| CN code | TARIC | Description | Rate of autonomous duty | Validity period |
|---|
| ex28053090 | 30 | Rare earth metals, scandium and yttrium of a purity by weight of 98,5 % or more | 0 % | 1.1.2011-31.12.2015 |
| ex28255000 | 11 | Copper (I or II) oxide containing by weight 78 % or more of copper and not more than 0,03 % of chloride | 0 % | 1.1.2011-31.12.2015 |
| ex28255000 | 19 | | 0 % | 1.1.2011-31.12.2013 |
| ex29042000 | 10 | Nitromethane | 0 % | 1.1.2011-31.12.2015 |
| ex29042000 | 20 | Nitroethane | 0 % | 1.1.2011-31.12.2015 |
| ex29042000 | 30 | 1-Nitropropane | 0 % | 1.1.2011-31.12.2015 |
| ex29053995 | 10 | Propane-1,3-diol | 0 % | 1.1.2011-31.12.2015 |
| ex29095000 | 20 | Ubiquinol | 0 % | 1.1.2011-31.12.2015 |
| 29124100 | | Vanillin (4-hydroxy-3-methoxybenzaldehyde) | 0 % | 1.1.2011-31.12.2015 |
| ex29142900 | 30 | (R)-p-Mentha-1(6),8-dien-2-one | 0 % | 1.1.2011-31.12.2015 |
| ex29145000 | 20 | 3′-Hydroxyacetophenone | 0 % | 1.1.2011-31.12.2015 |
| ex29147000 | 60 | 4′-tert-Butyl-2′,6′-dimethyl-3′,5′-dinitroacetophenone | 0 % | 1.1.2011-31.12.2015 |
| ex29159000 | 60 | Ethyl-6,8-dichlorooctanoate | 0 % | 1.1.2011-31.12.2015 |
| ex29162000 | 60 | 3-Cyclohexylpropionic acid | 0 % | 1.1.2011-31.12.2015 |
| ex29163900 | 25 | 2-Methyl-3-(4-Fluorophenyl)-propionyl chloride | 0 % | 1.1.2011-31.12.2015 |
| ex29163900 | 30 | 2,4,6-Trimethylbenzoyl chloride | 0 % | 1.1.2011-31.12.2015 |
| ex29171990 | 50 | Tetradecanedioic acid | 0 % | 1.1.2011-31.12.2015 |
| ex29173995 | 20 | Dibutyl-1,4-benzenedicarboxylate | 0 % | 1.1.2011-31.12.2015 |
| ex29173995 | 30 | Benzene-1,2:4,5-tetracarboxylic dianhydride | 0 % | 1.1.2011-31.12.2015 |
| ex29183000 | 50 | Methyl (3-oxo-2-pentylcyclopentyl)acetate | 0 % | 1.1.2011-31.12.2015 |
| ex29212900 | 40 | Decamethylenediamine | 0 % | 1.1.2011-31.12.2015 |
| ex29213099 | 30 | 1,3-Cyclohexanedimethanamine | 0 % | 1.1.2011-31.12.2015 |
| ex29214900 | 70 | 2-Chlorobenzylamine | 0 % | 1.1.2011-31.12.2015 |
| ex29222900 | 75 | 4-(2-Aminoethyl)phenol | 0 % | 1.1.2011-31.12.2015 |
| ex29223900 | 20 | 2-Amino-5-chlorobenzophenone | 0 % | 1.1.2011-31.12.2015 |
| ex29280090 | 25 | Acetaldehyde oxime in an aqueous solution | 0 % | 1.1.2011-31.12.2015 |
| ex29309099 | 50 | [S-(R, R)]-2-Amino-1-[4-(methylthio)-phenyl]-1,3-propanediol | 0 % | 1.1.2011-31.12.2015 |
| ex29310099 | 10 | Diethylmethoxyborane | 0 % | 1.1.2011-31.12.2015 |
| ex29310099 | 15 | Triethylborane | 0 % | 1.1.2011-31.12.2015 |
| ex29321900 | 50 | 2-Methylfuran | 0 % | 1.1.2011-31.12.2015 |
| ex29329900 | 50 | 7-Methyl-3,4-dihydro-2H-1,5-benzodioxepin-3-one | 0 % | 1.1.2011-31.12.2015 |
| ex29329900 | 60 | (3aR,5aS,9aS,9bR)-3a,6,6,9a-Tetramethyl-2,4,5,5a,7,8,9,9b-octahydro-1H-benzo[e][1]benzofuran | 0 % | 1.1.2011-31.12.2015 |
| ex29333999 | 49 | 2-[[[3-Methyl-4-(2,2,2-trifluoroethoxy)-2-pyridinyl]methyl]thio]-1H-benzimidazole | 0 % | 1.1.2011-31.12.2015 |
| ex29333999 | 70 | 2-Chloromethyl-4-methoxy-3,5-dimethylpyridine hydrochloride | 0 % | 1.1.2011-31.12.2015 |
| ex29333999 | 80 | 5-Difluoromethoxy-2-[[(3,4-dimethoxy-2-pyridyl)methyl]thio]-1H-benzimidazole | 0 % | 1.1.2011-31.12.2015 |
| ex29334990 | 30 | Quinoline | 0 % | 1.1.2011-31.12.2015 |
| ex29334990 | 40 | Isoquinoline | 0 % | 1.1.2011-31.12.2015 |
| ex29336980 | 60 | Cyanuric acid | 0 % | 1.1.2011-31.12.2015 |
| ex29337900 | 70 | (S)-N-[(Diethylamino)methyl]-alpha-ethyl-2-oxo-1-pyrrolidineacetamide L-(+)-tartrate | 0 % | 1.1.2011-31.12.2015 |
| ex29342080 | 60 | Benzothiazol-2-yl-(Z)-2-trityloxyimino-2-(2-aminothiazole-4-yl)-thioacetate | 0 % | 1.1.2011-31.12.2015 |
| ex29342080 | 70 | N,N-Bis(1,3-benzothiazol-2-ylsulphanyl)-2-methylpropan-2-amine | 0 % | 1.1.2011-31.12.2015 |
| ex29349990 | 25 | 2,4-Diethyl-9H-thioxanthen-9-one | 0 % | 1.1.2011-31.12.2015 |
| ex29349990 | 40 | 2-Thiophene ethylamine | 0 % | 1.1.2011-31.12.2015 |
| ex29349990 | 50 | 10-[1,1′-Biphenyl]-4-yl-2-(1-methylethyl)-9-oxo-9H-thioxanthenium hexafluorophosphate | 0 % | 1.1.2011-31.12.2015 |
| ex29389030 | 10 | Ammonium glycyrrhizate | 0 % | 1.1.2011-31.12.2015 |
| ex32089019 | 60 | Copolymer of hydroxystyrene with one or more of the following:- styrene,
- alkoxystyrene,
- alkylacrylates,
dissolved in ethyl lactate | 0 % | 1.1.2011-31.12.2011 |
| ex34021190 | 10 | Sodium lauroyl methyl isethionate | 0 % | 1.1.2011-31.12.2015 |
| ex34029010 | 30 | Surface-active preparation, consisting of a mixture of sodium docusate and ethoxylated 2,4,7,9-tetramethyldec-5-yne-4,7-diol | 0 % | 1.1.2011-31.12.2015 |
| ex34029010 | 50 | Surface-active preparation, consisting of a mixture of polysiloxane and poly(ethylene glycol) | 0 % | 1.1.2011-31.12.2015 |
| ex37013000 | 30 | Waterless offset aluminium printing plate: | 0 % | 1.1.2011-31.12.2015 |
| ex84425080 | 10 | —with a plastic coating, |
| —without a printing image, |
| ex37071000 | 15 | Sensitising emulsion consisting of:- by weight not more than 12 % of diazooxonapthtalenesulphonic acid ester,
- phenolic resins,
in a solution containing at least 2-methoxy-1-methylethyl acetate or ethyl lactate or methyl 3-methoxypropionate or 2-heptanone | 0 % | 1.1.2011-31.12.2013 |
| ex37071000 | 35 | Sensitising emulsion or preparation containing one or more of: | 0 % | 1.1.2011-31.12.2011 |
| ex37079090 | 70 | —acrylate polymers, |
| —methacrylate polymers, |
| —derivatives of styrene polymers, |
| containing by weight not more than 7 % of photosensitive acid precursors, dissolved in an organic solvent containing at least 2-methoxy-1-methylethyl acetate |
| ex37079090 | 80 | Anti-reflection coating, consisting of either a siloxane polymer or an organic polymer having a phenolic hydroxy group modified with a chromophore group, in the form of a solution of an organic solvent containing either 1-ethoxy-2-propanol or 2-methoxy-1-methylethyl acetate containing by weight not more than 10 % of polymer | 0 % | 1.1.2011-31.12.2015 |
| ex38089990 | 10 | Oxamyl (ISO) in a solution of cyclohexanone and water | 0 % | 1.1.2011-31.12.2015 |
| ex38123080 | 40 | Mixture of:- 80 % (± 5 %) by weight of 2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate, and,
- 20 % (± 5 %) by weight of 2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate,
| 0 % | 1.1.2011-31.12.2015 |
| ex38249097 | 24 | Solution of (chloromethyl)bis(4-fluorophenyl)methylsilane of a nominal concentration of 65 % in toluene | 0 % | 1.1.2011-31.12.2015 |
| ex38249097 | 27 | Preparation, consisting of a mixture of 2,4,7,9-tetramethyldec-5-yne-4,7-diol and propan-2-ol | 0 % | 1.1.2011-31.12.2015 |
| ex38249097 | 28 | Preparation containing by weight:- 85 % or more but not more than 95 % of α-4-(2-cyano-2-butoxycarbonyl)vinyl-2-methoxy-phenyl-ω-hydroxyhexa(oxyethylene), and,
- 5 % or more but not more than 15 % of polyoxyethylene (20) sorbitan monopalmitate,
| 0 % | 1.1.2011-31.12.2015 |
| ex39021000 | 50 | High isotactic polypropylene (HIPP), whether or not coloured, intended for the manufacture of plastic components for air freshener with the following properties:- a density of 0,880 g/cm3 or more but not more than 0,913 g/cm3 (as determined by test method ASTM D1505),
- a tensile strength at yield of 350 kg/cm2 or more but not more than 390 kg/cm2 (as determined by test method ASTM D638),
- a heat deflection temperature of 135 °C or more under load of 0,45 MPa (as determined by test method ASTM 648),
(1) | 0 % | 1.1.2011-31.12.2015 |
| ex39039090 | 50 | Crystalline copolymer of styrene and p-methylstyrene:- with a melting point of 240 °C or more but not more than 260 °C,
- containing 5 % or more but not more than 15 % by weight of p-methylstyrene,
| 0 % | 1.1.2011-31.12.2015 |
| ex39039090 | 86 | Mixture containing by weight:- 45 % or more but not more than 65 % of polymers of styrene,
- 35 % or more but not more than 45 % of poly(phenylene ether),
- not more than 10 % of other additives,
and with one or more of the following special colour effects:- metallic or pearlescent with a visual angular metamerism caused by at least 0,3 % flake-based pigment,
- fluorescent, as characterized by emitting light during absorption of ultraviolet radiation,
- bright white, as characterized by L not less than 92 and b not more than 2 and a between -5 and 7 on the CIELab colour scale,
| 0 % | 1.1.2011-31.12.2013 |
| ex39046980 | 81 | Poly(vinylidene fluoride) | 0 % | 1.1.2011-31.12.2015 |
| ex39046980 | 93 | Copolymer of ethylene with chlorotrifluoroethylene, in one of the forms mentioned in note 6 (b) to Chapter 39 | 0 % | 1.1.2011-31.12.2013 |
| ex39046980 | 94 | Copolymer of ethylene and tetrafluoroethylene | 0 % | 1.1.2011-31.12.2013 |
| ex39046980 | 96 | Polychlorotrifluoroethylene, in one of the forms mentioned in note 6 (a) and (b) to Chapter 39 | 0 % | 1.1.2011-31.12.2013 |
| ex39046980 | 97 | Copolymer of chlorotrifluoroethylene and vinylidene difluoride | 0 % | 1.1.2011-31.12.2013 |
| ex39059990 | 92 | Polymer of vinylpyrrolidone and dimethylaminoethyl methacrylate, containing by weight 97 % or more but not more than 99 % of vinylpyrrolidone, in the form of a solution in water | 0 % | 1.1.2011-31.12.2013 |
| ex39069090 | 40 | Transparent acrylic polymer in packages of not more than 1 kg, and not for retail sale with:- a viscosity of not more than 50000 Pa.s at 120 °C as determined by the test method ASTM D 3835,
- a weight average molecular weight (Mw) of more than 500000 but not more than 1200000 according to the Gel Permeation Chromatography (GPC) test,
- a residual monomer content of less then 1 %,
| 0 % | 1.1.2011-31.12.2015 |
| ex39072011 | 40 | Polyethylene glycol with an ethylene oxide chain length of not more than 30, having butyl-2-cyano 3-(4-hydroxyphenyl) acrylate end groups, for use as a UV barrier in liquid masterbatches(1) | 0 % | 1.1.2011-31.12.2015 |
| ex39079990 | 30 | Poly(hydroxyalkanoate), predominantly consisting of poly(3-hydroxybutyrate) | 0 % | 1.1.2011-31.12.2015 |
| ex39121100 | 30 | Cellulose triacetate | 0 % | 1.1.2011-31.12.2015 |
| ex39121100 | 40 | Cellulose diacetate powder | 0 % | 1.1.2011-31.12.2015 |
| ex39191080 | 21 | Reflecting sheet, consisting of: | 0 % | 1.1.2011-31.12.2013 |
| ex39199000 | 21 | —a polycarbonate or acrylic polymer film totally embossed on one side in a regular shaped pattern, |
| ex39206100 | 20 | —covered on both sides with one or more layers of plastic material, |
| —whether or not covered on one side with a self-adhesive layer and a release sheet, |
| ex39191080 | 50 | Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 μm or more and an adhesive part of acrylic type of a thickness of 5 μm or more, for use in the grinding and/or dicing process of silicon discs(1) | 0 % | 1.1.2011-31.12.2013 |
| ex39199000 | 41 |
| ex39201089 | 25 |
| ex39191080 | 65 | Self-adhesive reflecting sheet whether or not in segmented pieces: | 0 % | 1.1.2011-31.12.2013 |
| ex39199000 | 57 | —showing a regular pattern, |
| —with or without an application tape layer, |
| —consisting of a film of acrylic polymer followed by a layer of poly(methyl methacrylate) containing microprisms, |
| —whether or not containing an additional layer of polyester and, |
| —an adhesive with a final release sheet, |
| ex39199000 | 35 | Reflecting layered sheet on rolls, with a width of more than 20 cm, showing an embossed regular pattern, consisting of poly(vinyl chloride) film coated on one side with:- a layer of polyurethane containing glass micro beads,
- a layer of poly(ethylene vinyl acetate),
- an adhesive layer, and,
- a release sheet,
| 0 % | 1.1.2011-31.12.2013 |
| ex39199000 | 37 | UV absorbing film of poly(vinyl chloride):- with a thickness of 78 μm or more,
- covered on one side with an adhesive layer and with a release sheet,
- with an adhesive strength of 1764 mN/25 mm or more,
| 0 % | 1.1.2011-31.12.2014 |
| ex39199000 | 60 | Reflecting film containing:- a poly(vinyl chloride) layer,
- a polyurethane layer,
- a glass microspheres layer,
- a layer whether or not incorporating a security and/or official mark which changes appearance with angle of view,
- a metallised aluminium layer, and,
- an adhesive, covered on one side with a release liner,
| 0 % | 1.1.2011-31.12.2015 |
| ex39199000 | 65 | Self-adhesive film with a thickness of 40 μm or more, but not more than 400 μm, consisting of one or more layers of transparent, metallized or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a silicone release liner | 0 % | 1.1.2011-31.12.2015 |
| ex39199000 | 70 | Self-adhesive polishing discs of microporous polyurethane, whether or not coated with a pad | 0 % | 1.1.2011-31.12.2015 |
| ex39202029 | 92 | Mono-axial oriented film, of a total thickness of not more than 75 μm, consisting of two or three layers, each layer containing a mixture of polypropylene and polyethylene, with a core layer whether or not containing titanium dioxide, having:- a tensile strength in the machine direction of 140 MPa or more but not more than 270 MPa and,
- a tensile strength in the transverse direction of 20 MPa or more but not more than 40 MPa,
as determined by test method ASTM D882/ISO 527-3 | 0 % | 1.1.2011-31.12.2013 |
| ex39206219 | 47 | Sheets or rolls of poly(ethylene terephthalate): | 0 % | 1.1.2011-31.12.2015 |
| ex39206219 | 49 | —coated on both sides with a layer of epoxy acrylic resin, |
| —of a total thickness of 37 μm (± 3 μm), |
| 41063100410632004106409041069200 | | Leather of other animals, without hair on, not further prepared than tanned, other than leather of heading No 4114 | 0 % | 1.1.2011-31.12.2013 |
| ex54024700 | 20 | Bicomponent monofilament yarn of not more than 30 dtex, consisting of:- a polyethylene terephthalate core, and,
- an outer layer of a copolymer of polyethylene terephthalate and polyethylene isophthalate,
for use in the manufacture of filtration fabrics(1) | 0 % | 1.1.2011-31.12.2015 |
| ex56031290 | 70 | Non-wovens of polypropylene: | 0 % | 1.1.2011-31.12.2013 |
| ex56031390 | 70 | —with a melt blown layer, laminated on each side with spun-bonded filaments of polypropylene, |
| ex56039290 | 40 | —with a thickness of not more than 550 μm, |
| ex56039390 | 10 | —with a weight of not more than 150 g/m2, |
| —in the piece, or simply cut into squares or rectangles, and, |
| —not impregnated, |
| ex68051000 | 10 | Abrasive in the form of identically shaped particles on a support | 0 % | 1.1.2011-31.12.2013 |
| ex68052000 | 10 |
| ex68053000 | 10 |
| ex69091900 | 20 | Silicon nitride (Si3N4) rollers or balls | 0 % | 1.1.2011-31.12.2015 |
| ex69091900 | 50 | Ceramic articles made of continuous filaments of ceramic oxides, containing by weight: | 0 % | 1.1.2011-31.12.2013 |
| ex69149000 | 20 | —2 % or more of diboron trioxide, |
| —28 % or less of silicon dioxide and, |
| —60 % or more of dialuminium trioxide, |
| ex69149000 | 30 | Ceramic microspheres, transparent, obtained from silicon dioxide and zirconium dioxide, of a diameter of more than 125 μm | 0 % | 1.1.2011-31.12.2013 |
| ex70191200 | 01 | Rovings, measuring 2600 tex or more but not more than 3300 tex and of a loss on ignition of 4 % or more but not more than 8 % by weight (as determined by the ASTM D 2584-94 method) | 0 % | 1.1.2011-31.12.2013 |
| ex70191200 | 21 |
| ex70191200 | 02 | Rovings, measuring 650 tex or more but not more than 2500 tex, coated with a layer of polyurethane whether or not mixed with other materials | 0 % | 1.1.2011-31.12.2013 |
| ex70191200 | 22 |
| ex70191200 | 03 | Rovings, measuring 392 tex or more but not more than 2884 tex, coated with a layer of an acrylic copolymer | 0 % | 1.1.2011-31.12.2013 |
| ex70191200 | 23 |
| ex70191200 | 04 | Rovings, measuring 417 tex or more but not more than 3180 tex, coated with a layer of poly(sodium acrylate) and poly(acrylic acid) | 0 % | 1.1.2011-31.12.2013 |
| ex70191200 | 24 |
| ex70191910 | 41 | Yarn of 33 tex or a multiple thereof (± 7,5 %), obtained from continuous spun-glass filaments of a nominal diameter of 3,5 μm or of 4,5 μm, in which filaments of a diameter of 3 μm or more but not more than 5,2 μm predominate, other than those treated so as to improve their adhesion to elastomers | 0 % | 1.1.2011-31.12.2013 |
| ex70191910 | 61 |
| ex70191910 | 42 | Yarn of E-glass of 22 tex (± 1,6 tex), obtained from continuous spun-glass filaments of a nominal diameter of 7 μm, in which filaments of a diameter of 6,35 μm or more but not more than 7,61 μm predominate | 0 % | 1.1.2011-31.12.2013 |
| ex70191910 | 62 |
| ex70191910 | 43 | High modulus glass cord (K) impregnated with rubber, obtained from twisted high modulus glass filament yarns, coated with a latex comprising a resorcinol-formaldehyde resin with or without vinylpyridine and/or hydrogenated acrylonitrile-butadiene rubber (HNBR) | 0 % | 1.1.2011-31.12.2013 |
| ex70191910 | 63 |
| ex70199099 | 30 |
| ex70191910 | 44 | Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde-vinylpyridine resin and an acrylonitrile-butadiene rubber (NBR) | 0 % | 1.1.2011-31.12.2013 |
| ex70191910 | 64 |
| ex70199099 | 20 |
| ex70191910 | 45 | Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde resin and chlorosulphonated polyethylene | 0 % | 1.1.2011-31.12.2013 |
| ex70191910 | 65 |
| ex70199099 | 10 |
| ex70191910 | 46 | Glass cord impregnated with rubber or plastic, obtained from K or U glass filaments, made up of: | 0 % | 1.1.2011-31.12.2014 |
| ex70191910 | 66 | —9 % or more but not more than 16 % of magnesium oxide, |
| —19 % or more but not more than 25 % of aluminium oxide, |
| —0 % or more but not more than 2 % of boron oxide, |
| —without calcium oxide, |
| coated with a latex comprising at least a resorcinol- formaldehyde resin and chlorosulphonated polyethylene |
| ex72029980 | 10 | Ferro-dysprosium, containing by weight:- 78 % or more of dysprosium and,
- 18 % or more but no more than 22 % of iron,
| 0 % | 1.1.2011-31.12.2015 |
| ex76061292 | 20 | Strip of an alloy of aluminium and magnesium, containing by weight: | 0 % | 1.1.2011-31.12.2012 |
| ex76071190 | 20 | —93,3 % or more of aluminium, |
| —2,2 % or more but not more than 5 % of magnesium, and, |
| —not more than 1,8 % of other elements, |
| in rolls, of a thickness of 0,14 mm or more but not more than 0,40 mm and a width of 12,5 mm or more but not more than 89 mm, with a tensile strength of 285 N/mm2 or more and an elongation at break of 1,0 % or more |
| ex76072090 | 10 | Aluminium laminated film of a total thickness of not more than 0,123 mm, comprising of a layer of aluminium of a thickness of not more than 0,040 mm, polyamide and polypropylene base films, and a protective coating against corrosion by hydrofluoric acid, for use in the manufacture of lithium polymer batteries (1) | 0 % | 1.1.2011-31.12.2012 |
| ex81089030 | 30 | Titanium-aluminium-vanadium alloy (TiAl6V4) wire, complying with AMS standards 4928 and 4967 | 0 % | 1.1.2011-31.12.2015 |
| ex84137035 | 20 | Single phase centrifugal pump:- discharging at least 400 cm3 fluid per minute,
- with a noise level limited to 6 dBA,
- with the inside diameter of the suction opening and discharge outlet of not more than 15 mm, and,
- working at ambient temperatures down to – 10 °C,
| 0 % | 1.1.2011-31.12.2015 |
| ex84145920 | 40 | Axial fan with an electric motor, of an output of not more than 2 W, for use in the manufacture of products of heading 8528 (1) | 0 % | 1.1.2011-31.12.2015 |
| ex85013300 | 30 | Electric drive for motor vehicles, with an output of not more than 100 kW, with:- a DC motor with transmission,
- power electronics connected by cable,
| 0 % | 1.1.2011-31.12.2015 |
| ex85045095 | 40 | Coil choke with:- an inductance of 4,7 μΗ (± 20 %),
- a DC resistance of not more than 0,1 Ohms,
- an insulation resistance of 100 MOhms or more at 500 V (DC),
for use in the manufacture of LCD and LED module power boards(1) | 0 % | 1.1.2011-31.12.2015 |
| ex85059020 | 91 | Solenoid with a plunger, operating at a nominal supply voltage of 24 V at a nominal DC of 0,08 A, for use in the manufacture of products falling within heading No 8517 (1) | 0 % | 1.1.2011-31.12.2013 |
| ex85078030 | 60 | Lithium-ion rechargeable batteries:- of a length of 1213 mm,
- of a width of 245 mm,
- of a height of 755 mm,
- of a weight of 265 kg,
- with a nominal capacity of 66,6 Ah,
- put up in packs of 48 modules,
| 0 % | 1.1.2011-31.12.2015 |
| ex85078030 | 70 | Rectangular modules for incorporation in lithium-ion rechargeable batteries:- of a length of 350 mm or 312 mm,
- of a width of 79,8 mm or 225 mm,
- of a height of 168 mm or 35 mm,
- of a weight of 6,2 kg or 3,95 kg,
- with a rating of 129 Ah or 66,6 Ah,
| 0 % | 1.1.2011-31.12.2015 |
| ex85078030 | 80 | Rectangular lithium-ion-accumulator, with- a metal casing,
- a length of 171 mm (± 3 mm),
- a width of 45,5 mm (± 1 mm),
- a height of 115 mm (± 1 mm),
- a nominal voltage of 3,75 V and,
- a nominal capacity of 50 Ah,
for use in the manufacture of rechargeable batteries for motor vehicles(1) | 0 % | 1.1.2011-31.12.2015 |
| ex85184080 | 91 | Circuit board sub-assembly, comprising digital audio signal decoding, audio signal processing and amplification with dual and/or multi-channel functionality | 0 % | 1.1.2011-31.12.2014 |
| ex85184080 | 92 | Circuit board sub-assembly, comprising power supply, active equalizer and power amplifier circuits | 0 % | 1.1.2011-31.12.2015 |
| ex85219000 | 20 | Digital video recorder:- without a hard disk drive,
- with or without a DVD-RW,
- with either motion detection or capability of motion detection through IP connectivity via LAN connector,
- with or without a USB serial port,
for use in the manufacture of Closed-circuit television (CCTV) surveillance systems(1) | 0 % | 1.1.2011-31.12.2014 |
| ex85229080 | 84 | Blu-ray drive mechanism, whether or not recordable, for use with Blu-ray, DVD and CD discs, comprising at least:- an optical pick up unit with laser diodes operating at three different wavelengths,
- a spindle motor,
- a stepping motor,
| 0 % | 1.1.2011-31.12.2013 |
| ex85258019 | 31 | Closed circuit television (CCTV) cameras, whether or not contained in a housing, with:- a weight of not more than 960 g,
- either a single sensor Charge-Couple Device (CCD) or a Complementary Metal–Oxide–Semiconductor (CMOS) sensor,
- of not more than 440000 effective pixels,
| 0 % | 1.1.2011-31.12.2013 |
| ex85285940 | 20 | Liquid crystal display colour video monitor having a DC input voltage of 7 V or more but not more than 30 V, with a diagonal measurement of the screen of 33,2 cm or less, suitable for the incorporation into goods of chapters 84 to 90 and 94 | 0 % | 1.1.2011-31.12.2013 |
| ex85299065 | 55 | Ambient light LED board to be incorporated in goods of heading 8528 (1) | 0 % | 1.1.2011-31.12.2015 |
| ex85299065 | 65 | Printed circuit board for distributing supply voltage and control signals directly to a control circuit on a TFT glass panel of a LCD module | 0 % | 1.1.2011-31.12.2015 |
| ex85299065 | 75 | Modules comprising at least semiconductor chips for:- the generation of driving signals for pixel addressing, or,
- driving addressing pixels,
| 0 % | 1.1.2011-31.12.2012 |
| ex85299092 | 25 | LCD modules, not combined with touch screen facilities, solely consisting of:- one or more TFT glass or plastic cells,
- a die cast heat sink,
- a backlight unit,
- one printed circuit board with micro controller, and,
- LVDS (Low Voltage Differential Signalling) interface,
for use in the manufacture of radios for motor vehicles(1) | 0 % | 1.1.2011-31.12.2015 |
| ex85359000 | 30 | Semiconductor module switch in a casing: | 0 % | 1.1.2011-31.12.2015 |
| ex85365080 | 83 | —consisting of an IGBT transistor chip and a diode chip on one or more lead frames, |
| —for a voltage of 600 V or 1200 V, |
| ex85401100 | 91 | Colour cathode-ray tube with a slot mask, equipped with an electron gun and a deflection yoke and with a screen width/height ratio of 4/3 and a diagonal measurement of the screen of not more than 42 cm | 0 % | 1.1.2011-31.12.2011 |
| ex85401100 | 92 | Full square curved screen colour cathode-ray tube, equipped with an electron gun and a deflection yoke and with a screen width/height ratio of 4/3 and a diagonal measurement of the screen of 68 cm (± 2 mm) | 0 % | 1.1.2011-31.12.2011 |
| ex85401100 | 93 | Colour cathode-ray tube equipped with electron guns placed side by side (in-line technology), with a diagonal measurement of the screen of 79 cm or more | 0 % | 1.1.2011-31.12.2011 |
| ex85401100 | 94 | Colour cathode-ray tube equipped with an electron gun and a deflection yoke, with a screen width/height ratio of 4/3 and a diagonal measurement of the screen of more than 72 cm | 0 % | 1.1.2011-31.12.2013 |
| ex85401100 | 95 | Colour cathode-ray tube with a screen width/height ratio of 16/9 and a diagonal measurement of the screen of 39,8 cm (± 0,3 cm) | 0 % | 1.1.2011-31.12.2013 |
| ex85437090 | 40 | High-frequency amplifier comprising one or more integrated circuits and discrete capacitor chips on a metal flange in a housing | 0 % | 1.1.2011-31.12.2015 |
| ex85444290 | 10 | Data transmission cable capable of a bit rate transmission of 600 Mbit/s or more, with:- a voltage of 1,25 V (± 0,25 V),
- connectors fitted at one or both ends, at least one of which contains pins with a pitch of 0,5 mm,
- outer screening shielding,
used solely for communication between LCD or PDP panel and video processing electronic circuits | 0 % | 1.1.2011-31.12.2013 |
| ex85451900 | 20 | Carbon electrodes, for use in the manufacture of zinc-carbon batteries (1) | 0 % | 1.1.2011-31.12.2013 |
| ex85471000 | 10 | Insulated fitting of ceramics, containing by weight 90 % or more of aluminium oxide, metallised, in the form of a hollow cylindrical body of an external diameter of 20 mm or more but not more than 250 mm, for the manufacture of vacuum interrupters (1) | 0 % | 1.1.2011-31.12.2013 |
| ex90019000 | 85 | Light guide panel made of poly(methyl methacrylate),- whether or not cut,
- whether or not printed,
for use in the manufacture of backlight units for flat screen TVs(1) | 0 % | 1.1.2011-31.12.2015 |
| ex90229000 | 10 | Panels for x-ray apparatus (x-ray flat panel sensors/x-ray sensors) consisting of a glass plate with a matrix of thin-film transistors, covered with a film of amorphous silicon, coated with a scintillator layer of caesium iodide and a metallised protective layer, with an active surface of 409,6 mm2 × 409,6 mm2 and a pixel size of 200 μm2 × 200 μm2 | 0 % | 1.1.2011-31.12.2013 |
| ex94054039 | 30 | Electric light assembly containing:- printed circuit boards and,
- Light Emitting Diodes (LED),
for the manufacture of backlight units for flat TV sets(1) | 0 % | 1.1.2011-31.12.2015 |
| ex95030075 | 10 | Plastic cable car scale models, whether or not with a motor, for printing (1) | 0 % | 1.1.2011-31.12.2015 |
| ex95030095 | 10 |