Council Regulation (EC) No 655/2006 of 27 April 2006 extending the definitive anti-dumping duty imposed by Regulation (EC) No 964/2003 on imports of tube or pipe fittings, of iron or steel, originating in the People's Republic of China to imports of tube or pipe fittings, of iron or steel, consigned from the Philippines, whether declared as originating in the Philippines or not
Council Regulation (EC) No 655/2006of 27 April 2006extending the definitive anti-dumping duty imposed by Regulation (EC) No 964/2003 on imports of tube or pipe fittings, of iron or steel, originating in the People's Republic of China to imports of tube or pipe fittings, of iron or steel, consigned from the Philippines, whether declared as originating in the Philippines or not THE COUNCIL OF THE EUROPEAN UNION,Having regard to the Treaty establishing the European Community,Having regard to Council Regulation (EC) No 384/96 of 22 December 1995 on protection against dumped imports from countries not members of the European CommunityOJ L 56, 6.3.1996, p. 1. Regulation as last amended by Regulation (EC) No 2117/2005 (OJ L 340, 23.12.2005, p. 17). (the basic Regulation) and in particular Article 13 thereof,Having regard to the proposal submitted by the Commission after consulting the Advisory Committee,Whereas:A.PROCEDURE1.Existing measures(1)Following an expiry review, by Regulation (EC) No 964/2003OJ L 139, 6.6.2003, p. 1. (the original Regulation), the Council imposed definitive anti-dumping duties of 58,6 % on imports of tube or pipe fittings (other than cast fittings, flanges and threaded fittings) of iron or steel (not including stainless steel) with a greatest external diameter not exceeding 609,6 mm, of a kind used for butt-welding or other purposes (tube or pipe fittings or the product concerned), originating, inter alia, in the People's Republic of China (the PRC) and extended the measures to imports of the same fittings consigned from Taiwan, with the exception of those produced by three specific Taiwanese companies.(2)In December 2004, by Regulations (EC) No 2052/2004 and No 2053/2004, the Council extended the above-mentioned definitive anti-dumping duties to imports of the same tube or pipe fittings consigned from IndonesiaOJ L 355, 1.12.2004, p. 4. and Sri LankaOJ L 355, 1.12.2004, p. 9. respectively.2.Request(3)On 23 June 2005, the Commission received a request pursuant to Article 13(3) of the basic Regulation to investigate the alleged circumvention of the anti-dumping measures imposed on imports of tube or pipe fittings originating in the PRC by means of the transhipment and incorrect declaration of origin via the Philippines. The request was submitted by the Defence Committee of the Steel Butt-Welding Fittings Industry of the European Union on behalf of four Community producers, representing a major proportion of the Community production of certain tube and pipe fittings.(4)The request alleged and submitted sufficient prima facie evidence that there had been a change in the pattern of trade following the imposition of the anti-dumping measures on imports of tube or pipe fittings originating in the PRC, as shown by a significant increase in imports of the same product from the Philippines.(5)This change in the pattern of trade was alleged to stem from the transhipment of tube or pipe fittings originating in the PRC via the Philippines. It was further alleged that there was insufficient due cause or economic justification for these practices other than the existence of the anti-dumping duties on tube or pipe fittings originating in the PRC.(6)Finally, the applicant alleged and submitted prima facie evidence showing that the remedial effects of the existing anti-dumping duties on tube or pipe fittings originating in the PRC were being undermined both in terms of quantities and prices and that dumping was taking place in relation to the normal values previously established for the tube or pipe fittings originating in the PRC.3.Initiation(7)By Regulation (EC) No 1288/2005OJ L 204, 5.8.2005, p. 3. (the initiating Regulation), the Commission initiated an investigation into the alleged circumvention of the anti-dumping measures imposed on imports of tube or pipe fittings originating in the PRC by imports of tube or pipe fittings consigned from the Philippines, whether declared as originating in the Philippines or not and, pursuant to Articles 13(3) and 14(5) of the basic Regulation, directed the customs authorities to register imports into the Community of tube or pipe fittings consigned from the Philippines, whether declared as originating in the Philippines or not, as from 6 August 2005.4.Investigation(8)The Commission officially advised the authorities of the PRC and of the Philippines, the producers/exporters and the importers in the Community known to be concerned as well as the Community industry of the initiation of the investigation. Questionnaires were sent to producers/exporters in the PRC and in the Philippines as well as to importers in the Community named in the request or known to the Commission from the investigation which lead to the imposition of the existing measures on imports of tube or pipe fittings originating in the PRC (the original investigation). Interested parties were given the opportunity to make their views known in writing and to request a hearing within the time limit set in the initiating Regulation. All parties were informed that non-cooperation might lead to the application of Article 18 of the basic Regulation and to findings being made on the basis of facts available.(9)No questionnaire replies were received from exporters/producers in the Philippines, even though the authorities of the Philippines had contacted several companies possibly involved in producing tube or pipe fittings. Moreover, no questionnaire replies were received from exporters/producers in the PRC.(10)Two importers in the Community cooperated and submitted replies to the questionnaire.(11)Verification visits took place at the premises of the following companies:ImportersValvorobica Industriale SpA, Italy,General Commercial & Industrial SA, Greece.5.Investigation period(12)The investigation period covered the period from 1 July 2004 to 30 June 2005 (the IP). Data were collected from 2001 up to the end of the IP to investigate the alleged change in the pattern of trade.B.RESULTS OF THE INVESTIGATION1.General considerations/degree of cooperation(13)As mentioned in recital 9, no producer/exporter in the PRC or the Philippines cooperated in the investigation. Three Philippine companies came forward and stated that they did not produce nor export the tube or pipe fittings as defined in the original Regulation, but only stainless steel fittings, a product which is not covered by the current investigation. Accordingly, findings in respect of tube or pipe fittings consigned from the Philippines to the Community had partially to be based on facts available in accordance with Article 18 of the basic Regulation.2.Product concerned and like product(14)The product concerned by the alleged circumvention is, as defined in the original investigation, tube or pipe fittings (other than cast fittings, flanges and threaded fittings) of iron or steel (not including stainless steel), with a greatest external diameter not exceeding 609,6 mm, of a kind used for butt-welding or other purposes, currently classifiable within CN codes ex73079311 (TARIC code 7307931195), ex73079319 (TARIC code 7307931995), ex73079930 (TARIC code 7307993095) and ex73079990 (TARIC code 7307999095), originating in the PRC.(15)On the basis of the information available and the data supplied by the Philippine authorities and considering the change in the pattern of trade as described in the following section, it must be inferred, in the absence of any contrary evidence, that the tube or pipe fittings exported to the Community from the PRC and those consigned from the Philippines to the Community have the same basic physical and chemical characteristics and have the same uses. They are therefore to be considered as like products within the meaning of Article 1(4) of the basic Regulation.3.Change in the pattern of trade(16)Due to the non-cooperation of any Philippine company, the volume and the value of exports of the like product from the Philippines to the Community had to be established on the basis of the facts available pursuant to Article 18 of the basic Regulation. Eurostat data were the most appropriate information available and were therefore used to establish the export quantities and prices from the Philippines to the Community.
Imports into the CommunitySource: Eurostat.
(in tonnes)
2001200220032004IP
Philippines0370024452941
The PRC132477267711531411
Indonesia0983129400
Sri Lanka0332302390
Total EU imports1742215111160851605018900
(17)As this table shows, imports of tube or pipe fittings from the Philippines into the Community increased from 0 tonnes in 2001 to almost 3000 tonnes during the IP. The imports from the Philippines commenced in 2002, at a time when the original investigation was ongoing. In 2003, however the imports from the Philippines increased significantly to 700 tonnes. In 2004, imports from the Philippines to the Community more than tripled to 2445 tonnes. It should be noted that following the extension of the original anti-dumping measures to imports of the like product consigned from Indonesia and Sri Lanka in December 2004, imports from these countries came to a complete stop. This complete halt of imports from Indonesia and Sri Lanka to the Community in 2004 coincided with the most substantial increase of imports from the Philippines.(18)At the same time, exports from the PRC to the Philippines remained at a low but stable level.
Exports from the PRC to the PhilippinesSource: Chinese export statistics.
(in tonnes)
2001200220032004IP
Philippines466604402643694
(19)It must be noted, however, that the data used to establish the change in the pattern of trade, with special regard to those relating to exports from the PRC to the Philippines, should be seen in the light of the likelihood of false declarations of origin (see recital 22) and might therefore not give a complete picture of the situation.(20)From the figures shown above, it is concluded that there has been a clear change in the pattern of trade which started after the conclusion of the original investigation and became apparent after the extension of the measures to imports of the like product from Indonesia and Sri Lanka. The pattern consisted of a sharp increase of imports of tube or pipe fittings from the Philippines into the Community, especially in 2004 and the IP, coinciding with a stop of imports from the two countries to which the original measures were extended.(21)It is clear from the above that due to the coincidence in time the Chinese exports transhipped via Indonesia and Sri Lanka have been redirected at least partly via the Philippines when the original anti-dumping measures were extended to imports from Indonesia and Sri Lanka. This was the case in particular during the year 2004 and during the IP.4.Insufficient due cause or economic justification(22)As already mentioned in recital 9, no Philippine producer/exporter cooperated in the investigation. Indeed, no evidence has been found during the investigation that any such producer would actually exist. Moreover, evidence collected during the investigation shows that tubes or pipe fittings have been in some cases declared as produced by Philippine companies that have submitted never having been involved in the manufacturing of the like product. This is corroborated by the information contained in the request for the initiation of anti-circumvention investigation, e.g. offers to potential importers containing the proposal of falsifying the documents of origin.(23)From the information referred to in recitals 17 and 20, it can be concluded that exports of tubes or pipes fittings produced in the PRC and channelled to the Community through Indonesia and Sri Lanka during the years 2002 until 2004 have been redirected to a large extent via the Philippines, starting in the year 2003 and continuing until the end of IP.(24)Moreover, although the volume of imports of the product concerned from the PRC to the Philippines did by far not reach the increase of imports consigned from the Philippines to the Community (see recital 18), the steep increase of exports from the Philippines to the Community also has to be seen in the light of the evidence found concerning false declarations or falsification of certificates of origin (see recital 22), the lack of genuine Philippine producers of tube or pipe fittings and the decrease of exports from Sri Lanka and Indonesia to the Community. It is the totality of these elements which explain the absence of an economic justification for the change in the pattern of trade observed.(25)In the absence of cooperation by any exporting producer in the Philippines and the PRC and of any contrary evidence, it is therefore concluded that, given the coincidence in time with the investigations which lead to the extension of the original measures to imports from Indonesia and Sri Lanka, the change in the pattern of trade stemmed from the existence of the anti-dumping duty rather than from any other sufficient due cause or economic justification within the meaning of Article 13(1), third sentence of the basic Regulation.5.Undermining of the remedial effects of the duty in terms of the prices and/or the quantities of the like product(26)Based on the trade flow analysis made in recital 17, a clear quantitative change in the pattern of Community imports of tube or pipe fittings occurred. Imports declared as originating in the Philippines were negligible on the Community market until June 2003. After the said date imports declared as originating in the Philippines suddenly emerged and increased rapidly to 2941 tonnes during the IP. This volume represents 3 % of the Community consumption calculated on production figures submitted by the applicants and imports based on Eurostat data. It is therefore clear that the marked change in trade flows undermined the remedial effects of the anti-dumping measures in terms of the quantities imported into the Community market.(27)With regard to prices of the products consigned from the Philippines and in the absence of cooperation and of any contrary evidence, Eurostat data show that average export prices of imports from the Philippines during the IP were lower than the average export prices established for the PRC in the original investigation. It has been established that prices of imports from the Philippines are around one third lower than those of imports originating in the PRC both during 2004 and the IP. Moreover, it was found that the average export prices of the Philippine exports to the Community were below the injury elimination level of Community prices as established in the original investigation. Hence, the remedial effects of the anti-dumping duty imposed are undermined in terms of prices. Detailed information can be found in the table below:
(EUR/kg)
2004IP
Philippines0,971,07
PRC1,571,50
Difference– 38 %– 29 %
(28)On the basis of the above, it is concluded that the change in trade flows, together with the substantial increase in imports made at very low prices from the Philippines have undermined the remedial effects of the anti-dumping measures in terms of both quantities and prices of the like product.6.Evidence of dumping in relation to the normal values previously established for the like product(29)In order to determine whether evidence of dumping could be found with respect to the product concerned exported to the Community from the Philippines during the IP, export prices established on the basis of Eurostat data were used pursuant to Article 18 of the basic Regulation.(30)In accordance with Article 13(1) of the basic Regulation, these export prices were compared with the normal value previously established for the like product. In the original investigation, Thailand was found to be an appropriate market economy analogue country for the PRC for the purpose of establishing normal value.(31)For the purpose of a fair comparison between the normal value and the export price, due allowance, in the form of adjustments, was made for differences which affect prices and price comparability. These adjustments were made in accordance with Article 2(10) of the basic Regulation in respect of transport costs, on the basis of the information contained in the request.(32)In accordance with Article 2(11) of the basic Regulation, the comparison of a weighted average normal value as established in the original investigation and the weighted average of export prices during this investigation’s IP, expressed as a percentage of the cif price at the Community frontier, duty unpaid, showed dumping for the imports of tube or pipe fittings consigned from the Philippines. The dumping margin found, expressed as a percentage of the cif price at the Community frontier, duty unpaid, was in excess of 60 %.C.MEASURES(33)In view of the above finding of circumvention within the meaning of Article 13(1), third sentence of the basic Regulation and in accordance with Article 13(1), first sentence of the basic Regulation, the existing anti-dumping measures on imports of the product concerned originating in the PRC should be extended to imports of the same product consigned from the Philippines, whether declared as originating in the Philippines or not.(34)The duty extended should be the one established in Article 1(2) of the original Regulation.(35)In accordance with Articles 13(3) and 14(5) of the basic Regulation, which provides that any extended measures shall be applied on registered imports from the date of registration, the anti-dumping duty should be collected on imports of tube or pipe fittings consigned from the Philippines which entered the Community under registration imposed by the initiating Regulation.(36)Although during this investigation no genuine exporting producer of tube or pipe fittings was found to exist in the Philippines or made itself known to the Commission, new exporting producers which would consider lodging a request for an exemption from the extended anti-dumping duty pursuant to Article 13(4) of the basic Regulation will be required to complete a questionnaire in order to enable the Commission to determine whether an exemption may be warranted. Such exemption may be granted after the assessment of, for instance, the market situation of the product concerned, production capacity and capacity utilisation, procurement and sales, the likelihood of continuation of practices for which there is insufficient due cause or economic justification and the evidence of dumping. The Commission would normally also carry out an on-the-spot verification visit. The request would have to be addressed to the Commission forthwith, with all relevant information, in particular any modification in the company's activities linked to production and sales.(37)Importers could still benefit from exemption for registration or measures to the extent that their imports are from exporting producers, which are granted such an exemption, and in accordance with Article 13(4) of the basic Regulation.(38)Where an exemption is warranted, the Commission will, after consultation of the Advisory Committee, propose the amendment of this Regulation accordingly. Subsequently, any exemptions granted will be monitored to ensure compliance with the conditions set therein.D.PROCEDURE(39)Interested parties were informed of the essential facts and considerations on the basis of which the Council intended to extend the definitive anti-dumping duty in force and were given the opportunity to comment. No comments which were of a nature to change the above-mentioned conclusions were received,HAS ADOPTED THIS REGULATION:
Article 11.The definitive anti-dumping duty imposed by Regulation (EC) No 964/2003 on imports of tube or pipe fittings (other than cast fittings, flanges and threaded fittings), of iron or steel (not including stainless steel), with a greatest external diameter not exceeding 609,6 mm, of a kind used for butt-welding or other purposes, falling within CN codes ex73079311 (TARIC code 7307931199), ex73079319 (TARIC code 7307931999), ex73079930 (TARIC code 7307993098) and ex73079990 (TARIC code 7307999098) and originating in the People’s Republic of China is hereby extended to imports of tube or pipe fittings (other than cast fittings, flanges and threaded fittings), of iron or steel (not including stainless steel), with a greatest external diameter not exceeding 609,6 mm, of a kind used for butt-welding or other purposes falling within CN codes ex73079311 (TARIC code 7307931195), ex73079319 (TARIC code 7307931995), ex73079930 (TARIC code 7307993095) and ex73079990 (TARIC code 7307999095) consigned from the Philippines, whether declared as originating in the Philippines or not.2.The duty extended by paragraph 1 of this Article shall be collected on imports registered in accordance with Article 2 of Regulation (EC) No 1288/2005 and Articles 13(3) and 14(5) of Regulation (EC) No 384/96.3.The provisions in force concerning customs duties shall apply.
Article 21.Requests for exemption from the duty extended by Article 1 shall be made in writing in one of the official languages of the European Union must be signed by a person authorised to represent the applicant. The request shall be sent to the following address:European CommissionDirectorate-General for TradeDirectorate BJ-79 5/16B-1049 BrusselsFax (32 2) 295 65 05.2.The Commission, after consulting the Advisory Committee, may authorise, by decision, the exemption of imports from companies which do not circumvent the anti-dumping measures imposed by Regulation (EC) No 964/2003 from the duty extended by Article 1, and propose the amendment of this Regulation accordingly.
Article 3Customs authorities are hereby directed to discontinue the registration of imports established in accordance with Article 2 of Regulation (EC) No 1288/2005.
Article 4This Regulation shall enter into force on the day following its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.Done at Luxembourg, 27 April 2006.For the CouncilThe PresidentL. Prokop