Commission Regulation (EC) No 1275/2008 of 17 December 2008 implementing Directive 2005/32/EC of the European Parliament and of the Council with regard to ecodesign requirements for standby and off mode electric power consumption of electrical and electronic household and office equipment (Text with EEA relevance)
Modified by
Commission Regulation (EC) No 278/2009of 6 April 2009implementing Directive 2005/32/EC of the European Parliament and of the Council with regard to ecodesign requirements for no-load condition electric power consumption and average active efficiency of external power supplies(Text with EEA relevance), 32009R0278, April 7, 2009
Commission Regulation (EC) No 642/2009of 22 July 2009implementing Directive 2005/32/EC of the European Parliament and of the Council with regard to ecodesign requirements for televisions(Text with EEA relevance), 32009R0642, July 23, 2009
Commission Regulation (EU) No 617/2013of 26 June 2013implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for computers and computer servers(Text with EEA relevance), 32013R0617, June 27, 2013
Commission Regulation (EC) No 1275/2008of 17 December 2008implementing Directive 2005/32/EC of the European Parliament and of the Council with regard to ecodesign requirements for standby and off mode electric power consumption of electrical and electronic household and office equipment(Text with EEA relevance)THE COMMISSION OF THE EUROPEAN COMMUNITIES,Having regard to the Treaty establishing the European Community,Having regard to Directive 2005/32/EC of the European Parliament and of the Council of 6 July 2005 establishing a framework for the setting of ecodesign requirements for energy-using products and amending Council Directive 92/42/EEC and Directives 96/57/EC and 2000/55/EC of the European Parliament and of the CouncilOJ L 191, 22.7.2005, p. 29., and in particular Article 15(1) thereof,After consulting the Ecodesign Consultation Forum,Whereas:(1)Under Directive 2005/32/EC ecodesign requirements shall be set by the Commission for energy-using products representing significant volumes of sales and trade, having significant environmental impact and presenting significant potential for improvement in terms of their environmental impact without entailing excessive costs.(2)Article 16(2) second indent of Directive 2005/32/EC provides that in accordance with the procedure referred to in Article 19(3) and the criteria set out in Article 15(2), and after consulting the Consultation Forum, the Commission shall as appropriate introduce a separate implementing measure reducing standby losses for a group of products.(3)The Commission has carried out a preparatory study which analysed the technical, environmental and economic aspects of standby mode and off-mode losses. The study has been developed together with stakeholders and interested parties from the EU and third countries, and the results have been made publicly available.(4)It has been stated in the preparatory study that standby functionalities and off-mode losses occur for the majority of electrical and electronic household and office equipment products sold in the Community, while the annual electricity consumption related to standby functionalities and off-mode losses in the Community has been estimated to be 47 TWh in 2005, corresponding to 19 Mt CO2 emissions. Without taking specific measures, the consumption is predicted to increase to 49 TWh in 2020. It has been concluded that the electricity consumption of standby functionalities and off-mode losses can be significantly reduced.(5)Improvements of electricity consumption of standby functionalities and off-mode losses should be achieved by applying existing non-proprietary cost-effective technologies, which lead to a reduction of the combined expenses for purchasing and operating equipment.(6)Ecodesign requirements for the power consumption of standby mode and off mode of electrical and electronic household and office equipment should be set with a view to harmonising ecodesign requirements on standby mode and off mode throughout the Community and contributing to the functioning of the internal market and to improvement of the environmental performance of the products affected.(7)The ecodesign requirements should not have negative impact on the functionality of the product and should not affect negatively health, safety and environment. In particular, the benefits of reducing the electricity consumption during the use phase should over-compensate potential additional environmental impacts during the production phase of equipment having standby functionalities and/or off-mode losses.(8)The application of this Regulation should be limited to products corresponding to household and office equipment intended for use in the domestic environment, which, for information technology equipment, corresponds to class B equipment as set out in EN 55022:2006. The scope should be defined such that equipment that is not yet available on the market, but have similar functionalities to those products explicitly named in this Regulation, are designed to fulfil the requirements. When appropriate, an amendment to this Regulation can complement the list of products.(9)Operating modes not covered by this Regulation, such as the ACPI S3 mode of computers, should be considered in product-specific implementing measures pursuant to Directive 2005/32/EC.(10)As a general rule, requirements on standby and off mode set out in product-specific implementing measures pursuant to Directive 2005/32/EC should not be less ambitious than those set out in this Regulation.(11)In order to prevent unnecessary losses of energy, products should ideally enter into a "0-Watt" consumption state when providing no function. The technical feasibility and appropriateness should be considered on a product-by-product basis in the relevant implementing measure pursuant to Directive 2005/32/EC.(12)The two-staged entry into force of the ecodesign requirements should provide an appropriate time-frame for manufacturers to redesign products as far as standby functionalities and off-mode losses are concerned. The timing of the stages should be set in such a way that negative impacts related to functionalities of equipment on the market are avoided, and cost impacts for manufacturers, in particular SMEs, are taken into account, while ensuring timely achievement of policy objectives. Measurements of the power consumption should be performed taking into account the generally recognised state of the art; manufacturers may apply harmonised standards in accordance with Article 9 of Directive 2005/32/EC.(13)This Regulation should increase the market penetration of technologies yielding improved energy efficiency for standby functionalities and off-mode losses, leading to estimated energy savings of 35 TWh in 2020, compared to a business-as-usual scenario.(14)Pursuant to Article 8(2) of Directive 2005/32/EC, this Regulation should specify that the applicable conformity assessment procedures are the internal design control set out in Annex IV and the management system set out in Annex V to Directive 2005/32/EC.(15)In order to facilitate compliance checks, manufacturers should be requested to provide information in the technical documentation referred to in Annexes IV and V to Directive 2005/32/EC on the operating conditions subject to the definitions of standby/off mode, and the corresponding power consumption levels.(16)Benchmarks for currently available technologies with low standby and off mode power consumption should be identified. This helps to ensure wide availability and easy access to information, in particular for SMEs and very small firms, which further facilitates the integration of best-design technologies for reducing the energy consumption of standby and off mode.(17)The measures provided for in this Regulation are in accordance with the opinion of the Committee established by Article 19(1) of Directive 2005/32/EC,HAS ADOPTED THE FOLLOWING REGULATION: