| CN code | TARIC | Description | Rate of autonomous duty% | Validity period |
|---|
| ex03026999ex03037998 | 1010 | Sturgeons, fresh, chilled or frozen, for processing | 0 | 1.1.2006 to 31.12.2008 |
| ex03026999 | 20 | Lump fish (Cyclopterus lumpus) with roe, fresh or chilled, for processing | 0 | 1.1.2006 to 31.12.2008 |
| ex03026999ex03037998 | 3020 | Red snapper (Lutjanus purpureus), fresh, chilled or frozen, for processing | 0 | 1.1.2006 to 31.12.2008 |
| ex03027000ex03027000ex03027000ex03027000ex03038090ex03038090 | 113141911019 | Hard fish roes, fresh, chilled or frozen | 0 | 1.1.2006 to 31.12.2008 |
| ex03031100ex03031900 | 1010 | Pacific salmon (Oncorhynchus spp.), frozen and headless, for the processing industry for manufacture into pastes or spreads | 0 | 1.1.2006 to 31.12.2008 |
| ex03041038ex03041098ex03042061ex03049097 | 45601031 | Fillets and meat of dogfish (Squalus acanthias), fresh, chilled or frozen | 6 | 1.1.2006 to 31.12.2008 |
| ex03052000ex03052000ex03052000ex03052000ex03052000 | 1118192130 | Hard fish roes, salted or in brine | 0 | 1.1.2006 to 31.12.2008 |
| ex03061990ex03062990 | 1010 | Krill for processing | 0 | 1.1.2006 to 31.12.2008 |
| ex06039000ex06049990 | 1010 | Flowers, flower buds, foliage, leaves and other parts of plants, not further prepared than dried, dyed or bleached, for use in the manufacture of pot pourri of subheading 33074900 | 0 | 1.1.2006 to 31.12.2008 |
| ex07102100 | 10 | Peas in pods, of the species Pisum sativum of the variety Hortense axiphium, frozen, of a thickness not exceeding 6 mm, to be used, in their pods, in the manufacture of prepared meals | 0 | 1.1.2006 to 31.12.2008 |
| ex07108095 | 50 | Bamboo shoots, frozen, not put up for retail sale | 0 | 1.1.2006 to 31.12.2008 |
| ex07123200ex07123300ex07123900 | 101031 | Mushrooms, excluding mushrooms of the genus Agaricus, dried, whole or in identifiable slices or pieces, for treatment other than simple repacking for retail sale | 0 | 1.1.2006 to 31.12.2008 |
| ex08041000 | 10 | Dates, fresh or dried, not put up for retail sale | 0 | 1.1.2006 to 31.12.2008 |
| ex08104050 | 10 | Fruit of the species Vaccinium macrocarpon, fresh | 0 | 1.1.2006 to 31.12.2008 |
| ex08109095 | 10 | Rose-hips, fresh | 0 | 1.1.2006 to 31.12.2008 |
| 0811905008119070ex08119095 | 69 | Fruit of the genus Vaccinium, uncooked or cooked by steaming or boiling in water, frozen, not containing added sugar or other sweetening matter | 0 | 1.1.2006 to 31.12.2008 |
| ex08119095 | 20 | Boysenberries, frozen, not containing added sugar, not put up for retail sale | 0 | 1.1.2006 to 31.12.2008 |
| ex08119095 | 30 | Pineapple (Ananas comosus), in pieces, frozen | 0 | 1.1.2006 to 31.12.2008 |
| ex08119095 | 40 | Rose-hips, uncooked or cooked by steaming or boiling in water, frozen, not containing added sugar or other sweetening matter | 0 | 1.1.2006 to 31.12.2008 |
| ex15119019ex15119091ex15131110ex15131930ex15132110ex15132930 | 101010101010 | Palm oil, coconut (copra) oil, palm kernel oil, for the manufacture of:- industrial monocarboxylic fatty acids of subheading 38231910,
- mixtures of methyl esters of fatty acids of subheading 38249099,
- methyl esters of fatty acids of heading 2915 or 2916,
- stearic acid of subheading 38231100 or
- goods of heading 3401
| 0 | 1.1.2006 to 31.12.2008 |
| ex15159099 | 92 | Vegetable oil, refined, containing by weight 35 % or more but not more than 50 % of arachidonic acid or 35 % or more but not more than 50 % of docosahexaenoic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex15180091 | 10 | Soya-bean oil, modified with maleic acid, for the manufacture of cosmetic products | 0 | 1.1.2006 to 31.12.2008 |
| ex16041100ex16042010 | 2020 | Pacific salmon (Oncorhynchus spp.), for the processing industry for manufacture into pastes or spreads | 0 | 1.1.2006 to 31.12.2008 |
| ex16043090 | 10 | Hard fish roes, washed, cleaned of adherent organs and simply salted or in brine, for processing | 0 | 1.1.2006 to 31.12.2008 |
| ex16051000ex16051000 | 1119 | Crabs of the species "King" (Paralithodes camchaticus), "Hanasaki" (Paralithodes brevipes), "Kegani" (Erimacrus isenbecki), "Queen" and "Snow" (Chionoecetes spp.), "Red" (Geryon quinquedens), "Rough stone" (Neolithodes asperrimus), Lithodes antarctica, "Mud" (Scylla serrata), "Blue" (Portunus spp.), simply boiled in water and shelled, whether or not frozen, in immediate packings of a net content of 2 kg or more | 0 | 1.1.2006 to 31.12.2008 |
| ex16051000ex16051000 | 9294 | Crabs of the species Paralomis granulosa | 0 | 1.1.2006 to 31.12.2008 |
| ex19023010ex19030000 | 1020 | Transparent noodles, cut in pieces, obtained from beans (Vigna radiata (L.) Wilczek), not put up for retail sale | 0 | 1.1.2006 to 31.12.2008 |
| ex20059080 | 70 | Bamboo shoots, prepared or preserved, in immediate packings of a net content exceeding 5 kg | 0 | 1.1.2006 to 31.12.2008 |
| ex21061020 | 10 | Soya protein isolate, containing by weight 6,6 % or more but not more than 8,6 % of calcium phosphate | 0 | 1.1.2006 to 31.12.2008 |
| ex23099099 | 20 | Calcium sodium phosphate, with a fluorine content of 0,005 % or more but less than 0,2 % by weight on the dry anhydrous product, for use in the manufacture of additives for animal feeding | 0 | 1.1.2006 to 31.12.2008 |
| ex27079911 | 10 | Crude light oils containing by weight:- 10 % or more of vinyltoluenes,
- 10 % or more of indene and
- 1 % or more but not more than 5 % of naphthalene
| 0 | 1.1.2006 to 31.12.2008 |
| ex27101125 | 10 | Mixture of isomers 2,4,4-trimethylpent-1-ene and 2,4,4-trimethylpent-2-ene | 0 | 1.1.2006 to 31.12.2008 |
| ex28053010 | 10 | Alloy of cerium and other rare-earth metals, containing by weight 47 % or more of cerium | 0 | 1.1.2006 to 31.12.2008 |
| ex28053010 | 20 | Alloy of lanthanum and other rare-earth metals, containing by weight 43 % or more of lanthanum | 0 | 1.1.2006 to 31.12.2008 |
| ex28053090 | 10 | Lanthanum of a purity by weight of 99 % or more | 0 | 1.1.2006 to 31.12.2008 |
| ex28111980 | 10 | Sulfamidic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex28112200 | 10 | Silicon dioxide in the form of powder, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges | 0 | 1.1.2006 to 31.12.2008 |
| ex28112990 | 10 | Tellurium dioxide | 0 | 1.1.2006 to 31.12.2008 |
| ex28129000 | 10 | Nitrogen trifluoride | 0 | 1.1.2006 to 31.12.2008 |
| ex28129000 | 20 | Silicon tetrafluoride | 0 | 1.1.2006 to 31.12.2008 |
| ex28183000 | 10 | Aluminium hydroxide oxide in the form of pseudo-boehmite | 4 | 1.1.2006 to 31.12.2008 |
| ex28199090 | 10 | Dichromium trioxide:- of a specific surface of 37 m2/g or more (as determined by the BET method),
- of a purity by weight of 99,5 % or more calculated on the dry substance,
- of a specific gravity of 1,2 g/cm3 or less,
for the manufacture of magnetic chromium dioxide | 0 | 1.1.2006 to 31.12.2008 |
| ex28209090 | 10 | Manganese (II, III) oxide containing by weight 70 % or more of manganese | 0 | 1.1.2006 to 31.12.2008 |
| ex28211000 | 10 | Diiron trioxide, in the form of powder, of a purity by weight of 99,2 % or more, for the manufacture of goods of heading 8504 | 0 | 1.1.2006 to 31.12.2008 |
| ex28230000 | 10 | Titanium dioxide, of a purity by weight of 99,9 % or more, with an average grain-size of 1,2 μm or more but not exceeding 1,8 μm, for the manufacture of goods of heading 8532 or 8533 | 0 | 1.1.2006 to 31.12.2008 |
| ex28255000 | 10 | Copper (I or II) oxide containing by weight 78 % or more of copper and not more than 0,03 % of chloride | 0 | 1.1.2006 to 31.12.2008 |
| ex28269090 | 10 | Potassium hexafluorophosphate | 0 | 1.1.2006 to 31.12.2008 |
| ex28273980 | 10 | Copper monochloride of a purity by weight of 96 % or more but not exceeding 99 % | 0 | 1.1.2006 to 31.12.2008 |
| ex28276000 | 10 | Titanium tetraiodide | 0 | 1.1.2006 to 31.12.2008 |
| ex28301000 | 10 | Disodium tetrasulfide, containing by weight 38 % or less of sodium calculated on the dry weight | 0 | 1.1.2006 to 31.12.2008 |
| ex28302000 | 10 | Zinc sulfide containing:- 20,0 mg/kg or less of chloride,
- 0,2 mg/kg or less of copper,
- 0,5 mg/kg or less of iron and
- 1,0 mg/kg or less of lead
| 0 | 1.1.2006 to 31.12.2008 |
| ex28332990 | 10 | Manganese sulphate monohydrate | 0 | 1.1.2006 to 31.12.2008 |
| ex28369100 | 20 | Lithium carbonate, containing one or more of the following impurities at the concentrations indicated:- 2 mg/kg or more of arsenic,
- 200 mg/kg or more of calcium,
- 200 mg/kg or more of chlorides,
- 20 mg/kg or more of iron,
- 150 mg/kg or more of magnesium,
- 20 mg/kg or more of heavy metals,
- 300 mg/kg or more of potassium,
- 300 mg/kg or more of sodium,
- 200 mg/kg or more of sulfates,
determined according to the methods specified in the European Pharmacopœia | 0 | 1.1.2006 to 31.12.2008 |
| ex28369918 | 10 | Zirconium (IV) basic carbonate | 0 | 1.1.2006 to 31.12.2008 |
| ex28371900 | 10 | Zinc cyanide | 0 | 1.1.2006 to 31.12.2008 |
| ex28371900 | 20 | Copper cyanide | 0 | 1.1.2006 to 31.12.2008 |
| ex28399000 | 10 | Lead silicate hydrate, of a lead content by weight of ((84,5 ± 1,5) %, evaluated as lead monoxide, in the form of powder | 0 | 1.1.2006 to 31.12.2008 |
| ex28399000 | 20 | Calcium silicate | 0 | 1.1.2006 to 31.12.2008 |
| ex28429090 | 10 | Ammonium sulfamidate | 0 | 1.1.2006 to 31.12.2008 |
| ex28439090 | 20 | Palladium monoxide | 0 | 1.1.2006 to 31.12.2008 |
| ex28439090 | 30 | Mixture of palladium phthalocyanines | 0 | 1.1.2006 to 31.12.2008 |
| 28451000 | | Heavy water (deuterium oxide) (Euratom) | 0 | 1.1.2006 to 31.12.2008 |
| 28459010 | | Deuterium and compounds thereof; hydrogen and compounds thereof, enriched in deuterium; mixtures and solutions containing these products (Euratom) | 0 | 1.1.2006 to 31.12.2008 |
| ex28461000ex38249099 | 1048 | Rare-earth concentrate containing by weight 60 % or more but not more than 95 % of rare-earth oxides and not more than 1 % each of zirconium oxide, aluminium oxide or iron oxide, and having a loss on ignition of 5 % or more by weight | 0 | 1.1.2006 to 31.12.2008 |
| ex28461000 | 20 | Dicerium tricarbonate, whether or not hydrated | 0 | 1.1.2006 to 31.12.2008 |
| ex28461000 | 30 | Cerium lanthanum carbonate, whether or not hydrated | 0 | 1.1.2006 to 31.12.2008 |
| ex28461000 | 40 | Cerium lanthanum neodymium praseodymium carbonate, whether or not hydrated | 0 | 1.1.2006 to 31.12.2008 |
| 28469000 | | Compounds, inorganic or organic, of rare-earth metals, of yttrium or of scandium or of mixtures of these metals, other than those of subheading 28461000 | 0 | 1.1.2006 to 31.12.2008 |
| ex28480000 | 10 | Phosphine | 0 | 1.1.2006 to 31.12.2008 |
| ex28500020 | 10 | Silane | 0 | 1.1.2006 to 31.12.2008 |
| ex28500020 | 20 | Arsine | 0 | 1.1.2006 to 31.12.2008 |
| ex29033080 | 10 | Carbon tetrafluoride (tetrafluoromethane) | 0 | 1.1.2006 to 31.12.2008 |
| ex29033080 | 20 | 1,1,1,2,3,3,3-Heptafluoropropane | 0 | 1.1.2006 to 31.12.2008 |
| ex29033080 | 30 | Perfluoroethane | 0 | 1.1.2006 to 31.12.2008 |
| ex29033080 | 40 | 1,1-Difluoroethane | 0 | 1.1.2006 to 31.12.2008 |
| ex29033080 | 50 | 1,1,1,3,3-Pentafluoropropane | 0 | 1.1.2006 to 31.12.2008 |
| ex29033080 | 60 | Octafluoropropane | 0 | 1.1.2006 to 31.12.2008 |
| ex29034300 | 10 | 1,1,1-Trichlorotrifluoroethane | 0 | 1.1.2006 to 31.12.2008 |
| ex29034910 | 10 | Chloro-1,1,1-trifluoroethane | 0 | 1.1.2006 to 31.12.2008 |
| ex29035990 | 10 | 1,6,7,8,9,14,15,16,17,17,18,18-Dodecachloropentacyclo= [12.2.1.16,9.02,13.05,10]octadeca-7,15-diene | 0 | 1.1.2006 to 31.12.2008 |
| ex29035990 | 20 | Hexachlorocyclopentadiene | 0 | 1.1.2006 to 31.12.2008 |
| ex29036990 | 10 | Di- or tetrachlorotricyclo[8.2.2.24,7]hexadeca-1(12),4,6,10,13,15-hexaene, mixed isomers | 0 | 1.1.2006 to 31.12.2008 |
| ex29036990 | 20 | 1,2-Bis(pentabromophenyl)ethane | 0 | 1.1.2006 to 31.12.2008 |
| ex29036990 | 40 | 2,6-Dichlorotoluene, of a purity by weight of 99 % or more and containing:- 0,001 mg/kg or less of tetrachlorodibenzodioxines,
- 0,001 mg/kg or less of tetrachlorodibenzofurans,
- 0,2 mg/kg or less of tetrachlorobiphenyls
| 0 | 1.1.2006 to 31.12.2008 |
| ex29036990 | 50 | 1-(Chloromethyl)naphthalene | 0 | 1.1.2006 to 31.12.2008 |
| ex29036990 | 60 | α-Chloro(ethyl)toluenes | 0 | 1.1.2006 to 31.12.2008 |
| ex29041000 | 30 | Sodium p-styrenesulfonate | 0 | 1.1.2006 to 31.12.2008 |
| ex29042000 | 10 | Nitromethane | 0 | 1.1.2006 to 31.12.2008 |
| ex29042000 | 20 | Nitroethane | 0 | 1.1.2006 to 31.12.2008 |
| ex29042000 | 30 | 1-Nitropropane | 0 | 1.1.2006 to 31.12.2008 |
| ex29042000 | 40 | 2-Nitropropane | 0 | 1.1.2006 to 31.12.2008 |
| ex29042000 | 50 | 2,2'-dinitro-bibenzyl | 0 | 1.1.2006 to 31.12.2008 |
| ex29049020 | 10 | Tosyl chloride | 0 | 1.1.2006 to 31.12.2008 |
| ex29049040 | 10 | Trichloronitromethane, for the manufacture of goods of subheading 380820 | 0 | 1.1.2006 to 31.12.2008 |
| ex29049085 | 10 | Quintozene (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29049085 | 20 | 1-Chloro-2,4-dinitrobenzene | 0 | 1.1.2006 to 31.12.2008 |
| ex29049085 | 30 | 5-Nitro-1,2,4-trichlorobenzene | 0 | 1.1.2006 to 31.12.2008 |
| ex29051900ex38249099 | 1156 | Potassium tert-butanolate (potassium tert-butoxide), whether or not in the form of a solution in tetrahydrofuran | 0 | 1.1.2006 to 31.12.2008 |
| ex29051900 | 30 | 2,6-Dimethylheptan-4-ol | 0 | 1.1.2006 to 31.12.2008 |
| ex29053985 | 20 | Hexa-1,5-diene-3,4-diol | 0 | 1.1.2006 to 31.12.2008 |
| ex29054910 | 10 | Ethylidynetrimethanol | 0 | 1.1.2006 to 31.12.2008 |
| 29061100 | | Menthol | 0 | 1.1.2006 to 31.12.2008 |
| ex29061900 | 10 | Cyclohex-1,4-ylenedimethanol | 0 | 1.1.2006 to 31.12.2008 |
| ex29061900 | 20 | 4,4'-Isopropylidenedicyclohexanol | 0 | 1.1.2006 to 31.12.2008 |
| ex29062900 | 10 | 2,2'-(m-Phenylene)dipropan-2-ol | 0 | 1.1.2006 to 31.12.2008 |
| ex29062900 | 20 | 1-Hydroxymethyl-4-methyl-2,3,5,6-tetrafluorobenzene | 0 | 1.1.2006 to 31.12.2008 |
| ex29071900 | 10 | 2,3,5-Trimethylphenol | 0 | 1.1.2006 to 31.12.2008 |
| ex29072100 | 10 | Resorcinol | 0 | 1.1.2006 to 31.12.2008 |
| ex29072900 | 10 | Disodium 1,4-dihydroanthracene-9,10-diolate, in the form of an aqueous solution | 0 | 1.1.2006 to 31.12.2008 |
| ex29072900 | 20 | 4,4'-(3,3,5-Trimethylcyclohexylidene)diphenol | 0 | 1.1.2006 to 31.12.2008 |
| ex29072900 | 30 | 4,4',4"-Ethylidynetriphenol | 0 | 1.1.2006 to 31.12.2008 |
| ex29072900 | 40 | Mixture of isomers of methylenediphenol | 0 | 1.1.2006 to 31.12.2008 |
| ex29072900 | 50 | 6,6',6"-Tricyclohexyl-4,4',4"-butane-1,1,3-triyltri(m-cresol) | 0 | 1.1.2006 to 31.12.2008 |
| ex29072900 | 60 | 4,4'-(1,3-Phenylenediisopropylidene)diphenol | 0 | 1.1.2006 to 31.12.2008 |
| ex29072900 | 70 | 2,2',2",6,6',6"-Hexa-tert-butyl-α, α',α"-(mesitylene-2,4,6-triyl)tri-= p-cresol | 0 | 1.1.2006 to 31.12.2008 |
| ex29072900 | 80 | Pyrogallol | 0 | 1.1.2006 to 31.12.2008 |
| ex29072900 | 85 | Phloroglucinol whether or not hydrated | 0 | 1.1.2006 to 31.12.2008 |
| ex29082000 | 10 | Disodium 3-hydroxynaphthalene-2,7-disulfonate | 0 | 1.1.2006 to 31.12.2008 |
| ex29082000 | 20 | Dipotassium 7-hydroxynaphthalene-1,3-disulfonate | 0 | 1.1.2006 to 31.12.2008 |
| ex29082000ex38249099 | 3074 | 6-Hydroxynaphthalene-2-sulfonic acid and its salts | 0 | 1.1.2006 to 31.12.2008 |
| ex29089000 | 10 | 4-Nitroso-o-cresol | 0 | 1.1.2006 to 31.12.2008 |
| ex29089000 | 30 | 4-Nitrophenol | 0 | 1.1.2006 to 31.12.2008 |
| ex29089000 | 40 | 3-Nitro-p-cresol | 0 | 1.1.2006 to 31.12.2008 |
| ex29091900 | 10 | 1,2-Bis(2-chloroethoxy)ethane | 0 | 1.1.2006 to 31.12.2008 |
| ex29091900 | 20 | Bis(2-chloroethyl) ether | 0 | 1.1.2006 to 31.12.2008 |
| ex29091900 | 30 | Mixture of isomers of nonafluorobutyl methyl ether or nonafluorobutyl ethyl ether, of a purity by weight of 99 % or more | 0 | 1.1.2006 to 31.12.2008 |
| ex29093038 | 10 | Bis(pentabromophenyl) ether | 0 | 1.1.2006 to 31.12.2008 |
| ex29093090 | 10 | 4-(p-Tolyloxy)biphenyl | 0 | 1.1.2006 to 31.12.2008 |
| ex29093090 | 20 | 1,2-Bis(m-tolyloxy)ethane | 0 | 1.1.2006 to 31.12.2008 |
| ex29093090 | 30 | 1,2-Diphenoxyethane | 0 | 1.1.2006 to 31.12.2008 |
| ex29094400 | 10 | 2-Hexyloxyethanol | 0 | 1.1.2006 to 31.12.2008 |
| ex29094919 | 10 | 1-tert-Butoxypropan-2-ol | 0 | 1.1.2006 to 31.12.2008 |
| ex29095090 | 10 | 4-(2-Methoxyethyl)phenol | 0 | 1.1.2006 to 31.12.2008 |
| ex29096000 | 10 | Bis(α, α-dimethylbenzyl) peroxide | 0 | 1.1.2006 to 31.12.2008 |
| ex29109000 | 30 | 2,3-Epoxypropan-1-ol (glycidol) | 0 | 1.1.2006 to 31.12.2008 |
| ex29109000 | 40 | Perfluoroepoxypropane | 0 | 1.1.2006 to 31.12.2008 |
| ex29109000ex38249099 | 6059 | 1,2-Epoxyoctadecane, of a purity by weight of 82 % or more | 0 | 1.1.2006 to 31.12.2008 |
| ex29109000 | 70 | (Epoxyethyl)benzene (styrene oxide) | 0 | 1.1.2006 to 31.12.2008 |
| ex29122900 | 10 | Terephthalaldehyde | 0 | 1.1.2006 to 31.12.2008 |
| ex29124900 | 10 | 3-Phenoxybenzaldehyde | 0 | 1.1.2006 to 31.12.2008 |
| ex29141990 | 10 | 3,3-Dimethylbutan-2-one | 0 | 1.1.2006 to 31.12.2008 |
| 29142100 | | Camphor | 0 | 1.1.2006 to 31.12.2008 |
| ex29142900 | 10 | Estr-4-ene-3,17-dione | 0 | 1.1.2006 to 31.12.2008 |
| ex29142900 | 20 | Cyclohexadec-8-enone | 0 | 1.1.2006 to 31.12.2008 |
| ex29143900 | 10 | Benz[de]anthracen-7-one | 0 | 1.1.2006 to 31.12.2008 |
| ex29145000 | 30 | 2'-Hydroxyacetophenone | 0 | 1.1.2006 to 31.12.2008 |
| ex29145000 | 40 | 4'-Hydroxyacetophenone | 0 | 1.1.2006 to 31.12.2008 |
| ex29145000 | 50 | 6'-Methoxy-2'-acetonaphthone | 0 | 1.1.2006 to 31.12.2008 |
| ex29146990 | 10 | 2-Ethylanthraquinone | 0 | 1.1.2006 to 31.12.2008 |
| ex29146990 | 20 | 2-Pentylanthraquinone | 0 | 1.1.2006 to 31.12.2008 |
| ex29146990 | 30 | 1,4-Dihydroxyanthraquinone | 0 | 1.1.2006 to 31.12.2008 |
| ex29146990 | 40 | 2,3-Dihydro-1,4-dihydroxyanthraquinone | 0 | 1.1.2006 to 31.12.2008 |
| ex29146990 | 50 | 2-Methylanthraquinone | 0 | 1.1.2006 to 31.12.2008 |
| ex29147000 | 10 | 1-Chloro-3,3-dimethylbutan-2-one | 0 | 1.1.2006 to 31.12.2008 |
| ex29147000 | 30 | 4,4'-Dibromobenzil | 0 | 1.1.2006 to 31.12.2008 |
| ex29147000 | 40 | Perfluoro(2-methylpentan-3-one) | 0 | 1.1.2006 to 31.12.2008 |
| ex29147000 | 50 | 3'-Chloropropiophenone | 0 | 1.1.2006 to 31.12.2008 |
| 29152400 | | Acetic anhydride | 0 | 1.1.2006 to 31.12.2008 |
| ex29152900 | 10 | Antimony triacetate | 0 | 1.1.2006 to 31.12.2008 |
| ex29153990 | 20 | 5α-Bromo-6β-hydroxy-17-oxo-androstan-3β-yl acetate | 0 | 1.1.2006 to 31.12.2008 |
| ex29153990 | 30 | But-3-ene-1,2-diyl di(acetate) | 0 | 1.1.2006 to 31.12.2008 |
| ex29153990 | 40 | tert-Butyl acetate | 0 | 1.1.2006 to 31.12.2008 |
| ex29153990 | 50 | 3-Acetylphenyl acetate | 0 | 1.1.2006 to 31.12.2008 |
| ex29153990 | 60 | 1-Phenylethyl acetate | 0 | 1.1.2006 to 31.12.2008 |
| ex29154000 | 10 | Vinyl chloroacetate | 0 | 1.1.2006 to 31.12.2008 |
| ex29159080 | 20 | Trimethyl orthoacetate | 0 | 1.1.2006 to 31.12.2008 |
| ex29159080 | 30 | 2-Ethylbutyric acid | 0 | 1.1.2006 to 31.12.2008 |
| ex29159080 | 40 | Nonanoic acid (pelargonic acid) | 0 | 1.1.2006 to 31.12.2008 |
| ex29161290 | 10 | 2-tert-Butyl-6-(3-tert-butyl-2-hydroxy-5-methylbenzyl)= - 4-methylphenyl acrylate | 0 | 1.1.2006 to 31.12.2008 |
| ex29161290 | 20 | 2-Ethoxyethyl acrylate | 0 | 1.1.2006 to 31.12.2008 |
| ex29161290 | 30 | Isobutyl acrylate | 0 | 1.1.2006 to 31.12.2008 |
| ex29161300 | 10 | Hydroxyzinc methacrylate, in the form of powder | 0 | 1.1.2006 to 31.12.2008 |
| ex29161300 | 20 | Zinc dimethacrylate, in the form of powder | 0 | 1.1.2006 to 31.12.2008 |
| ex29161490 | 10 | 2,3-Epoxypropyl methacrylate | 0 | 1.1.2006 to 31.12.2008 |
| ex29161980 | 20 | Methyl 3,3-dimethylpent-4-enoate | 0 | 1.1.2006 to 31.12.2008 |
| ex29162000 | 10 | Methyl 3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylate | 0 | 1.1.2006 to 31.12.2008 |
| ex29162000 | 30 | Empenthrin (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29162000 | 50 | Ethyl 2,2-dimethyl-3-(2-methylpropenyl)cyclopropanecarboxylate | 0 | 1.1.2006 to 31.12.2008 |
| ex29163900 | 15 | Biphenyl-4-carboxylic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex29163900 | 20 | 3,5-Dichlorobenzoyl chloride | 3.6 | 1.1.2006 to 31.12.2008 |
| ex29163900 | 25 | p-Toluic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex29163900 | 35 | o-Chlorophenylacetic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex29163900 | 40 | Vinyl 4-tert-butylbenzoate | 0 | 1.1.2006 to 31.12.2008 |
| ex29163900 | 50 | 3,5-Dimethylbenzoyl chloride | 0 | 1.1.2006 to 31.12.2008 |
| ex29163900 | 60 | 4-Ethylbenzoyl chloride | 0 | 1.1.2006 to 31.12.2008 |
| ex29163900 | 70 | Ibuprofen (INN) | 0 | 1.1.2006 to 31.12.2008 |
| ex29163900 | 80 | Ethyl 2-(4-nitrophenyl)butyrate | 0 | 1.1.2006 to 31.12.2008 |
| ex29163900 | 85 | 2,6-difluorobenzoic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex29171100 | 20 | Bis(p-methylbenzyl) oxalate | 0 | 1.1.2006 to 31.12.2008 |
| ex29171990 | 20 | Sodium 1,2-bis(cyclohexyloxycarbonyl)ethanesulfonate | 0 | 1.1.2006 to 31.12.2008 |
| ex29171990 | 40 | Dodecanedioic acid, of a purity by weight of more than 98,5 % | 0 | 1.1.2006 to 31.12.2008 |
| ex29171990 | 50 | Glutaric anhydride | 0 | 1.1.2006 to 31.12.2008 |
| ex29171990 | 60 | Diethyl isobutylmalonate | 0 | 1.1.2006 to 31.12.2008 |
| ex29171990 | 70 | Itaconic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex29172000 | 30 | 1,4,5,6,7,7-Hexachloro-8,9,10-trinorborn-5-ene-2,3-dicarboxylic anhydride | 0 | 1.1.2006 to 31.12.2008 |
| ex29172000 | 40 | 3-Methyl-1,2,3,6-tetrahydrophthalic anhydride | 0 | 1.1.2006 to 31.12.2008 |
| ex29173400 | 10 | Diallyl phthalate | 0 | 1.1.2006 to 31.12.2008 |
| ex29173980 | 10 | Dimethyl naphthalene-2,6-dicarboxylate | 0 | 1.1.2006 to 31.12.2008 |
| ex29173980 | 20 | Benzene-1,2,4,5-tetracarboxylic acid (pyromellitic acid) | 0 | 1.1.2006 to 31.12.2008 |
| ex29173980 | 30 | Benzene-1,2: 4,5-tetracarboxylic dianhydride (pyromellitic dianhydride) | 0 | 1.1.2006 to 31.12.2008 |
| ex29173980 | 40 | Biphenyl-3,4: 3',4'-tetracarboxylic dianhydride | 0 | 1.1.2006 to 31.12.2008 |
| ex29181300 | 10 | L-(-)-Di-p-toluoyltartaric acid | 0 | 1.1.2006 to 31.12.2008 |
| ex29181980 | 20 | L-Malic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex29181980 | 30 | 2,2-Bis(hydroxymethyl)butyric acid | 0 | 1.1.2006 to 31.12.2008 |
| ex29181980 | 50 | DL-mandelic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex29182910 | 10 | Monohydroxynaphthoic acids | 0 | 1.1.2006 to 31.12.2008 |
| ex29182980 | 10 | Hexamethylene bis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate] | 0 | 1.1.2006 to 31.12.2008 |
| ex29182980 | 20 | Gallic acid, of a purity by weight of 98,5 % or more calculated on the dry weight (measured by acidimetry) | 0 | 1.1.2006 to 31.12.2008 |
| ex29183000 | 20 | 2-(4-Ethylbenzoyl)benzoic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex29189090 | 10 | 3,4-Epoxycyclohexylmethyl 3,4-epoxycyclohexanecarboxylate | 0 | 1.1.2006 to 31.12.2008 |
| ex29189090 | 20 | Methyl 3-methoxyacrylate | 0 | 1.1.2006 to 31.12.2008 |
| ex29189090 | 30 | Methyl 2-(4-hydroxyphenoxy)propionate | 0 | 1.1.2006 to 31.12.2008 |
| ex29189090 | 40 | trans-4-Hydroxy-3-methoxycinnamic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex29189090 | 50 | Methyl 3,4,5-trimethoxybenzoate | 0 | 1.1.2006 to 31.12.2008 |
| ex29189090 | 60 | 3,4,5-Trimethoxybenzoic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex29189090 | 70 | methyl 5-methoxy-3-oxopentanoate | 0 | 1.1.2006 to 31.12.2008 |
| ex29190090 | 10 | 2,2'-Methylenebis(4,6-di-tert-butylphenyl) phosphate, monosodium salt | 0 | 1.1.2006 to 31.12.2008 |
| ex29190090 | 20 | Diammonium salt of tetramyristoylcardiolipin | 0 | 1.1.2006 to 31.12.2008 |
| ex29190090 | 30 | Aluminium hydroxybis[2,2'-methylenebis(4,6-di-tert-butylphenyl)phosphate] | 0 | 1.1.2006 to 31.12.2008 |
| ex29190090 | 40 | Tri-n-hexylphosphate | 0 | 1.1.2006 to 31.12.2008 |
| ex29201000 | 10 | Fenitrothion (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29201000 | 20 | Tolclofos-methyl (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29209010 | 10 | Diethyl sulfate | 0 | 1.1.2006 to 31.12.2008 |
| ex29209010 | 20 | Diallyl 2,2'-oxydiethyl dicarbonate | 0 | 1.1.2006 to 31.12.2008 |
| ex29209010 | 30 | 4-Ethyl-1,3-dioxolan-2-one | 0 | 1.1.2006 to 31.12.2008 |
| ex29209010 | 40 | Dimethyl carbonate | 0 | 1.1.2006 to 31.12.2008 |
| ex29209010 | 50 | Di-tert-butyl dicarbonate | 0 | 1.1.2006 to 31.12.2008 |
| 29209030 | | Trimethyl phosphite | 0 | 1.1.2006 to 31.12.2008 |
| ex29209085 | 10 | O, O'-Dioctadecyl pentaerythritol bis(phosphite) | 0 | 1.1.2006 to 31.12.2008 |
| ex29209085 | 40 | Tritolyl phosphite | 0 | 1.1.2006 to 31.12.2008 |
| ex29209085 | 50 | Triisooctylphosphite | 0 | 1.1.2006 to 31.12.2008 |
| ex29211980 | 10 | Triallylamine | 0 | 1.1.2006 to 31.12.2008 |
| ex29211980 | 20 | Ethyl(2-methylallyl)amine | 0 | 1.1.2006 to 31.12.2008 |
| ex29211980 | 30 | Allylamine | 0 | 1.1.2006 to 31.12.2008 |
| ex29212900 | 10 | N, N,N',N'-Tetrabutylhexamethylenediamine | 0 | 1.1.2006 to 31.12.2008 |
| ex29212900 | 20 | Tris[3-(dimethylamino)propyl]amine | 0 | 1.1.2006 to 31.12.2008 |
| ex29212900 | 30 | Bis[3-(dimethylamino)propyl]methylamine | 0 | 1.1.2006 to 31.12.2008 |
| ex29212900 | 40 | N, N'-Di-tert-butylethylenediamine | 0 | 1.1.2006 to 31.12.2008 |
| ex29213099 | 10 | Dicyclohexyl(methyl)amine | 0 | 1.1.2006 to 31.12.2008 |
| ex29213099 | 20 | Cyclohex-1,3-ylenebis(methylamine), for the manufacture of dishwashing products | 0 | 1.1.2006 to 31.12.2008 |
| ex29214210 | 10 | 2,6-Dichloro-4-nitroaniline | 0 | 1.1.2006 to 31.12.2008 |
| ex29214210 | 15 | 4-Amino-3-nitrobenzenesulphonic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex29214210 | 20 | 2-Bromo-4,6-dinitroaniline | 0 | 1.1.2006 to 31.12.2008 |
| ex29214210 | 25 | Sodium hydrogen 2-aminobenzene-1,4-disulphonate | 0 | 1.1.2006 to 31.12.2008 |
| ex29214210 | 30 | 4-Aminobenzene-1,3-disulfonic acid and its salts | 0 | 1.1.2006 to 31.12.2008 |
| ex29214210 | 40 | 2-Bromo-6-chloro-4-nitroaniline | 0 | 1.1.2006 to 31.12.2008 |
| ex29214210 | 50 | 3-Aminobenzenesulfonic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex29214210 | 70 | 2-Aminobenzene-1,4-disulfonic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex29214210 | 80 | 4-Chloro-2-nitroaniline | 0 | 1.1.2006 to 31.12.2008 |
| ex29214210 | 85 | 3,5-dichloroaniline | 0 | 1.1.2006 to 31.12.2008 |
| ex29214300 | 10 | 5-Amino-2-chlorotoluene-4-sulfonic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex29214300 | 20 | 4-Amino-6-chlorotoluene-3-sulfonic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex29214300 | 30 | 3-Nitro-p-toluidine | 0 | 1.1.2006 to 31.12.2008 |
| ex29214400 | 10 | Methyldiphenylamine | 0 | 1.1.2006 to 31.12.2008 |
| ex29214400 | 20 | Diphenylamine | 0 | 1.1.2006 to 31.12.2008 |
| ex29214500 | 10 | Sodium hydrogen 3-aminonaphthalene-1,5-disulfonate | 0 | 1.1.2006 to 31.12.2008 |
| ex29214500 | 20 | 2-Aminonaphthalene-1,5-disulfonic acid and its sodium salts | 0 | 1.1.2006 to 31.12.2008 |
| ex29214500 | 30 | 2-Aminonaphthalene-1-sulfonic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex29214500 | 40 | 1-Naphthylamine | 0 | 1.1.2006 to 31.12.2008 |
| ex29214910 | 20 | Pendimethalin (ISO) | 3.5 | 1.1.2006 to 31.12.2008 |
| ex29214980 | 10 | 8-Anilinonaphthalene-1-sulfonic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex29214980 | 20 | N-1-Naphthylaniline | 0 | 1.1.2006 to 31.12.2008 |
| ex29215119 | 20 | Toluene diamine (TDA), containing by weight 78 % or more but not more than 82 % of 4-methyl-m-phenylenediamine and 18 % or more but not more than 22 % of 2-methyl-m-phenylenediamine, and with a residual tar content of not more than 0,23 % by weight | 0 | 1.1.2006 to 31.12.2008 |
| ex29215990 | 10 | Mixture of isomers of 3,5-diethyltoluenediamine | 0 | 1.1.2006 to 31.12.2008 |
| ex29215990ex38249099 | 2068 | 4-(4-Aminoanilino)-3-nitrobenzenesulfonic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex29215990 | 40 | 4,4'-diaminostilbene-2,2'-disulphonic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex29221980 | 10 | 4,4-Dimethoxybutylamine | 0 | 1.1.2006 to 31.12.2008 |
| ex29221980 | 30 | N, N,N',N'-Tetramethyl-2,2'-oxybis(ethylamine) | 0 | 1.1.2006 to 31.12.2008 |
| ex29221980 | 40 | 2-Amino-2-methylpropanol, for use in the manufacture of goods of subheadings 300490 and 330530 | 0 | 1.1.2006 to 31.12.2008 |
| ex29221980 | 50 | 2-(2-Methoxyphenoxy)ethylamine | 0 | 1.1.2006 to 31.12.2008 |
| ex29221980 | 60 | N, N,N'-trimethyl-N'-(2-hydroxy-ethyl) 2,2'-oxybis(ethylamine) | 0 | 1.1.2006 to 31.12.2008 |
| ex29222100 | 10 | 2-Amino-5-hydroxynaphthalene-1,7-disulfonic acid and its salts, of a purity by weight of 60 % or more | 0 | 1.1.2006 to 31.12.2008 |
| ex29222100 | 20 | 4-Hydroxy-7-methylaminonaphthalene-2-sulfonic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex29222100 | 30 | 6-Amino-4-hydroxynaphthalene-2-sulfonic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex29222100 | 40 | 7-Amino-4-hydroxynaphthalene-2-sulfonic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex29222100 | 50 | Sodium hydrogen 4-amino-5-hydroxynaphthalene-2,7-disulphonate | 0 | 1.1.2006 to 31.12.2008 |
| ex29222200 | 10 | Anisidines | 0 | 1.1.2006 to 31.12.2008 |
| ex29222900 | 10 | 2-Methyl-N-phenyl-p-anisidine | 0 | 1.1.2006 to 31.12.2008 |
| ex29222900 | 15 | N-Methyl-2-(3,4-dimethoxyphenyl)ethylamine | 0 | 1.1.2006 to 31.12.2008 |
| ex29222900 | 20 | 3-Aminophenol | 0 | 1.1.2006 to 31.12.2008 |
| ex29222900 | 30 | 4-Amino-5-methoxy-2-methylbenzenesulfonic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex29222900 | 40 | 2-Amino-4-tert-pentyl-6-nitrophenol | 0 | 1.1.2006 to 31.12.2008 |
| ex29222900 | 50 | 6-Methoxy-m-toluidine | 0 | 1.1.2006 to 31.12.2008 |
| ex29222900 | 60 | 3,5-Dichloro-4-(1,1,2,2-tetrafluoroethoxy)aniline | 0 | 1.1.2006 to 31.12.2008 |
| ex29222900 | 70 | 4-Nitro-o-anisidine | 0 | 1.1.2006 to 31.12.2008 |
| ex29222900 | 80 | 3-Diethylaminophenol | 0 | 1.1.2006 to 31.12.2008 |
| ex29223900 | 10 | 1-Amino-4-bromo-9,10-dioxoanthracene-2-sulfonic acid and its salts | 0 | 1.1.2006 to 31.12.2008 |
| ex29223900 | 20 | 1-Aminoanthraquinone | 0 | 1.1.2006 to 31.12.2008 |
| ex29223900 | 30 | 1-Bromo-4-methylaminoanthraquinone | 0 | 1.1.2006 to 31.12.2008 |
| ex29223900 | 40 | 1,4-Diamino-2,3-dichloroanthraquinone | 0 | 1.1.2006 to 31.12.2008 |
| ex29223900 | 50 | 2-Aminoanthraquinone | 0 | 1.1.2006 to 31.12.2008 |
| ex29223900 | 60 | 1,4-Diamino-2,3-dihydroanthraquinone | 0 | 1.1.2006 to 31.12.2008 |
| ex29224300 | 10 | Anthranilic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex29224995 | 10 | Ornithine aspartate (INNM) | 0 | 1.1.2006 to 31.12.2008 |
| ex29224995 | 20 | 12-Aminododecanoic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex29224995 | 30 | DL-Aspartic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex29224995 | 40 | Norvaline | 0 | 1.1.2006 to 31.12.2008 |
| ex29225000 | 30 | 2-(3-Amino-4-chlorobenzoyl)benzoic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex29225000 | 50 | 2-(4-Dibutylaminosalicyloyl)benzoic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex29225000 | 70 | 2-(1-Hydroxycyclohexyl)-2-(4-methoxyphenyl)ethylammonium acetate | 0 | 1.1.2006 to 31.12.2008 |
| ex29239000 | 10 | Tetramethylammonium hydroxide, in the form of an aqueous solution containing:- (25 ± 0,5) % by weight of tetramethylammonium hydroxide,
- 500 mg/kg or less of carbonate,
- 200 mg/kg or less of chloride and
- 5 mg/kg or less of potassium
| 0 | 1.1.2006 to 31.12.2008 |
| ex29239000 | 15 | 3-chloro-2-hydroxypropyldimethyldodecylammoniumchloride in the form of an aqueous solution | 0 | 1.1.2006 to 31.12.2008 |
| ex29239000 | 30 | Tetramethylammonium hydroxide pentahydrate, of a purity by weight of 98 % or more | 0 | 1.1.2006 to 31.12.2008 |
| ex29239000 | 40 | Benzyldimethyl(octadecyl)ammonium salts, for use in the manufacture of toner for photocopiers | 0 | 1.1.2006 to 31.12.2008 |
| ex29239000 | 50 | Tetraethylammonium hydroxide, in the form of an aqueous solution containing:- (35 ± 0,5) % by weight of tetraethylammonium hydroxide,
- 2000 mg/kg or less of chloride,
- 2 mg/kg or less of iron and
- 10 mg/kg or less of potasium
| 0 | 1.1.2006 to 31.12.2008 |
| ex29239000 | 60 | Tetrabutylammonium hydroxide, in the form of an aqueous solution containing by weight:- (55 ± 1,0) % of tetrabutylammonium hydroxide,
- 0,5 % or less of bromide,
- 0,4 % or less of tributylamine,
- 0,3 % or less of carbonate and
- 0,2 % or less of potassium and sodium taken together
| 0 | 1.1.2006 to 31.12.2008 |
| ex29239000 | 70 | Tetrapropylammonium hydroxide, in the form of an aqueous solution containing:- (40 ± 2) % by weight of tetrapropylammonium hydroxide,
- 0,3 % by weight or less of carbonate,
- 0,1 % by weight or less of tripropylamine,
- 500 mg/kg or less of bromide and
- 25 mg/kg or less of potassium and sodium taken together
| 0 | 1.1.2006 to 31.12.2008 |
| ex29239000 | 80 | Diallyldimethylammonium chloride, in the form of an aqueous solution containing by weight 63 % or more but not more than 67 % of diallyldimethylammonium chloride | 0 | 1.1.2006 to 31.12.2008 |
| ex29241900 | 10 | 2-Acrylamido-2-methylpropanesulfonic acid and its sodium or ammonium salts | 0 | 1.1.2006 to 31.12.2008 |
| ex29241900 | 20 | N, N'-Methylenediacrylamide | 0 | 1.1.2006 to 31.12.2008 |
| ex29241900 | 30 | Methyl 2-acetamido-3-chloropropionate | 0 | 1.1.2006 to 31.12.2008 |
| ex29241900 | 40 | N-(1,1-Dimethyl-3-oxobutyl)acrylamide | 0 | 1.1.2006 to 31.12.2008 |
| ex29241900 | 50 | Acrylamide | 0 | 1.1.2006 to 31.12.2008 |
| ex29242190ex38249099 | 1062 | 4,4'-Dihydroxy-7,7'-ureylenedi(naphthalene-2-sulfonic acid) and its sodium salts | 0 | 1.1.2006 to 31.12.2008 |
| ex29242995 | 10 | Alachlor (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29242995 | 15 | Acetochlor (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29242995 | 20 | 3'-Amino-4'-methoxyacetanilide | 0 | 1.1.2006 to 31.12.2008 |
| ex29242995 | 25 | 3'-Diethylaminoacetanilide | 0 | 1.1.2006 to 31.12.2008 |
| ex29242995 | 30 | Propachlor (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29242995 | 35 | Diethofencarb (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29242995 | 40 | 7-Acetamido-4-hydroxynaphthalene-2-sulfonic acid and its sodium salts | 0 | 1.1.2006 to 31.12.2008 |
| ex29242995 | 45 | 3'-Diethylamino-4'-methoxyacetanilide | 0 | 1.1.2006 to 31.12.2008 |
| ex29242995 | 50 | 5-[N-(2-Acetoxyethyl)acetoxyacetamido]-N, N'-bis(2,3-diacetoxy= propyl)-2,4,6-triiodoisophthalamide | 0 | 1.1.2006 to 31.12.2008 |
| ex29242995 | 55 | 4'-Amino-N-methylacetanilide | 0 | 1.1.2006 to 31.12.2008 |
| ex29242995 | 60 | Beflubutamid (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29242995 | 65 | 2-(4-Hydroxyphenyl)acetamide | 0 | 1.1.2006 to 31.12.2008 |
| ex29242995 | 70 | 4-Acetamido-2-aminobenzenesulfonic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex29242995 | 75 | 3-Amino-p-anisanilide | 0 | 1.1.2006 to 31.12.2008 |
| ex29242995 | 80 | 5'-Chloro-3-hydroxy-2',4'-dimethoxy-2-naphtanilide | 0 | 1.1.2006 to 31.12.2008 |
| ex29242995 | 85 | p-Aminobenzamide | 0 | 1.1.2006 to 31.12.2008 |
| ex29242995 | 91 | 3-Hydroxy-2'-methoxy-2-naphthanilide | 0 | 1.1.2006 to 31.12.2008 |
| ex29242995 | 92 | 3-Hydroxy-2-naphthanilide | 0 | 1.1.2006 to 31.12.2008 |
| ex29242995 | 93 | 3-Hydroxy-2'-methyl-2-naphthanilide | 0 | 1.1.2006 to 31.12.2008 |
| ex29242995 | 94 | 2'-Ethoxy-3-hydroxy-2-naphthanilide | 0 | 1.1.2006 to 31.12.2008 |
| ex29242995 | 95 | N-{3-[3-(Dimethylamino)prop-2-enoyl]phenyl}-N-ethylacetamide | 0 | 1.1.2006 to 31.12.2008 |
| ex29242995 | 96 | 4'-Chloro-3-hydroxy-2',5'-dimethoxy-2-naphthanilide | 0 | 1.1.2006 to 31.12.2008 |
| ex29242995 | 97 | 1,1-Cyclohexanediacetic acid monoamide | 0 | 1.1.2006 to 31.12.2008 |
| ex29251100 | 20 | Saccharin and its sodium salt | 0 | 1.1.2006 to 31.12.2008 |
| ex29251995 | 10 | N-Phenylmaleimide | 0 | 1.1.2006 to 31.12.2008 |
| ex29251995 | 20 | N-(9-Fluorenylmethoxycarbonyloxy)succinimide | 0 | 1.1.2006 to 31.12.2008 |
| ex29252000 | 10 | Dicyclohexylcarbodiimide | 0 | 1.1.2006 to 31.12.2008 |
| ex29269095 | 10 | Methacrylonitrile | 0 | 1.1.2006 to 31.12.2008 |
| ex29269095 | 15 | Cyano(3-phenoxyphenyl)methyl 3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylate | 0 | 1.1.2006 to 31.12.2008 |
| ex29269095 | 20 | 2-(m-Benzoylphenyl)propiononitrile | 0 | 1.1.2006 to 31.12.2008 |
| ex29269095 | 25 | Aminoacetonitrile hydrochloride | 0 | 1.1.2006 to 31.12.2008 |
| ex29269095 | 30 | 2-Amino-5-nitrobenzonitrile | 0 | 1.1.2006 to 31.12.2008 |
| ex29269095 | 35 | 2-Bromo-2(bromomethyl)pentanedinitrile | 0 | 1.1.2006 to 31.12.2008 |
| ex29269095 | 45 | 2-Cyanoacetamide | 0 | 1.1.2006 to 31.12.2008 |
| ex29269095 | 50 | Alkyl or alkoxyalkyl esters of cyanoacetic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex29269095 | 60 | Cyanoacetic acid in crystalline form | 0 | 1.1.2006 to 31.12.2008 |
| ex29269095 | 65 | Malononitrile | 0 | 1.1.2006 to 31.12.2008 |
| ex29269095 | 70 | Tetrachloroterephthalonitrile | 0 | 1.1.2006 to 31.12.2008 |
| ex29269095 | 75 | Ethyl 2-cyano-2-ethyl-3-methylhexanoate | 0 | 1.1.2006 to 31.12.2008 |
| ex29269095 | 80 | Ethyl 2-cyano-2-phenylbutyrate | 0 | 1.1.2006 to 31.12.2008 |
| ex29269095 | 85 | Ethyl 2-allyl-2-cyano-3-methylhexanoate | 0 | 1.1.2006 to 31.12.2008 |
| ex29269095 | 86 | Ethylenediaminetetraacetonitrile | 0 | 1.1.2006 to 31.12.2008 |
| ex29269095 | 87 | Nitrilotriacetonitrile | 0 | 1.1.2006 to 31.12.2008 |
| ex29269095 | 88 | 1,3-Propylenediaminetetraacetonitrile | 0 | 1.1.2006 to 31.12.2008 |
| ex29269095 | 89 | Butyronitrile | 0 | 1.1.2006 to 31.12.2008 |
| ex29270000 | 10 | 2,2'-Dimethyl-2,2'-azodipropionamidine dihydrochloride | 0 | 1.1.2006 to 31.12.2008 |
| ex29270000 | 20 | 4-Anilino-2-methoxybenzenediazonium hydrogen sulfate | 0 | 1.1.2006 to 31.12.2008 |
| ex29270000ex38249099 | 3069 | 4'-Aminoazobenzene-4-sulfonic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex29270000 | 40 | 2-Hydroxynaphthalene-1-diazonium-4-sulfonate | 0 | 1.1.2006 to 31.12.2008 |
| ex29270000ex38249099 | 5041 | 2-Hydroxy-6-nitronaphthalene-1-diazonium-4-sulfonate, of a purity by weight of 60 % or more | 0 | 1.1.2006 to 31.12.2008 |
| ex29280090 | 10 | 3,3'-Bis(3,5-di-tert-butyl-4-hydroxyphenyl)-N, N'-bipropionamide | 0 | 1.1.2006 to 31.12.2008 |
| ex29280090 | 20 | 2,4,6-Trichlorophenylhydrazine | 0 | 1.1.2006 to 31.12.2008 |
| ex29280090 | 40 | O-Ethylhydroxylamine, in the form of an aqueous solution | 0 | 1.1.2006 to 31.12.2008 |
| ex29280090 | 50 | N-Isopropylhydroxylamine, in the form of an aqueous solution | 0 | 1.1.2006 to 31.12.2008 |
| ex29280090 | 60 | Adipohydrazide | 0 | 1.1.2006 to 31.12.2008 |
| ex29280090 | 70 | Tetrakis(4-methylpentan-2-oximino)silane | 0 | 1.1.2006 to 31.12.2008 |
| ex29280090 | 80 | Cyflufenamid (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29291090 | 10 | Methylenedicyclohexyl diisocyanates | 0 | 1.1.2006 to 31.12.2008 |
| ex29291090 | 30 | 3,3'-Dimethylbiphenyl-4,4'-diyl diisocyanate | 0 | 1.1.2006 to 31.12.2008 |
| ex29291090 | 40 | m-Isopropenyl-α, α-dimethylbenzyl isocyanate | 0 | 1.1.2006 to 31.12.2008 |
| ex29291090 | 50 | m-Phenylenediisopropylidene diisocyanate | 0 | 1.1.2006 to 31.12.2008 |
| ex29291090 | 60 | Trimethylhexamethylene diisocyanate, mixed isomers | 0 | 1.1.2006 to 31.12.2008 |
| ex29291090 | 70 | 9,9'-(3-Heptyl-4-pentylcyclohex-1,2-ylene)dinonyl diisocyanate | 0 | 1.1.2006 to 31.12.2008 |
| ex29299000 | 20 | Ethyl isocyanoacetate | 0 | 1.1.2006 to 31.12.2008 |
| ex29309070 | 10 | Thiophenol | 0 | 1.1.2006 to 31.12.2008 |
| ex29309070 | 15 | Ethoprophos (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29309070 | 20 | 3,3-Dimethyl-1-methylthiobutanone oxime | 0 | 1.1.2006 to 31.12.2008 |
| ex29309070 | 25 | Thiophanate-methyl (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29309070 | 30 | 4-(4-Isopropoxyphenylsulfonyl)phenol | 0 | 1.1.2006 to 31.12.2008 |
| ex29309070 | 40 | 3,3'-Thiodi(propionic acid) | 0 | 1.1.2006 to 31.12.2008 |
| ex29309070 | 45 | 2-[(p-Aminophenyl)sulfonyl]ethyl hydrogen sulfate | 0 | 1.1.2006 to 31.12.2008 |
| ex29309070ex38249099 | 5051 | 2-Chlorophenylsulfonyl isocyanate, in the form of a solution in xylene | 0 | 1.1.2006 to 31.12.2008 |
| ex29309070ex38249099 | 5552 | Methyl 2-(isocyanatosulfonyl)methylbenzoate, in the form of a solution in xylene | 0 | 1.1.2006 to 31.12.2008 |
| ex29309070 | 60 | Methyl phenyl sulfide | 0 | 1.1.2006 to 31.12.2008 |
| ex29309070 | 65 | Diiodomethyl p-tolyl sulfone | 0 | 1.1.2006 to 31.12.2008 |
| ex29309070ex38249099 | 7071 | 2-Aminophenyl phenyl sulfone, of a purity by weight of 75 % or more | 0 | 1.1.2006 to 31.12.2008 |
| ex29309070 | 75 | 4,4'-[Methylenebis(oxyethylenethio)]diphenol | 0 | 1.1.2006 to 31.12.2008 |
| ex29309070 | 80 | Captan (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29309070 | 85 | Mesotrione (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29309070 | 86 | 4-Hydroxybenzenethiol | 0 | 1.1.2006 to 31.12.2008 |
| ex29309070 | 87 | 3-Sulfinobenzoic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex29309070 | 88 | Methylene dithiocyanate | 0 | 1.1.2006 to 31.12.2008 |
| 29310010 | | Dimethyl methylphosphonate | 0 | 1.1.2006 to 31.12.2008 |
| ex29310095 | 05 | Butylethylmagnesium, in the form of a solution in heptane | 0 | 1.1.2006 to 31.12.2008 |
| ex29310095 | 10 | 2-Diphenylphosphinobenzoic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex29310095 | 20 | Bis(2-chloroethyl) 2-chloroethylphosphonate | 0 | 1.1.2006 to 31.12.2008 |
| ex29310095 | 25 | Sodium phenylphosphinate | 0 | 1.1.2006 to 31.12.2008 |
| ex29310095 | 30 | Bis(2-chloroethyl) vinylphosphonate | 0 | 1.1.2006 to 31.12.2008 |
| ex29310095 | 35 | Sodium tetraphenylborate | 0 | 1.1.2006 to 31.12.2008 |
| ex29310095 | 40 | N-(Phosphonomethyl)iminodiacetic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex29310095 | 45 | Tributylphosphine | 0 | 1.1.2006 to 31.12.2008 |
| ex29310095 | 50 | Bis(2,4,4-trimethylpentyl)phosphinic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex29310095 | 55 | Dimethyl[dimethylsilyldiindenyl]hafnium | 0 | 1.1.2006 to 31.12.2008 |
| ex29310095 | 60 | Trioctylphosphine oxide | 0 | 1.1.2006 to 31.12.2008 |
| ex29310095 | 65 | Triethylborane | 0 | 1.1.2006 to 31.12.2008 |
| ex29310095 | 70 | N, N-Dimethylanilinium tetrakis(pentafluorophenyl)borate | 0 | 1.1.2006 to 31.12.2008 |
| ex29310095 | 75 | {2,7-Di-tert-butyl-9-[(η5-cyclopentadienyl)bis(4-triethyl= silylphenyl)methyl]-4a,4b,8a,9,9a-η-fluorene}dimethylhafnium, in the form of a solution in hexane | 0 | 1.1.2006 to 31.12.2008 |
| ex29310095 | 84 | Methylbis(4-methylpentan-2-oximino)vinylsilane | 0 | 1.1.2006 to 31.12.2008 |
| ex29310095 | 85 | Tributyl(tetradecyl)phosphonium chloride, whether or not in the form of an aqueous solution | 0 | 1.1.2006 to 31.12.2008 |
| ex29310095 | 86 | Mixture of the isomers 9-icosyl-9-phosphabicyclo[3.3.1]nonane and 9-icosyl-9-phosphabicyclo[4.2.1]nonane | 0 | 1.1.2006 to 31.12.2008 |
| ex29310095 | 87 | Tris(4-methylpentan-2-oximino)methylsilane | 0 | 1.1.2006 to 31.12.2008 |
| ex29310095 | 88 | Tris(4-methylpentan-2-oximino)vinylsilane | 0 | 1.1.2006 to 31.12.2008 |
| ex29310095 | 89 | Tetrabutylphosphonium acetate, in the form of an aqueous solution | 0 | 1.1.2006 to 31.12.2008 |
| ex29310095 | 95 | Trichloro(3-chloropropyl)silane | 0 | 1.1.2006 to 31.12.2008 |
| ex29321300 | 10 | Tetrahydrofurfuryl alcohol | 0 | 1.1.2006 to 31.12.2008 |
| ex29321900 | 40 | Furan of a purity by weight of 99 % or more | 0 | 1.1.2006 to 31.12.2008 |
| ex29321900 | 50 | 2,3-Dihydrofuran | 0 | 1.1.2006 to 31.12.2008 |
| ex29321900 | 70 | Furfurylamine | 0 | 1.1.2006 to 31.12.2008 |
| ex29321900 | 75 | Tetrahydro-2-methylfuran | 0 | 1.1.2006 to 31.12.2008 |
| ex29321900 | 80 | Octafluorotetrahydrofuran | 0 | 1.1.2006 to 31.12.2008 |
| ex29322985 | 10 | 2'-Anilino-6'-[ethyl(isopentyl)amino]-3'-methylspiro[isobenzofuran= -1(3H),9'-xanthen]-3-one | 0 | 1.1.2006 to 31.12.2008 |
| ex29322985 | 15 | 13,14,15,16-Tetranorlabdano-12,8α-lactone | 0 | 1.1.2006 to 31.12.2008 |
| ex29322985 | 25 | 2'-(2-Chloroanilino)-6'-dibutylaminospiro[isobenzofuran= -1(3H),9'-xanthen]-3-one | 0 | 1.1.2006 to 31.12.2008 |
| ex29322985 | 30 | 2'-Anilino-3'-methyl-6'-methyl(propyl)aminospiro[isobenzofuran= -1(3H),9'-xanthen]-3-one | 0 | 1.1.2006 to 31.12.2008 |
| ex29322985 | 35 | 6'-Diethylamino-3'-methyl-2'-(2,4-xylidino)spiro[isobenzofuran= -1(3H),9'-xanthen]-3-one | 0 | 1.1.2006 to 31.12.2008 |
| ex29322985 | 40 | 2'-Anilino-6'-(N-ethyl-p-toluidino)-3'-methylspiro[isobenzofuran= -1(3H),9'-xanthen]-3-one | 0 | 1.1.2006 to 31.12.2008 |
| ex29322985 | 45 | 2'-Anilino-6'-ethyl(isobutyl)amino-3'-methylspiro[isobenzofuran= -1(3H),9'-xanthen]-3-one | 0 | 1.1.2006 to 31.12.2008 |
| ex29322985 | 50 | 2'-Anilino-6'-cyclohexyl(methyl)amino-3'-methylspiro[isobenzofuran= -1(3H),9'-xanthen]-3-one | 0 | 1.1.2006 to 31.12.2008 |
| ex29322985 | 55 | 6-Dimethylamino-3,3-bis(4-dimethylaminophenyl)phthalide | 0 | 1.1.2006 to 31.12.2008 |
| ex29322985 | 70 | 3',6'-Bis(ethylamino)-2',7'-dimethylspiro[isobenzofuran-1(3H),9'-= [9H]-xanthen]-3-one | 0 | 1.1.2006 to 31.12.2008 |
| ex29322985 | 75 | Rofecoxib (INN) | 0 | 1.1.2006 to 31.12.2008 |
| ex29329970 | 10 | Bendiocarb (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29329970 | 20 | Androsta-1,4-diene-3,17-dione 17-(2,2-dimethylpropylene) acetal | 0 | 1.1.2006 to 31.12.2008 |
| ex29329970 | 40 | 1,3:2,4-Bis-O-(3,4-dimethylbenzylidene)-D-glucitol | 0 | 1.1.2006 to 31.12.2008 |
| ex29329970 | 50 | 5-Propyl-1,3-benzodioxole | 0 | 1.1.2006 to 31.12.2008 |
| ex29329970 | 60 | Calcium bis[4-O-(β-D-galactopyranosyl)-D-gluconate] dihydrate | 0 | 1.1.2006 to 31.12.2008 |
| ex29329985 | 20 | (2-Butylbenzofuran-3-yl) (4-hydroxy-3,5-diiodophenyl) ketone | 0 | 1.1.2006 to 31.12.2008 |
| ex29329985 | 30 | Carbofuran (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29331990 | 10 | 4,5-Diamino-l-(2-hydroxyethyl)-1H-pyrazole sulfate | 0 | 1.1.2006 to 31.12.2008 |
| ex29331990 | 20 | 4-Amino-1-methyl-3-propylpyrazole-5-carboxamide | 0 | 1.1.2006 to 31.12.2008 |
| ex29331990 | 30 | 3-Methyl-1-p-tolyl-5-pyrazolone | 0 | 1.1.2006 to 31.12.2008 |
| ex29331990 | 40 | Edaravone (INN) | 0 | 1.1.2006 to 31.12.2008 |
| ex29332100 | 10 | Hydantoin | 0 | 1.1.2006 to 31.12.2008 |
| ex29332100 | 20 | 2-(3-Benzyl-2,5-dioxoimidazolidin-1-yl)-2'-chloro-5'-(3-dodecyl= sulfonyl-2-methylpropionamido)-4,4-dimethyl-3-oxovaleranilide | 0 | 1.1.2006 to 31.12.2008 |
| ex29332100 | 40 | 1-[1,3-Bis(hydroxymethyl)-2,5-dioxoimidazolidin-4-yl]= -1,3-bis(hydroxymethyl)urea | 0 | 1.1.2006 to 31.12.2008 |
| ex29332990 | 20 | Reaction product consisting of the methyl esters of (±)-6-(4-isopropyl-4-methyl-5-oxo-2-imidazolin-2-yl)-m-toluic acid and (±)-2-(4-isopropyl-4-methyl-5-oxo-2-imidazolin-2-yl)-p-toluic acid (Imazamethabenz-methyl) | 4 | 1.1.2006 to 31.12.2008 |
| ex29332990 | 40 | Triflumizole (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29332990 | 50 | 1,3-Dimethylimidazolidin-2-one | 0 | 1.1.2006 to 31.12.2008 |
| ex29333999 | 10 | Cloperastine fendizoate (INNM) | 0 | 1.1.2006 to 31.12.2008 |
| ex29333999 | 15 | Pyridine-2,3-dicarboxylic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex29333999 | 20 | 5-Methyl-2-pyridylamine | 0 | 1.1.2006 to 31.12.2008 |
| ex29333999 | 25 | Imazethapyr (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29333999 | 30 | 4,4'-Trimethylenedipiperidine | 0 | 1.1.2006 to 31.12.2008 |
| ex29333999 | 35 | Aminopyralid (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29333999 | 40 | 2-Chloropyridine | 0 | 1.1.2006 to 31.12.2008 |
| ex29333999 | 45 | 3-(Carboxymethyl)pyridinium chloride | 0 | 1.1.2006 to 31.12.2008 |
| ex29333999 | 60 | 2-Fluoro-6-(trifluoromethyl)pyridine | 0 | 1.1.2006 to 31.12.2008 |
| ex29333999 | 65 | Acetamiprid (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29333999 | 70 | Etoricoxib (INN) | 0 | 1.1.2006 to 31.12.2008 |
| ex29333999 | 75 | Picolinafen (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29334910 | 10 | Quinmerac (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29334990 | 20 | 5,7-Dichloro-4-(4-fluorophenoxy)quinoline | 0 | 1.1.2006 to 31.12.2008 |
| ex29334990 | 40 | N-Ethyl-5,6,7,8-tetrahydroquinolinium p-toluenesulfonate, in the form of a solution in water | 0 | 1.1.2006 to 31.12.2008 |
| ex29334990 | 50 | Methyl 2-[(S)-3-{(E)-3-[2-(7-chloro-2-quinolyl)vinyl]phenyl}-3-hydroxypropyl]= benzoate monohydrate | 0 | 1.1.2006 to 31.12.2008 |
| ex29334990 | 60 | 5,6,7,8-Tetrahydroquinoline | 0 | 1.1.2006 to 31.12.2008 |
| ex29334990 | 70 | Quinolin-8-ol | 0 | 1.1.2006 to 31.12.2008 |
| ex29335995 | 10 | 1-Ethyl-6-fluoro-1,4-dihydro-4-oxo-7-piperazin-1-yl-1,8-naphthyridine= - 3-carboxylic acid and its salts and esters | 0 | 1.1.2006 to 31.12.2008 |
| ex29335995 | 15 | (2R)-4-Oxo-4-[3-(trifluoromethyl)-5,6-dihydro[1,2,4]triazolo[4,3-a]= pyrazin-7(8H)-yl]-1-(2,4,5-trifluorophenyl)butyl-2-ammonium phosphate monohydrate | 0 | 1.1.2006 to 31.12.2008 |
| ex29335995 | 20 | 2,4-Diamino-6-chloropyrimidine | 0 | 1.1.2006 to 31.12.2008 |
| ex29335995 | 25 | 2,5-Diamino-4,6-dihydroxypyrimidine monohydrochloride monohydrate | 0 | 1.1.2006 to 31.12.2008 |
| ex29335995 | 30 | Mepanipyrim (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29335995 | 40 | Guanine | 0 | 1.1.2006 to 31.12.2008 |
| ex29335995 | 50 | 1-Chloromethyl-4-fluoro-1,4-diazoniabicyclo[2.2.2]octane bis(tetrafluoroborate) | 0 | 1.1.2006 to 31.12.2008 |
| ex29335995 | 60 | 2,6-Dichloro-4,8-dipiperidinopyrimido[5,4-d]pyrimidine | 0 | 1.1.2006 to 31.12.2008 |
| ex29335995 | 70 | N-(4-Ethyl-2,3-dioxopiperazin-1-ylcarbonyl)-D-2-phenylglycine | 0 | 1.1.2006 to 31.12.2008 |
| ex29335995 | 80 | N-(4-Ethyl-2,3-dioxopiperazin-1-ylcarbonyl)-D-2-(4-hydroxyphenyl)glycine | 0 | 1.1.2006 to 31.12.2008 |
| ex29335995 | 85 | Adenine | 0 | 1.1.2006 to 31.12.2008 |
| ex29336980 | 20 | 1,3,5-Tris[(3,5-di-tert-butyl-4-hydroxyphenyl)methyl]-1,3,5-triazine= - 2,4,6(1H,3H,5H)-trione | 0 | 1.1.2006 to 31.12.2008 |
| ex29336980 | 40 | Cyanazine (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29336980 | 50 | 1,3,5-Tris(2,3-dibromopropyl)-1,3,5-triazinane-2,4,6-trione | 0 | 1.1.2006 to 31.12.2008 |
| ex29336980 | 60 | Hexazinone (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29336980 | 80 | Tris(2-hydroxyethyl)-1,3,5-triazinetrione | 0 | 1.1.2006 to 31.12.2008 |
| ex29337900 | 10 | Ezetimibe (INN) | 0 | 1.1.2006 to 31.12.2008 |
| ex29339930 | 10 | Azepane, for the manufacture of goods of subheading 380830 | 0 | 1.1.2006 to 31.12.2008 |
| ex29339930 | 20 | 5H-Dibenz[b, f]azepine-5-carbonyl chloride | 0 | 1.1.2006 to 31.12.2008 |
| ex29339990 | 10 | 2-(2H-Benzotriazol-2-yl)-4,6-di-tert-butylphenol | 0 | 1.1.2006 to 31.12.2008 |
| ex29339990 | 15 | 2-(2H-Benzotriazol-2-yl)-4,6-di-tert-pentylphenol | 0 | 1.1.2006 to 31.12.2008 |
| ex29339990 | 20 | 2-(2H-Benzotriazol-2-yl)-4,6-bis(1-methyl-1-phenylethyl)phenol | 0 | 1.1.2006 to 31.12.2008 |
| ex29339990 | 25 | 6,6'-Di-2H-benzotriazol-2-yl-4,4'-bis(1,1,3,3-tetramethylbutyl)= -2,2'-methylenediphenol | 0 | 1.1.2006 to 31.12.2008 |
| ex29339990 | 30 | Quizalofop-P-ethyl (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29339990 | 35 | Indoline | 0 | 1.1.2006 to 31.12.2008 |
| ex29339990 | 40 | trans-4-Hydroxy-L-proline | 0 | 1.1.2006 to 31.12.2008 |
| ex29339990 | 45 | Maleic hydrazide (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29339990 | 50 | Metconazole (ISO) | 3.2 | 1.1.2006 to 31.12.2008 |
| ex29339990 | 55 | 5-Nitroindole | 0 | 1.1.2006 to 31.12.2008 |
| ex29339990 | 60 | 1,3-Bis(3-isocyanatomethylphenyl)-1,3-diazetidine-2,4-dione (dimeric 2,4-toluene diisocyanate) | 0 | 1.1.2006 to 31.12.2008 |
| ex29339990 | 65 | Candesartan cilexetil (INNM) | 0 | 1.1.2006 to 31.12.2008 |
| ex29339990 | 70 | 6,7-Dihydro-5H-cyclopenta[b]pyridine | 0 | 1.1.2006 to 31.12.2008 |
| ex29339990 | 75 | 2,3-Dichloropyrazine | 0 | 1.1.2006 to 31.12.2008 |
| ex29339990 | 80 | 1-Methyltetrazole-5-thiol | 0 | 1.1.2006 to 31.12.2008 |
| ex29339990 | 86 | Pyridaben (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29339990 | 87 | Pyridate (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29339990 | 88 | 2,6-dichloroquinoxaline | 0 | 1.1.2006 to 31.12.2008 |
| ex29339990 | 89 | Carbendazim (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29341000 | 10 | Hexythiazox (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29341000 | 20 | 2-(4-Methylthiazol-5-yl)ethanol | 0 | 1.1.2006 to 31.12.2008 |
| ex29341000 | 30 | 5-[(2,4-Dioxo-5-thiazolidinyl)methyl]-2-methoxy-N-{[4-(trifluoromethyl)phenyl]= methyl}benzamide | 0 | 1.1.2006 to 31.12.2008 |
| ex29342080 | 10 | 4-Chloro-1,3-benzothiazol-2(3H)-one | 0 | 1.1.2006 to 31.12.2008 |
| ex29342080 | 20 | S-(1,3-Benzothiazol-2-yl) (Z)-2-(2-aminothiazol-4-yl)-2-(methoxyimino)thioacetate | 0 | 1.1.2006 to 31.12.2008 |
| ex29342080 | 30 | Benthiavalicarb-isopropyl (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29349990 | 10 | 7-Chloro-5-methyl-2H-1,4-benzothiazin-3-(4H)-one | 0 | 1.1.2006 to 31.12.2008 |
| ex29349990 | 15 | Carboxin (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29349990 | 20 | 4-[4-(Tridecyl[branched]oxy)phenyl]-1,4-thiazinane 1,1-dioxide | 0 | 1.1.2006 to 31.12.2008 |
| ex29349990 | 25 | Oxycarboxin (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29349990 | 30 | Etridiazole (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29349990 | 35 | Dimethenamide (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29349990 | 40 | 2,3,5,6-Tetrahydroxy-1,4-diisobutyl-1,4-dioxo-1,4-diphosphinane | 0 | 1.1.2006 to 31.12.2008 |
| ex29349990 | 45 | Tris(2,3-epoxypropyl)-1,3,5-triazinanetrione | 0 | 1.1.2006 to 31.12.2008 |
| ex29349990 | 50 | 1-[2-(1,3-Dioxan-2-yl)ethyl]-2-ethylpyridinium bromide | 0 | 1.1.2006 to 31.12.2008 |
| ex29349990 | 55 | Olmesartan medoxomil (INN) | 0 | 1.1.2006 to 31.12.2008 |
| ex29349990 | 60 | DL-Homocysteine thiolactone hydrochloride | 0 | 1.1.2006 to 31.12.2008 |
| ex29349990 | 65 | Methyl 3-aminothiophene-2-carboxylate | 0 | 1.1.2006 to 31.12.2008 |
| ex29349990 | 72 | 1-[3-(5-Nitro-2-furyl)allylideneamino]imidazolidine-2,4-dione | 0 | 1.1.2006 to 31.12.2008 |
| ex29349990 | 73 | N-(5-Mercapto-1,3,4-thiadiazol-2-yl)acetamide | 0 | 1.1.2006 to 31.12.2008 |
| ex29349990 | 80 | Oblimersen sodium (INNM) | 0 | 1.1.2006 to 31.12.2008 |
| ex29350090 | 10 | Salts of sulfathiazole (INN) | 0 | 1.1.2006 to 31.12.2008 |
| ex29350090 | 15 | Flupyrsulfuron-methyl-sodium (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29350090 | 20 | Toluenesulfonamides | 0 | 1.1.2006 to 31.12.2008 |
| ex29350090 | 25 | Triflusulfuron-methyl (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29350090 | 30 | Mixture of isomers consisting of N-ethyltoluene-2-sulfonamide and N-ethyltoluene-4-sulfonamide | 0 | 1.1.2006 to 31.12.2008 |
| ex29350090 | 35 | Chlorsulfuron (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29350090 | 40 | 1-(4,6-Dimethoxypyrimidin-2-yl)-3-(2-ethylsulfonylimidazo[1,2-a]pyridin= -3-ylsulfonyl)urea (sulfosulfuron) | 0 | 1.1.2006 to 31.12.2008 |
| ex29350090 | 45 | Rimsulfuron (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29350090 | 50 | 4,4'-Oxydi(benzenesulfonohydrazide) | 0 | 1.1.2006 to 31.12.2008 |
| ex29350090 | 55 | Thifensulfuron-methyl (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29350090 | 60 | 5-Amino-N-(2,6-dichloro-m-tolyl)-1H-1,2,4-triazole-3-sulfonamide | 0 | 1.1.2006 to 31.12.2008 |
| ex29350090 | 65 | Tribenuron-methyl (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29350090 | 70 | Methyl 3-aminosulfonylthiophene-2-carboxylate | 0 | 1.1.2006 to 31.12.2008 |
| ex29350090 | 75 | Metsulfuron-methyl (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex29350090 | 80 | N-(3-Amino-2-hydroxy-4-phenylbutyl)-N-(2-methylpropyl)-4-amino= benzenesulfonamide | 0 | 1.1.2006 to 31.12.2008 |
| ex29350090 | 85 | N-[4-(Isopropylaminoacetyl)phenyl]methanesulfonamide hydrochloride | 0 | 1.1.2006 to 31.12.2008 |
| ex29350090 | 86 | 4-(m-Tolylamino)pyridine-3-sulfonamide | 0 | 1.1.2006 to 31.12.2008 |
| ex29350090 | 87 | 4'-Sulfamoylacetanilide | 0 | 1.1.2006 to 31.12.2008 |
| ex29350090 | 88 | N-(2-(4-amino-N-ethyl-m-toluidino)ethyl)methanesulfonamide sesquisulfate monohydrate | 0 | 1.1.2006 to 31.12.2008 |
| ex29389090 | 10 | Hesperidin | 0 | 1.1.2006 to 31.12.2008 |
| 32012000 | | Wattle extract | 0 | 1.1.2006 to 31.12.2008 |
| ex32019090 | 10 | Tanning extracts of eucalyptus | 3.2 | 1.1.2006 to 31.12.2008 |
| ex32019090 | 20 | Tanning extracts derived from gambier and myrobalan fruits | 0 | 1.1.2006 to 31.12.2008 |
| ex32041500 | 10 | Dye CI vat orange 7 | 0 | 1.1.2006 to 31.12.2008 |
| ex32041500 | 20 | Dye CI vat red 15 | 0 | 1.1.2006 to 31.12.2008 |
| ex32041500 | 30 | Dye CI vat red 14 | 0 | 1.1.2006 to 31.12.2008 |
| ex32041500 | 40 | Dye CI vat brown 57 | 0 | 1.1.2006 to 31.12.2008 |
| ex32041500 | 50 | Dye CI vat blue 47 | 0 | 1.1.2006 to 31.12.2008 |
| ex32041700 | 10 | Dye CI pigment yellow 81 | 0 | 1.1.2006 to 31.12.2008 |
| ex32041900 | 10 | Nickel bis{4-methoxy-2-[6-(pentafluoroethylthio)benzothiazol-2-ylazo]= -5-(dipropylamino)benzenesulfonate} | 0 | 1.1.2006 to 31.12.2008 |
| ex32041900 | 15 | 4-{4-[3-(4-Methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo= [h]indeno[2,1-f]chromen-3-yl]phenyl}morpholine | 0 | 1.1.2006 to 31.12.2008 |
| ex32041900 | 20 | 13-Ethyl-3-[4-(morpholino)phenyl]-3-phenyl-3,13-dihydrobenzo= [h]indeno[2,1-f]chromen-13-ol | 0 | 1.1.2006 to 31.12.2008 |
| ex32041900 | 25 | Cyclohexyl 8-methyl-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate | 0 | 1.1.2006 to 31.12.2008 |
| ex32041900 | 30 | 13-Isopropyl-3,3-bis(4-methoxyphenyl)-6,11-dimethyl-3,13-dihydrobenzo= [h]indeno[2,1-f]chromen-13-ol | 0 | 1.1.2006 to 31.12.2008 |
| ex32041900 | 35 | 13-Butyl-13-ethoxy-6,11-dimethoxy-3,3-bis(4-methoxyphenyl)-3,13-dihydrobenzo= [h]indeno[2,1-f]chromene | 0 | 1.1.2006 to 31.12.2008 |
| ex32041900 | 40 | Methyl 8'-acetoxy-1,3,3,5,6-pentamethyl-2,3-dihydrospiro[1H-indole= - 2,3'-naphtho[2,1-b][1,4]oxazine]-9'-carboxylate | 0 | 1.1.2006 to 31.12.2008 |
| ex32041900 | 45 | 6,7-Dimethoxy-3,3-bis(4-methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo= [h]indeno[2,1-f]chromene | 0 | 1.1.2006 to 31.12.2008 |
| ex32041900 | 50 | Methyl 6-(isobutyryloxy)-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate | 0 | 1.1.2006 to 31.12.2008 |
| ex32041900 | 60 | Ethoxycarbonylmethyl 8-methyl-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate | 0 | 1.1.2006 to 31.12.2008 |
| ex32041900 | 65 | 6-Methoxy-7-morpholino-13-ethyl-13-methoxy-3,3-bis-(4-methoxyphenyl)-3,13-dihydrobenzo[h]indeno[2,1-f]chromene | 0 | 1.1.2006 to 31.12.2008 |
| ex32041900 | 70 | Dye CI solvent red 49 | 0 | 1.1.2006 to 31.12.2008 |
| ex32041900 | 75 | 6,7-Dimethoxy-13-ethyl-13-methoxy-3,3-bis-(4-methoxyphenyl)-3,13-dihydrobenzo[h]indeno[2,1-f]chromene | 0 | 1.1.2006 to 31.12.2008 |
| ex32041900 | 80 | ((R) and (S) isomers of 6,7-Dimethoxy-13-ethyl-13-[2-(2-methoxyethoxy)-ethoxy]-3-(4-methoxyphenyl)-3-(4-fluorophenyl)-3,13-dihydrobenzo[h]indeno[2,1-f]chromene | 0 | 1.1.2006 to 31.12.2008 |
| ex32050000 | 10 | Aluminium lakes prepared from dyes for use in the manufacture of pigments for the pharmaceutical industry | 0 | 1.1.2006 to 31.12.2008 |
| ex32061100 | 10 | Titanium dioxide coated with isopropoxytitanium triisostearate, containing by weight 1,5 % or more but not more than 2,5 % of isopropoxytitanium triisostearate | 0 | 1.1.2006 to 31.12.2008 |
| ex32061900 | 10 | Preparation based on titanium dioxide, containing by weight 66 % or more but not more than 71 % of titanium dioxide and 1 % or more but not more than 2 % of isopropoxytitanium triisostearate | 0 | 1.1.2006 to 31.12.2008 |
| ex32064200 | 10 | Lithopone | 0 | 1.1.2006 to 31.12.2008 |
| ex32064990 | 10 | Black preparation of iron-oxide pigments, in liquid form, with a maximum particle size not exceeding 20 nanometres and containing by weight 25 % or more of iron evaluated as Fe2O3, for the manufacture of goods of heading 3304 or 9608 | 0 | 1.1.2006 to 31.12.2008 |
| 32065000 | | Inorganic products of a kind used as luminophores | 0 | 1.1.2006 to 31.12.2008 |
| ex32074080 | 20 | Glass flakes coated with silver, of an average diameter of 40 (± 10) μm | 0 | 1.1.2006 to 31.12.2008 |
| ex32074080 | 30 | Glass frit, for use in the manufacture of cathode-ray tubes | 0 | 1.1.2006 to 31.12.2008 |
| ex32081090ex37079090 | 1060 | Anti-reflection coating, consisting of an ester based polymer modified with a chromophore group, in the form of a solution of either 2-methoxy-1-propanol, 2-methoxy-1-methylethyl acetate or methyl-2-hydroxyisobutyrate, containing by weight not more than 10 % of polymer | 0 | 1.1.2006 to 31.12.2008 |
| ex32082010 | 10 | Copolymer of N-vinylcaprolactam, N-vinyl-2-pyrrolidone and dimethylaminoethyl methacrylate, in the form of a solution in ethanol containing by weight 34 % or more but not more than 40 % of copolymer | 0 | 1.1.2006 to 31.12.2008 |
| ex32082010ex39059100 | 2092 | Copolymer of vinylpyrrolidone and dimethylaminoethyl methacrylate, partially quaternised by diethyl sulfate, in the form of a solution in ethanol | 0 | 1.1.2006 to 31.12.2008 |
| ex32082010 | 30 | Solution of diundecyl phthalate and a copolymer of dibutyl maleate and isobutyl methacrylate in a hydrocarbon solvent | 0 | 1.1.2006 to 31.12.2008 |
| ex32089019ex39119099 | 1035 | Copolymer of maleic acid and methyl vinyl ether, monoesterified with ethyl and/or isopropyl and/or butyl groups, in the form of a solution in ethanol, ethanol and butanol, isopropanol or isopropanol and butanol | 0 | 1.1.2006 to 31.12.2008 |
| ex32089019ex39029090 | 1594 | Modified, chlorinated polyolefins, whether or not in a solution or dispersion | 0 | 1.1.2006 to 31.12.2008 |
| ex32089019 | 20 | Copolymer of polyurethane and silicone, in the form of a solution in a mixture of butanone, toluene and cyclohexanone, containing by weight 13 % or more but not more than 16 % of copolymer | 0 | 1.1.2006 to 31.12.2008 |
| ex32089019 | 30 | Solution containing:- (30 ± 5) % by weight of polyamide resin,
- ((6,5 ± 3,5) % by weight of diazonaphthoquinone,
- (55 ± 5) % by weight of 1-methyl-2-pyrrolidone,
- 1000 μg/kg or less of chloride,
- 1000 μg/kg or less of potassium and
- 1000 μg/kg or less of iron
| 0 | 1.1.2006 to 31.12.2008 |
| ex32089019 | 40 | Polymer of methylsiloxane, in the form of a solution in a mixture of acetone, butanol, ethanol and isopropanol, containing by weight 5 % or more but not more than 11 % of polymer of methylsiloxane | 0 | 1.1.2006 to 31.12.2008 |
| ex32089019 | 50 | Solution containing by weight:- (65 ± 10) % of γ-butyrolactone,
- (30 ± 10) % of polyamide resin,
- ((3,5 ± 1,5) % of naphthoquinone ester derivative and
- ((1,5 ± 0,5) % of arylsilicic acid
| 0 | 1.1.2006 to 31.12.2008 |
| ex32089019 | 85 | Mixture containing by weight :- 30 to 45 % polyamide resin;
- 2 to 10 % Diazonaphthoquinone;
- 50 to 65 % γ-Butyrolactone.
| 0 | 1.1.2006 to 31.12.2008 |
| ex32089099 | 10 | Solution based on chemically modified natural polymers, containing two or more of the following dyes:- methyl 8'-acetoxy-1,3,3,5,6-pentamethyl-2,3-dihydrospiro[1H-indole= - 2,3'-naphtho[2,1-b][1,4]oxazine]-9'-carboxylate,
- methyl 6-(isobutyryloxy)-2,2-diphenyl-2H-benzo[h]chromene= - 5-carboxylate,
- 13-isopropyl-3,3-bis(4-methoxyphenyl)-6,11-dimethyl-3,13-dihydrobenzo= [h]indeno[2,1-f]chromen-13-ol,
- ethoxycarbonylmethyl 8-methyl-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate,
- 13-ethyl-3-[4-(morpholino)phenyl]-3-phenyl-3,13-dihydrobenzo= [h]indeno[2,1-f]chromen-13-ol
| 0 | 1.1.2006 to 31.12.2008 |
| ex32089099 | 20 | Solution based on chemically modified natural polymers, containing two or more of the following dyes:- 4-[4-(13,13-dimethyl-3-phenyl-3,13-dihydrobenzo= [h]indeno[2,1-f]chromen-3-yl)phenyl]morpholine,
- 4-{4-[3-(4-methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo= [h]indeno[2,1-f]chromen-3-yl]phenyl}morpholine,
- cyclohexyl 8-methyl-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate,
- ethoxycarbonylmethyl 6-acetoxy-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate,
- 2-pentyl-7,7-diphenylbenzo[h]chromeno[6,5-d]-1,3-dioxin-4(7H)-one,
- 13-butyl-13-ethoxy-6,11-dimethoxy-3,3-bis(4-methoxyphenyl)-3,13-dihydrobenzo= [h]indeno[2,1-f]chromene,
- 3-(4-methoxyphenyl)-13,13-dimethyl-3-phenyl-3,13-dihydrobenzo= [h]indeno[2,1-f]chromene,
- 6,7-dimethoxy-3,3-bis(4-methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo= [h]indeno[2,1-f]chromene
| 0 | 1.1.2006 to 31.12.2008 |
| ex32151100ex32151900 | 1010 | Printing ink, liquid, consisting of a dispersion of a vinyl acrylate copolymer and colour pigments in isoparaffins, containing by weight not more than 13 % of vinyl acrylate copolymer and colour pigments | 0 | 1.1.2006 to 31.12.2008 |
| ex32159080 | 10 | Ink formulation, for use in the manufacture of ink-jet cartridges | 0 | 1.1.2006 to 31.12.2008 |
| ex32159080 | 20 | Heat-sensitive ink fixed on a plastic film | 0 | 1.1.2006 to 31.12.2008 |
| ex32159080 | 30 | Ink preparation, in the form of powder, for use in the manufacture of ink-filled bottles of a kind used in colour digital presses of heading 8443 | 0 | 1.1.2006 to 31.12.2008 |
| 33011210 | | Essential oil of orange, not deterpenated | 0 | 1.1.2006 to 31.12.2008 |
| ex34021190 | 10 | Surfactant mixture, of disodium salts of dodecyl (sulphophenoxy)benzenesulphonic acid and oxybis (dodecylbenzenesulphonic acid) | 0 | 1.1.2006 to 31.12.2008 |
| ex34029010 | 20 | Mixture of docusate sodium (INN) and sodium benzoate | 0 | 1.1.2006 to 31.12.2008 |
| ex34029010 | 30 | Non-aqueous surface-active preparation, containing:- polyethylene glycol alkylphenyl ether,
- 2,4,7,9-tetramethyldec-5-yne-4,7-diol and
- phosphoric acid esters
| 0 | 1.1.2006 to 31.12.2008 |
| ex34029010 | 40 | Amphoteric fluorinated surfactant in a mixture of water and ethanol, containing by weight 25 % or more but not more than 30 % surfactant. | 0 | 1.1.2006 to 31.12.2008 |
| ex34029090 | 10 | Crystalline powder obtained by the reaction of trisodium phosphate with a mixture of sodium hypochlorite and sodium chloride (chlorinated trisodium phosphate), containing by weight:- 3,5 % or more of available chlorine, measured iodometrically and
- 17,0 % or more of phosphorus evaluated as P2O5
| 0 | 1.1.2006 to 31.12.2008 |
| ex34039990 | 10 | Cutting-fluid preparation based on an aqueous solution of synthetic polypeptides | 0 | 1.1.2006 to 31.12.2008 |
| ex35040000 | 10 | Purified antigens obtained from genetically manipulated yeast cells, for the manufacture of detection tests for hepatitis C | 0 | 1.1.2006 to 31.12.2008 |
| ex35040000 | 20 | Glycoprotein 160 obtained from human immunodeficiency virus, HIV-1 strain | 0 | 1.1.2006 to 31.12.2008 |
| ex35051050 | 20 | O-(2-Hydroxyethyl)-derivative of hydrolysed maize starch | 0 | 1.1.2006 to 31.12.2008 |
| ex35061000 | 11 | Cartridge containing an adhesive based on a mixture of silicon modified polymer and aluminium hydroxide for use in the manufacture of deflection yokes | 0 | 1.1.2006 to 31.12.2008 |
| ex35069100 | 10 | Adhesive based on an aqueous dispersion of a mixture of dimerised rosin and a copolymer of ethylene and vinyl acetate (EVA) | 0 | 1.1.2006 to 31.12.2008 |
| ex35069100 | 20 | Heat-activated adhesive based on phenolic resin and rubber, in the form of a film on a release paper, for use in the manufacture of brake pads for the automotive industry | 0 | 1.1.2006 to 31.12.2008 |
| ex35079090 | 10 | Asparaginase | 0 | 1.1.2006 to 31.12.2008 |
| ex35079090 | 20 | Enzymatic preparation based on thermolysine | 0 | 1.1.2006 to 31.12.2008 |
| ex35079090 | 40 | Avian myeloblastosis virus (AMV) reverse transcriptase | 0 | 1.1.2006 to 31.12.2008 |
| ex35079090 | 60 | Trypsin certified to be produced in compliance with EC Good Manufacturing Practice (cGMP) and having a specific enzyme activity of 0,45 μkat/mg or more, for the manufacture of goods of heading 3004 | 0 | 1.1.2006 to 31.12.2008 |
| ex35079090 | 70 | Chymotrypsin | 0 | 1.1.2006 to 31.12.2008 |
| ex37013000 | 10 | Relief printing plate, of a kind used for printing on newsprint, consisting of a metal substrate coated with a photopolymer layer of a thickness of 0,2 mm or more but not exceeding 0,8 mm, not covered with a release film, of a total thickness not exceeding 1 mm | 0 | 1.1.2006 to 31.12.2008 |
| ex37019900 | 10 | Plate of quartz or of glass, covered with a film of chromium and coated with a photosensitive or electron-sensitive resin, for the manufacture of masks for the goods of heading 8541 or 8542 | 0 | 1.1.2006 to 31.12.2008 |
| ex37023199 | 10 | Colour negative film, for the manufacture of instant-picture film packs | 0 | 1.1.2006 to 31.12.2008 |
| ex37024300ex37024400 | 1010 | Photographic film, of a nominal width of 459, 669 or 761 mm, composed of several layers, including two polyester films, a carbon layer, an adhesive layer, whether or not with a layer of a copolymer of styrene with acrylonitrile | 0 | 1.1.2006 to 31.12.2008 |
| ex37039010 | 10 | Paper sheet, coated with silver halide emulsion, for the manufacture of goods of subheading 37012000 | 0 | 1.1.2006 to 31.12.2008 |
| ex37071000 | 10 | Photosensitive emulsion for the sensitization of silicon discs | 0 | 1.1.2006 to 31.12.2008 |
| ex37071000 | 15 | Sensitising emulsion, consisting of diazooxonaphtalenesulphonic acid ester and phenolic resins, containing by weight not more than 12 % of diazooxonaphtalenesulfonic acid ester, in 2-methoxy-1-methylethyl acetate or ethyl lactate | 0 | 1.1.2006 to 31.12.2008 |
| ex37071000 | 20 | Sensitising emulsion, consisting of diazooxonaphthalenesulfonic acid ester and phenolic resins, containing by weight not more than 6 % of diazooxonaphthalenesulfonic acid ester, in 2-methoxy-1-methylethyl acetate | 0 | 1.1.2006 to 31.12.2008 |
| ex37071000 | 25 | Sensitising emulsion containing:- phenolic or acrylic resins
- a maximum 2 % by weight of light sensitive acid precursor,
in a solution containing 2-methoxy-1-methylethyl acetate or ethyl lactate | 0 | 1.1.2006 to 31.12.2008 |
| ex37079030 | 10 | Toner, in the form of powder, consisting of a copolymer of styrene and butyl acrylate and either magnetite or carbon black, for use as a developer in the manufacture of cartridges for facsimile machines or computer printers | 0 | 1.1.2006 to 31.12.2008 |
| ex37079030 | 20 | Toner, based on a polyol resin, in the form of powder | 0 | 1.1.2006 to 31.12.2008 |
| ex37079030 | 30 | Two-component toner, liquid, in the form of a set consisting of a container containing a dispersion of a vinyl acrylate copolymer and colour pigments in isoparaffins, containing by weight not more than 13 % of vinyl acrylate copolymer and colour pigments, and a container containing isoparaffins | 0 | 1.1.2006 to 31.12.2008 |
| ex37079030 | 40 | Polyester resin based toner, manufactured by a polymerisation process, for use as a developer in the manufacture of computer printer and copier cartridges | 0 | 1.1.2006 to 31.12.2008 |
| ex37079090 | 10 | Anti-reflection coating, consisting of a modified methacrylic polymer, containing by weight not more than 10 % of polymer, in the form of a solution in 2-methoxy-1-methylethyl acetate and 1-methoxypropan-2-ol | 0 | 1.1.2006 to 31.12.2008 |
| ex37079090 | 20 | Anti-reflection coating, consisting of a copolymer of hydroxystyrene and methyl methacrylate, modified with chromophore groups, containing by weight not more than 10 % of polymer, in the form of a solution in 1-methoxypropan-2-ol and ethyl lactate | 0 | 1.1.2006 to 31.12.2008 |
| ex37079090ex38249099 | 3091 | Anti-reflection coating, in the form of an aqueous solution, containing by weight:- not more than 2 % of perhalogenated sulfonic acid derivatives,
- not more than 1 % of a vinyl polymer
| 0 | 1.1.2006 to 31.12.2008 |
| ex37079090 | 40 | Anti-reflection coating, consisting of amino-resin and modified phenolic resin, in the form of a solution in 1-methoxypropan-2-ol and ethyl lactate, containing by weight 15 % or more but not more than 24 % of both polymers taken together | 0 | 1.1.2006 to 31.12.2008 |
| ex37079090 | 50 | Anti-reflection coating, containing by weight:- 30 % or more but not more than 40 % of cyclohexanone,
- 30 % or more but not more than 40 % of 1-methyl-2-pyrrolidone,
- 20 % or more but not more than 30 % of tetrahydrofurfuryl alcohol
| 0 | 1.1.2006 to 31.12.2008 |
| ex38012090 | 10 | Colloidal graphite in suspension in water, for use as internal coating in colour cathode-ray tubes | 0 | 1.1.2006 to 31.12.2008 |
| 38052000 | | Pine oil | 1,7 | 1.1.2006 to 31.12.2008 |
| ex38081090 | 10 | Indoxacarb (ISO) and its (R) isomer, fixed on a support of silicon dioxide | 0 | 1.1.2006 to 31.12.2008 |
| ex38081090 | 20 | Preparation containing by weight 2 % or more but not more than 4 % of azadirachtin (ISO), not put up for retail sale | 0 | 1.1.2006 to 31.12.2008 |
| ex38081090 | 30 | Preparation containing endospores and protein crystals derived from the hybrid strain GC 91 of Bacillus thuringiensis Berliner subsp. aizawai and kurstaki | 0 | 1.1.2006 to 31.12.2008 |
| ex38081090 | 40 | Spinosad (ISO) | 0 | 1.1.2006 to 31.12.2008 |
| ex38082080 | 10 | Fungicide in the form of a powder, containing by weight 65 % or more but not more than 75 % of hymexazole (ISO), not put up for retail sale | 0 | 1.1.2006 to 31.12.2008 |
| ex38082080 | 20 | Preparation based on diiodomethyl p-tolyl sulfone, not put up for retail sale | 0 | 1.1.2006 to 31.12.2008 |
| ex38082080 | 30 | Preparation consisting of a suspension of pyrithione zinc (INN) in water, containing by weight 24 % or more but not more than 26 % of pyrithione zinc (INN) | 0 | 1.1.2006 to 31.12.2008 |
| ex38084020 | 10 | Preparation containing by weight:- 58 % or more but not more than 62 % of 1-bromo-3-chloro-5,5-dimethylhydantoin,
- 26 % or more but not more than 29 % of 1,3-dichloro-5,5-dimethylhydantoin,
- 10 % or more but not more than 12 % of 1,3-dichloro-5-ethyl-5-methylhydantoin,
for the manufacture of swimming-pool disinfectants | 0 | 1.1.2006 to 31.12.2008 |
| ex38084090 | 10 | 1-Dodecylguanidine hydrochloride, in the form of a solution in isopropanol and water, containing by weight 40 % or less of 1-dodecylguanidine hydrochloride | 0 | 1.1.2006 to 31.12.2008 |
| ex38099100 | 10 | Mixture of 5-ethyl-2-methyl-2-oxo-1,3,2λ5-dioxaphosphoran-5-ylmethyl methyl methylphosphonate and bis(5-ethyl-2-methyl-2-oxo-1,3,2λ5-dioxaphosphoran-5-ylmethyl) methylphosphonate | 0 | 1.1.2006 to 31.12.2008 |
| ex38099200 | 10 | Paper anti-fading agent, consisting of a mixture of magnesium trisilicate and monosodium salt of 2,2'-methylenebis(4,6-di-tert-butylphenyl) phosphate | 0 | 1.1.2006 to 31.12.2008 |
| ex38112100 | 10 | Salts of dinonylnaphthalenesulfonic acid, in the form of a solution in mineral oils | 0 | 1.1.2006 to 31.12.2008 |
| ex38112100 | 20 | Additives for lubricating oils, based on complex organic molybdenum compounds, in the form of a solution in mineral oil | 0 | 1.1.2006 to 31.12.2008 |
| ex38119000 | 10 | Dinonylnaphthylsulphonic acid salt, in the form of a solution in mineral oil, for use as an additive for distillate fuels and lubricating oils | 0 | 1.1.2006 to 31.12.2008 |
| ex38123080 | 20 | Mixture containing predominantly bis(2,2,6,6-tetramethyl-1-octyloxy-4-piperidyl) sebacate | 0 | 1.1.2006 to 31.12.2008 |
| ex38123080 | 30 | Compound stabilisers containing by weight 15 % or more but not more than 40 % of sodium perchlorate and not more than 70 % of 2-(2-methoxyethoxy)ethanol | 0 | 1.1.2006 to 31.12.2008 |
| ex38140090 | 10 | Mixture containing by weight 25 % or more but not more than 35 % of dimethyl sulfoxide and 65 % or more but not more than 75 % of monoethanolamine | 3 | 1.1.2006 to 31.12.2008 |
| ex38140090 | 20 | Mixture containing by weight:- 69 % or more but not more than 71 % of 1-methoxypropan-2-ol,
- 29 % or more but not more than 31 % of 2-methoxy-1-methylethyl acetate
| 0 | 1.1.2006 to 31.12.2008 |
| ex38140090 | 30 | Azeotrope mixture containing by weight 30 % or more but not more than 50 % of trans-dichloroethylene and a mixture of isomers of nonafluorobutyl methyl ether or nonafluorobutyl ethyl ether | 0 | 1.1.2006 to 31.12.2008 |
| ex38140090 | 40 | Azeotrope mixtures containing isomers of nonafluorobutyl methyl ether and/or nonafluorobutyl ethyl ether | 0 | 1.1.2006 to 31.12.2008 |
| ex38151200 | 10 | Catalyst, in the form of granules or rings of a diameter of 3 mm or more but not exceeding 10 mm, consisting of silver on an aluminium oxide support and containing by weight 8 % or more but not more than 40 % of silver | 0 | 1.1.2006 to 31.12.2008 |
| ex38151200 | 20 | Catalyst, consisting of palladium and rhenium, fixed on a support of active carbon, in the form of powder, containing:- 0,5 % or more but not more than 1,5 % by weight of palladium,
- 3 % or more but not more than 5 % by weight of rhenium and
- 0,1 mole % or more but not more than 1 mole % of alkaline metals,
for use in the manufacture of tetrahydrofuran | 0 | 1.1.2006 to 31.12.2008 |
| ex38151200 | 30 | Catalyst, consisting of platinum and palladium fixed on a support, containing by weight:- not more than 1,5 % of platinum,
- not more than 1,5 % of palladium and
- not more than 0,1 % of alkali metals,
for use in hydrogenation of white oils | 0 | 1.1.2006 to 31.12.2008 |
| ex38151990 | 10 | Catalyst, consisting of chromium trioxide or dichromium trioxide fixed on a support of silicon dioxide, of a pore volume, as determined by the nitrogen absorption method, of 2 cm3/g or more | 0 | 1.1.2006 to 31.12.2008 |
| ex38151990 | 15 | Catalyst, in the form of a powder, consisting of a mixture of metal oxides fixed on a support of silicon dioxide, containing by weight 20 % or more but not more than 40 % of molybdenum, bismuth and iron evaluated together, for use in the manufacture of acrylonitrile | 0 | 1.1.2006 to 31.12.2008 |
| ex38151990 | 20 | Catalyst consisting of chromium oxides and titanium dioxide fixed on a support of silicon dioxide, aluminium oxide or aluminium phosphate | 0 | 1.1.2006 to 31.12.2008 |
| ex38151990 | 30 | Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polypropylene | 0 | 1.1.2006 to 31.12.2008 |
| ex38151990 | 35 | Catalyst, in the form of rodlets of a length of 5,5 mm or more but not exceeding 6,5 mm, consisting of copper oxide and zinc oxide fixed on a support of aluminium oxide, containing by weight:- 55 % or more but not more than 60 % of copper oxide and
- 30 % or more but not more than 35 % of zinc oxide
| 0 | 1.1.2006 to 31.12.2008 |
| ex38151990 | 40 | Catalyst, in the form of spheres of a diameter of 4,2 mm or more but not exceeding 9 mm, consisting of a mixture of metals oxides containing predominantly oxides of molybdenum, vanadium and copper, on a support of silicon dioxide and/or aluminium oxide, for use in the manufacture of acrylic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex38151990 | 45 | Catalyst, consisting predominantly of dichromium copper tetraoxide and copper (II) oxide, containing by weight 38 % or more but not more than 48 % of copper, evaluated as copper (II) oxide, fixed on a support of silicon dioxide, for the hydrogenation of acetophenones | 0 | 1.1.2006 to 31.12.2008 |
| ex38151990 | 50 | Catalyst consisting of organo-metallic compounds of titanium, magnesium and aluminium on a support of silicon dioxide, in the form of a suspension in tetrahydrofuran | 0 | 1.1.2006 to 31.12.2008 |
| ex38151990 | 55 | Catalyst consisting of a mixture of metal oxides containing chromium trioxide, fixed on a support of silicon dioxide | 0 | 1.1.2006 to 31.12.2008 |
| ex38151990 | 60 | Catalyst consisting of dichromium trioxide, fixed on a support of aluminium oxide | 0 | 1.1.2006 to 31.12.2008 |
| ex38151990 | 65 | Catalyst consisting of phosphoric acid chemically bonded to a support of silicon dioxide | 0 | 1.1.2006 to 31.12.2008 |
| ex38151990 | 70 | Catalyst consisting of organo-metallic compounds of aluminium and zirconium, fixed on a support of silicon dioxide | 0 | 1.1.2006 to 31.12.2008 |
| ex38151990 | 75 | Catalyst consisting of organo-metallic compounds of aluminium and chromium, fixed on a support of silicon dioxide | 0 | 1.1.2006 to 31.12.2008 |
| ex38151990 | 80 | Catalyst consisting of organo-metallic compounds of magnesium and titanium, fixed on a support of silicon dioxide, in the form of a suspension in mineral oil | 0 | 1.1.2006 to 31.12.2008 |
| ex38151990 | 85 | Catalyst consisting of organo-metallic compounds of aluminium, magnesium and titanium, fixed on a support of silicon dioxide, in the form of powder | 0 | 1.1.2006 to 31.12.2008 |
| ex38151990 | 86 | Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polyolefins | 0 | 1.1.2006 to 31.12.2008 |
| ex38159090 | 15 | Catalyst, consisting of a mixture of oxides containing by weight more than 96 % of oxides of molybdenum, vanadium, nickel and antimony, whether or not mixed with porcelain balls, for use in the manufacture of acrylic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex38159090 | 20 | Catalyst, in powder form, consisting of a mixture of titanium trichloride and aluminium chloride, containing by weight:- 20 % or more but not more than 30 % of titanium and
- 55 % or more but not more than 72 % of chlorine
| 0 | 1.1.2006 to 31.12.2008 |
| ex38159090 | 25 | Catalyst, consisting of a mixture of oxides containing by weight more than 96 % of oxides of molybdenum, bismuth, nickel, iron and silicon, whether or not mixed with porcelain balls, for use in the manufacture of acrylaldehyde | 0 | 1.1.2006 to 31.12.2008 |
| ex38159090 | 30 | Catalyst, in the form of a powder, containing by weight 82 % or more of copper and of a specific surface of 0,5 m2/g or more but not exceeding 8 m2/g | 0 | 1.1.2006 to 31.12.2008 |
| ex38159090 | 35 | Catalyst, in the form of a suspension in oil, consisting of titanium trichloride and aluminium trichloride, containing by weight (on an oil-free basis):- 15 % or more but not more than 30 % of titanium and
- 40 % or more but not more than 72 % of chlorine
| 0 | 1.1.2006 to 31.12.2008 |
| ex38159090 | 40 | Catalyst, in the form of rodlets of a length of 5 mm or more but not exceeding 8 mm, consisting of a mixture of metals oxides containing predominantly oxides of iron, molybdenum and bismuth, whether or not containing silicon dioxide as filler, for use in the manufacture of acrylic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex38159090 | 50 | Catalyst containing titanium trichloride, in the form of a suspension in hexane or heptane containing by weight, in the hexane- or heptane-free material, 9 % or more but not more than 30 % of titanium | 0 | 1.1.2006 to 31.12.2008 |
| ex38159090 | 60 | Catalyst, in the form of rodlets, consisting of an acid aluminosilicate (zeolite):- with a mole-ratio of silicon dioxide: dialuminium trioxide of not less than 500: 1 and
- containing by weight 0,2 % or more but not more than 0,8 % of platinum
| 0 | 1.1.2006 to 31.12.2008 |
| ex38159090 | 65 | Catalyst based on a mordenite zeolite, in the form of granules, for use in the manufacture of mixtures of methylamines containing by weight 50 % or more of dimethylamine | 0 | 1.1.2006 to 31.12.2008 |
| ex38159090 | 70 | Catalyst, consisting of a mixture of (2-hydroxypropyl)trimethylammonium formate and dipropylene glycols | 0 | 1.1.2006 to 31.12.2008 |
| ex38159090 | 75 | Catalyst, consisting of a mixture of 1,4-diazabicyclo[2.2.2]octane, 2-hydroxyethyliminodi(acetic acid) and dibutyltin di(acetate), containing by weight 5 % or more but not more than 10 % of 1,4-diazabicyclo[2.2.2]octane | 0 | 1.1.2006 to 31.12.2008 |
| ex38159090 | 80 | Catalyst consisting predominantly of dinonylnaphthalenedisulfonic acid in the form of a solution in isobutanol | 0 | 1.1.2006 to 31.12.2008 |
| ex38159090 | 81 | Catalyst, containing by weight 69 % or more but not more than 79 % of (2-hydroxy-1-methylethyl)trimethylammonium 2-ethylhexanoate | 0 | 1.1.2006 to 31.12.2008 |
| ex38159090 | 82 | Catalyst, containing by weight 35 % or more but not more than 55 % of (2-hydroxy-1-methylethyl)trimethylammonium formate and formic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex38159090 | 83 | Catalyst, in the form of powder, containing aluminium magnesium hydroxide hydrate, rare-earth metals oxides and divanadium pentaoxide | 0 | 1.1.2006 to 31.12.2008 |
| ex38159090 | 84 | Powder catalyst containing by weight a minimum 96 % of oxides of copper, chromium and iron | 0 | 1.1.2006 to 31.12.2008 |
| ex38159090 | 85 | Catalyst based on aluminosilicate (zeolite), for the transalkylation of alkylaromatic hydrocarbons or the oligomerization of olefins | 0 | 1.1.2006 to 31.12.2008 |
| ex38159090 | 86 | Catalyst, in the form of rodlets, consisting of an aluminosilicate (zeolite), containing by weight 2 % or more but not more than 3 % of rare-earth metals oxides and less than 1 % of disodium oxide | 0 | 1.1.2006 to 31.12.2008 |
| ex38159090 | 87 | Reaction initiator, consisting of diisopropyl peroxydicarbonate, in the form of a solution in diallyl 2,2'-oxydiethyl dicarbonate | 0 | 1.1.2006 to 31.12.2008 |
| ex38159090 | 88 | Catalyst, consisting of titanium tetrachloride and magnesium chloride, containing by weight on an oil- and hexane-free basis :- 4 % or more but not more than 10 % of titanium and
- 10 % or more but not more than 20 % magnesium
| 0 | 1.1.2006 to 31.12.2008 |
| ex38159090 | 89 | Rhodococcus rhodocrous J1 bacteria, containing enzymes, suspended in a polyacrylamide gel, for use as a catalyst in the production of acrylamide by the hydration of acrylonitrile | 0 | 1.1.2006 to 31.12.2008 |
| ex38170080 | 10 | Mixture of alkylnaphthalenes, containing by weight:- 88 % or more but not more than 98 % of hexadecylnaphthalene
- 2 % or more but not more than 12 % of dihexadecylnaphthalene
| 0 | 1.1.2006 to 31.12.2008 |
| ex38231910 | 91 | Mixture of fatty acids containing by weight:- 2 % or more but not more than 6 % of hexanoic acid,
- 53 % or more but not more than 60 % of octanoic acid,
- 34 % or more but not more than 42 % of decanoic acid and
- not more than 2 % of dodecanoic acid
| 0 | 1.1.2006 to 31.12.2008 |
| ex38249015 | 10 | Acid aluminosilicate (artificial zeolite of the Y type) in the sodium form, containing by weight not more than 11 % of sodium evaluated as sodium oxide, in the form of rodlets | 0 | 1.1.2006 to 31.12.2008 |
| ex38249064 | 01 | Intermediate products of the antibiotics manufacturing process obtained from the fermentation of Micromonospora purpurea, whether or not dried | 0 | 1.1.2006 to 31.12.2008 |
| ex38249064 | 02 | Cholic acid and 3α,12α-dihydroxy-5β-cholan-24-oic acid (deoxycholic acid), crude | 0 | 1.1.2006 to 31.12.2008 |
| ex38249064 | 03 | Products obtained by the N-ethylation of sisomycin (INN) | 0 | 1.1.2006 to 31.12.2008 |
| ex38249064 | 04 | Intermediate products of the antibiotics manufacturing process obtained from the fermentation of Micromonospora inyoensis, whether or not dried | 0 | 1.1.2006 to 31.12.2008 |
| ex38249064 | 05 | Residues of manufacture containing by weight 40 % or more of 11β,17,20,21-tetrahydroxy-6-methylpregna-1,4-dien-3-one 21-acetate | 0 | 1.1.2006 to 31.12.2008 |
| ex38249064 | 06 | Mixture of inosine (INN), dimepranol (INN) and acedoben (INN) | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 01 | Colloidal diantimony pentaoxide | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 02 | Mixture of nitromethane and 1,2-epoxybutane | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 03 | Grains or granules, consisting of a mixture of dialuminium trioxide and zirconium dioxide, containing by weight:- 70 % or more but not more than 78 % of dialuminium trioxide and
- 19 % or more but not more than 26 % of zirconium dioxide
| 5.2 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 04 | Crude lithium hypochlorite | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 05 | Polysilicate, modified with phosphoric acid, in the form of a solution in a mixture of ethanol, isopropanol and tetrahydrofuran, containing by weight 3 % or more but not more than 6 % of polysilicate | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 06 | Preparation in the form:- of powder, containing by weight 75 % or more of zinc bis[3,5-bis(1-phenylethyl)salicylate] or
- of aqueous dispersion, containing by weight 22 % or more but not more than 55 % of zinc bis[3,5-bis(1-phenylethyl)salicylate]
| 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 07 | Film consisting of the oxides of either barium or calcium and either titanium or zirconium, mixed with binding materials | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 08 | Preparation consisting essentially of alkaline asphalt sulfonate, of:- a specific gravity of 0,9 or more but not exceeding 1,5 and
- a solubility in water of 70 % by weight or more
| 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 09 | Anti-corrosion preparations consisting of salts of dinonylnaphthalenesulfonic acid, either:- on a support of mineral wax, whether or not modified chemically, or
- in the form of a solution in an organic solvent
| 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 10 | Calcined bauxite (refractory grade) | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 11 | Magnetisable iron oxide, in the form of powder, containing by weight:- 30 % or more but not more than 38 % of bivalent iron in relation to the total iron and
- 1 % or more but not more than 4 % of cobalt
| 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 13 | Mixture containing by weight:- 7 % or more but not more than 9 % of 2-methyl-1,3-phenylene diisocyanate,
- 31 % or more but not more than 34 % of 4-methyl-1,3-phenylene diisocyanate,
- 10 % or more but not more than 13 % of 2,4'-methylenediphenyl diisocyanate,
- 46 % or more but not more than 49 % of 4,4'-methylenediphenyl diisocyanate
| 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 14 | Mixture of magnesium bromide 2-oxoperhydroazepin-1-ide and ε-caprolactam | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 15 | Mixture of disodium N-benzyloxycarbonyl-L-aspartate and sodium chloride, in the form of a solution in water | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 16 | Disodium 9,10-dihydro-9,10-dioxoanthracene-2,7-disulfonate, containing by weight 10 % or more but not more than 20 % of sodium sulfate | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 17 | Eutectic alloy wholly of potassium and sodium, containing by weight 77 % or more but not more than 79 % of potassium | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 18 | Blend of terephthaloyl dichloride and isophthaloyl dichloride | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 20 | Preparation consisting by weight of 83 % or more of 3a,4,7,7a-tetrahydro-4,7-methanoindene (dicyclopentadiene), a synthetic rubber, whether or not containing by weight 7 % or more of tricyclopentadiene, and:- either an aluminium-alkyl compound,
- or an organic complex of tungsten
- or an organic complex of molybdenum
| 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 21 | Mixture of tris[2-chloro-1-(chloromethyl)ethyl] phosphate and oligomers of methylphosphonic acid and phosphoric acid with ethane-1,2-diol | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 22 | Mixture of tris[2-chloro-1-(chloromethyl)ethyl] phosphate and oligomers of 2-chloroethyl phosphate with ethane-1,2-diol | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 23 | Mixture of sucrose esters, derived from the esterification of sucrose with industrial stearic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 24 | Preparations consisting predominantly of phosphabicyclononanes and P-alkyl derivatives thereof, in the form of a solution in 4-tert-butyltoluene | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 25 | Lithium tantalate wafers, undoped | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 28 | Preparation consisting predominantly of ethylene glycol and N,N-dimethylformamide or ethylene glycol and γ-butyrolactone, for the manufacture of electrolytic capacitors | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 29 | Preparation consisting predominantly of γ-butyrolactone and quaternary ammonium salts, for the manufacture of electrolytic capacitors | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 30 | 2,4,7,9-Tetramethyldec-5-yne-4,7-diol, hydroxyethylated | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 31 | Copper zinc ferrite, coated with a silicone resin, in the form of granules of a size not exceeding 120 μm | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 32 | Styrene oligomer | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 33 | Preparation consisting of α-(4-allyloxycarbonylbenzoyl)-ω-allyloxypoly= [oxy(2-methylethylene)oxyterephthaloyl] and either diallyl-2,2'-oxydiethyl dicarbonate or diallyl isophthalate | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 35 | Nitrosylsulfuric acid of a purity by weight of 70 % or more but not exceeding 73 % | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 36 | Mixtures of silanol and diphosphorus pentaoxide, in the form of a solution in a mixture of ethanol and ethyl acetate, containing by weight 6 % or more but not more than 10 % of silanol and 0,1 % or more but not more than 0,3 % of diphosphorus pentaoxide | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 37 | Sintered bauxite pellets, of a diameter not exceeding 2 mm | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 39 | Mixture containing by weight 40 % or more but not more than 50 % of 2-hydroxyethyl methacrylate and 40 % or more but not more than 50 % of glycerol ester of boric acid | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 40 | Azelaic acid of a purity by weight of 75 % or more but not exceeding 85 % | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 42 | Mixed metals oxides, in the form of powder, containing by weight:- either 5 % or more of barium, neodymium or magnesium and 15 % or more of titanium,
- or 30 % or more of lead and 5 % or more of niobium,
for use in the manufacture of dielectric films or for use as dielectric materials in the manufacture of multilayer ceramic capacitors | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 43 | 7-Aminonaphthalene-1,3,6-trisulfonic acid and its salts, of a purity by weight of 65 % or more | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 44 | Mixture containing by weight:- 60 % or more of 2-[N-(2-cyanoethyl)anilino]ethyl acetate and
- 20 % or more of acetic acid
| 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 45 | Preparations consisting predominantly of ethylene glycol and:- either diethylene glycol, dodecandioic acid and ammonia water,
- or silicon oxide,
- or ammonium hydrogen azelate,
- or ammonium hydrogen azelate and silicon oxide,
- or dodecandioic acid, ammonia water and silicon oxide,
for the manufacture of electrolytic capacitors | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 46 | Carboxylic acid anhydride based hardener for epoxyde resin, in liquid form, of a specific weight at 25 oC of 1,15 g/cm3 or more but not exceeding 1,18 g/cm3 | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 49 | Mixed oxides of metals, in the form of powder, containing by weight:- 70 % or more but not more than 75 % of iron oxide,
- 10 % or more but not more than 20 % of zinc oxide,
- 10 % or more but not more than 15 % of magnesium oxide,
- 1 % or more but not more than 5 % of manganese oxide and
- 1 % or more but not more than 3 % of copper oxide
| 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 50 | Zeolites consisting of oxides of barium, aluminium and silicon, containing by weight 30 % or more but not more than 40 % of barium oxide, in the form of spheres of which 80 % or more by weight have a diameter of 0,3 mm or more but not more than 1,2 mm | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 53 | Sodium 4-hydroxynaphthalene-1-sulfonate, of a purity by weight of 70 % or more but not exceeding 80 % | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 54 | 2-Hydroxybenzonitrile, in the form of a solution in N,N-dimethylformamide, containing by weight 45 % or more but not more than 55 % of 2-hydroxybenzonitrile | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 55 | Mixture containing by weight 75 % or more of pentaerythritol triallyl ether | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 57 | Mixture of trialkylphosphine oxides | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 58 | Platinum oxide fixed on a porous support of aluminium oxide, containing by weight 0,1 % or more but not more than 1 % of platinum and 0,5 % or more but not more than 5 % of ethylaluminium dichloride | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 60 | α-Phenoxycarbonyl-ω-phenoxypoly[oxy(2,6-dibromo-1,4-phenylene)= isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 61 | Mixture of metal oxides, in the form of powder, containing by weight:- 20 % or more of barium,
- 10 % or more of titanium and
- 4 % or more of lead or 3 % or more of niobium or 0,7 % or more of zirconium,
for use as dielectric material in the manufacture of multilayer ceramic capacitors | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 63 | Triethylborane, in the form of a solution in tetrahydrofuran | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 64 | Aluminium sodium silicate, in the form of spheres of a diameter of:- either 1,6 mm or more but not exceeding 3,4 mm,
- or 4 mm or more but not exceeding 6 mm
| 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 65 | Mixture of tris(alkoxycarbonylamino)-1,3,5-triazines in which alkoxy groups are methoxy and butoxy | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 66 | Mixture of primary tert-alkylamines | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 67 | Preparation consisting of indium tin oxide dispersed in organic solvents | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 70 | Preparation, in an aqueous solution, of tetramethylammonium hydroxide and a surfactant containing:- 2,38 % (+/-0,01) by weight of tetramethylammonium hydroxide, and
- a surfactant of 100 to 500 ppm.
| 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 72 | Solution containing by weight 80 % or more of 2,4,6-trimethylbenzaldehyde in acetone | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 73 | Particles of silicon dioxide on which are covalently bonded organic compounds, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 75 | Mixture of 2,2-bis[2-(perfluoroalkyl)ethylthiomethyl]propane-1,3-diols | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 77 | Diethylmethoxyborane, in the form of a solution in tetrahydrofuran | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 80 | Preparation containing by weight 81 % or more but not more than 89 % bis (3,4-epoxy-cyclohexylmethyl)-adipate | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 81 | Calcium oxide stabilised zirconia in the form of lumps of which 94 % or more by weight is retained on a 16 mm sieve, containing by weight:- 92 % or more of zirconium dioxide and
- 2 % or more but not more than 6 % of calcium oxide
| 0 | 1.1.2006 to 31.12.2008 |
| ex38249099ex39074000 | 8220 | α-(2,4,6-Tribromophenyl)-ω-(2,4,6-tribromophenoxy)poly[oxy(2,6-dibromo-= 1,4-phenylene)isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 83 | Mixture containing:- unsaturated, dimerised fatty acids, hydrogenated and polymerised with ethylenediamine and octadecan-1-ol,
- white oil,
- 2-methylpentane-2,4-diol and
- glycerides of decanoic and octanoic acids
| 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 84 | Reaction product, containing by weight:- 1 % or more but not more than 40 % of molybdenum oxide,
- 10 % or more but not more than 50 % of nickel oxide,
- 30 % or more but not more than 70 % of tungsten oxide
| 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 85 | Particles of magnesium sodium silicate on which are ionically bonded chiral complexes of tris(1,10-phenanthroline)ruthenium, for use in the manufacture of high performance liquid chromatography columns (HPLC) | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 88 | Oligomeric reaction product, consisting of bis(4-hydroxyphenyl) sulfone and 1,1'-oxybis(2-chloroethane) | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 89 | Oligomer of tetrafluoroethylene, having tetrafluoroiodoethyl end-groups | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 92 | Bis{4-[(5-chloro-2-hydroxyphenyl)azo]-3-hydroxy-N-phenyl-2-naphthalene= carboxyamidate}ferrate with a mixture of ammonium, sodium and hydrogen cations | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 93 | Prepared resin, based on diallyl 2,2'-oxydiethyl dicarbonate and oligomers thereof, containing by weight 42 % or more but not more than 52 % of diallyl 2,2'-oxydiethyl dicarbonate and 33 % or more but not more than 43 % of a copolymer of terephthalic acid, propane-1,2-diol and allyl alcohol | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 94 | Prepared resin, based on diallyl 2,2'-oxydiethyl dicarbonate and oligomers thereof, containing by weight 73 % or more of diallyl 2,2'-oxydiethyl dicarbonate | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 95 | Mixture of phytosterols, in the form of flakes, containing by weight 80 % or more of sterols and not more than 4 % of stanols | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 96 | Zirconium dioxide, stabilised with calcium oxide, in the form of a powder | 0 | 1.1.2006 to 31.12.2008 |
| ex38249099 | 97 | Preparation containing by weight either 10 % or more but not more than 20 % of lithiumfluorophosphate or 5 % or more but not more than 10 % of lithium perchlorate in mixtures of organic solvents | 0 | 1.1.2006 to 31.12.2008 |
| ex38256900 | 10 | Spent catalyst, in the form of rodlets of diameter of 1 mm or more but not exceeding 3 mm, containing a mixture of sulfides of tungsten and of nickel on a support of zeolite, containing by weight not more than 10 % of tungsten and not more than 10 % of nickel, for regeneration as a catalyst for hydrocarbon cracking | 0 | 1.1.2006 to 31.12.2008 |
| ex39011010 | 10 | Linear polyethylene, of a specific gravity of 0,928 or more but not exceeding 0,935 and of a melt flow index of less than 0,6 g/min, for the manufacture of shrinkmelt binder fibres | 0 | 1.1.2006 to 31.12.2008 |
| ex39011090 | 10 | Polyethylene for the manufacture of photo-resist film for semiconductors or printed circuits | 0 | 1.1.2006 to 31.12.2008 |
| ex39011090 | 20 | Polyethylene, in the form of granules, of a specific gravity of 0,925 (± 0,0015), a melt flow index of 0,3 g/10 min (± 0,05 g/10 min), for the manufacture of blown films of a Haze value not exceeding 6 % and an elongation at break (MD/TD) of 210/340 | 0 | 1.1.2006 to 31.12.2008 |
| ex39011090 | 30 | Polyethylene, in the form of granules, containing by weight 15 % or more of copper, for the purpose of protecting against static charge build up and corrosion | 0 | 1.1.2006 to 31.12.2008 |
| ex39012090 | 10 | Polyethylene, in one of the forms mentioned in note 6(b) to Chapter 39, of a specific gravity of 0,945 or more but not exceeding 0,985, for the manufacture of films for typewriter ribbon or similar ribbon | 0 | 1.1.2006 to 31.12.2008 |
| ex39012090 | 20 | Polyethylene, containing by weight 35 % or more but not more than 45 % of mica | 0 | 1.1.2006 to 31.12.2008 |
| ex39012090 | 30 | Polyethylene, in one of the forms mentioned in note 6(b) to Chapter 39, of a specific gravity of 0,940 or more but not exceeding 0,943 and a melt flow index of 27 g/10 min (± 5 g/10 min) (MFI 190 oC/2,16 kg as determined by the ISO 1133 method), for the manufacture of bicomponent spunbonded non-wovens | 0 | 1.1.2006 to 31.12.2008 |
| ex39019090 | 81 | Copolymer of ethylene and propylene, modified with maleic anhydride, containing by weight more than 55 % of ethylene and not more than 3 % of maleic anhydride | 0 | 1.1.2006 to 31.12.2008 |
| ex39019090 | 82 | Polyethylene modified with maleic anhydride, containing by weight not more than 4 % of maleic anhydride, for use in the manufacture of fuel tanks for motor vehicles | 0 | 1.1.2006 to 31.12.2008 |
| ex39019090 | 91 | Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid | 4 | 1.1.2006 to 31.12.2008 |
| ex39019090 | 92 | Chlorosulphonated polyethylene | 0 | 1.1.2006 to 31.12.2008 |
| ex39019090 | 93 | Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticiser in the manufacture of roof sheets | 0 | 1.1.2006 to31.12.2008 |
| ex39019090 | 94 | Mixtures of A-B block copolymer of polystyrene and ethylene-butylene copolymer and A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35 % of styrene | 0 | 1.1.2006 to 31.12.2008 |
| ex39019090ex39029090 | 9595 | Copolymer of ethylene and butylene, having hydroxyl or acrylate end-groups, containing by weight 40 % or more but not more than 60 % of butylene | 0 | 1.1.2006 to 31.12.2008 |
| ex39019090ex39029090ex39039090 | 969650 | Linear A-B block copolymer of polyisoprene, whether or not epoxidised, and either ethylene-butylene copolymer or styrene-ethylene-butylene copolymer, having hydroxyl end-groups | 0 | 1.1.2006 to 31.12.2008 |
| ex39019090 | 97 | Chlorinated polyethylene, in the form of powder | 0 | 1.1.2006 to 31.12.2008 |
| ex39021000 | 10 | Polypropylene containing no plasticiser and not more than:- 7 mg/kg of aluminium,
- 2 mg/kg of iron,
- 1 mg/kg of magnesium,
- 8 mg/kg of chloride
| 0 | 1.1.2006 to 31.12.2008 |
| ex39021000 | 20 | Polypropylene, containing no plasticiser,- of a melting point of more than 150 oC (as determined by the ASTM D 3417 method),
- of a heat of fusion of 15 J/g or more but not exceeding 70 J/g,
- of an elongation at break of 1000 % or more (as determined by the ASTM D 638 method),
- of a tensile modulus of 69 MPa or more but not exceeding 379 MPa (as determined by the ASTM D 638 method)
| 0 | 1.1.2006 to 31.12.2008 |
| ex39021000 | 30 | Polypropylene, containing not more than 1 mg/kg of aluminium, 0,05 mg/kg of iron, 1 mg/kg of magnesium and 1 mg/kg of chloride, for use in the manufacture of packaging for disposable contact lenses | 0 | 1.1.2006 to 31.12.2008 |
| ex39022000 | 10 | Polyisobutylene, of an average molecular weight (Mn) of 700 or more but not exceeding 800 | 0 | 1.1.2006 to 31.12.2008 |
| ex39023000ex39039090 | 9125 | A-B Block copolymer of polystyrene and an ethylene-propylene copolymer, containing by weight 40 % or less of styrene, in one of the forms mentioned in note 6(b) to Chapter 39 | 0 | 1.1.2006 to 31.12.2008 |
| ex39023000 | 94 | Chlorinated polypropylene, chemically modified with maleic anhydride, containing by weight 23 % or more but not more than 26 % of chlorine and less than 5 % of epoxy resin | 0 | 1.1.2006 to 31.12.2008 |
| ex39029090 | 92 | Polymers of 4-methylpent-1-ene | 0 | 1.1.2006 to 31.12.2008 |
| ex39029090 | 97 | Hydrogenated polyisobutene, in liquid form | 0 | 1.1.2006 to 31.12.2008 |
| ex39031900 | 20 | Polystyrene of a molecular weight (Mn) not exceeding 5000 | 0 | 1.1.2006 to 31.12.2008 |
| ex39039090 | 10 | Copolymer, entirely of styrene with maleic anhydride, or entirely of styrene with maleic anhydride and an acrylic monomer, whether or not containing a styrene-butadiene block copolymer, in one of the forms mentioned in note 6(b) to Chapter 39, for the manufacture of sheetings for head-liners for cars | 0 | 1.1.2006 to 31.12.2008 |
| ex39039090 | 15 | Copolymer, entirely of styrene with maleic anhydride, or entirely of styrene with maleic anhydride and an acrylic monomer, also partially esterified, of an average molecular weight (Mn) not exceeding 3000, in one of the forms mentioned in note 6(a) and (b) to Chapter 39 | 0 | 1.1.2006 to 31.12.2008 |
| ex39039090 | 20 | Copolymer of styrene with 2-ethylhexyl acrylate or with n-butyl acrylate, containing:- 10 mole % or more but not more than 16 mole % of acrylate,
- 0,2 mg/kg or less of sodium and
- 0,1 mg/kg or less of calcium
| 0 | 1.1.2006 to 31.12.2008 |
| ex39039090ex39119099 | 3530 | Copolymer of α-methylstyrene and styrene, having a softening point exceeding 113 oC | 0 | 1.1.2006 to 31.12.2008 |
| ex39039090ex39069090ex39119099 | 404050 | Copolymer of styrene with α-methylstyrene and acrylic acid, of a molecular weight (Mn) of 500 or more but not exceeding 6000 | 0 | 1.1.2006 to 31.12.2008 |
| ex39039090ex39069090 | 5545 | Copolymer of styrene, methyl methacrylate, butyl acrylate and either acrylic acid or hydroxyethyl methacrylate, of a molecular weight (Mn) of 500 or more but not exceeding 6000 | 0 | 1.1.2006 to 31.12.2008 |
| ex39039090 | 65 | Copolymer of styrene, butyl acrylate, butyl methacrylate, methyl methacrylate and acrylic acid, in the form of powder, containing by weight (81 ± 1) % of styrene, (6 ± 1) % of butyl acrylate, (5 ± 1) % of butyl methacrylate, (7 ± 1) % of methyl methacrylate and (1 ± 0,5) % of acrylic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex39039090 | 70 | Ammonium polystyrenesulfonate, in the form of an aqueous solution | 0 | 1.1.2006 to 31.12.2008 |
| ex39039090 | 75 | Copolymer of styrene and vinyl pyrrolidone, containing by weight not more than 1 % of sodium dodecyl sulfate, in the form of an aqueous emulsion, for the manufacture of goods of subheading 33052000 or of hair dyes of subheading 33059090 | 0 | 1.1.2006 to 31.12.2008 |
| ex39039090 | 80 | Granules of copolymer of styrene and divinylbenzene a minimum diameter of 150 μm and a maximum 800 μm and containing by weight :- minimum 65 % styrene,
- maximum 25 % divinylbenzene
for use in the manufacture of ion exchange resins | 0 | 1.1.2006 to 31.12.2008 |
| ex39042200ex39269098 | 9180 | Poly(vinyl chloride), dyed in the mass, in the form of flakes, grains, pebbles or rectangular chips, for use as decorative elements in floor and wall coverings | 0 | 1.1.2006 to 31.12.2008 |
| ex39043000 | 10 | Copolymer of vinyl chloride with vinyl acetate and maleic acid, containing by weight:- 81,5 % or more but not more than 84,5 % of vinyl chloride,
- 13,8 % or more but not more than 16,2 % of vinyl acetate and
- 0,8 % or more but not more than 1,2 % of maleic acid,
for the manufacture of goods of heading 3215 or for use in the manufacture of coatings for containers and closures of a kind used for preserving food and drink | 0 | 1.1.2006 to 31.12.2008 |
| ex39043000 | 20 | Copolymer of vinyl chloride with vinyl acetate and maleic acid, containing by weight:- 80,5 % or more but not more than 81,5 % of vinyl chloride,
- 16,5 % or more but not more than 17,5 % of vinyl acetate and
- 1,5 % or more but not more than 2,5 % of maleic acid,
for use in heat-sealing of plastics onto steel substrate for industrial uses | 0 | 1.1.2006 to 31.12.2008 |
| ex39044000 | 91 | Copolymer of vinyl chloride with vinyl acetate and vinyl alcohol, containing by weight:- 87 % or more but not more than 92 % of vinyl chloride,
- 2 % or more but not more than 9 % of vinyl acetate and
- 1 % or more but not more than 8 % of vinyl alcohol,
in one of the forms mentioned in note 6(a) or (b) to Chapter 39, for the manufacture of goods of heading 3215 or 8523 or for use in the manufacture of coatings for containers and closures of a kind used for preserving food and drink | 0 | 1.1.2006 to 31.12.2008 |
| ex39044000 | 92 | Copolymer of vinyl chloride, vinyl acetate, hydroxypropyl acrylate and maleic acid, containing by weight 80 % or more but not more than 83 % of vinyl chloride, 1,6 % or more but not more than 2 % of hydroxy groups and 0,25 % or more but not more than 0,38 % of carboxyl groups | 0 | 1.1.2006 to 31.12.2008 |
| ex39044000 | 93 | Copolymer of vinyl chloride and methyl acrylate, containing by weight (80 ± 1) % of vinyl chloride and (20 ± 1) % of methyl acrylate, in the form of a aqueous emulsion | 0 | 1.1.2006 to 31.12.2008 |
| ex39045090 | 91 | Copolymer of vinylidene chloride with vinyl chloride, containing by weight 79,5 % or more of vinylidene chloride, in one of the forms mentioned in note 6(a) or (b) to Chapter 39, for the manufacture of fibres, monofilament or strip | 0 | 1.1.2006 to 31.12.2008 |
| ex39046100 | 10 | Mixture of polytetrafluoroethylene and mica, in one of the forms mentioned in note 6(b) to Chapter 39 | 0 | 1.1.2006 to 31.12.2008 |
| ex39046100 | 20 | Copolymer of tetrafluoroethylene and trifluoro(heptafluoropropoxy)ethylene, containing 3,2 % or more but not more than 4,6 % by weight of trifluoro(heptafluoropropoxy)ethylene and less than 1 mg/kg of extractable fluoride ions | 0 | 1.1.2006 to 31.12.2008 |
| ex39046100 | 30 | Polytetrafluoroethylene, in the form of powder, of a specific surface of 8 m2/g or more but not exceeding 12 m2/g, a particle size distribution of 10 % of less than 10 μm and 90 % of less than 35 μm and an average particle size of 20 μm | 0 | 1.1.2006 to 31.12.2008 |
| ex39046990 | 92 | Copolymer of tetrafluoroethylene and trifluoro(trifluoromethoxy)ethylene | 0 | 1.1.2006 to 31.12.2008 |
| ex39046990 | 93 | Copolymer of ethylene with chlorotrifluoroethylene, in one of the forms mentioned in note 6(b) to Chapter 39 | 0 | 1.1.2006 to 31.12.2008 |
| ex39046990 | 94 | Copolymer of ethylene and tetrafluoroethylene | 0 | 1.1.2006 to 31.12.2008 |
| ex39046990 | 96 | Polychlorotrifluoroethylene, in one of the forms mentioned in note 6(a) and (b) to Chapter 39 | 0 | 1.1.2006 to 31.12.2008 |
| ex39046990 | 97 | Copolymer of chlorotrifluoroethylene and vinylidene difluoride | 0 | 1.1.2006 to 31.12.2008 |
| ex39052900 | 91 | Copolymer of vinyl acetate, dibutyl maleate and acrylic acid, in the form of a solution in isopropyl acetate and toluene | 0 | 1.1.2006 to 31.12.2008 |
| ex39059100 | 91 | Copolymer of N-vinylcaprolactam, N-vinyl-2-pyrrolidone and dimethylaminoethyl methacrylate | 0 | 1.1.2006 to 31.12.2008 |
| ex39059990 | 93 | Poly(vinyl acetate phthalate) | 0 | 1.1.2006 to 31.12.2008 |
| ex39059990 | 94 | Polymer of vinylpyrrolidone and dimethylaminoethyl methacrylate, containing by weight 97 % or more but not more than 99 % of vinylpyrrolidone, in the form of a solution in water | 0 | 1.1.2006 to 31.12.2008 |
| ex39059990 | 95 | Hexadecylated or eicosylated polyvinylpyrrolidone | 0 | 1.1.2006 to 31.12.2008 |
| ex39059990 | 96 | Polymer of vinyl formal, in one of the forms mentioned in note 6(b) to Chapter 39, of a molecular weight (Mw) of 25000 or more but not exceeding 150000 and containing by weight:- 9,5 % or more but not more than 13 % of acetyl groups evaluated as vinyl acetate and
- 5 % or more but not more than 6,5 % of hydroxy groups evaluated as vinyl alcohol
| 0 | 1.1.2006 to 31.12.2008 |
| ex39059990 | 97 | Povidone (INN)-iodine | 0 | 1.1.2006 to 31.12.2008 |
| ex39059990 | 98 | Poly(vinyl pyrrolidone) partially substituted by triacontyl groups, containing by weight 78 % or more but not more than 82 % of triacontyl groups | 0 | 1.1.2006 to 31.12.2008 |
| ex39061000 | 10 | Poly(methyl methacrylate), in the form of expansible beads containing 2-methylpentane as blowing agent | 0 | 1.1.2006 to 31.12.2008 |
| 39069060 | | Copolymer of methyl acrylate with ethylene and a monomer containing a non-terminal carboxy group as a substituent, containing by weight 50 % or more of methyl acrylate, whether or not mixed with silicon dioxide | 0 | 1.1.2006 to 31.12.2008 |
| ex39069090 | 10 | Polymerisation product of acrylic acid with small quantities of a polyunsaturated monomer, for the manufacture of medicaments of heading 3003 or 3004 | 0 | 1.1.2006 to 31.12.2008 |
| ex39069090 | 20 | Polymerisation product of acrylic acid with small quantities of a polyunsaturated monomer, for use as a stabilizer in emulsions or dispersions with a pH of more than 13 | 6 | 1.1.2006 to 31.12.2008 |
| ex39069090 | 30 | Copolymer of styrene with hydroxyethyl methacrylate and 2-ethylhexyl acrylate, of a molecular weight (Mn) of 500 or more but not exceeding 6000 | 0 | 1.1.2006 to 31.12.2008 |
| ex39069090 | 50 | Polymers of esters of acrylic acid with one or more of the following monomers in the chain:- chloromethyl vinyl ether,
- chloroethyl vinyl ether,
- chloromethylstyrene,
- vinyl chloroacetate,
- methacrylic acid,
- butenedioic acid monobutyl ester,
containing by weight not more than 5 % of each of the monomeric units, in one of the forms mentioned in note 6(b) to Chapter 39 | 0 | 1.1.2006 to 31.12.2008 |
| ex39069090 | 55 | Mixtures containing copolymers of methyl acrylate and ethylene and polyether-ester copolymers containing terephthalic acid, in the form of granules or pellets | 0 | 1.1.2006 to 31.12.2008 |
| ex39069090 | 60 | Copolymer of butyl acrylate and vinyl chloride, containing by weight (58 ± 1) % of butyl acrylate and (42 ± 1) % of vinyl chloride, in the form of a aqueous emulsion | 0 | 1.1.2006 to 31.12.2008 |
| ex39069090 | 70 | Copolymer of ethylene dimethacrylate with either methyl methacrylate or dodecyl methacrylate | 0 | 1.1.2006 to 31.12.2008 |
| ex39069090 | 75 | Copolymer of N-[4,5-dihydro-5-oxo-1-(2,4,6-trichlorophenyl)(1',4-bi-1H-pyrazol)-3-yl]= methacrylamide, butyl acrylate and styrene, in the form of powder | 0 | 1.1.2006 to 31.12.2008 |
| ex39069090 | 80 | Polydimethylsiloxane-graft-(polyacrylates; polymethacrylates) | 0 | 1.1.2006 to 31.12.2008 |
| ex39069090 | 85 | Non-aqueous dispersion type polymers of esters of acrylic acid with a hydrolyzable silyl group at one or both polymer ends | 0 | 1.1.2006 to 31.12.2008 |
| ex39072011 | 10 | Poly(ethylene oxide) of an average molecular weight (Mn) of 100000 or more | 0 | 1.1.2006 to 31.12.2008 |
| ex39072021 | 10 | Mixture, containing by weight 70 % or more but not more than 80 % of a polymer of glycerol and 1,2-epoxypropane and 20 % or more but not more than 30 % of a copolymer of dibutyl maleate and N-vinyl-2-pyrrolidone | 0 | 1.1.2006 to 31.12.2008 |
| ex39072029 | 10 | Polymer of dextrose, sorbitol and citric or phosphoric acid, containing by weight 90 % or more of dextrose monomer units | 0 | 1.1.2006 to 31.12.2008 |
| ex39072029 | 20 | Poly[oxy-1,4-phenyleneisopropylidene-1,4-phenyleneoxy-(2-hydroxytrimethylene)], of an average molecular weight (Mw) of more than 26000, in one of the forms mentioned in note 6 (b) to Chapter 39 | 0 | 1.1.2006 to 31.12.2008 |
| ex39072099 | 10 | Bis{2-[ω-hydroxy-poly(ethyleneoxy)]ethyl} hydroxymethylphosphonate | 0 | 1.1.2006 to 31.12.2008 |
| ex39072099 | 15 | Poly(oxypropylene) having alkoxysilyl end-groups | 0 | 1.1.2006 to 31.12.2008 |
| ex39072099 | 30 | Homopolymer of 1-chloro-2,3-epoxypropane (epichlorohydrin) | 0 | 1.1.2006 to 31.12.2008 |
| ex39072099 | 35 | Polyethylene glycol chemically modified with an isocyanate group containing a carbodiimide group, in the form of a solution in 2-methoxy-1-methylethyl acetate | 0 | 1.1.2006 to 31.12.2008 |
| ex39072099 | 40 | Polydimethylsiloxane grafted with a poly(ethylene oxide) having C20 and C22 fatty acids ester end-groups | 0 | 1.1.2006 to 31.12.2008 |
| ex39072099 | 45 | Copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy end-groups | 0 | 1.1.2006 to 31.12.2008 |
| ex39072099 | 50 | Copolymer of ethylene oxide and propylene oxide, having 2-aminopropyl end-groups | 0 | 1.1.2006 to 31.12.2008 |
| ex39073000 | 20 | Epoxyde resin in the form of powder, containing by weight 44 % or more but not more than 55 % of quartz and 0,5 % or more but not more than 1 % of diantimony trioxide, for the coating of film capacitors | 0 | 1.1.2006 to 31.12.2008 |
| ex39073000 | 30 | Epoxyde resin, without solvent, containing mineral fillers (silica), without glass fibre, of a specific weight at 25 oC of 1,55 g/cm3 or more but not exceeding 1,60 g/cm3 | 0 | 1.1.2006 to 31.12.2008 |
| ex39073000ex39169015ex39269098 | 401070 | Epoxide resin, containing by weight 70 % or more of silicon dioxide, for the encapsulation of goods of headings 8533, 8535, 8536, 8541, 8542 or 8548 | 0 | 1.1.2006 to 31.12.2008 |
| ex39074000 | 10 | Copolymer of hexane-1,6-diol, cyclohexane-1,4-dimethanol and ethylene carbonate | 0 | 1.1.2006 to 31.12.2008 |
| ex39076080 | 10 | Copolymer of terephthalic acid and isophthalic acid with ethylene glycol, butane-1,4-diol and hexane-1,6-diol | 0 | 1.1.2006 to 31.12.2008 |
| ex39076080 | 20 | Oxygen binding copolymer (as determined by the ASTM D 1434 and 3985 methods), obtained from benzenedicarboxylic acids, ethylene glycol and polybutadiene substituted by hydroxy groups | 0 | 1.1.2006 to 31.12.2008 |
| ex39079190 | 10 | Diallyl phthalate prepolymer, in the form of powder | 0 | 1.1.2006 to 31.12.2008 |
| ex39079919ex39079999 | 1010 | Poly(oxy-1,4-phenylenecarbonyl), in the form of powder | 0 | 1.1.2006 to 31.12.2008 |
| ex39079919 | 20 | Liquid crystal copolyester with a melting point of not less than 270 oC, whether or not containing fillers | 0 | 1.1.2006 to 31.12.2008 |
| ex39079919 | 30 | Poly(lactic acid) | 0 | 1.1.2006 to 31.12.2008 |
| ex39089000 | 10 | Poly(iminomethylene-1,3-phenylenemethyleneiminoadipoyl), in one of the forms mentioned in note 6(b) to Chapter 39 | 0 | 1.1.2006 to 31.12.2008 |
| ex39089000 | 20 | Copolymer consisting of hexamethylenediamine, isophthalic acid and terephthalic acid, in one of the forms mentioned in note 6(b) to Chapter 39 | 0 | 1.1.2006 to 31.12.2008 |
| ex39089000 | 30 | Reaction product of mixtures of octadecanecarboxylic acids polymerised with an aliphatic polyetherdiamine | 0 | 1.1.2006 to 31.12.2008 |
| ex39089000 | 40 | Thermoplastic polyamide resin having a fire point of more than 750 oC, for use in the manufacture of deflection yokes of cathode ray tubes | 0 | 1.1.2006 to 31.12.2008 |
| ex39094000 | 10 | Polycondensation product of phenol with formaldehyde, in the form of hollow spheres of a diameter of less than 150 μm | 0 | 1.1.2006 to 31.12.2008 |
| ex39100000 | 10 | 3-[(2-Aminoethyl)amino]propyl(methyl)cyclosiloxane | 0 | 1.1.2006 to 31.12.2008 |
| ex39100000 | 20 | Block copolymer of poly(methyl-3,3,3-trifluoropropylsiloxane) and poly[methyl(vinyl)siloxane] | 0 | 1.1.2006 to 31.12.2008 |
| ex39119019 | 10 | Poly(oxy-1,4-phenylenesulfonyl-1,4-phenyleneoxy-4,4'-biphenylene) | 0 | 1.1.2006 to 31.12.2008 |
| ex39119099 | 25 | Copolymer of vinyltoluene and α-methylstyrene | 0 | 1.1.2006 to 31.12.2008 |
| ex39119099 | 40 | Mixed calcium and sodium salt of a copolymer of maleic acid and methyl vinyl ether, having a calcium content of 9 % or more but not more than 16 % by weight | 0 | 1.1.2006 to 31.12.2008 |
| ex39119099 | 45 | Copolymer of maleic acid and methyl vinyl ether | 0 | 1.1.2006 to 31.12.2008 |
| ex39119099 | 55 | Solution containing:- (36 ± 0,5) % by weight of polyamide with lateral ester groups,
- (2 ± 0,5) % by weight of acrylic ester,
- (48 ± 0,5) % by weight of 1-methyl-2-pyrrolidone,
- (12 ± 0,5) % by weight of bis(2-methoxyethyl) ether,
- 500 μg/kg or less of potassium and
- 500 μg/kg or less of iron,
for use in the manufacture of goods of heading 8542 | 0 | 1.1.2006 to 31.12.2008 |
| ex39119099 | 60 | Hydrocarbon prepolymer, obtained by the reaction of cyclopentadiene and 1,3-pentadiene | 0 | 1.1.2006 to 31.12.2008 |
| ex39119099 | 65 | Calcium zinc salt of a copolymer of maleic acid and methyl vinyl ether | 0 | 1.1.2006 to 31.12.2008 |
| ex39119099ex39269098 | 7575 | Microspheres of a copolymer of divinylbenzene and styrene, of an average diameter of 220 μm or more but not exceeding 575 μm | 0 | 1.1.2006 to 31.12.2008 |
| ex39119099 | 80 | Poly[(8-methyl-8-methoxycarbonyltricyclo[5.2.1.02,6]decane-3,5-diyl)ethylene] | 0 | 1.1.2006 to 31.12.2008 |
| ex39119099 | 85 | Polymer of ethylene and styrene, cross-linked with divinylbenzene, in the form of a suspension | 0 | 1.1.2006 to 31.12.2008 |
| ex39121100 | 10 | Non-plasticised cellulose triacetate, in the form of flakes, for the manufacture of cellulose triacetate yarn | 0 | 1.1.2006 to 31.12.2008 |
| ex39123910 | 10 | Ethylcellulose, not plasticised | 0 | 1.1.2006 to 31.12.2008 |
| ex39123910 | 20 | Ethylcellulose, in the form of aqueous dispersion containing hexadecan-1-ol and sodium dodecyl sulfate, containing by weight (27 ± 3) % of ethylcellulose | 0 | 1.1.2006 to 31.12.2008 |
| ex39123980 | 10 | Cellulose, both hydroxyethylated and ethylated, insoluble in water | 0 | 1.1.2006 to 31.12.2008 |
| ex39123980 | 20 | Cellulose, both hydroxyethylated and alkylated with alkyl chain-lengths of 3 or more carbon atoms | 0 | 1.1.2006 to 31.12.2008 |
| ex39129010 | 10 | Cellulose acetate propionate, non-plasticised, in the form of powder:- containing by weight 25 % or more of propionyl (as determined by the ASTM D 817-72 method) and
- of a viscosity not exceeding 120 poise (as determined by the ASTM D 817-72 method),
for the manufacture of printing inks, paints, lacquers and other coatings, and reprographic coatings | 0 | 1.1.2006 to 31.12.2008 |
| ex39139000 | 92 | Protein, chemically modified by carboxylation and/or phthalic acid addition, having a molecular weight of 100000 to 300000 | 0 | 1.1.2006 to 31.12.2008 |
| ex39139000 | 95 | Chondroitinsulfuric acid, sodium salt | 0 | 1.1.2006 to 31.12.2008 |
| ex39139000 | 97 | Chitosonium pyrrolidonecarboxylate | 0 | 1.1.2006 to 31.12.2008 |
| ex39139000 | 98 | Sodium hyaluronate | 0 | 1.1.2006 to 31.12.2008 |
| ex39159090 | 10 | Waste, parings and scrap of photographic, cinematographic and radiographic films | 0 | 1.1.2006 to 31.12.2008 |
| ex39169090 | 10 | Composite profile shape, reinforced with glass fibres, produced by pultrusion, for the manufacture of window frames | 0 | 1.1.2006 to 31.12.2008 |
| ex39173210 | 10 | Flexible pipe of silicone foam, with continuous channels, of a Shore A hardness of 7 or more but not exceeding 48 and a density of 0,28 g/cm3 or more but not exceeding 0,92 g/cm3 | 0 | 1.1.2006 to 31.12.2008 |
| ex39173231ex39173299ex39269098 | 911045 | Assembly of heat-shrinkable tubing of polyethylene with poly(vinyl acetate), arranged in parallel at equally spaced intervals and attached at one or both ends by perforated plastic strips, in rolls | 0 | 1.1.2006 to 31.12.2008 |
| ex39173239 | 20 | Pipe consisting of a block copolymer of polytetrafluoroethylene and polyperfluoroalkoxytrifluoroethylene, of a length of not more than 600 mm, a diameter of not more than 85 mm and a wall-thickness of 30 μm or more but not exceeding 110 μm | 0 | 1.1.2006 to 31.12.2008 |
| ex39191019ex39191038ex39199038ex39209928 | 10201020 | Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film | 0 | 1.1.2006 to 31.12.2008 |
| ex39191031ex39191038ex39199031ex39206100 | 10305020 | Reflecting laminated sheet, consisting of a film of polycarbonate totally embossed on one side in a regular shaped pattern, covered on both sides with one or more layers of plastic material, whether or not covered on one side with an adhesive layer and a release sheet | 0 | 1.1.2006 to 31.12.2008 |
| ex39191038 | 10 | Self-adhesive tape of metallised polyurethane containing glass beads for use in the manufacture of marine life-saving equipment | 0 | 1.1.2006 to 31.12.2008 |
| ex39191038 | 40 | Double-sided, self-adhesive modified epoxy resin foil, put up in rolls, 16 cm wide, 140 to 200 m long and with a total thickness of 20 μm, not for retail sale | 0 | 1.1.2006 to 31.12.2008 |
| ex39191061ex39199061 | 9194 | Reflecting film, consisting of a layer of poly(vinyl chloride), a layer of alkyd polyester, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, only visible by means of a retroreflecting lighting, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film | 0 | 1.1.2006 to 31.12.2008 |
| ex39191069ex39199069 | 9196 | Black acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic pressure sensitive adhesive and a release sheet, of a peel adhesion at an angle of 90o of more than 25 N/cm (as determined by the ASTM D 3330 method) | 0 | 1.1.2006 to 31.12.2008 |
| ex39191069ex39199069 | 9598 | Reflecting laminated sheet showing a regular pattern, consisting of a film of poly(methylmethacrylate), followed by a layer of acrylic polymer containing microprisms, a film of poly(methylmethacrylate), an adhesive layer and a release sheet | 0 | 1.1.2006 to 31.12.2008 |
| ex39199010 | 10 | Shaped sheet of plastic, with an adhesive layer containing polyisobutylene and pectin, for the manufacture of colostomy bags | 0 | 1.1.2006 to 31.12.2008 |
| ex39199031 | 25 | Polyethylene terephthalate film:- laminated on one side with a copper mesh of a line width of 10 to 15 μm,
- a coloured adhesive layer on the other,
- coated on both sides with a protective film,
- with a total thickness of 110 to 210 μm
for use in the manufacture of optical filters | 0 | 1.1.2006 to 31.12.2008 |
| ex39199031 | 35 | Polyethylene terephthalate film, covered on one side with a tinted layer and on the other with an adhesive layer, coated on both sides with a protective film, with an overall thickness of 235 (± 5) μm, for the manufacture of optical filters | 0 | 1.1.2006 to 31.12.2008 |
| ex39199031ex39206219ex39206290ex39206300ex39206900 | 4020203030 | Reflecting polyester sheeting embossed in a pyramidal pattern, for the manufacture of safety stickers and badges, safety clothing and accessories thereof, or of school satchels, bags or similar containers | 0 | 1.1.2006 to 31.12.2008 |
| ex39199031 | 60 | Film consisting of 1 to 3 laminated layers of poly(ethylene terephthalate) and a copolymer of terephthalic acid, sebacic acid and ethylene glycol, coated on one side with an acrylic abrasion resistant coating and on the other side with an acrylic pressure sensitive adhesive, a water soluble methylcellulose coating and a poly(ethylene terephthalate) protective liner | 0 | 1.1.2006 to 31.12.2008 |
| ex39199031 | 70 | Poly(ethylene terephthalate) sheet, covered on one side with an antistatic layer and a hardcoat layer and on the other side with an adhesive layer and a release sheet, in rolls, for the manufacture of optical filters | 0 | 1.1.2006 to 31.12.2008 |
| ex39199061ex39199069 | 9292 | Poly(vinyl chloride) sheeting, of a thickness of less than 1 mm, coated with an adhesive in which are embedded glass balls of a diameter not exceeding 100 μm | 0 | 1.1.2006 to 31.12.2008 |
| ex39199061ex39199069ex39201089 | 939325 | Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 μm or more and an adhesive part of acrylic type of a thickness of 5 μm or more, for the protection of the surface of silicon discs | 0 | 1.1.2006 to 31.12.2008 |
| ex39199069ex39205100 | 9530 | Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 90 μm, whether or not covered on one side with an adhesive layer and a release sheet | 0 | 1.1.2006 to 31.12.2008 |
| ex39201026 | 20 | Film of polyethylene, of a thickness of 20 μm or more but not exceeding 45 μm, containing calcium carbonate in the mass, for the manufacture of napkins for babies or of sanitary towels or of tampons or of disposable surgical gowns | 0 | 1.1.2006 to 31.12.2008 |
| ex39201026ex39201089 | 3020 | Film of a thickness not exceeding 0,20 mm, of a blend of polyethylene and a copolymer of ethylene with oct-1-ene, embossed in a regular rhomboidal pattern, for coating both sides of a layer of unvulcanised rubber | 0 | 1.1.2006 to 31.12.2008 |
| ex39201026 | 40 | Film of polyethylene, of a kind used for typewriter ribbon | 0 | 1.1.2006 to 31.12.2008 |
| ex39201040 | 91 | Synthetic paper pulp, in the form of moist sheets, made from unconnected finely-branched polyethylene fibrils, whether or not blended with cellulose fibres in a quantity not exceeding 15 %, containing poly(vinyl alcohol) dissolved in water as the moistening agent | 0 | 1.1.2006 to 31.12.2008 |
| ex39201040 | 92 | Laminated sheet or strip consisting of a film composed of a blend of a copolymer of ethylene with vinyl acetate and a modified ethylene-propylene-elastomer (EPM) or a modified ethylene-propylene-diene elastomer (EPDM), coated or covered on both sides with a film of a copolymer of ethylene with vinyl acetate | 0 | 1.1.2006 to 31.12.2008 |
| ex39201089 | 35 | Reflecting film, consisting of a layer of polyethylene, a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, only visible by means of a retroreflecting lighting, and embedded glass beads and, on the other side, a hot-melt adhesive layer, covered on one side or on both sides with a release film | 0 | 1.1.2006 to 31.12.2008 |
| ex39202021 | 30 | Biaxially oriented polypropylene film with a coextruded layer of polyethylene on one side and a total thickness of 11,5 μm or more but not more than 13,5 μm. | 0 | 1.1.2006 to 31.12.2008 |
| ex39202029 | 91 | Mono-axial oriented film, consisting of three layers, each layer consisting of a mixture of polypropylene and a copolymer of ethylene and vinyl acetate, having:- a thickness of 55 μm or more but not exceeding 97 μm,
- a tensile modulus in the machine direction of 0,75 GPa or more but not exceeding 1,45 GPa and
- a tensile modulus in the transverse direction of 0,20 GPa or more but not exceeding 0,55 GPa
| 0 | 1.1.2006 to 31.12.2008 |
| ex39202090 | 91 | Synthetic paper pulp, in the form of moist sheets, made from unconnected finely-branched polypropylene fibrils, whether or not blended with cellulose fibres in a quantity not exceeding 15 %, containing poly(vinyl alcohol) dissolved in water as the moistening agent | 0 | 1.1.2006 to 31.12.2008 |
| ex39202090 | 92 | Laminated sheet or strip, consisting of a film of a thickness of 181 μm or more but not exceeding 223 μm composed of a blend of a copolymer of propylene with ethylene and a copolymer of styrene-ethylene-butylene-styrene (SEBS) coated or covered on one side with a layer of a copolymer of styrene-ethylene-butylene-styrene (SEBS) and a layer of polyester | 0 | 1.1.2006 to 31.12.2008 |
| ex39202090 | 93 | Polypropylene sheet, of a thickness of 0,5 mm or more but not exceeding 1,0 mm, having a tensile strength at break of 14,7 MPa or more but not exceeding 21 MPa (as determined by the ASTM D 638 method), in rolls of a width of 3,81 m | 0 | 1.1.2006 to 31.12.2008 |
| ex39203000 | 20 | Laminated sheet or strip, consisting of a film composed of a blend of a thermoplastic elastomer (TPE) of styrene-butadiene-styrene (SBS) with polyethylene or polypropylene, of a thickness of 100 μm or more but not exceeding 200 μm, coated or covered on both sides with a film of polypropylene of a thickness not exceeding 20 μm | 0 | 1.1.2006 to 31.12.2008 |
| ex39204310ex39204910 | 9191 | Reflecting sheeting, consisting solely of a single layer of poly(vinyl chloride), wholly embossed on one side in a regular pyramidal pattern | 0 | 1.1.2006 to 31.12.2008 |
| ex39204310 | 92 | Sheeting of poly(vinyl chloride), stabilised against ultraviolet rays, without any holes, even microscopic, of a thickness of 60 μm or more but not exceeding 80 μm, containing 30 or more but not more than 40 parts of plasticizer to 100 parts of poly(vinyl chloride) | 0 | 1.1.2006 to 31.12.2008 |
| ex39204310 | 93 | Poly(vinyl chloride) sheet, with relief printing, of a kind used in the templates for textile printing | 0 | 1.1.2006 to 31.12.2008 |
| ex39204310ex39204910 | 9493 | Film of a specular gloss of 70 or more, measured at an angle of 60o using a glossmeter (as determined by the ISO 2813: 2000 method), consisting of one or two layers of poly(vinyl chloride) coated on both sides with a layer of plastic, of a thickness of 0,26 mm or more but not exceeding 1,0 mm, covered on the gloss surface with a protective film of polyethylene, in rolls of a width of 1000 mm or more but not exceeding 1450 mm, for use in the manufacture of goods of heading 9403 | 0 | 1.1.2006 to 31.12.2008 |
| ex39204310ex39204910 | 9592 | Reflecting laminated sheet, consisting of a film of poly(vinyl chloride) and a film of an other plastic totally embossed in a regular pyramidal pattern, covered on one side with a release sheet | 0 | 1.1.2006 to 31.12.2008 |
| ex39204310 | 96 | Film, of a specular gloss of 70 or more measured at an angle of 60o using a glossmeter (as determined by the ISO 2813: 2000 method), consisting of a layer of poly(ethylene terephthalate) and a layer of colored poly(vinyl chloride), for coating panels and doors of a kind used in the manufacture of domestic appliances | 0 | 1.1.2006 to 31.12.2008 |
| ex39204310 | 97 | Film embossed to a depth of not more than 12 μm, of a specular gloss of 7 or more but not exceeding 17, measured at an angle of 60o using a glossmeter (as determined by the ISO 2813: 2000 method), consisting of at least two layers of poly(vinyl chloride), of a total thickness not exceeding 0,5 mm, covered on the embossed side with a protective film, in rolls of a width of 1400 mm or more but not exceeding 1420 mm, for use in the manufacture of goods of heading 9403 | 0 | 1.1.2006 to 31.12.2008 |
| ex39205100 | 10 | Poly(methyl methacrylate) plate, with an antistatic coating, of dimensions of 738 × 972 mm (± 1,5 mm) | 0 | 1.1.2006 to 31.12.2008 |
| ex39205100 | 20 | Plate of poly(methyl methacrylate) containing aluminium trihydroxide, of a thickness of 3,5 mm or more but not exceeding 19 mm | 0 | 1.1.2006 to 31.12.2008 |
| ex39206100 | 10 | Polycarbonate film of a thickness not exceeding 15 μm, for the manufacture of film capacitors | 0 | 1.1.2006 to 31.12.2008 |
| ex39206219ex39206219 | 0103 | Coextruded opaque sheet of poly(ethylene terephthalate), of a thickness of 50 μm or more but not exceeding 350 μm, consisting especially of a layer containing carbon black | 0 | 1.1.2006 to 31.12.2008 |
| ex39206219ex39206219 | 0406 | Poly(ethylene terephthalate) film, of a thickness of less than 11 μm, for the manufacture of audiodigital tapes for cassettes | 0 | 1.1.2006 to 31.12.2008 |
| ex39206219ex39206219 | 0709 | Poly(ethylene terephtalate) film, not coated with an adhesive, of a thickness not exceeding 25 μm, either:- only dyed in the mass, or
- dyed in the mass and metallised on one side
| 0 | 1.1.2006 to 31.12.2008 |
| ex39206219ex39206219 | 1113 | Film of poly(ethylene terephthalate) only, of a total thickness not exceeding 120 μm, consisting of one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material | 0 | 1.1.2006 to 31.12.2008 |
| ex39206219ex39206219 | 1416 | Poly(ethylene terephthalate) film, of a thickness of 20 μm or more but not exceeding 30 μm, coated on one side with silicone, for use in the manufacture of window film | 3 | 1.1.2006 to 31.12.2008 |
| ex39206219ex39206219 | 1719 | Laminated film of poly(ethylene terephthalate) only, of a total thickness not exceeding 120 μm, consisting of one layer which is metallised only and one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material | 0 | 1.1.2006 to 31.12.2008 |
| ex39206219ex39206219 | 2123 | Film of poly(ethylene terephthalate), coated or covered on one side or on both sides with a layer of modified polyester, of a total thickness of 7 μm or more but not exceeding 11 μm, for the manufacture of video tapes with a magnetic layer of metallic pigments and a width of 8 mm or of 12,7 mm | 0 | 1.1.2006 to 31.12.2008 |
| ex39206219ex39206219 | 2426 | Single ply film of poly(ethylene terephthalate) only, of a thickness not exceeding 120 μm, which only:- contains a colouring and/or UV-absorbing material throughout the mass and
- is metallised on one side,
whether or not coated on one or both sides with a vinyl acrylate polymer but having no other coating or adhesive | 0 | 1.1.2006 to 31.12.2008 |
| ex39206219ex39206219 | 2729 | Film of poly(ethylene terephthalate), of a total thickness not exceeding 120 μm, of a width of 100 mm or more but not exceeding 115 mm, coated on both sides with one or more layers containing different chemicals, for the manufacture of goods of subheading 3701 20 00 | 0 | 1.1.2006 to 31.12.2008 |
| ex39206219ex39206219 | 3133 | Film of poly(ethylene terephthalate), on one side metallised and coated with white ink and a protective layer and on the other side coated with a thermosensitive seal layer, of a width of 100 mm or more but not exceeding 150 mm, for the manufacture of goods of subheading 37012000 | 0 | 1.1.2006 to 31.12.2008 |
| ex39206219ex39206219 | 3436 | Film of poly(ethylene terephthalate), coated on one side with a layer of modified polyester, of a thickness of 20 μm (± 0,7 μm) or of 30 μm (± 0,9 μm), for the manufacture of audio magnetic tapes of a total thickness of 33 μm or more | 0 | 1.1.2006 to 31.12.2008 |
| ex39206219ex39206219 | 3739 | Poly(ethylene terephthalate) film, of a thickness not exceeding 12 μm, coated on one side with a layer of aluminium oxide of a thickness not exceeding 35 nm | 0 | 1.1.2006 to 31.12.2008 |
| ex39206219ex39206219 | 4143 | Poly(ethylene terephthalate) film, of a thickness of 18 μm or more but not exceeding 25 μm, having:- a shrinkage of ((3,4 ± 0,1) % in the machine direction (as determined by the ASTM D 1204 method) and
- a shrinkage of ((0,3 ± 0,2) % in the transverse direction (as determined by the ASTM D 1204 method)
| 0 | 1.1.2006 to 31.12.2008 |
| ex39206219ex39206219 | 4446 | Poly(ethylene terephthalate) film, of a thickness not exceeding 19 μm or of a weight of 20 g/m2 or more but not exceeding 26,7 g/m2, for use in the manufacture of photo-resist film | 0 | 1.1.2006 to 31.12.2008 |
| ex39206219ex39206219 | 4749 | Film of poly(ethylene terephthalate), coated on both sides with a layer of epoxy acrylic resin, of a total thickness of 37 μm (± 3 μm) | 0 | 1.1.2006 to 31.12.2008 |
| ex39206219ex39206219 | 5153 | Film of poly(ethylene terephthalate), coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness not exceeding 300 μm and having a surface resistivity not exceeding 10000 ohms (per square) (as determined by the ASTM D 257-93 method) | 0 | 1.1.2006 to 31.12.2008 |
| ex39206219ex39206219 | 5456 | Matt film of poly(ethylene terephthalate), of a specular gloss of 15 measured at an angle of 45o and 18 measured at an angle of 60o using a glossmeter (as determined by the ISO 2813: 2000 method) and a width of 1600 mm or more | 0 | 1.1.2006 to 31.12.2008 |
| ex39206219ex39206219 | 5759 | Film of white poly(ethylene terephthalate), dyed in the mass, of a thickness of 185 μm or more but not exceeding 253 μm, coated on both sides with an antistatic layer | 0 | 1.1.2006 to 31.12.2008 |
| ex39206219ex39206219 | 6163 | Film of a total thickness of 4,5 μm (± 0,16 μm), consisting of a biaxially-oriented poly(ethylene terephthalate) film, of an elastic modulus (in the machine direction) of 12 kg/mm2 (± 2 kg/mm2) and a tensile strength (in the machine direction) of more than 28 kg/mm2, and of an anti-adherent coating | 0 | 1.1.2006 to 31.12.2008 |
| ex39206219ex39206219 | 6769 | Poly(ethylene terephthalate) film, coated with among other a scratch resistant layer based on polyacrylate and a thermoadhesive layer, of a nominal width of 790 mm and a total thickness of 23 μm or more but not exceeding 26 μm | 0 | 1.1.2006 to 31.12.2008 |
| ex39206219ex39206900 | 7170 | Non-metallised reflecting film, consisting of outside layers of poly(ethylene terephthalate) or poly(ethylene naphthalate) and multiple layers of poly(methyl methacrylate), of a reflectance coefficient of 95 % or more (as determined by the ASTM E 1164-94 and ASTM E 387-95 methods) and a total thickness not exceeding 70 μm | 0 | 1.1.2006 to 31.12.2008 |
| ex39206219 | 72 | Non-metallised reflecting film, consisting of outside layers of poly(ethylene terephthalate) and multiple layers of poly(methyl methacrylate), of a total thickness of 51 μm (± 10 %), for use in the manufacture of laminated solar-reflecting automotive glass | 0 | 1.1.2006 to 31.12.2008 |
| ex39206219ex39206900 | 7340 | Iridescent film of polyester and poly(methyl methacrylate) | 0 | 1.1.2006 to 31.12.2008 |
| ex39206219ex39206219 | 7476 | Multilayer film of a thickness not exceeding 150 μm, consisting of a polyester film coated on one side with polycarbonate resin, metallised on the other side with titanium coated with polycarbonate resin and other layers containing N, N'-diphenyl-N, N'-di-m-tolylbiphenyl-4,4'-ylenediamine | 0 | 1.1.2006 to 31.12.2008 |
| ex39206219 | 88 | Laminated sheet, consisting of a biaxially oriented film of poly(ethylene terephthalate), covered on one side or on both sides with a layer of poly(ethylene terephthalate), for use in the manufacture of identity cards, credit cards and similar products (including "smart" cards) | 0 | 1.1.2006 to 31.12.2008 |
| ex39206290ex39206290 | 3133 | Film of poly(ethylene terephthalate), of a thickness of 500 μm (± 25 μm) | 0 | 1.1.2006 to 31.12.2008 |
| ex39206290 | 40 | Strips of poly(ethylene terephthalate), covered on both sides with a layer of chemically modified polyester, of a width not exceeding 16 mm and a thickness of 0,5 mm or more but not exceeding 2 mm, having a tensile strength at break of 0,7 GPa or more (as determined by the ASTM D 638 method) | 0 | 1.1.2006 to 31.12.2008 |
| ex39206900 | 20 | Film of poly(ethylene naphthalene-2,6-dicarboxylate) | 0 | 1.1.2006 to 31.12.2008 |
| ex39206900 | 50 | Polycondensation product of terephthalic acid with a mixture of cyclohex-1,4-ylenedimethanol and ethane-1,2-diol, in the form of a film | 0 | 1.1.2006 to 31.12.2008 |
| ex39206900 | 60 | Film of a copolymer of ethylene terephthalate and ethylene isophthalate, of a thickness not exceeding 2 μm | 0 | 1.1.2006 to 31.12.2008 |
| ex39209100 | 91 | Poly(vinyl butyral) film having a graduated coloured band | 3 | 1.1.2006 to 31.12.2008 |
| ex39209100 | 92 | Plasticised film of polyvinyl butyral, containing by weight:- either 14,5 % or more but not more than 17,5 % of dihexyl adipate,
- or 14,5 % or more but not more than 28,5 % of dibutyl sebacate
| 0 | 1.1.2006 to 31.12.2008 |
| ex39209100 | 93 | Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having the following characteristics:- a visible light transmission of 50 % or more,
- coated on one or both sides with a layer of poly(vinyl butyral) but not coated with an adhesive or any other material except poly(vinyl butyral),
- a total thickness not exceeding 0,2 mm without taking the presence of poly(vinyl butyral) into account,
for use in the manufacture of heat-reflecting or decorative laminated glass | 0 | 1.1.2006 to 31.12.2008 |
| ex39209928 | 10 | Reflecting sheet of metallised polyurethane, containing glass beads, coated with a hot-melt adhesive layer, covered on one or both sides with a release sheet, in rolls of a width of 1020 mm (± 20 mm), for slitting into safety clothing reflecting strip | 0 | 1.1.2006 to 31.12.2008 |
| ex39209928ex39219055ex74102100 | 301030 | Film of polyimide, not containing epoxyde resin and/or glass fibres,:- metallised by sputtering with copper on one side or on both sides,
- metallised by sputtering with copper and plated on one side or on both sides with refined copper or
- covered on one side or on both sides with a copper foil
| 0 | 1.1.2006 to 31.12.2008 |
| ex39209928 | 40 | Mono-axially oriented polymer film containing the following monomers:- Poly (tetramethylene ether glycol),
- Bis (4-isocyanotocyclohexyl) methane,
- 1,4-Butanediol or 1,3-Butanediol,
- with a thickness of 0,25 mm or more but not more than 5,0 mm,
- embossed with a regular pattern on one surface,
- and covered with a release sheet
| 0 | 1.1.2006 to 31.12.2008 |
| 39209953ex39209959 | 55 | Ion-exchange membranes of fluorinated plastic material | 0 | 1.1.2006 to 31.12.2008 |
| ex39209959 | 20 | Film entirely of poly(vinyl alcohol), of a thickness not exceeding 1 mm and containing by weight:- 2 % or less of unhydrolysed acetate groups evaluated as vinyl acetate and
- 5 % or more but not more than 25 % of glycerol as plasticiser,
for the manufacture of roof windows | 0 | 1.1.2006 to 31.12.2008 |
| ex39209959 | 25 | Poly(1-chlorotrifluoroethylene) film | 0 | 1.1.2006 to 31.12.2008 |
| ex39209959 | 30 | Film and sheet of a copolymer of ethylene with chlorotrifluoroethylene, of a thickness of 12 μm or more but not exceeding 400 μm | 0 | 1.1.2006 to 31.12.2008 |
| ex39209959 | 35 | Film entirely of poly(vinyl alcohol), of a thickness not exceeding 1 mm and of a width of 2,20 m or more, with an extension at break, in the transverse direction, of 350 % or more | 0 | 1.1.2006 to 31.12.2008 |
| ex39209959 | 40 | Biaxially-oriented film of poly(vinyl alcohol), coated on both sides, of a total thickness of less than 1 mm | 0 | 1.1.2006 to 31.12.2008 |
| ex39209959 | 45 | Iridescent film of polyester, polyethylene and an ethylene-vinyl acetate copolymer | 0 | 1.1.2006 to 31.12.2008 |
| ex39209959 | 50 | Polytetrafluoroethylene film, non-microporous, in the form of rolls, of a thickness of 0,019 mm or more but not exceeding 0,14 mm, impermeable to water vapour | 0 | 1.1.2006 to 31.12.2008 |
| ex39209959 | 60 | Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34 μm or more but not exceeding 90 μm, a tensile strength at break of 20 MPa or more but not exceeding 45 MPa and an elongation at break of 250 % or more but not exceeding 900 % | 0 | 1.1.2006 to 31.12.2008 |
| ex39211310 | 10 | Sheet of polyurethane foam, of a thickness of 3 mm (± 15 %) and of a specific gravity of 0,09435 or more but not exceeding 0,10092 | 0 | 1.1.2006 to 31.12.2008 |
| ex39211400 | 10 | Cellular film of regenerated cellulose, of a thickness not exceeding 350 μm | 0 | 1.1.2006 to 31.12.2008 |
| ex39211900 | 91 | Microporous polypropylene film of a thickness not exceeding 100 μm | 0 | 1.1.2006 to 31.12.2008 |
| ex39211900 | 92 | Microporous film consisting of mixtures of cellulose acetate and cellulose nitrate, of a thickness not exceeding 200 μm | 0 | 1.1.2006 to 31.12.2008 |
| ex39211900 | 93 | Strip of microporous polytetrafluoroethylene on a support of a non-woven, for use in the manufacture of filters for kidney dialysis equipment | 0 | 1.1.2006 to 31.12.2008 |
| ex39211900 | 94 | Polyethylene film, of a thickness of 16 μm or more but not exceeding 24 μm, having:- a weight of 19 g/m2 (± 2 g/m2),
- a water vapour transmission rate of 5000 g/m2 or more but not exceeding 30000 g/m2 per day (as determined by the ASTM D 6701-01 method),
- an elongation in the transverse direction of 25 % or more at a load of 500 g or less,
- an elongation in the machine direction of 50 % or more but not exceeding 100 % (as determined by the ASTM D 882-91 method),
for use in the manufacture of napkins and napkin liners for babies and similar sanitary articles | 0 | 1.1.2006 to 31.12.2008 |
| ex39211900 | 95 | Film of polyethersulfone, of a thickness not exceeding 200 μm | 0 | 1.1.2006 to 31.12.2008 |
| ex39211900 | 96 | Cellular film, consisting of a layer of polyethylene of a thickness of 90 μm or more but not exceeding 140 μm and a layer of regenerated cellulose of a thickness of 10 μm or more but not exceeding 40 μm | 0 | 1.1.2006 to 31.12.2008 |
| ex39219019 | 35 | Composite plate of polycarbonate and poly(butylene terephthalate), reinforced with glass fibres | 0 | 1.1.2006 to 31.12.2008 |
| ex39219019 | 45 | Composite plate of poly(ethylene terephthalate) or of poly(butylene terephthalate), reinforced with glass fibres | 0 | 1.1.2006 to 31.12.2008 |
| ex39219060ex54077100ex59039099 | 912010 | Woven polytetrafluoroethylene fabric, coated or covered with a copolymer of tetrafluoroethylene and trifluoroethylene having perfluorinated alkoxy side-chains ending in carboxylic acid or sulfonic acid groups, whether or not in the potassium or sodium salt form | 0 | 1.1.2006 to 31.12.2008 |
| ex39219060 | 92 | Reinforced polypropylene sheet, of a thickness of 0,91 mm or more but not exceeding 1,12 mm, having a breaking strength of 890 N or more but not exceeding 1500 N (as determined by the ASTM D 751 method), in rolls of a width of 3,81 m | 0 | 1.1.2006 to 31.12.2008 |
| ex39219060 | 93 | Film, of a specular gloss of 30 or more but not exceeding 60 measured at an angle of 60 o using a glossmeter (as determined by the ISO 2813: 2000 method), consisting of a layer of poly(ethylene terephthalate) and a layer of colored poly(vinyl chloride), joined by a metalised adhesive coating, for coating panels and doors of a kind used in the manufacture of domestic appliances | 0 | 1.1.2006 to 31.12.2008 |
| ex39219060 | 94 | Composite sheet containing an acrylic coating and laminated to a high-density polyethylene layer, of a total thickness of 0,8 mm or more but not exceeding 1,2 mm | 0 | 1.1.2006 to 31.12.2008 |
| ex39269091 | 20 | Reflecting sheeting or tape, consisting of a facing-strip of poly(vinyl chloride) embossed in a regular pyramidal pattern, heat-sealed in parallel lines or in a grid-pattern to a backing-strip of plastic material, or of knitted or woven fabric covered on one side with plastic material | 0 | 1.1.2006 to 31.12.2008 |
| ex39269098 | 10 | Microspheres of polymer of divinylbenzene, of a diameter of 4,5 μm or more but not exceeding 80 μm | 0 | 1.1.2006 to 31.12.2008 |
| ex39269098 | 15 | Glass fibre reinforced plastic traverse leaf spring for use in the manufacture of motor vehicle suspension systems | 0 | 1.1.2006 to 31.12.2008 |
| ex39269098 | 20 | Tape pad, for use in the manufacture of goods of heading 8523 | 0 | 1.1.2006 to 31.12.2008 |
| ex39269098 | 25 | Unexpansible microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate, of a diameter of 3 μm or more but not exceeding 4,6 μm | 0 | 1.1.2006 to 31.12.2008 |
| ex39269098 | 30 | Guide pin and pole, for use in the manufacture of goods of subheadings 85231100, 85231200 and 85231300 | 0 | 1.1.2006 to 31.12.2008 |
| ex39269098 | 35 | Microspheres of polyalkylsiloxane, on which are covalently bonded organic compounds, of a diameter of 1 μm or more but not exceeding 30 μm | 0 | 1.1.2006 to 31.12.2008 |
| ex39269098 | 55 | Flat product of polyethylene, perforated in opposing directions, of a thickness of 600 μm or more but not exceeding 1200 μm and of a weight of 21 g/m2 or more but not exceeding 42 g/m2 | 0 | 1.1.2006 to 31.12.2008 |
| ex40070000 | 10 | Siliconated vulcanised rubber thread and cord | 0 | 1.1.2006 to 31.12.2008 |
| ex40081100 | 10 | Blocks or sheets of cellular vulcanised rubber of modified ethylene-propylene-diene (EPDM) blended with chloroprene, which satisfy the Underwriters Laboratories Flammability Standard UL94HF-1 | 0 | 1.1.2006 to 31.12.2008 |
| ex40169999 | 20 | Soft rubber sealing stoppers for the manufacture of electrolytic capacitors | 0 | 1.1.2006 to 31.12.2008 |
| 41051010410510904105309141053099 | | Sheep or lambskin leather, without wool on, tanned or retanned but not further prepared, whether or not split, other than leather of heading 4114 | 0 | 1.1.2006 to 31.12.2008 |
| 410621104106219041062290 | | Goat or kidskin leather, without hair on, tanned or retanned but not further prepared, whether or not split, other than leather of heading 4114 | 0 | 1.1.2006 to 31.12.2008 |
| 41063110410631904106321041063290410640904106910041069200 | | Leather of other animals, without hair on, not further prepared than tanned, other than leather of heading 4114 | 0 | 1.1.2006 to 31.12.2008 |
| ex50040010ex50040090 | 1010 | Yarn spun entirely from silk, not put up for retail sale | 2.5 | 1.1.2006 to 31.12.2008 |
| ex50050010ex50050090 | 1010 | Yarn spun entirely from silk waste (noil), not put up for retail sale | 0 | 1.1.2006 to 31.12.2008 |
| 52081110 | | Fabrics for the manufacture of bandages, dressings and medical gauzes | 5.2 | 1.1.2006 to 31.12.2008 |
| ex54024100 | 10 | Polyamide yarn, not textured, untwisted or with a twist not exceeding 22 turns per metre, of crimpable bicomponent filaments consisting of poly(hexamethylene adipamide) with a copolyamide, for the manufacture of:- knee-length stockings of subheadings 61152011 and 61159330,
- women's stockings of subheadings 61152019 and 61159391 or
- panty hose (tights) of subheading 61151100
| 0 | 1.1.2006 to 31.12.2008 |
| ex54024100 | 20 | Yarn of synthetic textile fibres solely of aromatic polyamides obtained by the polycondensation of m-phenylenediamine and isophthalic acid | 0 | 1.1.2006 to 31.12.2008 |
| ex54024300 | 20 | Synthetic bicomponent filament yarn, not textured, untwisted, measuring 1650 decitex, consisting of 110 filaments each having a core of poly(ethylene terephthalate) and a skin of polyamide-6, containing by weight 75 % or more but not exceeding 77 % of poly(ethylene terephthalate), for use in the manufacture of roofings | 0 | 1.1.2006 to 31.12.2008 |
| ex54024999ex54026990 | 1020 | Multifilaments yarn of polytetrafluoroethylene | 0 | 1.1.2006 to 31.12.2008 |
| ex54024999 | 30 | Yarn of a copolymer of glycollic acid with lactic acid, for the manufacture of surgical sutures | 0 | 1.1.2006 to 31.12.2008 |
| ex54024999ex54025990ex54026990 | 502040 | Non-textured filament yarn of poly(vinyl alcohol) | 0 | 1.1.2006 to 31.12.2008 |
| ex54024999ex54026990 | 6010 | Yarn wholly of poly(glycollic acid) | 0 | 1.1.2006 to 31.12.2008 |
| ex54024999 | 70 | Synthetic filament yarn, single, containing by weight 85 % or more of acrylonitrile, in the form of a wick containing 1000 continuous filaments or more but not more than 25000 continuous filaments, of a weight per metre of 0,12 g or more but not exceeding 3,75 g and of a length of 100 m or more, for the manufacture of carbon-fibre yarn | 0 | 1.1.2006 to 31.12.2008 |
| ex54024999 | 80 | Polyethylene filament yarn, untwisted, of either 55, 110, 165 or 1760 decitex, for the manufacture of goods of heading 5607 | 0 | 1.1.2006 to 31.12.2008 |
| ex54024999 | 85 | Synthetic filament yarn, single, untwisted, wholly of poly(thio-1,4-phenylene) | 0 | 1.1.2006 to 31.12.2008 |
| ex54041090 | 10 | Monofilament of polytetrafluoroethylene | 0 | 1.1.2006 to 31.12.2008 |
| ex54041090 | 20 | Monofilament of poly(1,4-dioxanone) | 0 | 1.1.2006 to 31.12.2008 |
| ex54041090 | 30 | Monofilament of a copolymer of 1,3-dioxan-2-one with 1,4-dioxan-2,5-dione, for the manufacture of surgical sutures | 0 | 1.1.2006 to 31.12.2008 |
| ex54041090 | 40 | Monofilaments of a stabilised blend of polyester with polyurethane, of 67 decitex or more and of which no cross-sectional dimension exceeds 1 mm | 0 | 1.1.2006 to 31.12.2008 |
| ex54041090 | 50 | Monofilaments of polyester or poly(butylene terephthalate), with crosssectional dimension of 0,5mm or more but not exceeding 1mm, for use in the manufacture of zippers | 0 | 1.1.2006 to 31.12.2008 |
| ex54049090 | 20 | Strip of polyimide | 0 | 1.1.2006 to 31.12.2008 |
| ex54077100 | 10 | Woven fabrics of poly(vinyl alcohol) fibres, for machine embroidery | 0 | 1.1.2006 to 31.12.2008 |
| ex55019090 | 10 | Poly(vinyl alcohol) tow | 0 | 1.1.2006 to 31.12.2008 |
| ex55031010ex56013000 | 1040 | Synthetic staple fibres of a copolymer of terephthalic acid, p-phenylenediamine and 3,4'-oxybis(phenyleneamine), of a length not exceeding 7 mm | 0 | 1.1.2006 to 31.12.2008 |
| ex55039010ex55039090 | 1030 | Acetalised, multicomponent spun fibres with a matrix fibril structure, consisting of emulsion-polymerised poly(vinyl alcohol) and poly(vinyl chloride) | 0 | 1.1.2006 to 31.12.2008 |
| ex55039090ex55069090ex56013000 | 201010 | Poly(vinyl alcohol) fibres, whether or not acetalised | 0 | 1.1.2006 to 31.12.2008 |
| ex55039090 | 40 | Fibres wholly of poly(thio-1,4-phenylene) | 0 | 1.1.2006 to 31.12.2008 |
| ex56013000 | 20 | Polyester fibres, measuring 0,56 decitex, of a length of 3 mm or more but not exceeding 5 mm | 0 | 1.1.2006 to 31.12.2008 |
| ex56013000 | 30 | Acrylic fibres, measuring 0,11 and 0,56 decitex, of a length of 3 mm or more but not exceeding 5 mm | 0 | 1.1.2006 to 31.12.2008 |
| ex56031110ex56031190ex56031210ex56031290ex56039110ex56039190ex56039210ex56039290 | 1010101010101010 | Poly(vinyl alcohol) non-wovens, in the piece or cut into rectangles:- of a thickness of 200 μm or more but not exceeding 280 μm and
- of a weight of 20 g/m2 or more but not exceeding 50 g/m2
| 0 | 1.1.2006 to 31.12.2008 |
| ex56031110ex56031190ex56031210ex56031290 | 20202050 | Non-wovens, containing spunbonded fibres of polypropylene or of polypropylene and polyethylene, for the manufacture of napkins and napkin liners for babies and similar sanitary articles | 0 | 1.1.2006 to 31.12.2008 |
| ex56031290ex56031390ex56031490ex56039290ex56039390ex56039490 | 303010604030 | Non-wovens of aromatic polyamide fibres obtained by polycondensation of m-phenylenediamine and isophthalic acid, in the piece or cut into rectangles | 0 | 1.1.2006 to 31.12.2008 |
| ex56031290ex56031390 | 6060 | Non-woven of spunbonded polyethylene, of a weight of more than 60 g/m2 but not exceeding 80 g/m2 and an air resistance (Gurley) of 8 s or more but not exceeding 36 s (as determined by the ISO 5636/5 method) | 0 | 1.1.2006 to 31.12.2008 |
| ex56031290ex56031390ex56039290ex56039390 | 70704010 | Non-wovens of polypropylene, consisting of a meltblown layer, laminated on each side with spunbonded filaments of polypropylene, of a thickness not exceeding 550 μm and of a weight not exceeding 80 g/m2, in the piece or simply cut into squares or rectangles, not impregnated | 0 | 1.1.2006 to 31.12.2008 |
| ex56031390ex56031490 | 4020 | Non-wovens consisting of a central layer of polycarbonate fibres, laminated on each side with spunbonded filaments of polyester, of a weight of more than 130 g/m2 but not exceeding 200 g/m2 | 0 | 1.1.2006 to 31.12.2008 |
| ex56031390ex56039390 | 8030 | Polyethylene non-woven, covered on both sides with a non-woven of polypropylene and wood pulp, of a weight of 70 g/m2 or more but not exceeding 90 g/m2, in rolls, for use in the manufacture of wet wipes | 0 | 1.1.2006 to 31.12.2008 |
| ex56031490 | 30 | Non-wovens, consisting of a central elastomeric film laminated on each side with spunbonded filaments of polypropylene, of a weight of 200 g/m2 or more but not exceeding 300 g/m2 | 0 | 1.1.2006 to 31.12.2008 |
| ex56039190 | 30 | Non-woven viscose rayon, with a water-soluble starch based binder and having a weight of 12 or more but not more than 18 g/m2 | 0 | 1.1.2006 to 31.12.2008 |
| ex56039290ex56039390 | 2020 | Non-wovens consisting of a meltblown central layer of a thermoplastic elastomer laminated on each side with spunbonded filaments of polypropylene | 0 | 1.1.2006 to 31.12.2008 |
| ex56039290 | 50 | Non-wovens of staple fibres, in rolls, of a width of 78 mm or more but not exceeding 252 mm, for the manufacture of floppy discs | 0 | 1.1.2006 to 31.12.2008 |
| ex56039290ex56039390ex56039490 | 705040 | Non-wovens, consisting of multiple layers of a mixture of meltblown fibres and staple fibres of polypropylene and polyester, whether or not laminated on one side or on both sides with spunbonded filaments of polypropylene, of a total thickness not exceeding 50 mm | 0 | 1.1.2006 to 31.12.2008 |
| ex56039490 | 20 | Acrylic fibre rods, having a length of not more than 50 cm, for the manufacture of pen tips | 0 | 1.1.2006 to 31.12.2008 |
| ex56049000 | 60 | Strip, of:- a polyester layer, laminated on one or both sides to a polymer layer containing glass beads,
- a maximum width of 1,2 mm,
- a maximum thickness of 0,05 mm
| 0 | 1.1.2006 to 31.12.2008 |
| ex56075090 | 10 | Twine, unsterilised, wholly of poly(glycollic acid), plaited or braided, with an inner core, for the manufacture of surgical sutures | 0 | 1.1.2006 to 31.12.2008 |
| ex58031000 | 91 | Gauze of cotton, of a width of less than 1500 mm | 0 | 1.1.2006 to 31.12.2008 |
| ex59031090ex59032090ex59039099 | 101020 | Knitted or woven fabrics, coated or covered on one side with artificial plastic material in which are embedded microspheres | 0 | 1.1.2006 to 31.12.2008 |
| ex59032090 | 20 | Tape of polyester fabric laminated with a metallised polyurethane film containing glass beads, for use in the manufacture of marine life-saving equipment | 0 | 1.1.2006 to 31.12.2008 |
| ex59069990 | 10 | Rubberised textile fabric, consisting of warp yarns of polyamide-6,6 and weft yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4'-oxybis(phenyleneamine) | 0 | 1.1.2006 to 31.12.2008 |
| ex59070090 | 10 | Textile fabrics, coated with adhesive in which are embedded spheres of a diameter not exceeding 75 μm | 0 | 1.1.2006 to 31.12.2008 |
| ex59111000 | 10 | Needle-punched synthetic-fibre felts, not containing polyester, whether or not containing catalytic particles entrapped within the synthetic fibres, coated or covered on one side with polytetrafluoroethylene film, for the manufacture of filtration products | 0 | 1.1.2006 to 31.12.2008 |
| ex59119090 | 10 | Yarn and strip of impregnated polytetrafluoroethylene, whether or not oiled or graphited | 0 | 1.1.2006 to 31.12.2008 |
| ex59119090ex84219900 | 3092 | Parts of equipment for the purification of water by reverse osmosis, consisting essentially of plastic-based membranes, supported internally by woven or non-woven textile materials which are wound round a perforated tube, and enclosed in a cylindrical plastic casing of a wall-thickness not exceeding 4 mm, whether or not housed in a cylinder of a wall-thickness of 5 mm or more | 0 | 1.1.2006 to 31.12.2008 |
| 63051010 | | Sacks and bags, of a kind used for the packing of goods, used, of jute or of other textile bast fibres of heading 5303 | 0 | 1.1.2006 to 31.12.2008 |
| ex63059000ex63059000ex63059000 | 109395 | Sacks and bags, of a kind used for the packing of goods, used, of flax or of sisal | 0 | 1.1.2006 to 31.12.2008 |
| ex63079010 | 10 | Sterile mesh-implant, consisting of a knitted fabric of polypropylene monofilaments, with rounded edges, in forms covered by a square of dimensions not exceeding 31 × 31 cm | 0 | 1.1.2006 to 31.12.2008 |
| ex68139000 | 10 | Friction material, of a thickness of less than 20 mm, not mounted, for the manufacture of friction components of a kind used in automatic transmissions and clutches | 0 | 1.1.2006 to 31.12.2008 |
| ex69032090ex69149090 | 1010 | Yarn of continuous ceramic filaments, each filament containing by weight:- 12 % or more of diboron trioxide,
- 26 % or less of silicon dioxide and
- 60 % or more of dialuminium trioxide
| 0 | 1.1.2006 to 31.12.2008 |
| ex69039090ex69091900 | 1040 | Beryllium oxide, of a purity by weight of more than 99 %, in the form of blanks, bars, blocks or plates | 0 | 1.1.2006 to 31.12.2008 |
| ex69039090 | 20 | Silicon carbide reactor tubes and holders, of a kind used for insertion into diffusion and oxidation furnaces for production of semiconductor materials | 0 | 1.1.2006 to 31.12.2008 |
| ex69091200 | 20 | Plate, of dialuminium trioxide and titanium carbide, of dimensions not exceeding 48 × 48 mm, or of a diameter not exceeding 125 mm, for the manufacture of magnetic heads | 0 | 1.1.2006 to 31.12.2008 |
| ex69091900 | 30 | Supports for catalysts, consisting of porous cordierite or mullite ceramic pieces, of an overall volume not exceeding 65 l, having, per cm2 of the cross-section, not less than one continuous channel which may be open at both ends or stopped at one end | 0 | 1.1.2006 to 31.12.2008 |
| ex69091900ex69149090 | 5020 | Ceramic articles made of continuous filaments of ceramic oxides, containing by weight:- 2 % or more of diboron trioxide,
- 28 % or less of silicon dioxide and
- 60 % or more of dialuminium trioxide
| 0 | 1.1.2006 to 31.12.2008 |
| ex69091900 | 60 | Supports for catalysts, consisting of porous ceramic pieces, of a blend of silicon carbide and silicon, with a hardness of less than 9 on the Mohs scale, with a total volume not exceeding 65 litres, having per cm2 of the surface of the cross section one or more closed channels at the tail end | 0 | 1.1.2006 to 31.12.2008 |
| ex69149090 | 30 | Ceramic microspheres, transparent, obtained from silicon dioxide and zirconium dioxide, of a diameter of more than 125 μm | 0 | 1.1.2006 to 31.12.2008 |
| ex70021000 | 10 | Balls of E-glass, of a diameter of 20,3 mm or more but not exceeding 26 mm | 0 | 1.1.2006 to 31.12.2008 |
| ex70060090 | 10 | Glass plate, coated on one side with chromium and/or with a mixture of diindium trioxide and tin dioxide, of dimensions of 260 × 320 mm or more but not exceeding 400 × 400 mm, of a thickness not exceeding 1,2 mm, for the manufacture of liquid crystal displays | 0 | 1.1.2006 to 31.12.2008 |
| ex70060090 | 20 | Colour filter, consisting of a glass plate with red, blue and green pixels, having a total thickness of 1,1 mm (± 0,1 mm) and exterior dimensions of 320 × 352 mm or more but not exceeding 320 × 400 mm, for the manufacture of liquid crystal displays | 0 | 1.1.2006 to 31.12.2008 |
| ex70060090 | 30 | Glass plate, uncoated, of dimensions of 320 × 352 mm or more but not exceeding 320 × 400 mm, of a thickness of 0,6 mm or more but not exceeding 1,2 mm, for the manufacture of liquid crystal displays | 0 | 1.1.2006 to 31.12.2008 |
| ex70071920 | 10 | Glass plate of a diagonal size of 81,28 cm (± 1,5 cm) or more, but not exceeding 185,42 cm (± 1,5 cm), consisting of tempered glass; provided either with a mesh film and a near-infrared absorbing film or a sputtered conductive layer, with optional additional anti-reflex layer on one or two sides, for use in the manufacture of PDP videomonitors or television sets | 0 | 1.1.2006 to 31.12.2008 |
| ex70072900 | 10 | Glass plate of a diagonal size of 81,28 cm (+/- 1,5 cm) or more, but not exceeding 185,42 cm (+/- 1,5 cm), consisting of 2 sandwich plates laminated together; provided either with a mesh film and a near-infrared absorbing film or a sputtered conductive layer, with optional additional anti-reflex layer on one or two sides, for use in the manufacture of PDP videomonitors or television sets | 0 | 1.1.2006 to 31.12.2008 |
| ex70111000 | 10 | Glass lenses with a stippled front refractor or with a front refractor composed of prismatic elements, with an external diameter of more than 121 mm but not exceeding 125 mm | 0 | 1.1.2006 to 31.12.2008 |
| ex70111000ex70119000 | 2010 | Parabolic glass cup, with an external diameter of more than 121 mm but not exceeding 125 mm | 0 | 1.1.2006 to 31.12.2008 |
| ex70112000 | 25 | Glass cone for cathode-ray tube, of a diagonal measurement of 912 mm (± 5 mm) and a distance from seal edge to the end of the neck of 454,3 mm (± 5 mm) | 0 | 1.1.2006 to 31.12.2008 |
| ex70112000 | 40 | Glass face-plate:- with a diagonal measurement of 366,4 mm (± 1,5 mm) and of dimensions of 246,4 × 315,4 mm (± 1,5 mm),
- with a diagonal measurement of 391 mm (± 1,5 mm) and of dimensions of 261,4 × 326,8 mm (± 1,5 mm),
- with a diagonal measurement of 442 mm (± 1,5 mm) and of dimensions of 293,4 × 369,2 mm (± 1,5 mm),
- with a diagonal measurement of 544,5 mm (± 1,6 mm) and of dimensions of 358 × 454 mm (± 1,6 mm), having a cylindrical curvature,
- with a diagonal measurement of 570,5 mm (± 1,6 mm) and of dimensions of 360 × 486 mm (± 1,6 mm),
- with a diagonal measurement of 629,8 mm (± 3 mm) and of dimensions of 406,5 × 519 mm (± 2 mm), having a cylindrical curvature, or
- with a diagonal measurement of 753 mm (± 1,6 mm) and of dimensions of 471 × 640 mm (± 1,6 mm),
and with a raised edge, for the manufacture of colour cathode-ray tubes | 0 | 1.1.2006 to 31.12.2008 |
| ex70112000 | 75 | Glass face-plate:- with a diagonal measurement of 604,5 mm (± 3 mm) and of dimensions of 340 × 541 mm (± 2 mm),
- with a diagonal measurement of 639,3 mm (± 3 mm) and of dimensions of 413,6 × 527 mm (± 2 mm),
- with a diagonal measurement of 708 mm (± 3 mm) and of dimensions of 404 × 633 mm (± 2 mm),
- with a diagonal measurement of 723 mm (± 3 mm) and of dimensions of 477 × 602 mm (± 2 mm), or
- with a diagonal measurement of 812,8 mm (± 3 mm) and of dimensions of 463,8 × 725,5 mm (± 2 mm),
having a cylindrical curvature, for the manufacture of colour cathode-ray tubes | 0 | 1.1.2006 to 31.12.2008 |
| ex70112000 | 80 | Glass bulb for monochrome cathode-ray tube, of a diagonal measurement of 3,8 cm or more but not exceeding 51 cm and a nominal neck diameter of 13 mm, 20 mm, 29 mm or 37 mm | 0 | 1.1.2006 to 31.12.2008 |
| ex70140000 | 10 | Optical elements of glass (other than those of heading 7015), not optically worked, other than signalling glassware | 0 | 1.1.2006 to 31.12.2008 |
| ex70191200 | 10 | Rovings, measuring 2600 tex or more but not more than 3300 tex and of a loss on ignition of 4 % or more but not exceeding 8 % by weight (as determined by the ASTM D 2584-94 method) | 0 | 1.1.2006 to 31.12.2008 |
| ex70191200 | 15 | Rovings, measuring 650 tex or more but not more than 2500 tex, coated with a layer of polyurethane whether or not mixed with other materials | 0 | 1.1.2006 to 31.12.2008 |
| ex70191200 | 30 | Rovings, measuring 1693 tex (± 10 %), coated with a layer of styrene-butadiene rubber (SBR) | 0 | 1.1.2006 to 31.12.2008 |
| ex70191200 | 40 | Rovings, measuring 2040 tex (± 10 %), coated with carbon | 0 | 1.1.2006 to 31.12.2008 |
| ex70191200 | 50 | Rovings, measuring 392 tex or more but not more than 2884 tex, coated with a layer of an acrylic copolymer | 0 | 1.1.2006 to 31.12.2008 |
| ex70191200 | 60 | Rovings, measuring 517 tex or more but not more than 3569 tex, coated with a layer of paraffin | 0 | 1.1.2006 to 31.12.2008 |
| ex70191200 | 70 | Rovings, measuring 417 tex or more but not more than 3180 tex, coated with a layer of poly(sodium acrylate) and poly(acrylic acid) | 0 | 1.1.2006 to 31.12.2008 |
| ex70191910 | 10 | Yarn of 33 tex or a multiple thereof (± 7,5 %), obtained from continuous spun-glass filaments of a nominal diameter of 3,5 μm or of 4,5 μm, in which filaments of a diameter of 3 μm or more but not exceeding 5,2 μm predominate, other than those treated so as to improve their adhesion to elastomers | 0 | 1.1.2006 to 31.12.2008 |
| ex70191910 | 30 | Yarn of 22 tex (± 7,5 %), obtained from continuous spun-glass filaments of a nominal diameter of 5 μm, in which filaments of a diameter of 4,2 μm or more but not exceeding 5,8 μm predominate | 0 | 1.1.2006 to 31.12.2008 |
| ex70191910 | 40 | Yarn of 33, 34 or 51 tex or a multiple thereof (± 7,5 %), obtained from continuous spun-glass filaments of a nominal diameter of 6 μm, in which filaments of a diameter of 5,1 μm or more but not exceeding 6,9 μm predominate | 0 | 1.1.2006 to 31.12.2008 |
| ex70191910 | 50 | Yarn of E-glass of 68 or 74 tex (± 7 %), obtained from continuous spun-glass filaments of a nominal diameter of 9 μm, in which filaments of a diameter of 8,1 μm or more but not exceeding 9,9 μm predominate, for the manufacture of woven fabrics for electrical laminates (prepregs) | 0 | 1.1.2006 to 31.12.2008 |
| ex70193900 | 30 | Sheet, consisting of a layer of glass fibres and polypropylene, containing by weight 40 % or more but not more than 60 % of glass fibres of a length of 12,7 mm (± 0,2 mm) and a diameter of 16 μm (± 1 μm), covered on one side with a plastic film and on the other side with a plastic layer, of a total thickness not exceeding 1 mm | 0 | 1.1.2006 to 31.12.2008 |
| ex70193900 | 40 | Sheet, consisting of chopped glass fibres and thermoplastic polymer, containing by weight 30 % or more but not more than 70 % of glass fibres of a diameter of 16 μm (+/- 1 μm), whether or not covered on one or both sides with a protective plastic layer | 0 | 1.1.2006 to 31.12.2008 |
| ex70199010 | 10 | Non-textile glass fibres in which fibres of a diameter of less than 4,6 μm predominate | 0 | 1.1.2006 to 31.12.2008 |
| ex70199010 | 20 | Non-textile E-glass fibres, of a length not exceeding 3 mm and a diameter of 5 μm, for the manufacture of catalysts for the purification of smokes | 0 | 1.1.2006 to 31.12.2008 |
| ex70199099 | 10 | Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde resin and chlorosulfonated polyethylene | 0 | 1.1.2006 to 31.12.2008 |
| ex70199099 | 20 | Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde-vinylpyridine resin and an acrylonitrile-butadiene rubber (NBR) | 0 | 1.1.2006 to 31.12.2008 |
| ex71162090 | 10 | Disc of silicon on sapphire | 0 | 1.1.2006 to 31.12.2008 |
| 72025000 | | Ferro-silico-chromium | 0 | 1.1.2006 to 31.12.2008 |
| ex72029980 | 10 | Ferro-silicon, nitrided, containing by weight 55 % or more of silicon and 25 % or more of nitrogen | 0 | 1.1.2006 to 31.12.2008 |
| ex74091900 | 10 | Sheet or plate of polytetrafluoroethylene, with aluminium oxide or titanium dioxide as a filler or reinforced with glass-fibre fabric, laminated on both sides with copper foil | 0 | 1.1.2006 to 31.12.2008 |
| ex74102100 | 10 | Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with copper foil | 0 | 1.1.2006 to 31.12.2008 |
| ex74102100 | 40 | Sheet or plates- consisting of a central layer of paper, laminated on each side with glass-fibre fabric and impregnated with epoxide resin, or
- consisting of multiple layers of paper, impregnated with phenolic resin, coated on one or both sides with a copper film with a maximum thickness of 0,15 mm
| 0 | 1.1.2006 to 31.12.2008 |
| ex74199900ex76169990 | 9160 | Disc (target) with deposition material, consisting of molybdenum silicide:- containing 1 mg/kg or less of sodium and
- mounted on a copper or aluminium support
| 0 | 1.1.2006 to 31.12.2008 |
| ex74199900ex76169990 | 9270 | Disc (target) with deposition material, of tungsten or an alloy containing by weight 90 % of tungsten and 10 % of titanium:- containing 100 μg/kg or less of sodium and
- mounted on a copper or aluminium support
| 0 | 1.1.2006 to 31.12.2008 |
| ex74199900ex76169990 | 9380 | Disc (target) with deposition material, of titanium:- containing 50 μg/kg or less of sodium and
- mounted on a copper or aluminium support
| 0 | 1.1.2006 to 31.12.2008 |
| ex76051900 | 10 | Not alloyed aluminium wire, of a diameter of 2 mm or more but not exceeding 6 mm, covered with a layer of copper of a thickness of 0,032 mm or more but not exceeding 0,117 mm | 0 | 1.1.2006 to 31.12.2008 |
| ex76061110 | 20 | Tape of not alloyed aluminium, with a reflecting film, a transparent polyurethane topcoat, a netting and ceramic anti-skid particles | 0 | 1.1.2006 to 31.12.2008 |
| ex76061191ex76061193 | 2020 | Strip with depth-etching, of band-anodic oxidation treated aluminium of a purity by weight of 99,9 % and a thickness of less than 3 mm, for incorporation in bodies for motor vehicles | 0 | 1.1.2006 to 31.12.2008 |
| ex76130000ex87089998 | 2010 | Aluminium container, seamless, for compressed natural gas or compressed hydrogen, wholly embedded in an overwrap of epoxy-carbon fibres composite, of a capacity of 172 l (± 10 %) and an unfilled weight not exceeding 64 kg | 0 | 1.1.2006 to 31.12.2008 |
| ex76169990 | 15 | Honeycomb aluminium blocks of the type used in the manufacture of aircraft parts | 0 | 1.1.2006 to 31.12.2008 |
| ex76169990 | 50 | Discs of aluminium alloy, of a thickness not exceeding 0,84 mm, for the manufacture of goods of subheading 85232010 | 0 | 1.1.2006 to 31.12.2008 |
| ex79050000 | 10 | Plate of an alloy of zinc, ground and polished on one surface and coated with an epoxide resin on the other surface, of rectangular or square shape, of a length of 300 mm or more but not exceeding 2000 mm and of a width of 300 mm or more but not exceeding 1000 mm, and containing:- 10 mg/kg or less of iron,
- 10 mg/kg or less of lead,
- 700 mg/kg or more but not more than 900 mg/kg of aluminium and
- 500 mg/kg or more but not more than 900 mg/kg of magnesium,
for the manufacture of sensitised printing plates | 0 | 1.1.2006 to 31.12.2008 |
| ex81039090 | 10 | Welded tube solely of tantalum, or solely of an alloy of tantalum with tungsten containing by weight 3,5 % or less of tungsten | 0 | 1.1.2006 to 31.12.2008 |
| 81041100 | | Unwrought magnesium, containing at least 99,8 % by weight of magnesium | 0 | 1.1.2006 to 31.12.2008 |
| ex81049000 | 10 | Ground and polished magnesium sheets, of dimensions not exceeding 1500 × 2000 mm, coated on one side with an epoxy resin insensitive to light | 0 | 1.1.2006 to 31.12.2008 |
| ex81049000 | 20 | Sections, of extruded magnesium, of a length of 800 mm or more but not exceeding 2900 mm and a width of 15 mm or more but not exceeding 70 mm | 0 | 1.1.2006 to 31.12.2008 |
| ex81082000 | 10 | Titanium sponge | 0 | 1.1.2006 to 31.12.2008 |
| ex81083000 | 10 | Waste and scrap of titanium and titanium alloys, except those containing by weight 1 % or more but not more than 2 % of aluminium | 0 | 1.1.2006 to 31.12.2008 |
| ex81089050 | 10 | Alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, in sheets or rolls, of a thickness of 0,49 mm or more but not exceeding 3,1 mm, of a width of 1000 mm or more but not exceeding 1254 mm, for the manufacture of goods of subheading 87141900 | 0 | 1.1.2006 to 31.12.2008 |
| ex81089050 | 20 | Alloy of titanium, aluminium and vanadium, containing by weight 2,5 % or more but not more than 3,5 % of aluminium and 2,0 % or more but not more than 3,0 % of vanadium, in sheets or rolls, of a thickness of 0,6 mm or more but not exceeding 0,9 mm, of a width not exceeding 1000 mm, for the manufacture of goods of subheading 87141900 | 0 | 1.1.2006 to 31.12.2008 |
| ex81092000 | 10 | Non-alloy zirconium, in the form of ingots, containing by weight more than 0,01 % of hafnium, for use in the manufacture of tubes for the chemical industry | 0 | 1.1.2006 to 31.12.2008 |
| ex81101000 | 10 | Antimony in the form of ingots | 0 | 1.1.2006 to 31.12.2008 |
| ex81121900 | 10 | Beryllium, of a purity by weight of 94 % or more, in the form of bars, plates and sheets | 0 | 1.1.2006 to 31.12.2008 |
| ex81129930 | 10 | Alloy of niobium (columbium) and titanium, in the form of bars and rods | 0 | 1.1.2006 to 31.12.2008 |
| ex83099090 | 10 | Aluminium can ends with so-called "ring pull" full aperture with a diameter of 136,5 mm (± 1 mm) | 0 | 1.1.2006 to 31.12.2008 |
| ex84013000 | 20 | Non-irradiated hexagonal fuel modules (elements) for use in nuclear reactors | 0 | 1.1.2006 to 31.12.2008 |
| ex84073100 | 10 | Two stroke internal combustion engine, of a cylinder capacity not exceeding 30 cm3 for use in the manufacture of portable motorised scooters falling within subheading 87111000 | 0 | 1.1.2006 to 31.12.2008 |
| ex84079010 | 20 | Two-stroke internal combustion engines, having a cylinder capacity not exceeding 125 cm3, for the manufacture of lawnmowers of subheading 843311 | 0 | 1.1.2006 to 31.12.2008 |
| ex84089041 | 20 | Diesel engines of a power not exceeding 15 kW, with 2 or 3 cylinders, for use in the manufacture of vehicle mounted temperature control systems | 0 | 1.1.2006 to 31.12.2008 |
| ex84089043 | 20 | Diesel engines of a power not exceeding 30 kW, with 4 cylinders, for use in the manufacture of vehicle mounted temperature control systems | 0 | 1.1.2006 to 31.12.2008 |
| ex84143089 | 20 | Open shaft reciprocating compressor, for use in the manufacture of vehicle mounted temperature control systems | 0 | 1.1.2006 to 31.12.2008 |
| ex84145920 | 20 | Axial fan of 170 mm (± 10 mm) diameter and 50 mm (± 0,10 mm) height, for use in the manufacture of products of CN 8525 | 0 | 1.1.2006 to 31.12.2008 |
| ex84149000 | 20 | Aluminium pistons, partially covered with polytetrafluoroethylene, for incorporation into compressors of air conditioning machines of motor vehicles | 0 | 1.1.2006 to 31.12.2008 |
| ex84149000 | 30 | Pressure-regulating system, for incorporation into compressors of air conditioning machines of motor vehicles | 0 | 1.1.2006 to 31.12.2008 |
| ex84189990 | 91 | Welded cooling micro-elements, of an alloy of aluminium, for the manufacture of condensers | 0 | 1.1.2006 to 31.12.2008 |
| ex84191900 | 10 | Heat accumulator for motor vehicles, of a coolant capacity of 4 l or more but not exceeding 10 l | 0 | 1.1.2006 to 31.12.2008 |
| ex84198998 | 10 | Immersion-tube (coils) bundles, consisting of an assembly of plastic tubes terminating at each end in a honeycomb-structure (end-fitting) surrounded by a pipe-connector | 0 | 1.1.2006 to 31.12.2008 |
| ex84219900 | 91 | Parts of equipment, for the purification of water by reverse osmosis, consisting of a bundle of hollow fibres of artificial plastic material with permeable walls, embedded in a block of artificial plastic material at one end and passing through a block of artificial plastic material at the other end, whether or not housed in a cylinder | 0 | 1.1.2006 to 31.12.2008 |
| ex84219900 | 93 | Components of separators for the separation or purification of gases from gas mixtures, consisting of a bundle of permeable hollow fibres enclosed within a container, whether or not perforated, of an overall length of 300 mm or more but not exceeding 3700 mm and a diameter not exceeding 500 mm | 0 | 1.1.2006 to 31.12.2008 |
| ex84219900 | 95 | Parts of equipment for the filtration of magnetic dispersions, consisting essentially of nylon-6 fibres, enclosed in a plastic casing of a diameter of 70 mm (± 2 mm) and a length of 520 mm (± 5 mm) | 0 | 1.1.2006 to 31.12.2008 |
| ex84223000ex84798997 | 1030 | Machines and apparatus, other than injection moulding machines, for the manufacture of ink-jet printer cartridges | 0 | 1.1.2006 to 31.12.2008 |
| ex84399910ex84399990 | 1010 | Suction-roll shells, not drilled, in the form of alloy-steel tubes, of a length of 5207 mm or more and an external diameter of 754 mm or more, for use in machinery for making paper or paperboard | 0 | 1.1.2006 to 31.12.2008 |
| ex84543010 | 10 | Casting machines for casting under pressure of metal alloys in thixotropic (semi-solid) form | 0 | 1.1.2006 to 31.12.2008 |
| ex84559000 | 10 | Helical turn device for cold-rolling mill | 0 | 1.1.2006 to 31.12.2008 |
| ex84561090 | 10 | Machine-tool operating by laser beam, for the cutting of slots on the surface of a cylindrical tube for use in the manufacture of endo-vascular prosthesis (so-called "stents") | 0 | 1.1.2006 to 31.12.2008 |
| ex84734019 | 20 | Thermal printer head | 0 | 1.1.2006 to 31.12.2008 |
| ex84778099 | 10 | Machines for casting or for surface modification of plastic membranes of heading 3921 | 0 | 1.1.2006 to 31.12.2008 |
| ex84798997ex85011099 | 2078 | Motor, whether or not mounted on a baseplate, for use in the manufacture of products falling within subheading 85252020 or 85279020 | 0 | 1.1.2006 to 31.12.2008 |
| ex84818059 | 10 | Air control valve, consisting of a stepping motor and a valve pintle, for the regulation of idle air flow in fuel injection engines | 0 | 1.1.2006 to 31.12.2008 |
| ex84831095 | 20 | Integrally forged and roughly shaped generator and turbine shafts of a weight exceeding 215 tonnes | 0 | 1.1.2006 to 31.12.2008 |
| ex84834051 | 20 | Gear box, having a differential with wheel axle, for use in the manufacture of self-propelled lawnmowers with a seat of subheading 84331151 | 0 | 1.1.2006 to 31.12.2008 |
| ex84834059ex84834090 | 2020 | Hydrostatic speed changer, having a hydro pump and a differential with wheel axle, for use in the manufacture of self-propelled lawnmowers with a seat of subheading 84331151 | 0 | 1.1.2006 to 31.12.2008 |
| ex85011099 | 54 | DC motor, brushless, with an external diameter not exceeding 25,4 mm, a rated speed of 2260 (± 15 %) or 5420 (± 15 %) rpm, a supply voltage of 1,5 or 3 V | 0 | 1.1.2006 to 31.12.2008 |
| ex85011099 | 59 | DC stepping motor, with an angle of step of 1,8o (± 0,09o), a holding torque of 0,156 Nm or more, a coupling flange the exterior dimensions of which do not exceed 43 × 43 mm, a chuck of a diameter of 4 mm (± 0,1 mm), a two-phase winding and an output not exceeding 5 W | 0 | 1.1.2006 to 31.12.2008 |
| ex85011099 | 73 | DC motor, whether or not mounted on a baseplate, for use in the manufacture of products falling within subheading 84717050 | 0 | 1.1.2006 to 31.12.2008 |
| ex85011099 | 77 | DC motor, with brushes, with a typical running torque of 0,004 Nm (±0,001 Nm), with a coupling flange of a diameter of 32 mm (±0,5 mm) and a chuck of a diameter of 2 mm (±0,004 mm), with an internal rotor, a three-phase winding, a rated speed of 2800 (±10 %) rpm and a supply voltage of 12 V (±15 %) | 0 | 1.1.2006 to 31.12.2008 |
| ex85011099 | 79 | DC motor with brushes and an internal rotor with a three-phase winding, of a specified temperature range covering at least -20 oC to + 70 oC | 0 | 1.1.2006 to 31.12.2008 |
| ex85011099 | 81 | DC stepping motor, with an angle of step of 18o or more, a holding torque of 0,5 mNm or more, a coupling bracket the exterior dimensions of which do not exceed 22 x 68 mm, a two phase winding and an output not exceeding 5 W | 0 | 1.1.2006 to 31.12.2008 |
| ex85011099 | 82 | DC motor, brushless, with an external diameter not exceeding 29 mm, a rated speed of 1500 (±15 %) or 6800 (±15 %) rpm, a supply voltage of 2 or 8 V | 0 | 1.1.2006 to 31.12.2008 |
| ex85011099 | 83 | Multiphase DC motor, blushless, of a continuous output of 31W (+/- 5 W) calculated with 600 rpm, equipped with electronic circuit with sensor using Hall effect (electric power steering motor) | 0 | 1.1.2006 to 31.12.2008 |
| ex85024000 | 20 | Rotary converter, with a ferrite core, having coils with 2 or 6 windings and a diameter of 0,1 mm, connected to a flexible printed circuit | 0 | 1.1.2006 to 31.12.2008 |
| ex85030091ex85030099 | 3132 | Rotor, at the innerside provided with one or two magnetic rings whether or not incorporated in a steel ring | 0 | 1.1.2006 to 31.12.2008 |
| ex85030099 | 31 | Stamped collector of an electric motor, having an external diameter not exceeding 16 mm | 0 | 1.1.2006 to 31.12.2008 |
| ex85044090 | 20 | Direct current to direct current converter | 0 | 1.1.2006 to 31.12.2008 |
| ex85044090 | 30 | Static converter comprising a power switch with insulated-gate bipolar transistors (IGBTs), contained in a housing, for use in the manufacture of microwave ovens of subheading 85165000 | 0 | 1.1.2006 to 31.12.2008 |
| ex85045095 | 20 | Inductor with an inductance not exceeding 62 mH | 0 | 1.1.2006 to 31.12.2008 |
| ex85045095 | 30 | Multilayer monolithic inductors, contained in a housing of the SMD (surface mounted device) type the exterior dimensions of which do not exceed 1,8 x 3,4 mm, for use in the manufacture of products falling within subheading 85171100, 85252020 or 85279020 | 0 | 1.1.2006 to 31.12.2008 |
| ex85049011 | 10 | Ferrite cores, other than for deflection yokes | 0 | 1.1.2006 to 31.12.2008 |
| ex85049018 | 32 | Part of a rotary transformer, comprising a ferrite core provided with circular grooves with copper wire windings | 0 | 1.1.2006 to 31.12.2008 |
| ex85051100 | 31 | Ferrite magnet having a remanence of 455 mT (±15 mT) | 0 | 1.1.2006 to 31.12.2008 |
| ex85051100 | 33 | Neodymium-magnet discs with a diameter not exceeding 90 mm, whether or not containing a hole in the centre | 0 | 1.1.2006 to 31.12.2008 |
| ex85051990 | 31 | Neodymium-ferro ring with an external diameter not exceeding 13 mm, an internal diameter not exceeding 9 mm | 0 | 1.1.2006 to 31.12.2008 |
| ex85051990 | 32 | Magnet, for use in the manufacture of deflection yokes | 0 | 1.1.2006 to 31.12.2008 |
| ex85059010 | 91 | Solenoid with a plunger, operating at a nominal supply voltage of 24 V at a nominal DC of 0,08 A, for use in the manufacture of products falling within heading 8517 | 0 | 1.1.2006 to 31.12.2008 |
| ex85059010 | 92 | Electro-mechanical throttle plate actuator for automotive engines | 0 | 1.1.2006 to 31.12.2008 |
| ex85065090 | 10 | Lithium iodine single cell battery the dimensions of which do not exceed 9 × 23 × 45 mm and a voltage not exceeding 2,8 V | 0 | 1.1.2006 to 31.12.2008 |
| ex85065090 | 20 | Unit consisting of not more than 2 lithium batteries embedded in a socket for integrated circuits (battery-buffered socket), with not more than 32 connections and incorporating a control circuit | 0 | 1.1.2006 to 31.12.2008 |
| ex85065090 | 30 | Lithium-iodine or lithium-silver vanadium oxide single cell battery of dimensions not exceeding 28 x 45 x 15 mm and a capacity of not less than 1,05 Ah | 0 | 1.1.2006 to 31.12.2008 |
| ex85073020ex85078020ex85078030ex85078080 | 20202020 | Rectangular accumulator, with a length not exceeding 69 mm, a width not exceeding 36 mm and a thickness not exceeding 12 mm, for use in the manufacture of rechargeable batteries | 0 | 1.1.2006 to 31.12.2008 |
| ex85073020 | 30 | Cylindrical nickel-cadmium accumulator, with a length of 65,3 mm (±1,5 mm) and a diameter of 14,5 mm (±1 mm), having a nominal capacity of 1000 mAh or more, for use in the manufacture of rechargeable batteries | 0 | 1.1.2006 to 31.12.2008 |
| ex85078020 | 30 | Cylindrical nickel-hydride accumulator, of a diameter not exceeding 14,5 mm, for the manufacture of rechargeable batteries | 0 | 1.1.2006 to 31.12.2008 |
| ex85078030 | 30 | Cylindrical lithium-ion accumulator, with a length of 64,6 mm or more and a diameter of 18,1 mm or more, having a nominal capacity of 1200 mAh or more, for use in the manufacture of rechargeable batteries | 0 | 1.1.2006 to 31.12.2008 |
| ex85169000 | 31 | Dual diode, consisting of a power rectifying diode connected with a transformer protector diode through a wire, with a peak reverse power rate of 2 J or more, for use in the manufacture of products falling within subheading 85165000 | 0 | 1.1.2006 to 31.12.2008 |
| ex85169000 | 33 | Stainless steel soleplate with heating wire, for use in the manufacture of electric irons | 0 | 1.1.2006 to 31.12.2008 |
| ex85182995 | 20 | Loudspeaker having a power of 5 W and an impedance of 4 ohms, with a diameter not exceeding 50 mm, for use in the manufacture of portable phones | 0 | 1.1.2006 to 31.12.2008 |
| ex85183095 | 20 | Headphone and earphone for hearing aids, contained in a housing the exterior dimensions of which, excluding connecting points, do not exceed 5 × 6 × 8 mm | 0 | 1.1.2006 to 31.12.2008 |
| ex85184081 | 20 | Audio-frequency amplifier unit, comprising at least an audio-frequency amplifier, a static converter and a sound generator, for the manufacture of active loudspeaker boxes | 0 | 1.1.2006 to 31.12.2008 |
| ex85189000 | 91 | Integrally cold-upsetted steel coreplate, in the form of a disk on one side provided with a cylinder, for use in the manufacture of loudspeakers | 0 | 1.1.2006 to 31.12.2008 |
| ex85209000 | 20 | Drive-unit capable of magnetooptical signal recording and optical signal reproducing, comprising at least an optical unit, DC motors and a printed circuit on which are mounted integrated circuits providing drive and signal processing functions for reading optical discs having an external diameter not exceeding 70 mm, not comprising circuits with amplification functions or power supply drive functions | 0 | 1.1.2006 to 31.12.2008 |
| ex85229049 | 40 | Optical unit consisting of a laser diode with one photodiode, emitting light of a nominal wavelength of 780 nm, contained in a housing with a diameter of not more than 10 mm and a height of not more than 9 mm, with not more than 10 connections | 0 | 1.1.2006 to 31.12.2008 |
| ex85229049 | 50 | Electronic assembly for a laser read-head of a compact disc player, comprising:- a printed circuit,
- a photo-detector, in the form of a monolithic integrated circuit, contained in a housing,
- not more than 3 connectors,
- not more than 1 transistor,
- not more than 3 variable and 4 fixed resistors,
- not more than 5 capacitors,
the whole mounted on a support | 0 | 1.1.2006 to 31.12.2008 |
| ex85229049 | 60 | Printed circuit board mounted with electronic circuits operating at a voltage of 12 V, for use in the manufacture of television sets combined with video units | 0 | 1.1.2006 to 31.12.2008 |
| ex85229049 | 70 | Assembly, comprising at least a flexible printed circuit, a laser driver integrated circuit and a signal converter integrated circuit | 0 | 1.1.2006 to 31.12.2008 |
| ex85229080 | 30 | Thin-film recording and reproducing device, having at least 9 parallel channels for digital signals and at least 2 channels for analogue signals, to which a non-magnetic ceramic substrate is fixed, the whole rounded at one side, for use in the manufacture of magnetic heads for digital sound recording and digital/analogue sound reproducing apparatus of the cassette-type | 0 | 1.1.2006 to 31.12.2008 |
| ex85229080 | 35 | Cassette-deck sub-assembly for sound recording and reproducing apparatus, for use in the manufacture of telephone answering machines | 0 | 1.1.2006 to 31.12.2008 |
| ex85229080 | 40 | Sound reproducing assembly, comprising a tape deck mechanism of the cassette type, comprising a DC motor, for use in the manufacture of products falling within heading 8519 | 0 | 1.1.2006 to 31.12.2008 |
| ex85229080 | 45 | Roll for magnetic tape guiding and winding, for use in the manufacture of products falling within heading 8521 or 8522 | 0 | 1.1.2006 to 31.12.2008 |
| ex85229080 | 50 | Magnetic head for erasing video tapes, for use in the manufacture of products falling within heading 8521 or 8522 | 0 | 1.1.2006 to 31.12.2008 |
| ex85229080 | 55 | Assembly consisting of a driver circuit, a tacho-sensor and a brushless DC motor | 0 | 1.1.2006 to 31.12.2008 |
| ex85229080 | 60 | Analogue sound recording and reproducing assembly, comprising a record/playback head and a twin tape deck mechanism of the cassette type, not comprising circuits with amplification functions or power supply drive functions, for use in the manufacture of products falling within subheadings 8527<nbsp>31<nbsp>91 and 8527<nbsp>31<nbsp>98 | 0 | 1.1.2006 to 31.12.2008 |
| ex85229080 | 65 | Assembly for optical discs, comprising at least an optical unit and DC motors, capable or not of double layer recording | 0 | 1.1.2006 to 31.12.2008 |
| ex85229080 | 70 | Video tape recording/reproducing assembly comprising at least a motor and a printed circuit board containing integrated circuits with driver or control functions, whether or not incorporating a transformer, for use in the manufacture of products falling within heading 8521 | 0 | 1.1.2006 to 31.12.2008 |
| ex85229080 | 75 | Optical reading head for CD player, consisting of one laser diode, one photodetector integrated circuit and one beam splitter | 0 | 1.1.2006 to 31.12.2008 |
| ex85229080ex85489090 | 8045 | Laser optical drive unit assembly (so called mecha units) for the recording and/or reproduction of digital video and/or audio signals, comprising at least a laser optical reading and/or writing unit, one or more DC motors and not containing a printed circuit board or containing a printed circuit board not capable of signal processing for sounds and images, for use in the manufacture of products falling within headings 8519, 8520, 8521, 8526, 8527, 8528 or 8543 | 0 | 1.1.2006 to 31.12.2008 |
| ex85229080 | 85 | Video head drum, with video heads or with video and audio heads and an electric motor, for use in the manufacture of products falling within heading 8521 | 0 | 1.1.2006 to 31.12.2008 |
| ex85229080 | 90 | Magnetic head for playback of audio tapes, for use in the manufacture of products falling within heading 8519 | 0 | 1.1.2006 to 31.12.2008 |
| ex85253090 | 20 | Assembly for television cameras of dimensions not exceeding 10 × 15 × 18 mm, comprising an image sensor, an objective and a color processor, having an image resolution not exceeding 1024 × 1280 pixel, whether or not fitted with cable and/or housing, for the manufacture of goods of subheading 85252020 | 0 | 1.1.2006 to 31.12.2008 |
| ex85253090 | 30 | Compact chassis-type closed circuit television (CCTV) cameras, of a weight of not more than 250 g, contained in a housing of dimensions not exceeding 50 × 60 × 89,5 mm, with a single sensor charge-couple device (CCD), with effective pixels not exceeding 440000, for use in CCTV surveillance systems | 0 | 1.1.2006 to 31.12.2008 |
| ex85282190 | 20 | Liquid crystal display colour video monitor having a DC input voltage of 10 V or more but not exceeding 30 V or a fix DC input voltage of 12 V, with a diagonal measurement of the screen of 33,2 cm or less, suitable for the incorporation into goods of Chapters 84 to 90 and 94 | 0 | 1.1.2006 to 31.12.2008 |
| ex85282200 | 10 | Video monitor comprising:- a flat screen monochrome cathode-ray tube with a diagonal measurement of the screen not exceeding 110 mm and equipped with a deflector yoke, and
- a printed circuit on which are mounted a deflection unit, a video-amplifier and a transformer,
the whole mounted or not on a chassis, for the manufacture of video entry-phones, video telephones or surveillance apparatus | 0 | 1.1.2006 to 31.12.2008 |
| ex85291085 | 20 | Ceramic filter package comprising 2 ceramic filters and 1 ceramic resonator for a frequency of 10,7 MHz (± 30 kHz), contained in a housing | 0 | 1.1.2006 to 31.12.2008 |
| ex85291085 | 25 | Ceramic filter for a centre frequency of 10,7 MHz, with a bandwidth not exceeding 330 kHz at 3 dB and not exceeding 950 kHz at 20 dB, contained in a housing | 0 | 1.1.2006 to 31.12.2008 |
| ex85291085 | 30 | Ceramic filters for frequencies of 4,5 MHz or more but not exceeding 6,6 MHz contained in a housing | 0 | 1.1.2006 to 31.12.2008 |
| ex85291085 | 35 | Ceramic filter for a centre frequency of 450 kHz or more but not exceeding 470 kHz, with a bandwidth not exceeding 13 kHz at 3 dB, contained in a housing | 0 | 1.1.2006 to 31.12.2008 |
| ex85291085 | 40 | Ceramic filter for a frequency of 450 kHz, with a bandwidth not exceeding 18 kHz at 10 dB, contained in a housing | 0 | 1.1.2006 to 31.12.2008 |
| ex85291085 | 45 | Ceramic filter for a centre frequency of 455 kHz (± 1,5 kHz), with a bandwidth not exceeding 25 kHz at 6 dB and not exceeding 60 kHz at 40 dB, contained in a housing | 0 | 1.1.2006 to 31.12.2008 |
| ex85291085 | 50 | Ceramic filter for a centre frequency of 450 kHz (± 1,5 kHz) or 455 kHz (± 1,5 kHz), with a bandwidth not exceeding 30 kHz at 6 dB and not exceeding 70 kHz at 40 dB, contained in a housing | 0 | 1.1.2006 to 31.12.2008 |
| ex85291085 | 55 | Radio frequency (RF) signal isolator for frequencies of 890 MHz or more but not exceeding 1990 MHz, having an insertion loss not exceeding 0,7 dB, contained in a housing | 0 | 1.1.2006 to 31.12.2008 |
| ex85291085 | 60 | Filters, excluding surface acoustic wave filters, for a centre frequency of 485 MHz or more but not exceeding 1990 MHz with an insertion loss not exceeding 3,5 dB, contained in a housing | 0 | 1.1.2006 to 31.12.2008 |
| ex85291085 | 65 | Ceramic filter package, excluding surface acoustic wave filters, consisting of:- a transmit filter with a centre frequency of 1747,5 MHz and an insertion loss not exceeding 2,3 dB at a bandwidth of 75 MHzand
- a receive filter with a centre frequency of 1842,5 MHz and an insertion loss not exceeding 3,3 dB at a bandwidth of 75 MHz,
the whole contained in a housing | 0 | 1.1.2006 to 31.12.2008 |
| ex85291085 | 70 | Ceramic filter package, excluding surface acoustic wave filters, comprising 2 filters with one of the following combinations of characteristics:- a transmit centre frequency of 902,5 MHz, a receive centre frequency of 947,5 MHz and an insertion loss not exceeding 3,2 dB at a bandwidth of 25 MHzor
- a transmit centre frequency of 1747,5 MHz, a receive centre frequency of 1842,5 MHz and an insertion loss not exceeding 3,5 dB at a bandwidth of 75 MHz,
the whole contained in a housing | 0 | 1.1.2006 to 31.12.2008 |
| ex85291099 | 20 | Antenna switch, comprising:- a transmit filter with a centre frequency of 942,5 MHz or more but not exceeding 1990 MHz and
- a receive filter with a centre frequency of 847,5 MHz or more but not exceeding 1990 MHz,
the whole contained in a housing | 0 | 1.1.2006 to 31.12.2008 |
| ex85299060ex85489090 | 3044 | Parts of TV-apparatus, having microprocessor and video-processor functions, comprising at least a micro-controller and a video-processor, mounted on a leadframe and contained in a plastic housing | 0 | 1.1.2006 to 31.12.2008 |
| ex85299060 | 40 | Analogue sound recording and reproducing assembly, comprising a record/playback head, a single tape deck mechanism of the cassette type, a spindle electric motor, a rotation direction change mechanism and a chassis | 0 | 1.1.2006 to 31.12.2008 |
| ex85299060 | 50 | Tuner transforming high-frequency signals into mid-frequency signals, for use in the manufacture of television sets | 0 | 1.1.2006 to 31.12.2008 |
| ex85299081 | 32 | Optical unit for video projection, comprising a colour separation system, a positioning mechanism and lenses, for use in the manufacture of products falling within heading 8528 | 0 | 1.1.2006 to 31.12.2008 |
| ex85299081 | 34 | Assembly consisting of a lens unit, having an adjustable focal length of 4 mm or more but not exceeding 69 mm and comprising a zoom encoder, a stepping motor unit, a zoom motor unit, an iris motor unit and a photo interrupter | 0 | 1.1.2006 to 31.12.2008 |
| ex85299081 | 35 | Video recording and reproducing assembly, comprising a tape deck mechanism of the cassette type, comprising a DC motor, for use in the manufacture of products falling within heading 8525 | 0 | 1.1.2006 to 31.12.2008 |
| ex85299081 | 36 | Assembly consisting of a monochrome cathode-ray tube with a diagonal measurement of the screen of 143 mm or more but not exceeding 230 mm and a concave focus lens mounted on a liquid-filled cooling armature | 0 | 1.1.2006 to 31.12.2008 |
| ex85299081ex85299095 | 3740 | Filter, consisting of 2 piezo-electric crystals each with a frequency of 21 MHz or more but not exceeding 30 MHz and seperately mounted on a bracket, with not more than 7 connections | 0 | 1.1.2006 to 31.12.2008 |
| ex85299081 | 40 | Assembly comprising prisms, digital micromirror device (DMD) chips and electronic control circuits, for the manufacture of television projection equipments or video projectors | 0 | 1.1.2006 to 31.12.2008 |
| ex85299081 | 41 | Digital micromirror device (DMD)-chips, for use in the manufacture of video projectors | 0 | 1.1.2006 to 31.12.2008 |
| ex85299081 | 42 | Heat sinks and cooling fins of aluminium, for maintaining the operating temperature of transistors and integrated circuits in television sets | 0 | 1.1.2006 to 31.12.2008 |
| ex85299081 | 43 | Plasma display module incorporating only address and display electrodes, with or without driver and/or control electronics for pixel address only and with or without a power supply | 0 | 1.1.2006 to 31.12.2008 |
| ex85299081 | 44 | LCD modules, solely consisting of one or more TFT glass or plastic cells, not combined with touch screen facilities, with or without backlight unit, with or without inverters and one or more printed circuit boards with control electronics for pixel addressing only | 0 | 1.1.2006 to 31.12.2008 |
| ex85299095 | 50 | Video tape recording/reproducing assembly comprising at least a motor and a printed circuit board containing integrated circuits with driver or control functions, mounted on a printed circuit board containing at least integrated circuits for controlling the tape deck mechanism functions, video recording functions and TV-signal processing functions, for use in the manufacture of products falling within heading 8528 | 0 | 1.1.2006 to 31.12.2008 |
| ex85318095 | 20 | Indicator lamp, consisting of 4 light-emitting diodes made from silicon-cardide (SiC) semiconductor material, operating at a nominal wavelength of 481, 560 or 630 nm, contained in a housing | 0 | 1.1.2006 to 31.12.2008 |
| ex85318095 | 30 | Indicator lamp, consisting of 2 light-emitting diodes made from aluminium-gallium-arsenic (AlGaAs) or gallium-phosphor (GaP) semiconductor material, having a rectangular base, contained in a housing of the SMD (surface mounted device) type and having a lens | 0 | 1.1.2006 to 31.12.2008 |
| ex85318095 | 40 | Electro-accoustic transducer | 0 | 1.1.2006 to 31.12.2008 |
| ex85318095 | 50 | An electromagnetic display, consisting of 7 electromagnetic coils which by means of the residual magnetism in the stators provide that the last indication remains available (set state), and 7 pivoting light-reflecting segments each of which is attached to a bar magnet; assembly comprising such displays | 0 | 1.1.2006 to 31.12.2008 |
| ex85363030ex85363090ex85365080 | 113196 | Thermo-electric switch with a cut-off current of 50 A or more, comprising a snap action switch, for direct mounting on an electric motor coil, contained in a hermetically sealed housing | 0 | 1.1.2006 to 31.12.2008 |
| ex85364110ex85364190ex85364900 | 919191 | Thermal relays contained in a hermetically sealed glass cartridge not exceeding 35 mm in length excluding wires, with a maximum leakage rate of 10-6 cm3 He/sec at one bar in the temperature range 0 to 160 oC, to be incorporated into compressors for refrigerating equipment | 0 | 1.1.2006 to 31.12.2008 |
| ex85365011 | 31 | Switch of the printed circuit mount type, operating at a force of 4,9 N (±0,9 N), contained in a housing | 0 | 1.1.2006 to 31.12.2008 |
| ex85365011 | 32 | Mechanical tact switch for connecting electronic circuits, operating at a voltage not exceeding 60 V and at a current strength not exceeding 50 mA, for use in the manufacture of television sets | 0 | 1.1.2006 to 31.12.2008 |
| ex85365015 | 32 | Rotary switch in form of a wheel with a diameter of between 15 and 16 mm and contacts for closing the circuit, for a rated voltage of 12 V at 50 mA | 0 | 1.1.2006 to 31.12.2008 |
| ex85365019 | 91 | Hall effect switch, comprising 1 magnet, 1 Hall effect sensor and 2 capacitors, contained in a housing with 3 connections | 0 | 1.1.2006 to 31.12.2008 |
| ex85365019 | 92 | Hydraulic pressure switch, incorporating a pressure sensitive snap action disc, operating at a supply voltage of 6 V or more but not exceeding 18 V | 0 | 1.1.2006 to 31.12.2008 |
| ex85365019ex85365080 | 9397 | Devices, having adjustable controller and switching functions, comprising one ore more monolithic integrated circuits whether or not combined with semiconductor elements, mounted together on a leadframe and contained in a plastic housing | 0 | 1.1.2006 to 31.12.2008 |
| ex85365080 | 93 | Switch unit for coaxial cable, comprising 3 electromagnetic switches, with a switching time not exceeding 50 ms and an actuating current not exceeding 500 mA at a voltage of 12 V | 0 | 1.1.2006 to 31.12.2008 |
| ex85365080 | 95 | Reed switch having a switching power of 20 W or more within the range of 17 — 43 A.turn, in the form of a glass capsule, not containing mercury, the dimensions of which do not exceed 3 × 21 mm, for use in the manufacture of automotive airbag shock-sensors | 0 | 1.1.2006 to 31.12.2008 |
| ex85365080 | 98 | Mechanical push-button switch for connecting electronic circuits, operating at a voltage of 220 V or more but not exceeding 250 V and at a current strength not exceeding 5 A, for use in the manufacture of television sets | 0 | 1.1.2006 to 31.12.2008 |
| ex85369085 | 92 | Metallic stamped frame with connections | 0 | 1.1.2006 to 31.12.2008 |
| ex85369085 | 93 | Contact element with a hold-force of more than 3 N, in the form of 2 rectangular plastic frames interconnected by electric conductors | 0 | 1.1.2006 to 31.12.2008 |
| ex85369085ex85444980 | 9410 | Elastomeric connector, of rubber or silicone, consisting of one or more conductor elements | 0 | 1.1.2006 to 31.12.2008 |
| ex85371099 | 92 | Touch sensitive screen panel, consisting of a conductive grid between two glass or plastic plates or sheets, fitted with electric conductors and connectors | 0 | 1.1.2006 to 31.12.2008 |
| ex85371099 | 93 | Electronic control units for a voltage of 12 V, for use in the manufacture of vehicle mounted temperature control systems | 0 | 1.1.2006 to 31.12.2008 |
| ex85371099ex85438997 | 9420 | Unit consisting of two junction field effect transistors contained in a dual leadframe housing | 0 | 1.1.2006 to 31.12.2008 |
| ex85371099ex85438997 | 9525 | Unit consisting of two metal oxide semiconductor field effect transistors contained in a dual leadframe housing | 0 | 1.1.2006 to 31.12.2008 |
| ex85389099 | 92 | Part of an electrothermal fuse, consisting of a tin coated copper wire attached to a cylindrical casing, the exterior dimensions of which do not exceed 5 × 48 mm | 0 | 1.1.2006 to 31.12.2008 |
| ex85401111 | 91 | Colour cathode-ray tube with a slit or slot mask, equipped with electron guns placed side by side (in-line technology) and with a diagonal measurement of the screen of 12 cm or more but not exceeding 26 cm | 0 | 1.1.2006 to 31.12.2008 |
| ex85401111 | 93 | Colour cathode-ray tube, equipped with one gun with three rays and with a diagonal measurement of the screen of 19 cm or more but not exceeding 26 cm | 0 | 1.1.2006 to 31.12.2008 |
| ex85401113 | 91 | Colour cathode-ray tube with a slit or slot mask, having a distance between stripes of the same colour of less than 0,42 mm and a diagonal measurement of the screen of 49 cm, for use in the manufacture of professional video monitors including security and medical monitor applications | 0 | 1.1.2006 to 31.12.2008 |
| ex85401119 | 91 | Colour cathode-ray tube equipped with electron guns placed side by side (in-line technology), with a diagonal measurement of the screen of 85 cm or more | 0 | 1.1.2006 to 31.12.2008 |
| ex85401191 | 31 | Colour cathode-ray tube with a screen width/height ratio of 16/9 and a diagonal measurement of the screen of 39,8 cm (± 0,3 cm) | 0 | 1.1.2006 to 31.12.2008 |
| ex85401200 | 82 | Monochrome cathode-ray tube with a diagonal measurement of the screen of 250 mm or more but not exceeding 320 mm and an anode voltage of 18 kV or more but not exceeding 22 kV | 0 | 1.1.2006 to 31.12.2008 |
| ex85401200 | 83 | Monochrome cathode-ray tube, with a diagonal measurement of the screen of 150 mm or more but not exceeding 182 mm, a neck diameter of less than 30 mm and an anode voltage of 25 kV or more but not exceeding 32 kV | 0 | 1.1.2006 to 31.12.2008 |
| ex85401200 | 84 | Flat screen monochrome cathode-ray tube, with a diagonal measurement of the screen not exceeding 102 mm | 0 | 1.1.2006 to 31.12.2008 |
| ex85402080 | 91 | Photomultiplier consisting of a photocathode tube with 9 dynodes, for light of a wavelength of 160 nm or more but not exceeding 930 nm, of a diameter not exceeding 14 mm and a height not exceeding 94 mm | 0 | 1.1.2006 to 31.12.2008 |
| ex85404000ex85406000 | 3131 | Colour cathode-ray tube with a dot mask, equipped with 3 electron guns placed side by side (in-line technology) or 1 gun with 3 rays, with a diagonal measurement of the screen of more than 72 cm and a distance of less than 0,5 mm between dots of the same colour | 0 | 1.1.2006 to 31.12.2008 |
| ex85404000ex85406000 | 3232 | Colour cathode-ray tube with a dot mask, equipped with 3 electron guns placed side by side (in-line technology) or 1 gun with 3 rays, having a diagonal measurement of the screen not exceeding 72 cm | 0 | 1.1.2006 to 31.12.2008 |
| ex85404000 | 33 | Colour cathode-ray tube with a slit or slot mask, having a distance between stripes of the same colour of less than 0,35 mm and a diagonal measurement of the screen not exceeding 53 cm | 0 | 1.1.2006 to 31.12.2008 |
| ex85404000 | 34 | Colour cathode-ray tube with a slit or slot mask, having a distance between stripes of the same colour of less than 0,39 mm and a diagonal measurement of the screen of 33 cm or more but not exceeding 38 cm | 0 | 1.1.2006 to 31.12.2008 |
| ex85404000 | 35 | Colour cathode-ray tube with a slit or slot mask, having a distance between stripes of the same colour of less than 0,35 mm and a diagonal measurement of the screen not exceeding 72 cm, for use in the manufacture of monitors | 0 | 1.1.2006 to 31.12.2008 |
| ex85404000 | 36 | Colour cathode-ray tube with a slit or slot mask, having a distance between stripes of the same colour of less than 0,30 mm and a diagonal measurement of the screen not exceeding 58 cm | 0 | 1.1.2006 to 31.12.2008 |
| ex85405000ex85406000 | 3133 | Flat screen monochrome cathode-ray tube, with a diagonal measurement of the screen of 142 mm or more but not exceeding 190 mm, a luminescence of 300 lumen or more but not exceeding 2000 lumen, a resolution of 0,06 mm or more but not exceeding 0,1 mm, phosphor types P1 or P22 or P53 or P55 or P56, an anode voltage of more than 34 kV, a focus voltage of more than 7 kV and a cathode current of 3 mA or more | 0 | 1.1.2006 to 31.12.2008 |
| ex85405000ex85406000 | 3234 | Monochrome cathode-ray tube with a diagonal measurement of the screen of 176 mm or more but not exceeding 520 mm and a neck diameter not exceeding 21 mm | 0 | 1.1.2006 to 31.12.2008 |
| ex85407100 | 20 | Continuous wave magnetron with a fixed frequency of 2460 MHz, packaged magnet, probe output, for use in the manufacture of products falling within subheading 85165000 | 0 | 1.1.2006 to 31.12.2008 |
| ex85408900 | 91 | Displays in the form of a tube consisting of a glass housing mounted on a board the dimensions of which do not exceed 300 mm × 350 mm excluding leads. The tube contains one or more rows of characters or lines arranged in rows, each character or line consisting of fluorescent or phosphorescent elements. These elements are mounted on a metallised base which is covered with fluorescent substances or phosphorescent salts which give off light when bombarded with electrons | 0 | 1.1.2006 to 31.12.2008 |
| ex85408900 | 92 | Vacuum fluorescent display tube | 0 | 1.1.2006 to 31.12.2008 |
| ex85409100 | 31 | Electron gun, for use in the manufacture of colour cathode-ray tubes of subheading 85404000 with a diagonal measurement of the screen of 34 cm or more but not exceeding 39 cm | 0 | 1.1.2006 to 31.12.2008 |
| ex85409100 | 32 | Electron gun of colour cathode-ray tubes with an anode voltage of 27,5 kV or more but not exceeding 36 kV | 0 | 1.1.2006 to 31.12.2008 |
| ex85409100 | 36 | Flat masks, with:I.-a width of 592,8 mm (+/- 0,5 mm)II.-a height of 463,1 mm (+/- 0,5 mm)III.-a thickness of 250 μm (+/- 10 μm)IV.-a width of the apertures in the centre of 180 μm (+/- 8 μm)V.-a width of the apertures at the edge of 210 μm (+/- 8 μm) | 0 | 1.1.2006 to 31.12.2008 |
| ex85409100 | 92 | Slit or slot mask, excluding masks with continuously vertical slits, with a diagonal measurement of 39 cm or less | 0 | 1.1.2006 to 31.12.2008 |
| ex85409100 | 93 | Electron gun for the production of monochrome cathode-ray tubes with a diagonal measurement of the screen of 7,6 cm or more but not exceeding 30,5 cm | 0 | 1.1.2006 to 31.12.2008 |
| ex85409100 | 96 | Assembly for cathode-ray tubes with 2 or more but not more than 6 coils, a plastic support and a metal fixing ring, for the adjustment of display sharpness and/or convergence | 0 | 1.1.2006 to 31.12.2008 |
| ex85409100 | 97 | Slit mask, consisting of continuously vertical slits measuring more than 275 mm in the length | 0 | 1.1.2006 to 31.12.2008 |
| ex85409100 | 98 | Frame of molybdenum chrome steel, for use in the manufacture of cathode-ray tubes | 0 | 1.1.2006 to 31.12.2008 |
| ex85409900 | 91 | Anode, cathode or output part, or an assembly comprising these components (magnetron core tube), for the manufacture of magnetrons of subheading 85407100 | 0 | 1.1.2006 to 31.12.2008 |
| ex85431900 | 10 | Electron beam accelerator systems, with an operating voltage not exceeding 1,5 MV and a beam current not exceeding 70 mA | 0 | 1.1.2006 to 31.12.2008 |
| ex85438997 | 30 | Amplifier, consisting of active and passive elements mounted on a printed circuit, contained in a housing | 0 | 1.1.2006 to 31.12.2008 |
| ex85438997 | 35 | Radio frequency (RF) modulator, operating with a frequency range of 43 MHz or more but not exceeding 870 MHz, capable of switching VHF and UHF signals, consisting of active and passive elements mounted on a printed circuit, contained in a housing | 0 | 1.1.2006 to 31.12.2008 |
| ex85438997 | 40 | Rectifier assembly of power barrier diodes, consisting of 2 diodes with an average forward current not exceeding 600 A and a repetitive reverse peak voltage not exceeding 40 V, each contained in a housing and connected by a common cathode | 0 | 1.1.2006 to 31.12.2008 |
| ex85438997 | 45 | Piezo-electric crystal oscillator with a fixed frequency, within a frequency range of 1,8 MHz to 67 MHz, contained in a housing | 0 | 1.1.2006 to 31.12.2008 |
| ex85438997 | 50 | Mechanical vibratory gyroscope driven by a 25 or 26 kHz oscillator, comprising a differential amplifier and a detector circuit, contained in a housing | 0 | 1.1.2006 to 31.12.2008 |
| ex85438997 | 55 | Opto-electronic circuit comprising one or more light-emitting diodes (LEDs), whether or not equipped with an integrated driving circuit, and one photodiode with amplifier circuit, whether or not with an integrated logic gate arrays circuit or one or more light-emitting diodes and at least 2 photodiodes with an amplifier circuit, whether or not with an integrated logic gate arrays circuit or other integrated circuits, contained in a housing | 0 | 1.1.2006 to 31.12.2008 |
| ex85438997 | 60 | Oscillator, with a centre frequency of 20 GHz or more but not exceeding 42 GHz, consisting of active and passive elements not mounted on a substrate, contained in a housing | 0 | 1.1.2006 to 31.12.2008 |
| ex85438997 | 65 | Audio recording and reproducing circuit, capable of stereo audio data storage and simultaneous record and playback, comprising 2 or 3 monolithic integrated circuits mounted on a printed circuit or a leadframe, contained in a housing | 0 | 1.1.2006 to 31.12.2008 |
| ex85438997 | 70 | Overvoltage suppression assembly, comprising 8 diodes, having a reverse stand-off voltage not exceeding 4,5 V, a reverse leakage current not exceeding 10 μA, a peak pulse current not exceeding 30 A and a nominal capacitance of 50 pF, contained in a housing | 0 | 1.1.2006 to 31.12.2008 |
| ex85438997 | 75 | Charged coupled device (CCD) scanner assembly, for a real-time film scanning system, having optical functions, illumination functions and signal processing functions | 0 | 1.1.2006 to 31.12.2008 |
| ex85438997 | 80 | Temperature compensated oscillator, comprising a printed circuit on which are mounted at least a piezo-electric crystal and an adjustable capacitor, contained in a housing | 0 | 1.1.2006 to 31.12.2008 |
| ex85438997 | 85 | Voltage controlled oscillator (VCO), other than temperature compensated oscillators, consisting of active and passive elements mounted on a printed circuit, contained in a housing | 0 | 1.1.2006 to 31.12.2008 |
| ex85438997 | 90 | Fuel cell module consisting of:- polymer electrolyte membrane fuel cells in a housing with an integrated cooling system,
- a voltage monitoring unit and connections,
for use in the manufacture of car propulsion systems | 0 | 1.1.2006 to 31.12.2008 |
| ex85439095 | 20 | Stainless steel cathode in the form of a plate with a hanger bar, whether or not with plastic side strips | 0 | 1.1.2006 to 31.12.2008 |
| ex85439095 | 30 | Assembly of products falling within heading 8541 or 8542 mounted on a printed circuit, contained in a housing | 0 | 1.1.2006 to 31.12.2008 |
| ex85446010 | 10 | Anode cap cable, for use in the manufacture of fly back transformers | 0 | 1.1.2006 to 31.12.2008 |
| ex85451990 | 20 | Carbon electrodes, for use in the manufacture of zinc-carbon batteries | 0 | 1.1.2006 to 31.12.2008 |
| ex85459090 | 01 | Cell and battery carbon, in the form of rods, with a length of 34 mm or more but not exceeding 160 mm and a diameter not exceeding 12 mm | 0 | 1.1.2006 to 31.12.2008 |
| ex85471010 | 10 | Insulated fitting of ceramics, containing by weight 90 % or more of aluminium oxide, metallised, in the form of a hollow cylindrical body of an external diameter of 20 mm or more but not exceeding 250 mm, for the manufacture of vacuum interrupters | 0 | 1.1.2006 to 31.12.2008 |
| ex85489090 | 38 | Parts, for use in the manufacture or the repair of products falling within subheading 85172100 | 0 | 1.1.2006 to 31.12.2008 |
| ex85489090 | 40 | Infrared signal receiver unit, consisting of a photodiode and at least an amplifier in the form of a monolithic integrated circuit, contained in a housing | 0 | 1.1.2006 to 31.12.2008 |
| ex85489090 | 41 | Unit, consisting of a resonator operating within a frequency range of 1,8 MHz or more but not exceeding 40 MHz and a capacitor, contained in a housing | 0 | 1.1.2006 to 31.12.2008 |
| ex85489090ex91109000 | 4294 | Clock/calendar circuit, consisting of a printed circuit on which are mounted at least a quartz oscillator and a monolithic integrated circuit, the whole contained in a housing | 0 | 1.1.2006 to 31.12.2008 |
| ex85489090 | 43 | Contact image sensor | 0 | 1.1.2006 to 31.12.2008 |
| ex85489090 | 47 | Unit consisting of two or more light emitting diode chips operating at a typical wavelength of 450 nm or more but not exceeding 660 nm, contained in a leadframe housing having a circular opening whose exterior dimensions without fittings — do not exceed 4 x 4 mm | 0 | 1.1.2006 to 31.12.2008 |
| ex85489090 | 48 | Optical unit, consisting at least of a laserdiode and a photodiode operating at a typical wavelength of 635 nm or more but not exceeding 815 nm | 0 | 1.1.2006 to 31.12.2008 |
| ex85489090 | 49 | LCD modules, solely consisting of one or more TFT glass or plastic cells, combined with touch screen facilities, with or without backlight unit, with or without inverters and one or more printed circuit boards with control electronics for pixel addressing only | 0 | 1.1.2006 to 31.12.2008 |
| ex87111000 | 10 | Portable motorised scooter, presented unassembled or disassembled | 0 | 1.1.2006 to 31.12.2008 |
| ex90011090 | 10 | Image reverser made up from an assembly of optical fibres | 0 | 1.1.2006 to 31.12.2008 |
| ex90012000 | 10 | Material consisting of a polarising film, supported on one or both sides by transparent material | 0 | 1.1.2006 to 31.12.2008 |
| ex90019000 | 20 | Rear projection screen, comprising a Fresnel lens of plastic and a polarising sheet of plastic, for use in the manufacture of products falling within heading 8528 | 0 | 1.1.2006 to 31.12.2008 |
| ex90019000 | 25 | Lens of plastic, unmounted, having a focal length of 3,86 mm (±0,1 mm) and with a diameter not exceeding 8 mm, for use in the manufacture of compact disc players | 0 | 1.1.2006 to 31.12.2008 |
| ex90019000 | 30 | Optical fibre plate, for use in the manufacture of screens and photocathodes for image intensifiers | 0 | 1.1.2006 to 31.12.2008 |
| ex90019000 | 35 | Rear projection screen, comprising a lenticular plastic plate | 0 | 1.1.2006 to 31.12.2008 |
| ex90019000 | 40 | Prism for the splitting of light, unmounted, for use in the manufacture of charged-coupled image (CCD) cameras | 0 | 1.1.2006 to 31.12.2008 |
| ex90019000 | 45 | Rod of neodymium-doped yttrium-aluminium garnet (YAG) material, polished at both ends | 0 | 1.1.2006 to 31.12.2008 |
| ex90019000 | 50 | Lens of plastic, unmounted, for use in the manufacture of products falling within subheading 90064000 | 0 | 1.1.2006 to 31.12.2008 |
| ex90021100 | 10 | Adjustable lens unit, having a focal length of 90 mm or more but not exceeding 180 mm and comprising a combination of between 4 and 8 glass or methacrylic lenses with a diameter of 120 mm or more but not exceeding 180 mm, each lens coated on at least one side with a magnesium fluoride layer, for use in the manufacture of video projectors | 0 | 1.1.2006 to 31.12.2008 |
| ex90021100 | 50 | Lens unit, having a focal length of 25 mm or more but not exceeding 150 mm, consisting of glass or plastic lenses, with a diameter of 60 mm or more but not exceeding 190 mm | 0 | 1.1.2006 to 31.12.2008 |
| ex90021100 | 60 | Optical element, comprising one or more mounted lenses of plastic, for use in the manufacture of products falling within subheading 90064000 | 0 | 1.1.2006 to 31.12.2008 |
| ex90021900 | 10 | Lens unit, having a focal length of 24,96 mm (±0,1 mm), a diameter of 16 mm and a length of 16 mm, for use in the manufacture of products falling within subheading 85172100 | 0 | 1.1.2006 to 31.12.2008 |
| ex90022000 | 10 | Filter, consisting of a plastic polarising membrane, a glass plate and a transparent protective film, mounted on a metal frame, for use in the manufacture of products falling within heading 8528 | 0 | 1.1.2006 to 31.12.2008 |
| ex90029000 | 20 | Lens, mounted, having a fixed focal length of 3,8 mm (±0,19 mm) or 8 mm (±0,4 mm), with a relative aperture of F2.0 and a diameter not exceeding 33 mm, for use in the manufacture of charged-coupled (CCD) cameras | 0 | 1.1.2006 to 31.12.2008 |
| ex90029000 | 30 | Optical unit, comprising 1 or 2 rows of optical glass fibres in the form of lenses and with a diameter of 0,85 mm or more but not exceeding 1,15 mm, embedded between 2 plastic plates | 0 | 1.1.2006 to 31.12.2008 |
| ex90029000 | 40 | Lens and image gate assembly, for a real-time film scanning system, comprising a lens consisting of 9 or 11 elements and having an illumination function | 0 | 1.1.2006 to 31.12.2008 |
| ex90029000 | 50 | Lenses, mounted, for use in the manufacture of projection TV | 0 | 1.1.2006 to 31.12.2008 |
| ex90069190 | 10 | Parts, for use in the manufacture of products falling within subheading 90064000 | 0 | 1.1.2006 to 31.12.2008 |
| ex90138090 | 10 | Polarisation insensitive fibre-optic isolator, operating at a wavelength of 1200 nm or more, contained in a cylindrical housing | 0 | 1.1.2006 to 31.12.2008 |
| ex90138090 | 20 | Optical switch, comprising at least one optical input and two optical outputs and with electrical connectors | 0 | 1.1.2006 to 31.12.2008 |
| ex90179090 | 20 | Thermal printer head, comprising at least 7168 heater elements mounted on 2 or more ceramic supports, the whole contained in a housing the exterior dimensions of which exceed 21 × 39 × 639 mm | 0 | 1.1.2006 to 31.12.2008 |
| ex90223000 | 10 | X-ray tube with a target voltage of 4 kV or more but not exceeding 30 kV, a power not exceeding 9 W and a target current not exceeding 2 mA | 0 | 1.1.2006 to 31.12.2008 |
| ex90271090 | 10 | Sensor element for gas or smoke analysis in motor vehicles, essentially consisting of a zirconium-ceramic element in a metal housing | 0 | 1.1.2006 to 31.12.2008 |
| ex90318034ex90318038 | 3030 | Apparatus for measuring the angle and direction of rotation of motor vehicles, consisting of at least one yaw rate sensor in the form of a monocrystalline quartz, whether or not combined with one or more measuring sensors, the whole contained in a housing | 0 | 1.1.2006 to 31.12.2008 |
| ex90318038 | 10 | Acceleration measurement device for automotive applications, comprising one or more active and/or passive elements and one or more sensors, the whole contained in a housing | 0 | 1.1.2006 to 31.12.2008 |
| ex90318038 | 20 | Machines and apparatus for the automatic testing of the integrity of ink-jet cartridge housings | 0 | 1.1.2006 to 31.12.2008 |
| ex90319085 | 20 | Assembly for a laser align sensor, in the form of a printed circuit comprising optical filters and a charge-coupled image (CCD) sensor, the whole contained in a housing | 0 | 1.1.2006 to 31.12.2008 |
| ex90321081 | 20 | Thermostat, comprising a snap-action switch, for direct mounting on an electric motor coil, contained in a hermetically sealed housing | 0 | 1.1.2006 to 31.12.2008 |
| ex90328900 | 20 | Automotive airbag shock-sensor, comprising a contact capable of switching a current of 12 A at a voltage of 30 V, having a typical contact resistance of 80 mOhm | 0 | 1.1.2006 to 31.12.2008 |
| ex90328900 | 30 | Electronic controller of eletric power steering (EPS controller) | 0 | 1.1.2006 to 31.12.2008 |
| ex91069010 | 10 | Timer assembly, for use in the manufacture of goods of subheading 85165000 | 0 | 1.1.2006 to 31.12.2008 |
| ex91101200 | 91 | Assembly consisting of a printed circuit on which are mounted one quartz oscillator, at least one watch circuit and, whether or not integrated, at least one capacitor, of a thickness not exceeding 5 mm | 0 | 1.1.2006 to 31.12.2008 |
| ex91109000ex91149000 | 9291 | Assembly consisting of a printed circuit on which is mounted a watch circuit or a watch circuit and a quartz oscillator, of a thickness not exceeding 5 mm | 0 | 1.1.2006 to 31.12.2008' |
| ex91109000 | 93 | Assembly consisting of a printed circuit on which is mounted at least one watch circuit, a quartz oscillator and a piezo-electric sound element, with a thickness exceeding 5 mm | 0 | 1.1.2006 to 31.12.2008 |
| ex94054035 | 10 | Electric light assembly of synthetic material containing 3 fluorescent tubes (RBG) of a diameter of 3,0 mm (±0,2 mm), of a length of 420 mm (±1 mm) or more, but not exceeding 600 mm (±1 mm), for the manufacture of goods of heading 8528 | 0 | 1.1.2006 to 31.12.2008 |
| ex96089100 | 10 | Non-fibrous plastic pen-tips with an internal channel | 0 | 1.1.2006 to 31.12.2008 |
| ex96089100 | 20 | Felt tips and other porous-tips for markers, without internal canal | 0 | 1.1.2006 to 31.12.2008 |
| ex96121010 | 10 | Ribbons of plastic with segments of different colours, providing the penetration of dyes by heat into a support (so called dye-sublimation) | 0 | 1.1.2006 to 31.12.2008 |
| ex96139000 | 20 | Piezo-electric ignition mechanism, whether or not with complementary elements | 0 | 1.1.2006 to 31.12.2008 |