Commission Regulation (EC) No 1107/2008 of 7 November 2008 amending Regulation (EC) No 2003/2003 of the European Parliament and of the Council relating to fertilisers for the purposes of adapting Annexes I and IV thereto to technical progress (Text with EEA relevance)
(1) in Table A.1, the entry for fertiliser type 4 "sulphate of ammonia" is replaced by the following: "4 Sulphate of ammonia Chemically obtained product containing ammonium sulphate as its essential ingredient, possibly with up to 15 % calcium nitrate (nitrate of lime). 19,7 % N Nitrogen expressed as total nitrogen. Maximum content of nitric nitrogen 2,2 % N if calcium nitrate (nitrate of lime) is added. When marketed in the form of a combination of ammonium sulphate and calcium nitrate (nitrate of lime), the designation must include "with up to 15 % calcium nitrate (nitrate of lime)". Ammoniacal nitrogen. Total nitrogen if calcium nitrate (nitrate of lime) is added" (2) in Table A.1, the entries for fertiliser types 16, 17 and footnote (a) are deleted. Type 18 becomes type 16: (3) the following Section F is added: "F. Nitrification and urease inhibitors The urease and nitrification inhibitors listed in the Tables F.1. and F.2. below may be added to the nitrogenous fertilisers types listed in Sections A.1., B.1., B.2., B.3., C.1. and C.2. of Annex I subject to the following provisions: (1) at least 50 % of the total nitrogen content of the fertiliser consists of the nitrogen forms specified in column 3; (2) they do not belong to the fertiliser types mentioned in column 4.
Fertilisers to which a nitrification inhibitor listed in Table F.1. has been added shall have the words "with nitrification inhibitor ([type designation of nitrification inhibitor])" added to their type designation. Fertilisers to which a urease inhibitor listed in Table F.2. has been added shall have the words "with urease inhibitor ([type designation of urease inhibitor])" added to their type designation. Technical information, as complete as possible, must be provided with each package or bulk consignment by the person responsible for marketing. This information must enable the user in particular to determine the rates and timing of application in relation to the crop being grown. New nitrification inhibitors or urease inhibitors may be included in the Tables F1 or F2 respectively after evaluation of the technical files submitted in accordance with guidelines to be elaborated for these compounds. F.1. Nitrification inhibitors No Type designation and composition of the nitrification inhibitor Minimum and maximum inhibitor content as a percentage by mass of the total nitrogen present as ammonium nitrogen and urea nitrogen. EC fertiliser types for which the inhibitor may not be used Description of nitrification inhibitors with which mixtures are allowed Data on permitted ratio 1 2 3 4 5 1 Dicyandiamide ELINCS No 207-312-8 Minimum 2,25 Maximum 4,5 F.2. Urease inhibitors No Type designation and composition of the urease inhibitor Minimum and maximum inhibitor content as a percentage by mass of the total nitrogen present as urea nitrogen EC fertiliser types for which the inhibitor may not be used Description of urease inhibitors with which mixtures are allowed Data on permitted ratio 1 2 3 4 5 1 N-(n-butyl) thiophosphoric triamide (NBPT) ELINCS No 435-740-7 Minimum 0,09 Maximum 0,20"
(1) in the note in point 4.11. of Method 2.3.2, the second, third and fourth subparagraphs are replaced by the following: "Titrate with 0,05 mol/l iodine (I 2 ) solution in the presence of a starch solution as an indicator.1 ml of iodine (I 2 ) solution 0,05 mol/l corresponds to 0,01128 g of SnCl2 ·2H2 O.At least 80 % of the total tin present in the solution thus prepared must be in a bivalent form. For the titration at least 35 ml of 0,05 mol/l iodine (I 2 ) solution must be used."(2) in the note in point 4.11. of Method 2.6.1, the second, third and fourth subparagraphs are replaced by the following: "Titrate with 0,05 mol/l iodine (I 2 ) solution in the presence of a starch solution as an indicator.1 ml of iodine (I 2 ) solution 0,05 mol/l corresponds to 0,01128 g of SnCl2 ·2H2 O.At least 80 % of the total tin present in the solution thus prepared must be in a bivalent form. For the titration at least 35 ml of 0,05 mol/l iodine (I 2 ) solution must be used."