| CN code |
TARIC |
Description |
Rate of autonomous duty |
Validity period |
| *ex03026999 |
30 |
Red snapper (Lutjanus purpureus), fresh, chilled, for processing |
0 % |
31.12.2013 |
| *ex03027000ex03038090 |
8919 |
Hard fish roes, fresh, chilled or frozen |
0 % |
31.12.2013 |
| *ex03042961ex03049999 |
1031 |
Fillets and meat of dogfish (Squalus acanthias), frozen |
6 % |
31.12.2013 |
| *ex03052000ex03052000 |
1130 |
Hard fish roes, salted or in brine |
0 % |
31.12.2013 |
| *ex07102100 |
10 |
Peas in pods, of the species Pisum sativum of the variety Hortense axiphium, frozen, of a thickness of not more than 6 mm, to be used, in their pods, in the manufacture of prepared meals |
0 % |
31.12.2013 |
| *ex07108095 |
50 |
Bamboo shoots, frozen, not put up for retail sale |
0 % |
31.12.2013 |
| *ex07115900 |
11 |
Mushrooms, excluding mushrooms of the genera Agaricus, Calocybe, Clitocybe, Lepista, Leucoagaricus, Leucopaxillus, Lyophyllum and Tricholoma, provisionally preserved in brine, in sulphur water, or in other preservative solutions, but unsuitable in that state for immediate consumption, for the food-canning industry |
0 % |
31.12.2011 |
| *ex07123200ex07123300ex07123900 |
101031 |
Mushrooms, excluding mushrooms of the genus Agaricus, dried, whole or in identifiable slices or pieces, for treatment other than simple repacking for retail sale |
0 % |
31.12.2013 |
| *ex08041000 |
10 |
Dates, fresh or dried, not put up for retail sale |
0 % |
31.12.2013 |
| *ex08104050 |
10 |
Fruit of the species Vaccinium macrocarpon, fresh |
0 % |
31.12.2013 |
| *0811905008119070ex08119095 |
69 |
Fruit of the genus Vaccinium, uncooked or cooked by steaming or boiling in water, frozen, not containing added sugar or other sweetening matter |
0 % |
31.12.2013 |
| *ex08119095 |
20 |
Boysenberries, frozen, not containing added sugar, not put up for retail sale |
0 % |
31.12.2013 |
| *ex08119095 |
30 |
Pineapple (Ananas comosus), in pieces, frozen |
0 % |
31.12.2013 |
| *ex08119095 |
40 |
Rose-hips, uncooked or cooked by steaming or boiling in water, frozen, not containing added sugar or other sweetening matter |
0 % |
31.12.2013 |
| *ex15119019ex15119091ex15131110ex15131930ex15132110ex15132930 |
101010101010 |
Palm oil, coconut (copra) oil, palm kernel oil, for the manufacture of:-
industrial monocarboxylic fatty acids of subheading 38231910,
- mixtures of methyl esters of fatty acids of subheading 38249091,
- methyl esters of fatty acids of heading 2915 or 2916,
- stearic acid of subheading 38231100 or
- goods of heading No 3401
|
0 % |
31.12.2013 |
| *ex15159099 |
92 |
Vegetable oil, refined, containing by weight 35 % or more but not more than 50 % of arachidonic acid or 35 % or more but not more than 50 % of docosahexaenoic acid |
0 % |
31.12.2013 |
| ex15179099 |
10 |
Vegetable oil, refined, containing by weight 35 % or more but not more than 50 % arachidonic acid or 35 % or more but not more than 50 % docosahexaenoic acid and standardized with high oleic sunflower oil (HOSO) |
0 % |
31.12.2011 |
| *ex16041100 |
20 |
Pacific salmon (Oncorhynchus spp.), for the processing industry for manufacture into pastes or spreads |
0 % |
31.12.2013 |
| *ex16043090 |
10 |
Hard fish roes, washed, cleaned of adherent organs and simply salted or in brine, for processing |
0 % |
31.12.2013 |
| *ex16051000ex16051000 |
1119 |
Crabs of the species "King" (Paralithodes camchaticus), "Hanasaki" (Paralithodes brevipes), "Kegani" (Erimacrus isenbecki), "Queen" and "Snow" (Chionoecetes spp.), "Red" (Geryon quinquedens), "Rough stone" (Neolithodes asperrimus), Lithodes santolla, "Mud" (Scylla serrata), "Blue" (Portunus spp.), simply boiled in water and shelled, whether or not frozen, in immediate packings of a net content of 2 kg or more |
0 % |
31.12.2013 |
| *ex19023010ex19030000 |
1020 |
Transparent noodles, cut in pieces, obtained from beans (Vigna radiata (L.) Wilczek), not put up for retail sale |
0 % |
31.12.2013 |
| *ex20059100 |
10 |
Bamboo shoots, prepared or preserved, in immediate packings of a net content of more than 5 kg |
0 % |
31.12.2013 |
| ex20086019ex20086039 |
3030 |
Sweet cherries containing added spirit, whether or not with a sugar content of 9 % by weight, of a diameter of not more than 19,9 mm, with stone, for use in chocolate products |
10 % |
31.12.2012 |
| ex20098079 |
87 |
Frozen boysenberry juice concentrate with a Brix value of 61 or more, but not more than 65 |
0 % |
31.12.2011 |
| ex20098099 |
93 |
Untreated frozen coconut water, not put up for retail sale |
0 % |
31.12.2011 |
| *ex21061020 |
10 |
Soya protein isolate, containing by weight 6,6 % or more but not more than 8,6 % of calcium phosphate |
0 % |
31.12.2013 |
| *ex27101125 |
10 |
Mixture of isomers 2.4,4-trimethylpent-1-ene and 2.4,4-trimethylpent-2-ene |
0 % |
31.12.2013 |
| *ex28047000 |
10 |
Yellow phosphorus |
0 % |
31.12.2013 |
| *ex28053010 |
10 |
Alloy of cerium and other rare-earth metals, containing by weight 47 % or more of cerium |
0 % |
31.12.2013 |
| *ex28053090 |
10 |
Lanthanum of a purity by weight of 99 % or more |
0 % |
31.12.2013 |
| *ex28111980 |
10 |
Sulphamidic acid |
0 % |
31.12.2013 |
| *ex28112200 |
10 |
Silicon dioxide in the form of powder, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges |
0 % |
31.12.2013 |
| ex28112200 |
20 |
Microspheres of amorphous silicon of a particle size of 5 μm (± 1 μm), for use in the manufacture of cosmetic products |
0 % |
31.12.2011 |
| ex28112200 |
30 |
Balls of porous white silica of a particle size of more than 1 μm for use in the manufacture of cosmetic products |
0 % |
31.12.2011 |
| *ex28129000 |
10 |
Nitrogen trifluoride |
0 % |
31.12.2013 |
| *ex28129000 |
20 |
Silicon tetrafluoride |
0 % |
31.12.2013 |
| *ex28183000 |
10 |
Aluminium hydroxide oxide in the form of pseudo-boehmite |
4 % |
31.12.2013 |
| 28191000 |
|
Chromium trioxide |
0 % |
31.12.2011 |
| *ex28230000 |
10 |
Titanium dioxide, of a purity by weight of 99,9 % or more, with an average grain-size of 1,2 μm or more but not more than 1,8 μm, for the manufacture of goods of heading No 8532 or 8533 |
0 % |
31.12.2013 |
| *ex28255000 |
10 |
Copper (I or II) oxide containing by weight 78 % or more of copper and not more than 0,03 % of chloride |
0 % |
31.12.2013 |
| *ex28273985 |
10 |
Copper monochloride of a purity by weight of 96 % or more but not more than 99 % |
0 % |
31.12.2013 |
| *ex28273985 |
20 |
Antimony pentachloride of a purity by weight of 99 % or more |
0 % |
31.12.2011 |
| *ex28274990 |
10 |
Hydrated zirconium dichloride oxide |
0 % |
31.12.2013 |
| *ex28301000 |
10 |
Disodium tetrasulphide, containing by weight 38 % or less of sodium calculated on the dry weight |
0 % |
31.12.2013 |
| *ex28332980 |
10 |
Manganese sulphate monohydrate |
0 % |
31.12.2013 |
| ex28351000 |
10 |
Sodium hypophosphite monohydrate |
0 % |
31.12.2012 |
| *ex28369100 |
20 |
Lithium carbonate, containing one or more of the following impurities at the concentrations indicated:-
2 mg/kg or more of arsenic,
- 200 mg/kg or more of calcium,
- 200 mg/kg or more of chlorides,
- 20 mg/kg or more of iron,
- 150 mg/kg or more of magnesium,
- 20 mg/kg or more of heavy metals,
- 300 mg/kg or more of potassium,
- 300 mg/kg or more of sodium,
- 200 mg/kg or more of sulphates,
determined according to the methods specified in the European Pharmacopœia |
0 % |
31.12.2013 |
| *ex28369917 |
10 |
Zirconium (IV) basic carbonate |
0 % |
31.12.2013 |
| *ex28371900 |
20 |
Copper cyanide |
0 % |
31.12.2013 |
| ex28372000 |
10 |
Tetrasodium hexacyanoferrate (II) |
0 % |
31.12.2011 |
| ex28391900 |
10 |
Disodium disilicate |
0 % |
31.12.2012 |
| *ex28399090 |
10 |
Lead silicate hydrate, of a lead content by weight of (84,5 ± 1,5) %, evaluated as lead monoxide, in the form of powder |
0 % |
31.12.2013 |
| *ex28399090 |
20 |
Calcium silicate |
0 % |
31.12.2013 |
| 28413000 |
|
Sodium dichromate |
0 % |
31.12.2013 |
| ex28418000 |
10 |
Diammonium wolframate (ammonium paratungstate) |
0 % |
31.12.2012 |
| ex28419085 |
10 |
Lithium cobalt(III) oxide with a cobalt content of at least 59 % |
0 % |
31.12.2012 |
| *ex28421000 |
10 |
Synthetic Beta Zeolite powder |
0 % |
31.12.2013 |
| ex28432900 |
10 |
Silver oxide, nitrate- and carbonate-free, with a silver content of at least 99,99 % by weight of the metal content, for the manufacture of silver oxide batteries |
0 % |
31.12.2011 |
| *28451000 |
|
Heavy water (deuterium oxide) (Euratom) |
0 % |
31.12.2013 |
| *28459010 |
|
Deuterium and compounds thereof; hydrogen and compounds thereof, enriched in deuterium; mixtures and solutions containing these products (Euratom) |
0 % |
31.12.2013 |
| ex28459090 |
10 |
Helium-3 |
0 % |
31.12.2011 |
| *ex28459090 |
20 |
Water enriched at a level of 95 % or more by weight with oxygen-18 |
0 % |
31.12.2013 |
| ex28459090 |
30 |
Carbon monoxide 13C |
0 % |
31.12.2011 |
| *ex28459090 |
40 |
Iron boride enriched at a level of more than 95 % by weight with boron-10 |
0 % |
31.12.2013 |
| *ex28461000ex38249097 |
1048 |
Rare-earth concentrate containing by weight 60 % or more but not more than 95 % of rare-earth oxides and not more than 1 % each of zirconium oxide, aluminium oxide or iron oxide, and having a loss on ignition of 5 % or more by weight |
0 % |
31.12.2013 |
| *ex28461000 |
20 |
Dicerium tricarbonate, whether or not hydrated |
0 % |
31.12.2013 |
| *ex28461000 |
30 |
Cerium lanthanum carbonate, whether or not hydrated |
0 % |
31.12.2013 |
| *ex28461000 |
40 |
Cerium lanthanum neodymium praseodymium carbonate, whether or not hydrated |
0 % |
31.12.2013 |
| *28469000 |
|
Compounds, inorganic or organic, of rare-earth metals, of yttrium or of scandium or of mixtures of these metals, other than those of subheading 28461000 |
0 % |
31.12.2013 |
| *ex28480000 |
10 |
Phosphine |
0 % |
31.12.2013 |
| *ex28500020 |
10 |
Silane |
0 % |
31.12.2013 |
| *ex28500020 |
20 |
Arsine |
0 % |
31.12.2013 |
| ex28500020 |
30 |
Titanium nitride with a particle size of not more than 250 nm |
0 % |
31.12.2012 |
| *ex28500060 |
10 |
Sodium azide |
0 % |
31.12.2013 |
| *ex29033990 |
10 |
Carbon tetrafluoride (tetrafluoromethane) |
0 % |
31.12.2013 |
| *ex29033990 |
30 |
Perfluoroethane |
0 % |
31.12.2013 |
| *ex29033990 |
40 |
1,1-Difluoroethane |
0 % |
31.12.2013 |
| *ex29033990 |
50 |
1.1,1.3,3-Pentafluoropropane |
0 % |
31.12.2013 |
| ex29033990 |
70 |
1.1,1,2 Tetrafluoroethane, certified odourless containing a maximum:-
600 ppm by weight of 1.1,2,2-Tetrafluorethane,
- 2 ppm by weight of pentafluoroethane,
- 2 ppm by weight of chlorodifluoromethane,
- 2 ppm by weight of chloropentafluoroethane,
- 2 ppm by weight of dichlorodifluoromethane
For use in the manufacture of pharmaceutical grade propellant for medical metred dose inhalers |
0 % |
31.12.2011 |
| ex29033990 |
80 |
Hexafluoropropene |
0 % |
31.12.2011 |
| *ex29034300 |
10 |
1.1,1-Trichlorotrifluoroethane |
0 % |
31.12.2013 |
| *ex29035980 |
10 |
1.6,7.8,9.14,15.16,17.17,18,18-Dodecachloropentacyclo [12.2.1.16.9,02.13,05,10]octadeca-7,15-diene |
0 % |
31.12.2013 |
| ex29035980 |
30 |
Octafluorocyclopentene |
0 % |
31.12.2011 |
| *ex29036990 |
10 |
Di- or tetrachlorotricyclo[8.2.2.24,7]hexadeca-1(12),4.6,10.13,15-hexaene, mixed isomers |
0 % |
31.12.2013 |
| *ex29036990 |
20 |
1,2-Bis(pentabromophenyl)ethane |
0 % |
31.12.2013 |
| *ex29036990 |
40 |
2,6-Dichlorotoluene, of a purity by weight of 99 % or more and containing:-
0,001 mg/kg or less of tetrachlorodibenzodioxines,
- 0,001 mg/kg or less of tetrachlorodibenzofurans,
- 0,2 mg/kg or less of tetrachlorobiphenyls
|
0 % |
31.12.2013 |
| ex29041000 |
40 |
Sodium toluene-4-sulphonate |
0 % |
31.12.2012 |
| *ex29042000 |
40 |
2-Nitropropane |
0 % |
31.12.2013 |
| *ex29049095 |
20 |
1-Chloro-2,4-dinitrobenzene |
0 % |
31.12.2013 |
| *ex29051900ex38249097 |
1156 |
Potassium tert-butanolate (potassium tert-butoxide), whether or not in the form of a solution in tetrahydrofuran |
0 % |
31.12.2013 |
| *ex29051900 |
30 |
2,6-Dimethylheptan-4-ol |
0 % |
31.12.2013 |
| *29061100 |
|
Menthol |
0 % |
31.12.2013 |
| *ex29061900 |
10 |
Cyclohex-1,4-ylenedimethanol |
0 % |
31.12.2013 |
| *ex29061900 |
20 |
4,4’-Isopropylidenedicyclohexanol |
0 % |
31.12.2013 |
| *ex29062900 |
20 |
1-Hydroxymethyl-4-methyl-2.3,5,6-tetrafluorobenzene |
0 % |
31.12.2013 |
| *ex29071990 |
10 |
2.3,5-Trimethylphenol |
0 % |
31.12.2013 |
| *ex29071990 |
20 |
Biphenyl-4-ol |
0 % |
31.12.2013 |
| *ex29072100 |
10 |
Resorcinol |
0 % |
31.12.2013 |
| *ex29072900 |
20 |
4,4’-(3.3,5-Trimethylcyclohexylidene)diphenol |
0 % |
31.12.2013 |
| *ex29072900 |
30 |
4,4’,4’-Ethylidynetriphenol |
0 % |
31.12.2013 |
| *ex29072900 |
50 |
6,6’,6’-Tricyclohexyl-4,4’,4’-butane-1.1,3-triyltri(m-cresol) |
0 % |
31.12.2013 |
| *ex29072900 |
70 |
2,2’,2’,6,6’,6’-Hexa-tert-butyl-α, α’,α’-(mesitylene-2.4,6-triyl)tri-p-cresol |
0 % |
31.12.2013 |
| *ex29072900 |
85 |
Phloroglucinol whether or not hydrated |
0 % |
31.12.2013 |
| *ex29089990 |
30 |
4-Nitrophenol |
0 % |
31.12.2013 |
| *ex29091990 |
20 |
Bis(2-chloroethyl) ether |
0 % |
31.12.2013 |
| *ex29091990 |
30 |
Mixture of isomers of nonafluorobutyl methyl ether or nonafluorobutyl ethyl ether, of a purity by weight of 99 % or more |
0 % |
31.12.2013 |
| ex29091990 |
50 |
3-Ethoxy-perfluoro-2-methylhexane |
0 % |
31.12.2011 |
| *ex29093038 |
10 |
Bis(pentabromophenyl) ether |
0 % |
31.12.2013 |
| *ex29095000 |
10 |
4-(2-Methoxyethyl)phenol |
0 % |
31.12.2013 |
| *ex29096000 |
10 |
Bis(α, α-dimethylbenzyl) peroxide |
0 % |
31.12.2013 |
| *ex29109000 |
30 |
2,3-Epoxypropan-1-ol (glycidol) |
0 % |
31.12.2013 |
| *ex29109000 |
60 |
1,2-Epoxyoctadecane, of a purity by weight of 82 % or more |
0 % |
31.12.2013 |
| *ex29122900 |
30 |
α, α,3-trimethylbenzenepropanal |
0 % |
31.12.2013 |
| *ex29124900 |
10 |
3-Phenoxybenzaldehyde |
0 % |
31.12.2013 |
| ex29124900 |
20 |
4-Hydroxybenzaldehyde |
0 % |
31.12.2011 |
| ex29141990 |
20 |
Heptan-2-one |
0 % |
31.12.2012 |
| ex29141990 |
30 |
3-Methylbutanone |
0 % |
31.12.2012 |
| ex29141990 |
40 |
Pentan-2-one |
0 % |
31.12.2012 |
| *29142100 |
|
Camphor |
0 % |
31.12.2013 |
| *ex29142900 |
20 |
Cyclohexadec-8-enone |
0 % |
31.12.2013 |
| ex29143900 |
20 |
Stearoyl benzoyl methane |
0 % |
31.12.2012 |
| ex29143900 |
30 |
Benzophenone |
0 % |
31.12.2012 |
| ex29143900 |
40 |
1,3-Diphenylpropane-1,3-dione |
0 % |
31.12.2012 |
| *ex29143900 |
50 |
4-Phenylbenzophenone |
0 % |
31.12.2013 |
| *ex29143900 |
60 |
4-Methylbenzophenone |
0 % |
31.12.2013 |
| *ex29145000 |
30 |
2'-Hydroxyacetophenone |
0 % |
31.12.2013 |
| ex29145000 |
60 |
2,2-Dimethoxy-2-phenylacetophenone |
0 % |
31.12.2012 |
| *ex29145000 |
70 |
16α,17α-Epoxy-3β-hydroxypregn-5-en-20-one |
0 % |
31.12.2012 |
| *ex29145000 |
80 |
2’,6’-dihydroxyacetophenone |
0 % |
31.12.2013 |
| *ex29146990 |
10 |
2-Ethylanthraquinone |
0 % |
31.12.2013 |
| *ex29146990 |
20 |
2-Pentylanthraquinone |
0 % |
31.12.2013 |
| *ex29146990 |
30 |
1,4-Dihydroxyanthraquinone |
0 % |
31.12.2013 |
| *ex29147000 |
10 |
1-Chloro-3,3-dimethylbutan-2-one |
0 % |
31.12.2013 |
| *ex29147000 |
40 |
Perfluoro(2-methylpentan-3-one) |
0 % |
31.12.2013 |
| *ex29147000 |
50 |
3’-Chloropropiophenone |
0 % |
31.12.2013 |
| *ex29152900 |
10 |
Antimony triacetate |
0 % |
31.12.2013 |
| *ex29153900 |
40 |
tert-Butyl acetate |
0 % |
31.12.2013 |
| *ex29153900 |
50 |
3-Acetylphenyl acetate |
0 % |
31.12.2013 |
| *ex29159000 |
40 |
Nonanoic acid (pelargonic acid) |
0 % |
31.12.2013 |
| *ex29161200 |
10 |
2-tert-Butyl-6-(3-tert-butyl-2-hydroxy-5-methylbenzyl)-4-methylphenyl acrylate |
0 % |
31.12.2013 |
| *ex29161200 |
20 |
2-Ethoxyethyl acrylate |
0 % |
31.12.2013 |
| *ex29161200 |
30 |
Isobutyl acrylate |
0 % |
31.12.2013 |
| *ex29161200 |
40 |
2,4-Di-tert-pentyl-6-[1-(3,5-di-tert-pentyl-2-hydroxyphenyl)ethyl]phenylacrylate |
0 % |
31.12.2013 |
| *ex29161300 |
20 |
Zinc dimethacrylate, in the form of powder |
0 % |
31.12.2013 |
| *ex29161400 |
10 |
2,3-Epoxypropyl methacrylate |
0 % |
31.12.2013 |
| *ex29161995 |
20 |
Methyl 3,3-dimethylpent-4-enoate |
0 % |
31.12.2013 |
| *ex29162000 |
50 |
Ethyl 2,2-dimethyl-3-(2-methylpropenyl)cyclopropanecarboxylate |
0 % |
31.12.2013 |
| *ex29163900 |
20 |
3,5-Dichlorobenzoyl chloride |
3,6 % |
31.12.2013 |
| *ex29163900 |
40 |
Vinyl 4-tert-butylbenzoate |
0 % |
31.12.2013 |
| ex29163900 |
45 |
2-Chlorobenzoic acid |
0 % |
31.12.2011 |
| *ex29163900 |
50 |
3,5-Dimethylbenzoyl chloride |
0 % |
31.12.2013 |
| ex29163900 |
55 |
4-tert-Butylbenzoic acid |
0 % |
31.12.2012 |
| *ex29163900 |
60 |
4-Ethylbenzoyl chloride |
0 % |
31.12.2013 |
| *ex29163900 |
65 |
2-(4-nitrophenyl)butyric acid |
0 % |
31.12.2013 |
| *ex29163900 |
70 |
Ibuprofen (INN) |
0 % |
31.12.2013 |
| *ex29163900 |
80 |
Ethyl 2-(4-nitrophenyl)butyrate |
0 % |
31.12.2013 |
| *ex29171100 |
20 |
Bis(p-methylbenzyl) oxalate |
0 % |
31.12.2013 |
| *ex29171990 |
20 |
Sodium 1,2-bis(cyclohexyloxycarbonyl)ethanesulphonate |
0 % |
31.12.2013 |
| *ex29171990 |
40 |
Dodecanedioic acid, of a purity by weight of more than 98,5 % |
0 % |
31.12.2013 |
| *ex29171990 |
70 |
Itaconic acid |
0 % |
31.12.2013 |
| *ex29172000 |
30 |
1.4,5.6,7,7-Hexachloro-8.9,10-trinorborn-5-ene-2,3-dicarboxylic anhydride |
0 % |
31.12.2013 |
| *ex29172000 |
40 |
3-Methyl-1.2,3,6-tetrahydrophthalic anhydride |
0 % |
31.12.2013 |
| *ex29173490 |
10 |
Diallyl phthalate |
0 % |
31.12.2013 |
| *ex29181985 |
20 |
L-Malic acid |
0 % |
31.12.2013 |
| *ex29182900 |
10 |
Monohydroxynaphthoic acids |
0 % |
31.12.2013 |
| *ex29182900 |
30 |
Octadecyl-3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate |
0 % |
31.12.2011 |
| *ex29182900 |
50 |
Hexamethylene bis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate] |
0 % |
31.12.2013 |
| *ex29183000 |
30 |
Methyl-2-benzoylbenzoate |
0 % |
31.12.2013 |
| *ex29183000 |
40 |
Phthalaldehydic acid |
0 % |
31.12.2013 |
| *ex29189990 |
10 |
3,4-Epoxycyclohexylmethyl 3,4-epoxycyclohexanecarboxylate |
0 % |
31.12.2013 |
| *ex29189990 |
30 |
Methyl 2-(4-hydroxyphenoxy)propionate |
0 % |
31.12.2013 |
| *ex29189990 |
40 |
trans-4-Hydroxy-3-methoxycinnamic acid |
0 % |
31.12.2013 |
| *ex29189990 |
50 |
Methyl 3.4,5-trimethoxybenzoate |
0 % |
31.12.2013 |
| *ex29189990 |
60 |
3.4,5-Trimethoxybenzoic acid |
0 % |
31.12.2013 |
| *ex29199000 |
10 |
2,2’-Methylenebis(4,6-di-tert-butylphenyl) phosphate, monosodium salt |
0 % |
31.12.2013 |
| *ex29199000 |
30 |
Aluminium hydroxybis[2,2’-methylenebis(4,6-di-tert-butylphenyl)phosphate] |
0 % |
31.12.2013 |
| *ex29199000 |
40 |
Tri-n-hexylphosphate |
0 % |
31.12.2013 |
| *ex29201900 |
10 |
Fenitrothion (ISO) |
0 % |
31.12.2013 |
| *ex29201900 |
20 |
Tolclofos-methyl (ISO) |
0 % |
31.12.2013 |
| *ex29209010 |
10 |
Diethyl sulphate |
0 % |
31.12.2013 |
| *ex29209010 |
20 |
Diallyl 2,2’-oxydiethyl dicarbonate |
0 % |
31.12.2013 |
| *ex29209010 |
40 |
Dimethyl carbonate |
0 % |
31.12.2013 |
| *ex29209010 |
50 |
Di-tert-butyl dicarbonate |
0 % |
31.12.2013 |
| *29209030 |
|
Trimethyl phosphite |
0 % |
31.12.2013 |
| *29209040 |
|
Triethyl phosphite |
0 % |
31.12.2011 |
| *ex29209085 |
10 |
O,O’-Dioctadecyl pentaerythritol bis(phosphite) |
0 % |
31.12.2013 |
| *ex29211985 |
20 |
Ethyl(2-methylallyl)amine |
0 % |
31.12.2013 |
| *ex29211985 |
30 |
Allylamine |
0 % |
31.12.2013 |
| *ex29211985 |
40 |
Tris(diethylamido)tert-butylimido tantalum (V) |
0 % |
31.12.2013 |
| *ex29211985 |
50 |
Tetrakis (Ethylmethylamino) hafnium (IV) |
0 % |
31.12.2013 |
| *ex29212900 |
10 |
N, N,N',N' Tetrabutylhexamethylenediamine |
0 % |
31.12.2013 |
| *ex29212900 |
20 |
Tris[3-(dimethylamino)propyl]amine |
0 % |
31.12.2013 |
| *ex29212900 |
30 |
Bis[3-(dimethylamino)propyl]methylamine |
0 % |
31.12.2013 |
| *ex29213099 |
10 |
Dicyclohexyl(methyl)amine |
0 % |
31.12.2013 |
| *ex29213099 |
20 |
Cyclohex-1,3-ylenebis(methylamine), for the manufacture of dishwashing products |
0 % |
31.12.2013 |
| *ex29214200 |
10 |
2,6-Dichloro-4-nitroaniline |
0 % |
31.12.2013 |
| *ex29214200 |
15 |
4-Amino-3-nitrobenzenesulphonic acid |
0 % |
31.12.2013 |
| *ex29214200 |
25 |
Sodium hydrogen 2-aminobenzene-1,4-disulphonate |
0 % |
31.12.2013 |
| *ex29214200 |
35 |
2-Nitroaniline |
0 % |
31.12.2013 |
| *ex29214200 |
45 |
2.4,5-Trichloroaniline |
0 % |
31.12.2013 |
| *ex29214200 |
50 |
3-Aminobenzenesulfonic acid |
0 % |
31.12.2013 |
| *ex29214200 |
70 |
2-Aminobenzene-1,4-disulfonic acid |
0 % |
31.12.2013 |
| *ex29214200 |
80 |
4-Chloro-2-nitroaniline |
0 % |
31.12.2013 |
| *ex29214200 |
85 |
3,5-Dichloroaniline |
0 % |
31.12.2013 |
| *ex29214300 |
10 |
5-Amino-2-chlorotoluene-4-sulphonic acid |
0 % |
31.12.2013 |
| *ex29214300 |
20 |
4-Amino-6-chlorotoluene-3-sulphonic acid |
0 % |
31.12.2013 |
| *ex29214300 |
30 |
3-Nitro-p-toluidine |
0 % |
31.12.2013 |
| *ex29214300 |
40 |
4-Aminotoluene-3-sulphonic acid |
0 % |
31.12.2013 |
| *ex29214400 |
20 |
Diphenylamine |
0 % |
31.12.2013 |
| *ex29214500 |
10 |
Sodium hydrogen 3-aminonaphthalene-1,5-disulphonate |
0 % |
31.12.2013 |
| *ex29214500 |
20 |
2-Aminonaphthalene-1,5-disulphonic acid and its sodium salts |
0 % |
31.12.2013 |
| *ex29214500 |
40 |
1-Naphthylamine |
0 % |
31.12.2013 |
| *ex29214900 |
20 |
Pendimethalin (ISO) |
3,5 % |
31.12.2013 |
| *ex29214900 |
40 |
N-1-Naphthylaniline |
0 % |
31.12.2013 |
| *ex29215119 |
20 |
Toluene diamine (TDA), containing by weight 78 % or more but not more than 82 % of 4-methyl-m-phenylenediamine and 18 % or more but not more than 22 % of 2-methyl-m-phenylenediamine, and with a residual tar content of not more than 0,23 % by weight |
0 % |
31.12.2013 |
| *ex29215119 |
30 |
2-Methyl-p-phenylenediamine sulphate |
0 % |
31.12.2013 |
| *ex29215119 |
40 |
p-Phenylenediamine |
0 % |
31.12.2011 |
| *ex29215119 |
50 |
Mono- and dichloroderivatives of p-phenylenediamine and p-diaminotoluene |
0 % |
31.12.2013 |
| *ex29215990 |
10 |
Mixture of isomers of 3.5-diethyltoluenediamine |
0 % |
31.12.2013 |
| ex29215990 |
30 |
3,3’-dichlorobenzidine dihydrochloride |
0 % |
31.12.2012 |
| *ex29215990 |
40 |
4,4’-Diaminostilbene-2,2’-disulphonic acid |
0 % |
31.12.2013 |
| *ex29221980 |
10 |
4,4-Dimethoxybutylamine |
0 % |
31.12.2013 |
| *ex29221980 |
30 |
N,N,N’,N’-Tetramethyl-2,2’-oxybis(ethylamine) |
0 % |
31.12.2013 |
| *ex29221980 |
50 |
2-(2-Methoxyphenoxy)ethylamine |
0 % |
31.12.2013 |
| *ex29221980 |
60 |
N, N,N’-trimethyl-N’-(2-hydroxy-ethyl) 2,2’-oxybis(ethylamine) |
0 % |
31.12.2013 |
| ex29221980 |
70 |
D-(-)-threo-2-amino-1-(p-nitrophenyl)propane-1,3-diol |
0 % |
31.12.2011 |
| *ex29222100 |
10 |
2-Amino-5-hydroxynaphthalene-1,7-disulphonic acid and its salts, of a purity by weight of 60 % or more |
0 % |
31.12.2013 |
| *ex29222100 |
30 |
6-Amino-4-hydroxynaphthalene-2-sulphonic acid |
0 % |
31.12.2013 |
| *ex29222100 |
40 |
7-Amino-4-hydroxynaphthalene-2-sulphonic acid |
0 % |
31.12.2013 |
| *ex29222100 |
50 |
Sodium hydrogen 4-amino-5-hydroxynaphthalene-2,7-disulphonate |
0 % |
31.12.2013 |
| *ex29222900 |
10 |
2-Methyl-N-phenyl-p-anisidine |
0 % |
31.12.2013 |
| *ex29222900 |
20 |
3-Aminophenol |
0 % |
31.12.2013 |
| *ex29222900 |
25 |
5-Amino-o-cresol |
0 % |
31.12.2013 |
| ex29222900 |
35 |
2-Amino-4,6-dinitrophenol sodium salt, containing at least 20 % water |
0 % |
31.12.2011 |
| *ex29222900 |
45 |
Anisidines |
0 % |
31.12.2013 |
| *ex29222900 |
50 |
6-Methoxy-m-toluidine |
0 % |
31.12.2013 |
| *ex29222900 |
70 |
4-Nitro-o-anisidine |
0 % |
31.12.2013 |
| *ex29222900 |
80 |
3-Diethylaminophenol |
0 % |
31.12.2013 |
| *ex29223900 |
10 |
1-Amino-4-bromo-9,10-dioxoanthracene-2-sulphonic acid and its salts |
0 % |
31.12.2013 |
| ex29223900 |
70 |
p-[(2-Chloroethyl)ethylamino]benzaldehyde |
0 % |
31.12.2011 |
| *ex29224300 |
10 |
Anthranilic acid |
0 % |
31.12.2013 |
| *ex29224985 |
10 |
Ornithine aspartate (INNM) |
0 % |
31.12.2013 |
| *ex29224985 |
40 |
Norvaline |
0 % |
31.12.2013 |
| *ex29224985 |
50 |
D-(-)-Dihydrophenylglycine |
0 % |
31.12.2013 |
| *ex29224985 |
60 |
Ethyl-4-dimethylaminobenzoate |
0 % |
31.12.2012 |
| *ex29224985 |
70 |
2-Ethylhexyl-4-dimethylaminobenzoate |
0 % |
31.12.2013 |
| *ex29225000 |
70 |
2-(1-Hydroxycyclohexyl)-2-(4-methoxyphenyl)ethylammonium acetate |
0 % |
31.12.2013 |
| *ex29239000 |
10 |
Tetramethylammonium hydroxide, in the form of an aqueous solution containing:-
25 (±0,5) % by weight of tetramethylammonium hydroxide,
- 500 mg/kg or less of carbonate,
- 200 mg/kg or less of chloride and
- 5 mg/kg or less of potassium
|
0 % |
31.12.2013 |
| *ex29239000 |
25 |
Tetrakis(dimethylditetradecylammonium) molybdate |
0 % |
31.12.2013 |
| ex29239000 |
35 |
Tetrabutylammonium fluoride trihydrate |
0 % |
31.12.2011 |
| *ex29239000 |
70 |
Tetrapropylammonium hydroxide, in the form of an aqueous solution containing:-
40 (± 2) % by weight of tetrapropylammonium hydroxide,
- 0,3 % by weight or less of carbonate,
- 0,1 % by weight or less of tripropylamine,
- 500 mg/kg or less of bromide and
- 25 mg/kg or less of potassium and sodium taken together
|
0 % |
31.12.2013 |
| *ex29239000 |
80 |
Diallyldimethylammonium chloride, in the form of an aqueous solution containing by weight 63 % or more but not more than 67 % of diallyldimethylammonium chloride |
0 % |
31.12.2013 |
| *ex29241900 |
10 |
2-Acrylamido-2-methylpropanesulphonic acid and its sodium or ammonium salts |
0 % |
31.12.2013 |
| *ex29241900 |
30 |
Methyl 2-acetamido-3-chloropropionate |
0 % |
31.12.2013 |
| *ex29241900 |
40 |
N-(1,1-Dimethyl-3-oxobutyl)acrylamide |
0 % |
31.12.2013 |
| *ex29241900 |
50 |
Acrylamide |
0 % |
31.12.2013 |
| *ex29241900 |
60 |
N,N-Dimethylacrylamide |
0 % |
31.12.2011 |
| *ex29241900 |
70 |
Methylcarbamate |
0 % |
31.12.2013 |
| *ex29242100 |
10 |
4,4’-Dihydroxy-7,7’-ureylenedi(naphthalene-2-sulfonic acid) and its sodium salts |
0 % |
31.12.2013 |
| *ex29242998 |
10 |
Alachlor (ISO) |
0 % |
31.12.2013 |
| *ex29242998 |
15 |
Acetochlor (ISO) |
0 % |
31.12.2013 |
| *ex29242998 |
25 |
3’-Diethylaminoacetanilide |
0 % |
31.12.2013 |
| *ex29242998 |
30 |
Propachlor (ISO) |
0 % |
31.12.2013 |
| *ex29242998 |
65 |
2-(4-Hydroxyphenyl)acetamide |
0 % |
31.12.2013 |
| *ex29242998 |
75 |
3-Amino-p-anisanilide |
0 % |
31.12.2013 |
| *ex29242998 |
80 |
5’-Chloro-3-hydroxy-2’,4’-dimethoxy-2-naphtanilide |
0 % |
31.12.2013 |
| *ex29242998 |
85 |
p-Aminobenzamide |
0 % |
31.12.2013 |
| *ex29242998 |
86 |
Anthranilamide of a purity by weight of 99,5 % or more |
0 % |
31.12.2012 |
| *ex29242998 |
87 |
Paracetamol (INN) |
0 % |
31.12.2013 |
| *ex29242998 |
88 |
5’-chloro-3-hydroxy-2’-methyl-2-naphthanilide |
0 % |
31.12.2013 |
| *ex29242998 |
89 |
Flutolanil (ISO) |
0 % |
31.12.2013 |
| *ex29242998 |
91 |
3-Hydroxy-2’-methoxy-2-naphthanilide |
0 % |
31.12.2013 |
| *ex29242998 |
92 |
3-Hydroxy-2-naphthanilide |
0 % |
31.12.2013 |
| *ex29242998 |
93 |
3-Hydroxy-2’-methyl-2-naphthanilide |
0 % |
31.12.2013 |
| *ex29242998 |
94 |
2’-Ethoxy-3-hydroxy-2-naphthanilide |
0 % |
31.12.2013 |
| *ex29242998 |
96 |
4’-Chloro-3-hydroxy-2’,5’-dimethoxy-2-naphthanilide |
0 % |
31.12.2013 |
| *ex29242998 |
97 |
1,1-Cyclohexanediacetic acid monoamide |
0 % |
31.12.2013 |
| *ex29251100 |
20 |
Saccharin and its sodium salt |
0 % |
31.12.2013 |
| *ex29251995 |
10 |
N-Phenylmaleimide |
0 % |
31.12.2013 |
| *ex29252900 |
10 |
Dicyclohexylcarbodiimide |
0 % |
31.12.2013 |
| *ex29269095 |
20 |
2-(m-Benzoylphenyl)propiononitrile |
0 % |
31.12.2013 |
| *ex29269095 |
45 |
2-Cyanoacetamide |
0 % |
31.12.2013 |
| *ex29269095 |
50 |
Alkyl or alkoxyalkyl esters of cyanoacetic acid |
0 % |
31.12.2013 |
| ex29269095 |
55 |
Methyl-2-cyano-2-phenylbutyrate |
0 % |
31.12.2011 |
| *ex29269095 |
60 |
Cyanoacetic acid in crystalline form |
0 % |
31.12.2013 |
| ex29269095 |
61 |
m-(1-Cyanoethyl)benzoic acid |
0 % |
31.12.2011 |
| *ex29269095 |
65 |
Malononitrile |
0 % |
31.12.2013 |
| *ex29269095 |
80 |
Ethyl 2-cyano-2-phenylbutyrate |
0 % |
31.12.2013 |
| *ex29269095 |
81 |
4-Aminobenzonitrile |
0 % |
31.12.2013 |
| *ex29269095 |
86 |
Ethylenediaminetetraacetonitrile |
0 % |
31.12.2013 |
| *ex29269095 |
87 |
Nitrilotriacetonitrile |
0 % |
31.12.2013 |
| *ex29269095 |
88 |
1,3-Propylenediaminetetraacetonitrile |
0 % |
31.12.2013 |
| *ex29269095 |
89 |
Butyronitrile |
0 % |
31.12.2013 |
| *ex29270000 |
10 |
2,2’-Dimethyl-2,2’-azodipropionamidine dihydrochloride |
0 % |
31.12.2013 |
| *ex29270000 |
20 |
4-Anilino-2-methoxybenzenediazonium hydrogen sulphate |
0 % |
31.12.2013 |
| *ex29270000 |
30 |
4’-Aminoazobenzene-4-sulphonic acid |
0 % |
31.12.2013 |
| *ex29270000 |
40 |
2-Hydroxynaphthalene-1-diazonium-4-sulphonate |
0 % |
31.12.2013 |
| *ex29270000 |
50 |
2-Hydroxy-6-nitronaphthalene-1-diazonium-4-sulphonate, of a purity by weight of 60 % or more |
0 % |
31.12.2013 |
| *ex29270000 |
60 |
4,4’-Dicyano-4,4’-azodivaleric acid |
0 % |
31.12.2013 |
| *ex29280090 |
10 |
3,3'-Bis(3,5-di-tert-butyl-4-hydroxyphenyl)-N,N' bipropionamide |
0 % |
31.12.2013 |
| ex29280090 |
15 |
1,1’-(Hydroxyimino)bis-(2-propanol) |
0 % |
31.12.2011 |
| *ex29280090 |
20 |
2.4,6-Trichlorophenylhydrazine |
0 % |
31.12.2013 |
| *ex29280090 |
40 |
O-Ethylhydroxylamine, in the form of an aqueous solution |
0 % |
31.12.2013 |
| *ex29280090 |
60 |
Adipohydrazide |
0 % |
31.12.2013 |
| *ex29280090 |
80 |
Cyflufenamid (ISO) |
0 % |
31.12.2013 |
| *ex29291000 |
10 |
Methylenedicyclohexyl diisocyanates |
0 % |
31.12.2013 |
| *ex29291000 |
40 |
m-Isopropenyl-α, α-dimethylbenzyl isocyanate |
0 % |
31.12.2013 |
| *ex29291000 |
50 |
m-Phenylenediisopropylidene diisocyanate |
0 % |
31.12.2013 |
| *ex29291000 |
60 |
Trimethylhexamethylene diisocyanate, mixed isomers |
0 % |
31.12.2013 |
| *ex29291000 |
80 |
1,3-Bis(isocyanatomethyl) benzene |
0 % |
31.12.2011 |
| ex29302000 |
10 |
Prosulfocarb (ISO) |
0 % |
31.12.2012 |
| *ex29309085 |
15 |
Ethoprophos (ISO) |
0 % |
31.12.2013 |
| *ex29309085 |
25 |
Thiophanate-methyl (ISO) |
0 % |
31.12.2013 |
| *ex29309085 |
30 |
4-(4-Isopropoxyphenylsulphonyl)phenol |
0 % |
31.12.2013 |
| ex29309085 |
35 |
Glutathione |
0 % |
31.12.2011 |
| *ex29309085 |
40 |
3,3'-Thiodi(propionic acid) |
0 % |
31.12.2013 |
| *ex29309085 |
45 |
2-[(p-Aminophenyl)sulphonyl]ethyl hydrogen sulphate |
0 % |
31.12.2013 |
| *ex29309085 |
60 |
Methyl phenyl sulphide |
0 % |
31.12.2013 |
| ex29309085 |
66 |
Diphenyl sulphide |
0 % |
31.12.2012 |
| ex29309085 |
67 |
3-Bromomethyl-2-chloro-4-(methylsulphonyl)-benzoic acid |
0 % |
31.12.2012 |
| ex29309085 |
68 |
Clethodim (ISO) |
0 % |
31.12.2012 |
| ex29309085 |
69 |
2-Amino-4-methylsulphonyl-N-methylaniline |
0 % |
31.12.2012 |
| ex29309085 |
71 |
Triphenylsulphonium chloride |
0 % |
31.12.2012 |
| *ex29309085 |
76 |
2,2’-Dithiodi(benzoic acid) |
0 % |
31.12.2013 |
| *ex29309085 |
77 |
4-[4-(2-Propenyloxy)phenylsulphonyl]phenol |
0 % |
31.12.2013 |
| ex29309085 |
78 |
4-Mercaptomethyl-3,6-dithia-1,8-octanedithiol |
0 % |
31.12.2011 |
| *ex29309085 |
80 |
Captan (ISO) |
0 % |
31.12.2013 |
| ex29309085 |
82 |
Sodium toluene-4-sulphinate |
0 % |
31.12.2012 |
| ex29309085 |
83 |
Methyl-p-tolyl sulphone |
0 % |
31.12.2012 |
| *ex29309085 |
86 |
4-Hydroxybenzenethiol |
0 % |
31.12.2013 |
| *ex29309085 |
87 |
3-Sulphinobenzoic acid |
0 % |
31.12.2013 |
| ex29309085 |
89 |
Potassium- or sodium-salt of O-ethyl-, O-isopropyl-, O-butyl-, O-isobutyl- or O-pentyl-dithiocarbonates |
0 % |
31.12.2011 |
| *29310010 |
|
Dimethyl methylphosphonate |
0 % |
31.12.2013 |
| *ex29310095 |
05 |
Butylethylmagnesium, in the form of a solution in heptane |
0 % |
31.12.2013 |
| *ex29310095 |
40 |
N-(Phosphonomethyl)iminodiacetic acid |
0 % |
31.12.2013 |
| *ex29310095 |
50 |
Bis(2.4,4-trimethylpentyl)phosphinic acid |
0 % |
31.12.2013 |
| *ex29310095 |
85 |
Tributyl(tetradecyl)phosphonium chloride, whether or not in the form of an aqueous solution |
0 % |
31.12.2013 |
| *ex29310095 |
86 |
Mixture of the isomers 9-icosyl-9-phosphabicyclo[3.3.1]nonane and 9-icosyl-9-phosphabicyclo[4.2.1]nonane |
0 % |
31.12.2013 |
| *ex29310095 |
87 |
Tris(4-methylpentan-2-oximino)methylsilane |
0 % |
31.12.2013 |
| ex29310095 |
91 |
Trimethylsilane |
0 % |
31.12.2011 |
| *ex29310095 |
96 |
3-(Hydroxyphenylphosphinoyl)propionic acid |
0 % |
31.12.2013 |
| *ex29310095 |
97 |
Potassium 4-tolylphosphinate, in the form of an aqueous solution |
0 % |
31.12.2013 |
| *ex29321900 |
70 |
Furfurylamine |
0 % |
31.12.2013 |
| *ex29321900 |
75 |
Tetrahydro-2-methylfuran |
0 % |
31.12.2013 |
| *ex29322985 |
10 |
2’-Anilino-6’-[ethyl(isopentyl)amino]-3’-methylspiro[isobenzofuran-1(3H),9’-xanthen]-3-one |
0 % |
31.12.2013 |
| *ex29322985 |
35 |
6’-Diethylamino-3’-methyl-2’-(2,4-xylidino)spiro[isobenzofuran-1(3H),9’-xanthen]-3-one |
0 % |
31.12.2013 |
| *ex29322985 |
55 |
6-Dimethylamino-3,3-bis(4-dimethylaminophenyl)phthalide |
0 % |
31.12.2013 |
| *ex29322985 |
60 |
6’-(Dibutylamino)-3’-methyl-2’-(phenylamino)-spiro[isobenzofuran-1(3H),9’-[9H]xanthen]-3-one |
0 % |
31.12.2011 |
| *ex29322985 |
70 |
3’,6’-Bis(ethylamino)-2’,7’-dimethylspiro[isobenzofuran-1(3H),9’-[9H]-xanthen]-3-one |
0 % |
31.12.2013 |
| ex29322985 |
71 |
6’-(Diethylamino)-3’-methyl-2’-(phenylamino)-spiro[isobenzofuran-1(3H),9’-[9H]xanthen]-3-one |
0 % |
31.12.2011 |
| ex29322985 |
72 |
2’-[Bis(phenylmethyl)amino]-6’-(diethylamino)-spiro[isobenzofuran-1(3H),9’-[9H]xanthen]-3-one |
0 % |
31.12.2011 |
| *ex29322985 |
80 |
Gibberellic acid with a minimum purity by weight of 88 % |
0 % |
31.12.2013 |
| *ex29322985 |
84 |
Decahydro-3a,6.6,9a-tetramethylnaphth [2,1-b] furan-2 (1H)-one |
0 % |
31.12.2013 |
| *ex29322985 |
85 |
Hexan-4-olide |
0 % |
31.12.2013 |
| *ex29329900 |
10 |
Bendiocarb (ISO) |
0 % |
31.12.2013 |
| *ex29329900 |
30 |
Carbofuran (ISO) |
0 % |
31.12.2013 |
| *ex29329900 |
40 |
1.3:2,4-Bis-O-(3,4-dimethylbenzylidene)-D-glucitol |
0 % |
31.12.2013 |
| *ex29329900 |
70 |
1.3:2,4-bis-O-Benzylidene-D-glucitol |
0 % |
31.12.2011 |
| *ex29329900 |
75 |
3-(3,4-Methylenedioxyphenyl)-2-methylpropanal |
0 % |
31.12.2011 |
| *ex29329900 |
80 |
1.3:2,4-bis-O-(4-Methylbenzylidene)-D-glucitol |
0 % |
31.12.2011 |
| *ex29331990 |
30 |
3-Methyl-1-p-tolyl-5-pyrazolone |
0 % |
31.12.2013 |
| *ex29331990 |
40 |
Edaravone (INN) |
0 % |
31.12.2013 |
| *ex29331990 |
50 |
Fenpyroximate (ISO) |
0 % |
31.12.2013 |
| *ex29331990 |
60 |
Pyraflufen-ethyl (ISO) |
0 % |
31.12.2013 |
| *ex29331990 |
70 |
4,5-Diamino-1-(2-hydroxyethyl)-pyrazolsulphate |
0 % |
31.12.2013 |
| *ex29332100 |
10 |
Hydantoin |
0 % |
31.12.2013 |
| ex29332100 |
50 |
1-Bromo-3-chloro-5,5-dimethylhydantoin |
0 % |
31.12.2011 |
| *ex29332100 |
60 |
DL-p-Hydroxyphenylhydantoin |
0 % |
31.12.2011 |
| *ex29332100 |
70 |
α-(4-Methoxybenzoyl)-α-(1-benzyl-5-ethoxy-3-hydantoinyl)-2-chloro-5-dodecyloxycarbonylacetanilide |
0 % |
31.12.2011 |
| *ex29332990 |
40 |
Triflumizole (ISO) |
0 % |
31.12.2013 |
| *ex29332990 |
50 |
1,3-Dimethylimidazolidin-2-one |
0 % |
31.12.2013 |
| *ex29333999 |
15 |
Pyridine-2,3-dicarboxylic acid |
0 % |
31.12.2013 |
| *ex29333999 |
25 |
Imazethapyr (ISO) |
0 % |
31.12.2013 |
| *ex29333999 |
35 |
Aminopyralid (ISO) |
0 % |
31.12.2013 |
| *ex29333999 |
40 |
2-Chloropyridine |
0 % |
31.12.2013 |
| ex29333999 |
50 |
N-Fluoro-2,6-dichloropyridinium tetrafluoroborate |
0 % |
31.12.2011 |
| *ex29333999 |
60 |
2-Fluoro-6-(trifluoromethyl)pyridine |
0 % |
31.12.2013 |
| *ex29333999 |
65 |
Acetamiprid (ISO) |
0 % |
31.12.2013 |
| *ex29333999 |
75 |
Picolinafen (ISO) |
0 % |
31.12.2013 |
| *ex29334910 |
10 |
Quinmerac (ISO) |
0 % |
31.12.2013 |
| *ex29334990 |
50 |
Methyl 2-[(S)-3-{(E)-3-[2-(7-chloro-2-quinolyl)vinyl]phenyl}-3-hydroxypropyl] benzoate monohydrate |
0 % |
31.12.2013 |
| *ex29334990 |
60 |
5.6,7,8-Tetrahydroquinoline |
0 % |
31.12.2013 |
| *ex29334990 |
70 |
Quinolin-8-ol |
0 % |
31.12.2013 |
| ex29335200 |
10 |
Malonylurea (barbituric acid) |
0 % |
31.12.2011 |
| *ex29335995 |
15 |
(2R)-4-Oxo-4-[3-(trifluoromethyl)-5,6-dihydro[1.2,4]triazolo[4,3-a] pyrazin-7(8H)-yl]-1-(2.4,5-trifluorophenyl)butyl-2-ammonium phosphate monohydrate |
0 % |
31.12.2013 |
| *ex29335995 |
20 |
2,4-Diamino-6-chloropyrimidine |
0 % |
31.12.2013 |
| *ex29335995 |
25 |
2,5-Diamino-4,6-dihydroxypyrimidine monohydrochloride monohydrate |
0 % |
31.12.2013 |
| *ex29335995 |
30 |
Mepanipyrim (ISO) |
0 % |
31.12.2013 |
| ex29335995 |
35 |
4-Amino-2,6-dichloropyrimidine |
0 % |
31.12.2011 |
| *ex29335995 |
40 |
Guanine |
0 % |
31.12.2013 |
| *ex29335995 |
60 |
2,6-Dichloro-4,8-dipiperidinopyrimido[5,4-d]pyrimidine |
0 % |
31.12.2013 |
| *ex29335995 |
70 |
N-(4-Ethyl-2,3-dioxopiperazin-1-ylcarbonyl)-D-2-phenylglycine |
0 % |
31.12.2013 |
| *ex29336980 |
20 |
1.3,5-Tris[(3,5-di-tert-butyl-4-hydroxyphenyl)methyl]-1.3,5-triazine-2.4,6(1H,3H,5H)-trione |
0 % |
31.12.2013 |
| *ex29336980 |
50 |
1.3,5-Tris(2,3-dibromopropyl)-1.3,5-triazinane-2.4,6-trione |
0 % |
31.12.2013 |
| *ex29336980 |
80 |
Tris(2-hydroxyethyl)-1.3,5-triazinetrione |
0 % |
31.12.2013 |
| *ex29337900 |
10 |
Ezetimibe (INN) |
0 % |
31.12.2013 |
| ex29337900 |
30 |
5-Vinyl-2-pyrrolidone |
0 % |
31.12.2012 |
| *ex29337900 |
40 |
3,3-pentamethylene-4-butyrolactam |
0 % |
31.12.2013 |
| *ex29339980 |
10 |
2-(2H-Benzotriazol-2-yl)-4,6-di-tert-butylphenol |
0 % |
31.12.2013 |
| *ex29339980 |
15 |
2-(2H-Benzotriazol-2-yl)-4,6-di-tert-pentylphenol |
0 % |
31.12.2013 |
| *ex29339980 |
20 |
2-(2H-Benzotriazol-2-yl)-4,6-bis(1-methyl-1-phenylethyl)phenol |
0 % |
31.12.2013 |
| *ex29339980 |
25 |
6,6’-Di-2H-benzotriazol-2-yl-4,4’-bis(1.1,3,3-tetramethylbutyl)-2,2’-methylenediphenol |
0 % |
31.12.2013 |
| *ex29339980 |
30 |
Quizalofop-P-ethyl (ISO) |
0 % |
31.12.2013 |
| *ex29339980 |
40 |
trans-4-Hydroxy-L-proline |
0 % |
31.12.2013 |
| *ex29339980 |
45 |
Maleic hydrazide (ISO) |
0 % |
31.12.2013 |
| *ex29339980 |
50 |
Metconazole (ISO) |
3,2 % |
31.12.2013 |
| *ex29339980 |
60 |
1,3-Bis(3-isocyanatomethylphenyl)-1,3-diazetidine-2,4-dione (dimeric 2,4-toluene diisocyanate) |
0 % |
31.12.2013 |
| *ex29339980 |
65 |
Candesartan cilexetil (INNM) |
0 % |
31.12.2013 |
| *ex29339980 |
69 |
[(3R)-4-(4-chlorobenzyl)-7-fluoro-5-(methylsulphonyl)-1.2,3,4-tetrahydrocyclopenta[b]indole-3-yl]acetic acid |
0 % |
31.12.2011 |
| *ex29339980 |
70 |
6,7-Dihydro-5H-cyclopenta[b]pyridine |
0 % |
31.12.2013 |
| *ex29339980 |
71 |
10-methoxyiminostilbene |
0 % |
31.12.2013 |
| *ex29339980 |
72 |
1.4,7-Trimethyl-1.4,7-Triazacyclononane |
0 % |
31.12.2013 |
| *ex29339980 |
73 |
5-(acetoacetylamino)benzimidazolone |
0 % |
31.12.2013 |
| *ex29339980 |
74 |
Imidazo[1,2-b] pyridazine-hydrochloride |
0 % |
31.12.2013 |
| *ex29339980 |
76 |
Manganese(2+), bis(octahydro-1.4,7-trimethyl-1H-1.4,7-triazonine-N1,N4,N7)tri-μ-oxodi-, acetate (1:2) |
0 % |
31.12.2013 |
| *ex29339980 |
77 |
Manganese(2+), bis(octahydro-1.4,7-trimethyl-1H-1.4,7-triazonine-N1,N4,N7)tri-μ-oxodi-, sulphate (1:1) |
0 % |
31.12.2013 |
| *ex29339980 |
78 |
3-Amino-3-azabicyclo (3.3.0) octane hydrochloride |
0 % |
31.12.2013 |
| *ex29339980 |
81 |
1.2,3-Benzotriazole |
0 % |
31.12.2011 |
| *ex29339980 |
82 |
Tolytriazol |
0 % |
31.12.2013 |
| *ex29339980 |
88 |
2,6-Dichloroquinoxaline |
0 % |
31.12.2013 |
| *ex29339980 |
89 |
Carbendazim (ISO) |
0 % |
31.12.2013 |
| *ex29341000 |
10 |
Hexythiazox (ISO) |
0 % |
31.12.2013 |
| *ex29341000 |
20 |
2-(4-Methylthiazol-5-yl)ethanol |
0 % |
31.12.2013 |
| *ex29341000 |
40 |
(Z)-2-(2-tert-butoxycarbonylaminothiazol-4-yl)-2-pentenoic acid |
0 % |
31.12.2013 |
| *ex29341000 |
50 |
2-(2-Formylaminothiazol-4-yl)acetic acid |
0 % |
31.12.2013 |
| *ex29342080 |
10 |
4-Chloro-1,3-benzothiazol-2(3H)-one |
0 % |
31.12.2013 |
| ex29342080 |
40 |
1,2-Benzisothiazol-3(2H)-one (Benzisothiazolinone (BIT)) |
0 % |
31.12.2012 |
| *ex29342080 |
50 |
S-(1,3-Benzothiazol-2-yl)-(Z)-2-(2-aminothiazol-4-yl)-2-(acetyloxyimino)thioacetate |
0 % |
31.12.2013 |
| *ex29349990 |
15 |
Carboxin (ISO) |
0 % |
31.12.2013 |
| *ex29349990 |
35 |
Dimethenamide (ISO) |
0 % |
31.12.2013 |
| *ex29349990 |
45 |
Tris(2,3-epoxypropyl)-1.3,5-triazinanetrione |
0 % |
31.12.2013 |
| *ex29349990 |
55 |
Olmesartan medoxomil (INN) |
0 % |
31.12.2013 |
| *ex29349990 |
60 |
DL-Homocysteine thiolactone hydrochloride |
0 % |
31.12.2013 |
| *ex29349990 |
65 |
Methyl 3-aminothiophene-2-carboxylate |
0 % |
31.12.2013 |
| *ex29349990 |
72 |
1-[3-(5-Nitro-2-furyl)allylideneamino]imidazolidine-2,4-dione |
0 % |
31.12.2013 |
| ex29349990 |
74 |
2-Isopropylthioxanthone |
0 % |
31.12.2012 |
| ex29349990 |
75 |
(4R-cis)-1,1-Dimethylethyl-6-[2[2-(4-fluorophenyl)-5-(1-isopropyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrol-1-yl]ethyl]-2,2-dimethyl-1,3-dioxane-4-acetate |
0 % |
31.12.2011 |
| ex29349990ex32042000 |
7610 |
2,5-Thiophenediylbis(5-tert-butyl-1,3-benzoxazole) |
0 % |
31.12.2011 |
| ex29349990 |
77 |
Potassium 5-methyl-1.3,4-oxadiazole-2-carboxylate |
0 % |
31.12.2011 |
| ex29349990 |
78 |
1.2,4-Thiadiazole-3-acetic acid 5-[(ethoxycarbonyl)amino]- methyl ester |
0 % |
31.12.2012 |
| *ex29349990 |
79 |
Thiophen-2-ethanol |
0 % |
31.12.2013 |
| *ex29349990 |
81 |
2-(5-Amino-1.2,4-thiadiazol-3-yl)-(Z)-2-methoxyiminoacetic acid |
0 % |
31.12.2013 |
| *ex29349990 |
82 |
2-Methyl-1-[4-(methylthio)phenyl]-2-morpholinopropan-1-one |
0 % |
31.12.2013 |
| *ex29350090 |
15 |
Flupyrsulfuron-methyl-sodium (ISO) |
0 % |
31.12.2013 |
| *ex29350090 |
20 |
Toluenesulphonamides |
0 % |
31.12.2013 |
| *ex29350090 |
25 |
Triflusulfuron-methyl (ISO) |
0 % |
31.12.2013 |
| *ex29350090 |
35 |
Chlorsulfuron (ISO) |
0 % |
31.12.2013 |
| *ex29350090 |
45 |
Rimsulfuron (ISO) |
0 % |
31.12.2013 |
| *ex29350090 |
50 |
4,4’-Oxydi(benzenesulphonohydrazide) |
0 % |
31.12.2013 |
| *ex29350090 |
55 |
Thifensulfuron-methyl (ISO) |
0 % |
31.12.2013 |
| *ex29350090 |
65 |
Tribenuron-methyl (ISO) |
0 % |
31.12.2013 |
| *ex29350090 |
75 |
Metsulfuron-methyl (ISO) |
0 % |
31.12.2013 |
| ex29350090 |
76 |
4-Toluenesulphonyl urea |
0 % |
31.12.2011 |
| *ex29350090 |
81 |
4-Amino-N-(4-aminophenyl)benzenesulphonamide |
0 % |
31.12.2013 |
| *ex29350090 |
82 |
N-(5,7-Dimethoxy[1.2,4]triazolo[1,5-a]pyrimidin-2-yl)-2-methoxy-4-(trifluoromethyl)pyridine-3-sulphonamide |
0 % |
31.12.2013 |
| *ex29350090 |
83 |
3-amino-N, N-diethyl-4-methoxybenzenesulphonamide |
0 % |
31.12.2013 |
| *ex29350090 |
85 |
N-[4-(Isopropylaminoacetyl)phenyl]methanesulphonamide hydrochloride |
0 % |
31.12.2013 |
| *ex29350090 |
86 |
4-(m-Tolylamino)pyridine-3-sulphonamide |
0 % |
31.12.2013 |
| *ex29350090 |
88 |
N-(2-(4-Amino-N-ethyl-m-toluidino)ethyl)methanesulphonamide sesquisulphate monohydrate |
0 % |
31.12.2013 |
| ex29350090 |
89 |
3-(3-Bromo-6-fluoro-2-methylindol-1-ylsulphonyl)-N, N-dimethyl-1.2,4-triazol-1-sulphonamide |
0 % |
31.12.2011 |
| *ex29389090 |
10 |
Hesperidin |
0 % |
31.12.2013 |
| *32012000 |
|
Wattle extract |
0 % |
31.12.2013 |
| *ex32019090 |
20 |
Tanning extracts derived from gambier and myrobalan fruits |
0 % |
31.12.2013 |
| ex32041300 |
10 |
C.I. Basic Red 1 dye |
0 % |
31.12.2011 |
| ex32041500 |
10 |
Dye C.I. Vat Orange 7 (C.I. Pigment Orange 43) |
0 % |
31.12.2012 |
| *ex32041500 |
60 |
Dyestuff C.I. Vat Blue 4 |
0 % |
31.12.2013 |
| *ex32041700 |
10 |
Dye C.I. Pigment Yellow 81 |
0 % |
31.12.2013 |
| *ex32041700 |
30 |
Dye C.I. Pigment Yellow 97 |
0 % |
31.12.2012 |
| *ex32041900 |
15 |
4-{4-[3-(4-Methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo [h]indeno[2,1-f]chromen-3-yl]phenyl}morpholine |
0 % |
31.12.2013 |
| *ex32041900 |
25 |
Cyclohexyl 8-methyl-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate |
0 % |
31.12.2013 |
| *ex32041900 |
65 |
6-Methoxy-7-morpholino-13-ethyl-13-methoxy-3,3-bis-(4-methoxyphenyl)-3,13-dihydrobenzo[h]indeno[2,1-f]chromene |
0 % |
31.12.2013 |
| *ex32041900 |
70 |
Dye C.I. Solvent Red 49 |
0 % |
31.12.2013 |
| *ex32041900 |
75 |
6,7-Dimethoxy-13-ethyl-13-methoxy-3,3-bis-(4-methoxyphenyl)-3,13-dihydrobenzo[h]indeno[2,1-f]chromene |
0 % |
31.12.2013 |
| *ex32041900 |
80 |
((R) and (S) isomers of 6.7-Dimethoxy-13-ethyl-13-[2-(2-methoxyethoxy)-ethoxy]-3-(4-methoxyphenyl)-3-(4-fluorophenyl)-3,13-dihydrobenzo[h]indeno[2,1-f]chromene |
0 % |
31.12.2013 |
| *ex32041900 |
81 |
6,11-Difluoro-3,3-di-(4-methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromene |
0 % |
31.12.2013 |
| *ex32041900 |
82 |
3-(4-Fluorophenyl)-3-(4-piperidinophenyl)-13,13-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromene |
0 % |
31.12.2013 |
| *ex32041900 |
83 |
6,7-Dimethoxy-11-cyano-3,3-di-(4-methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromene |
0 % |
31.12.2013 |
| *ex32050000 |
10 |
Aluminium lakes prepared from dyes for use in the manufacture of pigments for the pharmaceutical industry |
0 % |
31.12.2013 |
| *ex32061100 |
10 |
Titanium dioxide coated with isopropoxytitanium triisostearate, containing by weight 1,5 % or more but not more than 2,5 % of isopropoxytitanium triisostearate |
0 % |
31.12.2013 |
| *ex32064200 |
10 |
Lithopone |
0 % |
31.12.2013 |
| *32065000 |
|
Inorganic products of a kind used as luminophores |
0 % |
31.12.2013 |
| *ex32073000 |
10 |
Preparation containing:-
not more than 85 % by weight of silver,
- not less than 2 % by weight of palladium,
- barium titanate,
- terpineol, and
- ethyl cellulose,
used for screen printing in the manufacture of multilayer ceramic capacitors |
0 % |
31.12.2013 |
| *ex32074080 |
30 |
Glass frit, for use in the manufacture of cathode-ray tubes |
0 % |
31.12.2013 |
| *ex32081090ex37079090 |
1060 |
Anti-reflection coating, consisting of an ester based polymer modified with a chromophore group, in the form of a solution of either 2-methoxy-1-propanol, 2-methoxy-1-methylethyl acetate or methyl-2-hydroxyisobutyrate, containing by weight not more than 10 % of polymer |
0 % |
31.12.2013 |
| *ex32082010 |
10 |
Copolymer of N-vinylcaprolactam, N-vinyl-2-pyrrolidone and dimethylaminoethyl methacrylate, in the form of a solution in ethanol containing by weight 34 % or more but not more than 40 % of copolymer |
0 % |
31.12.2013 |
| *ex32082010 |
40 |
Poly(1H,1H-heptafluorobutyl methacrylate) dissolved in a mixture of methyl perfluorobutyl ether and methyl perfluoroisobutyl ether |
0 % |
31.12.2011 |
| *ex32089019 |
10 |
Copolymer of maleic acid and methyl vinyl ether, monoesterified with ethyl and/or isopropyl and/or butyl groups, in the form of a solution in ethanol, ethanol and butanol, isopropanol or isopropanol and butanol |
0 % |
31.12.2013 |
| ex32089019ex39029090 |
1594 |
Modified, chlorinated polyolefins, whether or not in a solution or dispersion |
0 % |
31.12.2013 |
| *ex32089019 |
40 |
Polymer of methylsiloxane, in the form of a solution in a mixture of acetone, butanol, ethanol and isopropanol, containing by weight 5 % or more but not more than 11 % of polymer of methylsiloxane |
0 % |
31.12.2013 |
| ex32089019 |
60 |
Copolymer of hydroxystyrene and either styrene or alkoxystyrene or both, dissolved in ethyl lactate |
0 % |
31.12.2011 |
| ex32089019 |
75 |
Acenaphthalene copolymer in ethyl lactate solution |
0 % |
31.12.2012 |
| *ex32089019 |
85 |
Mixture containing by weight:-
30~45 % Polyamide resin;
- 2~10 % Diazonaphthoquinone;
- 50~65 % γ-Butyrolactone.
|
0 % |
31.12.2013 |
| *ex32089091 |
10 |
Preparation on the basis of polyhydroxyamide containing at least naphthoquinone ester derivate or tosylate dissolved in γ-butyrolactone and/or 2-methoxy-1-methylethyl acetate |
0 % |
31.12.2012 |
| *ex32089099 |
10 |
Solution based on chemically modified natural polymers, containing two or more of the following dyes:-
methyl 8’-acetoxy-1.3,3.5,6-pentamethyl-2,3-dihydrospiro[1H-indole-2,3’-naphtho[2,1-b][1,4]oxazine]-9’-carboxylate,
- methyl 6-(isobutyryloxy)-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate,
- 13-isopropyl-3,3-bis(4-methoxyphenyl)-6,11-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-13-ol,
- ethoxycarbonylmethyl 8-methyl-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate,
- 13-ethyl-3-[4-(morpholino)phenyl]-3-phenyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-13-ol
|
0 % |
31.12.2013 |
| *ex32089099 |
20 |
Solution based on chemically modified natural polymers, containing two or more of the following dyes:-
4-[4-(13,13-dimethyl-3-phenyl-3,13-dihydrobenzo [h]indeno[2,1-f]chromen-3-yl)phenyl]morpholine,
- 4-{4-[3-(4-methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo [h]indeno[2,1-f]chromen-3-yl]phenyl}morpholine,
- cyclohexyl 8-methyl-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate,
- ethoxycarbonylmethyl 6-acetoxy-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate,
- 2-pentyl-7,7-diphenylbenzo[h]chromeno[6,5-d]-1,3-dioxin-4(7H)-one,
- 13-butyl-13-ethoxy-6,11-dimethoxy-3,3-bis(4-methoxyphenyl)-3,13-dihydrobenzo [h]indeno[2,1-f]chromene,
- 3-(4-methoxyphenyl)-13,13-dimethyl-3-phenyl-3,13-dihydrobenzo [h]indeno[2,1-f]chromene,
- 6,7-dimethoxy-3,3-bis(4-methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo [h]indeno[2,1-f]chromene
|
0 % |
31.12.2013 |
| *ex32151100ex32151900 |
1010 |
Printing ink, liquid, consisting of a dispersion of a vinyl acrylate copolymer and colour pigments in isoparaffins, containing by weight not more than 13 % of vinyl acrylate copolymer and colour pigments |
0 % |
31.12.2013 |
| *ex32159080 |
10 |
Ink formulation, for use in the manufacture of ink-jet cartridges |
0 % |
31.12.2013 |
| *ex32159080 |
20 |
Heat sensitive ink fixed on a plastic film |
0 % |
31.12.2013 |
| *33011210 |
|
Essential oil of orange, not deterpenated |
0 % |
31.12.2013 |
| *ex34021300 |
10 |
Vinyl copolymer surface active agent based on polypropylene glycol |
0 % |
31.12.2013 |
| ex34021300 |
20 |
Surfactant containing 1,4-dimethyl-1,4-bis(2-methylpropyl)-2-butyne-1,4-diyl ether, polymerized with oxirane, methyl terminated |
0 % |
31.12.2012 |
| *ex34029010 |
20 |
Mixture of docusate sodium (INN) and sodium benzoate |
0 % |
31.12.2013 |
| *ex34029010 |
40 |
Amphoteric fluorinated surfactant in a mixture of water and ethanol, containing by weight 25 % or more but not more than 30 % surfactant |
0 % |
31.12.2013 |
| *ex34039990 |
10 |
Cutting-fluid preparation based on an aqueous solution of synthetic polypeptides |
0 % |
31.12.2013 |
| *ex35051050 |
20 |
O-(2-Hydroxyethyl)-derivative of hydrolysed maize starch |
0 % |
31.12.2013 |
| *ex35069100 |
10 |
Adhesive based on an aqueous dispersion of a mixture of dimerised rosin and a copolymer of ethylene and vinyl acetate (EVA) |
0 % |
31.12.2013 |
| *ex35069100 |
30 |
Two component microencapsulated epoxy adhesive dispersed in a solvent |
0 % |
31.12.2013 |
| *ex35069100 |
40 |
Acrylic pressure sensitive adhesive with a thickness of 0,076 mm or more but not more than 0,127 mm, put up in rolls of a width of 45,7 cm or more but not not more than 78,5 cm supplied on a release liner with an initial peel adhesion release value of not less than 15N/25 mm (measured according to ASTM D3330) |
0 % |
31.12.2012 |
| *ex37013000 |
10 |
Relief printing plate, of a kind used for printing on newsprint, consisting of a metal substrate coated with a photopolymer layer of a thickness of 0,2 mm or more but not more than 0,8 mm, not covered with a release film, of a total thickness of not more than 1 mm |
0 % |
31.12.2013 |
| *ex37019900 |
10 |
Plate of quartz or of glass, covered with a film of chromium and coated with a photosensitive or electron-sensitive resin, for the manufacture of masks for the goods of heading No 8541 or 8542 |
0 % |
31.12.2013 |
| *ex37071000 |
10 |
Photosensitive emulsion for the sensitization of silicon discs |
0 % |
31.12.2013 |
| *ex37071000 |
15 |
Sensitising emulsion, consisting of diazooxonaphtalenesulphonic acid ester and phenolic resins, containing by weight not more than 12 % of diazooxonaphtalenesulphonic acid ester, in 2-methoxy-1-methylethyl acetate or ethyl lactate |
0 % |
31.12.2013 |
| *ex37071000 |
25 |
Sensitising emulsion containing:-
phenolic or acrylic resins
- a maximum 2 % by weight of light sensitive acid precursor,
in a solution containing 2-methoxy-1-methylethyl acetate or ethyl lactate |
0 % |
31.12.2013 |
| *ex37071000 |
30 |
Preparation based on photosensitive acrylic containing polymer, containing colour pigments, 2-methoxy-1-methylethylacetate and cyclohexanone and whether or not containing ethyl-3-ethoxypropionate |
0 % |
31.12.2013 |
| ex37071000 |
35 |
Sensitising emulsion, consisting of acrylate and/or methacrylate polymers, containing by weight not more than 7 % photosensitive acid precursors dissolved in an organic solvent containing at least 2-methoxy-1-methylethyl acetate |
0 % |
31.12.2011 |
| *ex37071000 |
40 |
Sensitising emulsion, containing:-
not more than 10 % by weight of naphthoquinonediazide esters,
- 2 % or more but not more than 20 % by weight of copolymers of hydroxystyrene
- not more than 7 % by weight of epoxy-containing derivatives
dissolved in 1-ethoxy-2-propyl acetate and/or ethyl lactate |
0 % |
31.12.2011 |
| ex37079030 |
10 |
Toner, in the form of powder, consisting of a copolymer of styrene and butyl acrylate and either magnetite or carbon black, for use as a developer in the manufacture of cartridges for facsimile machines or computer printers |
0 % |
31.12.2013 |
| *ex37079030 |
20 |
Toner, based on a polyol resin, in the form of powder |
0 % |
31.12.2013 |
| *ex37079030 |
40 |
Polyester resin based toner, manufactured by a polymerisation process, for use as a developer in the manufacture of computer printer and copier cartridges |
0 % |
31.12.2013 |
| *ex37079090 |
10 |
Anti-reflection coating, consisting of a modified methacrylic polymer, containing by weight not more than 10 % of polymer, in the form of a solution in 2-methoxy-1-methylethyl acetate and 1-methoxypropan-2-ol |
0 % |
31.12.2013 |
| *ex37079090ex38249097 |
3091 |
Anti-reflection coating, in the form of an aqueous solution, containing by weight:-
not more than 2 % of perhalogenated sulphonic acid derivatives,
- not more than 1 % of a vinyl polymer
|
0 % |
31.12.2013 |
| *ex38012090 |
10 |
Colloidal graphite in suspension in water, for use as internal coating in colour cathode-ray tubes |
0 % |
31.12.2013 |
| *38059010 |
|
Pine oil |
1,7 % |
31.12.2013 |
| *ex38089190 |
10 |
Indoxacarb (ISO) and its (R) isomer, fixed on a support of silicon dioxide |
0 % |
31.12.2013 |
| *ex38089190 |
30 |
Preparation containing endospores or spores and protein crystals derived from either:-
Bacillus thuringiensis Berliner subsp. aizawai and kurstaki or,
- Bacillus thuringiensis subsp. kurstaki or,
- Bacillus thuringiensis subsp. israelensis
|
0 % |
31.12.2013 |
| *ex38089190 |
40 |
Spinosad (ISO) |
0 % |
31.12.2013 |
| *ex38089290 |
10 |
Fungicide in the form of a powder, containing by weight 65 % or more but not more than 75 % of hymexazole (ISO), not put up for retail sale |
0 % |
31.12.2013 |
| *ex38089290 |
30 |
Preparation consisting of a suspension of pyrithione zinc (INN) in water, containing by weight 24 % or more but not more than 26 % of pyrithione zinc (INN) |
0 % |
31.12.2013 |
| ex38089315 |
10 |
Preparation based on a concentrate containing by weight 45 % or more but not more than 55 % of the active herbicidal ingredient Penoxsulam as an aqueous suspension |
0 % |
31.12.2012 |
| ex38089327 |
20 |
Organic solution of Clethodim (ISO), with a Clethodim content of 37 % (± 2 %) or 70 % (± 2 %) by weight |
0 % |
31.12.2012 |
| *ex38099100 |
10 |
Mixture of 5-ethyl-2-methyl-2-oxo-1.3,2λ5-dioxaphosphoran-5-ylmethyl methyl methylphosphonate and bis(5-ethyl-2-methyl-2-oxo-1.3,2λ5-dioxaphosphoran-5-ylmethyl) methylphosphonate |
0 % |
31.12.2013 |
| *ex38099200 |
10 |
Paper anti-fading agent, consisting of a mixture of magnesium trisilicate and monosodium salt of 2,2’-methylenebis(4,6-di-tert-butylphenyl) phosphate |
0 % |
31.12.2013 |
| *ex38101000 |
10 |
Soldering paste, consisting of a mixture of metals and resin containing by weight:-
70 % or more, but not more than 90 % of tin
- not more than 10 % of one or more metals of silver, copper, bismuth, zinc, or indium
for use in the electro technical industry |
0 % |
31.12.2013 |
| *ex38112100 |
10 |
Salts of dinonylnaphthalenesulphonic acid, in the form of a solution in mineral oils |
0 % |
31.12.2013 |
| ex38112100 |
20 |
Additives for lubricating oils, based on complex organic molybdenum compounds, in the form of a solution in mineral oil |
0 % |
31.12.2013 |
| *ex38119000 |
20 |
Corrosion inhibitor, containing reaction products of fatty acids and tall oil with formaldehyde and (Z)-N-9-octadecenyl-1,3-propanediamine |
0 % |
31.12.2011 |
| *ex38123080 |
20 |
Mixture containing predominantly bis(2.2,6,6-tetramethyl-1-octyloxy-4-piperidyl) sebacate |
0 % |
31.12.2013 |
| *ex38123080 |
30 |
Compound stabilisers containing by weight 15 % or more but not more than 40 % of sodium perchlorate and not more than 70 % of 2-(2-methoxyethoxy)ethanol |
0 % |
31.12.2013 |
| *ex38140090 |
20 |
Mixture containing by weight:-
69 % or more but not more than 71 % of 1-methoxypropan-2-ol,
- 29 % or more but not more than 31 % of 2-methoxy-1-methylethyl acetate
|
0 % |
31.12.2013 |
| *ex38140090 |
40 |
Azeotrope mixtures containing isomers of nonafluorobutyl methyl ether and/or nonafluorobutyl ethyl ether |
0 % |
31.12.2013 |
| *ex38151200 |
10 |
Catalyst, in the form of granules or rings of a diameter of 3 mm or more but not more than 10 mm, consisting of silver on an aluminium oxide support and containing by weight 8 % or more but not more than 40 % of silver |
0 % |
31.12.2013 |
| *ex38151990 |
10 |
Catalyst, consisting of chromium trioxide or dichromium trioxide fixed on a support of silicon dioxide, of a pore volume, as determined by the nitrogen absorption method, of 2 cm3/g or more |
0 % |
31.12.2013 |
| *ex38151990 |
15 |
Catalyst, in the form of a powder, consisting of a mixture of metal oxides fixed on a support of silicon dioxide, containing by weight 20 % or more but not more than 40 % of molybdenum, bismuth and iron evaluated together, for use in the manufacture of acrylonitrile |
0 % |
31.12.2013 |
| *ex38151990 |
30 |
Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polypropylene |
0 % |
31.12.2013 |
| *ex38151990 |
40 |
Catalyst, in the form of spheres of a diameter of 4.2 mm or more but not more than 9 mm, consisting of a mixture of metals oxides containing predominantly oxides of molybdenum, vanadium and copper, on a support of silicon dioxide and/or aluminium oxide, for use in the manufacture of acrylic acid |
0 % |
31.12.2013 |
| *ex38151990 |
41 |
Catalysts in the form of tablets, consisting of 60 % (± 2 %) by weight of copper oxide on a support of aluminium oxide |
0 % |
31.12.2012 |
| *ex38151990 |
50 |
Catalyst consisting of organo-metallic compounds of titanium, magnesium and aluminium on a support of silicon dioxide, in the form of a suspension in tetrahydrofuran |
0 % |
31.12.2013 |
| *ex38151990 |
60 |
Catalyst consisting of dichromium trioxide, fixed on a support of aluminium oxide |
0 % |
31.12.2013 |
| *ex38151990 |
65 |
Catalyst consisting of phosphoric acid chemically bonded to a support of silicon dioxide |
0 % |
31.12.2013 |
| *ex38151990 |
70 |
Catalyst consisting of organo-metallic compounds of aluminium and zirconium, fixed on a support of silicon dioxide |
0 % |
31.12.2013 |
| *ex38151990 |
75 |
Catalyst consisting of organo-metallic compounds of aluminium and chromium, fixed on a support of silicon dioxide |
0 % |
31.12.2013 |
| *ex38151990 |
80 |
Catalyst consisting of organo-metallic compounds of magnesium and titanium, fixed on a support of silicon dioxide, in the form of a suspension in mineral oil |
0 % |
31.12.2013 |
| *ex38151990 |
85 |
Catalyst consisting of organo-metallic compounds of aluminium, magnesium and titanium, fixed on a support of silicon dioxide, in the form of powder |
0 % |
31.12.2013 |
| *ex38151990 |
86 |
Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polyolefins |
0 % |
31.12.2013 |
| ex38159090 |
16 |
Initiator based on dimethylaminopropyl urea |
0 % |
31.12.2012 |
| *ex38159090 |
20 |
Catalyst, in powder form, consisting of a mixture of titanium trichloride and aluminium chloride, containing by weight:-
20 % or more but not more than 30 % of titanium and
- 55 % or more but not more than 72 % of chlorine
|
0 % |
31.12.2013 |
| *ex38159090 |
50 |
Catalyst containing titanium trichloride, in the form of a suspension in hexane or heptane containing by weight, in the hexane- or heptane-free material, 9 % or more but not more than 30 % of titanium |
0 % |
31.12.2013 |
| *ex38159090 |
70 |
Catalyst, consisting of a mixture of (2-hydroxypropyl)trimethylammonium formate and dipropylene glycols |
0 % |
31.12.2013 |
| *ex38159090 |
71 |
Catalyst, containing N-(2-hydroxypropylammonium)diazabicyclo (2.2,2) octane-2-ethyl hexanoate, dissolved in ethane-1,2-diol |
0 % |
31.12.2011 |
| ex38159090 |
77 |
Catalyst powder in an aqueous suspension containing by weight:-
1 % or more but not more than 3 % of palladium,
- 0,25 % or more but not more than 3 % of lead,
- 0,25 % or more but not more than 0,5 % of lead hydroxide,
- 5,5 % or more but not more than 10 % of aluminium,
- 4 % or more but not more than 10 % of magnesium,
- 30 % or more but not more than 50 % of silicon dioxide
|
0 % |
31.12.2013 |
| *ex38159090 |
80 |
Catalyst consisting predominantly of dinonylnaphthalenedisulphonic acid in the form of a solution in isobutanol |
0 % |
31.12.2013 |
| *ex38159090 |
81 |
Catalyst, containing by weight 69 % or more but not more than 79 % of (2-hydroxy-1-methylethyl)trimethylammonium 2-ethylhexanoate |
0 % |
31.12.2013 |
| *ex38159090 |
84 |
Powder catalyst containing by weight a minimum 96 % of oxides of copper, chromium and iron |
0 % |
31.12.2013 |
| ex38159090 |
85 |
Catalyst based on aluminosilicate (zeolite), for the alkylation of aromatic hydrocarbons, for the transalkylation of alkylaromatic hydrocarbons or for the oligomerization of olefins |
0 % |
31.12.2012 |
| *ex38159090 |
86 |
Catalyst, in the form of rodlets, consisting of an aluminosilicate (zeolite), containing by weight 2 % or more but not more than 3 % of rare-earth metal oxides and less than 1 % of disodium oxide |
0 % |
31.12.2013 |
| *ex38159090 |
87 |
Reaction initiator, consisting of diisopropyl peroxydicarbonate, in the form of a solution in diallyl 2,2’-oxydiethyl dicarbonate |
0 % |
31.12.2013 |
| *ex38159090 |
88 |
Catalyst, consisting of titanium tetrachloride and magnesium chloride, containing by weight on an oil- and hexane-free basis:-
4 % or more but not more than 10 % of titanium and
- 10 % or more but not more than 20 % magnesium
|
0 % |
31.12.2013 |
| ex38159090 |
89 |
Rhodococcus rhodocrous J1 bacteria, containing enzymes, suspended in a polyacrylamide gel or in water, for use as a catalyst in the production of acrylamide by the hydration of acrylonitrile |
0 % |
31.12.2011 |
| *ex38170050 |
10 |
Mixture of alkylbenzenes (C14-26) containing by weight:-
35 % or more but not more than 60 % of eicosylbenzene,
- 25 % or more but not more than 50 % of docosylbenzene,
- 5 % or more but not more than 25 % of tetracosylbenzene
|
0 % |
31.12.2013 |
| *ex38170080 |
10 |
Mixture of alkylnaphthalenes, containing by weight:-
88 % or more but not more than 98 % of hexadecylnaphthalene
- 2 % or more but not more than 12 % of dihexadecylnaphthalene
|
0 % |
31.12.2013 |
| *ex38190000 |
20 |
Fire resistant hydraulic fluid based on phosphate ester |
0 % |
31.12.2013 |
| *ex38249015 |
10 |
Acid aluminosilicate (artificial zeolite of the Y type) in the sodium form, containing by weight not more than 11 % of sodium evaluated as sodium oxide, in the form of rodlets |
0 % |
31.12.2013 |
| *ex38249097 |
09 |
Anti-corrosion preparations consisting of salts of dinonylnaphthalenesulphonic acid, either:-
on a support of mineral wax, whether or not modified chemically, or
- in the form of a solution in an organic solvent
|
0 % |
31.12.2013 |
| *ex38249097 |
10 |
Calcined bauxite (refractory grade) |
0 % |
31.12.2013 |
| *ex38249097 |
12 |
Oligomer of tetrafluoroethylene, having one iodoethyl end-group |
0 % |
31.12.2013 |
| ex38249097 |
13 |
Preparations containing not less than 92 % but not more than 96,5 % by weight of 1.3:2,4-bis-O-(4-methylbenzylidene)-D-glucitol and also containing carboxylic acid derivatives and an alkyl sulphate |
0 % |
31.12.2011 |
| ex38249097 |
14 |
Calcium phosphonate phenate, dissolved in mineral oil |
0 % |
31.12.2011 |
| ex38249097 |
18 |
4-Methylmandelic acid, crude |
0 % |
31.12.2011 |
| *ex38249097 |
20 |
Preparation consisting by weight of 83 % or more of 3a,4.7,7a-tetrahydro-4,7-methanoindene (dicyclopentadiene), a synthetic rubber, whether or not containing by weight 7 % or more of tricyclopentadiene, and:-
either an aluminium-alkyl compound,
- or an organic complex of tungsten
- or an organic complex of molybdenum
|
0 % |
31.12.2013 |
| ex38249097 |
22 |
Preparations containing not less than 47 % by weight of 1.3:2,4-bis-O-benzylidene-D-glucitol |
0 % |
31.12.2011 |
| *ex38249097 |
25 |
Lithium tantalate wafers, undoped |
0 % |
31.12.2013 |
| *ex38249097 |
29 |
Preparation consisting predominantly of γ-butyrolactone and quaternary ammonium salts, for the manufacture of electrolytic capacitors |
0 % |
31.12.2013 |
| *ex38249097 |
30 |
2.4,7,9-Tetramethyldec-5-yne-4,7-diol, hydroxyethylated |
0 % |
31.12.2013 |
| *ex38249097 |
34 |
Mixture of phytosterols in the form of a crystalline waxy powder, containing by weight:-
36 % or more, but not more than 79 % of sitosterols,
- 15 % or more, but not more than 34 % of sitostanols,
- 4 % or more, but not more than 25 % of campesterols,
- 0 % or more, but not more than 14 % of campestanols
|
0 % |
31.12.2013 |
| ex38249097 |
36 |
Preparation based on 2.5,8,11-tetramethyl-6-dodecyn-5,8-diol ethoxylate |
0 % |
31.12.2012 |
| *ex38249097 |
37 |
Liquid crystal mixture for use in the manufacture of displays |
0 % |
31.12.2012 |
| *ex38249097 |
38 |
Alkyl carbonate-based preparation, also containing a UV absorber, for use in the manufacture of spectacle lenses |
0 % |
31.12.2012 |
| *ex38249097 |
39 |
Mixture containing by weight 40 % or more but not more than 50 % of 2-hydroxyethyl methacrylate and 40 % or more but not more than 50 % of glycerol ester of boric acid |
0 % |
31.12.2013 |
| *ex38249097 |
40 |
Azelaic acid of a purity by weight of 75 % or more but not mote than 85 % |
0 % |
31.12.2013 |
| *ex38249097 |
42 |
Mixed metals oxides, in the form of powder, containing by weight:-
either 5 % or more of barium, neodymium or magnesium and 15 % or more of titanium,
- or 30 % or more of lead and 5 % or more of niobium,
for use in the manufacture of dielectric films or for use as dielectric materials in the manufacture of multilayer ceramic capacitors |
0 % |
31.12.2013 |
| ex38249097 |
44 |
Mixture of phytosterols, not in the form of powder, containing by weight:-
75 % or more of sterols,
- not more than 25 % of stanols,
for use in the manufacture of stanol/sterol esters |
0 % |
31.12.2012 |
| ex38249097 |
45 |
Preparations consisting predominantly of ethylene glycol and:-
either diethylene glycol, dodecandioic acid and ammonia water,
- or N, N-dimethylformamide,
- or γ-butyrolactone,
- or silicon oxide,
- or ammonium hydrogen azelate,
- or ammonium hydrogen azelate and silicon oxide,
- or dodecandioic acid, ammonia water and silicon oxide,
for the manufacture of electrolytic capacitors |
0 % |
31.12.2013 |
| ex38249097 |
46 |
Carboxylic acid anhydride based hardener for epoxide resin, in liquid form, of a specific weight at 25 oC of 1.15 g/cm3 or more but not more than 1,18 g/cm3 |
0 % |
31.12.2013 |
| ex38249097 |
47 |
4-Methoxysalicylaldehyde, dissolved in N-methyl pyrrolidone |
0 % |
31.12.2012 |
| *ex38249097 |
52 |
Poly(tetramethylene glycol) bis[(2-benzoyl-phenoxy)acetate] with an average polymer chain length of less than 5 monomer units |
0 % |
31.12.2013 |
| *ex38249097 |
53 |
Poly(ethylene glycol) bis(p-dimethyl)aminobenzoate with an average polymer chain length of less than 5 monomer units |
0 % |
31.12.2013 |
| *ex38249097 |
54 |
2-Hydroxybenzonitrile, in the form of a solution in N,N-dimethylformamide, containing by weight 45 % or more but not more than 55 % of 2-hydroxybenzonitrile |
0 % |
31.12.2013 |
| *ex38249097 |
60 |
α-Phenoxycarbonyl-ω-phenoxypoly[oxy(2,6-dibromo-1,4-phenylene) isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] |
0 % |
31.12.2013 |
| *ex38249097 |
63 |
Triethylborane, in the form of a solution in tetrahydrofuran |
0 % |
31.12.2013 |
| *ex38249097 |
64 |
Aluminium sodium silicate, in the form of spheres of a diameter of:-
either 1,6 mm or more but not more than 3,4 mm,
- or 4 mm or more but not more than 6 mm
|
0 % |
31.12.2013 |
| ex38249097 |
70 |
Paste containing by weight 75 % or more, but not more than 85 % of copper, and also containing inorganic oxides, ethyl cellulose and a solvent |
0 % |
31.12.2012 |
| *ex38249097 |
72 |
Solution containing by weight 80 % or more of 2.4,6-trimethylbenzaldehyde in acetone |
0 % |
31.12.2013 |
| *ex38249097 |
73 |
Particles of silicon dioxide on which are covalently bonded organic compounds, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges |
0 % |
31.12.2013 |
| *ex38249097 |
75 |
Poly(tetramethylene glycol) bis(9-oxo-9H-thioxanthen-1-yloxy)acetate with an average polymer chain length of less than 5 monomer units |
0 % |
31.12.2013 |
| *ex38249097 |
77 |
Diethylmethoxyborane, in the form of a solution in tetrahydrofuran |
0 % |
31.12.2013 |
| ex38249097 |
78 |
Mixture of phytosterols derived from wood and wood based oils (tall oil), in the form of powder with a particle size not more than 300 μm, containing by weight:-
60 % or more, but not more than 80 % of sitosterols,
- not more than 15 % of campesterols,
- not more than 5 % of stigmasterols,
- not more than 15 % of betasitostanols
|
0 % |
31.12.2012 |
| *ex38249097 |
79 |
Mixture of 80 % (± 10 %) of 1-[2-(2-aminobutoxy)ethoxy]but-2-ylamine and 20 %(± 10 %) of 1-({[2-(2-aminobutoxy)ethoxy]methyl} propoxy)but-2-ylamine |
0 % |
31.12.2013 |
| *ex38249097 |
82 |
α-(2.4,6-Tribromophenyl)-ω-(2.4,6-tribromophenoxy)poly[oxy(2,6-dibromo-1,4-phenylene)isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] |
0 % |
31.12.2013 |
| *ex38249097 |
84 |
Reaction product, containing by weight:-
1 % or more but not more than 40 % of molybdenum oxide,
- 10 % or more but not more than 50 % of nickel oxide,
- 30 % or more but not more than 70 % of tungsten oxide
|
0 % |
31.12.2013 |
| *ex38249097 |
89 |
Oligomer of tetrafluoroethylene, having tetrafluoroiodoethyl end-groups |
0 % |
31.12.2013 |
| *ex38249097 |
90 |
Hollow spheres of fused aluminosilicate containing 65-80 % amorphous aluminosilicate, with the following characteristics:-
a melting point of between 1600oC and 1800 oC,
- a density of 0,6-0,8 g/cm3,
for use in the manufacture of particle filters in motor vehicles |
0 % |
31.12.2013 |
| *ex38249097 |
95 |
Mixture of phytosterols, in the form of flakes, containing by weight 80 % or more of sterols and not more than 4 % of stanols |
0 % |
31.12.2013 |
| *ex38249097 |
97 |
Preparation containing by weight either 10 % or more but not more than 20 % of lithiumfluorophosphate or 5 % or more but not more than 10 % of lithium perchlorate in mixtures of organic solvents |
0 % |
31.12.2013 |
| *ex39011090 |
20 |
Polyethylene, in the form of granules, of a specific gravity of 0,925 (±0,0015), a melt flow index of 0,3 g/10 min (±0,05 g/10 min), for the manufacture of blown films of a Haze value not more than 6 % and an elongation at break (MD/TD) of 210/340 |
0 % |
31.12.2013 |
| *ex39012090 |
10 |
Polyethylene, in one of the forms mentioned in note 6 (b) to Chapter 39, of a specific gravity of 0,945 or more but not more than 0,985, for the manufacture of films for typewriter ribbon or similar ribbon |
0 % |
31.12.2013 |
| *ex39012090 |
20 |
Polyethylene, containing by weight 35 % or more but not more than 45 % of mica |
0 % |
31.12.2013 |
| *ex39019090 |
91 |
Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid |
4 % |
31.12.2013 |
| *ex39019090 |
92 |
Chlorosulphonated polyethylene |
0 % |
31.12.2013 |
| *ex39019090 |
93 |
Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticizer in the manufacture of roof sheets |
0 % |
31.12.2013 |
| *ex39019090 |
94 |
Mixtures of A-B block copolymer of polystyrene and ethylene-butylene copolymer and A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35 % of styrene |
0 % |
31.12.2013 |
| *ex39019090 |
97 |
Chlorinated polyethylene, in the form of powder |
0 % |
31.12.2013 |
| *ex39021000 |
10 |
Polypropylene containing no plasticizer and not more than:-
7 mg/kg of aluminium,
- 2 mg/kg of iron,
- 1 mg/kg of magnesium,
- 8 mg/kg of chloride
|
0 % |
31.12.2013 |
| *ex39021000 |
20 |
Polypropylene, containing no plasticiser,-
of a melting point of more than 150 oC (as determined by the ASTM D 3417 method),
- of a heat of fusion of 15 J/g or more but not more than 70 J/g,
- of an elongation at break of 1000 % or more (as determined by the ASTM D 638 method),
- of a tensile modulus of 69 MPa or more but not more than 379 MPa (as determined by the ASTM D 638 method)
|
0 % |
31.12.2013 |
| *ex39021000 |
30 |
Polypropylene, containing not more than 1 mg/kg of aluminium, 0,05 mg/kg of iron, 1 mg/kg of magnesium and 1 mg/kg of chloride, for use in the manufacture of packaging for disposable contact lenses |
0 % |
31.12.2013 |
| *ex39022000 |
10 |
Polyisobutylene, of an average molecular weight (Mn) of 700 or more but not more than 800 |
0 % |
31.12.2013 |
| *ex39023000 |
91 |
A-B Block copolymer of polystyrene and an ethylene-propylene copolymer, containing by weight 40 % or less of styrene, in one of the forms mentioned in note 6 (b) to Chapter 39 |
0 % |
31.12.2013 |
| *ex39029090 |
52 |
Amorphous poly-alpha-olefin copolymer blend of poly(propylene-co-1-butene) and petroleum hydrocarbon resin |
0 % |
31.12.2013 |
| *ex39029090 |
92 |
Polymers of 4-methylpent-1-ene |
0 % |
31.12.2013 |
| ex39029090 |
93 |
Synthetic poly-alpha-olefin having a viscosity of at least 38 × 10-6m2s-1 (38 centistokes) at 100 oC measured using the ASTM D 445 method |
0 % |
31.12.2011 |
| *ex39029090 |
97 |
Hydrogenated polyisobutene, in liquid form |
0 % |
31.12.2013 |
| ex39029090 |
98 |
Synthetic poly-alpha-olefin with a viscosity at 100o Celsius (measured according to method ASTM D 445) ranging from 3 centistokes to 9 centistokes and obtained by polymerization of a mixture of dodecene and tetradecene, containing a maximum of 40 % of tetradecene |
0 % |
31.12.2011 |
| *ex39031100 |
10 |
White expandable polystyrene beads with a thermal conductivity of not more than 0,034 W/mK at a density of 14,0 kg/m3 (±1,5 kg/m3), containing 50 % recycled material |
0 % |
31.12.2013 |
| *ex39031900 |
30 |
Crystalline polystyrene with a melting point of 268 oC or more but not more than 272 oC and a setting point of 247 oC or more but not more than 252 oC, whether or not containing additives and filling material |
0 % |
31.12.2011 |
| *ex39039090 |
35 |
Copolymer of α-methylstyrene and styrene, having a softening point of more than 113 oC |
0 % |
31.12.2013 |
| *ex39039090ex39119099 |
4050 |
Copolymer of styrene with α-methylstyrene and acrylic acid, of a molecular weight (Mn) of 500 or more but not more than 6000 |
0 % |
31.12.2013 |
| *ex39039090 |
65 |
Copolymer of styrene, butyl acrylate, butyl methacrylate, methyl methacrylate and acrylic acid, in the form of powder, containing by weight 81 (± 1) % of styrene, 6 (± 1) % of butyl acrylate, 5 (± 1) % of butyl methacrylate, 7 (± 1) % of methyl methacrylate and 1 (±0,5) % of acrylic acid |
0 % |
31.12.2013 |
| *ex39039090 |
75 |
Copolymer of styrene and vinyl pyrrolidone, containing by weight not more than 1 % of sodium dodecyl sulphate, in the form of an aqueous emulsion, for the manufacture of goods of subheading 33052000 or of hair dyes of subheading 33059090 |
0 % |
31.12.2013 |
| *ex39039090 |
80 |
Granules of copolymer of styrene and divinylbenzene of a minimum diameter of 150 μm and a maximum diameter of 800 μm and containing by weight:-
minimum 65 % styrene,
- maximum 25 % divinylbenzene
for use in the manufacture of ion exchange resins |
0 % |
31.12.2013 |
| *ex39039090 |
85 |
Copolymer of styrene, butadiene and methyl methacrylate with a notched impact resistance of 106 J/m or more (as determined by the ASTM D256 method) |
0 % |
31.12.2013 |
| *ex39039090 |
86 |
Mixture containing by weight:-
45 % or more but not more than 65 % of polymers of styrene
- 35 % or more but not more than 45 % of poly(phenylene ether)
- not more than 10 % of other additives
|
0 % |
31.12.2013 |
| ex39041000 |
20 |
Poly(vinyl chloride) powder, not mixed with any other substances, with a degree of polymerisation of 1000 (± 100) monomer units, a coefficient of heat transmission (K-value) of 60 or more, but not more than 70, a bulk density of 0,35 g/cm3 or more, but not more than 0,55 g/cm3, a volatile material content of less than 0,35 % by weight, a medium average grain size of 40 μm or more, but not more than 70 μm and a sieve non- passing fraction at a mesh width of 120 μm of not more than 1 % by weight, not containing any vinyl acetate monomers, for the manufacture of battery separators |
0 % |
31.12.2012 |
| *ex39044000 |
91 |
Copolymer of vinyl chloride with vinyl acetate and vinyl alcohol, containing by weight:-
87 % or more but not more than 92 % of vinyl chloride,
- 2 % or more but not more than 9 % of vinyl acetate and
- 1 % or more but not more than 8 % of vinyl alcohol,
in one of the forms mentioned in note 6 (a) or (b) to Chapter 39, for the manufacture of goods of heading No 3215 or 8523 or for use in the manufacture of coatings for containers and closures of a kind used for preserving food and drink |
0 % |
31.12.2013 |
| *ex39044000 |
93 |
Copolymer of vinyl chloride and methyl acrylate, containing by weight 80 (± 1) % of vinyl chloride and 20 (± 1) % of methyl acrylate, in the form of a aqueous emulsion |
0 % |
31.12.2013 |
| *ex39046100 |
10 |
Mixture of polytetrafluoroethylene and mica, in one of the forms mentioned in note 6 (b) to Chapter 39 |
0 % |
31.12.2013 |
| *ex39046100 |
20 |
Copolymer of tetrafluoroethylene and trifluoro(heptafluoropropoxy)ethylene, containing 3,2 % or more but not more than 4,6 % by weight of trifluoro(heptafluoropropoxy)ethylene and less than 1 mg/kg of extractable fluoride ions |
0 % |
31.12.2013 |
| *ex39046100 |
30 |
Polytetrafluoroethylene, in the form of powder, of a specific surface of 8 m2/g or more but not more than 12 m2/g, a particle size distribution of 10 % of less than 10 μm and 90 % of less than 35 μm and an average particle size of 20 μm |
0 % |
31.12.2013 |
| *ex39046990 |
93 |
Copolymer of ethylene with chlorotrifluoroethylene, in one of the forms mentioned in note 6 (b) to Chapter 39 |
0 % |
31.12.2013 |
| *ex39046990 |
94 |
Copolymer of ethylene and tetrafluoroethylene |
0 % |
31.12.2013 |
| *ex39046990 |
96 |
Polychlorotrifluoroethylene, in one of the forms mentioned in note 6 (a) and (b) to Chapter 39 |
0 % |
31.12.2013 |
| *ex39046990 |
97 |
Copolymer of chlorotrifluoroethylene and vinylidene difluoride |
0 % |
31.12.2013 |
| *ex39059990 |
94 |
Polymer of vinylpyrrolidone and dimethylaminoethyl methacrylate, containing by weight 97 % or more but not more than 99 % of vinylpyrrolidone, in the form of a solution in water |
0 % |
31.12.2013 |
| *ex39059990 |
95 |
Hexadecylated or eicosylated polyvinylpyrrolidone |
0 % |
31.12.2013 |
| *ex39059990 |
96 |
Polymer of vinyl formal, in one of the forms mentioned in note 6 (b) to Chapter 39, of a molecular weight (Mw) of 25000 or more but not more than 150000 and containing by weight:-
9,5 % or more but not more than 13 % of acetyl groups evaluated as vinyl acetate and
- 5 % or more but not more than 6,5 % of hydroxy groups evaluated as vinyl alcohol
|
0 % |
31.12.2013 |
| *ex39059990 |
97 |
Povidone (INN)-iodine |
0 % |
31.12.2013 |
| *ex39059990 |
98 |
Poly(vinyl pyrrolidone) partially substituted by triacontyl groups, containing by weight 78 % or more but not more than 82 % of triacontyl groups |
0 % |
31.12.2013 |
| *39069060 |
|
Copolymer of methyl acrylate with ethylene and a monomer containing a non-terminal carboxy group as a substituent, containing by weight 50 % or more of methyl acrylate, whether or not mixed with silicon dioxide |
0 % |
31.12.2013 |
| *ex39069090 |
10 |
Polymerization product of acrylic acid with small quantities of a polyunsaturated monomer, for the manufacture of medicaments of heading No 3003 or 3004 |
0 % |
31.12.2013 |
| *ex39069090 |
15 |
Photosensitive resin consisting of modified acrylate, acrylic monomer, catalyst (photoinitiator) and stabilizer |
0 % |
31.12.2013 |
| *ex39069090 |
20 |
Polymerization product of acrylic acid with small quantities of a polyunsaturated monomer, for use as a stabilizer in emulsions or dispersions with a pH of more than 13 |
6 % |
31.12.2013 |
| *ex39069090 |
30 |
Copolymer of styrene with hydroxyethyl methacrylate and 2-ethylhexyl acrylate, of a molecular weight (Mn) of 500 or more but not more than 6000 |
0 % |
31.12.2013 |
| *ex39069090 |
50 |
Polymers of esters of acrylic acid with one or more of the following monomers in the chain:-
chloromethyl vinyl ether,
- chloroethyl vinyl ether,
- chloromethylstyrene,
- vinyl chloroacetate,
- methacrylic acid,
- butenedioic acid monobutyl ester,
containing by weight not more than 5 % of each of the monomeric units, in one of the forms mentioned in note 6 (b) to Chapter 39 |
0 % |
31.12.2013 |
| *ex39069090 |
80 |
Polydimethylsiloxane-graft-(polyacrylates; polymethacrylates) |
0 % |
31.12.2013 |
| *ex39069090 |
85 |
Non aqueous dispersion type polymers of esters of acrylic acid with a hydrolyzable silyl group at one or both polymer ends |
0 % |
31.12.2013 |
| *ex39072011 |
10 |
Poly(ethylene oxide) of an average molecular weight (Mn) of 100000 or more |
0 % |
31.12.2013 |
| *ex39072011 |
20 |
Bis[Methoxypoly[ethyleneglycol)]-maleimidopropionamide, chemically modified with lysine, of an average molecular weight (Mn) of 40000 |
0 % |
31.12.2013 |
| *ex39072011 |
30 |
Bis[Methoxypoly[ethyleneglycol)], chemically modified with lysine, bis(maleimide) terminated, of an average molecular weight (Mn) of 40000 |
0 % |
31.12.2013 |
| *ex39072021 |
10 |
Mixture, containing by weight 70 % or more but not more than 80 % of a polymer of glycerol and 1,2-epoxypropane and 20 % or more but not more than 30 % of a copolymer of dibutyl maleate and N-vinyl-2-pyrrolidone |
0 % |
31.12.2013 |
| *ex39072021 |
20 |
Copolymer of tetrahydrofuran and tetrahydro-3-methylfuran with an average molecular weight of 3500 (± 100) |
0 % |
31.12.2013 |
| *ex39072029 |
10 |
Products containing co-polymers of dextrose, sorbitol and citric or phosphoric acid, containing not less than 90 % by weight of co-polymers on the ashfree and anhydrous basis |
0 % |
31.12.2011 |
| *ex39072099 |
15 |
Poly(oxypropylene) having alkoxysilyl end-groups |
0 % |
31.12.2013 |
| *ex39072099 |
30 |
Homopolymer of 1-chloro-2,3-epoxypropane (epichlorohydrin) |
0 % |
31.12.2013 |
| *ex39072099 |
35 |
Polyethylene glycol chemically modified with an isocyanate group containing a carbodiimide group, in the form of a solution in 2-methoxy-1-methylethyl acetate |
0 % |
31.12.2013 |
| *ex39072099 |
45 |
Copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy end-groups |
0 % |
31.12.2013 |
| *ex39073000ex39269097 |
4070 |
Epoxide resin, containing by weight 70 % or more of silicon dioxide, for the encapsulation of goods of heading No 8533, 8535, 8536, 8541, 8542 or 8548 |
0 % |
31.12.2013 |
| *ex39073000 |
50 |
Liquid epoxide resin of 2-propenenitrile/1,3-butadiene-epoxide copolymer, not containing any solvent, with:-
a zinc borate hydrate content of not more than 40 % by weight,
- a diantimony trioxide content of not more than 5 % by weight
|
0 % |
31.12.2013 |
| *ex39076080 |
10 |
Copolymer of terephthalic acid and isophthalic acid with ethylene glycol, butane-1,4-diol and hexane-1,6-diol |
0 % |
31.12.2013 |
| *ex39076080 |
30 |
Oxygen binding concentrate consisting of a blend of:-
a copolymer obtained from polyethylene terephthalate, pyromellitic dianhydride (PMDA) and a hydroxyl substituted polybutadiene
- a barrier co-polymer (as determined by the ASTM method F1115-95 (2001)) obtained from xylylene diamines and adipic acid, and
- organic dyes and/or organic and inorganic pigments
where the first co-polymer predominates |
0 % |
31.12.2013 |
| *39077000 |
|
Poly(lactic acid) |
0 % |
31.12.2013 |
| *ex39079919ex39079998 |
1010 |
Poly(oxy-1,4-phenylenecarbonyl), in the form of powder |
0 % |
31.12.2013 |
| *ex39079919 |
20 |
Liquid crystal copolyester with a melting point of not less than 270 oC, whether or not containing fillers |
0 % |
31.12.2013 |
| ex39079919 |
50 |
Semi-crystalline polycyclohexylenedimethylene terephthalate polymer resin, containing by weight 10 % or more but not more than 40 % of glass fibre, in the form of granules or pellets |
0 % |
31.12.2011 |
| ex39079919 |
60 |
Copolymer of terephthalic acid and isophthalic acid with bisphenol A |
0 % |
31.12.2012 |
| *ex39089000 |
20 |
Copolymer consisting of hexamethylenediamine, isophthalic acid and terephthalic acid, in one of the forms mentioned in note 6(b) to Chapter 39 |
0 % |
31.12.2013 |
| *ex39089000 |
30 |
Reaction product of mixtures of octadecanecarboxylic acids polymerised with an aliphatic polyetherdiamine |
0 % |
31.12.2013 |
| *ex39089000 |
50 |
Oxygen binding concentrate consisting of a blend of:-
a copolymer obtained from polyethylene terephthalate, pyromellitic dianhydride (PMDA) and a hydroxyl substituted polybutadiene
- a barrier co-polymer (as determined by the ASTM method F1115-95 (2001)) obtained from xylylene diamines and adipic acid, and
- organic dyes and/or organic and inorganic pigments
where the second co-polymer predominates |
0 % |
31.12.2013 |
| *ex39094000 |
10 |
Polycondensation product of phenol with formaldehyde, in the form of hollow spheres of a diameter of less than 150 μm |
0 % |
31.12.2013 |
| *ex39100000 |
20 |
Block copolymer of poly(methyl-3.3,3-trifluoropropylsiloxane) and poly[methyl(vinyl)siloxane] |
0 % |
31.12.2013 |
| ex39100000 |
40 |
Biocompatible silicones for the manufacture of long term surgical implants |
0 % |
31.12.2011 |
| ex39100000 |
50 |
Silicone based pressure sensitive adhesive in solvent containing copoly(dimethylsiloxane/diphenylsiloxane) gum |
0 % |
31.12.2012 |
| ex39111000 |
81 |
Non-hydrogenated Hydrocarbon Resin, obtained by polymerization of C-5 to C-10 alkenes, cyclopentadiene and dicyclopentadiene, with a Gardner Color of more than 10 for the pure product or with a Gardner Color of more than 8 for the 50 % solution by volume in toluene (as determined by the ASTM method D6166) |
0 % |
31.12.2013 |
| ex39119019 |
30 |
Copolymer of ethyleneimine and ethyleneimine dithiocarbamate, in an aqueous solution of sodium hydroxide |
0 % |
31.12.2012 |
| *ex39119099 |
25 |
Copolymer of vinyltoluene and α-methylstyrene |
0 % |
31.12.2013 |
| *ex39119099 |
40 |
Mixed calcium and sodium salt of a copolymer of maleic acid and methyl vinyl ether, having a calcium content of 9 % or more but not more than 16 % by weight |
0 % |
31.12.2013 |
| *ex39119099 |
45 |
Copolymer of maleic acid and methyl vinyl ether |
0 % |
31.12.2013 |
| *ex39119099 |
65 |
Calcium zinc salt of a copolymer of maleic acid and methyl vinyl ether |
0 % |
31.12.2013 |
| ex39119099 |
86 |
Copolymer of methyl vinyl ether and maleic acid anhydride |
0 % |
31.12.2011 |
| *ex39123910 |
10 |
Ethylcellulose, not plasticized |
0 % |
31.12.2013 |
| *ex39123910 |
20 |
Ethylcellulose, in the form of an aqueous dispersion containing hexadecan-1-ol and sodium dodecyl sulphate, containing by weight 27 (± 3) % of ethylcellulose |
0 % |
31.12.2013 |
| *ex39123980 |
20 |
Cellulose, both hydroxyethylated and alkylated with alkyl chain-lengths of 3 or more carbon atoms |
0 % |
31.12.2013 |
| *ex39129010 |
10 |
Cellulose acetate propionate, non-plasticised, in the form of powder:-
containing by weight 25 % or more of propionyl (as determined by the ASTM D 817-72 method) and
- of a viscosity of not more than 120 poise (as determined by the ASTM D 817-72 method),
for the manufacture of printing inks, paints, lacquers and other coatings, and reprographic coatings |
0 % |
31.12.2013 |
| *ex39129010 |
20 |
Hydroxypropyl methylcellulose phthalate |
0 % |
31.12.2013 |
| *ex39139000 |
81 |
Blend of cyanoethyl pullulan and cyanoethyl poly(vinyl alcohol) |
0 % |
31.12.2013 |
| *ex39139000 |
92 |
Protein, chemically modified by carboxylation and/or phthalic acid addition, having a molecular weight of 100000 to 300000 |
0 % |
31.12.2013 |
| *ex39139000 |
94 |
Granules containing by weight:-
35 % or more but less than 75 % of a high amylose extruded biopolymer produced from corn starch,
- 5 % or more but less than 16 % polyvinyl alcohol,
- 10 % or more but less than 46 % of polyol plasticisers,
- 0,25 % or more but less than 3 % of stearic acid,
- whether or not containing 30 % (± 10 %) of biodegradable polyester resin but never to a level that exceeds the amount of the high amylose biopolymer
|
0 % |
31.12.2011 |
| *ex39139000 |
95 |
Chondroitinsulphuric acid, sodium salt |
0 % |
31.12.2013 |
| ex39139000 |
96 |
Powder consisting of 90 % (± 5 %) by weight of a high amylose extruded biopolymer produced from corn starch, 10 % (± 5 %) by weight of a synthetic polymer and 0,5 % (±0,25 %) of stearic acid |
0 % |
31.12.2011 |
| *ex39139000 |
98 |
Sodium hyaluronate |
0 % |
31.12.2013 |
| *ex39173239 |
20 |
Pipe consisting of a block copolymer of polytetrafluoroethylene and polyperfluoroalkoxytrifluoroethylene, of a length of not more than 600 mm, a diameter of not more than 85 mm and a wall-thickness of 30 μm or more but not more than 110 μm |
0 % |
31.12.2013 |
| *ex39191019ex39191038ex39199038 |
102010 |
Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film |
0 % |
31.12.2013 |
| *ex39191019 |
20 |
Rolls of two-sided adhesive tape:-
coated with non-vulcanised natural or synthetic rubber
- with a width of 20 mm or more but not more than 40 mm
- containing silicone, aluminium hydroxide, acryl and urethane
|
0 % |
31.12.2013 |
| *ex39191031ex39191038ex39199031ex39206100 |
10305020 |
Reflecting laminated sheet, consisting of a film of polycarbonate totally embossed on one side in a regular shaped pattern, covered on both sides with one or more layers of plastic material, whether or not covered on one side with an adhesive layer and a release sheet |
0 % |
31.12.2013 |
| ex39191038 |
40 |
Double-sided, self-adhesive modified epoxy resin foil, put up in rolls, 10 to 20 cm wide, 10 to 210 m long and with a total thickness of 10 to 50 μm, not for retail sale |
0 % |
31.12.2011 |
| *ex39191061 |
91 |
Reflecting film, consisting of a layer of poly(vinyl chloride), a layer of alkyd polyester, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, only visible by means of a retroreflecting lighting, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film |
0 % |
31.12.2013 |
| ex39191061ex39199061 |
9295 |
Black polyvinyl chloride film having a high gloss of more than 90 degrees as determined by test method ASTM D 2457 covered on one side with a protective polyethylene terephthalate film and on the other side a pressure sensitive adhesive with channels and a polyethylene terephthalate release liner |
0 % |
31.12.2011 |
| ex39191061ex39199061 |
9396 |
Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38 mm or more but not more than 1,53 mm |
0 % |
31.12.2012 |
| *ex39191061ex39191069ex39199061ex39199069 |
94929393 |
Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 μm or more and an adhesive part of acrylic tape of a thickness of 5 μm or more, for the protection of the surface of silicon discs |
0 % |
31.12.2013 |
| ex39191069ex39199069 |
9196 |
Acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic pressure sensitive adhesive and a release sheet, of a peel adhesion at an angle of 90o of more than 25 N/cm (as determined by the ASTM D 3330 method) |
0 % |
31.12.2012 |
| *ex39191069 |
95 |
Reflecting laminated sheet showing a regular pattern, consisting of a film of poly(methylmethacrylate), followed by a layer of acrylic polymer containing microprisms, a film of poly(methylmethacrylate), an adhesive layer and a release sheet |
0 % |
31.12.2013 |
| *ex39199031 |
45 |
Transparent poly(ethylene terephtalate) self-adhesive film, free from impurities or faults, coated on one side with an acrylic pressure sensitive adhesive and a protective liner, and on the other side having an antistatic layer of ionic based organic compound choline and a printable dust-proof layer of modified long chain alkyl organic compound, having a total thickness without the liner of 54 μm or more but not more than 64 μm and a width of more than 1295 mm but not more than 1305 mm |
0 % |
31.12.2013 |
| *ex39199031 |
60 |
Film consisting of 1 to 3 laminated layers of poly(ethylene terephthalate) and a copolymer of terephthalic acid, sebacic acid and ethylene glycol, coated on one side with an acrylic abrasion resistant coating and on the other side with an acrylic pressure sensitive adhesive, a water soluble methylcellulose coating and a poly(ethylene terephthalate) protective liner |
0 % |
31.12.2013 |
| ex39199031 |
65 |
Film consisting of a multi-layer construction of poly(ethylene terephthalate) and copolymer of butylacrylate and methylmethacrylate, coated on one side with an acrylic abrasion resistant coating incorporating nanoparticles of antimony tin oxide and carbon black, and on the other side with an acrylic pressure sensitive adhesive and a silicone-coated poly(ethylene terephthalate) protective liner |
0 % |
31.12.2012 |
| *ex39199031 |
75 |
Poly(ethylene terephthalate) film, with an adhesive strength of not more than 0,147 N/25 mm and an electrostatic discharge of not more than 500 V |
0 % |
31.12.2013 |
| ex39199031 |
80 |
Polyester film coated on both sides with an acrylic and/or rubber pressure sensitive adhesive put up in rolls of a width of 45,7 cm or more but not more than 78,5 cm (supplied with a release liner) |
0 % |
31.12.2012 |
| *ex39199061 |
51 |
Transparent poly(ethylene) self-adhesive film, free from impurities or faults, coated on one side with an acrylic pressure sensitive adhesive, with a thickness of 60 μm or more, but not more than 70 μm, and with a width of more than 1245 mm but not more than 1255 mm |
0 % |
31.12.2013 |
| *ex39199061 |
52 |
Reflecting layered sheet on rolls, with a width of more than 20 cm, showing an embossed regular pattern, consisting of polyvinyl chloride film coated on one side with a layer, based on acryl polymers and on the other side:-
a layer of polyurethane containing glass micro beads,
- an adhesive layer, and
- a release sheet
|
0 % |
31.12.2013 |
| *ex39199061ex39199069 |
9292 |
Poly(vinyl chloride) sheeting, of a thickness of less than 1 mm, coated with an adhesive in which are embedded glass balls of a diameter of not more than 100 μm |
0 % |
31.12.2013 |
| *ex39199061ex90012000 |
9740 |
Polarizer film, in rolls, consisting of a multilayered polyvinyl alcohol film, supported on either side by a triacetyl cellulose film, with a pressure sensitive adhesive and release film on one side |
0 % |
31.12.2012 |
| *ex39199069 |
94 |
Reflecting laminated sheet consisting of a film of poly(methyl methacrylate) embossed on one side in a regular shaped pattern, a film of a polymer containing glass microspheres, an adhesive layer and a release sheet |
0 % |
31.12.2013 |
| *ex39199069ex39205100 |
9530 |
Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not more than 90 μm, whether or not covered on one side with an adhesive layer and a release sheet |
0 % |
31.12.2013 |
| ex39199069 |
97 |
Rolls of biaxially oriented polypropylene film with:-
a self adhesive coating,
- a width of 363 mm or more, but not more than 507 mm,
- a total film thickness of 10 μm or more but not more than 100 μm,
for use in the protection of LCD displays during the manufacturing of LCD modules |
0 % |
31.12.2012 |
| *ex39201026ex39201089 |
3020 |
Film of a thickness of not more than 0,20 mm, of a blend of polyethylene and a copolymer of ethylene with oct-1-ene, embossed in a regular rhomboidal pattern, for coating both sides of a layer of unvulcanized rubber |
0 % |
31.12.2013 |
| *ex39201026 |
40 |
Film of polyethylene, of a kind used for typewriter ribbon |
0 % |
31.12.2013 |
| *ex39201028 |
91 |
Poly(ethylene) film of a thickness of 19 μm (± 1), printed with a graphic design which consists of eight different colours on one side of the film, and one colour on the opposite side, the graphic design also has the following characteristics:-
is repetitive and equally spaced along the length of the film
- is equally and visibly aligned when viewed from the back or front of the film
|
0 % |
31.12.2013 |
| ex39201089 |
40 |
Composite sheet containing an acrylic coating and laminated to a high-density polyethylene layer, of a total thickness of 0,8 mm or more but not more than 1,2 mm |
0 % |
31.12.2011 |
| *ex39202021 |
30 |
Biaxially oriented polypropylene film with a coextruded layer of polyethylene on one side and a total thickness of 11,5 μm or more but not more than 13,5 μm. |
0 % |
31.12.2013 |
| *ex39202029 |
92 |
Mono-axial oriented film, of a total thickness of not more than 75 μm, consisting of two or three layers, each layer containing a mixture of polypropylene and polyethylene, with a core layer whether or not containing titanium dioxide, having:-
a tensile strength in the machine direction of 175 MPa or more but not more than 270 MPa and
- a tensile strength in the transverse direction of 20 MPa or more but not more than 40 MPa
as determined by test method ASTM D882/ISO 527-3 |
0 % |
31.12.2013 |
| *ex39202090 |
92 |
Laminated sheet or strip, consisting of a film of a thickness of 181 μm or more but not more than 223 μm composed of a blend of a copolymer of propylene with ethylene and a copolymer of styrene-ethylene-butylene-styrene (SEBS) coated or covered on one side with a layer of a copolymer of styrene-ethylene-butylene-styrene (SEBS) and a layer of polyester |
0 % |
31.12.2013 |
| *ex39204310 |
92 |
Sheeting of poly(vinyl chloride), stabilized against ultraviolet rays, without any holes, even microscopic, of a thickness of 60 μm or more but not more than 80 μm, containing 30 or more but not more than 40 parts of plasticizer to 100 parts of poly(vinyl chloride) |
0 % |
31.12.2013 |
| *ex39204310ex39204910 |
9493 |
Film of a specular gloss of 70 or more, measured at an angle of 60o using a glossmeter (as determined by the ISO 2813:2000 method), consisting of one or two layers of poly(vinyl chloride) coated on both sides with a layer of plastic, of a thickness of 0,26 mm or more but not more than 1,0 mm, covered on the gloss surface with a protective film of polyethylene, in rolls of a width of 1000 mm or more but not more than 1450 mm, for use in the manufacture of goods of heading No 9403 |
0 % |
31.12.2013 |
| *ex39204310 |
95 |
Reflecting laminated sheet, consisting of a film of poly(vinyl chloride) and a film of an other plastic totally embossed in a regular pyramidal pattern, covered on one side with a release sheet |
0 % |
31.12.2013 |
| *ex39204310 |
96 |
Film, of a specular gloss of 70 or more measured at an angle of 60o using a glossmeter (as determined by the ISO 2813:2000 method), consisting of a layer of poly(ethylene terephthalate) and a layer of coloured poly(vinyl chloride), for coating panels and doors of a kind used in the manufacture of domestic appliances |
0 % |
31.12.2013 |
| *ex39204310 |
97 |
Film embossed to a depth of not more than 12 μm, of a specular gloss of 7 or more but not more than 17, measured at an angle of 60o using a glossmeter (as determined by the ISO 2813:2000 method), consisting of at least two layers of poly(vinyl chloride), of a total thickness of not more than 0,5 mm, covered on the embossed side with a protective film, in rolls of a width of 1400 mm or more but not more than 1420 mm, for use in the manufacture of goods of heading No 9403 |
0 % |
31.12.2013 |
| *ex39205100 |
10 |
Poly(methyl methacrylate) plate, with an antistatic coating, of dimensions of 738 × 972 mm (±1,5 mm) |
0 % |
31.12.2013 |
| *ex39205100 |
20 |
Plate of poly(methyl methacrylate) containing aluminium trihydroxide, of a thickness of 3,5 mm or more but not more than 19 mm |
0 % |
31.12.2013 |
| *ex39205100 |
40 |
Sheets of polymethylmethacrylate plastic complying with standards EN 4364 (MIL-P-5425E), EN 4365 (MIL-P-8184) and EN 4366 (MIL-PRF-25690) |
0 % |
31.12.2013 |
| ex39205990 |
10 |
Non-cellular and non-laminated sheet of modified copolymer of acrylonitrile-methyl acrylate with a thickness of 1,0 mm or more but not more than 1,3 mm, put up in rolls |
0 % |
31.12.2011 |
| *ex39206219ex39206219 |
0103 |
Coextruded opaque sheet of poly(ethylene terephthalate), of a thickness of 50 μm or more but not more than 350 μm, consisting especially of a layer containing carbon black |
0 % |
31.12.2013 |
| *ex39206219ex39206219 |
0709 |
Poly(ethylene terephtalate) film, not coated with an adhesive, of a thickness of not more than 25 μm, either:-
only dyed in the mass, or
- dyed in the mass and metallized on one side
|
0 % |
31.12.2013 |
| *ex39206219ex39206219 |
1113 |
Film of poly(ethylene terephthalate) only, of a total thickness of not more than 120 μm, consisting of one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material |
0 % |
31.12.2013 |
| ex39206219ex39206219 |
1416 |
Poly(ethylene terephthalate) film, of a thickness of 20 μm or more but not more than 150 μm, coated on one side with silicone, for use in the manufacture of window film |
3 % |
31.12.2011 |
| *ex39206219ex39206219 |
1719 |
Laminated film of poly(ethylene terephthalate) only, of a total thickness of not more than 120 μm, consisting of one layer which is metallised only and one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material |
0 % |
31.12.2013 |
| *ex39206219ex39206219 |
2123 |
Film of poly(ethylene terephthalate), coated or covered on one side or on both sides with a layer of modified polyester, of a total thickness of 7 μm or more but not more than 11 μm, for the manufacture of video tapes with a magnetic layer of metallic pigments and a width of 8 mm or of 12,7 mm |
0 % |
31.12.2013 |
| *ex39206219ex39206219 |
3739 |
Poly(ethylene terephthalate) film, of a thickness of not more than 12 μm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35 nm |
0 % |
31.12.2013 |
| *ex39206219ex39206219 |
4143 |
Poly(ethylene terephthalate) film, of a thickness of 18 μm or more but not more than 25 μm, having:-
a shrinkage of (3,4 ±0,1) % in the machine direction (as determined by the ASTM D 1204 method) and
- a shrinkage of (0,3 ±0,2) % in the transverse direction (as determined by the ASTM D 1204 method)
|
0 % |
31.12.2013 |
| *ex39206219ex39206219 |
5153 |
Film of poly(ethylene terephthalate), poly(ethylene naphtalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness of not more than 300 μm and having a surface resistivity of not more than 10000 ohms (per square) (as determined by the ASTM D 257-99 method) |
0 % |
31.12.2013 |
| *ex39206219ex39206219 |
5456 |
Matt film of poly(ethylene terephthalate), of a specular gloss of 15 measured at an angle of 45o and 18 measured at an angle of 60o using a glossmeter (as determined by the ISO 2813:2000 method) and a width of 1600 mm or more |
0 % |
31.12.2013 |
| *ex39206219ex39206219 |
5759 |
Film of white poly(ethylene terephthalate), dyed in the mass, of a thickness of 185 μm or more but not more than 253 μm, coated on both sides with an antistatic layer |
0 % |
31.12.2013 |
| *ex39206219ex39206900 |
7340 |
Iridescent film of polyester and poly(methyl methacrylate) |
0 % |
31.12.2013 |
| ex39206219ex39206219 |
8082 |
Poly(ethylene terephtalate) film of a thickness of not more than 20 μm, coated on both sides with a gas barrier layer consisting of a polymeric matrix in which silica has been dispersed and of a thickness of not more than 2 μm |
0 % |
31.12.2012 |
| *ex39206219 |
88 |
Laminated sheet, consisting of a biaxially oriented film of poly(ethylene terephthalate), covered on one side or on both sides with a layer of poly(ethylene terephthalate), for use in the manufacture of identity cards, credit cards and similar products (including "smart" cards) |
0 % |
31.12.2013 |
| *ex39206900 |
20 |
Film of poly(ethylene naphthalene-2,6-dicarboxylate) |
0 % |
31.12.2013 |
| ex39207990 |
10 |
Cellulose acetyl butyrate film, whether or not combined with a polycarbonate layer, of a thickness of not more than 0,81 mm containing a micro-louvre with a typical viewing angle of 30 degrees measured on each side of the surface normal |
0 % |
31.12.2012 |
| *ex39209100 |
91 |
Poly(vinyl butyral) film having a graduated coloured band |
3 % |
31.12.2013 |
| *ex39209100 |
92 |
Plasticized film of polyvinyl butyral, containing by weight:-
either 14,5 % or more but not more than 17,5 % of dihexyl adipate,
- or 14,5 % or more but not more than 28,5 % of dibutyl sebacate
|
0 % |
31.12.2013 |
| *ex39209100 |
93 |
Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having the following characteristics:-
a visible light transmission of 50 % or more,
- coated on one or both sides with a layer of poly(vinyl butyral) but not coated with an adhesive or any other material except poly(vinyl butyral),
- a total thickness of not more than 0,2 mm without taking the presence of poly(vinyl butyral) into account,
for use in the manufacture of heat-reflecting or decorative laminated glass |
0 % |
31.12.2013 |
| ex39209200 |
30 |
Polyamide film of a thickness of not more than 20 μm, coated on both sides with a gas barrier layer which consists of a polymeric matrix in which silica has been dispersed and of a thickness of not more than 2 μm |
0 % |
31.12.2012 |
| *ex39209928 |
40 |
Mono-axially oriented polymer film containing the following monomers:-
Poly (tetramethylene ether glycol),
- Bis (4-isocyanotocyclohexyl) methane,
- 1,4-Butanediol or 1,3-Butanediol,
- with a thickness of 0,25 mm or more but not more than 5,0 mm,
- embossed with a regular pattern on one surface,
- and covered with a release sheet
|
0 % |
31.12.2013 |
| ex39209928 |
50 |
Thermoplastic polyurethane film, of a thickness of 250 μm or more but not more than 350 μm, covered on one side with a removable protective film |
0 % |
31.12.2011 |
| *ex39209959 |
25 |
Poly(1-chlorotrifluoroethylene) film |
0 % |
31.12.2013 |
| *ex39209959 |
50 |
Polytetrafluoroethylene film, non-microporous, in the form of rolls, of a thickness of 0,019 mm or more but not more than 0,14 mm, impermeable to water vapour |
0 % |
31.12.2013 |
| *ex39209959 |
55 |
Ion-exchange membranes of fluorinated plastic material |
0 % |
31.12.2013 |
| *ex39209959 |
60 |
Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34 μm or more but not more than 90 μm, a tensile strength at break of 20 MPa or more but not more than 45 MPa and an elongation at break of 250 % or more but not more than 900 % |
0 % |
31.12.2013 |
| *ex39209990 |
20 |
Anisotropic conductive film, in rolls, of a width of 1,5 mm or more but not more than 3,15 mm and a maximum length of 300 m, used for joining electronic components in the production of LCD or plasma displays |
0 % |
31.12.2013 |
| *ex39211310 |
10 |
Sheet of polyurethane foam, of a thickness of 3 mm (± 15 %) and of a specific gravity of 0,09435 or more but not more than 0,10092 |
0 % |
31.12.2013 |
| *ex39211900 |
91 |
Microporous polypropylene film of a thickness of not more than 100 μm |
0 % |
31.12.2013 |
| *ex39211900 |
95 |
Film of polyethersulfone, of a thickness of not more than 200 μm |
0 % |
31.12.2013 |
| *ex39211900 |
96 |
Cellular film, consisting of a layer of polyethylene of a thickness of 90 μm or more but not more than 140 μm and a layer of regenerated cellulose of a thickness of 10 μm or more but not more than 40 μm |
0 % |
31.12.2013 |
| *ex39219019 |
45 |
Composite plate of poly(ethylene terephthalate) or of poly(butylene terephthalate), reinforced with glass fibres |
0 % |
31.12.2013 |
| *ex39219019 |
55 |
Poly(ethylene terephthalate) film, laminated on one side or on both sides with a layer of unidirectional nonwoven poly(ethylene terephthalate) and impregnated with polyurethane or epoxide resin |
0 % |
31.12.2013 |
| *ex39219055 |
20 |
Pre-impregnated reinforced fibreglass containing cyanate ester resin or bismaleimide (B) triazine (T) resin mixed with epoxide resin, measuring:-
469,9 mm (± 2 mm) × 622,3 mm (± 2 mm), or
- 469,9 mm (± 2 mm) × 414,2 mm (± 2 mm), or
- 546,1 mm (± 2 mm) × 622,3 mm (± 2 mm)
|
0 % |
31.12.2013 |
| *ex39219060ex54077100ex59039099 |
912010 |
Woven polytetrafluoroethylene fabric, coated or covered with a copolymer of tetrafluoroethylene and trifluoroethylene having perfluorinated alkoxy side-chains ending in carboxylic acid or sulphonic acid groups, whether or not in the potassium or sodium salt form |
0 % |
31.12.2013 |
| *ex39219060 |
93 |
Film, of a specular gloss of 30 or more but not more than 60 measured at an angle of 60o using a glossmeter (as determined by the ISO 2813:2000 method), consisting of a layer of poly(ethylene terephthalate) and a layer of coloured poly(vinyl chloride), joined by a metallized adhesive coating, for coating panels and doors of a kind used in the manufacture of domestic appliances |
0 % |
31.12.2013 |
| *ex39233090 |
10 |
Polyethylene container, for compressed hydrogen:-
with aluminium bosses at both ends,
- wholly embedded in an overwrap of carbon fibres impregnated with epoxide resin,
- of a diameter of 213 mm or more, but not more than 368 mm,
- a length of 860 mm or more, but not more than 1260 mm and
- a capacity of 18 litres or more, but not more than 50 litres
|
0 % |
31.12.2013 |
| *ex39269092 |
20 |
Reflecting sheeting or tape, consisting of a facing-strip of poly(vinyl chloride) embossed in a regular pyramidal pattern, heat-sealed in parallel lines or in a grid-pattern to a backing-strip of plastic material, or of knitted or woven fabric covered on one side with plastic material |
0 % |
31.12.2013 |
| *ex39269097 |
10 |
Microspheres of a polymer of divinylbenzene, of a diameter of 4,5 μm or more but not more than 80 μm |
0 % |
31.12.2013 |
| *ex39269097 |
15 |
Glass fibre reinforced plastic traverse leaf spring for use in the manufacture of motor vehicle suspension systems |
0 % |
31.12.2013 |
| *ex39269097 |
25 |
Unexpansible microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate, of a diameter of 3 μm or more but not more than 4,6 μm |
0 % |
31.12.2013 |
| *ex39269097 |
55 |
Flat product of polyethylene, perforated in opposing directions, of a thickness of 600 μm or more but not more than 1200 μm and of a weight of 21 g/m2 or more but not more than 42 g/m2 |
0 % |
31.12.2013 |
| *ex40070000 |
10 |
Siliconated vulcanised rubber thread and cord |
0 % |
31.12.2013 |
| *ex40169997 |
20 |
Soft rubber sealing stoppers for the manufacture of electrolytic capacitors |
0 % |
31.12.2013 |
| *41051010410510904105309141053099 |
|
Sheep or lamb skin leather, without wool on, tanned or retanned but not further prepared, whether or not split, other than leather of heading No 4 114 |
0 % |
31.12.2013 |
| *4106211041062290 |
|
Goat or kid skin leather, without hair on, tanned or retanned but not further prepared, whether or not split, other than leather of heading No 4 114 |
0 % |
31.12.2013 |
| *41063110410632904106409041069200 |
|
Leather of other animals, without hair on, not further prepared than tanned, other than leather of heading No 4 114 |
0 % |
31.12.2013 |
| ex50040010 |
10 |
Silk yarn (other than yarn spun from silk waste) not put up for retail sale, unbleached, scoured or bleached, entirely of silk |
0 % |
31.12.2011 |
| ex50040090 |
10 |
Yarn spun entirely from silk, not put up for retail sale |
2,5 % |
31.12.2011 |
| *ex50050010ex50050090 |
1010 |
Yarn spun entirely from silk waste (noil), not put up for retail sale |
0 % |
31.12.2013 |
| *ex52053100 |
10 |
Six ply yarn of bleached cotton, measuring 925 dtex or more but not more than 989 dtex per single yarn, for the manufacture of tampons |
0 % |
31.12.2013 |
| *52081110 |
|
Fabrics for the manufacture of bandages, dressings and medical gauzes |
5,2 % |
31.12.2013 |
| *ex54024500 |
20 |
Yarn of synthetic textile fibres solely of aromatic polyamides obtained by the polycondensation of m-phenylenediamine and isophthalic acid |
0 % |
31.12.2013 |
| *ex54024700 |
10 |
Synthetic bicomponent filament yarn, not textured, untwisted, measuring 1650 decitex or more but not more than 1800 decitex, consisting of 110 filaments or more but not more than 120 filaments, each having a core of poly(ethylene terephthalate) and a skin of polyamide-6, containing by weight 75 % or more but not more than 77 % of poly(ethylene terephthalate), for use in the manufacture of roofings |
0 % |
31.12.2011 |
| *ex54024900 |
30 |
Yarn of a copolymer of glycollic acid with lactic acid, for the manufacture of surgical sutures |
0 % |
31.12.2013 |
| *ex54024900 |
50 |
Non-textured filament yarn of poly(vinyl alcohol) |
0 % |
31.12.2013 |
| *ex54024900 |
70 |
Synthetic filament yarn, single, containing by weight 85 % or more of acrylonitrile, in the form of a wick containing 1000 continuous filaments or more but not more than 25000 continuous filaments, of a weight per metre of 0,12 g or more but not more than 3,75 g and of a length of 100 m or more, for the manufacture of carbon-fibre yarn |
0 % |
31.12.2013 |
| *ex54041900 |
20 |
Monofilament of poly(1,4-dioxanone) |
0 % |
31.12.2013 |
| *ex54041900 |
50 |
Monofilaments of polyester or poly(butylene terephthalate), with crosssectional dimension of 0,5 mm or more but not more than 1 mm, for use in the manufacture of zippers |
0 % |
31.12.2013 |
| *ex54049090 |
20 |
Strip of polyimide |
0 % |
31.12.2013 |
| ex54071000 |
10 |
Textile fabric, consisting of warp filament yarns of polyamide-6.6 and weft filament yarns of polyamide-6.6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4’-oxybis (phenyleneamine) |
0 % |
31.12.2012 |
| *ex55031100ex56013000 |
1040 |
Synthetic staple fibres of a copolymer of terephthalic acid, p-phenylenediamine and 3,4’-oxybis(phenyleneamine), of a length of not more than 7 mm |
0 % |
31.12.2013 |
| *ex55039000ex55069000ex56013000 |
201010 |
Poly(vinyl alcohol) fibres, whether or not acetalized |
0 % |
31.12.2013 |
| *ex56031110ex56031190ex56031210ex56031290ex56039110ex56039190ex56039210ex56039290 |
1010101010101010 |
Poly(vinyl alcohol) non-wovens, in the piece or cut into rectangles:-
of a thickness of 200 μm or more but not more than 280 μm and
- of a weight of 20 g/m2 or more but not more than 50 g/m2
|
0 % |
31.12.2013 |
| ex56031110ex56031190 |
2020 |
Nonwovens, not weighing more than 20 g/m2, containing spunbonded and meltblown filaments put together in a sandwich way with the two outer layers containing fine endless filaments (not less than 10 μm but not more than 20 μm in diameter) and the inner layer containing super-fine endless filaments (not less than 1 μm but not more than 5 μm in diameter), for the manufacture of napkins and napkin liners for babies and similar sanitary napkins |
0 % |
31.12.2012 |
| *ex56031290ex56031390ex56031490ex56039290ex56039390ex56039490 |
303010604030 |
Non-wovens of aromatic polyamide fibres obtained by polycondensation of m-phenylenediamine and isophthalic acid, in the piece or cut into rectangles |
0 % |
31.12.2013 |
| ex56031290 |
50 |
Non-woven:-
weighing 30 g/m2 or more, but not more than 60 g/m2,
- containing fibres of polypropylene or of polypropylene and polyethylene,
- whether or not printed, with:
- on one side, 65 % of the total surface area having circular bobbles of 4 mm in diameter, consisting of anchored, elevated un-bonded curly fibres, suitable for the engagement of extruded hook materials, and the remaining 35 % of the surface area being bonded,
- and on other side a smooth untextured surface,
for use in the manufacture of napkins and napkin liners for babies and similar sanitary articles |
0 % |
31.12.2012 |
| *ex56031290ex56031390 |
6060 |
Non-woven of spunbonded polyethylene, of a weight of more than 60 g/m2 but not more than 80 g/m2 and an air resistance (Gurley) of 8 s or more but not more than 36 s (as determined by the ISO 5636/5 method) |
0 % |
31.12.2013 |
| *ex56031290ex56031390ex56039290ex56039390 |
70704010 |
Non-wovens of polypropylene, consisting of a meltblown layer, laminated on each side with spunbonded filaments of polypropylene, of a thickness of not more than 550 μm and of a weight of not more than 80 g/m2, in the piece or simply cut into squares or rectangles, not impregnated |
0 % |
31.12.2013 |
| *ex56031490 |
30 |
Non-wovens, consisting of a central elastomeric film laminated on each side with spunbonded filaments of polypropylene, of a weight of 200 g/m2 or more but not more than 300 g/m2 |
0 % |
31.12.2013 |
| *ex56039290ex56039390 |
2020 |
Non-wovens consisting of a meltblown central layer of a thermoplastic elastomer laminated on each side with spunbonded filaments of polypropylene |
0 % |
31.12.2013 |
| *ex56039290ex56039490 |
7040 |
Non-wovens, consisting of multiple layers of a mixture of meltblown fibres and staple fibres of polypropylene and polyester, whether or not laminated on one side or on both sides with spunbonded filaments of polypropylene, of a total thickness of not more than 50 mm |
0 % |
31.12.2013 |
| *ex56039490 |
20 |
Acrylic fibre rods, having a length of not more than 50 cm, for the manufacture of pen tips |
0 % |
31.12.2013 |
| *ex58030010 |
91 |
Gauze of cotton, of a width of less than 1500 mm |
0 % |
31.12.2013 |
| *ex59031090ex59032090ex59039099 |
101020 |
Knitted or woven fabrics, coated or covered on one side with artificial plastic material in which are embedded microspheres |
0 % |
31.12.2013 |
| *ex59069990 |
10 |
Rubberised textile fabric, consisting of warp yarns of polyamide-6.6 and weft yarns of polyamide-6.6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4’-oxybis(phenyleneamine) |
0 % |
31.12.2013 |
| *ex59070000 |
10 |
Textile fabrics, coated with adhesive in which are embedded spheres of a diameter of not more than 150 μm |
0 % |
31.12.2011 |
| *ex59111000 |
10 |
Needle-punched synthetic-fibre felts, not containing polyester, whether or not containing catalytic particles entrapped within the synthetic fibres, coated or covered on one side with polytetrafluoroethylene film, for the manufacture of filtration products |
0 % |
31.12.2013 |
| *ex59119090ex84219900 |
3092 |
Parts of equipment for the purification of water by reverse osmosis, consisting essentially of plastic-based membranes, supported internally by woven or non-woven textile materials which are wound round a perforated tube, and enclosed in a cylindrical plastic casing of a wall-thickness of not more than 4 mm, whether or not housed in a cylinder of a wall-thickness of 5 mm or more |
0 % |
31.12.2013 |
| *ex68051000ex68052000ex68053080 |
101010 |
Abrasive in the form of identically shaped particles on a support |
0 % |
31.12.2013 |
| *ex68138900 |
10 |
Friction material, of a thickness of less than 20 mm, not mounted, for the manufacture of friction components of a kind used in automatic transmissions and clutches |
0 % |
31.12.2013 |
| *ex69039090 |
20 |
Silicon carbide reactor tubes and holders, of a kind used for insertion into diffusion and oxidation furnaces for production of semiconductor materials |
0 % |
31.12.2013 |
| *ex69091900 |
30 |
Supports for catalysts, consisting of porous cordierite or mullite ceramic pieces, of an overall volume of not more than 65 l, having, per cm2 of the cross-section, not less than one continuous channel which may be open at both ends or stopped at one end |
0 % |
31.12.2013 |
| *ex69091900ex69149090 |
5020 |
Ceramic articles made of continuous filaments of ceramic oxides, containing by weight:-
2 % or more of diboron trioxide,
- 28 % or less of silicon dioxide and
- 60 % or more of dialuminium trioxide
|
0 % |
31.12.2013 |
| *ex69091900 |
60 |
Supports for catalysts, consisting of porous ceramic pieces, of a blend of silicon carbide and silicon, with a hardness of less than 9 on the Mohs scale, with a total volume of not more than 65 litres, having, per cm2 of the surface of the cross section one or more closed channels at the tail end |
0 % |
31.12.2013 |
| *ex69149090 |
30 |
Ceramic microspheres, transparent, obtained from silicon dioxide and zirconium dioxide, of a diameter of more than 125 μm |
0 % |
31.12.2013 |
| *ex70021000 |
10 |
Balls of E-glass, of a diameter of 18,5 mm or more but not more than 26 mm |
0 % |
31.12.2013 |
| *ex70051025 |
10 |
Float glass:-
of a thickness of 2,0 mm or more but not more than 2,4 mm,
- coated on one surface with a fluorine doped tin dioxide reflective layer
|
0 % |
31.12.2012 |
| ex70051030 |
10 |
Float glass:-
of a thickness of 4,0 mm or more but not more than 4,2 mm,
- with a light transmission of 91 % or more measured using a D-type light source,
- coated on one surface with a fluorine doped tin dioxide reflective layer
|
0 % |
31.12.2012 |
| *ex70060090 |
50 |
Glass plate of a diagonal size of 81 cm or more, but not more than 186 cm, provided either with a mesh film or a sputtered conductive layer for EMC shielding and a near-infrared absorbing film, with optional additional anti-reflex/colour enhancement layers on one or both sides |
0 % |
31.12.2013 |
| ex70060090ex85299092 |
6046 |
Soda-lime glass plates with:-
a strain point of more than 570 oC
- a thickness of 1,7 mm or more but not more than 2,9 mm
- dimensions of 1144 mm (±0,5 mm) × 670 mm (±0,5 mm) or 1164 mm (±0,5 mm) × 649 mm (±0,5 mm)and
- whether or not containing:
- an Indium-Tin Oxide film, or
- a grid of electrodes made from silver paste covered by dielectric material
|
0 % |
31.12.2012 |
| *ex70071920 |
10 |
Glass plate of a diagonal size of 81,28 cm (±1,5 cm) or more, but not more than 185,42 cm (±1,5 cm), consisting of tempered glass; provided either with a mesh film and a near-infrared absorbing film or a sputtered conductive layer, with optional additional anti-reflex layer on one or both sides, for use in the manufacture of products falling within heading 8 528 |
0 % |
31.12.2013 |
| ex70071920 |
20 |
Tempered or semi-tempered glass plate of a diagonal size of 81 cm or more, but not more than 186 cm, with one or more polymer layers, whether or not painted or with coloured or black ceramics around the surrounding edges, for use in the manufacture of goods falling within heading 8 528 |
0 % |
31.12.2012 |
| *ex70072900 |
10 |
Glass plate of a diagonal size of 81,28 cm (±1,5 cm) or more, but not more than 185,42 cm (±1,5 cm), consisting of 2 sandwich plates laminated together; provided either with a mesh film and a near-infrared absorbing film or a sputtered conductive layer, with optional additional anti-reflex layer on one or both sides |
0 % |
31.12.2013 |
| *ex70111000 |
10 |
Glass lenses with a stippled front refractor or with a front refractor composed of prismatic elements, with an external diameter of more than 121 mm but not more than 125 mm |
0 % |
31.12.2013 |
| *ex70112000 |
20 |
Glass cone (funnel) for cathode-ray tube with a diagonal measurement of 508,8 mm or more but not more than 811,0 mm |
0 % |
31.12.2011 |
| ex70112000 |
50 |
Glass face plate with-
a light transmission of 52,5 % (± 5 %) at a glass thickness of 11,43 mm and
- a diagonal measurement of 512,1 mm or more but not more than 814,2 mm and
- dimensions of 341,8 × 440,5 × 94,1 mm (±1,4 mm) or 359,4 × 454,8 × 80,0 mm (±1,4 mm) or 358,0 × 454,0 × 90,0 (±1,4 mm) or 359,4 × 454,8 × 72,0 (±1,4 mm) or 396,0 × 633,0 × 103,7 mm (±1,4 mm) or 472,7 × 600,8 × 97,6 mm (±1,4 mm) or 472,7 × 600,8 × 84,5 mm (±1,4 mm) or 445,0 × 726,1 × 112,5 mm (±1,4 mm) or 445,0 × 726,1 × 93,0 mm (±1,4 mm)
|
0 % |
31.12.2011 |
| *ex70140000 |
10 |
Optical elements of glass (other than those of heading No 7015), not optically worked, other than signalling glassware |
0 % |
31.12.2013 |
| *ex70191200 |
10 |
Rovings, measuring 2600 tex or more but not more than 3300 tex and of a loss on ignition of 4 % or more but not more than 8 % by weight (as determined by the ASTM D 2584-94 method) |
0 % |
31.12.2013 |
| *ex70191200 |
15 |
Rovings, measuring 650 tex or more but not more than 2500 tex, coated with a layer of polyurethane whether or not mixed with other materials |
0 % |
31.12.2013 |
| *ex70191200 |
50 |
Rovings, measuring 392 tex or more but not more than 2884 tex, coated with a layer of an acrylic copolymer |
0 % |
31.12.2013 |
| *ex70191200 |
70 |
Rovings, measuring 417 tex or more but not more than 3180 tex, coated with a layer of poly(sodium acrylate) and poly(acrylic acid) |
0 % |
31.12.2013 |
| *ex70191910 |
10 |
Yarn of 33 tex or a multiple thereof (±7,5 %), obtained from continuous spun-glass filaments of a nominal diameter of 3,5 μm or of 4,5 μm, in which filaments of a diameter of 3 μm or more but not more than 5,2 μm predominate, other than those treated so as to improve their adhesion to elastomers |
0 % |
31.12.2013 |
| *ex70191910 |
50 |
Yarn of E-glass of 68 or 74 tex (± 7 %), obtained from continuous spun-glass filaments of a nominal diameter of 9 μm, in which filaments of a diameter of 8,1 μm or more but not more than 9,9 μm predominate, for the manufacture of woven fabrics for electrical laminates (prepregs) |
0 % |
31.12.2013 |
| *ex70191910ex70199099 |
6030 |
High modulus glass cord (K) impregnated with rubber, obtained from twisted high modulus glass filament yarns, coated with a latex comprising a resorcinol-formaldehyde resin with or without vinylpyridine and/or hydrogenated acrylonitrile-butadiene rubber (HNBR) |
0 % |
31.12.2013 |
| *ex70191910ex70199099 |
7020 |
Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde-vinylpyridine resin and an acrylonitrile-butadiene rubber (NBR) |
0 % |
31.12.2013 |
| *ex70191910ex70199099 |
8010 |
Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde resin and chlorosulphonated polyethylene |
0 % |
31.12.2013 |
| ex70193900 |
50 |
Non-woven product of non-textile glass fibre, for the manufacture of air filters |
0 % |
31.12.2011 |
| *ex70194000 |
10 |
Woven fabrics of rovings, impregnated with epoxy resin, with a coefficient of thermal expansion between 30 oC and 120 oC (measured according to IPC-TM-650) of-
10 ppm per oC or more, but not more than 12 ppm per oC in the length and width and
- 20 ppm per oC or more, but not more than 30 ppm per oC in the thickness, with a glass transition temperature of 152 oC or more, but not more than 153 oC (measured according IPC-TM-650)
|
0 % |
31.12.2013 |
| *ex70199010 |
10 |
Non-textile glass fibres in which fibres of a diameter of less than 4,6 μm predominate |
0 % |
31.12.2013 |
| ex72011011 |
10 |
Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm |
0 % |
31.12.2011 |
| ex72011030 |
10 |
Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm, containing by weight not more than 1 % of silicon |
0 % |
31.12.2011 |
| *72025000 |
|
Ferro-silico-chromium |
0 % |
31.12.2013 |
| ex73262080 |
20 |
Metal fleece, consisting of a mass of stainless steel wires of diameters ranging from 0,022 mm to 0,070 mm, compacted by sintering and rolling |
0 % |
31.12.2011 |
| *ex74091900ex74102100 |
2050 |
Plates-
consisting of at least one layer of fibreglass fabric impregnated with epoxide resin,
- covered on one or both sides with copper foil and
- with a dielectric constant (DK) of less than 3,9 and a loss factor (Df) of less than 0,015 at a measuring frequency of 10 GHz, as measured according to IPC-TM-650
|
0 % |
30.6.2009 |
| *ex74101100ex74102100 |
1060 |
Copper foil of a thickness of not more than 0,15 mm, coated with resin, free of halogen, with-
a decomposition temperature of 350 oC or more (measured according to ASTM D 3850) and
- a time to delamination at 260 oC of more than 40 minutes and at 288 oC of more than 5 minutes (measured according to IPC-TM-650)
|
0 % |
30.6.2009 |
| *ex74102100 |
10 |
Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with copper foil |
0 % |
31.12.2013 |
| *ex74102100 |
30 |
Film of polyimide, not containing epoxide resin and/or glass fibre, covered on one side or on both sides with a copper foil |
0 % |
31.12.2013 |
| *ex74102100 |
40 |
Sheet or plates-
consisting of a central layer of paper, laminated on each side with glass-fibre fabric and impregnated with epoxide resin, or
- consisting of multiple layers of paper, impregnated with phenolic resin,
coated on one or both sides with a copper film with a maximum thickness of 0,15 mm |
0 % |
31.12.2013 |
| *ex74102100 |
70 |
Sheets and plates consisting of a layer of glass-fibre fabric impregnated with epoxide resin, coated on one or both sides with a copper film with a thickness of not more than 0,15 mm, with-
a decomposition temperature of 350 oC or more (measured according ASTM D 3850) and
- a time to delamination at 288 oC of more than 50 minutes (measured according IPC-TM-650)
|
0 % |
30.6.2009 |
| *ex74199990ex76169990 |
9160 |
Disc (target) with deposition material, consisting of molybdenum silicide:-
containing 1 mg/kg or less of sodium and
- mounted on a copper or aluminium support
|
0 % |
31.12.2013 |
| ex76012099 |
10 |
Sheets and billets of secondary aluminium alloy containing lithium |
0 % |
31.12.2012 |
| *ex76051900 |
10 |
Not alloyed aluminium wire, of a diameter of 2 mm or more but not more than 6 mm, covered with a layer of copper of a thickness of 0,032 mm or more but not more than 0,117 mm |
0 % |
31.12.2013 |
| ex76061210ex76071190 |
1020 |
Strip of an alloy of aluminium and magnesium, containing by weight:-
93,3 % or more of aluminium,
- 2,2 % or more but not more than 5 % of magnesium, and
- not more than 1,8 % of other elements,in rolls, of a thickness of 0,14 mm or more but not more than 0,40 mm and a width of 12,5 mm or more but not more than 89 mm, with a tensile strength of 285 N/mm2 or more and an elongation at break of 1,0 % or more
|
0 % |
31.12.2012 |
| *ex76061291ex76061293 |
2020 |
Plates, sheets and strip of aluminium alloys, of a thickness of 1 mm or more but not more than 3 mm, with:-
a layer of epoxy resin with imbedded inorganic material and
- a copper foil with a thickness of 35 μm or more but not more than 105 μm
|
0 % |
30.6.2009 |
| ex76071190 |
10 |
Plain aluminium foil with the following parameters:-
an aluminium content of 99,98 % or more
- a thickness of 0,070 mm or more but not more than 0,115 mm
- with a cubic texture
of a kind used for high voltage etching |
0 % |
31.12.2011 |
| ex76072099 |
10 |
Aluminium laminated film of a total thickness of not more than 0,123 mm, comprising of a layer of aluminium of a thickness of not more than 0,040 mm, polyamide and polypropylene base films, and a protective coating against corrosion by hydrofluoric acid, for use in the manufacture of lithium polymer batteries |
0 % |
31.12.2012 |
| *ex76130000 |
20 |
Aluminium container, seamless, for compressed natural gas or compressed hydrogen, wholly embedded in an overwrap of epoxy-carbon fibres composite, of a storage capacity of 172 l (± 10 %) and an unfilled weight of not more than 64 kg |
0 % |
31.12.2013 |
| *ex76169990 |
15 |
Honeycomb aluminium blocks of the type used in the manufacture of aircraft parts |
0 % |
31.12.2013 |
| *81041100 |
|
Unwrought magnesium, containing at least 99,8 % by weight of magnesium |
0 % |
31.12.2013 |
| *ex81049000 |
10 |
Ground and polished magnesium sheets, of dimensions not more than 1500 × 2000 mm, coated on one side with an epoxy resin insensitive to light |
0 % |
31.12.2013 |
| *ex81082000 |
10 |
Titanium sponge |
0 % |
31.12.2013 |
| *ex81082000 |
20 |
Titanium alloy ingots |
0 % |
31.12.2013 |
| *ex81083000 |
10 |
Waste and scrap of titanium and titanium alloys, except those containing by weight 1 % or more but not more than 2 % of aluminium |
0 % |
31.12.2013 |
| ex81089030 |
10 |
Titanium alloy rods complying with standard EN 2002-1 or EN 4267 |
0 % |
31.12.2012 |
| ex81089030 |
20 |
Bars, rods and wire of alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, for use in the manufacture of silencers and exhaust pipes of subheadings 870892 or 871419 |
0 % |
31.12.2012 |
| *ex81089050 |
10 |
Alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, in sheets or rolls, of a thickness of 0,49 mm or more but not more than 3,1 mm, of a width of 1000 mm or more but not more than 1254 mm, for the manufacture of goods of subheading 87141900 |
0 % |
31.12.2013 |
| *ex81089050 |
20 |
Alloy of titanium, aluminium and vanadium, containing by weight 2,5 % or more but not more than 3,5 % of aluminium and 2,0 % or more but not more than 3,0 % of vanadium, in sheets or rolls, of a thickness of 0,6 mm or more but not more than 0,9 mm, of a width of not more than 1000 mm, for the manufacture of goods of subheading 87141900 |
0 % |
31.12.2013 |
| *ex81089050 |
30 |
Alloy of titanium and silicon, containing by weight 0,15 % or more but not more than 0,60 % of silicon, in sheets or rolls, for use in the manufacture of:-
exhaust systems for internal combustion engines or
- tubes and pipes of subheading 81089060
|
0 % |
31.12.2012 |
| ex81089050 |
40 |
Titanium-alloy sheets for the manufacture of structural parts of aircrafts |
0 % |
31.12.2012 |
| ex81089050 |
50 |
Plates, sheets, strips and foils of an alloy of titanium, copper and niobium, containing by weight 0,8 % or more but not more than 1,2 % of copper and 0,4 % or more but not more than 0,6 % of niobium |
0 % |
31.12.2012 |
| *ex81089050 |
60 |
Plates, sheets, strips and foils of an alloy of titanium, aluminium, silicon and niobium, containing by weight:-
0,4 % or more but not more than 0,6 % of aluminium,
- 0,35 % or more but not more than 0,55 % of silicon and
- 0,1 % or more but not more than 0,3 % of niobium
|
0 % |
31.12.2013 |
| *ex81092000 |
10 |
Non-alloy zirconium, in the form of ingots, containing by weight more than 0,01 % of hafnium, for use in the manufacture of tubes for the chemical industry |
0 % |
31.12.2013 |
| *ex81101000 |
10 |
Antimony in the form of ingots |
0 % |
31.12.2013 |
| *ex81129930 |
10 |
Alloy of niobium (columbium) and titanium, in the form of bars and rods |
0 % |
31.12.2013 |
| *ex81130090 |
10 |
Carrier plate of aluminium silicon carbide (AlSiC-9) for electronic circuits |
0 % |
31.12.2012 |
| *ex83052000 |
10 |
Staples of a width of 12 mm (± 1 mm) and a depth of 8 mm (± 1 mm) for use in copiers and printers |
0 % |
31.12.2013 |
| *ex83099090 |
10 |
Aluminium can ends with so-called "ring pull" full aperture with a diameter of 136,5 mm (± 1 mm) |
0 % |
31.12.2013 |
| *ex84013000 |
20 |
Non-irradiated hexagonal fuel modules (elements) for use in nuclear reactors |
0 % |
31.12.2013 |
| *ex84073100 |
10 |
Two stroke internal combustion engine, of a cylinder capacity of not more than 30 cm3 for use in the manufacture of portable motorised scooters falling within subheading 87111000 |
0 % |
31.12.2012 |
| ex84073390ex84079080ex84079090 |
101010 |
Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cm3 and a power of not less than 6 kW but not exceeding 20,0 kW, for the manufacture of:-
self-propelled lawn mowers, with a seat of sub-heading 84331151
- tractors of subheading 87019011, whose main function is that of a lawn mower
- four stroke mowers with motor of a cylinder capacity of not less than 300 cc of subheading 84332010 or
- snowploughs and snow blowers of subheading 843020
|
0 % |
31.12.2012 |
| *ex84079010 |
10 |
Four-stroke petrol engines of a cylinder capacity of not more than 250 cm3 for use in the manufacture of lawnmowers of sub-heading 843311, mowers with motor of subheading 84332010, rotovators of sub-heading 84322950, garden shredders of sub-heading 84368090 or scarifiers of subheading 84322910 |
0 % |
31.12.2011 |
| *ex84079010 |
20 |
Two-stroke internal combustion engines, having a cylinder capacity of not more than 125 cm3, for the manufacture of lawnmowers of sub-heading 843311 or snowploughs and snow blowers of subheading 843020 |
0 % |
31.12.2013 |
| *ex84089041 |
20 |
Diesel engines of a power of not more than 15 kW, with 2 or 3 cylinders, for use in the manufacture of vehicle mounted temperature control systems |
0 % |
31.12.2013 |
| *ex84089043 |
20 |
Diesel engines of a power of not more than 30 kW, with 4 cylinders, for use in the manufacture of vehicle mounted temperature control systems |
0 % |
31.12.2013 |
| ex84139100 |
20 |
Manganese-silicon-bronze swash plates with a copper content of 58 % or more but not more than 63 % by weight for incorporation into fluid pumps for air conditioners of motor vehicles |
0 % |
31.12.2011 |
| *ex84143089 |
20 |
Vehicle air conditioning system part, consisting of an open shaft reciprocating compressor of a power of more than 0,4 kW but not more than 10 kW |
0 % |
31.12.2013 |
| *ex84145920 |
30 |
Axial fan:-
with an electric motor,
- of an output of not more than 125 W
for use in the manufacture of computers |
0 % |
31.12.2013 |
| *ex84149000 |
20 |
Aluminium pistons, partially covered with polytetrafluoroethylene, for incorporation into compressors of air conditioning machines of motor vehicles |
0 % |
31.12.2013 |
| *ex84149000 |
30 |
Pressure-regulating system, for incorporation into compressors of air conditioning machines of motor vehicles |
0 % |
31.12.2013 |
| *ex84149000 |
40 |
Drive part, for compressors of air conditioning machines of motor vehicles |
0 % |
31.12.2013 |
| ex84149000 |
50 |
Cross-flow fan, of 97,4 mm (±0,2 mm) diameter and 645 mm (± 1 mm) or 873 mm (+0,5/-1 mm) height made from anti-static, anti-bacterial and heat-resistant, glass fiber reinforced plastic with a minimum temperature resistance of 70 oC, for use in the manufacture of indoor air conditioning units |
0 % |
31.12.2011 |
| ex84159000 |
20 |
Evaporator made of aluminium for use in the manufacture of air conditioning machines for automobiles |
0 % |
31.12.2011 |
| ex84198998 |
30 |
Apparatus for vapour deposition of parylene for use in the manufacture of drug eluting stents |
0 % |
31.12.2012 |
| ex84198998 |
40 |
Solution preparation apparatus for the treatment of materials by a process involving a change of temperature for use in the manufacture of drug-eluting stents |
0 % |
31.12.2012 |
| *ex84219900 |
91 |
Parts of equipment, for the purification of water by reverse osmosis, consisting of a bundle of hollow fibres of artificial plastic material with permeable walls, embedded in a block of artificial plastic material at one end and passing through a block of artificial plastic material at the other end, whether or not housed in a cylinder |
0 % |
31.12.2013 |
| *ex84219900 |
93 |
Components of separators for the separation or purification of gases from gas mixtures, consisting of a bundle of permeable hollow fibres enclosed within a container, whether or not perforated, of an overall length of 300 mm or more but not more than 3700 mm and a diameter of not more than 500 mm |
0 % |
31.12.2013 |
| *ex84223000ex84798997 |
1030 |
Machines and apparatus, other than injection moulding machines, for the manufacture of ink-jet printer cartridges |
0 % |
31.12.2013 |
| *ex84399910ex84399990 |
1010 |
Suction-roll shells, produced by centrifugal casting, not drilled, in the form of alloy-steel tubes, of a length of 3000 mm or more and an external diameter of 550 mm or more |
0 % |
31.12.2013 |
| ex84622180 |
10 |
Numerically controlled stent crimping machine comprising a base, a pneumatic crimp head and a motorised product positioning mechanism (V-block) to crimp a stent onto the balloon of a catheter using radial pressure in the manufacture of drug eluting stents |
0 % |
31.12.2012 |
| *ex84775980 |
10 |
Machinery for working rubber or plastic for use in the manufacture of drug-eluting stents |
0 % |
31.12.2012 |
| *ex84778099 |
10 |
Machines for casting or for surface modification of plastic membranes of heading No 3921 |
0 % |
31.12.2013 |
| *ex84818059 |
10 |
Air control valve, consisting of a stepping motor and a valve pintle, for the regulation of idle air flow in fuel injection engines |
0 % |
31.12.2013 |
| *ex84818079 |
20 |
Solenoid valve device that can withstand a pressure of 875 bar |
0 % |
31.12.2013 |
| ex84818099 |
50 |
Service valve, consisting a combination of a two way valve on the liquid line and a three way valve on the gas line with:-
a minimum enclosing pressure of 30 kgf/cm2,
- a minimum withstanding pressure of 45 kgf/cm2,
for use in the manufacture of outdoor air conditioning units |
0 % |
31.12.2011 |
| ex84818099 |
60 |
Four way valve, consisting of:-
a core plunger,
- a sealing plunger,
- a 220 V-240 V AC 50/60 Hz solenoid coil,
- a working pressure up to 4.3 Mpa,
- a housing
for directing the flow of the refrigerant, for use in the manufacture of outdoor air conditioning units |
0 % |
31.12.2011 |
| *ex84834051 |
20 |
Gear box, having a differential with wheel axle, for use in the manufacture of self-propelled lawnmowers with a seat of subheading 84331151 |
0 % |
31.12.2013 |
| *ex84834059 |
20 |
Hydrostatic speed changer, having a hydro pump and a differential with wheel axle, for use in the manufacture of self-propelled lawnmowers with a seat of subheading 84331151 |
0 % |
31.12.2013 |
| ex85011093 |
20 |
Single phased 50 Hz, AC motor driven by permanent single capacitor and having a power output of less than 37 W, for use in the manufacture of indoor split air conditioning units |
0 % |
31.12.2011 |
| *ex85011099 |
54 |
DC motor, brushless, with an external diameter of not more than 25,4 mm, a rated speed of 2260 (± 15 %) or 5420 (± 15 %) rpm, a supply voltage of 1,5 V or 3 V |
0 % |
31.12.2013 |
| *ex85011099 |
79 |
DC motor with brushes and an internal rotor with a three-phase winding, of a specified temperature range covering at least - 20 oC to + 70 oC |
0 % |
31.12.2013 |
| *ex85011099 |
81 |
DC stepping motor, with an angle of step of 18 o or more, a holding torque of 0,5 mNm or more, a coupling bracket the exterior dimensions of which do not exceed 22 × 68 mm, a two phase winding and an output of not more than 5 W |
0 % |
31.12.2013 |
| *ex85011099 |
82 |
DC motor, brushless, with an external diameter of not more than 29 mm, a rated speed of 1500 (± 15 %) or 6800 (± 15 %) rpm, a supply voltage of 2 V or 8 V |
0 % |
31.12.2013 |
| *ex85013100 |
30 |
DC motor, brushless, with a three-phase winding, an external diameter of 85 mm or more, but not more than 115 mm, a nominal torque of 2.23 Nm (±1,0 Nm), of an output of more than 120 W but not more than 520 W, calculated with 1550 RPM (± 350 RPM) at a supply voltage of 12 V equipped with electronic circuit with sensors using the Hall effect, for use with an electric power steering control module (power steering motor) |
0 % |
31.12.2011 |
| *ex85030091ex85030099 |
3132 |
Rotor, at the innerside provided with one or two magnetic rings whether or not incorporated in a steel ring |
0 % |
31.12.2013 |
| *ex85030099 |
31 |
Stamped collector of an electric motor, having an external diameter of not more than 16 mm |
0 % |
31.12.2013 |
| *ex85043180 |
20 |
Transformer for use in the manufacture of inverters in LCD modules |
0 % |
31.12.2012 |
| *ex85043180 |
30 |
Switching transformers, having a power handling capacity of not more than 1 kVA for use in the manufacture of static converters |
0 % |
31.12.2013 |
| *ex85044090 |
20 |
Direct current to direct current converter |
0 % |
31.12.2013 |
| *ex85044090 |
30 |
Static converter comprising a power switch with insulated-gate bipolar transistors (IGBTs), contained in a housing, for use in the manufacture of microwave ovens of subheading 85165000 |
0 % |
31.12.2013 |
| *ex85045095 |
20 |
Inductor with an inductance of not more than 62 mH |
0 % |
31.12.2013 |
| *ex85045095 |
30 |
Multilayer monolithic inductors, contained in a housing of the SMD (surface mounted device) type the exterior dimensions of which do not exceed 1,8 × 3,4 mm, for use in the manufacture of products falling within subheading 85171100, 85171200 or 85176931 |
0 % |
31.12.2013 |
| *ex85049011 |
10 |
Ferrite cores, other than for deflection yokes |
0 % |
31.12.2013 |
| ex85049018 |
40 |
Trans coil for boosting DC voltage and isolating high and low voltages for use in the manufacture of products falling within subheading 85043180 |
0 % |
31.12.2011 |
| *ex85051100 |
31 |
Ferrite magnet having a remanence of 455 mT (± 15 mT) |
0 % |
31.12.2013 |
| *ex85051100 |
33 |
Magnets consisting of an alloy of neodymium, iron and boron, either in the shape of a rounded rectangle with measurements of not more than 15 × 10 × 2 mm, or in the shape of a disc with a diameter of not more than 90 mm, whether or not containing a hole in the centre |
0 % |
31.12.2013 |
| *ex85051990 |
31 |
Neodymium-ferro ring with an external diameter of not more than 13 mm, an internal diameter of not more than 9 mm |
0 % |
31.12.2013 |
| *ex85052000 |
30 |
Electromagnetic clutch, for use in the manufacture of compressors of air conditioning machines of motor vehicles |
0 % |
31.12.2013 |
| *ex85059010 |
91 |
Solenoid with a plunger, operating at a nominal supply voltage of 24 V at a nominal DC of 0,08 A, for use in the manufacture of products falling within heading No 8517 |
0 % |
31.12.2013 |
| *ex85065090 |
10 |
Lithium iodine single cell battery the dimensions of which do not exceed 9 × 23 × 45 mm and a voltage of not more than 2,8 V |
0 % |
31.12.2013 |
| *ex85065090 |
20 |
Unit consisting of not more than 2 lithium batteries embedded in a socket for integrated circuits (battery-buffered socket), with not more than 32 connections and incorporating a control circuit |
0 % |
31.12.2013 |
| *ex85065090 |
30 |
Lithium-iodine or lithium-silver vanadium oxide single cell battery of dimensions of not more than 28 × 45 × 15 mm and a capacity of not less than 1,05 Ah |
0 % |
31.12.2013 |
| *ex85073020 |
30 |
Cylindrical nickel-cadmium accumulator, with a length of 65,3 mm (±1,5 mm) and a diameter of 14,5 mm (± 1 mm), having a nominal capacity of 1000 mAh or more, for use in the manufacture of rechargeable batteries |
0 % |
31.12.2013 |
| *ex85078020ex85078030 |
2020 |
Rectangular accumulator, with a length of not more than 69 mm, a width of not more than 36 mm and a thickness of not more than 12 mm, for use in the manufacture of rechargeable batteries |
0 % |
31.12.2013 |
| *ex85078020 |
30 |
Cylindrical nickel-hydride accumulator, of a diameter of not more than 14,5 mm, for the manufacture of rechargeable batteries |
0 % |
31.12.2013 |
| *ex85078030 |
30 |
Cylindrical lithium-ion accumulator, with a length of 64,6 mm or more and a diameter of 18,1 mm or more, having a nominal capacity of 1200 mAh or more, for use in the manufacture of rechargeable batteries |
0 % |
31.12.2013 |
| *ex85078030 |
40 |
Rectangular lithium-ion-accumulator, with-
a length of 80 mm or more, but not more than 1000 mm,
- a width of 25 mm or more, but not more than 150 mm,
- a height of 100 mm or more, but not more than 500 mm,
- a weight of 0,5 kg or more, but not more than 30 kg,
- a capacity of 20 Ah or more, but not more than 1000 Ah,
for use in the manufacture of rechargeable power-supply units for incorporation into goods of heading No 8903 |
0 % |
31.12.2011 |
| *ex85078030 |
50 |
Lithium-ion-accumulator, with a distance between the poles of 55 mm or more, for use in the manufacture of rechargeable power-supply units for incorporation in electric motorcycles of subheading No 871190 |
0 % |
31.12.2012 |
| *ex85183095 |
20 |
Headphone and earphone for hearing aids, contained in a housing the exterior dimensions of which, excluding connecting points, do not exceed 5 × 6 × 8 mm |
0 % |
31.12.2013 |
| *ex85189000 |
91 |
Integrally cold-upsetted steel coreplate, in the form of a disk on one side provided with a cylinder, for use in the manufacture of loudspeakers |
0 % |
31.12.2013 |
| ex85198135 |
10 |
Unmounted assembly, comprising at least one optical unit and DC motors and operational control circuit, with digital/analogue converter, for use in the manufacture of CD players |
0 % |
31.12.2012 |
| *ex85229049 |
50 |
Electronic assembly for a laser read-head of a compact disc player, comprising:-
a printed circuit,
- a photo-detector, in the form of a monolithic integrated circuit, contained in a housing,
- not more than 3 connectors,
- not more than 1 transistor,
- not more than 3 variable and 4 fixed resistors,
- not more than 5 capacitors,
the whole mounted on a support |
0 % |
31.12.2013 |
| *ex85229049 |
70 |
Assembly, comprising at least a flexible printed circuit, a laser driver integrated circuit and a signal converter integrated circuit |
0 % |
31.12.2013 |
| *ex85229080 |
65 |
Assembly for optical discs, comprising at least an optical unit and DC motors, whether or not capable of double layer recording |
0 % |
31.12.2013 |
| *ex85229080 |
70 |
Video tape recording/reproducing assembly comprising at least a motor and a printed circuit board containing integrated circuits with driver or control functions, whether or not incorporating a transformer, for use in the manufacture of products falling within heading No 8521 |
0 % |
31.12.2013 |
| *ex85229080 |
75 |
Optical reading head for CD player, consisting of one laser diode, one photodetector integrated circuit and one beam splitter |
0 % |
31.12.2013 |
| *ex85229080 |
80 |
Laser optical drive unit assembly (so called mecha units) for the recording and/or reproduction of digital video and/or audio signals, comprising at least a laser optical reading and/or writing unit, one or more DC motors and not containing a printed circuit board or containing a printed circuit board not capable of signal processing for sounds and images, for use in the manufacture of products falling within headings No 8519, 8521, 8526, 8527, 8528 or 8543 |
0 % |
31.12.2013 |
| *ex85229080 |
81 |
Laser optical pick up unit for the reproduction of optical signals from CD or DVD and the recording of optical signal on DVD, comprising at least-
a laser diode,
- a laser driver integrated circuit,
- a photo detector integrated circuit,
- a front monitor integrated circuit and an actuator,
for use in the manufacture of products falling within heading No 8521 |
0 % |
31.12.2011 |
| *ex85229080 |
83 |
Blu-ray pick up unit for the reproduction/recording of optical signals from/to DVD discs and the reproduction of optical signals from CD and Blu-ray disc comprising at least:-
3 kinds of wavelength laser diodes,
- laser driver integrated circuit,
- photo detector integrated circuit
- front monitor integrated circuit and an actuator,
for use in the manufacture of products falling within heading No 8521 |
0 % |
31.12.2013 |
| *ex85229080 |
84 |
Blu-ray drive mechanism or unit, whether or not recordable, for the reproduction or recording of optical signals from or to Blu-ray and DVD disks and the reproduction of optical signals from CD disks, comprising at least:-
an optical pick up unit with three kinds of laser,
- spindle motor,
- stepping motor,
- with or without printed circuit board mounted drive control integrated circuit,
- motor driver integrated circuit,
- memory,
for use in the manufacture of products falling within heading No 8521 |
0 % |
31.12.2013 |
| *ex85229080 |
85 |
Video head drum, with video heads or with video and audio heads and an electric motor, for use in the manufacture of products falling within heading No 8521 |
0 % |
31.12.2013 |
| *ex85229080 |
95 |
Drive-unit capable of magnetooptical signal recording and optical signal reproduction, comprising at least an optical unit, DC motors and a printed circuit on which are mounted integrated circuits providing drive and signal processing functions for reading optical discs having an external diameter of not more than 70 mm, not comprising circuits with amplification functions or power supply drive functions |
0 % |
31.12.2013 |
| ex85229080 |
96 |
Hard disk drive, for incorporation in products of heading 8521 |
0 % |
31.12.2012 |
| *ex85229080ex85299065 |
9750 |
Tuner transforming high-frequency signals into mid-frequency signals, for use in the manufacture of products falling under No 8521 and No 8528 |
0 % |
31.12.2011 |
| *ex85258019 |
20 |
Assembly for television cameras of dimensions of not more than 10 × 15 × 18 mm, comprising an image sensor, an objective and a color processor, having an image resolution of not more than 1024 × 1280 pixel, whether or not fitted with cable and/or housing, for the manufacture of goods of subheading 85171200 |
0 % |
31.12.2013 |
| *ex85258019 |
30 |
Compact chassis-type closed circuit television (CCTV) cameras, of a weight of not more than 250 g, contained in a housing of dimensions of not more than 50 × 60 × 89,5 mm, with a single sensor Charge-Couple Device (CCD), with effective pixels of not more than 440000, for use in CCTV surveillance systems |
0 % |
31.12.2013 |
| ex85258019 |
40 |
Assembly for cameras used in computer notebooks of dimensions of not more than 15 × 25 × 25 mm, comprising an image sensor, an objective and a colour processor, having an image resolution of not more than 1600 × 1200 pixel, whether or not fitted with cable and/or housing, whether or not mounted on a base and containing a LED chip |
0 % |
31.12.2011 |
| *ex85284910 |
10 |
Video monitor comprising:-
a flat screen monochrome cathode-ray tube with a diagonal measurement of the screen of not more than 110 mm and equipped with a deflector yoke, and
- a printed circuit on which are mounted a deflection unit, a video-amplifier and a transformer,
the whole mounted or not on a chassis, for the manufacture of video entry-phones, video telephones or surveillance apparatus |
0 % |
31.12.2013 |
| *ex85285990 |
20 |
Liquid cristal display colour video monitor having a DC input voltage of 7 V or more but not more than 30 V, with a diagonal measurement of the screen of 33,2 cm or less, suitable for the incorporation into goods of chapters 84 to 90 and 94 |
0 % |
31.12.2013 |
| *ex85291080 |
20 |
Ceramic filter package comprising 2 ceramic filters and 1 ceramic resonator for a frequency of 10,7 MHz (± 30 kHz), contained in a housing |
0 % |
31.12.2013 |
| *ex85291080 |
35 |
Ceramic filter for a centre frequency of 450 kHz or more but not more than 470 kHz, with a bandwidth of not more than 13 kHz at 3 dB, contained in a housing |
0 % |
31.12.2013 |
| *ex85291080 |
50 |
Ceramic filter for a centre frequency of 450 kHz (±1,5 kHz) or 455 kHz (±1,5 kHz), with a bandwidth of not more than 30 kHz at 6 dB and not more than 70 kHz at 40 dB, contained in a housing |
0 % |
31.12.2013 |
| *ex85291080 |
60 |
Filters, excluding surface acoustic wave filters, for a center frequency of 485 MHz or more but not more than 1990 MHz with an insertion loss of not more than 3,5 dB, contained in a housing |
0 % |
31.12.2013 |
| *ex85299065ex85489090 |
3044 |
Parts of TV-apparatus, having micro-processor and video-processor functions, comprising at least a micro-controller and a video-processor, mounted on a leadframe and contained in a plastic housing |
0 % |
31.12.2013 |
| ex85299065 |
60 |
Tuner transforming high frequency signals to mid frequency signals for use in the manufacture of sattelite or terrestrial TV receivers for set-top boxes |
0 % |
31.12.2011 |
| *ex85299065 |
70 |
Unit driver consisting of an electronic integrated circuit and a flexible printed circuit, for use in the manufacture of LCD modules |
0 % |
31.12.2011 |
| *ex85299065 |
75 |
Modules for driving addressing pixels, comprising at least semiconductor chips |
0 % |
31.12.2012 |
| *ex85299065 |
80 |
Scan driver boards for generating electric pulses for scanning to certain electrodes in a glass panel, comprising at least semiconductor chips |
0 % |
31.12.2012 |
| *ex85299092 |
32 |
Optical unit for video projection, comprising a colour separation system, a positioning mechanism and lenses, for use in the manufacture of products falling within heading No 8528 |
0 % |
31.12.2013 |
| *ex85299092 |
40 |
Assembly comprising prisms, digital micromirror device (DMD) chips and electronic control circuits, for the manufacture of television projection equipments or video projectors |
0 % |
31.12.2013 |
| *ex85299092 |
41 |
Digital micromirror device (DMD)-chips, for use in the manufacture of video projectors |
0 % |
31.12.2013 |
| *ex85299092 |
42 |
Heat sinks and cooling fins of aluminium, for maintaining the operating temperature of transistors and integrated circuits in television sets |
0 % |
31.12.2013 |
| *ex85299092 |
43 |
Plasma display module incorporating only address and display electrodes, with or without driver and/or control electronics for pixel address only and with or without a power supply |
0 % |
31.12.2013 |
| *ex85299092 |
44 |
LCD modules, solely consisting of one or more TFT glass or plastic cells, not combined with touch screen facilities, with or without backlight unit, with or without inverters and one or more printed circuit boards with control electronics for pixel addressing |
0 % |
31.12.2013 |
| *ex85299092 |
45 |
Integrated circuit package with TV reception functionality containing a channel decoder die, tuner die, power management die, GSM filters and discrete as well as embedded passive circuit elements for reception of digitally broadcasting videosignals of DVB-T and DVB-H formats |
0 % |
31.12.2013 |
| *ex85299097 |
60 |
Frame for use in the manufacture of high frequency tuners |
0 % |
31.12.2013 |
| *ex85318095 |
40 |
Electro-accoustic transducer |
0 % |
31.12.2013 |
| *ex85359000 |
20 |
Printed circuit board in the form of plates consisting of isolating material with electrical connections and solder points, for use in the manufacture of back light units for LCD modules |
0 % |
31.12.2013 |
| *ex85363030 |
11 |
Thermo-electric switch with a cut-off current of 50 A or more, comprising a snap action switch, for direct mounting on an electric motor coil, contained in a hermetically sealed housing |
0 % |
31.12.2013 |
| *ex85364900 |
91 |
Thermal relays contained in a hermetically sealed glass cartridge of not more than 35 mm in length excluding wires, with a maximum leakage rate of 10-6 cm3 He/sec at one bar in the temperature range 0 to 160 oC, to be incorporated into compressors for refrigerating equipment |
0 % |
31.12.2013 |
| *ex85365011 |
31 |
Switch of the printed circuit mount type, operating at a force of 4,9 N (±0,9 N), contained in a housing |
0 % |
31.12.2013 |
| *ex85365011 |
32 |
Mechanical tact switch for connecting electronic circuits, operating at a voltage of not more than 60 V and at a current strength of not more than 50 mA, for use in the manufacture of television sets |
0 % |
31.12.2013 |
| *ex85365019 |
91 |
Hall effect switch, comprising 1 magnet, 1 Hall effect sensor and 2 capacitors, contained in a housing with 3 connections |
0 % |
31.12.2013 |
| *ex85365019ex85365080 |
9397 |
Devices, having adjustable controller and switching functions, comprising one ore more monolithic integrated circuits whether or not combined with semiconductor elements, mounted together on a leadframe and contained in a plastic housing |
0 % |
31.12.2013 |
| *ex85365080 |
93 |
Switch unit for coaxial cable, comprising 3 electromagnetic switches, with a switching time of not more than 50 ms and an actuating current of not more than 500 mA at a voltage of 12 V |
0 % |
31.12.2013 |
| *ex85365080 |
95 |
Reed switch having a switching power of 20 W or more within the range of 17-43 A.turn, in the form of a glass capsule, not containing mercury, the dimensions of which do not exceed 3 × 21 mm, for use in the manufacture of automotive airbag shock-sensors |
0 % |
31.12.2013 |
| *ex85365080 |
98 |
Mechanical push-button switch for connecting electronic circuits, operating at a voltage of 220 V or more but not more than 250 V and at a current strength of not more than 5 A, for use in the manufacture of television sets |
0 % |
31.12.2013 |
| ex85366990 |
20 |
Pitch connector for use in the manufacture of LCD television reception apparatus |
0 % |
31.12.2012 |
| *ex85369085 |
92 |
Metallic stamped frame with connections |
0 % |
31.12.2013 |
| *ex85369085ex85444993 |
9410 |
Elastomeric connector, of rubber or silicone, consisting of one or more conductor elements |
0 % |
31.12.2013 |
| *ex85371099 |
92 |
Touch sensitive screen panel, consisting of a conductive grid between two glass or plastic plates or sheets, fitted with electric conductors and connectors |
0 % |
31.12.2013 |
| *ex85371099 |
93 |
Electronic control units for a voltage of 12 V, for use in the manufacture of vehicle mounted temperature control systems |
0 % |
31.12.2013 |
| *ex85371099ex85437090 |
9420 |
Unit consisting of two junction field effect transistors contained in a dual lead frame housing |
0 % |
31.12.2013 |
| *ex85371099ex85437090 |
9525 |
Unit consisting of two metal oxide semiconductor field effect transistors contained in a dual lead frame housing |
0 % |
31.12.2013 |
| *ex85389099 |
92 |
Part of an electrothermal fuse, consisting of a tin coated copper wire attached to a cylindrical casing, the exterior dimensions of which do not exceed 5 × 48 mm |
0 % |
31.12.2013 |
| *ex85393900 |
20 |
Cold cathode (CCFL) or External Electrode (EEFL) fluorescent lamps, of a diameter of not more than 5 mm and with a length of more than 120 mm but not more than 1570 mm |
0 % |
31.12.2011 |
| ex85401111 |
95 |
Colour cathode-ray tube with a slot mask, equipped with an electron gun and a deflection yoke and with a screen width/height ratio of 4/3 and a diagonal measurement of the screen of not more than 42 cm |
0 % |
31.12.2011 |
| *ex85401115 |
20 |
Full square curved screen colour cathode-ray tube, equipped with an electron gun and a deflection yoke and with a screen width/height ratio of 4/3 and a diagonal measurement of the screen of 68 cm (± 2 mm) |
0 % |
31.12.2011 |
| ex85401119 |
91 |
Colour cathode-ray tube equipped with electron guns placed side by side (in-line technology), with a diagonal measurement of the screen of 79 cm or more |
0 % |
31.12.2011 |
| *ex85401119 |
93 |
Colour cathode-ray tube equipped with an electron gun and a deflection yoke, with a screen width/height ratio of 4/3 and a diagonal measurement of the screen of more than 72 cm |
0 % |
31.12.2013 |
| *ex85401191 |
31 |
Colour cathode-ray tube with a screen width/height ratio of 16/9 and a diagonal measurement of the screen of 39,8 cm (±0,3 cm) |
0 % |
31.12.2013 |
| ex85402080 |
91 |
Photomultiplier consisting of a photocathode tube with 9 or 10 dyodes, for light of a wavelength of 160 nm or more but not more than 930 nm, of a diameter of not more than 14 mm and a height of not more than 94 mm |
0 % |
31.12.2011 |
| *ex85407100 |
20 |
Continuous wave magnetron with a fixed frequency of 2460 MHz, packaged magnet, probe output, for use in the manufacture of products falling within subheading 85165000 |
0 % |
31.12.2013 |
| *ex85408900 |
91 |
Displays in the form of a tube consisting of a glass housing mounted on a board the dimensions of which do not exceed 300 mm × 350 mm excluding leads. The tube contains one or more rows of characters or lines arranged in rows, each character or line consisting of fluorescent or phosphorescent elements. These elements are mounted on a metallised base which is covered with fluorescent substances or phosphorescent salts which give off light when bombarded with electrons |
0 % |
31.12.2013 |
| *ex85408900 |
92 |
Vacuum fluorescent display tube |
0 % |
31.12.2013 |
| *ex85409100 |
32 |
Electron gun of colour cathode-ray tubes with an anode voltage of 27,5 kV or more but not more than 36 kV |
0 % |
31.12.2013 |
| *ex85409100 |
92 |
Slit or slot mask, excluding masks with continuously vertical slits, with a diagonal measurement of 69 cm or less |
0 % |
31.12.2011 |
| ex85409100 |
95 |
Slit or slot mask (shadow mask), excluding masks with continuously vertical slits, with a diagonal measurement of 697,5 mm or more, but not more than 782,9 mm |
0 % |
31.12.2012 |
| ex85409100 |
96 |
Assembly for cathode-ray tubes with 2 or more but not more than 6 coils, a plastic support and a metal fixing ring, for the adjustment of display sharpness and/or convergence |
0 % |
31.12.2013 |
| *ex85437090 |
30 |
Amplifier, consisting of active and passive elements mounted on a printed circuit, contained in a housing |
0 % |
31.12.2013 |
| *ex85437090 |
35 |
Radio frequency (RF) modulator, operating with a frequency range of 43 MHz or more but not moer than 870 MHz, capable of switching VHF and UHF signals, consisting of active and passive elements mounted on a printed circuit, contained in a housing |
0 % |
31.12.2013 |
| *ex85437090 |
45 |
Piezo-electric crystal oscillator with a fixed frequency, within a frequency range of 1.8 MHz to 67 MHz, contained in a housing |
0 % |
31.12.2013 |
| *ex85437090 |
55 |
Opto-electronic circuit comprising one or more light-emitting diodes (LEDs), whether or not equipped with an integrated driving circuit, and one photodiode with amplifier circuit, whether or not with an integrated logic gate arrays circuit or one or more light-emitting diodes and at least 2 photodiodes with an amplifier circuit, whether or not with an integrated logic gate arrays circuit or other integrated circuits, contained in a housing |
0 % |
31.12.2013 |
| *ex85437090 |
60 |
Oscillator, with a centre frequency of 20 GHz or more but not more than 42 GHz, consisting of active and passive elements not mounted on a substrate, contained in a housing |
0 % |
31.12.2013 |
| *ex85437090 |
65 |
Audio recording and reproducing circuit, capable of stereo audio data storage and simultaneous record and playback, comprising 2 or 3 monolithic integrated circuits mounted on a printed circuit or a lead frame, contained in a housing |
0 % |
31.12.2013 |
| *ex85437090 |
80 |
Temperature compensated oscillator, comprising a printed circuit on which are mounted at least a piezo-electric crystal and an adjustable capacitor, contained in a housing |
0 % |
31.12.2013 |
| *ex85437090 |
85 |
Voltage controlled oscillator (VCO), other than temperature compensated oscillators, consisting of active and passive elements mounted on a printed circuit, contained in a housing |
0 % |
31.12.2013 |
| *ex85437090 |
90 |
Fuel cell module consisting of:-
polymer electrolyte membrane fuel cells in a housing with an integrated cooling system,
- a voltage monitoring unit and connections,
for use in the manufacture of car propulsion systems |
0 % |
31.12.2013 |
| *ex85439000 |
20 |
Stainless steel cathode in the form of a plate with a hanger bar, whether or not with plastic side strips |
0 % |
31.12.2013 |
| *ex85439000 |
30 |
Assembly of products falling within heading No 8541 or 8542 mounted on a printed circuit, contained in a housing |
0 % |
31.12.2013 |
| ex85439000 |
40 |
Part of an electrolysis device, consisting of a pan of nickel equipped with a wire mesh of nickel, fixed via ribs of nickel, and a pan of titanium equipped with a wire mesh of titanium, fixed via ribs of titanium, of which both pans are fixed together back to back |
0 % |
31.12.2012 |
| *ex85444993 |
20 |
PET/PVC insulated flexible cable with:-
a voltage of not more than 60 V,
- a current of not more than 1 A
- a heat resistance of not more than 105 oC,
- individual wires of a thickness of 0,05 mm (±0,01 mm) and a width of not more than 0,65 mm (±0,03 mm)
- distance between conductors of not more than 0,5 mm and
- pitch (distance from centreline to centreline of conductors) of not more than 1,08 mm
|
0 % |
31.12.2013 |
| *ex85451990 |
20 |
Carbon electrodes, for use in the manufacture of zinc-carbon batteries |
0 % |
31.12.2013 |
| *ex85471010 |
10 |
Insulated fitting of ceramics, containing by weight 90 % or more of aluminium oxide, metallized, in the form of a hollow cylindrical body of an external diameter of 20 mm or more but not more than 250 mm, for the manufacture of vacuum interrupters |
0 % |
31.12.2013 |
| *ex85489090 |
41 |
Unit, consisting of a resonator operating within a frequency range of 1,8 MHz or more but not more than 40 MHz and a capacitor, contained in a housing |
0 % |
31.12.2013 |
| *ex85489090 |
43 |
Contact image sensor |
0 % |
31.12.2013 |
| *ex85489090 |
47 |
Unit consisting of two or more light emitting diode chips operating at a typical wavelength of 440 nm or more but not more than 660 nm, contained in a lead frame housing whose exterior dimensions — without fittings — do not exceed 12 × 12 mm |
0 % |
31.12.2013 |
| *ex85489090 |
48 |
Optical unit, consisting at least of a laserdiode and a photodiode operating at a typical wavelength of 635 nm or more but not more than 815 nm |
0 % |
31.12.2013 |
| *ex85489090 |
49 |
LCD modules, solely consisting of one or more TFT glass or plastic cells, combined with touch screen facilities, with or without backlight unit, with or without inverters and one or more printed circuit boards with control electronics for pixel addressing only |
0 % |
31.12.2013 |
| ex87042391 |
20 |
Motor chassis with a self-ignition capacity of at least 8,500 cm3, fitted with a cabin on either 3, 4 or 5 wheels having a wheelbase of at least 480 cm, not containing working machinery, to be built into special purpose motor vehicles with a width of at least 300 cm to distribute fertlizers |
0 % |
31.12.2012 |
| ex87089997 |
20 |
Metal housing caps for incorporation into balancing-arms or spherical bearings used in the suspension systems for the front wheels of motor vehicles |
0 % |
31.12.2011 |
| *ex90011090 |
10 |
Image reverser made up from an assembly of optical fibres |
0 % |
31.12.2013 |
| ex90012000 |
10 |
Material consisting of a polarising film, whether or not on rolls, supported on one or both sides by transparent material |
0 % |
31.12.2012 |
| *ex90012000ex90019000 |
2055 |
Optical, diffuser, reflector or prism sheets, unprinted diffuser plates, whether or not possessing polarising properties, specifically cut |
0 % |
30.6.2009 |
| *ex90019000 |
35 |
Rear projection screen, comprising a lenticular plastic plate |
0 % |
31.12.2013 |
| *ex90019000 |
45 |
Rod of neodymium-doped yttrium-aluminium garnet (YAG) material, polished at both ends |
0 % |
31.12.2013 |
| *ex90019000 |
60 |
Reflector sheets in rolls |
0 % |
30.6.2009 |
| ex90019000 |
70 |
Polyethylene terephthalate film with a thickness of less than 300 μm according to ASTM D2103, having on one side prisms of acrylic resin with a prism angle of 90o and a prism pitch of 50 μm |
0 % |
31.12.2011 |
| ex90019000 |
75 |
Front filter comprising glass panels with special printing and film coating, for use in the manufacture of plasma display modules |
0 % |
31.12.2012 |
| *ex90019000 |
76 |
Plasma display panel (PDP) filter |
0 % |
31.12.2013 |
| *ex90021100 |
10 |
Adjustable lens unit, having a focal length of 90 mm or more but not more than 180 mm and comprising a combination of between 4 and 8 glass or methacrylic lenses with a diameter of 120 mm or more but not more than 180 mm, each lens coated on at least one side with a magnesium fluoride layer, for use in the manufacture of video projectors |
0 % |
31.12.2013 |
| *ex90021100 |
50 |
Lens unit, having a focal length of 25 mm or more but not more than 150 mm, consisting of glass or plastic lenses, with a diameter of 60 mm or more but not more than 190 mm |
0 % |
31.12.2013 |
| *ex90022000 |
10 |
Filter, consisting of a plastic polarising membrane, a glass plate and a transparent protective film, mounted on a metal frame, for use in the manufacture of products falling within heading 8528 |
0 % |
31.12.2013 |
| *ex90029000 |
20 |
Lens, mounted, having a fixed focal length of 3,8 mm (±0,19 mm) or 8 mm (±0,4 mm), with a relative aperture of F2,0 and a diameter of not more than 33 mm, for use in the manufacture of charged-coupled (CCD) cameras |
0 % |
31.12.2013 |
| *ex90029000 |
30 |
Optical unit, comprising 1 or 2 rows of optical glass fibres in the form of lenses and with a diameter of 0,85 mm or more but not more than 1,15 mm, embedded between 2 plastic plates |
0 % |
31.12.2013 |
| *ex90223000 |
10 |
X-ray tube with a target voltage of 4 kV or more but not more than 30 kV, a power of not more than 9 W and a target current of not more than 2 mA |
0 % |
31.12.2013 |
| *ex90271090 |
10 |
Sensor element for gas or smoke analysis in motor vehicles, essentially consisting of a zirconium-ceramic element in a metal housing |
0 % |
31.12.2013 |
| *ex90318034 |
30 |
Apparatus for measuring the angle and direction of rotation of motor vehicles, consisting of at least one yaw rate sensor in the form of a monocrystalline quartz, whether or not combined with one or more measuring sensors, the whole contained in a housing |
0 % |
31.12.2013 |
| *ex90318038 |
10 |
Acceleration measurement device for automotive applications, comprising one or more active and/or passive elements and one or more sensors, the whole contained in a housing |
0 % |
31.12.2013 |
| *ex90319085 |
20 |
Assembly for a laser align sensor, in the form of a printed circuit comprising optical filters and a charge-coupled image (CCD) sensor, the whole contained in a housing |
0 % |
31.12.2013 |
| ex90321089 |
20 |
Thermostat, damper or bimetal with,-
an opening temperature of + 7 oC (±1,5oC), closing temperature of - 4 oC(±1,5oC)for damper thermostat,
- an opening temperature of + 8 oC (± 3 oC) for bimetal thermostat;
for use in the manufacture of frost free refrigerators |
0 % |
31.12.2012 |
| *ex90328900 |
20 |
Automotive airbag shock-sensor, comprising a contact capable of switching a current of 12 A at a voltage of 30 V, having a typical contact resistance of 80 mOhm |
0 % |
31.12.2013 |
| *ex90328900 |
30 |
Electronic controller of electric power steering (EPS controller) |
0 % |
31.12.2013 |
| ex90328900 |
40 |
Digital valve controller for controlling liquids and gases |
0 % |
31.12.2012 |
| ex91070000 |
20 |
Mechanical timer for use in the manufacture of no-frost refrigerators |
0 % |
31.12.2011 |
| *ex94054035 |
10 |
Electric light assembly of synthetic material containing 3 fluorescent tubes (RBG) of a diameter of 3,0 mm (±0,2 mm), of a length of 420 mm (± 1 mm) or more, but not more than 600 mm (± 1 mm), for the manufacture of goods of heading 8528 |
0 % |
31.12.2013 |
| *ex94054039 |
10 |
Ambient light module with a length of 300 mm or more, but not more than 600 mm, based on a light engine of a series of 3 or more, but not more than 9 specific one chip red green and blue light emitting diodes mounted on a PCB, with light coupled to the front and/or back of the Flat TV set |
0 % |
30.6.2009 |
| *ex96089100 |
10 |
Non-fibrous plastic pen-tips with an internal channel |
0 % |
31.12.2013 |
| *ex96089100 |
20 |
Felt tips and other porous-tips for markers, without internal canal |
0 % |
31.12.2013 |
| *ex96121010 |
10 |
Ribbons of plastic with segments of different colours, providing the penetration of dyes by heat into a support (so called dye-sublimation) |
0 % |
31.12.2013 |