltoluene and α-methylstyrene0 %31.12.2013
ex39119099301,4:5,8- Dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-, polymer with 3a,4,7,7a- tetrahydro- 4,7-methano-1H-indene, hydrogenated0 %31.12.2015
ex3911909931Copolymers of butadiene and maleic acid, whether or not containing its ammonium salts0 %31.12.2014
ex3911909935Alternated copolymer of ethylene and maleic anhydride (EMA)0 %31.12.2015
ex3911909940Mixed calcium and sodium salt of a copolymer of maleic acid and methyl vinyl ether, having a calcium content of 9 % or more but not more than 16 % by weight0 %31.12.2013
ex3911909945Copolymer of maleic acid and methyl vinyl ether0 %31.12.2013
ex3911909965Calcium zinc salt of a copolymer of maleic acid and methyl vinyl ether0 %31.12.2013
ex3911909970Aqueous solution containing by weight:30 % or more but not more than 40 % of poly-4-vinylpyridine-N-oxide,0,1 % or more but not more than 4 % of isonicotinic acid-N-oxide,0,1 % or more but not more than 3,5 % of sodium sulphate,0,1 % or more but not more than 2 % of 4-acetylpyridine-N-oxide0 %31.12.2016
ex3911909975Poly(ethyleneimine)0 %31.12.2016
ex3911909986Copolymer of methyl vinyl ether and maleic acid anhydride0 %31.12.2016
ex3912110030Cellulose triacetate0 %31.12.2016
ex3912110040Cellulose diacetate powder0 %31.12.2015
ex3912398510Ethylcellulose, not plasticised0 %31.12.2013
ex3912398520Ethylcellulose, in the form of an aqueous dispersion containing hexadecan-1-ol and sodium dodecyl sulphate, containing by weight 27 (± 3) % of ethylcellulose0 %31.12.2013
ex3912398530Cellulose, both hydroxyethylated and alkylated with alkyl chain-lengths of 3 or more carbon atoms0 %31.12.2013
ex3912398540Hypromellose (INN)0 %31.12.2016
ex3912901010Cellulose acetate propionate, non-plasticised, in the form of powder:containing by weight 25 % or more of propionyl (as determined by the ASTM D 817-72 method), andof a viscosity of not more than 120 poise (as determined by the ASTM D 817-72 method),for the manufacture of printing inks, paints, lacquers and other coatings, and reprographic coatings0 %31.12.2013
ex3912901020Hydroxypropyl methylcellulose phthalate0 %31.12.2013
ex3913900081Blend of cyanoethyl pullulan and cyanoethyl poly(vinyl alcohol)0 %31.12.2013
ex3913900085Sterile sodium hyaluronate0 %31.12.2013
ex3913900092Protein, chemically modified by carboxylation and/or phthalic acid addition, having a weight average molecular weight (Mw) of 100000 to 3000000 %31.12.2013
ex3913900094Granules containing by weight:35 % or more but less than 75 % of a high amylose extruded biopolymer produced from corn starch,5 % or more but less than 16 % polyvinyl alcohol,10 % or more but less than 46 % of polyol plasticisers,0,25 % or more but less than 3 % of stearic acid,whether or not containing 30 % (± 10 %) of biodegradable polyester resin but never to a level that exceeds the amount of the high amylose biopolymer0 %31.12.2016
ex3913900095Chondroitinsulphuric acid, sodium salt0 %31.12.2013
ex3913900096Powder consisting of 90 % (± 5 %) by weight of a high amylose extruded biopolymer produced from corn starch, 10 % (± 5 %) by weight of a synthetic polymer and 0,5 % (± 0,25 %) of stearic acid0 %31.12.2016
ex3916200091Profiles of poly(vinyl chloride) of a kind used in the manufacture of sheet pilings and facings, containing the following additives:titanium dioxide,poly(methyl methacrylate),calcium carbonate,binding agents0 %31.12.2014
ex3917320091Pipe consisting of a block copolymer of polytetrafluoroethylene and polyperfluoroalkoxytrifluoroethylene, of a length of not more than 600 mm, a diameter of not more than 85 mm and a wall-thickness of 30 μm or more but not more than 110 μm0 %31.12.2013
ex3917400091Plastic connectors containing O-rings, a retainer clip and a release system for insertion into car fuel hoses0 %31.12.2014
ex3919101910Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film0 %31.12.2013
ex3919108025
ex3919900031
ex3919101920Rolls of two-sided adhesive tape:coated with non-vulcanised natural or synthetic rubber,with a width of 20 mm or more but not more than 40 mm,containing silicone, aluminium hydroxide, acryl and urethane0 %31.12.2013
ex3919108021Reflecting sheet, consisting of:a polycarbonate or acrylic polymer film totally embossed on one side in a regular shaped pattern,covered on both sides with one or more layers of plastic material,whether or not covered on one side with a self-adhesive layer and a release sheet0 %31.12.2013
ex3919900021
ex3920610020
ex3919108023Reflecting film, consisting of several layers including:poly(vinyl chloride),polyurethane with, on one side, imprints against counterfeiting, alteration or substitution of data or duplication, and on the other side, a layer of glass microspheres,a layer incorporating a security and/or official mark which changes appearance with angle of view,metallised aluminium,and adhesive, covered on one side with a release liner0 %31.12.2014
ex3919108027Polyester film:coated on one side with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner, andon the other side not coated or coated with an acrylic pressure sensitive adhesive or with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner0 %31.12.2014
ex3919900020
ex3919108030Double-sided, self-adhesive modified epoxy resin foil, put up in rolls, 10 to 20 cm wide, 10 to 210 m long and with a total thickness of 10 to 50 μm, not for retail sale0 %31.12.2016
ex3919108032Polytetrafluoroethylene film:with a thickness of 110 μm or more,with a surface resistance of between 102-1014 ohms as determined by test method ASTM D 257,coated on one side with an acrylic pressure sensitive adhesive0 %31.12.2014
ex3919108035Reflecting film, consisting of a layer of poly(vinyl chloride), a layer of alkyd polyester, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, only visible by means of a retroreflecting lighting, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film0 %31.12.2013
ex3919108037Polytetrafluoroethylene film:with a thickness of 100 μm or more,an elongation at break of not more than 100 %,coated on one side with a pressure sensitive silicon adhesive0 %31.12.2014
ex3919108040Black poly(vinyl chloride) film:with a gloss of more than 30 degrees according to ASTM D2457,whether or not covered on one side with a protective poly(ethyleneterephthalate) film, and on the other side with a pressure sensitive adhesive with channels and a release liner0 %31.12.2016
ex3919900043
ex3919108045Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38 mm or more but not more than 1,53 mm0 %31.12.2012
ex3919900045
ex3919108050Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 μm or more and an adhesive part of acrylic type of a thickness of 5 μm or more, for use in the grinding and/or dicing process of silicon discs0 %31.12.2013
ex3919900041
ex3920108925
ex3919108055Acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic pressure sensitive adhesive and a release sheet, of a peel adhesion at an angle of 90 ° of more than 25 N/cm (as determined by the ASTM D 3330 method)0 %31.12.2012
ex3919900053
ex3919108060Reflecting laminated sheet showing a regular pattern, consisting of a film of poly(methylmethacrylate), followed by a layer of acrylic polymer containing microprisms, a film of poly(methylmethacrylate), an adhesive layer and a release sheet0 %31.12.2013
ex3919108065Self-adhesive reflecting sheet whether or not in segmented pieces:showing a regular pattern,with or without an application tape layer,consisting of a film of acrylic polymer followed by a layer of poly(methyl methacrylate) containing microprisms,whether or not containing an additional layer of polyester, andan adhesive with a final release sheet0 %31.12.2013
ex3919900057
ex3919108070Rolls of polyethylene foil:self-adhesive on one side,of a total thickness of 0,025 mm or more, but not more than 0,09 mm,of a total width of 60 mm or more, but not more than 910 mm,of a kind used for the protection of the surface of products of headings 8521 and 85280 %31.12.2016
ex3919900075
ex3919108075Self adhesive reflecting film, consisting of several layers including:a copolymer of acrylic resin,polyurethane,a metalised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use,glass microspheres, andan adhesive layer, with a release liner on one or both sides0 %31.12.2016
ex3919900080
ex3919900019Transparent poly(ethylene terephthalate) self-adhesive film:free from impurities or faults,coated on one side with an acrylic pressure sensitive adhesive and a protective liner, and on the other side with an antistatic layer of ionic organic choline compound,whether or not with a printable dust-proof layer of modified long chain alkyl organic compound,with a total thickness without the liner of 54 μm or more but not more than 64 μm, anda width of more than 1295 mm but not more than 1305 mm0 %31.12.2013
ex3919900022Black polypropylene film:with a gloss of more than 20 degrees as determined by test method ASTM D2457,whether or not covered on one side with a protective poly(ethylene terephthalate) film and on the other side with a pressure sensitive adhesive with channels and a release liner0 %31.12.2014
ex3919900023Film consisting of 1 to 3 laminated layers of poly(ethylene terephthalate) and a copolymer of terephthalic acid, sebacic acid and ethylene glycol, coated on one side with an acrylic abrasion resistant coating and on the other side with an acrylic pressure sensitive adhesive, a water soluble methylcellulose coating and a poly(ethylene terephthalate) protective liner0 %31.12.2013
ex3919900024Reflecting laminated sheet:consisting of an epoxy acrylate layer embossed on one side in a regular shaped pattern,covered on both sides with one or more layers of plastic material, andcovered on one side with an adhesive layer and a release sheet0 %31.12.2014
ex3919900025Film consisting of a multi-layer construction of poly(ethylene terephthalate) and copolymer of butylacrylate and methylmethacrylate, coated on one side with an acrylic abrasion resistant coating incorporating nanoparticles of antimony tin oxide and carbon black, and on the other side with an acrylic pressure sensitive adhesive and a silicone-coated poly(ethylene terephthalate) protective liner0 %31.12.2012
ex3919900026Ethylene vinyl acetate film:of a thickness of 100 μm or more,coated on one side with an acrylic pressure sensitive or UV-sensitive adhesive and a polyester liner0 %31.12.2014
ex3919900027Poly(ethylene terephthalate) film, with an adhesive strength of not more than 0,147 N/25 mm and an electrostatic discharge of not more than 500 V0 %31.12.2013
ex3919900028Poly(vinyl chloride) or polyethylene or any other polyolefine film:of a thickness of 65 μm or more,coated on one side with an acrylic UV-sensitive adhesive and a polyester liner0 %31.12.2014
ex3919900029Polyester film coated on both sides with an acrylic and/or rubber (pressure sensitive) adhesive put up in rolls of a width of 45,7 cm or more but not more than 132 cm (supplied with a release liner)0 %31.12.2014
ex3919900033Transparent poly(ethylene) self-adhesive film, free from impurities or faults, coated on one side with an acrylic pressure sensitive adhesive, with a thickness of 60 μm or more, but not more than 70 μm, and with a width of more than 1245 mm but not more than 1255 mm0 %31.12.2013
ex3919900035Reflecting layered sheet on rolls, with a width of more than 20 cm, showing an embossed regular pattern, consisting of poly(vinyl chloride) film coated on one side with:a layer of polyurethane containing glass micro beads,a layer of poly(ethylene vinyl acetate),an adhesive layer, anda release sheet0 %31.12.2013
ex3919900037UV-absorbing film of poly (vinyl chloride):with a thickness of 78 μm or more,covered on one side with an adhesive layer and with a release sheet,with an adhesive strength of 1764 mN/25 mm or more0 %31.12.2014
ex3919900039Poly(vinyl chloride) sheeting, of a thickness of less than 1 mm, coated with an adhesive in which are embedded glass balls of a diameter of not more than 100 μm0 %31.12.2013
ex3919900047Polariser film, in rolls, consisting of a multilayered polyvinyl alcohol film, supported on either side by a triacetyl cellulose film, with a pressure sensitive adhesive and release film on one side0 %31.12.2012
ex9001200040
ex3919900049Reflecting laminated sheet consisting of a film of poly(methyl methacrylate) embossed on one side in a regular shaped pattern, a film of a polymer containing glass microspheres, an adhesive layer and a release sheet0 %31.12.2013
ex3919900051Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not more than 90 μm, whether or not covered on one side with an adhesive layer and a release sheet0 %31.12.2013
ex3920510030
ex3919900055Rolls of biaxially oriented polypropylene film with:a self adhesive coating,a width of 363 mm or more, but not more than 507 mm,a total film thickness of 10 μm or more but not more than 100 μm,for use in the protection of LCD displays during the manufacturing of LCD modules0 %31.12.2012
ex3919900060Reflecting film containing:a poly(vinyl chloride) layer,a polyurethane layer,a glass microspheres layer,a layer whether or not incorporating a security and/or official mark which changes appearance with angle of view,a metallised aluminium layer, andan adhesive, covered on one side with a release liner0 %31.12.2015
ex3919900063Co-extruded trilayer film,each layer containing a mixture of polypropylene and polyethylene,containing not more than 3 % by weight of other polymers,whether or not containing titanium dioxide in the core layer,coated with an acrylic pressure sensitive adhesive, andwith a release liner,of an overall thickness of not more than 110 μm0 %31.12.2015
ex3919900065Self-adhesive film with a thickness of 40 μm or more, but not more than 400 μm, consisting of one or more layers of transparent, metallised or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner0 %31.12.2015
ex3919900070Self-adhesive polishing discs of microporous polyurethane, whether or not coated with a pad0 %31.12.2015
ex3920102510Film of a thickness of not more than 0,20 mm, of a blend of polyethylene and a copolymer of ethylene with oct-1-ene, embossed in a regular rhomboidal pattern, for coating both sides of a layer of unvulcanised rubber0 %31.12.2013
ex3920108920
ex3920102520Film of polyethylene, of a kind used for typewriter ribbon0 %31.12.2013
ex3920102891Poly(ethylene) film of a thickness of 19 μm (± 1), printed with a graphic design which consists of eight different colours on one side of the film, and one colour on the opposite side, the graphic design also has the following characteristics:is repetitive and equally spaced along the length of the filmis equally and visibly aligned when viewed from the back or front of the film0 %31.12.2013
ex3920108930Ethylene vinyl acetate (EVA) film with:a raised relief surface with embossed undulations, anda thickness of more than 0,125 mm0 %31.12.2016
ex3920108940Composite sheet containing an acrylic coating and laminated to a high-density polyethylene layer, of a total thickness of 0,8 mm or more but not more than 1,2 mm0 %31.12.2016
ex3920202130Biaxially oriented polypropylene film with a coextruded layer of polyethylene on one side and a total thickness of 11,5 μm or more but not more than 13,5 μm0 %31.12.2013
ex3920202992Mono-axial oriented film, of a total thickness of not more than 75 μm, consisting of two or three layers, each layer containing a mixture of polypropylene and polyethylene, with a core layer whether or not containing titanium dioxide, having:a tensile strength in the machine direction of 140 MPa or more but not more than 270 MPa, anda tensile strength in the transverse direction of 20 MPa or more but not more than 40 MPa,as determined by test method ASTM D882/ISO 527-30 %31.12.2013
ex3920202993Mono-axial oriented film, consisting of three layers, each layer consisting of a mixture of polypropylene and a copolymer of ethylene and vinyl acetate, having:a thickness of 55 μm or more but not more than 97 μm,a tensile modulus in the machine direction of 0,75 GPa or more but not more than 1,45 GPa, anda tensile modulus in the transverse direction of 0,20 GPa or more but not more than 0,55 GPa0 %31.12.2014
ex3920202994Co-extruded trilayer film,each layer containing a mixture of polypropylene and polyethylene,containing not more than 3 % by weight of other polymers,whether or not containing titanium dioxide in the core layer,of an overall thickness of not more than 70 μm0 %31.12.2016
ex3920208092Laminated sheet or strip, consisting of a film of a thickness of 181 μm or more but not more than 223 μm composed of a blend of a copolymer of propylene with ethylene and a copolymer of styrene-ethylene-butylene-styrene (SEBS) coated or covered on one side with a layer of a copolymer of styrene-ethylene-butylene-styrene (SEBS) and a layer of polyester0 %31.12.2013
ex3920431092Sheeting of poly(vinyl chloride), stabilised against ultraviolet rays, without any holes, even microscopic, of a thickness of 60 μm or more but not more than 80 μm, containing 30 or more but not more than 40 parts of plasticiser to 100 parts of poly(vinyl chloride)0 %31.12.2013
ex3920431094Film of a specular gloss of 70 or more, measured at an angle of 60 ° using a glossmeter (as determined by the ISO 2813:2000 method), consisting of one or two layers of poly(vinyl chloride) coated on both sides with a layer of plastic, of a thickness of 0,26 mm or more but not more than 1,0 mm, covered on the gloss surface with a protective film of polyethylene, in rolls of a width of 1000 mm or more but not more than 1450 mm, for use in the manufacture of goods of heading 94030 %31.12.2013
ex3920491093
ex3920431095Reflecting laminated sheet, consisting of a film of poly(vinyl chloride) and a film of an other plastic totally embossed in a regular pyramidal pattern, covered on one side with a release sheet0 %31.12.2013
ex3920431096Film, of a specular gloss of 70 or more measured at an angle of 60 ° using a glossmeter (as determined by the ISO 2813:2000 method), consisting of a layer of poly(ethylene terephthalate) and a layer of coloured poly(vinyl chloride), for coating panels and doors of a kind used in the manufacture of domestic appliances0 %31.12.2013
ex3920431097Film embossed to a depth of not more than 12 μm, of a specular gloss of 7 or more but not more than 17, measured at an angle of 60 ° using a glossmeter (as determined by the ISO 2813:2000 method), consisting of at least two layers of poly(vinyl chloride), of a total thickness of not more than 0,5 mm, covered on the embossed side with a protective film, in rolls of a width of 1400 mm or more but not more than 1420 mm, for use in the manufacture of goods of heading 94030 %31.12.2013
ex3920510010Poly(methyl methacrylate) plate, with an antistatic coating, of dimensions of 738 mm × 972 mm (± 1,5 mm)0 %31.12.2013
ex3920510020Plate of poly(methyl methacrylate) containing aluminium trihydroxide, of a thickness of 3,5 mm or more but not more than 19 mm0 %31.12.2013
ex3920510040Sheets of polymethylmethacrylate plastic complying with standards EN 4364 (MIL-P-5425E), EN 4365 (MIL-P-8184) and EN 4366 (MIL-PRF-25690)0 %31.12.2013
ex3920599010Non-cellular and non-laminated sheet of modified copolymer of acrylonitrile-methyl acrylate with a thickness of 1,0 mm or more but not more than 1,3 mm, put up in rolls0 %31.12.2016
ex3920599020Reflecting laminated sheet, consisting of an epoxy acrylate layer embossed on one side in a regular shaped pattern, covered on both sides with one or more layers of plastic material0 %31.12.2014
ex3920599030Non-self adhesive reflecting film, consisting of several layers including:a copolymer of acrylic resin,polyurethane,a metalised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use,glass microspheres, anda permanent liner of poly(ethyleneterephthalate)0 %31.12.2016
ex3920621901Coextruded opaque sheet of poly(ethylene terephthalate), of a thickness of 50 μm or more but not more than 350 μm, consisting especially of a layer containing carbon black0 %31.12.2013
ex3920621903
ex3920621907Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25 μm, either:only dyed in the mass, ordyed in the mass and metallised on one side0 %31.12.2013
ex3920621909
ex3920621911Film of poly(ethylene terephthalate) only, of a total thickness of not more than 120 μm, consisting of one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material0 %31.12.2013
ex3920621913
ex3920621917Laminated film of poly(ethylene terephthalate) only, of a total thickness of not more than 120 μm, consisting of one layer which is metallised only and one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material0 %31.12.2013
ex3920621919
ex3920621920Reflecting polyester sheeting embossed in a pyramidal pattern, for the manufacture of safety stickers and badges, safety clothing and accessories thereof, or of school satchels, bags or similar containers0 %31.12.2013
ex3920621921Film of poly(ethylene terephthalate), coated or covered on one side or on both sides with a layer of modified polyester, of a total thickness of 7 μm or more but not more than 11 μm, for the manufacture of video tapes with a magnetic layer of metallic pigments and a width of 8 mm or of 12,7 mm0 %31.12.2013
ex3920621923
ex3920621924Film of poly(ethylene terephthalate) of a thickness of 186 μm or more but not more than 191 μm coated on one side with an acrylic layer in a matrix pattern0 %31.12.2014
ex3920621926
ex3920621937Poly(ethylene terephthalate) film, of a thickness of not more than 12 μm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35 nm0 %31.12.2013
ex3920621939
ex3920621941Poly(ethylene terephthalate) film, of a thickness of 18 μm or more but not more than 25 μm, having:a shrinkage of (3,4 ± 0,1) % in the machine direction (as determined by the ASTM D 1204 method), anda shrinkage of (0,3 ± 0,2) % in the transverse direction (as determined by the ASTM D 1204 method)0 %31.12.2013
ex3920621943
ex3920621947Sheets or rolls of poly(ethylene terephthalate):coated on both sides with a layer of epoxy acrylic resin,of a total thickness of 37 μm (± 3 μm)0 %31.12.2015
ex3920621949
ex3920621951Film of poly(ethylene terephthalate), poly(ethylene naphthalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness of not more than 300 μm and having a surface resistivity of not more than 10000 ohms (per square) (as determined by the ASTM D 257-99 method)0 %31.12.2013
ex3920621953
ex3920621954Matt film of poly(ethylene terephthalate), of a specular gloss of 15 measured at an angle of 45 ° and 18 measured at an angle of 60 ° using a glossmeter (as determined by the ISO 2813:2000 method) and a width of 1600 mm or more0 %31.12.2013
ex3920621956
ex3920621957Film of white poly(ethylene terephthalate), dyed in the mass, of a thickness of 185 μm or more but not more than 253 μm, coated on both sides with an antistatic layer0 %31.12.2013
ex3920621959
ex3920621973Iridescent film of polyester and poly(methyl methacrylate)0 %31.12.2013
ex3920690040
ex3920621975Transparent poly(ethylene terephthalate) film:coated on both sides with layers of organic substances on the basis of acryl of a thickness of 7 nm or more but not more than 80 nm,with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm,with a light transmission of more than 93 %,with a haze value of not more than 1,3 %,with a total thickness of 10 μm or more but not more than 350 μm,with a width of 800 mm or more but not more than 1600 mm0 %31.12.2013
ex3920621977
ex3920621980Poly(ethylene terephtalate) film of a thickness of not more than 20 μm, coated on both sides with a gas barrier layer consisting of a polymeric matrix in which silica has been dispersed and of a thickness of not more than 2 μm0 %31.12.2012
ex3920621982
ex3920690020Film of poly(ethylene naphthalene-2,6-dicarboxylate)0 %31.12.2013
ex3920799010Cellulose acetyl butyrate film, whether or not combined with a polycarbonate layer, of a thickness of not more than 0,81 mm containing a micro-louvre with a typical viewing angle of 30 degrees measured on each side of the surface normal0 %31.12.2012
ex3920910051Poly(vinyl butyral) film containing by weight 25 % or more but not more than 28 % of tri-isobutyl phosphate as a plasticiser0 %31.12.2014
ex3920910052Poly(vinyl butyral) film:containing by weight 26 % or more but not more than 30 % of triethyleneglycol bis(2-ethyl hexanoate) as a plasticiser,with a thickness of 0,73 mm or more but not more than 1,50 mm0 %31.12.2014
ex3920910091Poly(vinyl butyral) film having a graduated coloured band3 %31.12.2013
ex3920910092Plasticised film of polyvinyl butyral, containing by weight:either 14,5 % or more but not more than 17,5 % of dihexyl adipate,or 14,5 % or more but not more than 28,5 % of dibutyl sebacate0 %31.12.2013
ex3920910093Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having the following characteristics:a visible light transmission of 50 % or more,coated on one or both sides with a layer of poly(vinyl butyral) but not coated with an adhesive or any other material except poly(vinyl butyral),a total thickness of not more than 0,2 mm without taking the presence of poly(vinyl butyral) into account,for use in the manufacture of heat-reflecting or decorative laminated glass0 %31.12.2013
ex3920910095Co-extruded trilayer poly(vinyl butyral) film with a graduated colour band containing by weight 29 % or more but not more than 31 % of 2,2′-ethylenedioxydiethyl bis(2-ethylhexanoate) as a plasticiser0 %31.12.2013
ex3920920030Polyamide film of a thickness of not more than 20 μm, coated on both sides with a gas barrier layer which consists of a polymeric matrix in which silica has been dispersed and of a thickness of not more than 2 μm0 %31.12.2012
ex3920992840Polymer film containing the following monomers:poly (tetramethylene ether glycol),bis (4-isocyanotocyclohexyl) methane,1,4-butanediol or 1,3-butanediol,with a thickness of 0,25 mm or more but not more than 5,0 mm,embossed with a regular pattern on one surface,and covered with a release sheet0 %31.12.2013
ex3920992850Thermoplastic polyurethane film, of a thickness of 250 μm or more but not more than 350 μm, covered on one side with a removable protective film0 %31.12.2016
ex3920992860Silicone tape, plate or strip:of a total thickness of 2,5 mm or more, but not more than 8,8 mm,of a total width of 12 mm or more, but not more than 65 mm,for use in the manufacture of products of headings 8521 and 85280 %31.12.2016
ex3920992870Sheets on rolls, consisting of epoxy resin, with conducting properties, containing:microspheres with a coating of metal, whether or not alloyed with gold,an adhesive layer,with a protective layer of silicone or poly(ethylene terephthalate) on one side,with a protective layer of poly(ethylene terephthalate) on the other side, andwith a width of 5 cm or more but not more than 100 cm,with a length of not more than 2000 m0 %31.12.2016
ex3920995925Poly(1-chlorotrifluoroethylene) film0 %31.12.2013
ex3920995950Polytetrafluoroethylene film, non-microporous, in the form of rolls, of a thickness of 0,019 mm or more but not more than 0,14 mm, impermeable to water vapour0 %31.12.2013
ex3920995955Ion-exchange membranes of fluorinated plastic material0 %31.12.2013
ex3920995960Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34 μm or more but not more than 90 μm, a tensile strength at break of 20 MPa or more but not more than 45 MPa and an elongation at break of 250 % or more but not more than 900 %0 %31.12.2013
ex3920999020Anisotropic conductive film, in rolls, of a width of 1,5 mm or more but not more than 3,15 mm and a maximum length of 300 m, used for joining electronic components in the production of LCD or plasma displays0 %31.12.2013
ex3921131010Sheet of polyurethane foam, of a thickness of 3 mm (± 15 %) and of a specific gravity of 0,09435 or more but not more than 0,100920 %31.12.2013
ex3921190091Microporous polypropylene film of a thickness of not more than 100 μm0 %31.12.2013
ex3921190093Strip of microporous polytetrafluoroethylene on a support of a non-woven, for use in the manufacture of filters for kidney dialysis equipment0 %31.12.2013
ex3921190095Film of polyethersulfone, of a thickness of not more than 200 μm0 %31.12.2013
ex3921190096Cellular film, consisting of a layer of polyethylene of a thickness of 90 μm or more but not more than 140 μm and a layer of regenerated cellulose of a thickness of 10 μm or more but not more than 40 μm0 %31.12.2013
ex3921901010Composite plate of poly(ethylene terephthalate) or of poly(butylene terephthalate), reinforced with glass fibres0 %31.12.2013
ex3921901020Poly(ethylene terephthalate) film, laminated on one side or on both sides with a layer of unidirectional non-woven poly(ethylene terephthalate) and impregnated with polyurethane or epoxide resin0 %31.12.2013
ex3921905520Pre-impregnated reinforced fibreglass containing cyanate ester resin or bismaleimide (B) triazine (T) resin mixed with epoxide resin, measuring:469,9 mm (± 2 mm) × 622,3 mm (± 2 mm), or469,9 mm (± 2 mm) × 414,2 mm (± 2 mm), or546,1 mm (± 2 mm) × 622,3 mm (± 2 mm)0 %31.12.2013
ex3921905525Prepreg sheets or rolls containing polyimide resin0 %31.12.2014
ex7019400020
ex3921905530Prepreg sheets or rolls containing brominated epoxy resin reinforced with glass fabric, having:a flow of not more than 3,6 mm (as determined by IPC-TM 650.2.3.17.2), anda glass transition temperature (Tg) of more than 170 °C (as determined by IPC-TM 650.2.4.25)for use in the manufacture of printed circuit boards0 %31.12.2014
ex3921906091Woven polytetrafluoroethylene fabric, coated or covered with a copolymer of tetrafluoroethylene and trifluoroethylene having perfluorinated alkoxy side-chains ending in carboxylic acid or sulphonic acid groups, whether or not in the potassium or sodium salt form0 %31.12.2013
ex5407710020
ex5903909910
ex3921906093Film, of a specular gloss of 30 or more but not more than 60 measured at an angle of 60 ° using a glossmeter (as determined by the ISO 2813:2000 method), consisting of a layer of poly(ethylene terephthalate) and a layer of coloured poly(vinyl chloride), joined by a metallised adhesive coating, for coating panels and doors of a kind used in the manufacture of domestic appliances0 %31.12.2013
ex3923309010Polyethylene container, for compressed hydrogen:with aluminium bosses at both ends,wholly embedded in an overwrap of carbon fibres impregnated with epoxide resin,of a diameter of 213 mm or more, but not more than 368 mm,a length of 860 mm or more, but not more than 1260 mm, anda capacity of 18 litres or more, but not more than 50 litres0 %31.12.2013
ex3926909220Reflecting sheeting or tape, consisting of a facing-strip of poly(vinyl chloride) embossed in a regular pyramidal pattern, heat-sealed in parallel lines or in a grid-pattern to a backing-strip of plastic material, or of knitted or woven fabric covered on one side with plastic material0 %31.12.2013
ex3926909710Microspheres of a polymer of divinylbenzene, of a diameter of 4,5 μm or more but not more than 80 μm0 %31.12.2013
ex3926909715Glass fibre reinforced plastic traverse leaf spring for use in the manufacture of motor vehicle suspension systems0 %31.12.2013
ex3926909725Unexpansible microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate, of a diameter of 3 μm or more but not more than 4,6 μm0 %31.12.2013
ex3926909755Flat product of polyethylene, perforated in opposing directions, of a thickness of 600 μm or more but not more than 1200 μm and of a weight of 21 g/m2 or more but not more than 42 g/m20 %31.12.2013
ex4007000010Siliconated vulcanised rubber thread and cord0 %31.12.2013
ex4016999720Soft rubber sealing stoppers for the manufacture of electrolytic capacitors0 %31.12.2013
ex4016999730Tyre moulding bladder0 %31.12.2016
41051000Sheep or lamb skin leather, without wool on, tanned or retanned but not further prepared, whether or not split, other than leather of heading 41140 %31.12.2013
41053090
41062100Goat or kid skin leather, without hair on, tanned or retanned but not further prepared, whether or not split, other than leather of heading 41140 %31.12.2013
41062290
41063100Leather of other animals, without hair on, not further prepared than tanned, other than leather of heading 41140 %31.12.2013
41063200
41064090
41069200
ex5004001010Silk yarn (other than yarn spun from silk waste) not put up for retail sale, unbleached, scoured or bleached, entirely of silk0 %31.12.2016
ex5005001010Yarn spun entirely from silk waste (noil), not put up for retail sale0 %31.12.2013
ex5005009010
ex5205310010Six ply yarn of bleached cotton, measuring 925 dtex or more but not more than 989 dtex per single yarn, for the manufacture of tampons0 %31.12.2013
52081110Fabrics for the manufacture of bandages, dressings and medical gauzes5,2 %31.12.2013
ex5402450020Yarn of synthetic textile fibres solely of aromatic polyamides obtained by the polycondensation of m-phenylenediamine and isophthalic acid0 %31.12.2013
ex5402470010Synthetic bicomponent filament yarn, not textured, untwisted, measuring 1650 decitex or more but not more than 1800 decitex, consisting of 110 filaments or more but not more than 120 filaments, each having a core of poly(ethylene terephthalate) and a skin of polyamide-6, containing by weight 75 % or more but not more than 77 % of poly(ethylene terephthalate), for use in the manufacture of roofings0 %31.12.2016
ex5402470020Bicomponent monofilament yarn of not more than 30 dtex, consisting of:a poly(ethylene terephthalate) core, andan outer layer of a copolymer of poly(ethyleneterephthalate) and poly(ethyleneisophthalate),for use in the manufacture of filtration fabrics0 %31.12.2015
ex5402490030Yarn of a copolymer of glycollic acid with lactic acid, for the manufacture of surgical sutures0 %31.12.2013
ex5402490050Non-textured filament yarn of poly(vinyl alcohol)0 %31.12.2013
ex5402490070Synthetic filament yarn, single, containing by weight 85 % or more of acrylonitrile, in the form of a wick containing 1000 continuous filaments or more but not more than 25000 continuous filaments, of a weight per metre of 0,12 g or more but not more than 3,75 g and of a length of 100 m or more, for the manufacture of carbon-fibre yarn0 %31.12.2013
ex5404190020Monofilament of poly(1,4-dioxanone)0 %31.12.2013
ex5404190030Unsterilised monofilament of a copolymer of 1,3-dioxan-2-one with 1,4-dioxan-2,5-dione, for the manufacture of surgical sutures0 %31.12.2014
ex5404190050Monofilaments of polyester or poly(butylene terephthalate), with crosssectional dimension of 0,5 mm or more but not more than 1 mm, for use in the manufacture of zippers0 %31.12.2013
ex5404909020Strip of polyimide0 %31.12.2013
ex5407100010Textile fabric, consisting of warp filament yarns of polyamide-6,6 and weft filament yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4′–oxybis (phenyleneamine)0 %31.12.2012
ex5503110010Synthetic staple fibres of a copolymer of terephthalic acid, p-phenylenediamine and 3,4′-oxybis(phenyleneamine), of a length of not more than 7 mm0 %31.12.2013
ex5601300040
ex5503400010Hollow polypropylene staple fibres:measuring 6 decitex or more but not more than 10 decitex,of a strength of 3,5 cN/dtex or more,of a diameter of 30 μm or more,for use in the manufacture of napkins and napkin liners for babies and other sanitary products0 %31.12.2016
ex5503900020Poly(vinyl alcohol) fibres, whether or not acetalised0 %31.12.2013
ex5506900010
ex5601300010
ex5603111010Poly(vinyl alcohol) non-wovens, in the piece or cut into rectangles:of a thickness of 200 μm or more but not more than 280 μm, andof a weight of 20 g/m2 or more but not more than 50 g/m20 %31.12.2013
ex5603119010
ex5603121010
ex5603129010
ex5603911010
ex5603919010
ex5603921010
ex5603929010
ex5603111020Non-wovens, not weighing more than 20 g/m2, containing spunbonded and meltblown filaments put together in a sandwich way with the two outer layers containing fine endless filaments (not less than 10 μm but not more than 20 μm in diameter) and the inner layer containing super-fine endless filaments (not less than 1 μm but not more than 5 μm in diameter), for the manufacture of napkins and napkin liners for babies and similar sanitary napkins0 %31.12.2012
ex5603119020
ex5603129030Non-wovens of aromatic polyamide fibres obtained by polycondensation of m-phenylenediamine and isophthalic acid, in the piece or cut into rectangles0 %31.12.2013
ex5603139030
ex5603149010
ex5603929060
ex5603939040
ex5603949030
ex5603129050Non-woven:weighing 30 g/m2 or more, but not more than 60 g/m2,containing fibres of polypropylene or of polypropylene and polyethylene,whether or not printed, with:on one side, 65 % of the total surface area having circular bobbles of 4 mm in diameter, consisting of anchored, elevated un-bonded curly fibres, suitable for the engagement of extruded hook materials, and the remaining 35 % of the surface area being bonded,and on other side a smooth untextured surface,for use in the manufacture of napkins and napkin liners for babies and similar sanitary articles0 %31.12.2012
ex5603129060Non-woven of spunbonded polyethylene, of a weight of more than 60 g/m2 but not more than 80 g/m2 and an air resistance (Gurley) of 8 s or more but not more than 36 s (as determined by the ISO 5636/5 method)0 %31.12.2013
ex5603139060
ex5603129070Non-wovens of polypropylene:with a melt blown layer, laminated on each side with spun-bonded filaments of polypropylene,with a thickness of not more than 550 μm,with a weight of not more than 150 g/m2,in the piece, or simply cut into squares or rectangles, andnot impregnated0 %31.12.2013
ex5603139070
ex5603929040
ex5603939010
ex5603131010Electrically non-conductive non-wovens, consisting of a central film of poly(ethylene terephthalate) laminated on each side with unidirectionally aligned fibres of poly(ethylene terephthalate), coated on both sides with high grade temperature resistant electrical non-conductive resin, weighing 147 g/m2 or more but not more than 265 g/m2, with non-isotropic tensile strength on both directions, to be used as electrical insulation material0 %31.12.2013
ex5603141010
ex5603131020Non-woven of spunbonded polyethylene, with a coating,of a weight of more than 80 g/m2 but not more than 105 g/m2, andan air resistance (Gurley) of 8 seconds or more but not more than 75 seconds (as determined by the ISO 5636/5 method)0 %31.12.2015
ex5603149030Non-wovens, consisting of a central elastomeric film laminated on each side with spunbonded filaments of polypropylene, of a weight of 200 g/m2 or more but not more than 300 g/m20 %31.12.2013
ex5603929020Non-wovens consisting of a meltblown central layer of a thermoplastic elastomer laminated on each side with spunbonded filaments of polypropylene0 %31.12.2013
ex5603939020
ex5603929070Non-wovens, consisting of multiple layers of a mixture of meltblown fibres and staple fibres of polypropylene and polyester, whether or not laminated on one side or on both sides with spunbonded filaments of polypropylene, of a total thickness of not more than 50 mm0 %31.12.2013
ex5603949040
ex5603929080Non-woven polyolefin fabric, consisting of an elastomeric layer, laminated on each side with polyolefin filaments:of a thickness of not more than 550 μm,a weight of 25 g/m2 or more but not more than 150 g/m2,in the piece or simply cut into squares or rectangles,not impregnated,with cross-directional or machine-directional stretch properties,for use in the manufacture of infant/child care products0 %31.12.2016
ex5603939050
ex5603949020Acrylic fibre rods, having a length of not more than 50 cm, for the manufacture of pen tips0 %31.12.2013
ex5607509010Unsterilised twine of poly(glycolic acid) or of poly(glycolic acid) and its copolymers with lactic acid, plaited or braided, with an inner core, for the manufacture of surgical sutures0 %31.12.2014
ex5803001091Gauze of cotton, of a width of less than 1500 mm0 %31.12.2013
ex5903109010Knitted or woven fabrics, coated or covered on one side with artificial plastic material in which are embedded microspheres0 %31.12.2013
ex5903209010
ex5903909920
ex5906999010Rubberised textile fabric, consisting of warp yarns of polyamide-6,6 and weft yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4′-oxybis(phenyleneamine)0 %31.12.2013
ex5907000010Textile fabrics, coated with adhesive in which are embedded spheres of a diameter of not more than 150 μm0 %31.12.2016
ex5911100010Needle-punched synthetic-fibre felts, not containing polyester, whether or not containing catalytic particles entrapped within the synthetic fibres, coated or covered on one side with polytetrafluoroethylene film, for the manufacture of filtration products0 %31.12.2013
ex5911909030Parts of equipment for the purification of water by reverse osmosis, consisting essentially of plastic-based membranes, supported internally by woven or non-woven textile materials which are wound round a perforated tube, and enclosed in a cylindrical plastic casing of a wall-thickness of not more than 4 mm, whether or not housed in a cylinder of a wall-thickness of 5 mm or more0 %31.12.2013
ex8421990092
ex5911909040Multi-layered non-woven polyester polishing pads, impregnated with polyurethane0 %31.12.2014
ex6805100010Abrasive in the form of identically shaped particles on a support0 %31.12.2013
ex6805200010
ex6805300010
ex6813890010Friction material, of a thickness of less than 20 mm, not mounted, for the manufacture of friction components of a kind used in automatic transmissions and clutches0 %31.12.2013
ex6903909020Silicon carbide reactor tubes and holders, of a kind used for insertion into diffusion and oxidation furnaces for production of semiconductor materials0 %31.12.2013
ex6909190020Silicon nitride (Si3N4) rollers or balls0 %31.12.2015
ex6909190030Supports for catalysts, consisting of porous cordierite or mullite ceramic pieces, of an overall volume of not more than 65 l, having, per cm2 of the cross-section, not less than one continuous channel which may be open at both ends or stopped at one end0 %31.12.2013
ex6909190050Ceramic articles made of continuous filaments of ceramic oxides, containing by weight:2 % or more of diboron trioxide,28 % or less of silicon dioxide, and60 % or more of dialuminium trioxide0 %31.12.2013
ex6914900020
ex6909190060Supports for catalysts, consisting of porous ceramic pieces, of a blend of silicon carbide and silicon, with a hardness of less than 9 on the Mohs scale, with a total volume of not more than 65 litres, having, per cm2 of the surface of the cross section one or more closed channels at the tail end0 %31.12.2013
ex6909190070Supports for catalysts or filters, consisting of porous ceramics made primarily from oxides of aluminium and titanium; with a total volume of not more than 65 litres and at least one duct (open on one or both ends) per cm2 of cross section0 %31.12.2013
ex6909190080Ceramic heat sinks, containing by weight:66 % or more of silicon carbide,15 % or more of aluminium oxide,for maintaining the operating temperature of transistors, diodes and integrated circuits in products of headings 8521 and 85280 %31.12.2016
ex6914900030Ceramic microspheres, transparent, obtained from silicon dioxide and zirconium dioxide, of a diameter of more than 125 μm0 %31.12.2013
ex7002100010Balls of E-glass, of a diameter of 18,5 mm or more but not more than 26 mm0 %31.12.2013
ex7005102510Float glass:of a thickness of 2,0 mm or more but not more than 2,4 mm,coated on one surface with a fluorine doped tin dioxide reflective layer0 %31.12.2012
ex7005103010Float glass:of a thickness of 4,0 mm or more but not more than 4,2 mm,with a light transmission of 91 % or more measured using a D-type light source,coated on one surface with a fluorine doped tin dioxide reflective layer0 %31.12.2012
ex7006009050Glass plate of a diagonal size of 81 cm or more, but not more than 186 cm, provided either with a mesh film or a sputtered conductive layer for EMC shielding and a near-infrared absorbing film, with optional additional anti-reflex/colour enhancement layers on one or both sides0 %31.12.2013
ex7006009060Soda-lime glass plates with:a strain point of more than 570 °C,a thickness of 1,7 mm or more but not more than 2,9 mm,dimensions of 1144 mm (± 0,5 mm) × 670 mm (± 0,5 mm) or 1164 mm (± 0,5 mm) × 649 mm (± 0,5 mm),andwhether or not containing:an indium-tin oxide film, ora grid of electrodes made from silver paste covered by dielectric material0 %31.12.2012
ex8529909246
ex7006009070Float glass:with a thickness of 1,7 mm or more but not more than 1,9 mm,with light transmission of 91 % or more, measured with a D-type light source,coated on one side with fluorine-doped tin dioxide as a reflecting layer,with worked edges0 %31.12.2016
ex7007192010Glass plate of a diagonal size of 81,28 cm (± 1,5 cm) or more, but not more than 185,42 cm (± 1,5 cm), consisting of tempered glass; provided either with a mesh film and a near-infrared absorbing film or a sputtered conductive layer, with optional additional anti-reflex layer on one or both sides, for use in the manufacture of products falling within heading 85280 %31.12.2013
ex7007192020Tempered or semi-tempered glass plate of a diagonal size of 81 cm or more, but not more than 186 cm, with one or more polymer layers, whether or not painted or with coloured or black ceramics around the surrounding edges, for use in the manufacture of goods falling within heading 85280 %31.12.2012
ex7007290010Glass plate of a diagonal size of 81,28 cm (± 1,5 cm) or more, but not more than 185,42 cm (± 1,5 cm), consisting of 2 sandwich plates laminated together; provided either with a mesh film and a near-infrared absorbing film or a sputtered conductive layer, with optional additional anti-reflex layer on one or both sides0 %31.12.2013
ex7009910010Unframed glass mirrors with:a length of 1516 mm (± 1 mm),a width of 553 mm (± 1 mm),a thickness of 3 mm (± 0,1 mm),the back of the mirror covered with protective polyethylene (PE) film, with a thickness of 0,11 mm or more but not more than 0,13 mm,a lead content of not more than 90 mg/kg, anda corrosion resistance of 72 hours or more according to ISO 9227 salt spray test0 %31.12.2015
ex7011100010Glass lenses with a stippled front refractor or with a front refractor composed of prismatic elements, with an external diameter of more than 121 mm but not more than 125 mm0 %31.12.2013
70112000Glass envelopes (including bulbs and tubes), open, and glass parts thereof, without fittings, for cathode ray tubes0 %31.12.2013
ex7014000010Optical elements of glass (other than those of heading 7015), not optically worked, other than signalling glassware0 %31.12.2013
ex7019120001Rovings, measuring 2600 tex or more but not more than 3300 tex and of a loss on ignition of 4 % or more but not more than 8 % by weight (as determined by the ASTM D 2584-94 method)0 %31.12.2013
ex7019120021
ex7019120002Rovings, measuring 650 tex or more but not more than 2500 tex, coated with a layer of polyurethane whether or not mixed with other materials0 %31.12.2013
ex7019120022
ex7019120003Rovings, measuring 392 tex or more but not more than 2884 tex, coated with a layer of an acrylic copolymer0 %31.12.2013
ex7019120023
ex7019120004Rovings, measuring 417 tex or more but not more than 3180 tex, coated with a layer of poly(sodium acrylate) and poly(acrylic acid)0 %31.12.2013
ex7019120024
ex7019191010Yarn of 33 tex or a multiple thereof (± 7,5 %), obtained from continuous spun-glass filaments of a nominal diameter of 3,5 μm or of 4,5 μm, in which filaments of a diameter of 3 μm or more but not more than 5,2 μm predominate, other than those treated so as to improve their adhesion to elastomers0 %31.12.2013
ex7019191020Yarn of 10,3 tex or more but not more than 11,9 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate0 %31.12.2015
ex7019191025Yarn of 5,1 tex or more but not more than 6,0 tex, obtained from continuous glass-spun filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate0 %31.12.2015
ex7019191030Yarn of E-glass of 22 tex (± 1,6 tex), obtained from continuous spun-glass filaments of a nominal diameter of 7 μm, in which filaments of a diameter of 6,35 μm or more but not more than 7,61 μm predominate0 %31.12.2013
ex7019191050Yarn of 11 tex or a multiple thereof (± 7,5 %), obtained from continuous spun-glass filaments, containing 93 percent by weight or more of silicon dioxide, of a nominal diameter of 6 μm or 9 μm, other than those treated0 %31.12.2016
ex7019191055Glass cord impregnated with rubber or plastic, obtained from K or U glass filaments, made up of:9 % or more but not more than 16 % of magnesium oxide,19 % or more but not more than 25 % of aluminium oxide,0 % or more but not more than 2 % of boron oxide,without calcium oxide,coated with a latex comprising at least a resorcinol- formaldehyde resin and chlorosulphonated polyethylene0 %31.12.2014
ex7019191060High modulus glass cord (K) impregnated with rubber, obtained from twisted high modulus glass filament yarns, coated with a latex comprising a resorcinol-formaldehyde resin with or without vinylpyridine and/or hydrogenated acrylonitrile-butadiene rubber (HNBR)0 %31.12.2013
ex7019900030
ex7019191070Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde-vinylpyridine resin and an acrylonitrile-butadiene rubber (NBR)0 %31.12.2013
ex7019900020
ex7019191080Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde resin and chlorosulphonated polyethylene0 %31.12.2013
ex7019900040
ex7019390050Non-woven product of non-textile glass fibre, for the manufacture of air filters or catalysts0 %31.12.2016
ex7019400010Woven fabrics of rovings, impregnated with epoxy resin, with a coefficient of thermal expansion between 30 °C and 120 °C (measured according to IPC-TM-650) of:10 ppm per °C or more but not more than 12 ppm per °C in the length and width, and20 ppm per °C or more but not more than 30 ppm per °C in the thickness, with a glass transition temperature of 152 °C or more but not more than 153 °C (measured according IPC-TM-650)0 %31.12.2013
ex7019900010Non-textile glass fibres in which fibres of a diameter of less than 4,6 μm predominate0 %31.12.2013
ex7201101110Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm0 %31.12.2016
ex7201103010Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm, containing by weight not more than 1 % of silicon0 %31.12.2016
72025000Ferro-silico-chromium0 %31.12.2013
ex7202998010Ferro-dysprosium, containing by weight:78 % or more of dysprosium, and18 % or more but not more than 22 % of iron0 %31.12.2015
ex7320901091Flat spiral spring of tempered steel, with:a thickness of 2,67 mm or more, but not more than 4,11 mm,a width of 12,57 mm or more, but not more than 16,01 mm,a torque of 18,05 Nm or more, but not more than 73,5 Nman angle between the free position and the nominal position in exercise of 76 ° or more, but not more than 218 °for use in the manufacture of tensioners for power transmission belts, for internal combustion engines0 %31.12.2013
ex7325991020Anchor head of hot dipped galvanised ductile cast iron of the kind used in the production of earth anchors0 %31.12.2014
ex7326200020Metal fleece, consisting of a mass of stainless steel wires of diameters of 0,017 mm or more but not more than 0,070 mm, compacted by sintering and rolling0 %31.12.2016
ex7410210010Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with copper foil0 %31.12.2013
ex7410210030Film of polyimide, whether or not containing epoxide resin and/or glass fibre, covered on one side or on both sides with a copper foil0 %31.12.2013
ex7410210040Sheet or platesconsisting of at least a central layer of paper or one central sheet of any type of non-woven fibre, laminated on each side with glass-fibre fabric and impregnated with epoxide resin, orconsisting of multiple layers of paper, impregnated with phenolic resin,coated on one or both sides with a copper film with a maximum thickness of 0,15 mm0 %31.12.2013
ex7410210050Platesconsisting of at least one layer of fibreglass fabric impregnated with epoxide resin,covered on one or both sides with copper foilwith a thickness of not more than 0,15 mm, andwith a dielectric constant (DK) of less than 3,9 and a loss factor (Df) of less than 0,015 at a measuring frequency of 10 GHz, as measured according to IPC-TM-6500 %31.12.2013
ex7419999091Disc (target) with deposition material, consisting of molybdenum silicide:containing 1 mg/kg or less of sodium, andmounted on a copper or aluminium support0 %31.12.2013
ex7616999060
ex7601209910Sheets and billets of secondary aluminium alloy containing lithium0 %31.12.2012
ex7604210010Profiles made of aluminium alloy conforming to EN standard AW-6063 T5anodised,whether or not lacquered,with a wall thickness of 0,5 mm (± 1,2 %) or more but not more than 0,8 mm (± 1,2 %),for use in the manufacture of goods of heading 83020 %31.12.2013
ex7604299030
ex7604291010Sheets and bars of aluminium-lithium alloys0 %31.12.2015
ex7606129920
ex7605190010Not alloyed aluminium wire, of a diameter of 2 mm or more but not more than 6 mm, covered with a layer of copper of a thickness of 0,032 mm or more but not more than 0,117 mm0 %31.12.2013
ex7606129220Aluminium and magnesium alloy strip:in rolls,of a thickness of 0,14 mm or more but not more than 0,40 mm,a width of 12,5 mm or more but not more than 359 mm,a tensile strength of 285 N/mm2 or more, andan elongation at break of 1 % or more, andcontaining by weight:93,3 % or more of aluminium,2,2 % or more but not more than 5 % of magnesium, andnot more than 1,8 % of other elements0 %31.12.2012
ex7607119020
ex7607119010Plain aluminium foil with the following parameters:an aluminium content of 99,98 % or more,a thickness of 0,070 mm or more but not more than 0,125 mm,with a cubic texture,of a kind used for high voltage etching0 %31.12.2016
ex7607119030Laminated aluminium foil with:99 % or more of aluminium,a silica and water glass free hydrophilic coating,a total thickness of not more than 0,120 mm,a tensile strength of 100 N/mm2 or more (as determined by test method ASTM E8), andan elongation at break of 1 % or more0 %31.12.2016
ex7607209010Aluminium laminated film of a total thickness of not more than 0,123 mm, comprising of a layer of aluminium of a thickness of not more than 0,040 mm, polyamide and polypropylene base films, and a protective coating against corrosion by hydrofluoric acid, for use in the manufacture of lithium polymer batteries0 %31.12.2012
ex7607209020Lubricating entry sheet of a total thickness of not more than 350 μm, comprising of:a layer of aluminium foil of a thickness of 70 μm or more but not more than 150 μm,a water soluble lubricant of a thickness of 20 μm or more but not more than 200 μm and solid at room temperature,for use in the manufacture of printed circuit boards0 %31.12.2015
ex7613000020Aluminium container, seamless, for compressed natural gas or compressed hydrogen, wholly embedded in an overwrap of epoxy-carbon fibres composite, of a storage capacity of 172 l (± 10 %) and an unfilled weight of not more than 64 kg0 %31.12.2013
ex7616999015Honeycomb aluminium blocks of the type used in the manufacture of aircraft parts0 %31.12.2013
81041100Unwrought magnesium, containing at least 99,8 % by weight of magnesium0 %31.12.2013
ex8104300010Magnesium powder:of purity by weight of 98 % or more,with a particle size of 0,2 mm or more but not more than 0,8 mm0 %31.12.2015
ex8104900010Ground and polished magnesium sheets, of dimensions not more than 1500 mm × 2000 mm, coated on one side with an epoxy resin insensitive to light0 %31.12.2013
ex8108200010Titanium sponge0 %31.12.2013
ex8108200020Raw ingots from the fusion of titanium and titanium alloys, of a diameter of not more than 380 mm0 %31.12.2013
ex8108200030Titanium powder of which 90 % by weight or more passes through a sieve with an aperture of 0,224 mm0 %31.12.2013
ex8108300010Waste and scrap of titanium and titanium alloys, except those containing by weight 1 % or more but not more than 2 % of aluminium0 %31.12.2013
ex8108903010Titanium alloy rods complying with standard EN 2002-1, EN 4267 or DIN 650400 %31.12.2014
ex8108903020Bars, rods and wire of alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, for use in the manufacture of silencers and exhaust pipes of subheadings 870892 or 871410000 %31.12.2012
ex8108903030Titanium-aluminium-vanadium alloy (TiAl6V4) wire, complying with AMS standards 4928 and 49670 %31.12.2015
ex8108905010Alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, in sheets or rolls, of a thickness of 0,49 mm or more but not more than 3,1 mm, of a width of 1000 mm or more but not more than 1254 mm, for the manufacture of goods of subheading 871410000 %31.12.2013
ex8108905020Alloy of titanium, aluminium and vanadium, containing by weight 2,5 % or more but not more than 3,5 % of aluminium and 2,0 % or more but not more than 3,0 % of vanadium, in sheets or rolls, of a thickness of 0,6 mm or more but not more than 0,9 mm, of a width of not more than 1000 mm, for the manufacture of goods of subheading 871410000 %31.12.2013
ex8108905030Alloy of titanium and silicon, containing by weight 0,15 % or more but not more than 0,60 % of silicon, in sheets or rolls, for use in the manufacture of:exhaust systems for internal combustion engines, ortubes and pipes of subheading 810890600 %31.12.2012
ex8108905040Titanium-alloy sheets for the manufacture of structural parts of aircrafts0 %31.12.2012
ex8108905050Plates, sheets, strips and foils of an alloy of titanium, copper and niobium, containing by weight 0,8 % or more but not more than 1,2 % of copper and 0,4 % or more but not more than 0,6 % of niobium0 %31.12.2012
ex8108905060Plates, sheets, strips and foils of an alloy of titanium, aluminium, silicon and niobium, containing by weight:0,4 % or more but not more than 0,6 % of aluminium,0,35 % or more but not more than 0,55 % of silicon, and0,1 % or more but not more than 0,3 % of niobium0 %31.12.2013
ex8109200010Non-alloy zirconium, in the form of ingots, containing by weight more than 0,01 % of hafnium, for use in the manufacture of tubes for the chemical industry0 %31.12.2013
ex8110100010Antimony in the form of ingots0 %31.12.2013
ex8112993010Alloy of niobium (columbium) and titanium, in the form of bars and rods0 %31.12.2013
ex8113009010Carrier plate of aluminium silicon carbide (AlSiC-9) for electronic circuits0 %31.12.2012
ex8302420080Ratchet disk of a kind used in the manufacture of reclining car seats0 %31.12.2015
ex9401908010
ex8305200010Staples of a width of 12 mm (± 1 mm) and a depth of 8 mm (± 1 mm) for use in copiers and printers0 %31.12.2013
ex8309909010Aluminium can ends with so-called "ring pull" full aperture with a diameter of 136,5 mm (± 1 mm)0 %31.12.2013
ex8401300020Non-irradiated hexagonal fuel modules (elements) for use in nuclear reactors0 %31.12.2013
ex8405900010Metal casing for automobile safety belt pre-tension gas generators0 %31.12.2014
ex8708211010
ex8708219010
ex8407310010Two stroke internal combustion engines, of a cylinder capacity of not more than 30 cm3 for use in the manufacture of portable motorised scooters falling within subheading 871110000 %31.12.2012
ex8407330010Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cm3 and a power of not less than 6 kW but not exceeding 20,0 kW, for the manufacture of:self-propelled lawn mowers, with a seat of subheading 84331151,tractors of subheading 87019011, whose main function is that of a lawn mower,four stroke mowers with motor of a cylinder capacity of not less than 300 cc of subheading 84332010, orsnowploughs and snow blowers of subheading 8430200 %31.12.2012
ex8407908010
ex8407909010
ex8407901010Four-stroke petrol engines of a cylinder capacity of not more than 250 cm3 for use in the manufacture of lawnmowers of subheading 843311, mowers with motor of subheading 84332010, rotovators of subheading 84322950, garden shredders of subheading 84368090 or scarifiers of subheading 843229100 %31.12.2016
ex8407901020Two-stroke internal combustion engines, having a cylinder capacity of not more than 125 cm3, for the manufacture of lawnmowers of subheading 843311 or snowploughs and snow blowers of subheading 8430200 %31.12.2013
ex8407909020Compact Liquid Petroleum Gas (LPG) Engine System, with:6 cylinders,an output of 75 kW or more, but not more than 80 kW,inlet and exhaust valves modified to operate continuously in heavy duty applications,for use in the manufacture of vehicles of heading 84270 %31.12.2015
ex8408904120Diesel engines of a power of not more than 15 kW, with 2 or 3 cylinders, for use in the manufacture of vehicle mounted temperature control systems0 %31.12.2013
ex8408904320Diesel engines of a power of not more than 30 kW, with 4 cylinders, for use in the manufacture of vehicle mounted temperature control systems0 %31.12.2013
ex8409990010Injectors with solenoid valve for optimised atomisation in the engine combustion chamber0 %31.12.2016
ex8479908085
ex8412218050Hydraulic cylinder of a kind used in the manufacture of a wheel loader bucket0 %31.12.2016
ex8413703520Single phase centrifugal pump:discharging at least 400 cm3 fluid per minute,with a noise level limited to 6 dBA,with the inside diameter of the suction opening and discharge outlet of not more than 15 mm, andworking at ambient temperatures down to – 10 °C0 %31.12.2015
ex8414308150Hermetic or semi-hermetic variable-speed electric scroll compressors, with a nominal power rating of 0,5 kW or more but not more than 10 kW, with a displacement volume of not more than 35 cm3, of the type used in refrigeration equipment0 %31.12.2014
ex8414308920Vehicle air conditioning system part, consisting of an open shaft reciprocating compressor of a power of more than 0,4 kW but not more than 10 kW0 %31.12.2013
ex8414592030Axial fan:with an electric motor,of an output of not more than 125 W,for use in the manufacture of computers0 %31.12.2013
ex8414592040Axial fan with an electric motor, of an output of not more than 2 W, for use in the manufacture of products of heading 85280 %31.12.2015
ex8414900020Aluminium pistons, for incorporation into compressors of air conditioning machines of motor vehicles0 %31.12.2014
ex8414900030Pressure-regulating system, for incorporation into compressors of air conditioning machines of motor vehicles0 %31.12.2013
ex8414900040Drive part, for compressors of air conditioning machines of motor vehicles0 %31.12.2013
ex8415900020Evaporator made of aluminium for use in the manufacture of air conditioning machines for automobiles0 %31.12.2016
ex8418991050Evaporator composed of aluminium fins and a copper coil of the kind used in refrigeration equipment0 %31.12.2014
ex8418991060Condenser composed of two concentric copper tubes of the kind used in refrigeration equipment0 %31.12.2014
ex8419899830Apparatus for vapour deposition of parylene for use in the manufacture of drug eluting stents0 %31.12.2012
ex8419899840Solution preparation apparatus for the treatment of materials by a process involving a change of temperature for use in the manufacture of drug-eluting stents0 %31.12.2012
ex8421990091Parts of equipment, for the purification of water by reverse osmosis, consisting of a bundle of hollow fibres of artificial plastic material with permeable walls, embedded in a block of artificial plastic material at one end and passing through a block of artificial plastic material at the other end, whether or not housed in a cylinder0 %31.12.2013
ex8421990093Components of separators for the separation or purification of gases from gas mixtures, consisting of a bundle of permeable hollow fibres enclosed within a container, whether or not perforated, of an overall length of 300 mm or more but not more than 3700 mm and a diameter of not more than 500 mm0 %31.12.2013
ex84223000ex847989971030Machines and apparatus, other than injection moulding machines, for the manufacture of ink-jet printer cartridges0 %31.12.2013
ex8439990010Suction-roll shells, produced by centrifugal casting, not drilled, in the form of alloy-steel tubes, of a length of 3000 mm or more and an external diameter of 550 mm or more0 %31.12.2013
ex8462218010Numerically controlled stent crimping machine comprising a base, a pneumatic crimp head and a motorised product positioning mechanism (V-block) to crimp a stent onto the balloon of a catheter using radial pressure in the manufacture of drug eluting stents0 %31.12.2012
ex8467990010Mechanical switches for connecting electrical circuits, with:a voltage of 14,4 V or more but not more than 42 V,an amperage of 10 A or more but not more than 42 A,for use in the manufacture of machines falling within heading 84670 %31.12.2014
ex8536501135
ex8477598010Machinery for working rubber or plastic for use in the manufacture of drug-eluting stents0 %31.12.2012
ex8477809910Machines for casting or for surface modification of plastic membranes of heading 39210 %31.12.2013
ex8479899740Isobaric pressure exchanger with a flow rate of not more than 50 m3/hr, whether or not with a booster pump0 %31.12.2014
ex8479899750Machinery, being components of a production line for the manufacture of lithium ion batteries for passenger electric motor vehicles, for the construction of such a production line0 %31.12.2015
ex8479908080
ex8481309191Steel check (non-return) valves with:an opening pressure of not more than 800 kPa,an external diameter not more than 37 mm0 %31.12.2014
ex8481805910Air control valve, consisting of a stepping motor and a valve pintle, for the regulation of idle air flow in fuel injection engines0 %31.12.2013
ex8481807920Solenoid valve device that can withstand a pressure of 875 bar0 %31.12.2013
ex8481809950Service valve, consisting a combination of a two way valve on the liquid line and a three way valve on the gas line with:a minimum enclosing pressure of 30 kgf/cm2,a minimum withstanding pressure of 45 kgf/cm2,for use in the manufacture of outdoor air conditioning units0 %31.12.2016
ex8481809960Four way valve, consisting of:a core plunger,a sealing plunger,a 220 V-240 V AC 50/60 Hz solenoid coil,a working pressure up to 4,3 MPa,— a housing for directing the flow of the refrigerant, for use in the manufacture of outdoor air conditioning units0 %31.12.2016
ex8483402950Gear set of cycloid gear type with:a rated torque of 50 Nm or more but not more than 7000 Nm,standard ratios of 1:50 or more but not more than 1:270,lost motion of not more than one arc minute,an efficiency of more than 80 %,of a kind used in robot arms0 %31.12.2016
ex8483405120Gear box, having a differential with wheel axle, for use in the manufacture of self-propelled lawnmowers with a seat of subheading 843311510 %31.12.2013
ex8483405920Hydrostatic speed changer, having a hydro pump and a differential with wheel axle, for use in the manufacture of self-propelled lawnmowers with a seat of subheading 843311510 %31.12.2013
ex8483409080Transmission gearbox, with:not more than 3 gears,an automatic deceleration system, anda power reversal system,for use in the manufacture of goods of heading 84270 %31.12.2015
ex8501109954DC motor, brushless, with an external diameter of not more than 25,4 mm, a rated speed of 2260 (± 15 %) rpm or 5420 (± 15 %) rpm, a supply voltage of 1,5 V or 3 V0 %31.12.2013
ex8501109979DC motor with brushes and an internal rotor with a three-phase winding, whether or not equipped with a worm, of a specified temperature range covering at least – 20 °C to + 70 °C0 %31.12.2013
ex8501109980DC stepping motor, with:an angle of step of 7,5 ° (± 0,5 °),a pull-out torque at 25 °C of 25 mNm or more,a pull-out pulse rate of 1960 pps or more,a two-phase winding, anda rated voltage of 10,5 V or more, but not more than 16,0 V0 %31.12.2013
ex8501109981DC stepping motor, with an angle of step of 18 ° or more, a holding torque of 0,5 mNm or more, a coupling bracket the exterior dimensions of which do not exceed 22 mm × 68 mm, a two phase winding and an output of not more than 5 W0 %31.12.2013
ex8501109982DC motor, brushless, with an external diameter of not more than 29 mm, a rated speed of 1500 (± 15 %) rpm or 6800 (± 15 %) rpm, a supply voltage of 2 V or 8 V0 %31.12.2013
ex8501310030DC motor, brushless, with a three-phase winding, an external diameter of 85 mm or more, but not more than 115 mm, a nominal torque of 2,23 Nm (± 1,0 Nm), of an output of more than 120 W but not more than 520 W, calculated with 1550 rpm (± 350 rpm) at a supply voltage of 12 V equipped with electronic circuit with sensors using the Hall effect, for use with an electric power steering control module (power steering motor)0 %31.12.2016
ex8501310040Permanently excited DC motor with:a multiple-phase winding,an external diameter of 30 mm or more but not more than 80 mm,a rated speed of not more than 15000 rpm,an output of 45 W or more but not more than 300 W, anda supply voltage of 9 V or more but not more than 25 V0 %31.12.2014
ex8501330030Electric drive for motor vehicles, with an output of not more than 315 kW, with:an AC or DC motor with transmission,power electronics connected by cable0 %31.12.2016
ex8501408050
ex8501535010
ex8501510030AC synchronous servo motor with resolver and brake for a maximum speed of not more than 6000 rpm, with:an output of 340 W or more but not more than 7,4 kW,a flange of dimensions of not more than 180 mm × 180 mm, anda length from flange to extreme end of resolver of not more than 271 mm0 %31.12.2016
ex8501522050
ex8503009131Rotor, at the innerside provided with one or two magnetic rings whether or not incorporated in a steel ring0 %31.12.2013
ex8503009932
ex8503009931Stamped collector of an electric motor, having an external diameter of not more than 16 mm0 %31.12.2013
ex8503009933Stator for brushless motor of electrical power steering with a roundness tolerance of 50 μm0 %31.12.2016
ex8503009934Rotor for brushless motor of electrical power steering with a roundness tolerance of 50 μm0 %31.12.2016
ex8503009935Transmitter resolver for brushless motors of electrical power steering0 %31.12.2014
ex8504318020Transformer for use in the manufacture of inverters in LCD modules0 %31.12.2012
ex8504318030Switching transformers, having a power handling capacity of not more than 1 kVA for use in the manufacture of static converters0 %31.12.2013
ex8504409020Direct current to direct current converter0 %31.12.2013
ex8504409030Static converter comprising a power switch with insulated-gate bipolar transistors (IGBTs), contained in a housing, for use in the manufacture of microwave ovens of subheading 851650000 %31.12.2013
ex8504409040Semiconductor power modules comprising:power transistors,integrated circuits,whether or not containing diodes and with or without thermistors,an operating voltage of not more than 600 V,not more than three electrical outputs each containing two power switches (whether MOSFET (Metal Oxide Semiconductor Field-Effect Transistor) or IGBT (Insulated Gate Bi-polar Transistors)) and internal drives, anda rms (root mean square) current rating of not more than 15,7 A0 %31.12.2013
ex8504509520Inductor with an inductance of not more than 62 mH0 %31.12.2013
ex8504509530Multilayer monolithic inductors, contained in a housing of the SMD (surface mounted device) type the exterior dimensions of which do not exceed 1,8 mm × 3,4 mm, for use in the manufacture of products falling within subheadings 85171100, 85171200 or 851769310 %31.12.2013
ex8504509540Coil choke with:an inductance of 4,7 μH (± 20 %),a DC resistance of not more than 0,1 Ohms,an insulation resistance of 100 MOhms or more at 500 V (DC),for use in the manufacture of LCD and LED module power boards0 %31.12.2015
ex8504901110Ferrite cores, other than for deflection yokes0 %31.12.2013
ex8505110031Ferrite magnet having a remanence of 455 mT (± 15 mT)0 %31.12.2013
ex8505110033Magnets consisting of an alloy of neodymium, iron and boron, either in the shape of a rounded rectangle with measurements of not more than 15 mm × 10 mm × 2 mm, or in the shape of a disc with a diameter of not more than 90 mm, whether or not containing a hole in the centre0 %31.12.2013
ex8505199031Neodymium-ferro ring with an external diameter of not more than 13 mm, an internal diameter of not more than 9 mm0 %31.12.2013
ex8505200030Electromagnetic clutch, for use in the manufacture of compressors of air conditioning machines of motor vehicles0 %31.12.2013
ex8505902091Solenoid with a plunger, operating at a nominal supply voltage of 24 V at a nominal DC of 0,08 A, for use in the manufacture of products falling within heading 85170 %31.12.2013
ex8506509010Lithium iodine single cell battery the dimensions of which do not exceed 9 mm × 23 mm × 45 mm and a voltage of not more than 2,8 V0 %31.12.2013
ex8506509020Unit consisting of not more than 2 lithium batteries embedded in a socket for integrated circuits (battery-buffered socket), with not more than 32 connections and incorporating a control circuit0 %31.12.2013
ex8506509030Lithium-iodine or lithium-silver vanadium oxide single cell battery of dimensions of not more than 28 mm × 45 mm × 15 mm and a capacity of not less than 1,05 Ah0 %31.12.2013
ex8507102080Lead acid starter battery, with:a charge acceptance capacity of 200 % or more of the level of an equivalent conventional flooded battery during the first 5 seconds of charge,a liquid electrolyte,for use in the manufacture of passenger cars and light commercial vehicles employing high regenerative alternator controls or start/stop systems with high regenerative alternator controls0 %31.12.2015
ex8507302030Cylindrical nickel-cadmium accumulator, with a length of 65,3 mm (± 1,5 mm) and a diameter of 14,5 mm (± 1 mm), having a nominal capacity of 1000 mAh or more, for use in the manufacture of rechargeable batteries0 %31.12.2013
ex8507500020Rectangular accumulator, with a length of not more than 69 mm, a width of not more than 36 mm and a thickness of not more than 12 mm, for use in the manufacture of rechargeable batteries0 %31.12.2013
ex8507600020
ex8507500030Cylindrical nickel-hydride accumulator, of a diameter of not more than 14,5 mm, for the manufacture of rechargeable batteries0 %31.12.2013
ex8507600030Cylindrical lithium-ion accumulator, with a length of 63 mm or more and a diameter of 17,2 mm or more, having a nominal capacity of 1200 mAh or more, for use in the manufacture of rechargeable batteries0 %31.12.2014
ex8507600060Lithium-ion rechargeable batteries, with:a length of 1213 mm or more, but not more than 1575 mm,a width of 245 mm or more but not more than 1200 mm,a height of 265 mm or more, but not more than 755 mm,a weight of 265 kg or more but not more than 294 kg,a nominal capacity of 66,6 Ah,put up in packs of 48 modules0 %31.12.2015
ex8507600070Rectangular modules for incorporation in lithium-ion rechargeable batteries:of a length of 350 mm or 312 mm,of a width of 79,8 mm or 225 mm,of a height of 168 mm or 35 mm,of a weight of 6,2 kg or 3,95 kg,with a rating of 129 Ah or 66,6 Ah0 %31.12.2015
ex8507600080Rectangular lithium-ion-accumulator, with:a metal casing,a length of 171 mm (± 3 mm),a width of 45,5 mm (± 1 mm),a height of 115 mm (± 1 mm),a nominal voltage of 3,75 V, anda nominal capacity of 50 Ah,for use in the manufacture of rechargeable batteries for motor vehicles0 %31.12.2015
ex8508700010Electronic circuit card without separate housing for actuating and controlling vacuum cleaner brushes powered by not more than 300 W0 %31.12.2015
ex8537109996
ex8508700020Electronic circuit cards that:are connected by wire or radio frequency to each other and the motor controller card, andregulate the functioning (switching on or off and suction capacity) of vacuum cleaners according to a stored program,whether or not fitted with indicators that display the functioning of the vacuum cleaner (suction capacity and/or dust bag full and/or filter full)0 %31.12.2015
ex8537109998
ex8516900060Ventilation sub-assembly of an electric deep-fat fryer:fitted with a motor having a power rating of 8 W at 4600 rpm,governed by an electronic circuit,operating at ambient temperatures above 110 °C,fitted with a thermoregulator0 %31.12.2014
ex8518309520Headphone and earphone for hearing aids, contained in a housing the exterior dimensions of which, excluding connecting points, do not exceed 5 mm × 6 mm × 8 mm0 %31.12.2013
ex8518408091Circuit board sub-assembly, comprising digital audio signal decoding, audio signal processing and amplification with dual and/or multi-channel functionality0 %31.12.2014
ex8518408092Circuit board sub-assembly, comprising power supply, active equaliser and power amplifier circuits0 %31.12.2015
ex8518900091Integrally cold-upsetted steel coreplate, in the form of a disk on one side provided with a cylinder, for use in the manufacture of loudspeakers0 %31.12.2013
ex8519813510Unmounted or incomplete assembly, comprising at least one optical unit and DC motors and operational control circuit, with digital/analogue converter, for use in the manufacture of CD players, radio-broadcast receivers of a kind used in motor vehicles or navigational aid apparatus0 %31.12.2013
ex8521900020Digital video recorder:without a hard disk drive,with or without a DVD-RW drive,with either motion detection or capability of motion detection through IP connectivity via LAN connector,with or without a USB serial port,for use in the manufacture of Closed-circuit television (CCTV) surveillance systems0 %31.12.2014
ex8522904950Electronic assembly for a laser read-head of a compact disc player, comprising:a printed circuit,a photo-detector, in the form of a monolithic integrated circuit, contained in a housing,not more than 3 connectors,not more than 1 transistor,not more than 3 variable and 4 fixed resistors,not more than 5 capacitors,the whole mounted on a support0 %31.12.2013
ex8522904960Printed circuit board assembly comprising:a radio tuner (capable of receiving and decoding radio signals and transmitting those signals within the assembly) without signal processing capabilities,a microprocessor capable of receiving remote control messages and controlling the tuner chipset,for use in the manufacture of home entertainment systems0 %31.12.2014
ex8527990010
ex8529906525
ex8522904965Printed circuit board subassembly, comprising:a radio tuner, capable of receiving and decoding radio signals and transmitting those signals within the assembly, with a signal decoder,a radio frequency (RF) remote control receiver,an infrared remote control signal transmitter,a SCART signal generator,a TV state sensor,for use in the manufacture of home entertainment systems0 %31.12.2014
ex8527990020
ex8529906540
ex8522904970Assembly, comprising at least a flexible printed circuit, a laser driver integrated circuit and a signal converter integrated circuit0 %31.12.2013
ex8522908030Holder, fixing item or internal stiffener of metal, for use in the manufacture of televisions, monitors and video players0 %31.12.2016
ex8529909230
ex8522908065Assembly for optical discs, comprising at least an optical unit and DC motors, whether or not capable of double layer recording0 %31.12.2013
ex8522908070Video tape recording/reproducing assembly comprising at least a motor and a printed circuit board containing integrated circuits with driver or control functions, whether or not incorporating a transformer, for use in the manufacture of products falling within heading 85210 %31.12.2013
ex8522908075Optical reading head for CD player, consisting of one laser diode, one photodetector integrated circuit and one beam splitter0 %31.12.2013
ex8522908080Laser optical drive unit assembly (so called mecha units) for the recording and/or reproduction of digital video and/or audio signals, comprising at least a laser optical reading and/or writing unit, one or more DC motors and not containing a printed circuit board or containing a printed circuit board not capable of signal processing for sounds and images, for use in the manufacture of products falling within headings 8519, 8521, 8526, 8527, 8528 or 85430 %31.12.2013
ex8522908081Laser optical pick up unit for the reproduction of optical signals from CD or DVD and the recording of optical signal on DVD, comprising at least:a laser diode,a laser driver integrated circuit,a photo detector integrated circuit,a front monitor integrated circuit and an actuator,for use in the manufacture of products falling within heading 85210 %31.12.2016
ex8522908083Blu-ray optical pick-up unit, whether or not recordable, for use with Blu-ray, DVD and CD discs, comprising at least:laser diodes operating at three different wavelengths,a photo detector integrated circuit, andan actuator,for the manufacture of products falling within heading 85210 %31.12.2013
ex8522908084Blu-ray drive mechanism, whether or not recordable, for use with Blu-ray, DVD and CD discs, comprising at least:an optical pick up unit with laser diodes operating at three different wavelengths,a spindle motor,a stepping motor0 %31.12.2013
ex8522908085Video head drum, with video heads or with video and audio heads and an electric motor, for use in the manufacture of products falling within heading 85210 %31.12.2013
ex8522908095Drive-unit capable of magnetooptical signal recording and optical signal reproduction, comprising at least an optical unit, DC motors and a printed circuit on which are mounted integrated circuits providing drive and signal processing functions for reading optical discs having an external diameter of not more than 70 mm, not comprising circuits with amplification functions or power supply drive functions0 %31.12.2013
ex8522908096Hard disk drive, for incorporation in products of heading 85210 %31.12.2012
ex8522908097Tuner transforming high-frequency signals into mid-frequency signals, for use in the manufacture of products falling under headings 8521 and 85280 %31.12.2016
ex8529906550
ex8525801920Assembly for television cameras of dimensions of not more than 10 mm × 15 mm × 18 mm, comprising an image sensor, an objective and a colour processor, having an image resolution of not more than 1024 × 1280 pixels, whether or not fitted with cable and/or housing, for the manufacture of goods of subheading 851712000 %31.12.2013
ex8525801925Long wavelength infrared camera (LWIR camera) (according to ISO/TS 16949), with:a sensitivity in the wavelength area of 8 μm or more, but not more than 14 μm,a resolution of 324 × 256 pixels,a weight of not more than 400 g,measurements of not more than 70 mm × 67 mm × 75 mm,a waterproof housing and an automotive-qualified plug, anda deviation of the output signal over the entire work temperature range of not more than 20 %0 %31.12.2014
ex8525801931Closed circuit television (CCTV) camera:of a weight of not more than 5,9 kg,whether or not contained in a housing,of dimensions of not more than 405 mm × 315 mm,with a single Charge-Couple-Device (CCD) or Complementary Metal–Oxide–Semiconductor (CMOS) sensor,with effective pixels of not more than 5 megapixels,for use in CCTV surveillance systems0 %31.12.2013
ex8525809110
ex8525801935Image scanning cameras, using:a "Dynamic overlay lines" system,an output NTSC video signal,a voltage of 6,5 V,an illuminance of 0,5 lux or more0 %31.12.2014
ex8525801940Assembly for cameras used in computer notebooks of dimensions of not more than 15 mm × 25 mm × 25 mm, comprising an image sensor, an objective and a colour processor, having an image resolution of not more than 1600 × 1200 pixels, whether or not fitted with cable and/or housing, whether or not mounted on a base and containing a LED chip0 %31.12.2016
ex8526912080Integrated audio module (IAM) with a digital video output for connection to an LCD touch screen monitor, interfaced over the Media Oriented Systems Transport (MOST) network and transported over the MOST High protocol, with:a printed circuit board (PCB) containing a Global Positioning System (GPS) receiver, a gyroscope, and a Traffic Message Channel (TMC) tuner,a hard disk drive supporting multiple maps,a HD radio,a voice recognition system,a connection to an external CD and DVD drive,Bluetooth, MP3 and USB input connectivity,a voltage of 10 V or more but not more than 16 V,for the use in the manufacture of vehicles in Chapter 870 %31.12.2015
ex8528598010
ex8527919910Assembly consisting of at least:an audio frequency amplifier unit, comprising at least an audio frequency amplifier and a sound generator,a transformer, anda radio broadcast receiver0 %31.12.2014
ex8529906535
ex8528491010Video monitor comprising:a flat screen monochrome cathode-ray tube with a diagonal measurement of the screen of not more than 110 mm and equipped with a deflector yoke, anda printed circuit on which are mounted a deflection unit, a video-amplifier and a transformer,the whole mounted or not on a chassis, for the manufacture of video entry-phones, video telephones or surveillance apparatus0 %31.12.2013
ex8528594020Liquid crystal display colour video monitor having a DC input voltage of 7 V or more but not more than 30 V, with a diagonal measurement of the screen of 33,2 cm or less, suitable for the incorporation into goods of Chapters 84 to 90 and 940 %31.12.2013
ex8529108020Ceramic filter package comprising 2 ceramic filters and 1 ceramic resonator for a frequency of 10,7 MHz (± 30 kHz), contained in a housing0 %31.12.2013
ex8529108035Ceramic filter for a centre frequency of 450 kHz or more but not more than 470 kHz, with a bandwidth of not more than 13 kHz at 3 dB, contained in a housing0 %31.12.2013
ex8529108050Ceramic filter for a centre frequency of 450 kHz (± 1,5 kHz) or 455 kHz (± 1,5 kHz), with a bandwidth of not more than 30 kHz at 6 dB and not more than 70 kHz at 40 dB, contained in a housing0 %31.12.2013
ex8529108060Filters, excluding surface acoustic wave filters, for a centre frequency of 485 MHz or more but not more than 1990 MHz with an insertion loss of not more than 3,5 dB, contained in a housing0 %31.12.2013
ex8529906530Parts of TV-apparatus, having micro-processor and video-processor functions, comprising at least a micro-controller and a video-processor, mounted on a leadframe and contained in a plastic housing0 %31.12.2013
ex8548909044
ex8529906545Satellite radio receiver module transforming satellite high frequency signals to digital audio coded signal, for use in the manufacture of products falling within heading 85270 %31.12.2014
ex8529906555Ambient light LED board to be incorporated in goods of heading 85280 %31.12.2015
ex8529906560Tuner transforming high frequency signals to mid frequency signals for use in the manufacture of satellite or terrestrial TV receivers for set-top boxes0 %31.12.2016
ex8529906565Printed circuit board for distributing supply voltage and control signals directly to a control circuit on a TFT glass panel of a LCD module0 %31.12.2015
ex8529906570Unit driver consisting of an electronic integrated circuit and a flexible printed circuit, for use in the manufacture of LCD modules0 %31.12.2016
ex8529906575Modules comprising at least semiconductor chips for:the generation of driving signals for pixel addressing, ordriving addressing pixels0 %31.12.2012
ex8529906580Scan driver boards for generating electric pulses for scanning to certain electrodes in a glass panel, comprising at least semiconductor chips0 %31.12.2012
ex8529909225LCD modules, not combined with touch screen facilities, solely consisting of:one or more TFT glass or plastic cells,a die cast heat sink,a backlight unit,one printed circuit board with micro controller, andLVDS (Low Voltage Differential Signalling) interface,for use in the manufacture of radios for motor vehicles0 %31.12.2015
ex8529909232Optical unit for video projection, comprising a colour separation system, a positioning mechanism and lenses, for use in the manufacture of products falling within heading 85280 %31.12.2013
ex8529909240Assembly comprising prisms, digital micromirror device (DMD) chips and electronic control circuits, for the manufacture of television projection equipments or video projectors0 %31.12.2013
ex8529909241Digital micromirror device (DMD)-chips, for use in the manufacture of video projectors0 %31.12.2013
ex8529909242Heat sinks and cooling fins of aluminium, for maintaining the operating temperature of transistors and integrated circuits in television sets0 %31.12.2013
ex8529909243Plasma display module incorporating only address and display electrodes, with or without driver and/or control electronics for pixel address only and with or without a power supply0 %31.12.2013
ex8529909244LCD modules, solely consisting of one or more TFT glass or plastic cells, not combined with touch screen facilities, with or without backlight unit, with or without inverters and one or more printed circuit boards with control electronics for pixel addressing only0 %31.12.2013
ex8529909245Integrated circuit package with TV reception functionality containing a channel decoder die, tuner die, power management die, GSM filters and discrete as well as embedded passive circuit elements for reception of digitally broadcasting videosignals of DVB-T and DVB-H formats0 %31.12.2013
ex8529909247Area image sensors ("progressive scan" Interline CCD-Sensor) for digital video cameras in the form of analogue, monolithic integrated circuit with pixels of less than 10 μm × 10 μm and with viewing panel, either polychromic or monochromic, and with a lenslet (micro lens) array with one lenslet mounted on each individual pixel0 %31.12.2014
ex8529909248Aluminium die cast heat sink, for maintaining the operating temperature of transistors and integrated circuits, for use in the manufacture of products falling within heading 85270 %31.12.2014
ex8529909249AC socket with a noise filter, composed of:AC socket (for power cord connection) of 230 V,integrated noise filter composed of capacitors and inductors,cable connector for connecting an AC socket with the PDP (Plasma display panel) power supply unit,whether or not equipped with a metal support, which joins the AC socket to the PDP TV set0 %31.12.2014
ex8536699083
ex8529909250Colour LCD display panel for LCD monitors of heading 8528:with a diagonal measurement of the screen of 14,48 cm or more but not more than 31,24 cm,with background lighting, micro-controller,with a CAN (Controller area network)-controller with LVDS (Low-voltage differential signalling) interface and CAN/power supply socket or with an APIX (Automotive Pixel Link) controller with APIX interface,in a housing with an aluminium heat sink at the back of the housing,without a signal-processing module,for use in the manufacture of vehicles of heading 87030 %31.12.2015
ex8529909760Frame for use in the manufacture of high frequency tuners0 %31.12.2013
ex8531809540Electro-accoustic transducer0 %31.12.2013
ex8535900020Printed circuit board in the form of plates consisting of isolating material with electrical connections and solder points, for use in the manufacture of back light units for LCD modules0 %31.12.2013
ex8535900030Semiconductor module switch in a casing:consisting of an IGBT transistor chip and a diode chip on one or more lead frames,for a voltage of 600 V or 1200 V0 %31.12.2015
ex8536508083
ex8536303011Thermo-electric switch with a cut-off current of 50 A or more, comprising a snap action switch, for direct mounting on an electric motor coil, contained in a hermetically sealed housing0 %31.12.2013
ex8536490091Thermal relays contained in a hermetically sealed glass cartridge of not more than 35 mm in length excluding wires, with a maximum leakage rate of 10-6 cm3 He/sec at one bar in the temperature range 0 °C to 160 °C, to be incorporated into compressors for refrigerating equipment0 %31.12.2013
ex8536501131Switch of the printed circuit mount type, operating at a force of 4,9 N (± 0,9 N), contained in a housing0 %31.12.2013
ex8536501132Mechanical tact switch for connecting electronic circuits, operating at a voltage of not more than 60 V and at a current strength of not more than 50 mA, for use in the manufacture of television sets0 %31.12.2013
ex8536501991Hall effect switch, comprising 1 magnet, 1 Hall effect sensor and 2 capacitors, contained in a housing with 3 connections0 %31.12.2013
ex8536501993Devices, having adjustable controller and switching functions, comprising one ore more monolithic integrated circuits whether or not combined with semiconductor elements, mounted together on a leadframe and contained in a plastic housing0 %31.12.2013
ex8536508097
ex8536508081Mechanical speed governor switches for connecting electrical circuits, with:a voltage of 240 V or more but not more than 250 V,an amperage of 4 A or more but not more than 6 A,for use in the manufacture of machines falling within heading 84670 %31.12.2014
ex8536508082Mechanical switches for connecting electrical circuits, with:a voltage of 240 V or more but not more than 300 V,an amperage of 3 A or more but not more than 15 A,for use in the manufacture of machines falling within heading 84670 %31.12.2014
ex8536508093Switch unit for coaxial cable, comprising 3 electromagnetic switches, with a switching time of not more than 50 ms and an actuating current of not more than 500 mA at a voltage of 12 V0 %31.12.2013
ex8536508095Reed switch having a switching power of 20 W or more within the range of 17 - 43 Ampere-turn, in the form of a glass capsule, not containing mercury, the dimensions of which do not exceed 3 mm × 21 mm, for use in the manufacture of automotive airbag shock-sensors0 %31.12.2013
ex8536508098Mechanical push-button switch for connecting electronic circuits, operating at a voltage of 220 V or more but not more than 250 V and at a current strength of not more than 5 A, for use in the manufacture of television sets0 %31.12.2013
ex8536699081Pitch connector for use in the manufacture of LCD television reception apparatus0 %31.12.2012
ex8536699082Modular jack connector for local area networks, integrating at least:a pulse transformer, including a wide-band ferrite core,a common mode coil,a resistor,a capacitor,for use in the manufacture of products falling within headings 8521 and 85280 %31.12.2014
ex8536699084Universal serial bus (USB) female connector in a single or multiple form for connecting with other USB devices, for use in the manufacture of goods falling within headings 8521 and 85280 %31.12.2015
ex8536699085Jacks, built into a plastic or metal housing, with no more than 8 pins, for use in the manufacture of products falling within headings 8521 and 85280 %31.12.2016
ex8536699086High-Definition Multimedia Interface (HDMI) type connectors, built into a plastic or metal housing, with 19 pins or 20 pins in 2 rows, for use in the manufacture of products falling within headings 8521 and 85280 %31.12.2016
ex8536699087D-subminiature (D-sub) type connectors, built into a plastic or metal housing, with 15 pins in 3 rows, for use in the manufacture of products falling within headings 8521 and 85280 %31.12.2016
ex8536700010Optical female connector, for use in the manufacture of goods falling within headings 8521 and 85280 %31.12.2016
ex8536700020Metal plugs, sockets and connectors in plastic or metal housing for optically and mechanically aligning optical fibre cables:having an operating temperature of – 20 °C or more, but not more than 70 °C,having a signal transmission speed of not more than 25 Mbps,having a supply voltage of – 0,5 V or more, but not more than 7 V,having an input voltage of – 0,5 V or more, but not more than 7,5 V,without an integrated circuit,for use in the manufacture of products of headings 8521 and 85280 %31.12.2016
ex8536908592Metallic stamped frame with connections0 %31.12.2013
ex8536908594Elastomeric connector, of rubber or silicone, consisting of one or more conductor elements0 %31.12.2013
ex8544499310
ex8536908596Keypads, wholly of either silicone or polycarbonate, including printed keys with electrical contacting elements0 %31.12.2015
ex8538909994
ex8543900050
ex8536908597Secure Digital (SD) type memory card slot, push-push or push-pull type, for use in the manufacture of goods falling within headings 8521 and 85280 %31.12.2016
ex8537109992Touch sensitive screen panel, consisting of a conductive grid between two glass or plastic plates or sheets, fitted with electric conductors and connectors0 %31.12.2013
ex8537109993Electronic control units for a voltage of 12 V, for use in the manufacture of vehicle mounted temperature control systems0 %31.12.2013
ex8537109994Unit consisting of two junction field effect transistors contained in a dual lead frame housing0 %31.12.2013
ex8543709020
ex8537109995Unit consisting of two metal oxide semiconductor field effect transistors contained in a dual lead frame housing0 %31.12.2013
ex8543709025
ex8537109997Electronic controller card for actuating and controlling of a single-phase electric AC commutator motor, with an output of 750 W or more and an input power of more than 1600 W but not more than 2700 W0 %31.12.2015
ex8538909992Part of an electrothermal fuse, consisting of a tin coated copper wire attached to a cylindrical casing, the exterior dimensions of which do not exceed 5 mm × 48 mm0 %31.12.2013
ex8539390020Cold cathode (CCFL) or external electrode (EEFL) fluorescent lamps, of a diameter of not more than 5 mm and with a length of more than 120 mm but not more than 1570 mm0 %31.12.2016
ex8540110093Colour cathode-ray tube equipped with electron guns placed side by side (in-line technology), with a diagonal measurement of the screen of 79 cm or more0 %31.12.2016
ex8540110094Colour cathode-ray tube equipped with an electron gun and a deflection yoke, with a screen width/height ratio of 4/3 and a diagonal measurement of the screen of more than 72 cm0 %31.12.2013
ex8540110095Colour cathode-ray tube with a screen width/height ratio of 16/9 and a diagonal measurement of the screen of 39,8 cm (± 0,3 cm)0 %31.12.2013
ex8540208091Photomultiplier consisting of a photocathode tube with 9 diodes or 10 diodes, for light of a wavelength of 160 nm or more but not more than 930 nm, of a diameter of not more than 14 mm and a height of not more than 94 mm0 %31.12.2016
ex8540710020Continuous wave magnetron with a fixed frequency of 2460 MHz, packaged magnet, probe output, for use in the manufacture of products falling within subheading 851650000 %31.12.2013
ex8540890091Displays in the form of a tube consisting of a glass housing mounted on a board the dimensions of which do not exceed 300 mm × 350 mm excluding leads. The tube contains one or more rows of characters or lines arranged in rows, each character or line consisting of fluorescent or phosphorescent elements. These elements are mounted on a metallised base which is covered with fluorescent substances or phosphorescent salts which give off light when bombarded with electrons0 %31.12.2013
ex8540890092Vacuum fluorescent display tube0 %31.12.2013
ex8540910032Electron gun of colour cathode-ray tubes with an anode voltage of 27,5 kV or more but not more than 36 kV0 %31.12.2013
ex8540910040Deflection yoke of cathode-ray tubes0 %31.12.2013
ex8540910050Metal anode button to enable electrical contact with the anode inside the colour picture tube0 %31.12.2013
ex8540910095Slit or slot mask ("shadow mask"), excluding masks with continuously vertical slits, with a diagonal measurement of 697,5 mm or more, but not more than 782,9 mm0 %31.12.2012
ex8540910096Assembly for cathode-ray tubes with 2 or more but not more than 6 coils, a plastic support and a metal fixing ring, for the adjustment of display sharpness and/or convergence0 %31.12.2013
ex8543709030Amplifier, consisting of active and passive elements mounted on a printed circuit, contained in a housing0 %31.12.2013
ex8543709035Radio frequency (RF) modulator, operating with a frequency range of 43 MHz or more but not more than 870 MHz, capable of switching VHF and UHF signals, consisting of active and passive elements mounted on a printed circuit, contained in a housing0 %31.12.2013
ex8543709040High-frequency amplifier comprising one or more integrated circuits and discrete capacitor chips on a metal flange in a housing0 %31.12.2015
ex8543709045Piezo-electric crystal oscillator with a fixed frequency, within a frequency range of 1,8 MHz to 67 MHz, contained in a housing0 %31.12.2013
ex8543709055Opto-electronic circuit comprising one or more light-emitting diodes (LEDs), whether or not equipped with an integrated driving circuit, and one photodiode with amplifier circuit, whether or not with an integrated logic gate arrays circuit or one or more light-emitting diodes and at least 2 photodiodes with an amplifier circuit, whether or not with an integrated logic gate arrays circuit or other integrated circuits, contained in a housing0 %31.12.2013
ex8543709060Oscillator, with a centre frequency of 20 GHz or more but not more than 42 GHz, consisting of active and passive elements not mounted on a substrate, contained in a housing0 %31.12.2013
ex8543709065Audio recording and reproducing circuit, capable of stereo audio data storage and simultaneous record and playback, comprising 2 or 3 monolithic integrated circuits mounted on a printed circuit or a lead frame, contained in a housing0 %31.12.2013
ex8543709080Temperature compensated oscillator, comprising a printed circuit on which are mounted at least a piezo-electric crystal and an adjustable capacitor, contained in a housing0 %31.12.2013
ex8543709085Voltage controlled oscillator (VCO), other than temperature compensated oscillators, consisting of active and passive elements mounted on a printed circuit, contained in a housing0 %31.12.2013
ex8543709090Fuel cell module containing at least polymer electrolyte membrane fuel cells in a housing with an integrated cooling system, for use in the manufacture of motor vehicle propulsion systems0 %31.12.2013
ex8543709095Mobile telephone view and control module comprising of:a mains power/ CAN (Controller area network) output socket,a universal serial bus (USB) and audio IN/OUT ports, andincorporating a video switching device for the interface of smart phone operating systems with the Media Orientated Systems Transport network (MOST),for use in the manufacture of vehicles of Chapter 870 %31.12.2015
ex8543900020Stainless steel cathode in the form of a plate with a hanger bar, whether or not with plastic side strips0 %31.12.2013
ex8543900030Assembly of products falling within heading 8541 or 8542 mounted on a printed circuit, contained in a housing0 %31.12.2013
ex8543900040Part of an electrolysis device, consisting of a pan of nickel equipped with a wire mesh of nickel, fixed via ribs of nickel, and a pan of titanium equipped with a wire mesh of titanium, fixed via ribs of titanium, of which both pans are fixed together back to back0 %31.12.2012
ex8544429010Data transmission cable capable of a bit rate transmission of 600 Mbit/s or more, with:a voltage of 1,25 V (± 0,25 V),connectors fitted at one or both ends, at least one of which contains pins with a pitch of 0,5 mm,outer screening shielding,used solely for communication between LCD or PDP panel and video processing electronic circuits0 %31.12.2013
ex8544499320PET/PVC insulated flexible cable with:a voltage of not more than 60 V,a current of not more than 1 A,a heat resistance of not more than 105 °C,individual wires of a thickness of 0,05 mm (± 0,01 mm) and a width of not more than 0,65 mm (± 0,03 mm),distance between conductors of not more than 0,5 mm, andpitch (distance from centreline to centreline of conductors) of not more than 1,08 mm0 %31.12.2013
ex8545190020Carbon electrodes, for use in the manufacture of zinc-carbon batteries0 %31.12.2013
ex8545909020Carbon fibre paper of a kind used for gas diffusion layers in fuel cell electrodes0 %31.12.2015
ex8547100010Insulated fitting of ceramics, containing by weight 90 % or more of aluminium oxide, metallised, in the form of a hollow cylindrical body of an external diameter of 20 mm or more but not more than 250 mm, for the manufacture of vacuum interrupters0 %31.12.2013
ex8548102910Spent lithium-ion or nickel metal hydride electric accumulators0 %31.12.2016
ex8548909041Unit, consisting of a resonator operating within a frequency range of 1,8 MHz or more but not more than 40 MHz and a capacitor, contained in a housing0 %31.12.2013
ex8548909043Contact image sensor0 %31.12.2013
ex8548909047Unit consisting of two or more light emitting diode chips operating at a typical wavelength of 440 nm or more but not more than 660 nm, contained in a lead frame housing whose exterior dimensions — without fittings — do not exceed 12 mm × 12 mm0 %31.12.2013
ex8548909048Optical unit, consisting at least of a laserdiode and a photodiode operating at a typical wavelength of 635 nm or more but not more than 815 nm0 %31.12.2013
ex8548909049LCD modules, solely consisting of one or more TFT glass or plastic cells, combined with touch screen facilities, with or without backlight unit, with or without inverters and one or more printed circuit boards with control electronics for pixel addressing only0 %31.12.2013
ex8704239120Motor chassis with a self-ignition capacity of at least 8000 cm3, fitted with a cabin on either 3, 4 or 5 wheels having a wheelbase of at least 480 cm, not containing working machinery, to be built into special purpose motor vehicles with a width of at least 300 cm0 %31.12.2012
ex8708309110Drum type parking brake:operating within the service brake disk,with a diameter of 170 mm or more but not more than 175 mm,for use in the manufacture of motor vehicles0 %31.12.2015
ex8708999720Metal housing caps for incorporation into balancing-arms or spherical bearings used in the suspension systems for the front wheels of motor vehicles0 %31.12.2016
ex9001109010Image reverser made up from an assembly of optical fibres0 %31.12.2013
ex9001200010Material consisting of a polarising film, whether or not on rolls, supported on one or both sides by transparent material, whether or not with an adhesive layer, covered on one side or on both sides with a release film0 %31.12.2012
ex9001200020Optical, diffuser, reflector or prism sheets, unprinted diffuser plates, whether or not possessing polarising properties, specifically cut0 %31.12.2013
ex9001900055
ex9001900021Multi-Optical-Path (MOP) film, in rolls, based on poly(ethylene terephthalate) (PET) material:having a total thickness of 100 μm or more, but not more than 240 μm,having a total transmittance of more than 55 % but not more than 65 %, determined by standard method JIS K7105 related to ASTM D1003, andhaze more than 70 % but not more than 80 %, determined by standard method JIS K7105 related to ASTM D10030 %31.12.2014
ex9001900035Rear projection screen, comprising a lenticular plastic plate0 %31.12.2013
ex9001900045Rod of neodymium-doped yttrium-aluminium garnet (YAG) material, polished at both ends0 %31.12.2013
ex9001900060Reflector or diffuser sheets in rolls0 %31.12.2013
ex9001900065Optical film with a minimum of 5 multi-layer structures, including a back side reflector, a front side coating and a contrast filter with a pitch of not more than 0,65 μm, for use in the manufacture of front projection screens0 %31.12.2014
ex9001900070Poly(ethylene terephthalate) film with a thickness of less than 300 μm according to ASTM D2103, having on one side prisms of acrylic resin with a prism angle of 90 ° and a prism pitch of 50 μm0 %31.12.2016
ex9001900075Front filter comprising glass panels with special printing and film coating, for use in the manufacture of plasma display modules0 %31.12.2012
ex9001900076Plasma display panel (PDP) filter0 %31.12.2013
ex9001900085Light guide panel made of poly(methyl methacrylate),whether or not cut,whether or not printed,for use in the manufacture of backlight units for flat screen TVs0 %31.12.2015
ex9002110010Adjustable lens unit, having a focal length of 90 mm or more but not more than 180 mm and comprising a combination of between 4 and 8 glass or methacrylic lenses with a diameter of 120 mm or more but not more than 180 mm, each lens coated on at least one side with a magnesium fluoride layer, for use in the manufacture of video projectors0 %31.12.2013
ex9002110050Lens unit, having a focal length of 25 mm or more but not more than 150 mm, consisting of glass or plastic lenses, with a diameter of 60 mm or more but not more than 190 mm0 %31.12.2013
ex9002200010Filter, consisting of a plastic polarising membrane, a glass plate and a transparent protective film, mounted on a metal frame, for use in the manufacture of products falling within heading 85280 %31.12.2013
ex9002900020Lens, mounted, having a fixed focal length of 3,8 mm (± 0,19 mm) or 8 mm (± 0,4 mm), with a relative aperture of F2.0 and a diameter of not more than 33 mm, for use in the manufacture of charged-coupled (CCD) cameras0 %31.12.2013
ex9002900030Optical unit, comprising 1 or 2 rows of optical glass fibres in the form of lenses and with a diameter of 0,85 mm or more but not more than 1,15 mm, embedded between 2 plastic plates0 %31.12.2013
ex9012909010Energy filters, to be installed on the column of electron microscopes0 %31.12.2016
ex9013200010Carbon dioxide laser, stimulated by high frequency, having an output power of 12 W or more, but not more than 200 W0 %31.12.2013
ex9013200020Laser head assemblies for use in the manufacture of measuring or checking machines for semiconductor wafers or devices0 %31.12.2013
ex9013200030Laser for use in the manufacture of measuring or checking machines for semiconductor wafers or devices0 %31.12.2013
ex9022300010X-ray tube with a target voltage of 4 kV or more but not more than 30 kV, a power of not more than 9 W and a target current of not more than 2 mA0 %31.12.2013
ex9022900010Panels for x-ray apparatus (x-ray flat panel sensors/x-ray sensors) consisting of a glass plate with a matrix of thin-film transistors, covered with a film of amorphous silicon, coated with a scintillator layer of caesium iodide and a metallised protective layer, with an active surface of 409,6 mm2 × 409,6 mm2 and a pixel size of 200 μm2 × 200 μm20 %31.12.2013
ex9027109010Sensor element for gas or smoke analysis in motor vehicles, essentially consisting of a zirconium-ceramic element in a metal housing0 %31.12.2013
ex9031803430Apparatus for measuring the angle and direction of rotation of motor vehicles, consisting of at least one yaw rate sensor in the form of a monocrystalline quartz, whether or not combined with one or more measuring sensors, the whole contained in a housing0 %31.12.2013
ex9031803810Acceleration measurement device for automotive applications, comprising one or more active and/or passive elements and one or more sensors, the whole contained in a housing0 %31.12.2013
ex9031908520Assembly for a laser align sensor, in the form of a printed circuit comprising optical filters and a charge-coupled image (CCD) sensor, the whole contained in a housing0 %31.12.2013
ex9032108920Thermostat, damper or bimetal with,an opening temperature of + 7 °C (± 1,5 °C), closing temperature of – 4 °C (± 1,5 °C)for damper thermostat,an opening temperature of + 8 °C (± 3 °C) for bimetal thermostat,for use in the manufacture of frost free refrigerators0 %31.12.2012
ex9032890020Automotive airbag shock-sensor, comprising a contact capable of switching a current of 12 A at a voltage of 30 V, having a typical contact resistance of 80 mOhm0 %31.12.2013
ex9032890030Electronic controller of electric power steering (EPS controller)0 %31.12.2013
ex9032890040Digital valve controller for controlling liquids and gases0 %31.12.2012
ex9405403510Electric light assembly of synthetic material containing 3 fluorescent tubes (RBG) of a diameter of 3,0 mm (± 0,2 mm), of a length of 420 mm (± 1 mm) or more but not more than 600 mm (± 1 mm), for the manufacture of goods of heading 85280 %31.12.2013
ex9405403910Ambient light module with a length of 300 mm or more but not more than 600 mm, based on a light engine of a series of 3 or more but not more than 9 specific one chip red green and blue light emitting diodes mounted on a PCB, with light coupled to the front and/or back of the Flat TV set0 %31.12.2013
ex9405403920LED array of white silicone, containing:an LED matrix module measuring 38,6 mm × 20,6 mm (± 0,1 mm), equipped with 128 red and green LED chips, anda flexible printed circuit board, equipped with a Negative Temperature Coefficient Thermistor0 %31.12.2013
ex9405403930Electric light assembly containing:printed circuit boards, andLight Emitting Diodes (LED),for the manufacture of backlight units for flat TV sets0 %31.12.2015
ex9503007510Plastic cable car scale models, whether or not with a motor, for printing0 %31.12.2015
ex9503009510
ex9608910010Non-fibrous plastic pen-tips with an internal canal0 %31.12.2013
ex9608910020Felt tips and other porous-tips for markers, without internal canal0 %31.12.2013
ex9612101010Ribbons of plastic with segments of different colours, providing the penetration of dyes by heat into a support (so called dye-sublimation)0 %31.12.2013