Eurlexa

English
- Sign in
- Register

Commission Regulation (EC) No 1221/2008 of 5 December 2008 amending Regulation (EC) No 1580/2007 laying down implementing rules of Council Regulations (EC) No 2200/96, (EC) No 2201/96 and (EC) No 1182/2007 in the fruit and vegetable sector as regards marketing standards

Modified by

Commission Implementing Regulation (EU) No 543/2011of 7 June 2011laying down detailed rules for the application of Council Regulation (EC) No 1234/2007 in respect of the fruit and vegetables and processed fruit and vegetables sectors, 32011R0543, June 15, 2011

Corrected by

Corrigendum to Commission Regulation (EC) No 1221/2008 of 5 December 2008 amending Regulation (EC) No 1580/2007 laying down implementing rules of Council Regulations (EC) No 2200/96, (EC) No 2201/96 and (EC) No 1182/2007 in the fruit and vegetable sector as regards marketing standards, 32008R1221R(01), February 5, 2009

Commission Regulation (EC) No 1221/2008of 5 December 2008amending Regulation (EC) No 1580/2007 laying down implementing rules of Council Regulations (EC) No 2200/96, (EC) No 2201/96 and (EC) No 1182/2007 in the fruit and vegetable sector as regards marketing standards "Section 2Conformity checks carried out by Member States

Article 10Conformity checks1.Member States shall ensure that conformity checks are carried out selectively, based on a risk analysis, and with appropriate frequency, so as ensure appropriate compliance with the marketing standards and other provisions of this Title and of Articles 113 and 113a of Regulation (EC) No 1234/2007.The criteria to assess the risk shall include the existence of a conformity certificate referred in Article 12a issued by a competent authority of a third country whose checks on conformity have been approved according Article 13. The existence of such certificate shall be considered as a factor reducing the risk of non-conformity.The criteria to assess the risk may also include:(a)the nature of the product, the period of production, the price of the product, the weather, the packing and handling operations, the storage conditions, the country of origin, the means of transport or the volume of the lot;(b)the size of the traders, their position in the marketing chain, the volume or value marketed by them, their product range, the delivery area or the type of business carried out such as storage, sorting, packing or sale;(c)findings made during previous checks including the number and type of defects found, the usual quality of products marketed, the level of technical equipment used;(d)the reliability of traders quality assurance systems or self-checking systems related to the conformity to marketing standards;(e)the place where the check is carried out in particular if it is the point of first entry into the Community, or the place where the products are being packed or loaded;(f)any other information that might indicate a risk of non-compliance.2.The risk analysis shall be based on the information contained in the traders' database referred to in Article 9 and shall classify traders in risk categories.Member States shall lay down in advance:(a)the criteria for assessing the risk of non-conformity of lots;(b)on the basis of a risk analysis for each risk category, the minimum proportions of traders or lots and/or quantities which will be subject to a conformity check.Member States may choose not to carry out selective checks on products not subject to specific marketing standards, based on a risk analysis.3.Where checks reveal significant irregularities, Member States shall increase the frequency of checks in relation to traders, products, origins, or other parameters.4.Traders shall provide inspection bodies with all the information those bodies judge necessary for organising and carrying out conformity checks.

Article 11Approved traders1.Member States may authorise traders classified in the lowest risk category and providing special guarantees on conformity to marketing standards to use the specimen in Annex II in the labelling of each package at the stage of dispatch and/or to sign the conformity certificate as referred in Article 12a.2.The authorisation shall be granted for a period of at least one year.3.Traders benefiting from this possibility shall:(a)have inspection staff who have received training approved by the Member States;(b)have suitable equipment for preparing and packing produce;(c)commit themselves to carry out a conformity check on the goods they dispatch and have a register recording all checks carried out.4.Where an authorised trader no longer complies with the requirements for authorisation the Member State shall withdraw the authorisation.5.Notwithstanding paragraph 1, authorised traders may continue to use specimens which conformed to this Regulation on 30 June 2009 until stocks are exhausted.Authorisations granted to traders before 1 July 2009 shall continue to apply for the period for which they were granted.

Article 12Acceptance of declarations by customs1.Customs may only accept export declarations and/or declarations for the release for free circulation for the products subject to specific marketing standards if:(a)the goods are accompanied by a conformity certificate, or(b)the competent inspection body has informed the customs authority that the lots concerned have been issued a conformity certificate, or(c)the competent inspection body has informed the customs authority that it has not issued a conformity certificate for the lots concerned because they do not needed to be checked in the light of the risk assessment referred to in Article 10(1).This shall be without prejudice to any conformity checks the Member State may carry out pursuant to Article 102.Paragraph 1 shall also apply to products subject to the general marketing standard set out in Annex I and products referred to in Article 3(1)(a) if the Member State concerned considers it necessary in the light of the risk analysis referred to in Article 10(1).

Article 12aConformity certificates1.Certificates may be issued by a competent authority to confirm that the products concerned conform to the relevant marketing standard. The certificate for use by competent authorities in the Community is set out in Annex III.The third countries referred to in Article 13(4) may use instead their own certificate provided the Commission considers that it contains at least equivalent information to the Community certificate. The Commission shall make available, by the means it considers appropriate, specimens of such third country certificates.2.These certificates may be issued either in paper format with original signature or in verified electronic format with electronic signature.3.Each certificate shall be stamped by the competent authority and signed by the person or persons empowered to do so.4.The certificate shall be issued in at least one of the official languages of the Community.5.Each certificate shall bear a serial number, by which it can be identified, and a copy of each issued certificate will be retained by the competent authority.6.Notwithstanding the first subparagraph of paragraph 1, Member States may continue to use conformity certificates which conformed to this Regulation on 30 June 2009 until stocks are exhausted."

Article 1Amendments to Regulation (EC) No 1580/2007Regulation (EC) No 1580/2007 is amended as follows:(1)In Chapter I of Title II, the following Article 2a is inserted before Article 3:

"Article 2aMarketing standards; holders1.The requirements of Article 113a(1) of Regulation (EC) No 1234/2007 shall be known as the general marketing standard. The details of the general marketing standard are set out in Part A of Annex I to this Regulation.Fruit and vegetables not covered by a specific marketing standard shall conform to the general marketing standard. However, where the holder is able to show they are in conformity with any applicable standards adopted by the United Nations Economic Commission for Europe (UNECE), the product shall be considered as conforming to the general marketing standard.2.The specific marketing standards referred to in Article 113(1)(b) and (c) of Regulation (EC) No 1234/2007 are set out in Part B of Annex I to this Regulation as regards the following products:(a)apples,(b)citrus fruit,(c)kiwifruit,(d)lettuces, curled leaved and broad-leaved endives,(e)peaches and nectarines,(f)pears,(g)strawberries,(h)sweet peppers,(i)table grapes,(j)tomatoes.3.For the purposes of Article 113a(3) of Regulation (EC) No 1234/2007, a holder shall be any natural or legal person physically in possession of the products concerned.";

(2)Article 3 is amended as follows:(a)Paragraph 1 is amended as follows:(i)the introductory phrase and the point (a) are replaced by the following:"By way of derogation from Article 113a(3) of Regulation (EC) No 1234/2007, the following shall not be required to conform to the marketing standards:(a)provided they are clearly marked with the words "intended for processing" or "for animal feed" or any other equivalent wording, products:(i)intended for industrial processing, or(ii)intended for animal feed or other non-food use;";(ii)the following point is added:"(d)products having undergone a trimming or cutting making them "ready to eat" or "kitchen ready".";(b)In paragraph 2, the introductory words are replaced by the following:"By way of derogation from Article 113a(3) of Regulation (EC) No 1234/2007, the following shall not be required to conform to the marketing standards within a given production area:";(c)Paragraph 3 is replaced by the following:"3.By way of derogation from Article 113a(3) of Regulation (EC) No 1234/2007, Member States may exempt from the specific marketing standards products presented for retail sale to consumers for their personal use and labelled "product intended for processing" or with any other equivalent wording and intended for processing other than those referred to in point (a)(i) of paragraph 1.";(d)The following paragraphs 3a and 3b are inserted:"3a.By way of derogation from Article 113a(3) of Regulation (EC) No 1234/2007 as regards the specific marketing standards, fresh fruit and vegetables not in Extra Class, at stages following dispatch, may show a slight lack of freshness and turgidity and slight deterioration due to their development and their tendency to perish.3b.By way of derogation from Article 113a(3) of Regulation (EC) No 1234/2007, the following products shall not be required to conform to the general marketing standard:(a)mushrooms other than cultivated mushrooms of CN code 070959,(b)capers of CN code 07099040,(c)bitter almonds of CN code 08021110,(d)shelled almonds of CN code 080212,(e)shelled hazelnuts of CN code 080222,(f)shelled walnuts of CN code 080232,(g)pine nuts of CN code 08029050, and(h)saffron of CN code 091020.";(3)Article 4 is amended as follows:(a)Paragraph 1 is replaced by the following:"1.The information particulars required by this Chapter shall be shown legibly and obviously on one side of the packaging, either indelibly printed directly onto the package or on a label which is an integral part of the package or affixed to it."(b)The following paragraphs are added:"3.In the case of distance contracts within the meaning of Article 2(1) of Directive 97/7/EC of the European Parliament and of the CouncilOJ L 144, 4.6.1997, p. 19.", conformity with the marketing standards shall require that the information particulars shall be available before the purchase is concluded.4.Invoices and accompanying documents, excluding receipts for the consumer, shall indicate the name and the country of origin of the products and, where appropriate, the class, the variety or commercial type if required in a specific marketing standard, or the fact that it is intended for processing.

----------------------

OJ L 144, 4.6.1997, p. 19."(4)Articles 5 and 6 are replaced by the following:

"Article 5Information particulars at the retail stageAt retail stage, the information particulars required by this Chapter shall be legible and conspicuous. Products may be presented for sale provided the retailer displays prominently, adjacent to and legibly the information particulars relating to country of origin and, where appropriate, class and variety or commercial type in such a way as not to mislead the consumer.For pre-packaged products as referred to in Directive 2000/13/EC of the European Parliament and of the CouncilOJ L 109, 6.5.2000, p. 29.", the net weight shall be indicated, in addition to all the information provided for in the marketing standards. However, in the case of products sold by number, the requirement to indicate the net weight shall not apply if the number of items may be clearly seen and easily counted from the outside or, if the number is indicated on the label.

Article 6Mixes1.The marketing of packages of a net weight of 5 kg or less containing mixes of different types of fruit and vegetables shall be allowed, provided that:(a)the products are of uniform quality and each product concerned complies with the relevant specific marketing standard or, where no specific marketing standard exists for a particular product, the general marketing standard,(b)the package is appropriately labelled, in accordance with this Chapter, and(c)the mix is not such as to mislead the consumer.2.The requirements of point (a) of paragraph 1 shall not apply to products included in a mix which are not products of the fruit and vegetables sector as defined in Article 1 of Regulation (EC) No 1234/2007.3.If the fruit and vegetables in a mix originate in more than one Member State or third country, the full names of the countries of origin may be replaced with one of the following, as appropriate:(a)"mix of EC fruit and vegetables",(b)"mix of non-EC fruit and vegetables",(c)"mix of EC and non-EC fruit and vegetables".

----------------------

OJ L 109, 6.5.2000, p. 29."(5)Article 7 is replaced by the following:

"Article 7ScopeThis Chapter lays down rules on conformity checks, which shall mean the checks carried out on fruit and vegetables at all marketing stages in accordance with this Chapter, in order to verify that they conform to the marketing standards and other provisions of this Title and of Articles 113 and 113a of Regulation (EC) No 1234/2007.";

(6)Article 8(1) is amended as follows:(a)Point (b) is replaced by the following:"(b)an inspection body or bodies responsible for the application of Article 113a(4) of Regulation (EC) No 1234/2007, hereinafter called "the inspection bodies".";(b)The following subparagraph is added:"The coordinating authorities and inspection bodies referred to in the first subparagraph may be public or private. However the Member States shall be responsible for them in either case.";(7)Article 9 is amended as follows:(a)The second subparagraph of paragraph 1 is replaced by the following subparagraphs:"Member States may use for this purpose any other database or databases already established for other purposes."Trader" means any natural or legal person:(a)holding fruit and vegetables subject to marketing standards with a view to:(i)displaying or offering them for sale,(ii)selling them, or(iii)marketing them in any other manner, or(b)who actually carries out any of the activities referred to in points (i), (ii) and (iii) of point (a) as regards fruit and vegetables subject to marketing standards.The activities referred to in points (i), (ii) and (iii) of point (a) of the third subparagraph shall cover:(a)distance selling whether by internet or otherwise,(b)such activities carried out by the natural or legal person for itself or on behalf of a third party, and(c)such activities carried out in the Community and/or by export to third countries and/or import from third countries.";(b)Point (b) of paragraph 2 is replaced by the following:"(b)natural or legal persons whose activities in the fruit and vegetables sector are limited either to the transport of goods, or to the sale at the retail stage.";(c)Paragraphs 3 and 4 are replaced by the following:"3.Where the database is composed of several distinct elements, the coordinating authority shall ensure that the database, its elements and their updating are uniform. The updating shall be done in particular using the information collected during conformity checks.4.This database shall contain, for each trader, the registration number, name, address, information needed for its classification in one of the risk categories mentioned in Article 10(2), in particular, position in the marketing chain, information concerning the importance of the firm, information concerning findings made during previous checks of each trader, as well as any other information considered necessary for checks such as information concerning the existence of a quality assurance system or self-check system related to the conformity to the marketing standards. The updating shall be carried out in particular using the information collected during conformity checks.";(8)Section 2 of Chapter II of Title II is replaced by the following:(9)Article 13 is amended as follows:(a)Paragraph 1 is replaced by the following:"1.At the request of a third country, the Commission may approve, in accordance with the procedure laid down in Article 195(2) of Regulation (EC) No 1234/2007, checks on conformity to specific marketing standards performed by this third country prior to import into the Community."(b)Paragraph 4 is replaced by the following:"4.The list of countries whose checks on conformity have been approved under this Article, and the products concerned, are set out in Annex IV.The Commission shall make available, by the means it considers appropriate, details of the official authorities and inspection bodies concerned."(10)Article 14 is deleted.(11)Article 15 is replaced by the following:

"Article 15Suspension of approvalThe Commission may suspend approval if it is found that, in a significant number of lots and/or quantities, the goods do not correspond to the information in the certificates of conformity issued by the third country inspection bodies."

(12)Articles 16, 17 and 18 are deleted.(13)Section 4 of Chapter II of Title II is deleted.(14)Article 20 is amended as follows:(a)Paragraph 2 is replaced by the following:"2.Where inspectors find that the goods conform with the marketing standards, the inspection body may issue a conformity certificate as set out in Annex III."(b)The third subparagraph of paragraph 3 is replaced by the following:"If an inspection body accepts a trader's wish to bring the goods into conformity in a Member State other than that where the check leading to a finding of non-conformity has been carried out, the trader shall notify the competent inspection body of the destination Member State of the non-conforming lot. The Member State issuing the finding of non-conformity shall send a copy of this finding to the other Member States concerned including the Member State of destination of the non-conforming lot."(c)Paragraph 4 of is deleted.(15)The following Section is added to Chapter II of Title II:"Section 6Communications

Article 20aCommunications1.A Member State on whose territory a consignment from another Member State is found not to conform with the marketing standards because of defects or deterioration which could have been detected at the time of packaging shall notify forthwith the Commission and the Member States likely to be concerned.2.A Member State on whose territory a lot of goods from a third country has been rejected from release into free circulation because of non-compliance with the marketing standards shall notify forthwith the Commission, the Member States likely to be concerned and the third country concerned and listed in Annex IV.3.Member States shall communicate to the Commission the provisions of their inspection and risk analysis systems. They shall inform the Commission of any subsequent amendments to that systems.4.The Member States shall communicate to the Commission and the Member States the summarised results of the inspections at all marketing stages in a given year by 30 June of the following year.5.Communications shall be made by the means specified by the Commission."

(16)Annex I is replaced by the text in Annex I to this Regulation.(17)Annex II is replaced by the text in Annex II to this Regulation.(18)Annex III is replaced by the text in Annex III to this Regulation.(19)The title of Part A and Parts B and C of Annex IV are deleted.(20)Annex V is deleted.(21)Annex VI is replaced by the text in Annex IV to this Regulation.

Article 2RepealsRegulations (EEC) No 1292/81, (EEC) No 2213/83, (EEC) No 1591/87, (EEC) No 1677/88, (EC) No 831/97, (EC) No 2288/97, (EC) No 963/98, (EC) No 730/1999, (EC) No 1168/1999, (EC) No 1455/1999, (EC) No 2377/1999, (EC) No 2561/1999, (EC) No 2789/1999, (EC) No 790/2000, (EC) No 851/2000, (EC) No 175/2001, (EC) No 912/2001, (EC) No 1508/2001, (EC) No 1543/2001, (EC) No 1615/2001, (EC) No 1799/2001, (EC) No 2396/2001, (EC) No 843/2002, (EC) No 1284/2002, (EC) No 1466/2003, (EC) No 1757/2003, (EC) No 85/2004, (EC) No 86/2004, (EC) No 214/2004, (EC) No 1673/2004, (EC) No 1861/2004, (EC) No 1862/2004, (EC) No 1863/2004 and (EC) No 634/2006 are repealed.

Article 3Entry into forceThis Regulation shall enter into force on the third day following that of its publication in the Official Journal of the European Union.It shall apply from 1 July 2009.

This Regulation shall be binding in its entirety and directly applicable in all Member States.ANNEX I"ANNEX IMARKETING STANDARDS REFERRED TO IN ARTICLE 2aPART AGeneral Marketing standard1.Minimum quality requirementsSubject to the tolerances allowed, the products shall be:intact,sound; products affected by rotting or deterioration such as to make them unfit for consumption are excluded,clean, practically free of any visible foreign matter,practically free from pests,practically free from damage caused by pests affecting the flesh,free of abnormal external moisture,free of any foreign smell and/or taste.The condition of the products must be such as to enable them:to withstand transport and handling,to arrive in satisfactory condition at the place of destination.2.Minimum maturity requirementsThe products must be sufficiently developed and display satisfactory ripeness.The development and state of maturity of the products must be such as to enable them to continue their ripening process and to reach a satisfactory degree of ripeness.3.ToleranceA tolerance of 10 % by number or weight of product not satisfying the minimum quality requirements shall be permitted in each lot. This tolerance shall not however cover product affected by rotting or any other deterioration rendering it unfit for consumption.4.Marking of origin of produceFull name of the country of origin. For products originating in a Member State this shall be in the language of the country of origin or any other language understandable by the consumers of the country of destination. For other products, this shall be in any language understandable by the consumers of the country of destination.PART BSPECIFIC MARKETING STANDARDSPART 1:MARKETING STANDARD FOR APPLESI.DEFINITION OF PRODUCEThis standard applies to apples of varieties (cultivars) grown from Malus domestica Borkh., to be supplied fresh to the consumer, apples for industrial processing being excluded.II.PROVISIONS CONCERNING QUALITYThe purpose of the standard is to define the quality requirements of apples, after preparation and packaging.A.Minimum requirementsIn all classes, subject to the special provisions for each class and the tolerances allowed, apples must be:intact,sound, produce affected by rotting or deterioration such as to make it unfit for consumption is excluded,clean, practically free of any visible foreign matter,practically free from pests,practically free from damage caused by pests,free of abnormal external moisture,free of any foreign smell and/or taste.In addition, they must have been carefully picked.The development and condition of the apples must be such as to enable them:to continue their maturing process and to reach the degree of maturity required in relation to the varietal characteristicsDue to varietal characteristics of the Fuji variety and its mutants concerning maturity at harvest, radial watercore is permitted provided it is contained within the vascular bundles of each fruit.To that end, they must show satisfactory soluble solids content and degree of firmness.,to withstand transport and handling, andto arrive in satisfactory condition at the place of destination.B.ClassificationApples are classified in three classes defined below.(i)"Extra" classApples in this class must be of superior quality. In shape, size and colouring, they must be characteristic of the varietyThe criteria for colouring and russetting are given in the appendix to this standard, as well as a non-exhaustive list of the varieties concerned by each criteria. and with the stalk which must be intact.The flesh must be perfectly sound.They must be free from defects with the exception of very slight superficial defects provided these do not affect the general appearance of the produce, the quality, the keeping quality and presentation in the package.(ii)Class IApples in this class must be of good quality. In shape, size and colouring, they must be characteristic of the varietyThe criteria for colouring and russetting are given in the appendix to this standard, as well as a non-exhaustive list of the varieties concerned by each criteria..The flesh must be perfectly sound.The following slight defects, however, may be allowed provided these do not affect the general appearance of the produce, the quality, the keeping quality and presentation in the package:a slight defect in shape,a slight defect in development,a slight defect in colouring,slight skin defects which must not extend over more than:2 cm in length for defects of elongated shape,1 cm2 of total surface area for other defects, with the exception of scab (Venturia inaequalis), which must not extend over more than 0,25 cm2 of total surface area,slight bruising not exceeding 1 cm2 of total surface area and not discoloured.The stalk may be missing, provided the break is clean and the adjacent skin is not damaged.(iii)Class IIThis class includes apples which do not qualify for inclusion in the higher classes but satisfy the minimum requirements specified aboveThe criteria for colouring and russetting are given in the appendix to this standard, as well as a non-exhaustive list of the varieties concerned by each criteria..The flesh must be free from major defects.The following defects are allowed provided the fruit retains its essential characteristics as regards the quality, the keeping quality and presentation:defects in shape,defects in development,defects in colouring,skin defects which must not extend over more than:4 cm in length for defects of elongated shape,2,5 cm2 of total surface area for other defects, with the exception of scab (Venturia inaequalis), which must not extend over more than 1 cm2 of total surface area,slight bruising not exceeding 1,5 cm2 of total surface area which may be slightly discoloured.III.PROVISIONS CONCERNING SIZINGSize is determined either by the maximum diameter of the equatorial section or by weight.For all varieties and for all classes the minimum size is 60 mm, if measured by diameter or 90 g, if measured by weight. Fruit of smaller sizes may be accepted, if the Brix level of the produce is greater than or equal to 10,5o Brix and the size is not smaller than 50 mm or 70 g.To ensure there is uniformity of size within the package:(a)for fruit sized according to the diameter, the difference in diameter between fruit in the same package shall be limited to:5 mm for "Extra" Class fruit and for Classes I and II fruit packed in rows and layers. However, for apples of the varieties Bramley's Seedling (Bramley, Triomphe de Kiel) and Horneburger, the difference in diameter may amount to 10 mm, and10 mm for Class I fruit packed loose in the package or sales packages. However, for apples of the varieties Bramley's Seedling (Bramley, Triomphe de Kiel) and Horneburger, the difference in diameter may amount to 20 mm, or(b)for fruit sized according to weight, the difference in weight between fruit in the same package shall be limited to:20 % of the average individual fruit weight in the package for "Extra" Class fruit and for Classes I and II fruit packed in rows and layers, and25 % of the average individual fruit weight in the package for Class I fruit packed loose in the package or in consumer packages.There is no sizing uniformity requirement for Class II fruit packed loose in the package or in consumer packages.IV.PROVISIONS CONCERNING TOLERANCESTolerances in respect of quality and size shall be allowed in each package for produce not satisfying the requirements of the class indicated.A.Quality tolerances(i)"Extra" class5 % by number or weight of apples not satisfying the requirements of the class, but meeting those of Class I or, exceptionally, coming within the tolerances of that class.(ii)Class I10 % by number or weight of apples not satisfying the requirements of the class, but meeting those of Class II, or exceptionally, coming within the tolerances of that class.(iii)Class II10 % by number or weight of apples satisfying neither the requirements of the class nor the minimum requirements, with the exception of produce affected by rotting or any other deterioration rendering it unfit for consumption.Within this tolerance, a maximum of 2 % number or weight of fruit is allowed which shows the following defects:serious attacks of cork (bitter pit) or water-core,slight damage or unhealed cracks,very slight traces of rot,presence of internal feeding pests and/or damage to the flesh caused by pests.B.Size tolerancesFor all classes:For all classes: a total tolerance of 10 per cent, by number or weight, of fruit not satisfying the requirements as regards sizing is allowed. This tolerance may not be extended to include produce with a size:5 mm or more below the minimum diameter when size is determined by diameter,10 g or more below the minimum weight when size is determined by weight.V.PROVISIONS CONCERNING PRESENTATIONA.UniformityThe contents of each package must be uniform and contain only apples of the same origin, variety, quality and size (if sized) and the same degree of ripeness.In the case of the "Extra" class, uniformity also applies to colouring.Sales packages of a net weight not exceeding 5 kg may contain mixtures of apples of different varieties, provided they are uniform in quality and, for each variety concerned, in origin, size (if sized) and degree of ripeness.The visible part of the contents of the package must be representative of the entire contents.B.PackagingThe apples must be packed in such a way as to protect the produce properly. In particular, sales packages of a net weight exceeding 3 kg shall be sufficiently rigid to ensure proper protection of the produce.The materials used inside the package must be new, clean and of a quality such as to avoid causing any external or internal damage to the produce. The use of materials, particularly of paper or stamps bearing trade specifications is allowed provided the printing or labelling has been done with non-toxic ink or glue.Packages must be free of all foreign matter.Stickers individually affixed on product shall be such as, when removed, neither to leave visible traces of glue, nor to lead to skin defects.C.PresentationFor "Extra" class, fruit must be packed in layers.VI.PROVISIONS CONCERNING MARKINGEach package must bear the following particulars, in letters grouped on the same side, legibly and indelibly marked, and visible from the outside.A.IdentificationThe name and the address of the packer and/or the dispatcherThis mention may be replaced:for all packages with the exception of pre-packages, by the officially issued or accepted code mark representing the packer and/or the dispatcher, indicated in close connection with the reference "Packer and/or Dispatcher" (or equivalent abbreviations);for pre-packages only, by the name and the address of a seller established within the Community indicated in close connection with the mention "Packed for:" or an equivalent mention. In this case, the labelling shall also include a code representing the packer and/or the dispatcher. The seller shall give all information deemed necessary by the inspection body as to the meaning of this code.B.Nature of produce"Apples" if the contents are not visible from the outsideName of the variety or varieties where appropriate.In the case of sales packages containing a mixture of apples of different varieties, names of each of the different varieties in the package.C.Origin of produceCountry of origin and, optionally, district where grown, or national, regional or local place nameIn the case of sales packages containing a mixture of varieties of apples of different origins, the indication of each country of origin shall appear next to the name of the variety concerned.D.Commercial specificationsClassSize or, for fruit packed in layers, number of units.If identification is by the size, this should be expressed:(a)for produce subject to the uniformity rules, as minimum and maximum diameters or minimum and maximum weight;(b)for produce not subject to the uniformity rules, the diameter or the weight of the smallest fruit in the package followed by "and over" or "+" or equivalent denomination or, where applicable, followed by the diameter or weight of the largest fruit.E.Official control mark (optional)Packages need not to bear the particulars mentioned in the first subparagraph, when they contain sales packages, clearly visible from the outside, and all bearing these particulars. These packages shall be free from any indications such as could mislead. When these packages are palletised, the particulars shall be given on a notice placed in an obvious position on at least two sides of the pallet.Appendix1.Colouring criteria, colouring groups and codes

Colouring group	A(Red varieties)	B(Mixed red colouring varieties)	C(Striped slightly coloured varieties)	D(Other varieties)
Colouring group	Total surface area of red colouring characteristic of the variety	Total surface area of mixed red colouring characteristic of the variety	Total surface area of slightly red coloured, blushed or striped characteristic of the variety	D(Other varieties)
Extra class	3/4	1/2	1/3	No requirement as to red colouring
Class I	1/2	1/3	1/10
Class II	1/4	1/10	—

2.Russeting criteriaGroup R: Varieties for which russeting is a characteristic of the skin and is not a defect if it corresponds to the typical appearance of the variety.For varieties not marked with an "R" in the list below, russeting is allowed within the following limits:

	"Extra" class	Class I	Class II	Tolerance for Class II
(i)Brown patches	not outside the stem cavity	may go slightly beyond the stem or pistil cavities	may go beyond the stem or pistil cavities	fruit not seriously detracting from the appearance and condition of the package
(i)Brown patches	not rough	not rough	slightly rough
(ii)Russeting		Maximum surface area of the fruit permitted
thin net-like russeting (not contrasting strongly with the general colouring of the fruit)	slight and isolated traces of russeting not altering the general appearance of the fruit or of the package	1/5	1/2	fruit not seriously detracting from the appearance and condition of the package
heavy	none	1/20	1/3	fruit not seriously detracting from the appearance and condition of the package
cumulative defects (with the exception of the brown patches which are excluded from these cumulative defects). In no case may thin russeting and heavy russeting taken together exceed a maximum of:	—	1/5	1/2	fruit not seriously detracting from the appearance and condition of the package

3.Non-exhaustive list of apple varieties classified according to their colouring and russeting criteriaFruits of varieties that are not part of the list must be graded according to their varietal characteristics.

At least 20 % red in Class I and Class II.However, for the variety Jonagold, at least one-tenth surface of the fruit in Class II must be streaked with red colouring.

Varieties	Synonyms	Colour group	Russeting
African Red		B
Akane	Tohoku 3	B
Alborz Seedling		C
Aldas		B
Alice		B
Alkmene	Early Windsor	C
Alwa		B
Angold		C
Apollo	Beauty of Blackmoor	C
Arkcharm	Arkansas No 18, A 18	C
Arlet		B	R
Aroma		C
Red coloured mutants of Aroma, for example Aroma Amorosa		B
Auksis		B
Belfort	Pella	B
Belle de Boskoop and mutants		D	R
Belle fleur double		D
Berlepsch	Freiherr von Berlepsch	C
Berlepsch rouge	Red Berlepsch, Roter Berlepsch	B
Blushed Golden
Bohemia		B
Boskoop rouge	Red Boskoop, Roter Boskoop	B	R
Braeburn		B
Red coloured mutants of Braeburn, for example:		A
Hidala
Joburn
Lochbuie Red Braeburn
Mahana Red
Mariri Red
Redfield
Royal Braeburn
Bramley's Seedling	Bramley, Triomphe de Kiel	D
Brettacher Sämling		D
Calville (group of …)		D
Cardinal		B
Carola	Kalco	C
Caudle		B
Charden		D
Charles Ross		D
Civni		B
Coromandel Red	Corodel	A
Cortland		B
Cox's orange pippin and mutants	Cox Orange	C	R
Red coloured mutants of Cox's Orange Pippin for example:		B	R
Cherry Cox
Crimson Bramley		D
Cripps Pink		C
Cripps Red		C
Dalinbel		B
Delblush		D
Delcorf and mutants, for example:DaliliMonidel		C
Delgollune		B
Delicious ordinaire	Ordinary Delicious	B
Deljeni		D
Delikates		B
Delor		C
Discovery		C
Dunn's Seedling		D	R
Dykmanns Zoet		C
Egremont Russet		D	R
Elan		D
Elise	Red Delight	A
Ellison's orange	Ellison	C
Elstar and mutants, for example:		C
Daliter
Elshof
Elstar Armhold
Elstar Reinhardt
Red coloured mutants of Elstar, for example:		B
Bel-El
Daliest
Goedhof
Red Elstar
Valstar
Empire		A
Falstaff		C
Fiesta	Red Pippin	C
Florina		B
Fortune		D	R
Fuji and mutants		B
Gala		C
Red coloured mutants of Gala, for example:		A
Annaglo
Baigent
Galaxy
Mitchgla
Obrogala
Regala
Regal Prince
Tenroy
Garcia		D
Gloster		B
Goldbohemia		D
Golden Delicious and mutants		D
Golden Russet		D	R
Goldrush	Coop 38	D
Goldstar		D
Gradigold		D
Granny Smith		D
Gravenstein rouge	Red Gravenstein, Roter Gravensteiner	B
Gravensteiner	Gravenstein	D
Greensleeves		D
Holsteiner Cox and mutants	Holstein	D	R
Holstein rouge	Red Holstein, Roter Holsteiner Cox	C	R
Honeycrisp		C
Honeygold		D
Horneburger		D
Howgate Wonder	Manga	D
Idared		B
Ingrid Marie		B	R
Isbranica	Izbranica	C
Jacob Fisher		D
Jacques Lebel		D
Jamba		C
James Grieve and mutants		D
James Grieve rouge	Red James Grieve	B
Jarka		C
Jerseymac		B
Jester		D
Jonagold and mutants, for example:		C
Crowngold
Daligo
Daliguy	Jonasty
Dalijean	Jonamel
Jonagold 2000	Excel
Jonabel
Jonabres
King Jonagold
New Jonagold	Fukushima
Novajo	Veulemanns
Schneica
Wilmuta
Jonagored and mutants, for example:		A
Decosta
Jomured	Van de Poel
Jonagold Boerekamp
Jomar
Jonagored Supra
Jonaveld
Primo
Romagold	Surkijn
Rubinstar
Red Jonaprince
Jonalord		C
Jonathan		B
Julia		B
Jupiter		D
Karmijn de Sonnaville		C	R
Katy	Katja	B
Kent		D	R
Kidd's orange red		C	R
Kim		B
Koit		C
Krameri Tuvioun		B
Kukikovskoje		B
Lady Williams		B
Lane's Prince Albert		D
Laxton's Superb	Laxtons Superb	C	R
Ligol		B
Lobo		B
Lodel		A
Lord Lambourne		C
Maigold		B
Mc Intosh		B
Meelis		B
Melba		B
Melodie		B
Melrose		C
Meridian		C
Moonglo		C
Morgenduft	Imperatore	B
Mountain Cove		D
Mutsu		D
Normanda		C
Nueva Europa		C
Nueva Orleans		B
Odin		B
Ontario		B
Orlovskoje Polosatoje		C
Ozark Gold		D
Paula Red		B
Pero de Cirio		D
Piglos		B
Pikant		B
Pikkolo		C
Pilot		C
Pimona		C
Pinova		C
Pirella		B
Piros		C
Rafzubex		A
Rafzubin		C
Rajka		B
Rambour d'hiver		D
Rambour Franc		B
Reanda		B
Rebella		C
Red Delicious and mutants, for example:		A
Campsur
Erovan
Evasni
Flatrar
Fortuna Delicious
Otago
Red King
Red Spur
Red York
Richared
Royal Red
Sandidge
Shotwell Delicious
Stark Delicious
Starking
Starkrimson
Starkspur
Topred
Trumdor
Well Spur
Red Dougherty		A
Red Rome		A
Redkroft		A
Regal		A
Regina		B
Reglindis		C
Reine des Reinettes	Goldparmäne, Gold Parmoné	C
Reineta Encarnada		B
Reinette Rouge du Canada		B
Reinette d'Orléans		D
Reinette Blanche du Canada	Reinette du Canada, Canada Blanc, Kanadarenette, Renetta del Canada	D	R
Reinette de France		D
Reinette de Landsberg		D
Reinette grise du Canada	Graue Kanadarenette	D	R
Relinda		C
Remo		B
Renora		B
Resi		B
Resista		D
Retina		B
Rewena		B
Roja de Benejama	Verruga, Roja del Valle, Clavelina	A
Rome Beauty	Belle de Rome, Rome	B
Rosana	Berner Rosenapfel	B
Royal Beaut		A
Rubin		C
Rubinola		B
Sciearly		A
Scifresh		B
Sciglo		A
Sciray	GS48	A
Scired		A	R
Sciros		A
Selena		B
Shampion		B
Sidrunkollane Talioun		D
Sinap Orlovskij	Orlovski Sinap	D
Snygold	Earlygold	D
Sommerregent		C
Spartan		A
Splendour		A
St. Edmunds Pippin		D	R
Stark's Earliest		C
Štaris	Staris	A
Sturmer Pippin		D	R
Sügisdessert		C
Sügisjoonik		C
Summerred		B
Sunrise		A
Sunset		D	R
Suntan		D	R
Sweet Caroline		C
Talvenauding		B
Tellisaare		B
Tiina		B
Topaz		B
Tydeman's Early Worcester	Tydeman's Early	B
Veteran		B
Vista Bella	Bellavista	B
Wealthy		B
Worcester Pearmain		B
York		B
Zarja Alatau	Zarya Alatau	D

----------------------

At least 20 % red in Class I and Class II.However, for the variety Jonagold, at least one-tenth surface of the fruit in Class II must be streaked with red colouring.PART 2:MARKETING STANDARD FOR CITRUS FRUITSI.DEFINITION OF PRODUCEThis standard applies to the following fruit, classified as "citrus fruit", to be supplied fresh to the consumer, citrus fruit for industrial processing being excluded:lemons of varieties (cultivars) grown from the species Citrus limon (L.) Burm. f.,mandarins of varieties (cultivars) grown from the species Citrus reticulata Blanco, including satsumas (Citrus unshiu Marcow.), clementines (Citrus clementina Hort. ex Tan.), common mandarins (Citrus deliciosa Ten.) and tangerines (Citrus tangerina Hort. ex Tan.) grown from these species and its hybrids, hereinafter called "mandarins",oranges of varieties (cultivars) grown from the species Citrus sinensis (L.) Osb.II.PROVISIONS CONCERNING QUALITYThe purpose of the standard is to define the quality requirements of the citrus fruit after preparation and packaging.A.Minimum requirementsIn all classes, subject to the special provisions for each class and the tolerances allowed, the citrus fruit must be:intact,free of bruising and/or extensive healed over cuts,sound; produce affected by rotting or deterioration such as to make it unfit for consumption is excluded,clean practically free of any visible foreign matter,practically free from pests,practically free from damage caused by pests,free of signs of internal shrivelling,free of damage caused by low temperature or frost,free of all abnormal external moisture,free of any foreign smell and/or taste.The citrus fruit must have been carefully picked and have reached an appropriate degree of development and ripeness account being taken of criteria proper to the variety, the time of picking and the growing area.The development and state of ripeness of the citrus fruit must be such as to enable them:to withstand transport and handling, andto arrive in satisfactory condition at the place of destination.Citrus fruit meeting the ripeness requirements of this Annex may be "degreened". This treatment is permitted only if the other natural organoleptic characteristics are not modified.B.Maturity requirementsMaturity of citrus fruit is defined by the following parameters specified for each specie below:1.Minimum juice content2.ColouringThe degree of colouring shall be such that, following normal development the citrus fruit reach the colour typical of the variety at their destination point.(i)LemonsMinimum juice content:

Verdelli and Primofiore lemons:	20 %
Other lemons:	25 %

Colouring: must be typical of the variety. However fruits with a green (but not dark green) colour are allowed provided they satisfy the minimum requirements as to juice content.(ii)MandarinsMinimum juice content:

Mandarins, excluding Clementines:	33 %
Clementines:	40 %

Colouring: must be typical of the variety on at least one third of the surface of the fruit.(iii)OrangesColouring must be typical of the variety. Fruits with light green colour are allowed, provided it does not exceed one fifth of the total surface of the fruit. Fruits must show the following minimum juice content:

Blood oranges:	30 %
Navels group:	33 %
Other varieties:	35 %

However, oranges produced in areas with high air temperatures and high relative humidity conditions during the developing period can be of a green colour exceeding one fifth of the total surface area, provided they satisfy the following minimum juice content:

Varieties Mosambi, Sathgudi and Pacitan:	33 %
Other varieties:	45 %

C.ClassificationCitrus fruit are classified in three classes defined below:(i)"Extra" ClassCitrus fruit in this class must be of superior quality. In shape, external appearance, development and colouring they must be characteristic of the variety and/or commercial type.They must be free from defects with the exception of very slight superficial defects, provided these do not affect the general appearance of the produce, the quality, the keeping quality and presentation in the package.(ii)Class ICitrus fruit in this class must be of good quality. They must be characteristic of the variety and/or commercial type.The following slight defects, however, may be allowed provided these do not affect the general appearance of the produce, the quality, the keeping quality and presentation in the package:slight defect in shape,slight defect in colouring,slight skin defects occurring during the formation of the fruit, such as silver scurfs, russets, etc.,slight healed defects due to a mechanical cause such as hail damage, rubbing, damage from handling, etc.(iii)Class IIThis class includes citrus fruit which do not qualify for inclusion in the higher classes but satisfy the minimum requirements specified above.The following defects may be allowed, provided the citrus fruit retain their essential characteristics as regards the quality, the keeping quality and presentation:defect in shape,defect in colouring,rough skin,skin defects occurring during the formation of the fruit, such as silver scurfs, russets, etc.,healed defects due to a mechanical cause such as hail damage, rubbing, damage from handling, etc.,superficial healed skin alterations,slight and partial detachment of the pericarp for oranges (which is allowed for mandarins).III.PROVISIONS CONCERNING SIZINGSize is determined by the maximum diameter of the equatorial section of the fruit.A.Minimum sizeFruits of less than the following minimum sizes are excluded:

Lemons:	45 mm
Mandarins, excluding clementines:	45 mm
Clementines:	35 mm
Oranges:	53 mm

B.Size scalesThe scales of sizes are as follows:

Sizes below 45 mm refer only to clementines.

Oranges		Lemons		Mandarins
Size code	Diameter(mm)	Size code	Diameter(mm)	Size code	Diameter(mm)
0	92-110	0	79-90	1-XXX	78 and above
1	87-100	1	72-83	1-XX	67-78
2	84-96	2	68-78	1 or 1-X	63-74
3	81-92	3	63-72	2	58-69
4	77-88	4	58-67	3	54-64
5	73-84	5	53-62	4	50-60
6	70-80	6	48-57	5	46-56
7	67-76	7	45-52	6	43-52
8	64-73			7	41-48
9	62-70			8	39-46
10	60-68			9	37-44
11	58-66			10	35-42
12	56-63
13	53-60

Citrus fruit may be packed by count. In this case, provided the size uniformity required in Title III, point C, is retained, the size range in the package may fall outside a single size code, but within two adjacent codes.C.UniformityUniformity in size is achieved by the abovementioned size scales, unless otherwise stated as follows:(i)for fruit arranged in regular layers, in packages or in unit consumer packages, the difference between the smallest and the largest fruit in the same package, within a single size code or, in the case of citrus fruit packed by count, within two adjacent codes, must not exceed the following maxima:

	Size codes	Maximum difference between fruit in the same package(in mm)
Lemons	0 to 7	7
Mandarins	1-XXX-45 to 67 to 10	987
Oranges	0 to 23 to 67 to 13	1197

(ii)for fruit not arranged in regular layers, in packages or in rigid unit consumer packages, the difference between the smallest and the largest fruit in the same package must not exceed the range of the appropriate size grade in the size scale, or, in the case of citrus fruit packed by count, the range in mm of one of the two adjacent codes concerned;(iii)for fruit in bulk bins and fruit in non-rigid (nets, bags, etc.) unit consumer packages, the maximum size difference between the smallest and the largest fruit in the same lot or package must not exceed the range obtained by grouping three consecutive sizes in the size scale.IV.PROVISIONS CONCERNING TOLERANCESTolerances in respect of quality and size shall be allowed in each package for produce not satisfying the requirements of the class indicated.A.Quality tolerances(i)"Extra" Class5 % by number or weight of citrus fruit not satisfying the requirements of the class, but meeting those of Class I or, exceptionally, coming within the tolerances of that class.(ii)Class I10 % by number or weight of citrus fruit not satisfying the requirements of the class, but meeting those of Class II, or exceptionally, coming within the tolerances of that class.(iii)Class II10 % by number or weight of citrus fruit satisfying neither the requirements of the class, nor the minimum requirements, with the exception of produce affected by rotting or any other deterioration rendering it unfit for consumption. Within this tolerance, a maximum of 5 % is allowed of fruit showing slight superficial unhealed damage, dry cuts or soft and shrivelled fruit.B.Size tolerancesFor all classes and types of presentation: 10 % by number or weight of citrus fruit corresponding to the size immediately below and/or above that (or those, in the case of the combination of three sizes) mentioned on the packages is allowed.In any case, the tolerance of 10 % applies only to fruit not smaller than the following minima:

Lemons:	43 mm
Mandarins, excluding clementines:	43 mm
Clementines:	34 mm
Oranges:	50 mm

V.PROVISIONS CONCERNING PRESENTATIONA.UniformityThe contents of each package must be uniform and contain only citrus fruit of the same origin, variety or commercial type, quality, and size, and appreciably of the same degree of ripeness and development.In addition, for the "Extra" Class, uniformity in colouring is required.The visible part of the contents of the package must be representative of the entire contents.B.PackagingThe citrus fruit must be packed in such a way as to protect the produce properly.The materials used inside the package must be new, clean and of a quality such as to avoid causing any external or internal damage to the produce. The use of materials, particularly of paper or stamps bearing trade specifications is allowed provided the printing or labelling has been done with non-toxic ink or glue.If the fruit are wrapped, thin, dry, new and odourlessThe use of preserving agents or any other chemical substance liable to leave a foreign smell on the skin of the fruit is permitted where it is compatible with the applicable Community provisions. paper must be used.The use of any substance tending to modify the natural characteristics of the citrus fruit, especially its taste or smellThe use of preserving agents or any other chemical substance liable to leave a foreign smell on the skin of the fruit is permitted where it is compatible with the applicable Community provisions., is prohibited.Packages must be free of all foreign matter. However, a presentation where a short (not wooden) twig with some green leaves adheres to the fruit is allowed.Stickers individually affixed on product shall be such as, when removed, neither to leave visible traces of glue, nor to lead to skin defects.C.PresentationThe citrus fruit may be presented:(a)arranged in regular layers in packages;(b)not arranged in regular layers in packages or in bulk bins. This presentation is only allowed for Classes I and II;(c)in individual packages for direct sale to the consumer of a weight less than 5 kg eithermade up by number of fruit, ormade up by net weight of the package.VI.PROVISIONS CONCERNING MARKINGEach package must bear the following particulars, in letters grouped on the same side, legibly and indelibly marked, and visible from the outside.A.IdentificationThe name and the address of the packer and/or the dispatcherThis mention may be replaced:for all packages with the exception of pre-packages, by the officially issued or accepted code mark representing the packer and/or the dispatcher, indicated in close connection with the reference "Packer and/or Dispatcher" (or equivalent abbreviations);for pre-packages only, by the name and the address of a seller established within the Community indicated in close connection with the mention "Packed for:" or an equivalent mention. In this case, the labelling shall also include a code representing the packer and/or the dispatcher. The seller shall give all information deemed necessary by the inspection body as to the meaning of this code.B.Nature of produceName of the species if the produce is not visible from the outside, except for mandarins for which the name of the specie or variety (where applicable) is compulsory,Name of the variety, for oranges,Name of the type:for lemons: the indication "Verdelli" and "Primofiore" where appropriate,for clementines: the indication "Clementines, pipless", "Clementines" (1 to 10 pips), "Clementines with pips" (more than 10 pips) where appropriate.C.Origin of produceCountry of origin and, optionally, district where grown, or national, regional or local place name.D.Commercial specificationsClass.Size code for fruit presented in accordance with the size scale or the upper and the lower limiting size code in the case of three consecutive sizes of the size scale.Size code (or, when fruit packed by count fall under two adjacent codes, size codes or minimum and maximum diameter) and number of fruit, in the case of fruit arranged in layers in the package.When used, mention of the preserving agent or other chemical substances used at post-harvest stage.E.Official control mark (optional)Packages need not to bear the particulars mentioned in the first subparagraph, when they contain sales packages, clearly visible from the outside, and all bearing these particulars. These packages shall be free from any indications such as could mislead. When these packages are palletised, the particulars shall be given on a notice placed in an obvious position on at least two sides of the pallet.PART 3:MARKETING STANDARD FOR KIWIFRUITSI.DEFINITION OF PRODUCEThis standard applies to kiwifruit of varieties (cultivars) grown from Actinidia chinensis (Planch.) and Actinidia deliciosa (A. Chev., C.F. Liang and A.R. Ferguson) to be supplied fresh to the consumer, kiwifruit for industrial processing being excluded.II.PROVISIONS CONCERNING QUALITYThe purpose of the standard is to define the quality requirements of kiwifruit, after preparation and packaging.A.Minimum quality requirementsIn all classes, subject to the special provisions for each class and the tolerances allowed, the kiwifruit must be:intact (but free of peduncle),sound; produce affected by rotting or deterioration such as to make it unfit for consumption is excluded,clean, practically free of any visible foreign matter,practically free from pests,practically free from damage caused by pests,adequately firm; not soft, shrivelled or water-soaked,well formed, double/multiple fruit being excluded,free of abnormal external moisture,free of any foreign smell and/or taste.The development and condition of the kiwifruit must be such as to enable them:to withstand transport and handling, andto arrive in satisfactory condition at the place of destination.B.Minimum maturity requirementsThe kiwifruit must be sufficiently developed and display satisfactory ripeness. In order to satisfy this requirement, the fruit must have attained a degree of ripeness:at packing stage within the region of production and the subsequent delivery by the packer, as well as at import and export stage, of at least 6,2oBrix or an average dry matter content of 15 %,at all other marketing stages, of at least 9,5oBrix.C.ClassificationKiwifruit are classified in three classes defined below.(i)Extra ClassKiwifruit in this class must be of superior quality. They must be well-developed and have all the characteristics and the colouring typical of the variety.They must be free from defects with the exception of very slight superficial defects, provided these do not affect the general appearance of the produce, the quality, the keeping quality and presentation in the package.The ratio of the minimum/maximum diameter of the fruit measured at the equatorial section must be 0,8 or greater.(ii)Class IKiwifruit in this class must be of good quality. They must be characteristic of the variety.They must be firm and the flesh must be perfectly sound.The following slight defects, however, may be allowed provided these do not affect the general appearance of the produce, the quality, the keeping quality and presentation in the package:a slight defect in shape (but free of swelling or malformations),a slight defect in colouring,superficial skin defects, provided the total area affected does not exceed 1 cm2,small "Hayward mark" like longitudinal lines without protuberance.The ratio of the minimum/maximum diameter of the fruit measured at the equatorial section must be 0,7 or greater.(iii)Class IIThis class includes kiwifruit which do not qualify for inclusion in the higher classes, but satisfy the minimum requirements specified above.The fruit must be reasonably firm and the flesh should not show any serious defects.The following defects may be allowed provided the kiwifruit retain their essential characteristics as regards the quality, the keeping quality, and presentation:defects in shape,defects in colouring,skin defects such as small healed cuts or scarred/grazed tissue, provided that the total area affected does not exceed 2 cm2,several more pronounced "Hayward marks" with a slight protuberance,slight bruising.III.PROVISIONS CONCERNING SIZINGSize is determined by the weight of the fruit.The minimum weight for "Extra" Class is 90 g, for Class I is 70 g and for Class II is 65 g.The difference in weight between the largest and the smallest fruit in each package must not exceed:10 g for fruit weighing up to 85 g,15 g for fruit weighing between 85 g and 120 g,20 g for fruit weighing between 120 g and 150 g,40 g for fruit weighing 150 g or more.IV.PROVISIONS CONCERNING TOLERANCESTolerances in respect of quality and size shall be allowed in each package for produce not satisfying the requirements of the class indicated.A.Quality tolerances(i)Extra Class5 % by number or weight of kiwifruit not satisfying the requirements of the class, but meeting those of Class I or, exceptionally, coming within the tolerances of that class.(ii)Class I10 % by number or weight of kiwifruit not satisfying the requirements of the class, but meeting those of Class II or, exceptionally, coming within the tolerances of that class.(iii)Class II10 % by number or weight of kiwifruit satisfying neither the requirements of the class nor the minimum requirements, with the exception of produce affected by rotting, severe bruising or any other deterioration rendering it unfit for consumption.B.Size tolerancesFor all classes: 10 % by number or weight of kiwifruit not satisfying the requirements as regards the minimum weight and/or the size range specified.However, the fruit must be of a size immediately below or above the size indicated or, in the case of the smallest size, they must not weigh less than 85 g in "Extra" Class, 67 g in Class I and 62 g in Class II.V.PROVISIONS CONCERNING PRESENTATIONA.UniformityThe contents of each package must be uniform and contain only kiwifruit of the same origin, variety, quality and size.The visible part of the contents of the package must be representative of the entire contents.B.PackagingThe kiwifruit must be packed in such a way as to protect the produce properly.The materials used inside the package must be new, clean and of a quality such as to avoid causing any external or internal damage to the produce. The use of materials, particularly of paper or stamps, bearing trade specifications is allowed provided the printing or labelling has been done with non — toxic ink or glue.Stickers individually affixed on product shall be such as, when removed, neither to leave visible traces of glue, nor to lead to skin defects.Packages must be free of all foreign matter.C.PresentationIn "Extra" Class, the fruit must be presented separately from one another, and be regularly arranged on one layer.VI.PROVISIONS CONCERNING MARKINGEach package must bear the following particulars, in letters grouped on the same side, legibly and indelibly marked, and visible from the outside:A.IdentificationThe name and the address of the packer and/or the dispatcher.This mention may be replaced:for all packages with the exception of pre — packages, by the officially issued or accepted code mark representing the packer and/or the dispatcher, indicated in close connection with the reference "Packer and/or Dispatcher" (or equivalent abbreviations);for pre — packages only, by the name and the address of a seller established within the Community indicated in close connection with the mention "Packed for:" or an equivalent mention. In this case, the labelling shall also include a code representing the packer and/or the dispatcher. The seller shall give all information deemed necessary by the inspection body as to the meaning of this code.B.Nature of produce"Kiwifruit", "Actinidia" or equivalent denomination, if the contents are not visible from the outside,name of the variety (optional).C.Origin of produceCountry of origin and, optionally, district where grown, or national, regional or local place name.D.Commercial specificationsClass,size expressed by the minimum and maximum weight of the fruit,number of fruit (optional).E.Official control mark (optional)Packages need not bear the particulars mentioned in the first subparagraph, when they contain sales packages, clearly visible from the outside, and all bearing these particulars. These packages shall be free from any indications such as could mislead. When these packages are palletised, the particulars shall be given on a notice placed in an obvious position on at least two sides of the pallet.PART 4:MARKETING STANDARD FOR LETTUCES, CURLED-LEAVED ENDIVES AND BROAD-LEAVED (BATAVIAN) ENDIVESI.DEFINITION OF PRODUCEThis standard applies to:lettuces of varieties (cultivars) grown from:Lactuca sativa L. var. capitata L. (head (cabbage) lettuces including crisphead and "Iceberg" type lettuces).Lactuca sativa L. var. longifolia Lam. (Cos or Romaine lettuces),Lactuca sativa L. var. crispa L. (leaf lettuces) andcrosses of these varieties,curled-leaved endives of varieties (cultivars) grown from Cichorium endivia L. var. crispum Lam.,broad-leaved (Batavian) endives (escaroles) of varieties (cultivars) grown from Cichorium endivia L. var. latifolium Lam.,to be supplied fresh to the consumer.This standard does not apply to produce for industrial processing, produce presented as individual leaves or lettuces in pots.II.PROVISIONS CONCERNING QUALITYThe purpose of the standard is to define the quality requirements for products after preparation and packaging.A.Minimum requirementsIn all classes, subject to the special provisions for each class and the tolerances allowed, the produce must be:intact,sound; produce affected by rotting or deterioration such as to make it unfit for consumption is excluded,clean and trimmed, i.e. practically free from all earth or other growing medium and practically free of any visible foreign matter,fresh in appearance,turgescent,practically free from pests,practically free from damage caused by pests,not running to seed,free of abnormal external moisture,free of any foreign smell and/or taste.In the case of lettuce, a reddish discolouration, caused by low temperature during growth, is allowed, unless it seriously affects the appearance of the produce.The roots must be cut close to the base of the outer leaves and the cut must be neat.The produce must be of normal development.The development and condition of the produce must be such as to enable it:to withstand transport and handling, andto arrive in a satisfactory condition at the place of destination.B.ClassificationProducts are classified in two classes defined below:(i)Class IProduce in this class must be of good quality. It must be characteristic of the variety or commercial type, especially the colour.The produce must also be:well formed,firm, taking into account the cultivation methods and the type of produce,free from damage or deterioration impairing edibility,free from frost damage.Head lettuces must have a single well-formed heart. However, in the case of head lettuces grown under protection, the heart may be small.Cos lettuces must have a heart, which may be small.The centre of curled-leaved endives and broad-leaved (Batavian) endives must be yellow in colour.(ii)Class IIThis class includes produce which does not qualify for inclusion in Class I, but satisfies the minimum requirements specified above.The produce must be:reasonably well formed,free from damage and deterioration which may seriously impair edibility.The following defects may be allowed provided the produce retain their essential characteristics as regards the quality, the keeping quality and presentation:slight defects in colouring,slight damage caused by pests.Head lettuces must have a heart, which may be small. However, in the case of head lettuces grown under protection, absence of heart is permissible.Cos lettuces may show no heart.III.PROVISIONS CONCERNING SIZINGSize is determined by the weight of one unit.A.Minimum weightThe minimum weight for Classes I and II is:

	Open-grown	Grown under protection
Head lettuces (excluding crisphead and "Iceberg" type lettuces) and Cos or Romaine lettuces (excluding "Little gem" type lettuces)	150 g	100 g
Crisphead and "Iceberg" type lettuces	300 g	200 g
Leaf lettuces and "Little gem" type lettuces	100 g	100 g
Curled-leaved endives and broad-leaved (Batavian) endives	200 g	150 g

B.Uniformity(a)LettucesIn all classes, the difference between the lightest and heaviest units in each package must not exceed:40 g when the lightest units weighs less than 150 g per unit,100 g when the lightest unit weighs between 150 g and 300 g per unit,150 g when the lightest unit weighs between 300 g and 450 g per unit,300 g when the lightest unit weighs more than 450 g per unit.(b)Curled-leaved and broad-leaved (Batavian) endivesIn all classes, the difference between the lightest and heaviest units in each package must not exceed 300 g.IV.PROVISIONS CONCERNING TOLERANCESTolerances in respect of quality and size shall be allowed in each package for produce not satisfying the requirements of the class indicated.A.Quality tolerances(i)Class I10 % by number of units not satisfying the requirements of the class but meeting those of Class II or, exceptionally, coming within the tolerances of that class.(ii)Class II10 % by number of units satisfying neither the requirements of the class nor the minimum requirements, with the exception of produce affected by rotting or any other deterioration rendering it unfit for consumption.B.Size tolerancesIn all classes, 10 % by number of units not satisfying the requirements as regards sizing, but weighing no more than 10 % over or under the size in question.V.PROVISIONS CONCERNING PRESENTATIONA.UnformityThe contents of each package must be uniform and contain only produce of the same origin, variety or commercial type, quality and size.However, a mixture of the various types of produce described in this standard may be packed together, provided they are uniform in quality and, for each type concerned, in size. In addition, the types should be clearly distinguishable from one another and the proportion of each type in the package should be visible without damaging the package.The visible part of the contents of the package must be representative of the entire contents.B.PackagingThe produce must be packaged in such a way as to protect it properly.The materials used inside the package must be new, clean and of a quality such as to avoid causing any external or internal damage to the produce. The use of materials, particularly paper or stamps bearing trade specifications is allowed provided the printing or labelling has been done with non-toxic ink or glue.Packages must be free of all foreign matter.Stickers individually affixed on product shall be such as, when removed, neither to leave visible traces of glue, nor to lead to skin defects.C.PresentationProduce presented in more than one layer may be packed base-to-heart provided the layers or heads are suitably protected or separated.VI.PROVISIONS CONCERNING MARKINGEach package must bear the following particulars in letters grouped on the same side, legibly and indelibly marked and visible from the outside.A.IdentificationThe name and the address of the packer and/or the dispatcherThis mention may be replaced:for all packages with the exception of pre-packages, by the officially issued or accepted code mark representing the packer and/or the dispatcher, indicated in close connection with the reference "Packer and/or Dispatcher" (or equivalent abbreviations);for pre-packages only, by the name and the address of a seller established within the Community indicated in close connection with the mention "Packed for:" or an equivalent mention. In this case, the labelling shall also include a code representing the packer and/or the dispatcher. The seller shall give all information deemed necessary by the inspection body as to the meaning of this code.B.Nature of produce"Lettuces", "Butterhead lettuces", "Batavia", "Crisphead lettuces (Iceberg)", "Cos lettuces", "Leaf lettuce" (or, for example and if appropriate, "Oak leaf", "Lollo bionda", "Lollo rossa", "Curled-leaved endives" or "Broad-leaved (Batavian) endives" or other synonyms if the contents are not visible from the outside"Little gem" where appropriate or other synonymsAn indication "grown under protection", or other appropriate indication, where appropriateName of the variety (optional)Where different types of produce are mixed together:the indication "Mixed salads", or,the indication of each type of produce, and, where the contents are not visible from the outside, the indication of the number of pieces of each type.C.Origin of produceCountry of origin and, optionally, district where grown, or national, regional or local place name.D.Commercial specificationsClassSize, expressed by the minimum weight per unit or the number of unitsNet weight (optional),E.Official control mark (optional)Packages need not to bear the particulars mentioned in the first subparagraph, when they contain sales packages, clearly visible from the outside, and all bearing these particulars. These packages shall be free from any indications such as could mislead. When these packages are palletised, the particulars shall be given on a notice placed in an obvious position on at least two sides of the pallet.PART 5:MARKETING STANDARD FOR PEACHES AND NECTARINESI.DEFINITION OF PRODUCEThis standard applies to peaches and nectarinesThis text applies to all varieties grown from Prunus persica Sieb. and Zucc., being peaches or nectarines or similar with attached (clingstones) or unattached stone and smooth or rough skin. grown from varieties (cultivars) of Prunus persica Sieb. and Zucc., to be supplied fresh to the consumer, peaches and nectarines for industrial processing being excluded.II.PROVISIONS CONCERNING QUALITYThe purpose of the standard is to define the quality requirements for peaches and nectarines after preparation and packaging.A.Minimum quality requirementsIn all classes, subject to the special provisions for each class and the tolerances allowed, peaches and nectarines must be:intact,sound; produce affected by rotting or deterioration such as to make it unfit for consumption is excluded,clean, practically free of any visible foreign matter,practically free from pests,practically free from damage caused by pests,free of abnormal external moisture,free of any foreign smell and/or taste.Peaches and nectarines must have been carefully picked.The development and state of peaches and nectarines must be such as to enable them:to withstand transport and handling, andto arrive in satisfactory condition at the place of destination.B.Minimum maturity requirementsThe peaches and nectarines must be sufficiently developed and display satisfactory ripeness.The development and state of maturity of the peaches and nectarines must be such as to enable them to continue their ripening process and to reach a satisfactory degree of ripeness. In order to satisfy this requirement the refractometrix index of the flesh, measured at the middle point of the fruit pulp at the equatorial section must be greater than or equal to 8o Brix and the firmness must be lower than 6,5 kg measured with a plunger of 8 mm diameter (0,5 cm2 at two points of the equatorial section of the fruit.C.ClassificationPeaches and nectarines are classified into three classes as defined below:(i)"Extra" classPeaches and nectarines in this class must be of a superior quality. In shape, development and colouring they must be typical of the variety allowing for the district in which they are grown. They must be free from defects with the exception of very slight superficial defects, provided that these do not affect the general appearance of the produce, its quality, keeping quality and presentation in the package.(ii)Class IPeaches and nectarines in this class must be of good quality. They must be characteristic of the variety, allowing for the district in which they are grown. However, a slight defect in shape, development or colouring may be allowed.The flesh must be perfectly sound.Peaches and nectarines split where the stem is joined to the fruit are excluded.Slight skin defects, however, may be allowed provided these do not affect the general appearance of the produce, the quality, the keeping quality and presentation in the package and do not exceed:1 cm in length for defects of elongated shape,0,5 cm2 in total area for other defects.(iii)Class IIThis class includes peaches and nectarines which do not qualify for inclusion in the higher classes, but which satisfy the minimum requirements specified above.The flesh should not show any serious defects. Fruits split where the stem is joined to the fruit are allowed only in connection with quality tolerances.The following skin defects may be allowed provided the peaches and nectarines retain their essential characteristics as regards the quality, the keeping quality and presentation and do not exceed:2 cm in length for defects of elongated shape,1,5 cm2 in total area for other defects.III.PROVISIONS CONCERNING SIZINGSize is determined by:circumference, ormaximum diameter of the equatorial section.Peaches and nectarines must be graded according to the following scale:

Diameter	Sizing(code)	Circumference
90 mm and above	AAAA	28 cm and above
80 mm and over but under 90 mm	AAA	25 cm and over but under 28 cm
73 mm and over but under 80 mm	AA	23 cm and over but under 25 cm
67 mm and over but under 73 mm	A	21 cm and over but under 23 cm
61 mm and over but under 67 mm	B	19 cm and over but under 21 cm
56 mm and over but under 61 mm	C	17,5 cm and over but under 19 cm
51 mm and over but under 56 mm	D	16 cm and over but under 17,5 cm

The minimum size allowed for the "Extra" class is 17,5 cm (circumference) or 56 mm (diameter).Size D (51 mm and over but under 56 mm in diameter or 16 cm and over but under 17,5 cm in circumference) is not allowed in the period from 1 July to 31 October.Sizing is compulsory for all classes.IV.PROVISIONS CONCERNING TOLERANCESTolerances in respect of quality and size shall be allowed in each package for produce not satisfying the requirements for the class indicated.A.Quality tolerances(i)"Extra" class5 % by number or weight of peaches or nectarines not satisfying the requirements of the class, but meeting those of class I or, exceptionally, coming within the tolerances of that class.(ii)Class I10 % by number or weight of peaches or nectarines not satisfying the requirements of the class, but meeting those of class II or, exceptionally, coming within the tolerances for that class.(iii)Class II10 % by number or weight of peaches or nectarines satisfying neither the requirements of the class nor the minimum requirements, with the exception of fruit affected by rotting, marked bruising or any other deterioration rendering it unfit for consumption.B.Size tolerancesFor all classes, 10 % by number or weight of peaches or nectarines up to 1 cm more or less than the size stated on the package in the case of sizing by circumference and up to 3 mm more or less in the case of sizing by diameter. However, for fruit in the smallest size, this tolerance shall apply only to peaches or nectarines of a size smaller by not more than 6 mm (circumference) or 2 mm (diameter) than the specified minimum size.V.PROVISIONS CONCERNING PRESENTATIONA.UniformityThe contents of each package must be uniform and contain only peaches or nectarines of the same origin, variety, quality, degree of ripeness and size, and for the "Extra" class, the contents must also be uniform in colour.The visible part of the contents of each package must be representative of the entire contents.B.PackagingThe peaches or nectarines must be packed in such a way as to protect the produce properly.The materials used inside the package must be new, clean and of a quality such as to avoid causing any external or internal damage to the produce. The use of materials, particularly of paper or stamps bearing trade specifications is allowed provided the printing or labelling has been done with non-toxic ink or glue.Stickers individually affixed on product shall be such as, when removed, neither to leave visible traces of glue, nor to lead to skin defectsPackages must be free of all foreign matter.C.PresentationThe peaches and nectarines may be presented:in small unit packages,in a single layer, in the case of "Extra" class; each individual fruit in this class must be separated from its neighbours.In classes I and II:in one or two layers, orin no more than four layers when the fruit is placed in rigid pockets so arranged that they do not rest on the fruit in the layer immediately below.VI.PROVISIONS CONCERNING MARKINGEach package must bear the following particulars in letters grouped on the same side, legibly and indelibly marked and visible from the outside:A.IdentificationThe name and the address of the packer and/or the dispatcherThis mention may be replaced:for all packages with the exception of pre-packages, by the officially issued or accepted code mark representing the packer and/or the dispatcher, indicated in close connection with the reference "Packer and/or dispatcher" (or equivalent abbreviations);for pre-packages only, by the name and the address of a seller established within the Community indicated in close connection with the mention "Packed for:" or an equivalent mention. In this case, the labelling shall also include a code representing the packer and/or the dispatcher. The seller shall give all information deemed necessary by the inspection body as to the meaning of this code.B.Nature of produce"Peaches" or "nectarines", if the contents are not visible from the outside,colour of the flesh,name of the variety (optional).C.Origin of produceCountry of origin and, optionally, district where grown, or national, regional or local place name.D.Commercial specificationsclass,size expressed in minimum and maximum diameters or minimum and maximum circumference or according to the coding set out in Section III "Provisions concerning sizing",number of units (optional),minimum sugar content, measured by refractometer and expressed in Brix degrees (optional),maximum firmness, measured by penetrometer and expressed in kg/0,5 cm2 (optional),E.Official control mark (optional)Packages need not to bear the particulars mentioned in the first subparagraph, when they contain sales packages, clearly visible from the outside, and all bearing these particulars. These packages shall be free from any indications such as could mislead. When these packages are palletised, the particulars shall be given on a notice placed in an obvious position on at least two sides of the pallet.PART 6:MARKETING STANDARD FOR PEARSI.DEFINITION OF PRODUCEThis standard applies to pears of varieties (cultivars) grown from Pyrus communis L. to be supplied fresh to the consumer, pears for industrial processing being excluded.II.PROVISIONS CONCERNING QUALITYThe purpose of the standard is to define the quality requirements of pears, after preparation and packaging.A.Minimum requirementsIn all classes, subject to the special provisions for each class and the tolerances allowed, pears must be:intact,sound; produce affected by rotting or deterioration such as to make it unfit for consumption is excluded,clean, practically free of any visible foreign matter,practically free from pests,practically free from damage caused by pests,free of abnormal external moisture,free of any foreign smell and/or taste.In addition, they must have been carefully picked.The development and condition of the pears must be such as to enable them:to continue their ripening process and to reach the degree of ripeness required in relation to the varietal characteristics,to withstand transport and handling andto arrive in satisfactory condition at the place of destination.B.ClassificationPears are classified in three classes defined below.(i)"Extra" ClassPears in this class must be of superior quality. In shape, size and colouring, they must be characteristic of the variety and the stalk must be present and intact.The flesh must be perfectly sound, and the skin free from rough russetingThis does not apply when this russeting is a characteristic of the variety..They must be free from defects with the exception of very slight superficial defects provided these do not affect the general appearance of the fruit, the quality, the keeping quality and presentation in the package.Pears must not be gritty.(ii)Class IPears in this class must be of good quality. In shape, size and colouring, they must be characteristic of the variety.The flesh must be perfectly sound, and the skin free from rough russetingThis does not apply when this russeting is a characteristic of the variety..The following slight defects, however, may be allowed provided these do not affect the general appearance of the produce, the quality, the keeping quality and presentation in the package:a slight defect in shape,a slight defect in development,a slight defect in colouring,slight skin defects which must not extend over more than:2 cm in length for defects of elongated shape,1 cm2 of total surface area for other defects, with the exception of scab (Venturia pirina and V. inaequalis), which must not extend over more than 0,25 cm2 of total surface area,slight bruising not exceeding 1 cm2 of total surface area and not discoloured.The stalk may be slightly damaged.Pears must not be gritty.(iii)Class IIThis class includes pears which do not qualify for inclusion in the higher classes but satisfy the minimum requirements specified above.The flesh must be free from major defects.The following defects are allowed provided the fruit retains its essential characteristics as regards the quality, the keeping quality and presentation:defects in shape,defects in development,defects in colouring,slight rough russetingThis does not apply when this russeting is a characteristic of the variety., skin defects which must not extend over more than:4 cm in length for defects of elongated shape,2,5 cm2 of total surface area for other defects, with the exception of scab (Venturia pirina and V. inaequalis), which must not extend over more than 1 cm2 of total surface area,slight bruising not exceeding 1 cm2 of total surface area which may be slightly discoloured.III.PROVISIONS CONCERNING SIZINGSize is determined by maximum diameter of the equatorial section.A minimum size is required for each class as follows:

A non-exhaustive list of large fruited and summer pear varieties is included in the Appendix to this standard

	"Extra"	Class I	Class II
Large fruited varieties	60 mm	55 mm	55 mm
Other varieties	55 mm	50 mm	45 mm

Exceptionally, and for summer pears included in the Appendix to this standard, no minimum size will be laid down for consignments harvested and dispatched between 10 June and 31 July (inclusive) of any year.To ensure there is uniformity of size within a package, the difference in diameter between fruit in the same package shall be limited to:5 mm for Extra Class fruit and for Class I and II fruit packed in rows and layers,10 mm for Class I fruit packed loose in the package or in sales packages.There is no sizing uniformity limit for Class II fruit packed loose in the package or in sales packages.IV.PROVISIONS CONCERNING TOLERANCESTolerances in respect of quality and size shall be allowed in each package for produce not satisfying the requirements of the class indicated.A.Quality tolerances(i)"Extra" Class5 per cent by number or weight of pears not satisfying the requirements of the class, but meeting those of Class I or, exceptionally, coming within the tolerances of that class.(ii)Class I10 per cent by number or weight of pears not satisfying the requirements of the class, but meeting those of Class II, or exceptionally, coming within the tolerances of that class. However, pears without stalks are not included in this tolerance.(iii)Class II10 per cent by number or weight of pears satisfying neither the requirements of the class nor the minimum requirements, with the exception of produce affected by rotting or any other deterioration rendering it unfit for consumption.Within this tolerance, a maximum of 2 per cent by number or weight of fruit is allowed which shows the following defects:slight damage or unhealed cracks,very slight traces of rot,presence of internal feeding pests and/or damage to the flesh caused by pests.B.Size tolerancesFor all classes:10 per cent by number or weight of fruit corresponding to the size immediately above or below that marked on the package, with, for fruit classified in the smallest grade allowed a maximum variation of 5 mm below the minimum.V.PROVISIONS CONCERNING PRESENTATIONA.UniformityThe contents of each package must be uniform and contain only pears of the same origin, variety, quality and size (if sized) and the same degree of ripeness.In the case of the "Extra" Class, uniformity also applies to colouring.The visible part of the contents of the package must be representative of the entire contents.B.PackagingThe pears must be packed in such a way as to protect the produce properly.The materials used inside the package must be new, clean and of a quality such as to avoid causing any external or internal damage to the produce. The use of materials, particularly of paper or stamps bearing trade specifications is allowed provided the printing or labelling has been done with non-toxic ink or glue.Packages must be free of all foreign matter.Stickers individually affixed on product shall be such as, when removed, neither to leave visible traces of glue, nor to lead to skin defects.C.Presentation"Extra" Class fruit must be packed in rows and layers.VI.PROVISIONS CONCERNING MARKINGEach package must bear the following particulars, in letters grouped on the same side, legibly and indelibly marked, and visible from the outside:A.IdentificationThe name and the address of the packer and/or the dispatcherThis mention may be replaced:for all packages with the exception of pre-packages, by the officially issued or accepted code mark representing the packer and/or the dispatcher, indicated in close connection with the reference "Packer and/or Dispatcher" (or equivalent abbreviations);for pre-packages only, by the name and the address of a seller established within the Community indicated in close connection with the mention "Packed for:" or an equivalent mention. In this case, the labelling shall also include a code representing the packer and/or the dispatcher. The seller shall give all information deemed necessary by the inspection body as to the meaning of this code.B.Nature of produce"Pears" if the contents are not visible from the outside,name of the variety.C.Origin of produceCountry of origin and, optionally, district where grown, or national, regional or local place name.D.Commercial specificationsClass,size or, for fruit packed in rows and layers, number of units.If identification is by the size, this should be expressed:(a)for produce subject to the uniformity rules, as minimum and maximum diameters;(b)for produce not subject to the uniformity rules as the diameter of the smallest fruit in the package followed by "and over" or equivalent denomination or, if appropriate, by the diameter of the largest fruit in the package.E.Official control mark (optional)Packages need not to bear the particulars mentioned in the first subparagraph, when they contain sales packages, clearly visible from the outside, and all bearing these particulars. These packages shall be free from any indications such as could mislead. When these packages are palletised, the particulars shall be given on a notice placed in an obvious position on at least two sides of the pallet.Appendix1.Size criteriaLLarge fruited varietySPSummer pear, for which no minimum size is required in respect of consignments harvested and dispatched between 10 June and 31 July of any year.2.Non-exhaustive list of large fruited and summer pear varieties classified according to their size criteriaSmall fruited and other varieties which do not appear in the list may be marketed as long as they meet the size requirements for other varieties as described in section III of the standard.Some of the varieties listed in the following may be marketed under trade names for which trademark protection has been sought or obtained in one or more countries. The first and second columns of the table hereunder do not intend to include such trade names. Reference to known trademarks have been included in the third column for information only.

Variety	Synonyms	Trade names	Size
Abbé Fétel	Abate Fetel		L
Abugo o Siete en Boca			SP
Akςa			SP
Alka			L
Alsa			L
Amfora			L
Alexandrine Douillard			L
Bergamotten			SP
Beurré Alexandre Lucas	Lucas		L
Beurré Bosc	Bosc, Beurré d'Apremont, Empereur Alexandre, Kaiser Alexandre		L
Beurré Clairgeau			L
Beurré d'Arenberg	Hardenpont		L
Beurré Giffard			SP
Beurré précoce Morettini	Morettini		SP
Blanca de Aranjuez	Agua de Aranjuez, Espadona, Blanquilla		SP
Carusella			SP
Castell	Castell de Verano		SP
Colorée de juillet	Bunte Juli		SP
Comice rouge			L
Concorde			L
Condoula			SP
Coscia	Ercolini		SP
Curé	Curato, Pastoren, Del cura de Ouro, Espadon de invierno, Bella de Berry, Lombardia de Rioja, Batall de Campana		L
D'Anjou			L
Dita			L
D.Joaquina	Doyenné de juillet		SP
Doyenné d'hiver	Winterdechant		L
Doyenné du comice	Comice, Vereinsdechant		L
Erika			L
Etrusca			SP
Flamingo			L
Forelle			L
Général Leclerc		Amber GraceTM	L
Gentile			SP
Golden Russet Bosc			L
Grand champion			L
Harrow Delight			L
Jeanne d'Arc			L
Josephine			L
Kieffer			L
Leonardeta	Mosqueruela, Margallon, Colorada de Alcanadre, Leonarda de Magallon		SP
Lombacad		Cascade®	L
Moscatella			SP
Mramornaja	Mramornoje		L
Mustafabey			SP
Packham's Triumph	Williams d'Automne		L
Passe Crassane	Passa Crassana		L
Perita de San Juan			SP
Pérola			SP
Pitmaston	Williams Duchesse		L
Précoce de Trévoux	Trévoux		SP
Président Drouard			L
Rosemarie			L
Santa Maria	Santa Maria Morettini		SP
Spadoncina	Agua de Verano, Agua de Agosto		SP
Taylors Gold			L
Triomphe de Vienne			L
Williams Bon Chrétien	Bon Chrétien, Bartlett, Williams, Summer Bartlett		L

PART 7:MARKETING STANDARD FOR STRAWBERRIESI.DEFINITION OF PRODUCEThis standard applies to strawberries of varieties (cultivars) grown from the genus Fragaria L. to be supplied fresh to the consumer, strawberries for industrial processing being excluded.II.PROVISIONS CONCERNING QUALITYThe purpose of the standard is to define the quality requirements of strawberries after preparation and packaging.A.Minimum requirementsIn all classes, subject to the special provisions for each class and the tolerances allowed, the strawberries must be:intact,sound; produce affected by rotting or deterioration such as to make it unfit for consumption is excluded,clean, practically free of any visible foreign matter,fresh in appearance, but not washed,practically free from pests,practically free from damage caused by pests,with the calyx (except in the case of wild strawberries); the calyx and the stalk (if present) must be fresh and green,free of abnormal external moisture,free of any foreign smell and/or taste.The strawberries must have been carefully picked.They must be sufficiently developed and display satisfactory ripeness. The development and the condition must be such as to enable them:to withstand transport and handling, andto arrive in satisfactory condition at the place of destination.B.ClassificationThe strawberries are classified in three classes defined below:(i)"Extra" ClassThe strawberries in this class must be of superior quality. They must be characteristic of the variety.They must be bright in appearance, allowing for the characteristics of the variety.They must be free from soil.They must be free from defects with the exception of very slight superficial defects provided these do not affect the general appearance of the produce, the quality, the keeping quality and presentation in the package.(ii)Class IStrawberries in this class must be of good quality. In colouring and shape, they must be characteristic of the variety.The following slight defects, however, may be allowed provided these do not affect the general appearance of the produce, the quality, the keeping quality and presentation in the package:slight defect of shape,a white patch, not exceeding one tenth of the surface area of the fruit,slight superficial pressure marks.They must be practically free from soil.(iii)Class IIThis class includes strawberries which do not qualify for inclusion in the higher classes, but satisfy the minimum requirements specified above.The following defects may be allowed provided the strawberries retain their essential characteristics as regards the quality, the keeping quality and presentation:defects of shape,a white patch not exceeding one fifth of the surface area of the fruit,slight dry bruising not likely to spread,slight traces of soil.III.PROVISIONS CONCERNING SIZINGSize is determined by the maximum diameter of the equatorial section.Strawberries must be of the following minimum sizes:"Extra" Class: 25 mm,Classes I and II: 18 mm.There is no minimum size for wild strawberries.IV.PROVISIONS CONCERNING TOLERANCESTolerances in respect of quality and size shall be allowed in each package for produce not satisfying the requirements of the class indicated.A.Quality tolerances(i)"Extra" Class5 % by number or weight of strawberries not satisfying the requirements of the class but meeting those of Class I or, exceptionally, coming within the tolerances of that class. Of these 5 % not more than 2 % in total may consist of spoilt fruit.(ii)Class I10 % by number or weight of strawberries not satisfying the requirements of the class but meeting those of Class II or, exceptionally, coming within the tolerances of that class. Of these 10 %, not more than 2 % in total may consist of spoilt fruit.(iii)Class II10 % by number or weight of strawberries satisfying neither the requirements of the class nor the minimum requirements, with the exception of produce affected by rotting, severe bruising or any other deterioration rendering it unfit for consumption. Of these 10 %, not more than 2 % in total may consist of spoilt fruit.B.Size tolerancesFor all classes: 10 % by number or weight of strawberries not conforming to the minimum size.V.PROVISIONS CONCERNING PRESENTATIONA.UniformityThe contents of each package must be uniform and contain only strawberries of the same origin, variety and quality.In the "Extra" Class, strawberries — with the exception of wood strawberries — must be particularly uniform and regular with respect to degree of ripeness, colour and size. In Class I, strawberries may be less uniform in size.The visible part of the contents of the package must be representative of the entire contents.B.PackagingThe strawberries must be packed in such a way as to protect the produce properly.The materials used inside the package must be new, clean and of a quality such as to avoid causing any external or internal damage to the produce. The use of materials, particularly of paper or stamps bearing trade specifications is allowed provided the printing or labelling has been done with non-toxic ink or glue.Fruit in the "Extra" Class must be particularly well presented.Packages must be free of all foreign matter.Stickers individually affixed on product shall be such as, when removed, neither to leave visible traces of glue, nor to lead to skin defects.VI.PROVISIONS CONCERNING MARKINGEach package must bear the following particulars, in letters grouped on the same side, legibly and indelibly marked, and visible from the outside:A.IdentificationThe name and the address of the packer and/or the dispatcherThis mention may be replaced:for all packages with the exception of pre-packages, by the officially issued or accepted code mark representing the packer and/or the dispatcher, indicated in close connection with the reference "Packer and/or Dispatcher" (or equivalent abbreviations);for pre-packages only, by the name and the address of a seller established within the Community indicated in close connection with the mention "Packed for:" or an equivalent mention. In this case, the labelling shall also include a code representing the packer and/or the dispatcher. The seller shall give all information deemed necessary by the inspection body as to the meaning of this code.B.Nature of produce"Strawberries", if the contents of the package are not visible from the outside.Name of the variety (optional).C.Origin of produceCountry of origin and, optionally, district where grown or national, regional or local place name.D.Commercial specificationsClass.E.Official control mark (optional)Packages need not to bear the particulars mentioned in the first subparagraph, when they contain sales packages, clearly visible from the outside, and all bearing these particulars. These packages shall be free from any indications such as could mislead. When these packages are palletised, the particulars shall be given on a notice placed in an obvious position on at least two sides of the pallet.PART 8:MARKETING STANDARD FOR SWEET PEPPERSI.DEFINITION OF PRODUCEThis standard applies to sweet peppers of varieties (cultivars) grown from Capsicum annuum L. var. annuum, to be supplied fresh to the consumer, sweet peppers for industrial processing being excluded.According to their shape a distinction is made for four commercial types:elongated sweet peppers (pointed),square sweet peppers (blunt),square tapering sweet peppers (peg top),flat sweet peppers (tomato peppers).II.PROVISIONS CONCERNING QUALITYThe purpose of the standard is to define the quality requirements for sweet peppers after preparation and packaging.A.Minimum requirementsIn all classes, subject to the special provisions for each class and the tolerances allowed, the sweet peppers must be:intact,sound; produce affected by rotting or deterioration such as to make it unfit for consumption is excluded,clean, practically free of any visible foreign matter,fresh in appearance,practically free from pests,practically free from damage caused by pests,well-developed,free of damage caused by frost,free of unhealed injuries,free of sunburn [except for the specifications in Chapter B: Classification, point (ii)],with peduncles attached,free of abnormal external moisture,free of any foreign smell and/or taste.The development and condition of the sweet peppers must be such as to enable them to:withstand transport and handling, andarrive in satisfactory condition at the place of destination.B.ClassificationSweet peppers are classified in two classes, defined below:(i)Class ISweet peppers in this class must be of good quality. They must be characteristic of the variety and/or commercial type as regards development, shape and colour with due regard to the degree of ripeness.They must be:firm,practically free of blemishes.The peduncle may be slightly damaged or cut with the calyx intact.(ii)Class IIThis class includes sweet peppers which do not qualify for inclusion in Class I but satisfy the minimum requirements specified above.The following defects may be allowed provided the peppers retain their essential characteristics as regards the quality, keeping quality and presentation:defects in shape and development,sunburn or slight healed injuries, with a limit of 2 cm in length for defects of elongated shape, and 1 cm2 of the total area for other defects,slight dry superficial cracks not exceeding an overall cumulative length of 3 cm.They may be less firm without being withered.The peduncle may be damaged or cut.III.PROVISIONS CONCERNING SIZINGSize is determined by the shoulder diameter (width) of the sweet peppers. In the case of flat sweet peppers (tomato peppers) the term "width" means the maximum equatorial diameter.For sized sweet peppers, the difference in diameter between the largest and smallest sweet pepper in the same package may not exceed 20 mm.The width of sweet peppers may not be less than:elongated sweet peppers (pointed): 20 mmsquare sweet peppers (blunt) and square tapering sweet peppers (peg-top): 40 mmflat sweet peppers (tomato peppers): 55 mmSizing is not compulsory for Class II, subject to the minimum sizes.The size requirements shall not apply to miniature produceMiniature product means a variety or cultivar of sweet pepper, obtained by plant breeding and/or special cultivation techniques, excluding sweet peppers of non-miniature varieties which have not fully developed or are of inadequate size. All other requirements of the standard must be met..IV.PROVISIONS CONCERNING TOLERANCESTolerances in respect of quality and size shall be allowed in each package for produce not satisfying the requirements of the class indicated.A.Quality tolerances(i)Class I10 % by number or weight of sweet peppers not satisfying the requirements of the class, but meeting those of Class II or, exceptionally, coming within the tolerances of that class.(ii)Class II10 % by number or weight of sweet peppers satisfying neither the requirements of the class nor the minimum requirements, with the exception of produce affected by rotting or any other deterioration rendering it unfit for consumption.B.Size tolerances(i)Class I10 % by number or weight of sweet peppers not conforming to the sizes identified within a margin of ± 5 mm including no more than 5 % of sweet peppers below the minimum size laid down.(ii)Class IISized sweet peppers10 % by number or weight of sweet peppers not conforming to the sizes identified within a margin of ± 5 mm including no more than 5 % of sweet peppers below the minimum size laid down.Unsized sweet peppers5 % by number or weight of sweet peppers up to 5 mm smaller than the minimum size laid down.V.PROVISIONS CONCERNING PRESENTATIONA.UniformityThe contents of each package must be uniform and contain only sweet peppers of the same origin, variety or commercial type, quality, size (if sized) and, in the case of Class I, of appreciably the same degree of ripeness and colouring.However, a mixture of sweet peppers of different colours may be packed together, provided they are uniform in origin, quality, commercial type and size (if sized).Consumer packages of a net weight not exceeding one kilo, may contain mixtures of sweet peppers of different colours and/or commercial types, provided they are uniform in quality, and for each colour and/or commercial type concerned, in origin.In the case of sized produce, elongated sweet peppers should be sufficiently uniform in length.Miniature sweet peppers must be reasonably uniform in size. They may be mixed with other miniature products of a different type and origin.The visible part of the contents of the package must be representative of the entire contents.B.PackagingThe sweet peppers must be packed in such a way as to protect the produce properly.The materials used inside the package must be new, clean and of a quality such as to avoid causing any external or internal damage to the produce. The use of materials, particularly paper or stamps bearing trade specifications is allowed, provided the printing or labelling has been done with non-toxic ink or glue.packages must be free of all foreign matter.Stickers individually affixed on product shall be such as, when removed, neither to leave visible traces of glue, nor to lead to skin defects.VI.PROVISIONS CONCERNING MARKINGEach package must bear the following particulars, in letters grouped on the same side, legibly and indelibly marked, and visible from the outside:A.IdentificationThe name and the address of the packer and/or the dispatcherThis mention may be replaced:for all packages with the exception of pre-packages, by the officially issued or accepted code mark representing the packer and/or the dispatcher, indicated in close connection with the reference "Packer and/or Dispatcher" (or equivalent abbreviations),for pre-packages only, by the name and the address of a seller established within the Community indicated in close connection with the mention "Packed for:" or an equivalent mention. In this case, the labelling shall also include a code representing the packer and/or the dispatcher. The seller shall give all information deemed necessary by the inspection body as to the meaning of this code.B.Nature of produceIf the contents are not visible from the outside:"Sweet peppers",colour,commercial type ("elongated", "square blunt", "square tapering", "flat") or name of the variety.In the case of packages or consumer packages containing a mixture of different colours and/or commercial types of sweet pepper:"Mixed peppers", or equivalent denomination,if the contents are not visible from the outside, colours and/or commercial types of the sweet peppers and number of pieces of each of the colours and/or commercial types concerned.C.Origin of produceCountry of origin and, optionally, district where grown or national, regional or local place name.In the case of consumer packages containing a mixture of sweet peppers of different colours and/or commercial types of different origins, the indication of each country of origin shall appear next to the name of the colour and/or commercial type concerned.D.Commercial specificationsClassSize (if sized) expressed as minimum and maximum diameters or the mark "unsized" where appropriateWhere appropriate, "Mini peppers", "Baby peppers", or other appropriate term for miniature produce. Where several types of miniature produce are mixed in the same package, all products and their respective origins must be mentioned.E.Official control mark (optional)Packages need not to bear the particulars mentioned in the first subparagraph, when they contain sales packages, clearly visible from the outside, and all bearing these particulars. These packages shall be free from any indications such as could mislead. When these packages are palletised, the particulars shall be given on a notice placed in an obvious position on at least two sides of the pallet.PART 9:MARKETING STANDARD FOR TABLE GRAPESI.DEFINITION OF PRODUCEThis standard applies to table grapes of varieties (cultivars) grown from Vitis vinifera L. to be supplied fresh to the consumer, table grapes for industrial processing being excluded.II.PROVISIONS CONCERNING QUALITYThe purpose of the standard is to define the quality requirements for table grapes after preparation and packaging.A.Minimum requirementsIn all classes, subject to the special provisions for each class and the tolerances allowed, bunches and berries must be:sound; produce affected by rotting or deterioration such as to make it unfit for consumption is excluded,clean, practically free of any visible foreign matter,practically free from pests,practically free from damage caused by pests,free of abnormal external moisture,free of any foreign smell and/or taste.In addition, berries must be:intact,well formed,normally developed.Pigmentation due to sun is not a defect.Bunches must have been carefully picked.The juice of the berries shall have a refractometric index of at least:12o Brix for the Alphonse Lavallée, Cardinal and Victoria varieties,13o Brix for all other seeded varieties,14o Brix for all seedless varieties.In addition, all varieties must have satisfactory sugar/acidity ratio levels.The development and condition of the table grapes must be such as to enable them:to withstand transport and handling, andto arrive in satisfactory condition at the place of destination.B.ClassificationThe table grapes are classified into three classes defined below:i)"Extra" classTable grapes in this class must be of superior quality. In shape, development and colouring the bunches must be typical of the variety, allowing for the district in which they are grown, and have no defects. Berries must be firm, firmly attached, evenly spaced along the stalk and have their bloom virtually intact.ii)Class ITable grapes in this class must be of good quality. In shape, development and colouring the bunches must be typical of the variety, allowing for the district in which they are grown. Berries must be firm, firmly attached and, as far as possible, have their bloom intact. They may, however, be less evenly spaced along the stalk than in the "Extra" class.The following slight defects, however; may be allowed, provided these do not affect the general appearance of the produce, the quality, the keeping quality, and presentation in the package:slight defects in shape,slight defects in colouring,very slight sun-scorch affecting the skin only.iii)Class IIThis class includes table grapes which do not qualify for inclusion in the higher classes, but satisfy the minimum requirements specified above.The bunches may show slight defects in shape, development and colouring, provided these do not impair the essential characteristics of the variety, allowing for the district in which they are grown.The berries must be sufficiently firm and sufficiently attached, and, where possible, still have their bloom. They may be less evenly spaced along the stalk than in Class I.The following defects are allowed provided the table grapes retain their essential characteristics as regards the quality, the keeping quality and presentation:defects in shape,defects in colouring,slight sun-scorch affecting the skin only,slight bruising,slight skin defects.III.PROVISIONS CONCERNIG SIZINGSize is determined by the weight of the bunch.The following minimum size requirements per bunch are defined for table grapes grown under glass and for open-grown table grapes, large-berry or small-berry varieties respectively.

	Table grapes grown under glass(if mentioned on the label)	Open grown table grapes
	Table grapes grown under glass(if mentioned on the label)	All varieties except small-berry varieties listed in the Appendix	Small-berry varieties listed in the Appendix
Extra class	300 g	200 g	150 g
Class I	250 g	150 g	100 g
Class II	150 g	100 g	75 g

IV.PROVISIONS CONCERNING TOLERANCESTolerances in respect of quality and size shall be allowed in each package for produce not satisfying the requirements of the class indicated.A.Quality tolerancesi)"Extra" class5 % by weight of bunches not satisfying the requirements of the class, but meeting those for Class I or, exceptionally, coming within the tolerances of that class.ii)Class I10 % by weight of bunches not satisfying the requirements of the class, but meeting those of Class II or, exceptionally, coming within the tolerances for that class.iii)Class II10 % by weight of bunches satisfying neither the requirements of the class nor the minimum requirements, with the exception of produce affected by rotting or any other deterioration rendering it unfit for consumption.B.Size tolerancesi)"Extra" Class and Class I10 % by weight of bunches not satisfying the size requirements of the class, but meeting those of the class immediately below.ii)Class II10 % by weight of bunches not satisfying the size requirements of the class but weighing not less than 75 g.iii)"Extra" class and Classes I and IIIn each consumer package not exceeding 1 kg net weight, one bunch weighing less than 75 g is allowed to adjust the weight, provided the bunch meets all other requirements of the specified class.V.PROVISIONS CONCERNING PRESENTATIONA.UniformityThe contents of each package must be uniform and contain only bunches of the same origin, variety, quality and degree of ripeness.In the case of grapes packed in small consumer packages of a net weight not exceeding 1 kg, uniformity of variety and origin is not required.In the case of the "Extra" Class, the bunches must be of more or less identical size and colouring.The inclusion in each package of bunches of different colours for decorative purposes shall be allowed in the case of the variety Chasselas.The visible part of the contents of the package must be representative of the entire contents.B.PackagingThe table grapes must be packed in such a way as to protect the produce properly.In the case of the "Extra" Class, the bunches must be packed in a single layer.The materials used inside the package must be new, clean and of a quality such as to avoid causing any external or internal damage to the produce. The use of materials, particularly paper or stamps, bearing trade specifications is allowed provided the printing or labelling has been done with non-toxic ink or glue.Packages must be free of all foreign matter, although a fragment of vine shoot no more than 5 cm in length may be left on the stem of the bunch as a form of special presentation.Stickers individually affixed on product shall be such as, when removed, neither to leave visible traces of glue, nor to lead to skin defects.VI.PROVISIONS CONCERNING MARKINGEach package must bear the following particulars in letters grouped on the same side, legibly and indelibly marked, and visible from the outside:A.IdentificationThe name and the address of the packer and/or the dispatcherThis mention may be replaced:for all packages with the exception of pre-packages, by the officially issued or accepted code mark representing the packer and/or the dispatcher, indicated in close connection with the reference "Packer and/or Dispatcher" (or equivalent abbreviations);for pre-packages only, by the name and the address of a seller established within the Community indicated in close connection with the mention "Packed for:" or an equivalent mention. In this case, the labelling shall also include a code representing the packer and/or the dispatcher. The seller shall give all information deemed necessary by the inspection body as to the meaning of this code.B.Nature of produce"Table Grapes", if the contents are not visible from the outside,name of the variety or, where applicable, varieties,"under glass", where applicable.C.Origin of produceCountry (or, where applicable, countries) of origin and, optionally, district where grown, or national, regional or local place name.D.Commercial specificationsClass.E.Official control mark (optional)Packages need not to bear the particulars mentioned in the first subparagraph, when they contain sales packages, clearly visible from the outside, and all bearing these particulars. These packages shall be free from any indications such as could mislead. When these packages are palletised, the particulars shall be given on a notice placed in an obvious position on at least two sides of the pallet.Appendix

Exhaustive list of small-berry varieties

Variety	Other names under which the variety is known
Admirable de Courtiller	Admirable, Csiri Csuri
Albillo	Acerba, Albuela, Blanco Ribera, Cagalon
Angelo Pirovano	I. Pirovano 2
Annamaria	I. Ubizzoni 4
Baltali
Beba	Beba de los Santos, Eva
Catalanesca	Catalanesa, Catalana, Uva Catalana
Chasselas blanc	Chasselas doré, Fendant, Franceset, Franceseta, Gutedel, Krachgutedel, White van der Laan
Chasselas rouge	Roter Gutedel
Chelva	Chelva de Cebreros, Guareña, Mantuo, Villanueva
Ciminnita	Cipro bianco
Clairette	Blanquette, Malvoisie, Uva de Jijona
Colombana bianca	Verdea, Colombana de Peccioli
Dehlro
Delizia di Vaprio	I. Pirovano 46 A
Exalta
Flame Seedless	Red Flame
Gros Vert	Abbondanza, St Jeannet, Trionfo dell'Esposizione, Verdal, Trionfo di Gerusalemme
Jaoumet	Madeleine de St Jacques, Saint Jacques
Madeleine	Angevine, Angevine Oberlin, Madeleine Angevine Oberlin, Republicain
Mireille
Molinera	Besgano, Castiza, Molinera gorda
Moscato d'Adda	Muscat d'Adda
Moscato d'Amburgo	Black Muscat, Hambro, Hamburg, Hamburski Misket, Muscat d'Hambourg, Moscato Preto
Moscato di Terracina	Moscato di Maccarese
Œillade	Black Malvoisie, Cinsaut, Cinsault, Ottavianello, Sinso
Panse precoce	Bianco di Foster, Foster's white, Sicilien
Perla di Csaba	Càbski Biser, Julski muskat, Muscat Julius, Perle de Csaba
Perlaut
Perlette
Pizzutello bianco	Aetonychi aspro, Coretto, Cornichon blanc, Rish Baba, Sperone di gallo, Teta di vacca
Precoce de Malingre
Primus	I. Pirovano 7
Prunesta	Bermestia nera, Pergola rossa, Pergolese di Tivoli
Regina dei Vigneti	Königin der Weingärten, Muskat Szölöskertek Kizalyneja, Szölöskertek Kizalyneh, Rasaki ourgarias, Regina Villoz, Reina de las Viñas, Reine des Vignes, I. Mathiasz 140, Queen of the Vineyards
Servant	Servan, Servant di Spagna
Sideritis	Sidiritis
Sultanines	Bidaneh, Kishmich, Kis Mis, Sultan, Sultana, Sultani, Cekirdesksiz, Sultanina bianca, Sultaniye, Thompson Seedless and mutations
Valenci blanc	Valensi, Valency, Panse blanche
Valenci noir	Planta Mula, Rucial de Mula, Valenci negro
Yapincak

PART 10:MARKETING STANDARD FOR TOMATOESI.DEFINITION OF PRODUCEThis standard applies to tomatoes of the varieties (cultivars) grown from Lycopersicon lycopersicum (L.) Karsten ex Farw./Lycopersicon esculentum Mill. to be supplied fresh to the consumer, tomatoes for industrial processing being excluded.Tomatoes may be classified in four commercial types:"round","ribbed","oblong" or "elongated","cherry" tomatoes (including "cocktail" tomatoes).II.PROVISIONS CONCERNING QUALITYThe purpose of the standard is to define the quality requirements of tomatoes after preparation and packaging.A.Minimum requirementsIn all classes, subject to the special provisions for each class and the tolerances allowed, tomatoes must be:intact,sound; produce affected by rotting or deterioration such as to make it unfit for consumption is excluded,clean, practically free of any visible foreign matter,fresh in appearance,practically free from pests,practically free from damage caused by pests,free of abnormal external moisture,free of any foreign smell and/or taste.In the case of trusses of tomatoes, the stalks must be fresh, healthly, clean, and free from all leaves and any visible foreign matter.The development and condition of the tomatoes must be such as to enable them:to withstand transport and handling, andto arrive in satisfactory condition at the place of destination.B.ClassificationTomatoes are classified in three classes as defined below:(i)"Extra" ClassTomatoes in this class must be of superior quality. They must have firm flesh and must be characteristic of the variety as regards shape, appearance and development.Their colouring, according to their state of ripeness, must be such as to satisfy the requirements set out in the last subparagraph of paragraph A above.They must be free from greenbacks and other defects, with the exception of very slight superficial defects, provided these do not affect the general appearance of the produce, the quality, the keeping quality and presentation in the package.(ii)Class ITomatoes in this class must be of good quality. They must be reasonably firm and characteristic of the variety.They must be free of cracks and visible greenbacks. The following slight defects, however, may be allowed, provided these do not affect the general appearance of the produce, the quality, the keeping quality and presentation in the package:a slight defect in shape and development,a slight defect in colouring,slight skin defects,very slight bruises.Furthermore, "ribbed" tomatoes may show:healed cracks not more than 1 cm long,no excessive protuberances,a small umbilicus, but no suberisation,suberisation of the stigma up to 1 cm,fine blossom scar in elongated form (like a seam), but not longer than two thirds of the greatest diameter of the fruit.(iii)Class IIThis class includes tomatoes which do not qualify for inclusion in the higher classes, but satisfy the minimum requirements specified above.They must be reasonably firm (but may be slightly less firm than in Class I) and must not show unhealed cracks.The following defects may be allowed, provided the tomatoes retain their essential characteristics as regards the quality, the keeping quality and presentation:defects in shape, development and colouring,skin defects or bruises, provided the fruit is not seriously affected,healed cracks not more than 3 cm in length for round, ribbed or oblong tomatoes.Furthermore, "ribbed" tomatoes may show:more pronounced protuberances than allowed in Class I, but without being misshapen,an umbilicus,suberisation of the stigma up to 2 cm2,fine blossom scar in elongated form (like a seam).III.PROVISIONS CONCERNING SIZINGSize is determined by the maximum diameter of the equatorial section. The following provisions shall not apply to "cherry" tomatoes.A.Minimum sizeFor tomatoes classified in the "Extra" Class and Classes I and II, the minimum size is set at:35 mm for "round" and "ribbed" tomatoes,30 mm for "oblong" tomatoes.B.Sizing scaleThe tomatoes are graded according to the following sizing scale:30 mm and over but under 35 mmOnly for "oblong" tomatoes.,35 mm and over but under 40 mm,40 mm and over but under 47 mm,47 mm and over but under 57 mm,57 mm and over but under 67 mm,67 mm and over but under 82 mm,82 mm and over but under 102 mm,102 mm and over.Observance of the sizing scale is compulsory for "Extra" Class and Class I tomatoes.The sizing scale does not apply to trusses of tomatoes.IV.PROVISIONS CONCERNING TOLERANCESTolerances in respect of quality and size shall be allowed in each package for produce not satisfying the requirements of the class indicated.A.Quality tolerances(i)"Extra" Class5 % by number or weight of tomatoes not satisfying the requirements of the class but meeting those of Class I or, exceptionally, coming within the tolerances of that class.(ii)Class I10 % by number or weight of tomatoes not satisfying the requirements of the class but meeting those of Class II or, exceptionally, coming within the tolerances of that class.In the class of trusses of tomatoes, 5 % by number or weight of tomatoes detached from the stalk.(iii)Class II10 % by number or weight of tomatoes satisfying neither the requirements of the class nor the minimum requirements, with the exception of produce affected by rotting, marked bruising or any other deterioration rendering it unfit for consumption.In the case of trusses of tomatoes, 10 % by number or weight of tomatoes detached from the stalk.B.Size tolerancesFor all classes: 10 % by number or weight of tomatoes conforming to the size immediately above or below that specified, with a minimum of 33 mm for "round" and "ribbed" tomatoes and 28 mm for "oblong" tomatoes.V.PROVISIONS CONCERNING PRESENTATIONA.UniformityThe contents of each package must be uniform and contain only tomatoes of the same origin, variety or commercial type, quality and size (if sized).The ripeness and colouring of tomatoes in the "Extra" Class and Class I must be practically uniform. In addition, the length of "oblong" tomatoes must be sufficiently uniform.The visible part of the contents of the package must be representative of the entire contents.B.PackagingThe tomatoes must be packed in such a way as to protect the produce properly.The materials used inside the package must be new, clean and of a quality such as to avoid causing any external or internal damage to the produce. The use of materials, particularly paper or stamps, bearing trade specifications is allowed, provided the printing or labelling has been done with non-toxic ink or glue.Packages must be free of all foreign matter.Stickers individually affixed on product shall be such as, when removed, neither to leave visible traces of glue, nor to lead to skin defects.C.PresentationTomatoes may be presented as follows:(i)as individual fruits, with or without calyx and short stalk;(ii)as trusses of tomatoes, i.e. the tomatoes are presented as whole inflorescence or part thereof, each inflorescence or part thereof comprising at least the following number of fruits:three fruits (two fruits in prepackaging), orin the case of trusses of "cherry" tomatoes, six fruits (four fruits in prepackaging).VI.PROVISIONS CONCERNING MARKINGEach package must bear the following particulars in letters grouped on the same side, legibly and indelibly marked and visible from the outside:A.IdentificationThe name and the address of the packer and/or the dispatcherThis mention may be replaced:for all packages with the exception of pre-packages, by the officially issued or accepted code mark representing the packer and/or the dispatcher, indicated in close connection with the reference "Packer and/or Dispatcher" (or equivalent abbreviations);for pre-packages only, by the name and the address of a seller established within the Community indicated in close connection with the mention "Packed for:" or an equivalent mention. In this case, the labelling shall also include a code representing the packer and/or the dispatcher. The seller shall give all information deemed necessary by the inspection body as to the meaning of this code.B.Nature of produce"tomatoes" or "trusses of tomatoes" and the commercial type if the contents are not visible from the outside. These details must always be provided for "cherry" (or "cocktail") tomatoes, whether or not in trusses,name of the variety (optional).C.Origin of producecountry of origin and, optionally, district where grown, or national, regional or local place name.D.Commercial specificationsclasssize expressed as minimum and maximum diameters (if sized) or the word "unsized" where appropriate.minimum sugar content, measured by refractometer and expressed in Brix degrees (optional).E.Official control mark (optional)Packages need not to bear the particulars mentioned in the first subparagraph, when they contain sales packages, clearly visible from the outside, and all bearing these particulars. These packages shall be free from any indications such as could mislead. When these packages are palletised, the particulars shall be given on a notice placed in an obvious position on at least two sides of the pallet."

----------------------

Due to varietal characteristics of the Fuji variety and its mutants concerning maturity at harvest, radial watercore is permitted provided it is contained within the vascular bundles of each fruit.To that end, they must show satisfactory soluble solids content and degree of firmness.The criteria for colouring and russetting are given in the appendix to this standard, as well as a non-exhaustive list of the varieties concerned by each criteria.The criteria for colouring and russetting are given in the appendix to this standard, as well as a non-exhaustive list of the varieties concerned by each criteria.The criteria for colouring and russetting are given in the appendix to this standard, as well as a non-exhaustive list of the varieties concerned by each criteria.At least 20 % red in Class I and Class II.However, for the variety Jonagold, at least one-tenth surface of the fruit in Class II must be streaked with red colouring.Sizes below 45 mm refer only to clementines.The use of preserving agents or any other chemical substance liable to leave a foreign smell on the skin of the fruit is permitted where it is compatible with the applicable Community provisions.The use of preserving agents or any other chemical substance liable to leave a foreign smell on the skin of the fruit is permitted where it is compatible with the applicable Community provisions.This text applies to all varieties grown from Prunus persica Sieb. and Zucc., being peaches or nectarines or similar with attached (clingstones) or unattached stone and smooth or rough skin.This does not apply when this russeting is a characteristic of the variety.This does not apply when this russeting is a characteristic of the variety.This does not apply when this russeting is a characteristic of the variety.A non-exhaustive list of large fruited and summer pear varieties is included in the Appendix to this standardMiniature product means a variety or cultivar of sweet pepper, obtained by plant breeding and/or special cultivation techniques, excluding sweet peppers of non-miniature varieties which have not fully developed or are of inadequate size. All other requirements of the standard must be met.Only for "oblong" tomatoes.ANNEX II"ANNEX IISPECIMEN MENTIONED IN ARTICLE 11(1)ANNEX III"ANNEX IIICERTIFICATE OF CONFORMITY WITH THE COMMUNITY MARKETING STANDARDS FOR FRESH FRUIT AND VEGETABLES MENTIONED IN ARTICLES 11, 12 AND 12aANNEX IV"ANNEX VIMethods of inspection mentioned in Article 20(1)Remark: the following methods of inspection are based on the provisions of the guide for the implementation of quality control of fresh fruit and vegetables adopted by the OECD Scheme for the Application of International Standards for Fruit and Vegetables.1.DEFINITIONS1.1.PackageIndividually packaged part of a lot, including contents so as to facilitate handling and transport of a number of sales units or of products loose or arranged, in order to prevent damage by physical handling and transport. Road, rail, ship and air containers are not considered as packages.1.2.Sales packageIndividually packaged part of a lot, including contents which is so as to constitute a sales unit to the final user or consumer at the point of purchase.1.2a.Pre-packagesPre-packages are sales packages such as the packaging encloses the foodstuff completely or only partially, but in such a way that the contents cannot be altered without opening or changing the packaging. Protective films covering single produce are not considered as a pre-package.1.3.ConsignmentQuantity of produce to be sold by a given trader found at the time of inspection and defined by a document. A consignment may consist of one or several types of produce; it may contain one or several lots of fresh, dry or dried fruit and vegetables.1.4.LotQuantity of produce which, at the time of inspection at one place, has similar characteristics with regard to:packer and/or dispatchercountry of originnature of produceclass of producesize (if the produce is graded according to size)variety or commercial type (according to the relevant provisions of the standard)type of packaging and presentation.However, if during the conformity check of consignments (as defined in point 1.3), it is difficult to distinguish between different lots and/or presentation of individual lots is not possible, all lots of a specific consignment may be treated as one lot if they are similar in regard to type of produce, dispatcher, country of origin, class and variety or commercial type, if this is provided for in the relevant marketing standard.1.5.SamplingCollective samples taken temporarily from a lot during conformity check.1.6.Primary samplePackage taken at random from the lot, in case of packed produce or, in case of bulk produce (direct loading into a transport vehicle or compartment thereof), a quantity taken at random from a point in the lot.1.7.Bulk sampleSeveral primary samples supposed to be representative for the lot so that the total quantity is sufficient to allow the assessment of the lot with regard to all criteria.1.8.Secondary sampleAn equal quantity of produce taken at random from the primary sample.In the case of packed nuts, the secondary sample shall weigh between 300 g and 1 kg. If the primary sample is made up of packages containing sales packages, the secondary sample shall be one or more sales packages that in aggregate are at least 300 g.In the case of other packed produce, the secondary sample shall comprise 30 units, in case the net weight of the package is 25 kg or less and the package does not contain any sales packages. In certain cases this means that the whole content of the package has to be checked, if the primary sample contains not more than 30 units.1.9.Composite sample (dry and dried produce only)A composite sample is a mix, weighing at least 3 kg, of all the secondary samples taken from the bulk sample. Produce in the composite sample shall be evenly mixed.1.10.Reduced sampleQuantity of produce taken at random from the bulk or composite sample whose size is restricted to the minimum quantity necessary but sufficient to allow the assessment of certain individual criteria.If the inspection method would destroy the produce, the size of the reduced sample shall not exceed 10 % of the bulk sample or, in the case of nuts in shell, 100 nuts taken from the composite sample. In the case of small dry or dried products (i.e. 100 g include more than 100 units) the reduced sample shall not exceed 300 g.For the assessment of criteria on the degree of the development and/or ripeness, the constitution of the sampling shall be done according to the objective methods described in the Guidance on Objective Tests to Determine Quality of Fruit and Vegetables and Dry and Dried Produce (http://www.oecd.org/agr/fv).Several reduced samples may be taken from a bulk or composite sample in order to check the conformity of the lot against different criteria.2.IMPLEMENTATION OF CONFORMITY CHECK2.1.General remarkA conformity check shall be made by assessing samples taken at random from different points in the lot to be controlled. It is based on the principle of presumption that the quality of the samples is representative of the quality of the lot.2.2.Place of controlA conformity check may be carried out during packing operation, at the point of dispatch, during transport, at the point of reception, at whole sale and retail level.In cases where the inspection body does not carry out the conformity check in their own premises, the holder shall provide facilities enabling the conduct of a conformity check.2.3.Identification of lots and/or getting a general impression of the consignmentThe identification of lots shall be carried out on the basis of their marking or other criteria, such as the indications laid down under Council Directive 89/396/EECOJ L 186, 30.6.1989, p. 21.. In the case of consignments which are made up of several lots it is necessary for the inspector to get a general impression of the consignment with the aid of accompanying documents or declarations concerning the consignments. The inspector shall then determine how far the lots presented comply with the information in these documents.If the produce is to be or has been loaded onto a means of transport, the registration number of the latter shall be used for identification of the consignment.2.4.Presentation of produceThe inspector shall decide which packages are to be checked. The presentation shall be made by the operator and shall include the presentation of the bulk sample as well as the supply of all information necessary for the identification of the consignment or lot.If reduced or secondary samples are required, these shall be identified by the inspector from the bulk sample.2.5.Physical checkAssessment of packaging and presentation:The packaging, including the material used within the package, shall be tested for suitability and cleanness according to the provisions of the relevant marketing standard. This shall be done on the basis of primary samples, in case of packed produce and in all other cases on the basis of the transport vehicle. If only certain types of packaging or presentation are permitted, the inspector shall check whether these are being used.Verification of marking:The inspector shall check whether the produce is marked according to the relevant marketing standard. This shall include a check on the accuracy of marking and/or the extent of any amendments required.In case of packed produce, this check shall be carried out on the basis of the primary samples, in all other cases on the basis of the documents attached to the pallet or the transport vehicle.Fruit and vegetables individually wrapped in plastic shall not be considered as pre-packed foodstuff in the meaning of European Parliament and Council Directive 2000/13/EC and shall not necessarily need to be marked in accordance with the marketing standards. In such cases, the plastic wrapping may be considered as a simple protection for fragile products.Verification of conformity of the produce:The inspector shall determine the size of the bulk sample in such way as to be able to assess the lot. The inspector selects at random the packages to be inspected or in the case of bulk produce the points of the lot from which individual samples shall be taken.Care shall be taken to ensure that the removal of samples does not adversely affect the quality of the produce.Damaged packages shall not be used as part of the bulk sample. They shall be set aside and may, if necessary, be subject to a separate examination and report.The bulk sample shall comprise the following minimum quantities whenever a lot is declared unsatisfactory or the risk of a produce not conforming to the marketing standard has to be examined:

Packed produce
Number of packages in the lot	Number of packages to be taken (primary samples)
Up to 100	5
From 101 to 300	7
From 301 to 500	9
From 501 to 1000	10
More than 1000	15 (minimum)

Produce in bulk(direct loading into a transport vehicle or compartment thereof)
Quantity of lot in kg or number of bundles in the lot	Quantity of primary samples in kg or number of bundles
Up to 200	10
From 201 to 500	20
From 501 to 1000	30
From 1001 to 5000	60
More than 5000	100 (minimum)

In the case of bulky fruit and vegetables (over 2 kg per unit), the primary samples shall be made up of at least five units. In the case of lots comprising fewer than 5 packages or weighing less than 10 kg, the check shall cover the entire lot.If the inspector discovers, after an inspection, that a decision cannot be reached, another physical check shall be undertaken and the overall result reported as an average of the two checks.2.6.Control of produceIn case of packed produce, the primary samples shall be used to check the general appearance of the produce, the presentation, the cleanliness of the packages and the labelling. In all other cases, these checks shall be done on basis of the lot or transport vehicle.The produce shall be removed entirely from its packaging for the conformity check. The inspector may only dispense with this where the sampling is based on composite samples.The inspection of uniformity, minimum requirements, quality classes and size shall be carried out on the basis of the bulk sample, or on the basis of the composite sample taking into account the explanatory brochures published by the OECD Scheme for the Application of International Standards for Fruit and Vegetables (http://www.oecd.org/agr/fv).When defects are detected, the inspector shall ascertain the respective percentage of the produce not in conformity with the standard by number or weight.External defects shall be checked on the basis of the bulk or composite sample. Certain criteria on the degree of development and/or ripeness or on the presence or absence of internal defects may be checked on the basis of reduced samples. The check based on the reduced sample applies in particular to checks which destroy the trade value of the produce.The criteria on the degree of development and/or ripeness shall be checked using the instruments and methods laid down to this end in the relevant marketing standard or in accordance with the Guidance on Objective Tests to Determine Quality of Fruit and Vegetables and Dry and Dried Produce (http://www.oecd.org/agr/fv).2.7.Report of control resultsDocuments mentioned in Article 12a shall be issued where appropriate.If defects are found leading to non conformity, the trader or his representative shall be informed in writing about these defects and the percentage found as well as the reasons for non-conformity. If the compliance of produce with the standard is possible by a change in marking, the trader or his representative shall be informed.If defects are found in a product, the percentage found not to be in conformity with the standard shall be indicated.2.8.Decline in value by conformity checkAfter the conformity check, the bulk/composite sample is put at the disposal of the operator or his representative.The inspection body shall not be bound to hand back the elements of the bulk/composite sample destroyed during the conformity check."

----------------------

OJ L 186, 30.6.1989, p. 21.