| CN code | TARIC | Description | Rate of autonomous duty (%) |
|---|
| ex03026999 | 10 | Sturgeons, fresh, chilled or frozen, for processing | 0 |
| ex03037998 | 10 |
| ex03026999 | 20 | Lump fish (Cyclopterus lumpus) with roe, fresh or chilled, for processing | 0 |
| ex03026999 | 30 | Red snapper (Lutjanus purpureus), fresh, chilled or frozen, for processing | 0 |
| ex03037998 | 20 |
| ex03027000 | 11 | Hard fish roes, fresh, chilled or frozen | 0 |
| ex03027000 | 31 |
| ex03027000 | 41 |
| ex03027000 | 91 |
| ex03038090 | 10 |
| ex03038090 | 19 |
| ex03031100 | 10 | Pacific salmon (Oncorhynchus spp.), frozen and headless, for the processing industry for manufacture into pastes or spreads | 0 |
| ex03031900 | 10 |
| ex03041038 | 45 | Fillets and meat of dogfish (Squalus acanthias), fresh, chilled or frozen | 6 |
| ex03041098 | 60 |
| ex03042061 | 10 |
| ex03049097 | 31 |
| ex03052000 | 11 | Hard fish roes, salted or in brine | 0 |
| ex03052000 | 18 |
| ex03052000 | 19 |
| ex03052000 | 21 |
| ex03052000 | 30 |
| ex03061990 | 10 | Krill for processing | 0 |
| ex03062990 | 10 |
| ex06039000 | 10 | Flowers, flower buds, foliage, leaves and other parts of plants, not further prepared than dried, dyed or bleached, for use in the manufacture of pot pourri of subheading 33074900 | 0 |
| ex06049990 | 10 |
| ex07102100 | 10 | Peas in pods, of the species Pisum sativum of the variety Hortense axiphium, frozen, of a thickness not exceeding 6 mm, to be used, in their pods, in the manufacture of prepared meals | 0 |
| ex07108095 | 50 | Bamboo shoots, frozen, not put up for retail sale | 0 |
| ex07115900 | 11 | Mushrooms, excluding mushrooms of the genus Agaricus, provisionally preserved in brine, in sulphur water, or in other preservative solutions, but unsuitable in that state for immediate consumption, for the food-canning industry | 0 |
| ex07115900 | 91 |
| ex07123200 | 11 | Mushrooms, excluding mushrooms of the genus Agaricus, dried, whole or in identifiable slices or pieces, for treatment other than simple repacking for retail sale | 0 |
| ex07123200 | 21 |
| ex07123300 | 11 |
| ex07123300 | 21 |
| ex07123900 | 11 |
| ex07123900 | 21 |
| ex08041000 | 11 | Dates, fresh or dried, not put up for retail sale | 0 |
| ex08041000 | 21 |
| ex08104050 | 10 | Fruit of the species Vaccinium macrocarpon, fresh | 0 |
| ex08109095 | 10 | Rose-hips, fresh | 0 |
| 08119050 | | Fruit of the genus Vaccinium, uncooked or cooked by steaming or boiling in water, frozen, not containing added sugar or other sweetening matter | 0 |
| 08119070 | |
| ex08119095 | 66 |
| ex08119095 | 67 |
| ex08119095 | 20 | Boysenberries, frozen, not containing added sugar, not put up for retail sale | 0 |
| ex08119095 | 30 | Pineapple (Ananas comosus), in pieces, frozen | 0 |
| ex08119095 | 40 | Rose-hips, uncooked or cooked by steaming or boiling in water, frozen, not containing added sugar or other sweetening matter | 0 |
| ex15119019 | 10 | Palm oil, coconut (copra) oil, palm kernel oil, for the manufacture of:- industrial monocarboxylic fatty acids of subheading 38231910,
- mixtures of methyl esters of fatty acids of subheading 38249099,
- methyl esters of fatty acids of heading 2915 or 2916,
- stearic acid of subheading 38231100or
- goods of heading No 3401
| 0 |
| ex15119091 | 10 |
| ex15131110 | 10 |
| ex15131930 | 10 |
| ex15132110 | 10 |
| ex15132930 | 10 |
| ex15159099 | 92 | Vegetable oil, refined, containing by weight 35 % or more but not more than 50 % of arachidonic acid or 35 % or more but not more than 50 % of docosahexaenoic acid | 0 |
| ex15180091 | 10 | Soya-bean oil, modified with maleic acid, for the manufacture of cosmetic products | 0 |
| ex16041100 | 20 | Pacific salmon (Oncorhynchus spp.), for the processing industry for manufacture into pastes or spreads | 0 |
| ex16042010 | 20 |
| ex16043090 | 10 | Hard fish roes, washed, cleaned of adherent organs and simply salted or in brine, for processing | 0 |
| ex16051000 | 11 | Crabs of the species "King" (Paralithodes camchaticus), "Hanasaki" (Paralithodes brevipes), "Kegani" (Erimacrus isenbecki), "Queen" and "Snow" (Chionoecetes spp.), "Red" (Geryon quinquedens), "Rough stone" (Neolithodes asperrimus), Lithodes antarctica, "Mud" (Scylla serrata), "Blue" (Portunus spp.), simply boiled in water and shelled, whether or not frozen, in immediate packings of a net content of 2 kg or more | 0 |
| ex16051000 | 19 |
| ex16051000 | 92 | Crabs of the species Paralomis granulosa | 0 |
| ex16051000 | 94 |
| ex19023010 | 10 | Transparent noodles, cut in pieces, obtained from beans (Vigna radiata (L.) Wilczek), not put up for retail sale | 00 EUR/100 kg/net |
| ex19030000 | 20 |
| ex20059080 | 70 | Bamboo shoots, prepared or preserved, not put up for retail sale | 0 |
| ex21061020 | 10 | Soya protein isolate, containing by weight 6,6 % or more but not more than 8,6 % of calcium phosphate | 0 |
| ex35040000 | 30 |
| ex27079911 | 10 | Crude light oils containing by weight:- 10 % or more of vinyltoluenes,
- 10 % or more of indeneand
- 1 % or more but not more than 5 % of naphthalene
| 0 |
| ex28053010 | 10 | Alloy of cerium and other rare-earth metals, containing by weight 47 % or more of cerium | 0 |
| ex28053010 | 20 | Alloy of lanthanum and other rare-earth metals, containing by weight 43 % or more of lanthanum | 0 |
| ex28053090 | 10 | Lanthanum of a purity by weight of 99 % or more | 0 |
| ex28111980 | 10 | Sulfamidic acid | 0 |
| ex28112200 | 10 | Silicon dioxide in the form of powder, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges | 0 |
| ex28112990 | 10 | Tellurium dioxide | 0 |
| ex28129000 | 10 | Nitrogen trifluoride | 0 |
| ex2812900020 | 20 | Silicon tetrafluoride | 0 |
| ex28183000 | 10 | Aluminium hydroxide oxide in the form of pseudo-boehmite | 4 |
| ex28199090 | 10 | Dichromium trioxide:- of a specific surface of 37 m2/g or more (as determined by the BET method),
- of a purity by weight of 99,5 % or more calculated on the dry substance,
- of a specific gravity of 1,2 g/cm3 or less,
for the manufacture of magnetic chromium dioxide | 0 |
| ex28209090 | 10 | Manganese (II,III) oxide containing by weight 70 % or more of manganese | 0 |
| ex28211000 | 10 | Diiron trioxide, in the form of powder, of a purity by weight of 99,2 % or more, for the manufacture of goods of heading No 8504 | 0 |
| ex28230000 | 10 | Titanium dioxide, of a purity by weight of 99,9 % or more, with an average grain-size of 1,2 µm or more but not exceeding 1,8 µm, for the manufacture of goods of heading No 8532 or 8533 | 0 |
| ex28255000 | 10 | Copper (I or II) oxide containing by weight 78 % or more of copper and not more than 0,03 % of chloride | 0 |
| ex28269090 | 10 | Potassium hexafluorophosphate | 0 |
| ex28273980 | 10 | Copper monochloride of a purity by weight of 96 % or more but not exceeding 99 % | 0 |
| ex28276000 | 10 | Titanium tetraiodide | 0 |
| ex28301000 | 10 | Disodium tetrasulfide, containing by weight 38 % or less of sodium calculated on the dry weight | 0 |
| ex28302000 | 10 | Zinc sulfide containing:- 20,0 mg/kg or less of chloride,
- 0,2 mg/kg or less of copper,
- 0,5 mg/kg or less of ironand
- 1,0 mg/kg or less of lead
| 0 |
| ex28369100 | 20 | Lithium carbonate, containing one or more of the following impurities at the concentrations indicated:- 2 mg/kg or more of arsenic,
- 200 mg/kg or more of calcium,
- 200 mg/kg or more of chlorides,
- 20 mg/kg or more of iron,
- 150 mg/kg or more of magnesium,
- 20 mg/kg or more of heavy metals,
- 300 mg/kg or more of potassium,
- 300 mg/kg or more of sodium,
- 200 mg/kg or more of sulfates,
determined according to the methods specified in the European Pharmacopœia | 0 |
| ex28369918 | 10 | Zirconium (IV) basic carbonate | 0 |
| ex28371900 | 10 | Zinc cyanide | 0 |
| ex28371900 | 20 | Copper cyanide | 0 |
| ex28399000 | 10 | Lead silicate hydrate, of a lead content by weight of (84,5 ± 1,5) %, evaluated as lead monoxide, in the form of powder | 0 |
| ex28399000 | 20 | Calcium silicate | 0 |
| ex28429090 | 10 | Ammonium sulfamidate | 0 |
| ex28439090 | 20 | Palladium monoxide | 0 |
| ex28439090 | 30 | Mixture of palladium phthalocyanines | 0 |
| 28451000 | | Heavy water (deuterium oxide) (Euratom) | 0 |
| 28459010 | | Deuterium and compounds thereof; hydrogen and compounds thereof, enriched in deuterium; mixtures and solutions containing these products (Euratom) | 0 |
| ex28461000 | 10 | Rare-earth concentrate containing by weight 60 % or more but not more than 95 % of rare-earth oxides and not more than 1 % each of zirconium oxide, aluminium oxide or iron oxide, and having a loss on ignition of 5 % or more by weight | 0 |
| ex38249099 | 48 |
| ex28461000 | 20 | Dicerium tricarbonate, whether or not hydrated | 0 |
| ex28461000 | 30 | Cerium lanthanum carbonate, whether or not hydrated | 0 |
| ex28461000 | 40 | Cerium lanthanum neodymium praseodymium carbonate, whether or not hydrated | 0 |
| 28469000 | | Compounds, inorganic or organic, of rare-earth metals, of yttrium or of scandium or of mixtures of these metals, other than those of subheading 28461000 | 0 |
| ex28480000 | 10 | Phosphine | 0 |
| ex28500020 | 10 | Silane | 0 |
| ex28500020 | 20 | Arsine | 0 |
| ex29033080 | 10 | Carbon tetrafluoride (tetrafluoromethane) | 0 |
| ex29033080 | 20 | 1,1,1,2,3,3,3-Heptafluoropropane | 0 |
| ex29033080 | 30 | Perfluoroethane | 0 |
| ex29033080 | 40 | 1,1-Difluoroethane | 0 |
| ex2903308050 | 50 | 1,1,1,3,3-Pentafluoropropane, for use as non-flammable liquid blowing agent in the formation of insulating foams | 0 |
| ex2903308060 | 60 | Octafluoropropane | 0 |
| ex29035990 | 10 | 1,6,7,8,9,14,15,16,17,17,18,18-Dodecachloropentacyclo[12.2.1.16,9.02,13.05,10]octadeca-7,15-diene, for use in the manufacture of polyamide, polyethylene, synthetic rubber or polystyrene | 0 |
| ex29035990 | 20 | Hexachlorocyclopentadiene | 0 |
| ex29036990 | 10 | Di- or tetrachlorotricyclo[8.2.2.24,7]hexadeca-1(12),4,6,10,13,15-hexaene, mixed isomers | 0 |
| ex29036990 | 20 | 1,2-Bis(pentabromophenyl)ethane | 0 |
| ex29036990 | 40 | 2,6-Dichlorotoluene, of a purity by weight of 99 % or more and containing:- 0,001 mg/kg or less of tetrachlorodibenzodioxines,
- 0,001 mg/kg or less of tetrachlorodibenzofurans,
- 0,2 mg/kg or less of tetrachlorobiphenyls
| 0 |
| ex29036990 | 50 | 1-(Chloromethyl)naphthalene | 0 |
| ex29036990 | 60 | α-Chloro(ethyl)toluenes | 0 |
| ex29041000 | 30 | Sodium p-styrenesulfonate | 0 |
| ex29042000 | 10 | Nitromethane | 0 |
| ex29042000 | 20 | Nitroethane | 0 |
| ex29042000 | 30 | 1-Nitropropane | 0 |
| ex29042000 | 40 | 2-Nitropropane | 0 |
| ex29049020 | 10 | Tosyl chloride | 0 |
| ex29049040 | 10 | Trichloronitromethane, for the manufacture of goods of subheading 380820 | 0 |
| ex29049085 | 10 | Quintozene (ISO) | 0 |
| ex29049085 | 20 | 1-Chloro-2,4-dinitrobenzene | 0 |
| ex29051900 | 11 | Potassium tert-butanolate (potassium tert-butoxide), whether or not in the form of a solution in tetrahydrofuran | 0 |
| ex38249099 | 56 |
| ex2905190030 | 30 | 2,6-Dimethylheptan-4-ol | 0 |
| ex29053980 | 20 | Hexa-1,5-diene-3,4-diol | 0 |
| ex29054910 | 10 | Ethylidynetrimethanol | 0 |
| 29061100 | | Menthol | 0 |
| ex29061900 | 10 | Cyclohex-1,4-ylenedimethanol | 0 |
| ex29061900 | 20 | 4,4′-Isopropylidenedicyclohexanol | 0 |
| ex29062900 | 10 | 2,2′-(m-Phenylene)dipropan-2-ol | 0 |
| ex29071900 | 10 | 2,3,5-Trimethylphenol | 0 |
| ex29072100 | 10 | Resorcinol | 0 |
| ex29072900 | 10 | Disodium 1,4-dihydroanthracene-9,10-diolate, in the form of an aqueous solution | 0 |
| ex29072900 | 20 | 4,4′-(3,3,5-Trimethylcyclohexylidene)diphenol | 0 |
| ex29072900 | 30 | 4,4′,4″-Ethylidynetriphenol | 0 |
| ex29072900 | 40 | Mixture of isomers of methylenediphenol | 0 |
| ex29072900 | 50 | 6,6′,6″-Tricyclohexyl-4,4′,4″-butane-1,1,3-triyltri(m-cresol) | 0 |
| ex29072900 | 60 | 4,4′-(1,3-Phenylenediisopropylidene)diphenol | 0 |
| ex29072900 | 70 | 2,2′,2″,6,6′,6″-Hexa-tert-butyl-α,α′,α″-(mesitylene-2,4,6-triyl)tri-p-cresol | 0 |
| ex29072900 | 80 | Pyrogallol | 0 |
| ex29082000 | 10 | Disodium 3-hydroxynaphthalene-2,7-disulfonate | 0 |
| ex29082000 | 20 | Dipotassium 7-hydroxynaphthalene-1,3-disulfonate | 0 |
| ex29082000 | 30 | 6-Hydroxynaphthalene-2-sulfonic acid and its salts | 0 |
| ex38249099 | 74 |
| ex29089000 | 10 | 4-Nitroso-o-cresol | 0 |
| ex29089000 | 30 | 4-Nitrophenol | 0 |
| ex29091900 | 10 | 1,2-Bis(2-chloroethoxy)ethane | 0 |
| ex29091900 | 20 | Bis(2-chloroethyl) ether | 0 |
| ex2909190030 | 30 | Mixture of isomers of nonafluorobutyl methyl ether or nonafluorobutyl ethyl ether, of a purity by weight of 99 % or more | 0 |
| ex29093038 | 10 | Bis(pentabromophenyl) ether | 0 |
| ex29093090 | 10 | 4-(p-Tolyloxy)biphenyl | 0 |
| ex29093090 | 20 | 1,2-Bis(m-tolyloxy)ethane | 0 |
| ex29093090 | 30 | 1,2-Diphenoxyethane | 0 |
| ex29094400 | 10 | 2-Hexyloxyethanol | 0 |
| ex29094919 | 10 | 1-tert-Butoxypropan-2-ol | 0 |
| ex29095090 | 10 | 4-(2-Methoxyethyl)phenol | 0 |
| ex29109000 | 30 | 2,3-Epoxypropan-1-ol (glycidol) | 0 |
| ex29109000 | 40 | Perfluoroepoxypropane | 0 |
| ex29109000 | 60 | 1,2-Epoxyoctadecane, of a purity by weight of 82 % or more | 0 |
| ex38249099 | 59 |
| ex29109000 | 70 | (Epoxyethyl)benzene (styrene oxide) | 0 |
| ex29122900 | 10 | Terephthalaldehyde | 0 |
| ex2912420010 | 10 | Ethylvanillin (3-ethoxy-4-hydroxybenzaldehyde) | 0 |
| ex29124900 | 10 | 3-Phenoxybenzaldehyde | 0 |
| ex29141990 | 10 | 3,3-Dimethylbutan-2-one | 0 |
| 29142100 | | Camphor | 0 |
| ex29142900 | 10 | Estr-4-ene-3,17-dione | 0 |
| ex29142900 | 20 | Cyclohexadec-8-enone | 0 |
| ex29143900 | 10 | Benz[de]anthracen-7-one | 0 |
| ex29145000 | 30 | 2′-Hydroxyacetophenone | 0 |
| ex29145000 | 40 | 4′-Hydroxyacetophenone | 0 |
| ex29145000 | 50 | 6′-Methoxy-2′-acetonaphthone | 0 |
| ex29146990 | 10 | 2-Ethylanthraquinone | 0 |
| ex29146990 | 20 | 2-Pentylanthraquinone | 0 |
| ex29146990 | 30 | 1,4-Dihydroxyanthraquinone | 0 |
| ex29146990 | 40 | 2,3-Dihydro-1,4-dihydroxyanthraquinone | 0 |
| ex29146990 | 50 | 2-Methylanthraquinone | 0 |
| ex29147000 | 10 | 1-Chloro-3,3-dimethylbutan-2-one | 0 |
| ex29147000 | 30 | 4,4′-Dibromobenzil | 0 |
| ex2914700040 | 40 | Perfluoro(2-methylpentan-3-one) | 0 |
| ex29152900 | 10 | Antimony triacetate | 0 |
| ex29153990 | 20 | 5α-Bromo-6β-hydroxy-17-oxo-androstan-3β-yl acetate | 0 |
| ex29153990 | 30 | But-3-ene-1,2-diyl di(acetate) | 0 |
| ex29153990 | 40 | tert-Butyl acetate | 0 |
| ex2915399050 | 50 | 3-Acetylphenyl acetate | 0 |
| ex29154000 | 10 | Vinyl chloroacetate | 0 |
| ex29159080 | 20 | Trimethyl orthoacetate | 0 |
| ex29159080 | 30 | 2-Ethylbutyric acid | 0 |
| ex29159080 | 40 | Nonanoic acid (pelargonic acid) | 0 |
| ex29161290 | 10 | 2-tert-Butyl-6-(3-tert-butyl-2-hydroxy-5-methylbenzyl)-4-methylphenyl acrylate | 0 |
| ex29161290 | 20 | 2-Ethoxyethyl acrylate | 0 |
| ex29161290 | 30 | Isobutyl acrylate | 0 |
| ex29161300 | 10 | Hydroxyzinc methacrylate, in the form of powder | 0 |
| ex29161300 | 20 | Zinc dimethacrylate, in the form of powder | 0 |
| ex29161490 | 10 | 2,3-Epoxypropyl methacrylate | 0 |
| ex29161980 | 20 | Methyl 3,3-dimethylpent-4-enoate | 0 |
| ex29162000 | 10 | Methyl 3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylate | 0 |
| ex29162000 | 30 | Empenthrin (ISO) | 0 |
| ex29162000 | 40 | Cyclohexanecarboxylic acid | 0 |
| ex29162000 | 50 | Ethyl 2,2-dimethyl-3-(2-methylpropenyl)cyclopropanecarboxylate | 0 |
| ex29163900 | 10 | Methyl 3-chlorobenzoate | 0 |
| ex29163900 | 20 | 3,5-Dichlorobenzoyl chloride | 3.6 |
| ex29163900 | 25 | p-Toluic acid | 0 |
| ex29163900 | 35 | o-Chlorophenylacetic acid | 0 |
| ex29163900 | 40 | Vinyl 4-tert-butylbenzoate | 0 |
| ex29163900 | 50 | 3,5-Dimethylbenzoyl chloride | 0 |
| ex29163900 | 60 | 4-Ethylbenzoyl chloride | 0 |
| ex29163900 | 70 | Ibuprofen (INN) | 0 |
| ex29163900 | 80 | Ethyl 2-(4-nitrophenyl)butyrate | 0 |
| ex29171100 | 20 | Bis(p-methylbenzyl) oxalate | 0 |
| ex29171990 | 20 | Sodium 1,2-bis(cyclohexyloxycarbonyl)ethanesulfonate | 0 |
| ex29171990 | 40 | Dodecanedioic acid, of a purity by weight of more than 98,5 % | 0 |
| ex29171990 | 50 | Glutaric anhydride | 0 |
| ex29171990 | 60 | Diethyl isobutylmalonate | 0 |
| ex29171990 | 70 | Itaconic acid | 0 |
| ex29172000 | 30 | 1,4,5,6,7,7-Hexachloro-8,9,10-trinorborn-5-ene-2,3-dicarboxylic anhydride | 0 |
| ex29172000 | 40 | 3-Methyl-1,2,3,6-tetrahydrophthalic anhydride | 0 |
| ex29173400 | 10 | Diallyl phthalate | 0 |
| ex29173980 | 10 | Dimethyl naphthalene-2,6-dicarboxylate | 0 |
| ex29173980 | 20 | Benzene-1,2,4,5-tetracarboxylic acid (pyromellitic acid) | 0 |
| ex29173980 | 30 | Benzene-1,2:4,5-tetracarboxylic dianhydride (pyromellitic dianhydride) | 0 |
| ex29173980 | 40 | Biphenyl-3,4:3′,4′-tetracarboxylic dianhydride | 0 |
| ex29181300 | 10 | L-(-)-Di-p-toluoyltartaric acid | 0 |
| ex29181980 | 20 | L-Malic acid | 0 |
| ex29181980 | 30 | 2,2-Bis(hydroxymethyl)butyric acid | 0 |
| ex29182910 | 10 | Monohydroxynaphthoic acids | 0 |
| ex29182980 | 10 | Hexamethylene bis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate] | 0 |
| ex29182980 | 20 | Gallic acid, of a purity by weight of 98,5 % or more calculated on the dry weight (measured by acidimetry) | 0 |
| ex29183000 | 20 | 2-(4-Ethylbenzoyl)benzoic acid | 0 |
| ex29189090 | 10 | 3,4-Epoxycyclohexylmethyl 3,4-epoxycyclohexanecarboxylate | 0 |
| ex29189090 | 20 | Methyl 3-methoxyacrylate | 0 |
| ex29189090 | 30 | Methyl 2-(4-hydroxyphenoxy)propionate | 0 |
| ex29189090 | 40 | trans-4-Hydroxy-3-methoxycinnamic acid | 0 |
| ex29189090 | 50 | Methyl 3,4,5-trimethoxybenzoate | 0 |
| ex29189090 | 60 | 3,4,5-Trimethoxybenzoic acid | 0 |
| ex29190090 | 10 | 2,2′-Methylenebis(4,6-di-tert-butylphenyl) phosphate, monosodium salt | 0 |
| ex29190090 | 20 | Diammonium salt of tetramyristoylcardiolipin | 0 |
| ex29201000 | 10 | Fenitrothion (ISO) | 0 |
| ex29201000 | 20 | Tolclofos-methyl (ISO) | 0 |
| ex29209010 | 10 | Diethyl sulfate | 0 |
| ex29209010 | 20 | Diallyl 2,2′-oxydiethyl dicarbonate | 0 |
| ex2920901030 | 30 | 4-Ethyl-1,3-dioxolan-2-one | 0 |
| 29209030 | | Trimethyl phosphite | 0 |
| ex29209085 | 10 | O,O′-Dioctadecyl pentaerythritol bis(phosphite) | 0 |
| ex29209085 | 30 | O,O′-Bis(2,4-di-tert-butylphenyl)pentaerythritol bis(phosphite) | 0 |
| ex29209085 | 40 | Tritolyl phosphite | 0 |
| ex29211980 | 10 | Triallylamine | 0 |
| ex29211980 | 20 | Ethyl(2-methylallyl)amine | 0 |
| ex29211980 | 30 | Allylamine | 0 |
| ex29212900 | 10 | N,N,N′,N′-Tetrabutylhexamethylenediamine | 0 |
| ex29212900 | 20 | Tris[3-(dimethylamino)propyl]amine | 0 |
| ex29212900 | 30 | Bis[3-(dimethylamino)propyl]methylamine | 0 |
| ex2921290040 | 40 | N,N'-Di-tert-butylethylenediamine | 0 |
| ex29213099 | 10 | Dicyclohexyl(methyl)amine | 0 |
| ex29213099 | 20 | Cyclohex-1,3-ylenebis(methylamine), for the manufacture of dishwashing products | 0 |
| ex29214210 | 10 | 2,6-Dichloro-4-nitroaniline | 0 |
| ex29214210 | 20 | 2-Bromo-4,6-dinitroaniline | 0 |
| ex29214210 | 30 | 4-Aminobenzene-1,3-disulfonic acid and its salts | 0 |
| ex29214210 | 40 | 2-Bromo-6-chloro-4-nitroaniline | 0 |
| ex29214210 | 50 | 3-Aminobenzenesulfonic acid | 0 |
| ex29214210 | 70 | 2-Aminobenzene-1,4-disulfonic acid | 0 |
| ex29214210 | 80 | 4-Chloro-2-nitroaniline | 0 |
| ex29214300 | 10 | 5-Amino-2-chlorotoluene-4-sulfonic acid | 0 |
| ex29214300 | 20 | 4-Amino-6-chlorotoluene-3-sulfonic acid | 0 |
| ex29214300 | 30 | 3-Nitro-p-toluidine | 0 |
| ex29214400 | 10 | Methyldiphenylamine | 0 |
| ex29214400 | 20 | Diphenylamine | 0 |
| ex29214500 | 10 | Sodium hydrogen 3-aminonaphthalene-1,5-disulfonate | 0 |
| ex29214500 | 20 | 2-Aminonaphthalene-1,5-disulfonic acid and its sodium salts | 0 |
| ex29214500 | 30 | 2-Aminonaphthalene-1-sulfonic acid | 0 |
| ex29214500 | 40 | 1-Naphthylamine | 0 |
| ex29214910 | 20 | Pendimethalin (ISO) | 3.5 |
| ex29214980 | 10 | 8-Anilinonaphthalene-1-sulfonic acid | 0 |
| ex29214980 | 20 | N-1-Naphthylaniline | 0 |
| ex29215990 | 10 | Mixture of isomers of 3,5-diethyltoluenediamine | 0 |
| ex29215990 | 20 | 4-(4-Aminoanilino)-3-nitrobenzenesulfonic acid | 0 |
| ex38249099 | 68 |
| ex29221980 | 10 | 4,4-Dimethoxybutylamine | 0 |
| ex29221980 | 30 | N,N,N′,N′-Tetramethyl-2,2′-oxybis(ethylamine) | 0 |
| ex29221980 | 40 | 2-Amino-2-methylpropanol, for use in the manufacture of goods of subheadings 300490 and 330530 | 0 |
| ex2922198050 | 50 | 2-(2-Methoxyphenoxy)ethylamine | 0 |
| ex29222100 | 10 | 2-Amino-5-hydroxynaphthalene-1,7-disulfonic acid and its salts, of a purity by weight of 60 % or more | 0 |
| ex29222100 | 20 | 4-Hydroxy-7-methylaminonaphthalene-2-sulfonic acid | 0 |
| ex29222100 | 30 | 6-Amino-4-hydroxynaphthalene-2-sulfonic acid | 0 |
| ex29222100 | 40 | 7-Amino-4-hydroxynaphthalene-2-sulfonic acid | 0 |
| ex29222200 | 10 | Anisidines | 0 |
| ex29222900 | 10 | 2-Methyl-N-phenyl-p-anisidine | 0 |
| ex29222900 | 20 | 3-Aminophenol | 0 |
| ex29222900 | 30 | 4-Amino-5-methoxy-2-methylbenzenesulfonic acid | 0 |
| ex29222900 | 40 | 2-Amino-4-tert-pentyl-6-nitrophenol | 0 |
| ex29222900 | 50 | 6-Methoxy-m-toluidine | 0 |
| ex29222900 | 60 | 3,5-Dichloro-4-(1,1,2,2-tetrafluoroethoxy)aniline | 0 |
| ex29222900 | 70 | 4-Nitro-o-anisidine | 0 |
| ex29222900 | 80 | 3-Diethylaminophenol | 0 |
| ex29223900 | 10 | 1-Amino-4-bromo-9,10-dioxoanthracene-2-sulfonic acid and its salts | 0 |
| ex29223900 | 20 | 1-Aminoanthraquinone | 0 |
| ex29223900 | 30 | 1-Bromo-4-methylaminoanthraquinone | 0 |
| ex29223900 | 40 | 1,4-Diamino-2,3-dichloroanthraquinone | 0 |
| ex29223900 | 50 | 2-Aminoanthraquinone | 0 |
| ex29223900 | 60 | 1,4-Diamino-2,3-dihydroanthraquinone | 0 |
| ex29224300 | 10 | Anthranilic acid | 0 |
| ex29224995 | 10 | Ornithine aspartate (INNM) | 0 |
| ex29224995 | 20 | 12-Aminododecanoic acid | 0 |
| ex29224995 | 30 | DL-Aspartic acid | 0 |
| ex29224995 | 40 | Norvaline | 0 |
| ex29225000 | 30 | 2-(3-Amino-4-chlorobenzoyl)benzoic acid | 0 |
| ex29225000 | 50 | 2-(4-Dibutylaminosalicyloyl)benzoic acid | 0 |
| ex29225000 | 70 | 2-(1-Hydroxycyclohexyl)-2-(4-methoxyphenyl)ethylammonium acetate | 0 |
| ex29239000 | 10 | Tetramethylammonium hydroxide, in the form of an aqueous solution containing:- (25 ± 0,5) % by weight of tetramethylammonium hydroxide,
- 500 mg/kg or less of carbonate,
- 200 mg/kg or less of chlorideand
- 5 mg/kg or less of potassium
| 0 |
| ex29239000 | 30 | Tetramethylammonium hydroxide pentahydrate, of a purity by weight of 98 % or more | 0 |
| ex29239000 | 40 | Benzyldimethyl(octadecyl)ammonium salts, for use in the manufacture of toner for photocopiers | 0 |
| ex29239000 | 50 | Tetraethylammonium hydroxide, in the form of an aqueous solution containing:- (35 ± 0,5) % by weight of tetraethylammonium hydroxide,
- 2000 mg/kg or less of chloride,
- 2 mg/kg or less of ironand
- 10 mg/kg or less of potasium
| 0 |
| ex29239000 | 60 | Tetrabutylammonium hydroxide, in the form of an aqueous solution containing by weight:- (55 ± 1,0) % of tetrabutylammonium hydroxide,
- 0,5 % or less of bromide,
- 0,4 % or less of tributylamine,
- 0,3 % or less of carbonateand
- 0,2 % or less of potassium and sodium taken together
| 0 |
| ex29239000 | 70 | Tetrapropylammonium hydroxide, in the form of an aqueous solution containing:- (40 ± 2) % by weight of tetrapropylammonium hydroxide,
- 0,3 % by weight or less of carbonate,
- 0,1 % by weight or less of tripropylamine,
- 500 mg/kg or less of bromideand
- 25 mg/kg or less of potassium and sodium taken together
| 0 |
| ex2923900080 | 80 | Diallyldimethylammonium chloride, in the form of an aqueous solution containing by weight 63 % or more but not more than 67 % of diallyldimethylammonium chloride | 0 |
| ex29241900 | 10 | 2-Acrylamido-2-methylpropanesulfonic acid and its sodium or ammonium salts | 0 |
| ex29241900 | 20 | N,N′-Methylenediacrylamide | 0 |
| ex29241900 | 30 | Methyl 2-acetamido-3-chloropropionate | 0 |
| ex29241900 | 40 | N-(1,1-Dimethyl-3-oxobutyl)acrylamide | 0 |
| ex29242190 | 10 | 4,4′-Dihydroxy-7,7′-ureylenedi(naphthalene-2-sulfonic acid) and its sodium salts | 0 |
| ex38249099 | 62 |
| ex29242995 | 10 | Alachlor (ISO) | 0 |
| ex29242995 | 15 | Acetochlor (ISO) | 0 |
| ex29242995 | 20 | 3′-Amino-4′-methoxyacetanilide | 0 |
| ex29242995 | 25 | 3′-Diethylaminoacetanilide | 0 |
| ex29242995 | 30 | Propachlor (ISO) | 0 |
| ex29242995 | 35 | Diethofencarb (ISO) | 0 |
| ex29242995 | 40 | 7-Acetamido-4-hydroxynaphthalene-2-sulfonic acid and its sodium salts | 0 |
| ex29242995 | 45 | 3′-Diethylamino-4′-methoxyacetanilide | 0 |
| ex29242995 | 50 | 5-[N-(2-Acetoxyethyl)acetoxyacetamido]-N,N′-bis(2,3-diacetoxypropyl)-2,4,6-triiodoisophthalamide | 0 |
| ex29242995 | 55 | 4′-Amino-N-methylacetanilide | 0 |
| ex29242995 | 60 | Beflubutamid (ISO) | 0 |
| ex29242995 | 65 | 2-(4-Hydroxyphenyl)acetamide | 0 |
| ex29242995 | 70 | 4-Acetamido-2-aminobenzenesulfonic acid | 0 |
| ex29242995 | 85 | p-Aminobenzamide | 0 |
| ex29251100 | 20 | Saccharin and its sodium salt | 0 |
| ex29251995 | 10 | N-Phenylmaleimide | 0 |
| ex2925199520 | 20 | N-(9-Fluorenylmethoxycarbonyloxy)succinimide | 0 |
| ex29252000 | 10 | Dicyclohexylcarbodiimide | 0 |
| ex29269095 | 10 | Methacrylonitrile | 0 |
| ex29269095 | 20 | 2-(m-Benzoylphenyl)propiononitrile | 0 |
| ex29269095 | 30 | 2-Amino-5-nitrobenzonitrile | 0 |
| ex29269095 | 45 | 2-Cyanoacetamide | 0 |
| ex29269095 | 50 | Alkyl or alkoxyalkyl esters of cyanoacetic acid | 0 |
| ex29269095 | 60 | Cyanoacetic acid in crystalline form | 0 |
| ex29269095 | 65 | Malononitrile | 0 |
| ex29269095 | 70 | Tetrachloroterephthalonitrile | 0 |
| ex29269095 | 75 | Ethyl 2-cyano-2-ethyl-3-methylhexanoate | 0 |
| ex29269095 | 80 | Ethyl 2-cyano-2-phenylbutyrate | 0 |
| ex29269095 | 85 | Ethyl 2-allyl-2-cyano-3-methylhexanoate | 0 |
| ex29269095 | 86 | Ethylenediaminetetraacetonitrile | 0 |
| ex29269095 | 87 | Nitrilotriacetonitrile | 0 |
| ex29269095 | 88 | 1,3-Propylenediaminetetraacetonitrile | 0 |
| ex29269095 | 89 | Butyronitrile | 0 |
| ex29270000 | 10 | 2,2′-Dimethyl-2,2′-azodipropionamidine dihydrochloride | 0 |
| ex29270000 | 20 | 4-Anilino-2-methoxybenzenediazonium hydrogen sulfate | 0 |
| ex29270000 | 30 | 4′-Aminoazobenzene-4-sulfonic acid | 0 |
| ex38249099 | 69 |
| ex29270000 | 40 | 2-Hydroxynaphthalene-1-diazonium-4-sulfonate | 0 |
| ex29270000 | 50 | 2-Hydroxy-6-nitronaphthalene-1-diazonium-4-sulfonate, of a purity by weight of 60 % or more | 0 |
| ex38249099 | 41 |
| ex29280090 | 10 | 3,3′Bis(3,5-di-tert-butyl-4-hydroxyphenyl)-N,N′-bipropionamide | 0 |
| ex29280090 | 20 | 2,4,6-Trichlorophenylhydrazine | 0 |
| ex29280090 | 40 | O-Ethylhydroxylamine, in the form of an aqueous solution | 0 |
| ex29280090 | 50 | N-Isopropylhydroxylamine, in the form of an aqueous solution | 0 |
| ex29280090 | 60 | Adipohydrazide | 0 |
| ex2928009080 | 80 | Cyflufenamid (ISO) | 0 |
| ex29291090 | 10 | Methylenedicyclohexyl diisocyanates | 0 |
| ex29291090 | 30 | 3,3′Dimethylbiphenyl-4,4′-diyl diisocyanate | 0 |
| ex29291090 | 40 | m-Isopropenyl-α,α-dimethylbenzyl isocyanate | 0 |
| ex29291090 | 50 | m-Phenylenediisopropylidene diisocyanate | 0 |
| ex29291090 | 60 | Trimethylhexamethylene diisocyanate, mixed isomers | 0 |
| ex29291090 | 70 | 9,9′-(3-Heptyl-4-pentylcyclohex-1,2-ylene)dinonyl diisocyanate | 0 |
| ex29309070 | 10 | Thiophenol | 0 |
| ex29309070 | 15 | Ethoprophos (ISO) | 0 |
| ex29309070 | 20 | 3,3-Dimethyl-1-methylthiobutanone oxime | 0 |
| ex29309070 | 25 | Thiophanate-methyl (ISO) | 0 |
| ex29309070 | 30 | 4-(4-Isopropoxyphenylsulfonyl)phenol | 0 |
| ex29309070 | 40 | 3,3′Thiodi(propionic acid) | 0 |
| ex29309070 | 45 | 2-[(p-Aminophenyl)sulfonyl]ethyl hydrogen sulfate | 0 |
| ex29309070 | 50 | 2-Chlorophenylsulfonyl isocyanate, in the form of a solution in xylene | 0 |
| ex38249099 | 51 |
| ex29309070 | 55 | Methyl 2-(isocyanatosulfonyl)methylbenzoate, in the form of a solution in xylene | 0 |
| ex38249099 | 52 |
| ex29309070 | 60 | Methyl phenyl sulfide | 0 |
| ex29309070 | 65 | Diiodomethyl p-tolyl sulfone | 0 |
| ex29309070 | 70 | 2-Aminophenyl phenyl sulfone, of a purity by weight of 75 % or more | 0 |
| ex38249099 | 71 |
| ex29309070 | 75 | 4,4′-[Methylenebis(oxyethylenethio)]diphenol | 0 |
| ex29309070 | 80 | Captan (ISO) | 0 |
| ex29309070 | 85 | Mesotrione (ISO) | 0 |
| ex29309070 | 86 | 4-Hydroxybenzenethiol | 0 |
| ex29309070 | 87 | 3-Sulfinobenzoic acid | 0 |
| ex2930907088 | 88 | Methylene dithiocyanate | 0 |
| 29310010 | | Dimethyl methylphosphonate | 0 |
| ex29310095 | 05 | Butylethylmagnesium, in the form of a solution in heptane | 0 |
| ex29310095 | 10 | 2-Diphenylphosphinobenzoic acid | 0 |
| ex29310095 | 20 | Bis(2-chloroethyl) 2-chloroethylphosphonate | 0 |
| ex29310095 | 25 | Sodium phenylphosphinate | 0 |
| ex29310095 | 30 | Bis(2-chloroethyl) vinylphosphonate | 0 |
| ex29310095 | 35 | Sodium tetraphenylborate | 0 |
| ex29310095 | 40 | N-(Phosphonomethyl)iminodiacetic acid | 0 |
| ex29310095 | 45 | Tributylphosphine | 0 |
| ex29310095 | 50 | Bis(2,4,4-trimethylpentyl)phosphinic acid | 0 |
| ex29310095 | 55 | Dimethyl[dimethylsilyldiindenyl]hafnium | 0 |
| ex29310095 | 60 | Trioctylphosphine oxide | 0 |
| ex29310095 | 65 | Triethylborane | 0 |
| ex29310095 | 70 | N,N-Dimethylanilinium tetrakis(pentafluorophenyl)borate | 0 |
| ex29310095 | 75 | {2,7-Di-tert-butyl-9-[(η5-cyclopentadienyl)bis(4-triethylsilylphenyl)methyl]-4a,4b,8a,9,9a-η-fluorene}dimethylhafnium, in the form of a solution in hexane | 0 |
| ex29310095 | 85 | Tributyl(tetradecyl)phosphonium chloride, whether or not in the form of an aqueous solution | 0 |
| ex29310095 | 86 | Mixture of the isomers 9-icosyl-9-phosphabicyclo[3.3.1]nonane and 9-icosyl-9-phosphabicyclo[4.2.1]nonane | 0 |
| ex29310095 | 87 | Tris(4-methylpentan-2-oximino)methylsilane | 0 |
| ex29310095 | 88 | Tris(4-methylpentan-2-oximino)vinylsilane | 0 |
| ex29310095 | 89 | Tetrabutylphosphonium acetate, in the form of an aqueous solution | 0 |
| ex29310095 | 95 | Trichloro(3-chloropropyl)silane | 0 |
| ex29321100 | 10 | Tetrahydrofuran, containing not more than 40 mg per litre in total of tetrahydro-2-methylfuran and tetrahydro-3-methylfuran, for the manufacture of α-4-hydroxybutyl-ω-hydroxypoly(oxytetramethylene) | 0 |
| ex29321300 | 10 | Tetrahydrofurfuryl alcohol | 0 |
| ex29321900 | 40 | Furan of a purity by weight of 99 % or more | 0 |
| ex29321900 | 50 | 2,3-Dihydrofuran | 0 |
| ex2932190070 | 70 | Furfurylamine | 0 |
| ex2932190075 | 75 | Tetrahydro-2-methylfuran | 0 |
| ex2932190080 | 80 | Octafluorotetrahydrofuran | 0 |
| ex29322980 | 10 | 2′-Anilino-6′-[ethyl(isopentyl)amino]-3′-methylspiro[isobenzofuran-1(3H),9′-xanthen]-3-one | 0 |
| ex29322980 | 15 | 13,14,15,16-Tetranorlabdano-12,8α-lactone | 0 |
| ex29322980 | 25 | 2′-(2-Chloroanilino)-6′-dibutylaminospiro[isobenzofuran-1(3H),9′-xanthen]-3-one | 0 |
| ex29322980 | 30 | 2′-Anilino-3′-methyl-6′-methyl(propyl)aminospiro[isobenzofuran-1(3H),9′-xanthen]-3-one | 0 |
| ex29322980 | 35 | 6′-Diethylamino-3′-methyl-2′-(2,4-xylidino)spiro[isobenzofuran-1(3H),9′-xanthen]-3-one | 0 |
| ex29322980 | 40 | 2′-Anilino-6′-(N-ethyl-p-toluidino)-3′-methylspiro[isobenzofuran-1(3H),9′-xanthen]-3-one | 0 |
| ex29322980 | 45 | 2′-Anilino-6′-ethyl(isobutyl)amino-3′-methylspiro[isobenzofuran-1(3H),9′-xanthen]-3-one | 0 |
| ex29322980 | 50 | 2′-Anilino-6′-cyclohexyl(methyl)amino-3′-methylspiro[isobenzofuran-1(3H),9′-xanthen]-3-one | 0 |
| ex29322980 | 55 | 6-Dimethylamino-3,3-bis(4-dimethylaminophenyl)phthalide | 0 |
| ex29322980 | 70 | 3′,6′-Bis(ethylamino)-2′,7′-dimethylspiro[isobenzofuran-1(3H),9′-[9H]-xanthen]-3-one | 0 |
| ex29322980 | 75 | Rofecoxib (INN) | 0 |
| ex29329970 | 10 | Bendiocarb (ISO) | 0 |
| ex29329970 | 20 | Androsta-1,4-diene-3,17-dione 17-(2,2-dimethylpropylene) acetal | 0 |
| ex29329970 | 50 | 5-Propyl-1,3-benzodioxole | 0 |
| ex2932997060 | 60 | Calcium bis[4-O-(β-D-galactopyranosyl)-D-gluconate] dihydrate | 0 |
| ex29331990 | 10 | 4,5-Diamino-l-(2-hydroxyethyl)-1H-pyrazole sulfate | 0 |
| ex29332100 | 10 | Hydantoin | 0 |
| ex29332100 | 20 | 2-(3-Benzyl-2,5-dioxoimidazolidin-1-yl)-2′-chloro-5′-(3-dodecylsulfonyl-2-methylpropionamido)-4,4-dimethyl-3-oxovaleranilide | 0 |
| ex29332100 | 40 | 1-[1,3-Bis(hydroxymethyl)-2,5-dioxoimidazolidin-4-yl]-1,3-bis(hydroxymethyl)urea | 0 |
| ex29332990 | 20 | Reaction product consisting of the methyl esters of (±)-6-(4-isopropyl-4-methyl-5-oxo-2-imidazolin-2-yl)-m-toluic acid and (±)-2-(4-isopropyl-4-methyl-5-oxo-2-imidazolin-2-yl)-p-toluic acid (Imazamethabenz-methyl) | 4 |
| ex29332990 | 40 | Triflumizole (ISO) | 0 |
| ex29332990 | 50 | 1,3-Dimethylimidazolidin-2-one | 0 |
| ex29333999 | 10 | Cloperastine fendizoate (INNM) | 0 |
| ex29333999 | 15 | Pyridine-2,3-dicarboxylic acid | 0 |
| ex29333999 | 20 | 5-Methyl-2-pyridylamine | 0 |
| ex29333999 | 25 | Imazethapyr (ISO) | 0 |
| ex29333999 | 30 | 4,4′-Trimethylenedipiperidine | 0 |
| ex29333999 | 60 | 2-Fluoro-6-(trifluoromethyl)pyridine | 0 |
| ex29333999 | 65 | Acetamiprid (ISO) | 0 |
| ex29333999 | 70 | Etoricoxib (INN) | 0 |
| ex29333999 | 75 | Picolinafen (ISO) | 0 |
| ex29334910 | 10 | Quinmerac (ISO) | 0 |
| ex29334990 | 20 | 5,7-Dichloro-4-(4-fluorophenoxy)quinoline | 0 |
| ex29334990 | 40 | N-Ethyl-5,6,7,8-tetrahydroquinolinium p-toluenesulfonate, in the form of a solution in water | 0 |
| ex29334990 | 50 | Methyl 2-[(S)-3-{(E)-3-[2-(7-chloro-2-quinolyl)vinyl]phenyl}-3-hydroxypropyl]benzoate monohydrate | 0 |
| ex29334990 | 60 | 5,6,7,8-Tetrahydroquinoline | 0 |
| ex29335995 | 10 | 1-Ethyl-6-fluoro-1,4-dihydro-4-oxo-7-piperazin-1-yl-1,8-naphthyridine-3-carboxylic acid and its salts and esters | 0 |
| ex29335995 | 20 | 2,4-Diamino-6-chloropyrimidine | 0 |
| ex29335995 | 30 | Mepanipyrim (ISO) | 0 |
| ex29335995 | 40 | Guanine | 0 |
| ex29335995 | 50 | 1-Chloromethyl-4-fluoro-1,4-diazoniabicyclo[2.2.2]octane bis(tetrafluoroborate) | 0 |
| ex29335995 | 60 | 2,6-Dichloro-4,8-dipiperidinopyrimido[5,4-d]pyrimidine | 0 |
| ex29335995 | 70 | N-(4-Ethyl-2,3-dioxopiperazin-1-ylcarbonyl)-D-2-phenylglycine | 0 |
| ex29335995 | 80 | N-(4-Ethyl-2,3-dioxopiperazin-1-ylcarbonyl)-D-2-(4-hydroxyphenyl)glycine | 0 |
| ex29336980 | 10 | 1,3,5-Tris(4-tert-butyl-3-hydroxy-2,6-dimethylbenzyl)-1,3,5-triazine-2,4,6(1H,3H,5H)-trione | 0 |
| ex29336980 | 20 | 1,3,5-Tris[(3,5-di-tert-butyl-4-hydroxyphenyl)methyl]-1,3,5-triazine-2,4,6(1H,3H,5H)-trione | 0 |
| ex29336980 | 40 | Cyanazine (ISO) | 0 |
| ex29336980 | 50 | 1,3,5-Tris(2,3-dibromopropyl)-1,3,5-triazinane-2,4,6-trione | 0 |
| ex29336980 | 60 | Hexazinone (ISO) | 0 |
| ex29337900 | 10 | Ezetimibe (INN) | 0 |
| ex29339930 | 10 | Azepane, for the manufacture of goods of subheading 380830 | 0 |
| ex2933993020 | 20 | 5H-Dibenz[b,f]azepine-5-carbonyl chloride | 0 |
| ex29339990 | 10 | 2-(2H-Benzotriazol-2-yl)-4,6-di-tert-butylphenol | 0 |
| ex29339990 | 15 | 2-(2H-Benzotriazol-2-yl)-4,6-di-tert-pentylphenol | 0 |
| ex29339990 | 20 | 2-(2H-Benzotriazol-2-yl)-4,6-bis(1-methyl-1-phenylethyl)phenol | 0 |
| ex29339990 | 25 | 6,6′-Di-2H-benzotriazol-2-yl-4,4′-bis(1,1,3,3-tetramethylbutyl)-2,2′-methylenediphenol | 0 |
| ex29339990 | 30 | Quizalofop-P-ethyl (ISO) | 0 |
| ex29339990 | 35 | Indoline | 0 |
| ex29339990 | 45 | Maleic hydrazide (ISO) | 0 |
| ex29339990 | 50 | Metconazole (ISO) | 3.2 |
| ex29339990 | 55 | 5-Nitroindole | 0 |
| ex29339990 | 60 | 1,3-Bis(3-isocyanatomethylphenyl)-1,3-diazetidine-2,4-dione (dimeric 2,4-toluene diisocyanate) | 0 |
| ex29339990 | 65 | Candesartan cilexetil (INNM) | 0 |
| ex29339990 | 70 | 6,7-Dihydro-5H-cyclopenta[b]pyridine | 0 |
| ex29339990 | 75 | 2,3-Dichloropyrazine | 0 |
| ex29339990 | 80 | 1-Methyltetrazole-5-thiol | 0 |
| ex29341000 | 10 | Hexythiazox (ISO) | 0 |
| ex29341000 | 20 | 2-(4-Methylthiazol-5-yl)ethanol | 0 |
| ex29341000 | 30 | 5-[(2,4-Dioxo-5-thiazolidinyl)methyl]-2-methoxy-N-{[4-(trifluoromethyl)phenyl]methyl}benzamide | 0 |
| ex29342080 | 10 | 4-Chloro-1,3-benzothiazol-2(3H)-one | 0 |
| ex29342080 | 20 | S-(1,3-Benzothiazol-2-yl) (Z)-2-(2-aminothiazol-4-yl)-2-(methoxyimino)thioacetate | 0 |
| ex29342080 | 30 | Benthiavalicarb-isopropyl (ISO) | 0 |
| ex29349990 | 10 | 7-Chloro-5-methyl-2H-1,4-benzothiazin-3-(4H)-one | 0 |
| ex29349990 | 15 | Carboxin (ISO) | 0 |
| ex29349990 | 20 | 4-[4-(Tridecyl[branched]oxy)phenyl]-1,4-thiazinane 1,1-dioxide | 0 |
| ex29349990 | 25 | Oxycarboxin (ISO) | 0 |
| ex29349990 | 30 | Etridiazole (ISO) | 0 |
| ex29349990 | 35 | Dimethenamide (ISO) | 0 |
| ex29349990 | 40 | 2,3,5,6-Tetrahydroxy-1,4-diisobutyl-1,4-dioxo-1,4-diphosphinane | 0 |
| ex29349990 | 45 | Tris(2,3-epoxypropyl)-1,3,5-triazinanetrione | 0 |
| ex29349990 | 50 | 1-[2-(1,3-Dioxan-2-yl)ethyl]-2-ethylpyridinium bromide | 0 |
| ex29349990 | 55 | Olmesartan medoxomil (INN) | 0 |
| ex29349990 | 60 | DL-Homocysteine thiolactone hydrochloride | 0 |
| ex29349990 | 65 | Methyl 3-aminothiophene-2-carboxylate | 0 |
| ex2934999072 | 72 | 1-[3-(5-Nitro-2-furyl)allylideneamino]imidazolidine-2,4-dione | 0 |
| ex2934999073 | 73 | N-(5-Mercapto-1,3,4-thiadiazol-2-yl)acetamide | 0 |
| ex29350090 | 10 | Salts of sulfathiazole (INN) | 0 |
| ex2935009015 | 15 | Flupyrsulfuron-methyl-sodium (ISO) | 0 |
| ex29350090 | 20 | Toluenesulfonamides | 0 |
| ex2935009025 | 25 | Triflusulfuron-methyl (ISO) | 0 |
| ex29350090 | 30 | Mixture of isomers consisting of N-ethyltoluene-2-sulfonamide and N-ethyltoluene-4-sulfonamide | 0 |
| ex2935009035 | 35 | Chlorsulfuron (ISO) | 0 |
| ex29350090 | 40 | 1-(4,6-Dimethoxypyrimidin-2-yl)-3-(2-ethylsulfonylimidazo[1,2-a]pyridin-3-ylsulfonyl)urea (sulfosulfuron) | 0 |
| ex2935009045 | 45 | Rimsulfuron (ISO) | 0 |
| ex29350090 | 50 | 4,4′-Oxydi(benzenesulfonohydrazide) | 0 |
| ex2935009055 | 55 | Thifensulfuron-methyl (ISO) | 0 |
| ex29350090 | 60 | 5-Amino-N-(2,6-dichloro-m-tolyl)-1H-1,2,4-triazole-3-sulfonamide | 0 |
| ex2935009065 | 65 | Tribenuron-methyl (ISO) | 0 |
| ex29350090 | 70 | Methyl 3-aminosulfonylthiophene-2-carboxylate | 0 |
| ex2935009075 | 75 | Metsulfuron-methyl (ISO) | 0 |
| ex29350090 | 80 | N-(3-Amino-2-hydroxy-4-phenylbutyl)-N-(2-methylpropyl)-4-aminobenzenesulfonamide | 0 |
| ex29350090 | 85 | N-[4-(Isopropylaminoacetyl)phenyl]methanesulfonamide hydrochloride | 0 |
| ex29350090 | 86 | 4-(m-Tolylamino)pyridine-3-sulfonamide | 0 |
| ex2935009087 | 87 | 4'-Sulfamoylacetanilide | 0 |
| ex29389090 | 10 | Hesperidin | 0 |
| 32012000 | | Wattle extract | 0 |
| ex32019090 | 10 | Tanning extracts of eucalyptus | 3.2 |
| ex32019090 | 20 | Tanning extracts derived from gambier and myrobalan fruits | 0 |
| ex32041500 | 10 | Dye C.I. Vat Orange 7 | 0 |
| ex32041500 | 20 | Dye C.I. Vat Red 15 | 0 |
| ex32041500 | 30 | Dye C.I. Vat Red 14 | 0 |
| ex32041500 | 40 | Dye C.I. Vat Brown 57 | 0 |
| ex32041500 | 50 | Dye C.I. Vat Blue 47 | 0 |
| ex32041700 | 10 | Dye C.I. Pigment Yellow 81 | 0 |
| ex32041900 | 10 | Nickel bis{4-methoxy-2-[6-(pentafluoroethylthio)benzothiazol-2-ylazo]-5-(dipropylamino)benzenesulfonate} | 0 |
| ex32041900 | 15 | 4-{4-[3-(4-Methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-3-yl]phenyl}morpholine | 0 |
| ex32041900 | 20 | 13-Ethyl-3-[4-(morpholino)phenyl]-3-phenyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-13-ol | 0 |
| ex32041900 | 25 | Cyclohexyl 8-methyl-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate | 0 |
| ex32041900 | 30 | 13-Isopropyl-3,3-bis(4-methoxyphenyl)-6,11-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-13-ol | 0 |
| ex32041900 | 35 | 13-Butyl-13-ethoxy-6,11-dimethoxy-3,3-bis(4-methoxyphenyl)-3,13-dihydrobenzo[h]indeno[2,1-f]chromene | 0 |
| ex32041900 | 40 | Methyl 8′-acetoxy-1,3,3,5,6-pentamethyl-2,3-dihydrospiro[1H-indole-2,3′-naphtho[2,1-b][1,4]oxazine]-9′-carboxylate | 0 |
| ex32041900 | 45 | 6,7-Dimethoxy-3,3-bis(4-methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromene | 0 |
| ex32041900 | 50 | Methyl 6-(isobutyryloxy)-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate | 0 |
| ex32041900 | 60 | Ethoxycarbonylmethyl 8-methyl-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate | 0 |
| ex32041900 | 70 | Dye C.I. Solvent Red 49 | 0 |
| ex32061100 | 10 | Titanium dioxide coated with isopropoxytitanium triisostearate, containing by weight 1,5 % or more but not more than 2,5 % of isopropoxytitanium triisostearate | 0 |
| ex32061900 | 10 | Preparation based on titanium dioxide, containing by weight 66 % or more but not more than 71 % of titanium dioxide and 1 % or more but not more than 2 % of isopropoxytitanium triisostearate | 0 |
| ex32064200 | 10 | Lithopone | 0 |
| ex32064990 | 10 | Black preparation of iron-oxide pigments, in liquid form, with a maximum particle size not exceeding 20 nanometres and containing by weight 25 % or more of iron evaluated as Fe2O3, for the manufacture of goods of heading No 3304 or 9608 | 0 |
| 32065000 | | Inorganic products of a kind used as luminophores | 0 |
| ex32074080 | 20 | Glass flakes coated with silver, of an average diameter of 40 (± 10) µm | 0 |
| ex3207408030 | 30 | Glass frit, for use in the manufacture of cathode-ray tubes | 0 |
| ex32082010 | 10 | Copolymer of N-vinylcaprolactam, N-vinyl-2-pyrrolidone and dimethylaminoethyl methacrylate, in the form of a solution in ethanol containing by weight 34 % or more but not more than 40 % of copolymer | 0 |
| ex32082010 | 20 | Copolymer of vinylpyrrolidone and dimethylaminoethyl methacrylate, partially quaternized by diethyl sulfate, in the form of a solution in ethanol | 0 |
| ex39059100 | 92 |
| ex32082010 | 30 | Solution of diundecyl phthalate and a copolymer of dibutyl maleate and isobutyl methacrylate in a hydrocarbon solvent | 0 |
| ex32089019 | 10 | Copolymer of maleic acid and methyl vinyl ether, monoesterified with ethyl and/or isopropyl and/or butyl groups, in the form of a solution in ethanol, ethanol and butanol, isopropanol or isopropanol and butanol | 0 |
| ex39119099 | 35 |
| ex32089019 | 20 | Copolymer of polyurethane and silicone, in the form of a solution in a mixture of butanone, toluene and cyclohexanone, containing by weight 13 % or more but not more than 16 % of copolymer | 0 |
| ex32089019 | 30 | Solution containing:- (30 ± 5) % by weight of polyamide resin,
- (6,5 ± 3,5) % by weight of diazonaphthoquinone,
- (55 ± 5) % by weight of 1-methyl-2-pyrrolidone,
- 1000 µg/kg or less of chloride,
- 1000 µg/kg or less of potassiumand
- 1000 µg/kg or less of iron
| 0 |
| ex32089019 | 40 | Polymer of methylsiloxane, in the form of a solution in a mixture of acetone, butanol, ethanol and isopropanol, containing by weight 5 % or more but not more than 11 % of polymer of methylsiloxane | 0 |
| ex32089019 | 50 | Solution containing by weight:- (65 ± 10) % of γ-butyrolactone,
- (30 ± 10) % of polyamide resin,
- (3,5 ± 1,5) % of naphthoquinone ester derivativeand
- (1,5 ± 0,5) % of arylsilicic acid
| 0 |
| ex32089019 | 60 | Anti-reflection coating, consisting of amino-resin and modified phenolic resin, in the form of a solution in 1-methoxypropan-2-ol and ethyl lactate, containing by weight 15 % or more but not more than 24 % of both polymers taken together | 0 |
| ex32089019 | 70 | Anti-reflection coating, consisting of a modified methacrylic polymer, containing by weight not more than 10 % of polymer, in the form of a solution in 2-methoxy-1-methylethyl acetate and 1-methoxypropan-2-ol | 0 |
| ex37079090 | 10 |
| ex32089019 | 80 | Anti-reflection coating, consisting of a copolymer of hydroxystyrene and methyl methacrylate, modified with chromophore groups, containing by weight not more than 10 % of polymer, in the form of a solution in 1-methoxypropan-2-ol and ethyl lactate | 0 |
| ex37079090 | 20 |
| ex32089099 | 10 | Solution based on chemically modified natural polymers, containing two or more of the following dyes:- methyl 8′-acetoxy-1,3,3,5,6-pentamethyl-2,3-dihydrospiro[1H-indole-2,3′-naphtho[2,1-b][1,4]oxazine]-9′-carboxylate,
- methyl 6-(isobutyryloxy)-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate,
- 13-isopropyl-3,3-bis(4-methoxyphenyl)-6,11-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-13-ol,
- ethoxycarbonylmethyl 8-methyl-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate,
- 13-ethyl-3-[4-(morpholino)phenyl]-3-phenyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-13-ol
| 0 |
| ex32089099 | 20 | Solution based on chemically modified natural polymers, containing two or more of the following dyes:- 4-[4-(13,13-dimethyl-3-phenyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-3-yl)phenyl]morpholine,
- 4-{4-[3-(4-methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-3-yl]phenyl}morpholine,
- cyclohexyl 8-methyl-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate,
- ethoxycarbonylmethyl 6-acetoxy-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate,
- 2-pentyl-7,7-diphenylbenzo[h]chromeno[6,5-d]-1,3-dioxin-4(7H)-one,
- 13-butyl-13-ethoxy-6,11-dimethoxy-3,3-bis(4-methoxyphenyl)-3,13-dihydrobenzo[h]indeno[2,1-f]chromene,
- 3-(4-methoxyphenyl)-13,13-dimethyl-3-phenyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromene,
- 6,7-dimethoxy-3,3-bis(4-methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromene
| 0 |
| ex3215110010 | 10 | Printing ink, liquid, consisting of a dispersion of a vinyl acrylate copolymer and colour pigments in isoparaffins, containing by weight not more than 13 % of vinyl acrylate copolymer and colour pigments | 0 |
| ex3215190010 | 10 |
| ex32159080 | 10 | Ink formulation, for use in the manufacture of ink-jet cartridges | 0 |
| ex32159080 | 20 | Heat sensitive ink fixed on a plastic film | 0 |
| ex32159080 | 30 | Ink preparation, in the form of powder, for use in the manufacture of ink-filled bottles of a kind used in colour digital presses of subheading 844319 | 0 |
| ex3215908030 | 30 | Ink preparation, in the form of powder, for use in the manufacture of ink-filled bottles of a kind used in colour digital presses of heading No 8443 | 0 |
| 33011210 | | Essential oil of orange, not deterpenated | 0 |
| ex34029010 | 20 | Mixture of docusate sodium (INN) and sodium benzoate | 0 |
| ex34029010 | 30 | Non-aqueous surface-active preparation, containing:- polyethylene glycol alkylphenyl ether,
- 2,4,7,9-tetramethyldec-5-yne-4,7-dioland
- phosphoric acid esters
| 0 |
| ex34029090 | 10 | Crystalline powder obtained by the reaction of trisodium phosphate with a mixture of sodium hypochlorite and sodium chloride ("chlorinated trisodium phosphate"), containing by weight:- 3,5 % or more of available chlorine, measured iodometricallyand
- 17,0 % or more of phosphorus evaluated as P2O5
| 0 |
| ex34039990 | 10 | Cutting-fluid preparation based on an aqueous solution of synthetic polypeptides | 0 |
| ex35040000 | 10 | Purified antigens obtained from genetically manipulated yeast cells, for the manufacture of detection tests for hepatitis-C | 0 |
| ex35040000 | 20 | Glycoprotein 160 obtained from Human Immunodeficiency Virus, HIV-1 strain | 0 |
| ex35051050 | 20 | O-(2-Hydroxyethyl)-derivative of hydrolysed maize starch | 0 |
| ex35069100 | 10 | Adhesive based on an aqueous dispersion of a mixture of dimerised rosin and a copolymer of ethylene and vinyl acetate (EVA) | 0 |
| ex35069100 | 20 | Heat-activated adhesive based on phenolic resin and rubber, in the form of a film on a release paper, for use in the manufacture of brake pads for the automotive industry | 0 |
| ex35079090 | 10 | Asparaginase | 0 |
| ex35079090 | 20 | Enzymatic preparation based on thermolysine | 0 |
| ex35079090 | 40 | Avian myeloblastosis virus (AMV) reverse transcriptase | 0 |
| ex35079090 | 60 | Trypsin certified to be produced in compliance with EC Good Manufacturing Practice (cGMP) and having a specific enzyme activity of 0,45 µkat/mg or more, for the manufacture of goods of heading No 3004 | 0 |
| ex35079090 | 70 | Chymotrypsin | 0 |
| ex37013000 | 10 | Relief printing plate, of a kind used for printing on newsprint, consisting of a metal substrate coated with a photopolymer layer of a thickness of 0,2 mm or more but not exceeding 0,8 mm, not covered with a release film, of a total thickness not exceeding 1 mm | 0 |
| ex37019900 | 10 | Plate of quartz or of glass, covered with a film of chromium and coated with a photosensitive or electron-sensitive resin, for the manufacture of masks for the goods of heading No 8541 or 8542 | 0 |
| ex37023199 | 10 | Colour negative film, for the manufacture of instant-picture film-packs | 0 |
| ex37024300 | 10 | Photographic film, of a nominal width of 459, 669 or 761 mm, composed of several layers, including two polyester films, a carbon layer, an adhesive layer, whether or not with a layer of a copolymer of styrene with acrylonitrile | 0 |
| ex37024400 | 10 |
| ex37039010 | 10 | Paper sheet, coated with silver halide emulsion, for the manufacture of goods of subheading 37012000 | 0 |
| ex37071000 | 10 | Photosensitive emulsion for the sensitization of silicon discs | 0 |
| ex37071000 | 20 | Sensitising emulsion, consisting of diazooxonaphthalenesulfonic acid ester and phenolic resins, containing by weight not more than 6 % of diazooxonaphthalenesulfonic acid ester, in 2-methoxy-1-methylethyl acetate | 0 |
| ex37079030 | 10 | Toner, in the form of powder, consisting of a copolymer of styrene and butyl acrylate and either magnetite or carbon black, for use as a developer in the manufacture of cartridges for facsimile machines or computer printers | 0 |
| ex3707903020 | 20 | Toner, based on a polyol resin, in the form of powder | 0 |
| ex3707903030 | 30 | Two-component toner, liquid, in the form of a set consisting of a container containing a dispersion of a vinyl acrylate copolymer and colour pigments in isoparaffins, containing by weight not more than 13 % of vinyl acrylate copolymer and colour pigments, and a container containing isoparaffins | 0 |
| ex37079090 | 30 | Anti-reflection coating, in the form of an aqueous solution, containing by weight:- not more than 2 % of perhalogenated sulfonic acid derivatives,
- not more than 1 % of a vinyl polymer
| 0 |
| ex38249099 | 91 |
| ex3801209010 | 10 | Colloidal graphite in suspension in water, for use as internal coating in colour cathode-ray tubes | 0 |
| 38052000 | | Pine oil | 1.7 |
| ex38081090 | 10 | Indoxacarb (ISO) and its (R) isomer, fixed on a support of silicon dioxide | 0 |
| ex38081090 | 20 | Preparation containing by weight 2 % or more but not more than 4 % of azadirachtin (ISO), not put up for retail sale | 0 |
| ex38081090 | 30 | Preparation containing endospores and protein crystals derived from the hybrid strain GC 91 of Bacillus thuringiensis Berliner subsp. aizawai and kurstaki | 0 |
| ex38082080 | 10 | Fungicide in the form of a powder, containing by weight 65 % or more but not more than 75 % of hymexazole (ISO), not put up for retail sale | 0 |
| ex38082080 | 20 | Preparation based on diiodomethyl p-tolyl sulfone, not put up for retail sale | 0 |
| ex38082080 | 30 | Preparation consisting of a suspension of pyrithione zinc (INN) in water, containing by weight 24 % or more but not more than 26 % of pyrithione zinc (INN) | 0 |
| ex38084020 | 10 | Preparation containing by weight:- 58 % or more but not more than 62 % of 1-bromo-3-chloro-5,5-dimethylhydantoin,
- 26 % or more but not more than 29 % of 1,3-dichloro-5,5-dimethylhydantoin,
- 10 % or more but not more than 12 % of 1,3-dichloro-5-ethyl-5-methylhydantoin,
for the manufacture of swimming-pool disinfectants | 0 |
| ex38084090 | 10 | 1-Dodecylguanidine hydrochloride, in the form of a solution in isopropanol and water, containing by weight 40 % or less of 1-dodecylguanidine hydrochloride | 0 |
| ex38099100 | 10 | Mixture of 5-ethyl-2-methyl-2-oxo-1,3,2λ5-dioxaphosphoran-5-ylmethyl methyl methylphosphonate and bis(5-ethyl-2-methyl-2-oxo-1,3,2λ5-dioxaphosphoran-5-ylmethyl) methylphosphonate | 0 |
| ex38099200 | 10 | Paper anti-fading agent, consisting of a mixture of magnesium trisilicate and monosodium salt of 2,2′-methylenebis(4,6-di-tert-butylphenyl) phosphate | 0 |
| ex38112100 | 10 | Salts of dinonylnaphthalenesulfonic acid, in the form of a solution in mineral oils | 0 |
| ex38112100 | 20 | Additives for lubricating oils, based on complex organic molybdenum compounds, in the form of a solution in mineral oil | 0 |
| ex38123080 | 20 | Mixture containing predominantly bis(2,2,6,6-tetramethyl-1-octyloxy-4-piperidyl) sebacate | 0 |
| ex38123080 | 30 | Compound stabilisers containing by weight 15 % or more but not more than 40 % of sodium perchlorate and not more than 70 % of 2-(2-methoxyethoxy)ethanol | 0 |
| ex38140090 | 10 | Mixture containing by weight 25 % or more but not more than 35 % of dimethyl sulfoxide and 65 % or more but not more than 75 % of monoethanolamine | 3 |
| ex3814009020 | 20 | Mixture containing by weight:- 69 % or more but not more than 71 % of 1-methoxypropan-2-ol,
- 29 % or more but not more than 31 % of 2-methoxy-1-methylethyl acetate
| 0 |
| ex3814009030 | 30 | Azeotrope mixture containing by weight 30 % or more but not more than 50 % of trans-dichloroethylene and a mixture of isomers of nonafluorobutyl methyl ether or nonafluorobutyl ethyl ether | 0 |
| ex38151200 | 10 | Catalyst, in the form of granules or rings of a diameter of 3 mm or more but not exceeding 10 mm, consisting of silver on an aluminium oxide support and containing by weight 8 % or more but not more than 40 % of silver | 0 |
| ex38151200 | 20 | Catalyst consisting of palladium and rhenium, fixed on a support of active carbon, in the form of powder, containing:- 0,5 % or more but not more than 1,5 % by weight of palladium,
- 3 % or more but not more than 5 % by weight of rheniumand
- 0,1 mole % or more but not more than 1 mole % of alkaline metals,
for use in the manufacture of tetrahydrofuran | 0 |
| ex38151200 | 30 | Catalyst, consisting of platinum and palladium fixed on a support, containing by weight:- not more than 1,5 % of platinum,
- not more than 1,5 % of palladiumand
- not more than 0,1 % of alkali metals,
for use in hydrogenation of white oils | 0 |
| ex38151990 | 10 | Catalyst, consisting of chromium trioxide or dichromium trioxide fixed on a support of silicon dioxide, of a pore volume, as determined by the nitrogen absorption method, of 2 cm3/g or more | 0 |
| ex38151990 | 15 | Catalyst, in the form of a powder, consisting of a mixture of metal oxides fixed on a support of silicon dioxide, containing by weight 20 % or more but not more than 40 % of molybdenum, bismuth and iron evaluated together, for use in the manufacture of acrylonitrile | 0 |
| ex38151990 | 20 | Catalyst consisting of chromium oxides and titanium dioxide fixed on a support of silicon dioxide, aluminium oxide or aluminium phosphate | 0 |
| ex38151990 | 30 | Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polypropylene | 0 |
| ex3815199035 | 35 | Catalyst, in the form of rodlets of a length of 5,5 mm or more but not exceeding 6,5 mm, consisting of copper oxide and zinc oxide fixed on a support of aluminium oxide, containing by weight:- 55 % or more but not more than 60 % of copper oxide
and- 30 % or more but not more than 35 % of zinc oxide
| 0 |
| ex38151990 | 40 | Catalyst, in the form of spheres of a diameter of 4,2 mm or more but not exceeding 9 mm, consisting of a mixture of metals oxides containing predominantly oxides of molybdenum, vanadium and copper, on a support of silicon dioxide and/or aluminium oxide, for use in the manufacture of acrylic acid | 0 |
| ex38151990 | 45 | Catalyst, consisting predominantly of dichromium copper tetraoxide and copper (II) oxide, containing by weight 38 % or more but not more than 48 % of copper, evaluated as copper (II) oxide, fixed on a support of silicon dioxide, for the hydrogenation of acetophenones | 0 |
| ex38151990 | 50 | Catalyst consisting of organo-metallic compounds of titanium, magnesium and aluminium on a support of silicon dioxide, in the form of a suspension in tetrahydrofuran | 0 |
| ex38151990 | 55 | Catalyst consisting of a mixture of metal oxides containing chromium trioxide, fixed on a support of silicon dioxide | 0 |
| ex38151990 | 60 | Catalyst consisting of dichromium trioxide, fixed on a support of aluminium oxide | 0 |
| ex38151990 | 65 | Catalyst consisting of phosphoric acid chemically bonded to a support of silicon dioxide | 0 |
| ex38151990 | 70 | Catalyst consisting of organo-metallic compounds of aluminium and zirconium, fixed on a support of silicon dioxide | 0 |
| ex38151990 | 75 | Catalyst consisting of organo-metallic compounds of aluminium and chromium, fixed on a support of silicon dioxide | 0 |
| ex38151990 | 80 | Catalyst consisting of organo-metallic compounds of magnesium and titanium, fixed on a support of silicon dioxide, in the form of a suspension in mineral oil | 0 |
| ex38151990 | 85 | Catalyst consisting of organo-metallic compounds of aluminium, magnesium and titanium, fixed on a support of silicon dioxide, in the form of powder | 0 |
| ex38159090 | 15 | Catalyst, consisting of a mixture of oxides containing by weight more than 96 % of oxides of molybdenum, vanadium, nickel and antimony, whether or not mixed with porcelain balls, for use in the manufacture of acrylic acid | 0 |
| ex38159090 | 20 | Catalyst, in powder form, consisting of a mixture of titanium trichloride and aluminium chloride, containing by weight:- 20 % or more but not more than 30 % of titaniumand
- 55 % or more but not more than 72 % of chlorine
| 0 |
| ex38159090 | 25 | Catalyst, consisting of a mixture of oxides containing by weight more than 96 % of oxides of molybdenum, bismuth, nickel, iron and silicon, whether or not mixed with porcelain balls, for use in the manufacture of acrylaldehyde | 0 |
| ex38159090 | 30 | Catalyst, in the form of a powder, containing by weight 82 % or more of copper and of a specific surface of 0,5 m2/g or more but not exceeding 8 m2/g | 0 |
| ex38159090 | 35 | Catalyst, in the form of a suspension in oil, consisting of titanium trichloride and aluminium trichloride, containing by weight (on an oil-free basis):- 15 % or more but not more than 30 % of titaniumand
- 40 % or more but not more than 72 % of chlorine
| 0 |
| ex38159090 | 40 | Catalyst, in the form of rodlets of a length of 5 mm or more but not exceeding 8 mm, consisting of a mixture of metals oxides containing predominantly oxides of iron, molybdenum and bismuth, whether or not containing silicon dioxide as filler, for use in the manufacture of acrylic acid | 0 |
| ex38159090 | 50 | Catalyst containing titanium trichloride, in the form of a suspension in hexane or heptane containing by weight, in the hexane- or heptane-free material, 9 % or more but not more than 30 % of titanium | 0 |
| ex38159090 | 60 | Catalyst, in the form of rodlets, consisting of an acid aluminosilicate (zeolite):- with a mole-ratio of silicon dioxide: dialuminium trioxide of not less than 500: 1and
- containing by weight 0,2 % or more but not more than 0,8 % of platinum
| 0 |
| ex38159090 | 65 | Catalyst based on a mordenite zeolite, in the form of granules, for use in the manufacture of mixtures of methylamines containing by weight 50 % or more of dimethylamine | 0 |
| ex38159090 | 70 | Catalyst, consisting of a mixture of (2-hydroxypropyl)trimethylammonium formate and dipropylene glycols | 0 |
| ex38159090 | 75 | Catalyst, consisting of a mixture of 1,4-diazabicyclo[2.2.2]octane, 2-hydroxyethyliminodi(acetic acid) and dibutyltin di(acetate), containing by weight 5 % or more but not more than 10 % of 1,4-diazabicyclo[2.2.2]octane | 0 |
| ex38159090 | 80 | Catalyst consisting predominantly of dinonylnaphthalenedisulfonic acid in the form of a solution in isobutanol | 0 |
| ex38159090 | 81 | Catalyst, containing by weight 38 % or more but not more than 48 % of (2-hydroxy-1-methylethyl)trimethylammonium 2-ethylhexanoate | 0 |
| ex38159090 | 82 | Catalyst, containing by weight 35 % or more but not more than 55 % of (2-hydroxy-1-methylethyl)trimethylammonium formate and formic acid | 0 |
| ex38159090 | 83 | Catalyst, in the form of powder, containing aluminium magnesium hydroxide hydrate, rare-earth metals oxides and divanadium pentaoxide | 0 |
| ex38159090 | 85 | Catalyst based on aluminosilicate (zeolite), for the transalkylation of alkylaromatic hydrocarbons or the oligomerization of olefins | 0 |
| ex38159090 | 86 | Catalyst, in the form of rodlets, consisting of an aluminosilicate (zeolite), containing by weight 2 % or more but not more than 3 % of rare-earth metals oxides and less than 1 % of disodium oxide | 0 |
| ex38159090 | 87 | Reaction initiator, consisting of diisopropyl peroxydicarbonate, in the form of a solution in diallyl 2,2′-oxydiethyl dicarbonate | 0 |
| ex38231910 | 91 | Mixture of fatty acids containing by weight:- 2 % or more but not more than 6 % of hexanoic acid,
- 53 % or more but not more than 60 % of octanoic acid,
- 34 % or more but not more than 42 % of decanoic acidand
- not more than 2 % of dodecanoic acid
| 0 |
| ex38249015 | 10 | Acid aluminosilicate (artificial zeolite of the Y type) in the sodium form, containing by weight not more than 11 % of sodium evaluated as sodium oxide, in the form of rodlets | 0 |
| ex38249064 | 01 | Intermediate products of the antibiotics manufacturing process obtained from the fermentation of Micromonospora purpurea, whether or not dried | 0 |
| ex38249064 | 02 | Cholic acid and 3α,12α-dihydroxy-5β-cholan-24-oic acid (deoxycholic acid), crude | 0 |
| ex38249064 | 03 | Products obtained by the N-ethylation of sisomycin (INN) | 0 |
| ex38249064 | 04 | Intermediate products of the antibiotics manufacturing process obtained from the fermentation of Micromonospora inyoensis, whether or not dried | 0 |
| ex38249064 | 05 | Residues of manufacture containing by weight 40 % or more of 11β,17,20,21-tetrahydroxy-6-methylpregna-1,4-dien-3-one 21-acetate | 0 |
| ex38249099 | 01 | Colloidal diantimony pentaoxide | 0 |
| ex38249099 | 02 | Mixture of nitromethane and 1,2-epoxybutane | 0 |
| ex38249099 | 03 | Grains or granules, consisting of a mixture of dialuminium trioxide and zirconium dioxide, containing by weight:- 70 % or more but not more than 78 % of dialuminium trioxideand
- 19 % or more but not more than 26 % of zirconium dioxide
| 5.2 |
| ex38249099 | 04 | Crude lithium hypochlorite | 0 |
| ex38249099 | 05 | Polysilicate, modified with phosphoric acid, in the form of a solution in a mixture of ethanol, isopropanol and tetrahydrofuran, containing by weight 3 % or more but not more than 6 % of polysilicate | 0 |
| ex38249099 | 06 | Preparation in the form:- of powder, containing by weight 75 % or more of zinc bis[3,5-bis(1-phenylethyl)salicylate]or
- of aqueous dispersion, containing by weight 22 % or more but not more than 55 % of zinc bis[3,5-bis(1-phenylethyl)salicylate]
| 0 |
| ex38249099 | 07 | Film consisting of the oxides of either barium or calcium and either titanium or zirconium, mixed with binding materials | 0 |
| ex38249099 | 08 | Preparation consisting essentially of alkaline asphalt sulfonate, of:- a specific gravity of 0,9 or more but not exceeding 1,5and
- a solubility in water of 70 % by weight or more
| 0 |
| ex38249099 | 09 | Anti-corrosion preparations consisting of salts of dinonylnaphthalenesulfonic acid, either:- on a support of mineral wax, whether or not modified chemically,or
- in the form of a solution in an organic solvent
| 0 |
| ex38249099 | 10 | Calcined bauxite (refractory grade) | 0 |
| ex38249099 | 11 | Magnetisable iron oxide, in the form of powder, containing by weight:- 30 % or more but not more than 38 % of bivalent iron in relation to the total ironand
- 1 % or more but not more than 4 % of cobalt
| 0 |
| ex38249099 | 13 | Mixture containing by weight:- 7 % or more but not more than 9 % of 2-methyl-1,3-phenylene diisocyanate,
- 31 % or more but not more than 34 % of 4-methyl-1,3-phenylene diisocyanate,
- 10 % or more but not more than 13 % of 2,4′-methylenediphenyl diisocyanate,
- 46 % or more but not more than 49 % of 4,4′-methylenediphenyl diisocyanate
| 0 |
| ex38249099 | 14 | Mixture of magnesium bromide 2-oxoperhydroazepin-1-ide and ε-caprolactam | 0 |
| ex38249099 | 15 | Mixture of disodium N-benzyloxycarbonyl-L-aspartate and sodium chloride, in the form of a solution in water | 0 |
| ex38249099 | 16 | Disodium 9,10-dihydro-9,10-dioxoanthracene-2,7-disulfonate, containing by weight 10 % or more but not more than 20 % of sodium sulfate | 0 |
| ex38249099 | 17 | Eutectic alloy wholly of potassium and sodium, containing by weight 77 % or more but not more than 79 % of potassium | 0 |
| ex38249099 | 18 | Blend of terephthaloyl dichloride and isophthaloyl dichloride | 0 |
| ex38249099 | 20 | Preparation consisting by weight of 83 % or more of 3a,4,7,7a-tetrahydro-4,7-methanoindene (dicyclopentadiene), a synthetic rubber, whether or not containing by weight 7 % or more of tricyclopentadiene, and:- either an aluminium-alkyl compound,
- or an organic complex of tungsten
- or an organic complex of molybdenum
| 0 |
| ex38249099 | 21 | Mixture of tris[2-chloro-1-(chloromethyl)ethyl] phosphate and oligomers of methylphosphonic acid and phosphoric acid with ethane-1,2-diol | 0 |
| ex38249099 | 22 | Mixture of tris[2-chloro-1-(chloromethyl)ethyl] phosphate and oligomers of 2-chloroethyl phosphate with ethane-1,2-diol | 0 |
| ex38249099 | 23 | Mixture of sucrose esters, derived from the esterification of sucrose with industrial stearic acid | 0 |
| ex38249099 | 24 | Preparations consisting predominantly of phosphabicyclononanes and P-alkyl derivatives thereof, in the form of a solution in 4-tert-butyltoluene | 0 |
| ex38249099 | 25 | Lithium tantalate wafers, undoped | 0 |
| ex38249099 | 28 | Preparation consisting predominantly of ethylene glycol and N,N-dimethylformamide or ethylene glycol and γ-butyrolactone, for the manufacture of electrolytic capacitors | 0 |
| ex38249099 | 29 | Preparation consisting predominantly of γ-butyrolactone and quaternary ammonium salts, for the manufacture of electrolytic capacitors | 0 |
| ex38249099 | 30 | 2,4,7,9-Tetramethyldec-5-yne-4,7-diol, hydroxyethylated | 0 |
| ex38249099 | 31 | Copper zinc ferrite, coated with a silicone resin, in the form of granules of a size not exceeding 120 µm | 0 |
| ex38249099 | 32 | Styrene oligomer | 0 |
| ex38249099 | 33 | Preparation consisting of α-(4-allyloxycarbonylbenzoyl)-ω-allyloxypoly[oxy(2-methylethylene)oxyterephthaloyl] and either diallyl-2,2′-oxydiethyl dicarbonate or diallyl isophthalate | 0 |
| ex38249099 | 35 | Nitrosylsulfuric acid of a purity by weight of 70 % or more but not exceeding 73 % | 0 |
| ex38249099 | 36 | Mixtures of silanol and diphosphorus pentaoxide, in the form of a solution in a mixture of ethanol and ethyl acetate, containing by weight 6 % or more but not more than 10 % of silanol and 0,1 % or more but not more than 0,3 % of diphosphorus pentaoxide | 0 |
| ex38249099 | 37 | Sintered bauxite pellets, of a diameter not exceeding 2 mm | 0 |
| ex38249099 | 39 | Mixture containing by weight 40 % or more but not more than 50 % of 2-hydroxyethyl methacrylate and 40 % or more but not more than 50 % of glycerol ester of boric acid | 0 |
| ex38249099 | 40 | Azelaic acid of a purity by weight of 75 % or more but not exceeding 85 % | 0 |
| ex38249099 | 42 | Mixed metals oxides, in the form of powder, containing by weight:- either 5 % or more of barium, neodymium or magnesium and 15 % or more of titanium,
- or 30 % or more of lead and 5 % or more of niobium,
for use in the manufacture of dielectric films or for use as dielectric materials in the manufacture of multilayer ceramic capacitors | 0 |
| ex38249099 | 43 | 7-Aminonaphthalene-1,3,6-trisulfonic acid and its salts, of a purity by weight of 65 % or more | 0 |
| ex38249099 | 44 | Mixture containing by weight:- 60 % or more of 2-[N-(2-cyanoethyl)anilino]ethyl acetateand
- 20 % or more of acetic acid
| 0 |
| ex38249099 | 45 | Preparations consisting predominantly of ethylene glycol and:- either diethylene glycol, dodecandioic acid and ammonia water,
- or silicon oxide,
- or ammonium hydrogen azelate,
- or ammonium hydrogen azelate and silicon oxide,
- or dodecandioic acid, ammonia water and silicon oxide,
for the manufacture of electrolytic capacitors | 0 |
| ex38249099 | 46 | Carboxylic acid anhydride based hardener for epoxyde resin, in liquid form, of a specific weight at 25 oC of 1,15 g/cm3 or more but not exceeding 1,18 g/cm3 | 0 |
| ex38249099 | 49 | Mixed oxides of metals, in the form of powder, containing by weight:- 70 % or more but not more than 75 % of iron oxide,
- 10 % or more but not more than 20 % of zinc oxide,
- 10 % or more but not more than 15 % of magnesium oxide,
- 1 % or more but not more than 5 % of manganese oxideand
- 1 % or more but not more than 3 % of copper oxide
| 0 |
| ex38249099 | 50 | Zeolites consisting of oxides of barium, aluminium and silicon, containing by weight 30 % or more but not more than 40 % of barium oxide, in the form of spheres of which 80 % or more by weight have a diameter of 0,3 mm or more but not more than 1,2 mm | 0 |
| ex38249099 | 53 | Sodium 4-hydroxynaphthalene-1-sulfonate, of a purity by weight of 70 % or more but not exceeding 80 % | 0 |
| ex38249099 | 54 | 2-Hydroxybenzonitrile, in the form of a solution in N,N-dimethylformamide, containing by weight 45 % or more but not more than 50 % of 2-hydroxybenzonitrile | 0 |
| ex38249099 | 55 | Mixture containing by weight 75 % or more of pentaerythritol triallyl ether | 0 |
| ex38249099 | 57 | Mixture of trialkylphosphine oxides | 0 |
| ex38249099 | 58 | Platinum oxide fixed on a porous support of aluminium oxide, containing by weight 0,1 % or more but not more than 1 % of platinum and 0,5 % or more but not more than 5 % of ethylaluminium dichloride | 0 |
| ex38249099 | 60 | α-Phenoxycarbonyl-ω-phenoxypoly[oxy(2,6-dibromo-1,4-phenylene)isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] | 0 |
| ex38249099 | 61 | Mixture of metal oxides, in the form of powder, containing by weight:- 20 % or more of barium,
- 10 % or more of titaniumand
- 4 % or more of lead or 3 % or more of niobium or 0,7 % or more of zirconium,
for use as dielectric material in the manufacture of multilayer ceramic capacitors | 0 |
| ex38249099 | 63 | Triethylborane, in the form of a solution in tetrahydrofuran | 0 |
| ex38249099 | 64 | Aluminium sodium silicate, in the form of spheres of a diameter of:- either 1,6 mm or more but not exceeding 3,4 mm,
- or 4 mm or more but not exceeding 6 mm
| 0 |
| ex38249099 | 65 | Mixture of tris(alkoxycarbonylamino)-1,3,5-triazines in which alkoxy groups are methoxy and butoxy | 0 |
| ex38249099 | 66 | Mixture of primary tert-alkylamines | 0 |
| ex38249099 | 67 | Preparation consisting of indium tin oxide dispersed in organic solvents | 0 |
| ex38249099 | 72 | Solution containing by weight 80 % or more of 2,4,6-trimethylbenzaldehyde in acetone | 0 |
| ex38249099 | 73 | Particles of silicon dioxide on which are covalently bonded organic compounds, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges | 0 |
| ex38249099 | 75 | Mixture of 2,2-bis[2-(perfluoroalkyl)ethylthiomethyl]propane-1,3-diols | 0 |
| ex38249099 | 77 | Diethylmethoxyborane, in the form of a solution in tetrahydrofuran | 0 |
| ex38249099 | 81 | Calcium oxide stabilised zirconia in the form of lumps of which 94 % or more by weight is retained on a 16 mm sieve, containing by weight:- 92 % or more of zirconium dioxide and
- 2 % or more but not more than 6 % of calcium oxide
| 0 |
| ex38249099 | 82 | α-(2,4,6-Tribromophenyl)-ω-(2,4,6-tribromophenoxy)poly[oxy(2,6-dibromo-1,4-phenylene)isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] | 0 |
| ex39074000 | 20 |
| ex38249099 | 83 | Mixture containing:- unsaturated, dimerised fatty acids, hydrogenated and polymerized with ethylenediamine and octadecan-1-ol,
- white oil,
- 2-methylpentane-2,4-dioland
- glycerides of decanoic and octanoic acids
| 0 |
| ex38249099 | 84 | Reaction product, containing by weight:- 1 % or more but not more than 40 % of molybdenum oxide,
- 10 % or more but not more than 50 % of nickel oxide,
- 30 % or more but not more than 70 % of tungsten oxide
| 0 |
| ex38249099 | 85 | Particles of magnesium sodium silicate on which are ionically bonded chiral complexes of tris(1,10-phenanthroline)ruthenium, for use in the manufacture of high performance liquid chromatography columns (HPLC) | 0 |
| ex38249099 | 86 | Anti-reflection coating, containing by weight:- 30 % or more but not more than 40 % of cyclohexanone,
- 30 % or more but not more than 40 % of 1-methyl-2-pyrrolidone,
- 20 % or more but not more than 30 % of tetrahydrofurfuryl alcohol
| 0 |
| ex38249099 | 88 | Oligomeric reaction product, consisting of bis(4-hydroxyphenyl) sulfone and 1,1′-oxybis(2-chloroethane) | 0 |
| ex38249099 | 89 | Oligomer of tetrafluoroethylene, having tetrafluoroiodoethyl end-groups | 0 |
| ex3824909992 | 92 | Bis{4-[(5-chloro-2-hydroxyphenyl)azo]-3-hydroxy-N-phenyl-2-naphthalene= carboxyamidate}ferrate with a mixture of ammonium, sodium and hydrogen cations | 0 |
| ex3824909993 | 93 | Prepared resin, based on diallyl 2,2'-oxydiethyl dicarbonate and oligomers thereof, containing by weight 42 % or more but not more than 52 % of diallyl 2,2'-oxydiethyl dicarbonate and 33 % or more but not more than 43 % of a copolymer of terephthalic acid, propane-1,2-diol and allyl alcohol | 0 |
| ex3824909994 | 94 | Prepared resin, based on diallyl 2,2'-oxydiethyl dicarbonate and oligomers thereof, containing by weight 73 % or more of diallyl 2,2'-oxydiethyl dicarbonate | 0 |
| ex3824909995 | 95 | Mixture of phytosterols, in the form of flakes, containing by weight 80 % or more of sterols and not more than 4 % of stanols | 0 |
| ex38256900 | 10 | Spent catalyst, in the form of rodlets of diameter of 1 mm or more but not exceeding 3 mm, containing a mixture of sulfides of tungsten and of nickel on a support of zeolite, containing by weight not more than 10 % of tungsten and not more than 10 % of nickel, for regeneration as a catalyst for hydrocarbon cracking | 0 |
| ex39011010 | 10 | Linear polyethylene, of a specific gravity of 0,928 or more but not exceeding 0,935 and of a melt flow index of less than 0,6 g/min, for the manufacture of shrinkmelt binder fibres | 0 |
| ex39011090 | 10 | Polyethylene for the manufacture of photo-resist film for semiconductors or printed circuits | 0 |
| ex39011090 | 20 | Polyethylene, in the form of granules, of a specific gravity of 0,925 (± 0,0015), a melt flow index of 0,3 g/10 min (± 0,05 g/10 min), for the manufacture of blown films of a Haze value not exceeding 6 % and an elongation at break (MD/TD) of 210/340 | 0 |
| ex39012090 | 10 | Polyethylene, in one of the forms mentioned in note 6 (b) to Chapter 39, of a specific gravity of 0,945 or more but not exceeding 0,985, for the manufacture of films for typewriter ribbon or similar ribbon | 0 |
| ex39012090 | 20 | Polyethylene, containing by weight 35 % or more but not more than 45 % of mica | 0 |
| ex3901209030 | 30 | Polyethylene, in one of the forms mentioned in note 6(b) to Chapter 39, of a specific gravity of 0,940 or more but not exceeding 0,943 and a melt flow index of 27 g/10 min (± 5 g/10 min) (MFI 190 °C/2,16 kg as determined by the ISO 1133 method), for the manufacture of bicomponent spunbonded non-wovens | 0 |
| ex39019090 | 81 | Copolymer of ethylene and propylene, modified with maleic anhydride, containing by weight more than 55 % of ethylene and not more than 3 % of maleic anhydride | 0 |
| ex39019090 | 82 | Polyethylene modified with maleic anhydride, containing by weight not more than 4 % of maleic anhydride, for use in the manufacture of fuel tanks for motor vehicles | 0 |
| ex39019090 | 91 | Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid | 4 |
| ex39019090 | 93 | Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticizer in the manufacture of roof sheets | 0 |
| ex39019090 | 94 | Mixtures of A-B block copolymer of polystyrene and ethylene-butylene copolymer and A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35 % of styrene | 0 |
| ex39019090 | 95 | Copolymer of ethylene and butylene, having hydroxyl or acrylate end-groups, containing by weight 40 % or more but not more than 60 % of butylene | 0 |
| ex39029090 | 95 |
| ex39019090 | 96 | Linear A-B block copolymer of polyisoprene, whether or not epoxidized, and either ethylene-butylene copolymer or styrene-ethylene-butylene copolymer, having hydroxyl end-groups | 0 |
| ex39029090 | 96 |
| ex39039090 | 50 |
| ex39019090 | 97 | Chlorinated polyethylene, in the form of powder | 0 |
| ex39021000 | 10 | Polypropylene containing no plasticizer and not more than:- 7 mg/kg of aluminium,
- 2 mg/kg of iron,
- 1 mg/kg of magnesium,
- 8 mg/kg of chloride
| 0 |
| ex39021000 | 20 | Polypropylene, containing no plasticiser,- of a melting point of more than 150 oC (as determined by the ASTM D 3417 method),
- of a heat of fusion of 15 J/g or more but not exceeding 70 J/g,
- of an elongation at break of 1000 % or more (as determined by the ASTM D 638 method),
- of a tensile modulus of 69 MPa or more but not exceeding 379 MPa (as determined by the ASTM D 638 method)
| 0 |
| ex39021000 | 30 | Polypropylene, containing not more than 1 mg/kg of aluminium, 0,05 mg/kg of iron, 1 mg/kg of magnesium and 1 mg/kg of chloride, for use in the manufacture of packaging for disposable contact lenses | 0 |
| ex39022000 | 10 | Polyisobutylene, of an average molecular weight (Mn) of 700 or more but not exceeding 800 | 0 |
| ex39023000 | 91 | A-B Block copolymer of polystyrene and an ethylene-propylene copolymer, containing by weight 40 % or less of styrene, in one of the forms mentioned in note 6 (b) to Chapter 39 | 0 |
| ex39039090 | 25 |
| ex39023000 | 94 | Chlorinated polypropylene, chemically modified with maleic anhydride, containing by weight 23 % or more but not more than 26 % of chlorine and less than 5 % of epoxy resin | 0 |
| ex39029090 | 92 | Polymers of 4-methylpent-1-ene | 0 |
| ex39029090 | 97 | Hydrogenated polyisobutene, in liquid form | 0 |
| ex39031900 | 20 | Polystyrene of a molecular weight (Mn) not exceeding 5000 | 0 |
| ex39039090 | 10 | Copolymer, entirely of styrene with maleic anhydride, or entirely of styrene with maleic anhydride and an acrylic monomer, whether or not containing a styrene-butadiene block copolymer, in one of the forms mentioned in note 6 (b) to Chapter 39, for the manufacture of sheetings for head-liners for cars | 0 |
| ex39039090 | 15 | Copolymer, entirely of styrene with maleic anhydride, or entirely of styrene with maleic anhydride and an acrylic monomer, also partially esterified, of an average molecular weight (Mn) not exceeding 3000, in one of the forms mentioned in note 6 (a) and (b) to Chapter 39 | 0 |
| ex39039090 | 20 | Copolymer of styrene with 2-ethylhexyl acrylate or with n-butyl acrylate, containing:- 10 mole % or more but not more than 16 mole % of acrylate,
- 0,2 mg/kg or less of sodiumand
- 0,1 mg/kg or less of calcium
| 0 |
| ex39039090 | 35 | Copolymer of α-methylstyrene and styrene, having a softening point exceeding 113 oC | 0 |
| ex39119099 | 30 |
| ex39039090 | 40 | Copolymer of styrene with α-methylstyrene and acrylic acid, of a molecular weight (Mn) of 500 or more but not exceeding 6000 | 0 |
| ex39069090 | 40 |
| ex39119099 | 50 |
| ex39039090 | 55 | Copolymer of styrene, methyl methacrylate, butyl acrylate and either acrylic acid or hydroxyethyl methacrylate, of a molecular weight (Mn) of 500 or more but not exceeding 6000 | 0 |
| ex39069090 | 45 |
| ex39039090 | 65 | Copolymer of styrene, butyl acrylate, butyl methacrylate, methyl methacrylate and acrylic acid, in the form of powder, containing by weight (81 ± 1) % of styrene, (6 ± 1) % of butyl acrylate, (5 ± 1) % of butyl methacrylate, (7 ± 1) % of methyl methacrylate and (1 ± 0,5) % of acrylic acid | 0 |
| ex39039090 | 70 | Ammonium polystyrenesulfonate, in the form of an aqueous solution | 0 |
| ex39039090 | 75 | Copolymer of styrene and vinyl pyrrolidone, containing by weight not more than 1 % of sodium dodecyl sulfate, in the form of an aqueous emulsion, for the manufacture of goods of subheading 33052000 or of hair dyes of subheading 33059090 | 0 |
| ex39042200 | 91 | Poly(vinyl chloride), dyed in the mass, in the form of flakes, grains, pebbles or rectangular chips, for use as decorative elements in floor and wall coverings | 0 |
| ex39269099 | 80 |
| ex39043000 | 10 | Copolymer of vinyl chloride with vinyl acetate and maleic acid, containing by weight:- 81,5 % or more but not more than 84,5 % of vinyl chloride,
- 13,8 % or more but not more than 16,2 % of vinyl acetateand
- 0,8 % or more but not more than 1,2 % of maleic acid,
for the manufacture of goods of heading No 3215 or for use in the manufacture of coatings for containers and closures of a kind used for preserving food and drink | 0 |
| ex39043000 | 20 | Copolymer of vinyl chloride, vinyl acetate and maleic acid, for use in the manufacture of poly(vinyl chloride)-metal heat-sealing adhesive | 0 |
| ex39044000 | 91 | Copolymer of vinyl chloride with vinyl acetate and vinyl alcohol, containing by weight:- 87 % or more but not more than 92 % of vinyl chloride,
- 2 % or more but not more than 9 % of vinyl acetateand
- 1 % or more but not more than 8 % of vinyl alcohol,
in one of the forms mentioned in note 6 (a) or (b) to Chapter 39, for the manufacture of goods of heading No 3215 or 8523 or for use in the manufacture of coatings for containers and closures of a kind used for preserving food and drink | 0 |
| ex39044000 | 92 | Copolymer of vinyl chloride, vinyl acetate, hydroxypropyl acrylate and maleic acid, containing by weight 80 % or more but not more than 83 % of vinyl chloride, 1,6 % or more but not more than 2 % of hydroxy groups and 0,25 % or more but not more than 0,38 % of carboxyl groups | 0 |
| ex39044000 | 93 | Copolymer of vinyl chloride and methyl acrylate, containing by weight (80 ± 1) % of vinyl chloride and (20 ± 1) % of methyl acrylate, in the form of a aqueous emulsion | 0 |
| ex39045090 | 91 | Copolymer of vinylidene chloride with vinyl chloride, containing by weight 79,5 % or more of vinylidene chloride, in one of the forms mentioned in note 6 (a) or (b) to Chapter 39, for the manufacture of fibres, monofilament or strip | 0 |
| ex39046100 | 10 | Mixture of polytetrafluoroethylene and mica, in one of the forms mentioned in note 6 (b) to Chapter 39 | 0 |
| ex39046100 | 20 | Copolymer of tetrafluoroethylene and trifluoro(heptafluoropropoxy)ethylene, containing 3,2 % or more but not more than 4,6 % by weight of trifluoro(heptafluoropropoxy)ethylene and less than 1 mg/kg of extractable fluoride ions | 0 |
| ex3904610030 | 30 | Polytetrafluoroethylene, in the form of powder, of a specific surface of 8 m2/g or more but not exceeding 12 m2/g, a particle size distribution of 10 % of less than 10 μm and 90 % of less than 35 μm and an average particle size of 20 μm | 0 |
| ex39046990 | 92 | Copolymer of tetrafluoroethylene and trifluoro(trifluoromethoxy)ethylene | 0 |
| ex39046990 | 93 | Copolymer of ethylene with chlorotrifluoroethylene, in one of the forms mentioned in note 6 (b) to Chapter 39 | 0 |
| ex39046990 | 94 | Copolymer of ethylene and tetrafluoroethylene | 0 |
| ex39046990 | 96 | Polychlorotrifluoroethylene, in one of the forms mentioned in note 6 (a) and (b) to Chapter 39 | 0 |
| ex39052900 | 91 | Copolymer of vinyl acetate, dibutyl maleate and acrylic acid, in the form of a solution in isopropyl acetate and toluene | 0 |
| ex39059100 | 91 | Copolymer of N-vinylcaprolactam, N-vinyl-2-pyrrolidone and dimethylaminoethyl methacrylate | 0 |
| ex39059990 | 93 | Poly(vinyl acetate phthalate) | 0 |
| ex39059990 | 94 | Polymer of vinylpyrrolidone and dimethylaminoethyl methacrylate, containing by weight 97 % or more but not more than 99 % of vinylpyrrolidone, in the form of a solution in water | 0 |
| ex39059990 | 95 | Hexadecylated or eicosylated polyvinylpyrrolidone | 0 |
| ex39059990 | 96 | Polymer of vinyl formal, in one of the forms mentioned in note 6 (b) to Chapter 39, of a molecular weight (Mw) of 25000 or more but not exceeding 150000 and containing by weight:- 9,5 % or more but not more than 13 % of acetyl groups evaluated as vinyl acetateand
- 5 % or more but not more than 6,5 % of hydroxy groups evaluated as vinyl alcohol
| 0 |
| ex39059990 | 97 | Povidone (INN)-iodine | 0 |
| ex39059990 | 98 | Poly(vinyl pyrrolidone) partially substituted by triacontyl groups, containing by weight 78 % or more but not more than 82 % of triacontyl groups | 0 |
| ex39061000 | 10 | Poly(methyl methacrylate), in the form of expansible beads containing 2-methylpentane as blowing agent | 0 |
| 39069060 | | Copolymer of methyl acrylate with ethylene and a monomer containing a non-terminal carboxy group as a substituent, containing by weight 50 % or more of methyl acrylate, whether or not mixed with silicon dioxide | 0 |
| ex39069090 | 10 | Polymerization product of acrylic acid with small quantities of a polyunsaturated monomer, for the manufacture of medicaments of heading No 3003 or 3004 | 0 |
| ex39069090 | 20 | Polymerization product of acrylic acid with small quantities of a polyunsaturated monomer, for use as a stabilizer in emulsions or dispersions with a pH of more than 13 | 6 |
| ex39069090 | 30 | Copolymer of styrene with hydroxyethyl methacrylate and 2-ethylhexyl acrylate, of a molecular weight (Mn) of 500 or more but not exceeding 6000 | 0 |
| ex39069090 | 50 | Polymers of esters of acrylic acid with one or more of the following monomers in the chain:- chloromethyl vinyl ether,
- chloroethyl vinyl ether,
- chloromethylstyrene,
- vinyl chloroacetate,
- methacrylic acid,
containing by weight not more than 5 % of each of the monomeric units, in one of the forms mentioned in note 6 (b) to Chapter 39 | 0 |
| ex3906909050 | 50 | Polymers of esters of acrylic acid with one or more of the following monomers in the chain:- chloromethyl vinyl ether,
- chloroethyl vinyl ether,
- chloromethylstyrene,
- vinyl chloroacetate,
- methacrylic acid,
- butenedioic acid monobutyl ester,
containing by weight not more than 5 % of each of the monomeric units, in one of the forms mentioned in note 6(b) to Chapter 39 | 0 |
| ex39069090 | 60 | Copolymer of butyl acrylate and vinyl chloride, containing by weight (58 ± 1) % of butyl acrylate and (42 ± 1) % of vinyl chloride, in the form of a aqueous emulsion | 0 |
| ex39069090 | 70 | Copolymer of ethylene dimethacrylate with either methyl methacrylate or dodecyl methacrylate | 0 |
| ex39069090 | 75 | Copolymer of N-[4,5-dihydro-5-oxo-1-(2,4,6-trichlorophenyl)(1′,4-bi-1H-pyrazol)-3-yl]methacrylamide, butyl acrylate and styrene, in the form of powder | 0 |
| ex39069090 | 80 | Polydimethylsiloxane-graft-(polyacrylates; polymethacrylates) | 0 |
| ex39072011 | 10 | Poly(ethylene oxide) of an average molecular weight (Mn) of 100000 or more | 0 |
| ex39072029 | 10 | Polymer of dextrose, sorbitol and citric or phosphoric acid, containing by weight 90 % or more of dextrose monomer units | 0 |
| ex39072029 | 20 | Poly[oxy-1,4-phenyleneisopropylidene-1,4-phenyleneoxy-(2-hydroxytrimethylene)], of an average molecular weight (Mw) of more than 26000, in one of the forms mentioned in note 6 (b) to Chapter 39 | 0 |
| ex39072099 | 10 | Bis{2-[ω-hydroxy-poly(ethyleneoxy)]ethyl} hydroxymethylphosphonate | 0 |
| ex39072099 | 15 | Poly(oxypropylene) having alkoxysilyl end-groups | 0 |
| ex39072099 | 25 | α-4-Hydroxybutyl-ω-hydroxypoly(oxytetramethylene), containing less than 1 mg/kg of halogen and less than 1 mg/kg of metal, and of a colour not exceeding 20 units on the Hazen scale | 0 |
| ex39072099 | 30 | Homopolymer of 1-chloro-2,3-epoxypropane (epichlorohydrin) | 0 |
| ex39072099 | 35 | Polyethylene glycol chemically modified with an isocyanate group containing a carbodiimide group, in the form of a solution in 2-methoxy-1-methylethyl acetate | 0 |
| ex39072099 | 40 | Polydimethylsiloxane grafted with a poly(ethylene oxide) having C20 and C22 fatty acids ester end-groups | 0 |
| ex3907209945 | 45 | Copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy end-groups | 0 |
| ex3907209950 | 50 | Copolymer of ethylene oxide and propylene oxide, having 2-aminopropyl end-groups | 0 |
| ex39073000 | 20 | Epoxyde resin in the form of powder, containing by weight 44 % or more but not more than 55 % of quartz and 0,5 % or more but not more than 1 % of diantimony trioxide, for the coating of film capacitors | 0 |
| ex39073000 | 30 | Epoxyde resin, without solvent, containing mineral fillers (silica), without glass fibre, of a specific weight at 25 oC of 1,55 g/cm3 or more but not exceeding 1,60 g/cm3 | 0 |
| ex39073000 | 40 | Epoxide resin, containing by weight 70 % or more of silicon dioxide, for the encapsulation of goods of heading No 8533, 8535, 8536, 8541, 8542 or 8548 | 0 |
| ex39169015 | 10 |
| ex39269099 | 70 |
| ex39074000 | 10 | Copolymer of hexane-1,6-diol, cyclohexane-1,4-dimethanol and ethylene carbonate | 0 |
| ex39076080 | 10 | Copolymer of terephthalic acid and isophthalic acid with ethylene glycol, butane-1,4-diol and hexane-1,6-diol | 0 |
| ex39076080 | 20 | Oxygen binding copolymer (as determined by the ASTM D 1434 and 3985 methods), obtained from benzenedicarboxylic acids, ethylene glycol and polybutadiene substituted by hydroxy groups | 0 |
| ex39079190 | 10 | Diallyl phthalate prepolymer, in the form of powder | 0 |
| ex39079919 | 10 | Poly(oxy-1,4-phenylenecarbonyl), in the form of powder | 0 |
| ex39079999 | 10 |
| ex39079919 | 20 | Liquid crystal copolyester with a melting point of not less than 270 oC, whether or not containing fillers | 0 |
| ex39079919 | 30 | Poly(lactic acid) | 0 |
| ex39089000 | 10 | Poly(iminomethylene-1,3-phenylenemethyleneiminoadipoyl), in one of the forms mentioned in note 6 (b) to Chapter 39 | 0 |
| ex39089000 | 20 | Copolymer consisting of hexamethylenediamine, isophthalic acid and terephthalic acid, in one of the forms mentioned in note 6(b) to Chapter 39 | 0 |
| ex39094000 | 10 | Polycondensation product of phenol with formaldehyde, in the form of hollow spheres of a diameter of less than 150 µm | 0 |
| ex39100000 | 10 | 3-[(2-Aminoethyl)amino]propyl(methyl)cyclosiloxane | 0 |
| ex39100000 | 20 | Block copolymer of poly(methyl-3,3,3-trifluoropropylsiloxane) and poly[methyl(vinyl)siloxane] | 0 |
| ex39119019 | 10 | Poly(oxy-1,4-phenylenesulfonyl-1,4-phenyleneoxy-4,4′-biphenylene) | 0 |
| ex39119099 | 20 | Copolymer of dibutyl maleate and N-vinyl-2-pyrrolidone, in one of the forms mentioned in note 6 (a) of Chapter 39 | 0 |
| ex39119099 | 25 | Copolymer of vinyltoluene and α-methylstyrene | 0 |
| ex39119099 | 40 | Mixed calcium and sodium salt of a copolymer of maleic acid and methyl vinyl ether, having a calcium content of 9 % or more but not more than 16 % by weight | 0 |
| ex39119099 | 45 | Copolymer of maleic acid and methyl vinyl ether | 0 |
| ex39119099 | 55 | Solution containing:- (36 ± 0,5) % by weight of polyamide with lateral ester groups,
- (2 ± 0,5) % by weight of acrylic ester,
- (48 ± 0,5) % by weight of 1-methyl-2-pyrrolidone,
- (12 ± 0,5) % by weight of bis(2-methoxyethyl) ether,
- 500 µg/kg or less of potassiumand
- 500 µg/kg or less of iron,
for use in the manufacture of goods of heading No 8542 | 0 |
| ex39119099 | 60 | Hydrocarbon prepolymer, obtained by the reaction of cyclopentadiene and 1,3-pentadiene | 0 |
| ex39119099 | 65 | Calcium zinc salt of a copolymer of maleic acid and methyl vinyl ether | 0 |
| ex3911909975 | 75 | Microspheres of a copolymer of divinylbenzene and styrene, of an average diameter of 325 μm or more but not exceeding 575 μm | 0 |
| ex3926909975 | 75 |
| ex3911909980 | 80 | Poly[(8-methyl-8-methoxycarbonyltricyclo[5.2.1.02,6]decane-3,5-diyl)ethylene] | 0 |
| ex39121100 | 10 | Non-plasticized cellulose triacetate, in the form of flakes, for the manufacture of cellulose triacetate yarn | 0 |
| ex39123910 | 10 | Ethylcellulose, not plasticized | 0 |
| ex39123910 | 20 | Ethylcellulose, in the form of aqueous dispersion containing hexadecan-1-ol and sodium dodecyl sulfate, containing by weight (27 ± 3) % of ethylcellulose | 0 |
| ex39123980 | 10 | Cellulose, both hydroxyethylated and ethylated, insoluble in water | 0 |
| ex39123980 | 20 | Cellulose, both hydroxyethylated and alkylated with alkyl chain-lengths of 3 or more carbon atoms | 0 |
| ex39129010 | 10 | Cellulose acetate propionate, non-plasticised, in the form of powder:- containing by weight 25 % or more of propionyl (as determined by the ASTM D 817-72 method)and
- of a viscosity not exceeding 120 poise (as determined by the ASTM D 817-72 method),
for the manufacture of printing inks, paints, lacquers and other coatings, and reprographic coatings | 0 |
| ex39139000 | 95 | Chondroitinsulfuric acid, sodium salt | 0 |
| ex39139000 | 97 | Chitosonium pyrrolidonecarboxylate | 0 |
| ex39159090 | 10 | Waste, parings and scrap of photographic, cinematographic and radiographic films | 0 |
| ex3916909010 | 10 | Composite profile shape, reinforced with glass fibres, produced by pultrusion, for the manufacture of window frames | 0 |
| ex39173210 | 10 | Flexible pipe of silicone foam, with continuous channels, of a Shore A hardness of 7 or more but not exceeding 48 and a density of 0,28 g/cm3 or more but not exceeding 0,92 g/cm3 | 0 |
| ex39173231 | 91 | Assembly of heat-shrinkable tubing of polyethylene with poly(vinyl acetate), arranged in parallel at equally spaced intervals and attached at one or both ends by perforated plastic strips, in rolls | 0 |
| ex39173299 | 10 |
| ex39269099 | 45 |
| ex39173239 | 20 | Pipe consisting of a block copolymer of polytetrafluoroethylene and polyperfluoroalkoxytrifluoroethylene, of a length of not more than 600 mm, a diameter of not more than 85 mm and a wall-thickness of 30 µm or more but not exceeding 110 µm | 0 |
| ex39191031 | 10 | Reflecting laminated sheet, consisting of a film of polycarbonate totally embossed on one side in a regular shaped pattern, covered on both sides with one or more layers of plastic material and on one side with an adhesive layer and a release sheet | 0 |
| ex39191038 | 30 |
| ex39199031 | 50 |
| ex39191038 | 10 | Self-adhesive tape of metallised polyurethane containing glass beads for use in the manufacture of marine life-saving equipment | 0 |
| ex39191038 | 20 | Reflecting film, consisting of a layer of polyurethane with security imprints and embedded glass beads on one side and an adhesive layer on the other side, covered on one side or on both sides with a release film | 0 |
| ex39199038 | 10 |
| ex39209928 | 20 |
| ex39191061 | 91 | Reflecting film, consisting of a layer of poly(vinyl chloride), a layer of alkyd polyester, with security imprints and embedded glass beads on one side and an adhesive layer on the other side, covered on one side or on both sides with a release film | 0 |
| ex39199061 | 94 |
| ex39191069 | 91 | Black acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic pressure sensitive adhesive and a release sheet, of a peel adhesion at an angle of 90o of more than 25 N/cm (as determined by the ASTM D 3330 method) | 0 |
| ex39199069 | 96 |
| ex39199010 | 10 | Shaped sheet of plastic, with an adhesive layer containing polyisobutylene and pectin, for the manufacture of colostomy bags | 0 |
| ex39199010 | 20 | Poly(ethylene terephthalate) film, covered on one side with an antistatic layer and a hardcoat layer and on the other side with an adhesive layer and a release sheet, in the form of sheets of dimensions not exceeding 500 × 800 mm | 0 |
| ex39199031 | 40 | Reflecting polyester sheeting embossed in a pyramidal pattern, for the manufacture of safety stickers and badges, safety clothing and accessories thereof, or of school satchels, bags or similar containers | 0 |
| ex39206219 | 20 |
| ex39206290 | 20 |
| ex39206300 | 30 |
| ex39206900 | 30 |
| ex39199031 | 60 | Film consisting of 1 to 3 laminated layers of poly(ethylene terephthalate) and a copolymer of terephthalic acid, sebacic acid and ethylene glycol, coated on one side with an acrylic abrasion resistant coating and on the other side with an acrylic pressure sensitive adhesive, a water soluble methylcellulose coating and a poly(ethylene terephthalate) protective liner | 0 |
| ex39199061 | 92 | Poly(vinyl chloride) sheeting, of a thickness of less than 1 mm, coated with an adhesive in which are embedded glass balls of a diameter not exceeding 100 µm | 0 |
| ex39199069 | 92 |
| ex39199061 | 93 | Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 120 µm or more and an adhesive part of acrylic type of a thickness of 10 µm or more, for the protection of the surface of silicon discs | 0 |
| ex39199069 | 93 |
| ex39201089 | 25 |
| ex39199069 | 95 | Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 µm or more but not exceeding 90 µm, whether or not covered on one side with an adhesive layer and a release sheet | 0 |
| ex39205100 | 30 |
| ex39201026 | 20 | Film of polyethylene, of a thickness of 20 µm or more but not exceeding 45 µm, containing calcium carbonate in the mass, for the manufacture of napkins for babies or of sanitary towels or of tampons or of disposable surgical gowns | 0 |
| ex39201026 | 30 | Film of a thickness not exceeding 0,20 mm, of a blend of polyethylene and a copolymer of ethylene with oct-1-ene, embossed in a regular rhomboidal pattern, for coating both sides of a layer of unvulcanized rubber | 0 |
| ex39201089 | 20 |
| ex3920102640 | 40 | Film of polyethylene, of a kind used for typewriter ribbon | 0 |
| ex39201040 | 91 | Synthetic paper pulp, in the form of moist sheets, made from unconnected finely-branched polyethylene fibrils, whether or not blended with cellulose fibres in a quantity not exceeding 15 %, containing poly(vinyl alcohol) dissolved in water as the moistening agent | 0 |
| ex39201040 | 92 | Laminated sheet or strip consisting of a film composed of a blend of a copolymer of ethylene with vinyl acetate and a modified ethylene-propylene-elastomer (EPM) or a modified ethylene-propylene-diene elastomer (EPDM), coated or covered on both sides with a film of a copolymer of ethylene with vinyl acetate | 0 |
| ex39201089 | 35 | Reflecting film, consisting of a layer of polyethylene, a layer of polyurethane, with security imprints and embedded glass beads on one side and a hot-melt adhesive layer on the other side, covered on one side or on both sides with a release film | 0 |
| ex39202029 | 91 | Mono-axial oriented film, consisting of three layers, each layer consisting of a mixture of polypropylene and a copolymer of ethylene and vinyl acetate, having:- a thickness of 55 µm or more but not exceeding 97 µm,
- a tensile modulus in the machine direction of 0,75 GPa or more but not exceeding 1,45 GPaand
- a tensile modulus in the transverse direction of 0,20 GPa or more but not exceeding 0,55 GPa
| 0 |
| ex39202090 | 91 | Synthetic paper pulp, in the form of moist sheets, made from unconnected finely-branched polypropylene fibrils, whether or not blended with cellulose fibres in a quantity not exceeding 15 %, containing poly(vinyl alcohol) dissolved in water as the moistening agent | 0 |
| ex39202090 | 92 | Laminated sheet or strip, consisting of a film of a thickness of 181 µm or more but not exceeding 223 µm composed of a blend of a copolymer of propylene with ethylene and a copolymer of styrene-ethylene-butylene-styrene (SEBS) coated or covered on one side with a layer of a copolymer of styrene-ethylene-butylene-styrene (SEBS) and a layer of polyester | 0 |
| ex39202090 | 93 | Polypropylene sheet, of a thickness of 0,5 mm or more but not exceeding 1,0 mm, having a tensile strength at break of 14,7 MPa or more but not exceeding 21 MPa (as determined by the ASTM D 638 method), in rolls of a width of 3,81 m | 0 |
| ex39203000 | 20 | Laminated sheet or strip, consisting of a film composed of a blend of a thermoplastic elastomer (TPE) of styrene-butadiene-styrene (SBS) with polyethylene or polypropylene, of a thickness of 100 µm or more but not exceeding 200 µm, coated or covered on both sides with a film of polypropylene of a thickness not exceeding 20 µm | 0 |
| ex39204310 | 91 | Reflecting sheeting, consisting solely of a single layer of poly(vinyl chloride), wholly embossed on one side in a regular pyramidal pattern | 0 |
| ex39204910 | 91 |
| ex39204310 | 92 | Sheeting of poly(vinyl chloride), stabilized against ultraviolet rays, without any holes, even microscopic, of a thickness of 60 µm or more but not exceeding 80 µm, containing 30 or more but not more than 40 parts of plasticizer to 100 parts of poly(vinyl chloride) | 0 |
| ex39204310 | 93 | Poly(vinyl chloride) sheet, with relief printing, of a kind used in the templates for textile printing | 0 |
| ex39204310 | 94 | Film of a specular gloss of 70 or more, measured at an angle of 60o using a glossmeter (as determined by the ISO 2813:2000 method), consisting of one or two layers of poly(vinyl chloride) coated on both sides with a layer of plastic, of a thickness of 0,26 mm or more but not exceeding 1,0 mm, covered on the gloss surface with a protective film of polyethylene, in rolls of a width of 1000 mm or more but not exceeding 1450 mm, for use in the manufacture of goods of heading No 9403 | 0 |
| ex39204910 | 93 |
| ex39204310 | 95 | Reflecting laminated sheet, consisting of a film of poly(vinyl chloride) and a film of an other plastic totally embossed in a regular pyramidal pattern, covered on one side with a release sheet | 0 |
| ex39204910 | 92 |
| ex39204310 | 96 | Film of a gloss level of 70 or more, measured at an angle of 60o using a gloss meter (as determined by the ISO 2813:2000 method), consisting of a layer of poly(ethylene terephthalate) and a layer of colored poly(vinyl chloride), for coating panels and doors of a kind used in the manufacture of domestic appliances | 0 |
| ex3920431096 | 96 | Film, of a specular gloss of 70 or more measured at an angle of 60 o using a glossmeter (as determined by the ISO 2813:2000 method), consisting of a layer of poly(ethylene terephthalate) and a layer of colored poly(vinyl chloride), for coating panels and doors of a kind used in the manufacture of domestic appliances | 0 |
| ex39204310 | 97 | Film embossed to a depth of not more than 12 µm, of a specular gloss of 7 or more but not exceeding 17, measured at an angle of 60o using a glossmeter (as determined by the ISO 2813:2000 method), consisting of at least two layers of poly(vinyl chloride), of a total thickness not exceeding 0,5 mm, covered on the embossed side with a protective film, in rolls of a width of 1400 mm or more but not exceeding 1420 mm, for use in the manufacture of goods of heading No 9403 | 0 |
| ex39205100 | 10 | Poly(methyl methacrylate) plate, with an antistatic coating, of dimensions of 738 × 972 mm (± 1,5 mm) | 0 |
| ex39205100 | 20 | Plate of poly(methyl methacrylate) containing aluminium trihydroxide, of a thickness of 3,5 mm or more but not exceeding 19 mm | 0 |
| ex39206100 | 10 | Polycarbonate film of a thickness not exceeding 15 µm, for the manufacture of film capacitors | 0 |
| ex3920621901 | 01 | Coextruded opaque sheet of poly(ethylene terephthalate), of a thickness of 50 μm or more but not exceeding 350 μm, consisting especially of a layer containing carbon black | 0 |
| ex3920621903 | 03 |
| ex3920621904 | 04 | Poly(ethylene terephthalate) film, of a thickness of less than 11 μm, for the manufacture of audiodigital tapes for cassettes | 0 |
| ex3920621906 | 06 |
| ex39206219 | 05 | Coextruded opaque sheet of poly(ethylene terephthalate), of a thickness of 50 µm or more but not exceeding 350 µm, consisting especially of a layer containing carbon black | 0 |
| ex3920621907 | 07 | Poly(ethylene terephtalate) film, not coated with an adhesive, of a thickness not exceeding 25 μm, either:- only dyed in the mass, or
- dyed in the mass and metallized on one side
| 0 |
| ex3920621909 | 09 |
| ex39206219 | 10 | Poly(ethylene terephthalate) film, of a thickness of less than 11 µm, for the manufacture of audiodigital tapes for cassettes | 0 |
| ex3920621911 | 11 | Film of poly(ethylene terephthalate) only, of a total thickness not exceeding 120 μm, consisting of one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material | 0 |
| ex3920621913 | 13 |
| ex3920621914 | 14 | Poly(ethylene terephthalate) film, of a thickness of 20 μm or more but not exceeding 30 μm, coated on one side with silicone, for use in the manufacture of window film | 3 |
| ex3920621916 | 16 |
| ex39206219 | 15 | Poly(ethylene terephtalate) film, not coated with an adhesive, of a thickness not exceeding 25 µm, either:- only dyed in the mass, or
- dyed in the mass and metallized on one side
| 0 |
| ex3920621917 | 17 | Laminated film of poly(ethylene terephthalate) only, of a total thickness not exceeding 120 μm, consisting of one layer which is metallised only and one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material | 0 |
| ex3920621919 | 19 |
| ex3920621921 | 21 | Film of poly(ethylene terephthalate), coated or covered on one side or on both sides with a layer of modified polyester, of a total thickness of 7 μm or more but not exceeding 11 μm, for the manufacture of video tapes with a magnetic layer of metallic pigments and a width of 8 mm or of 12,7 mm | 0 |
| ex3920621923 | 23 |
| ex3920621924 | 24 | Single ply film of poly(ethylene terephthalate) only, of a thickness not exceeding 120 μm, which only:- contains a colouring and/or UV-absorbing material throughout the mass
and- is metallised on one side,
whether or not coated on one or both sides with a vinyl acrylate polymer but having no other coating or adhesive | 0 |
| ex3920621926 | 26 |
| ex39206219 | 25 | Film of poly(ethylene terephthalate) only, of a total thickness not exceeding 120 µm, consisting of one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material | 0 |
| ex3920621927 | 27 | Film of poly(ethylene terephthalate), of a total thickness not exceeding 120 μm, of a width of 100 mm or more but not exceeding 115 mm, coated on both sides with one or more layers containing different chemicals, for the manufacture of goods of subheading 37012000 | 0 |
| ex3920621929 | 29 |
| ex39206219 | 30 | Poly(ethylene terephthalate) film, of a thickness of 20 µm or more but not exceeding 30 µm, coated on one side with silicone, for use in the manufacture of window film | 3 |
| ex3920621931 | 31 | Film of poly(ethylene terephthalate), on one side metallised and coated with white ink and a protective layer and on the other side coated with a thermosensitive seal layer, of a width of 100 mm or more but not exceeding 150 mm, for the manufacture of goods of subheading 37012000 | 0 |
| ex3920621933 | 33 |
| ex3920621934 | 34 | Film of poly(ethylene terephthalate), coated on one side with a layer of modified polyester, of a thickness of 20 μm (± 0,7 μm) or of 30 μm (± 0,9 μm), for the manufacture of audio magnetic tapes of a total thickness of 33 μm or more | 0 |
| ex3920621936 | 36 |
| ex39206219 | 35 | Laminated film of poly(ethylene terephthalate) only, of a total thickness not exceeding 120 µm, consisting of one layer which is metallised only and one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material | 0 |
| ex3920621937 | 37 | Poly(ethylene terephthalate) film, of a thickness not exceeding 12 μm, coated on one side with a layer of aluminium oxide of a thickness not exceeding 35 nm | 0 |
| ex3920621939 | 39 |
| ex39206219 | 40 | Film of poly(ethylene terephthalate), coated or covered on one side or on both sides with a layer of modified polyester, of a total thickness of 7 µm or more but not exceeding 11 µm, for the manufacture of video tapes with a magnetic layer of metallic pigments and a width of 8 mm or of 12,7 mm | 0 |
| ex3920621941 | 41 | Poly(ethylene terephthalate) film, of a thickness of 18 μm or more but not exceeding 25 μm, having:- a shrinkage of (3,4 ± 0,1) % in the machine direction (as determined by the ASTM D 1204 method)
and- a shrinkage of (0,3 ± 0,2) % in the transverse direction (as determined by the ASTM D 1204 method)
| 0 |
| ex3920621943 | 43 |
| ex3920621944 | 44 | Poly(ethylene terephthalate) film, of a thickness not exceeding 19 μm or of a weight of 20 g/m2 or more but not exceeding 26,7 g/m2, for use in the manufacture of photo-resist film | 0 |
| ex3920621946 | 46 |
| ex39206219 | 45 | Single ply film of poly(ethylene terephthalate) only, of a thickness not exceeding 120 µm, which only:- contains a colouring and/or UV-absorbing material throughout the massand
- is metallised on one side,
whether or not coated on one or both sides with a vinyl acrylate polymer but having no other coating or adhesive | 0 |
| ex3920621947 | 47 | Film of poly(ethylene terephthalate), coated on both sides with a layer of epoxy acrylic resin, of a total thickness of 37 μm (± 3 μm) | 0 |
| ex3920621949 | 49 |
| ex39206219 | 50 | Film of poly(ethylene terephthalate), of a total thickness not exceeding 120 µm, of a width of 100 mm or more but not exceeding 115 mm, coated on both sides with one or more layers containing different chemicals, for the manufacture of goods of subheading 37012000 | 0 |
| ex3920621951 | 51 | Film of poly(ethylene terephthalate), coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness not exceeding 300 μm and having a surface resistivity not exceeding 10000 ohms (per square) (as determined by the ASTM D 257-93 method) | 0 |
| ex3920621953 | 53 |
| ex3920621954 | 54 | Matt film of poly(ethylene terephthalate), of a specular gloss of 15 measured at an angle of 45 o and 18 measured at an angle of 60 o using a glossmeter (as determined by the ISO 2813:2000 method) and a width of 1600 mm or more | 0 |
| ex3920621956 | 56 |
| ex39206219 | 55 | Film of poly(ethylene terephthalate), on one side metallised and coated with white ink and a protective layer and on the other side coated with a thermosensitive seal layer, of a width of 100 mm or more but not exceeding 150 mm, for the manufacture of goods of subheading 37012000 | 0 |
| ex3920621957 | 57 | Film of white poly(ethylene terephthalate), dyed in the mass, of a thickness of 185 μm or more but not exceeding 253 μm, coated on both sides with an antistatic layer | 0 |
| ex3920621959 | 59 |
| ex39206219 | 60 | Film of poly(ethylene terephthalate), coated on one side with a layer of modified polyester, of a thickness of 20 µm (± 0,7 µm) or of 30 µm (± 0,9 µm), for the manufacture of audio magnetic tapes of a total thickness of 33 µm or more | 0 |
| ex3920621961 | 61 | Film of a total thickness of 4,5 μm (± 0,16 μm), consisting of a biaxially-oriented poly(ethylene terephthalate) film, of an elastic modulus (in the machine direction) of 12 kg/mm2 (± 2 kg/mm2) and a tensile strength (in the machine direction) of more than 28 kg/mm2, and of an anti-adherent coating | 0 |
| ex3920621963 | 63 |
| ex39206219 | 62 | Poly(ethylene terephthalate) film, of a thickness not exceeding 12 µm, coated on one side with a layer of aluminium oxide of a thickness not exceeding 35 nm | 0 |
| ex39206219 | 64 | Poly(ethylene terephthalate) film, of a thickness of 18 µm or more but not exceeding 25 µm, having:- a shrinkage of (3,4 ± 0,1) % in the machine direction (as determined by the ASTM D 1204 method)and
- a shrinkage of (0,3 ± 0,2) % in the transverse direction (as determined by the ASTM D 1204 method)
| 0 |
| ex39206219 | 65 | Poly(ethylene terephthalate) film, of a thickness not exceeding 19 µm or of a weight of 20 g/m2 or more but not exceeding 26,7 g/m2, for use in the manufacture of photo-resist film | 0 |
| ex3920621967 | 67 | Poly(ethylene terephthalate) film, coated with among other a scratch resistant layer based on polyacrylate and a thermoadhesive layer, of a nominal width of 790 mm and a total thickness of 23 μm or more but not exceeding 26 μm | 0 |
| ex3920621969 | 69 |
| ex39206219 | 70 | Film of poly(ethylene terephthalate), coated on both sides with a layer of epoxy acrylic resin, of a total thickness of 37 µm (± 3 µm) | 0 |
| ex39206219 | 71 | Non-metallised reflecting film, consisting of outside layers of poly(ethylene terephthalate) or poly(ethylene naphthalate) and multiple layers of poly(methyl methacrylate), of a reflectance coefficient of 95 % or more (as determined by the ASTM E 1164-94 and ASTM E 387-95 methods) and a total thickness not exceeding 70 µm | 0 |
| ex39206900 | 70 |
| ex39206219 | 72 | Non-metallised reflecting film, consisting of outside layers of poly(ethylene terephthalate) and multiple layers of poly(methyl methacrylate), of a total thickness of 51 µm (± 10 %), for use in the manufacture of laminated solar-reflecting automotive glass | 0 |
| ex39206219 | 73 | Iridescent film of polyester and poly(methyl methacrylate) | 0 |
| ex39206900 | 40 |
| ex3920621974 | 74 | Multilayer film of a thickness not exceeding 150 μm, consisting of a polyester film coated on one side with polycarbonate resin, metallized on the other side with titanium coated with polycarbonate resin and other layers containing N,N'-diphenyl-N,N'-di-m-tolylbiphenyl-4,4'-ylenediamine | 0 |
| ex3920621976 | 76 |
| ex39206219 | 75 | Film of poly(ethylene terephthalate), coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness not exceeding 300 µm and having a surface resistivity not exceeding 10000 ohms (per square) (as determined by the ASTM D 257-93 method) | 0 |
| ex39206219 | 80 | Matt film of poly(ethylene terephthalate), of a specular gloss of 15 measured at an angle of 45o and 18 measured at an angle of 60o using a glossmeter (as determined by the ISO 2813:2000 method) and a width of 1600 mm or more | 0 |
| ex39206219 | 81 | Film of white poly(ethylene terephthalate), dyed in the mass, of a thickness of 185 µm or more but not exceeding 253 µm, coated on both sides with an antistatic layer | 0 |
| ex39206219 | 85 | Film of a total thickness of 4,5 µm (± 0,16 µm), consisting of a biaxially-oriented poly(ethylene terephthalate) film, of an elastic modulus (in the machine direction) of 12 kg/mm2 (± 2 kg/mm2) and a tensile strength (in the machine direction) of more than 28 kg/mm2, and of an anti-adherent coating | 0 |
| ex39206219 | 87 | Poly(ethylene terephthalate) film, coated with among other a scratch resistant layer based on polyacrylate and a thermoadhesive layer, of a nominal width of 790 mm and a total thickness of 23 µm or more but not exceeding 26 µm | 0 |
| ex39206219 | 88 | Laminated sheet, consisting of a biaxially oriented film of poly(ethylene terephthalate), covered on one side or on both sides with a layer of poly(ethylene terephthalate), for use in the manufacture of identity cards, credit cards and similar products (including "smart" cards) | 0 |
| ex39206219 | 89 | Multilayer film of a thickness not exceeding 150 µm, consisting of a polyester film coated on one side with polycarbonate resin, metallized on the other side with titanium coated with polycarbonate resin and other layers containing N,N′-diphenyl-N,N′-di-m-tolylbiphenyl-4,4′-ylenediamine | 0 |
| ex39206290 | 30 | Film of poly(ethylene terephthalate), of a thickness of 500 µm (± 25 µm) | 0 |
| ex3920629031 | 31 | Film of poly(ethylene terephthalate), of a thickness of 500 μm (± 25 μm) | 0 |
| ex3920629033 | 33 |
| ex39206290 | 40 | Strips of poly(ethylene terephthalate), covered on both sides with a layer of chemically modified polyester, of a width not exceeding 16 mm and a thickness of 0,5 mm or more but not exceeding 2 mm, having a tensile strength at break of 0,7 GPa or more (as determined by the ASTM D 638 method) | 0 |
| ex39206900 | 20 | Film of poly(ethylene naphthalene-2,6-dicarboxylate) | 0 |
| ex39206900 | 50 | Polycondensation product of terephthalic acid with a mixture of cyclohex-1,4-ylenedimethanol and ethane-1,2-diol, in the form of a film | 0 |
| ex39206900 | 60 | Film of a copolymer of ethylene terephthalate and ethylene isophthalate, of a thickness not exceeding 2 µm | 0 |
| ex39209100 | 91 | Poly(vinyl butyral) film having a graduated coloured band | 3 |
| ex39209100 | 92 | Plasticized film of polyvinyl butyral, containing by weight:- either 14,5 % or more but not more than 17,5 % of dihexyl adipate,
- or 14,5 % or more but not more than 28,5 % of dibutyl sebacate
| 0 |
| ex39209100 | 93 | Film of poly(ethylene terephthalate), metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having the following caracteristics:- a visible light transmission of 50 % or more,
- coated on both sides with a layer of poly(vinyl butyral) but not coated with an adhesive or any other material except poly(vinyl butyral),
- a total thickness not exceeding 0,2 mm without taking the presence of poly(vinyl butyral) into account,
for use in the manufacture of heat-reflecting laminated glass | 0 |
| ex39209928 | 10 | Reflecting sheet of metallised polyurethane, containing glass beads, coated with a hot-melt adhesive layer, covered on one or both sides with a release sheet, in rolls of a width of 1020 mm (± 20 mm), for slitting into safety clothing reflecting strip | 0 |
| ex39209928 | 30 | Film of polyimide, not containing epoxyde resin and/or glass fibres:- metallized by sputtering with copper on one side or on both sides,
- metallized by sputtering with copper and plated on one side or on both sides with refined copperor
- covered on one side or on both sides with a copper foil
| 0 |
| ex39219055 | 10 |
| ex74102100 | 30 |
| 39209953 | | Ion-exchange membranes of fluorinated plastic material | 0 |
| ex39209959 | 55 |
| ex39209959 | 20 | Film entirely of poly(vinyl alcohol), of a thickness not exceeding 1 mm and containing by weight:- 2 % or less of unhydrolysed acetate groups evaluated as vinyl acetateand
- 5 % or more but not more than 25 % of glycerol as plasticizer,
for the manufacture of roof-windows | 0 |
| ex39209959 | 25 | Poly(1-chlorotrifluoroethylene) film | 0 |
| ex39209959 | 30 | Film and sheet of a copolymer of ethylene with chlorotrifluoroethylene, of a thickness of 12 µm or more but not exceeding 400 µm | 0 |
| ex39209959 | 35 | Film entirely of poly(vinyl alcohol), of a thickness not exceeding 1 mm and of a width of 2,20 m or more, with an extension at break, in the transverse direction, of 350 % or more | 0 |
| ex39209959 | 40 | Biaxially-oriented film of poly(vinyl alcohol), coated on both sides, of a total thickness of less than 1 mm | 0 |
| ex39209959 | 45 | Iridescent film of polyester, polyethylene and an ethylene-vinyl acetate copolymer | 0 |
| ex39209959 | 50 | Polytetrafluoroethylene film, non-microporous, in the form of rolls, of a thickness of 0,019 mm or more but not exceeding 0,14 mm, impermeable to water vapour | 0 |
| ex39209959 | 60 | Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34 µm or more but not exceeding 90 µm, a tensile strength at break of 32,8 (± 12,1) MPa and an elongation at break of (675 ± 225) % | 0 |
| ex39211400 | 10 | Cellular film of regenerated cellulose, of a thickness not exceeding 350 µm | 0 |
| ex39211900 | 91 | Microporous polypropylene film of a thickness not exceeding 100 µm | 0 |
| ex39211900 | 92 | Microporous film consisting of mixtures of cellulose acetate and cellulose nitrate, of a thickness not exceeding 200 µm | 0 |
| ex39211900 | 93 | Strip of microporous polytetrafluoroethylene on a support of a non-woven, for use in the manufacture of filters for kidney dialysis equipment | 0 |
| ex39211900 | 94 | Polyethylene film, of a thickness of 16 µm or more but not exceeding 24 µm, having:- a weight of 19 g/m2 (± 2 g/m2),
- a water vapour transmission rate of 5000 g/m2 or more but not exceeding 30000 g/m2 per day (as determined by the ASTM D 6701-01 method),
- an elongation in the transverse direction of 25 % or more at a load of 500 g or less,
- an elongation in the machine direction of 50 % or more but not exceeding 100 % (as determined by the ASTM D 882-91 method),
for use in the manufacture of napkins and napkin liners for babies and similar sanitary articles | 0 |
| ex39211900 | 95 | Film of polyethersulfone, of a thickness not exceeding 200 µm | 0 |
| ex39211900 | 96 | Cellular film, consisting of a layer of polyethylene of a thickness of 90 µm or more but not exceeding 140 µm and a layer of regenerated cellulose of a thickness of 10 µm or more but not exceeding 40 µm | 0 |
| ex39219019 | 35 | Composite plate of polycarbonate and poly(butylene terephthalate), reinforced with glass fibres | 0 |
| ex39219019 | 45 | Composite plate of poly(ethylene terephthalate) or of poly(butylene terephthalate), reinforced with glass fibres | 0 |
| ex39219060 | 91 | Woven polytetrafluoroethylene fabric, coated or covered with a copolymer of tetrafluoroethylene and trifluoroethylene having perfluorinated alkoxy side-chains ending in carboxylic acid or sulfonic acid groups, whether or not in the potassium or sodium salt form | 0 |
| ex54077100 | 20 |
| ex59039099 | 10 |
| ex39219060 | 92 | Reinforced polypropylene sheet, of a thickness of 0,91 mm or more but not exceeding 1,12 mm, having a breaking strength of 890 N or more but not exceeding 1500 N (as determined by the ASTM D 751 method), in rolls of a width of 3,81 m | 0 |
| ex39219060 | 93 | Film of a gloss level of 30 or more but not exceeding 60, measured at an angle of 60o using a gloss meter (as determined by the ISO 2813:2000 method), consisting of a layer of poly(ethylene terephthalate) and a layer of colored poly(vinyl chloride), joined by a metalized adhesive coating, for coating panels and doors of a kind used in the manufacture of domestic appliances | 0 |
| ex3921906093 | 93 | Film, of a specular gloss of 30 or more but not exceeding 60 measured at an angle of 60 o using a glossmeter (as determined by the ISO 2813:2000 method), consisting of a layer of poly(ethylene terephthalate) and a layer of colored poly(vinyl chloride), joined by a metalized adhesive coating, for coating panels and doors of a kind used in the manufacture of domestic appliances | 0 |
| ex39231000 | 10 | Boxes of a kind used for the transport and stocking of rigid magnetic discs, fitted with slots to embody 25 rigid magnetic discs of a diameter of less than 100 mm, of exterior dimensions not exceeding 110 × 110 × 200 mm | 0 |
| ex39269091 | 20 | Reflecting sheeting or tape, consisting of a facing-strip of poly(vinyl chloride) embossed in a regular pyramidal pattern, heat-sealed in parallel lines or in a grid-pattern to a backing-strip of plastic material, or of knitted or woven fabric covered on one side with plastic material | 0 |
| ex39269099 | 10 | Microspheres of polymer of divinylbenzene, of a diameter of 4,5 µm or more but not exceeding 80 µm | 0 |
| ex39269099 | 20 | Tape pad, for use in the manufacture of goods of heading No 8523 | 0 |
| ex39269099 | 30 | Guide pin and pole, for use in the manufacture of goods of subheadings 85231100, 85231200 and 85231300 | 0 |
| ex39269099 | 35 | Microspheres of polyalkylsiloxane, on which are covalently bonded organic compounds, of a diameter of 1 µm or more but not exceeding 30 µm | 0 |
| ex39269099 | 55 | Flat product of polyethylene, perforated in opposing directions, of a thickness of 600 µm or more but not exceeding 1200 µm and of a weight of 21 g/m2 or more but not exceeding 42 g/m2 | 0 |
| ex3926909985 | 85 | Unexpansible microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate, of a diameter of 3 μm or more but not exceeding 3,3 μm | 0 |
| ex40070000 | 10 | Siliconated vulcanised rubber thread and cord | 0 |
| ex40081100 | 10 | Blocks or sheets of cellular vulcanised rubber of modified ethylene-propylene-diene (EPDM) blended with chloroprene, which satisfy the Underwriters Laboratories Flammability Standard UL94HF-1 | 0 |
| ex40169988 | 10 | Soft rubber sealing stoppers for the manufacture of electrolytic capacitors | 0 |
| 41051010 | | Sheep or lamb skin leather, without wool on, tanned or retanned but not further prepared, whether or not split, other than leather of heading No 4114 | 0 |
| 41051090 | |
| 41053091 | |
| 41053099 | |
| 41062110 | | Goat or kid skin leather, without hair on, tanned or retanned but not further prepared, whether or not split, other than leather of heading No 4114 | 0 |
| 41062190 | |
| 41062290 | |
| 41063110 | | Leather of other animals, without hair on, not further prepared than tanned, other than leather of No 4114 | 0 |
| 41063190 | |
| 41063210 | |
| 41063290 | |
| 41064090 | |
| 41069100 | |
| 41069200 | |
| ex50040010 | 10 | Yarn spun entirely from silk, not put up for retail sale | 2.5 |
| ex50040090 | 10 |
| ex50050010 | 10 | Yarn spun entirely from silk waste (noil), not put up for retail sale | 0 |
| ex50050090 | 10 |
| 52081110 | | Fabrics for the manufacture of bandages, dressings and medical gauzes | 5.2 |
| ex54024100 | 10 | Polyamide yarn, not textured, untwisted or with a twist not exceeding 22 turns per metre, of crimpable bicomponent filaments consisting of poly(hexamethylene adipamide) with a copolyamide, for the manufacture of:- knee-length stockings of subheadings 61152011 and 61159330,
- women's stockings of subheadings 61152019 and 61159391or
- panty hose (tights) of subheading 61151100
| 0 |
| ex54024100 | 20 | Yarn of synthetic textile fibres solely of aromatic polyamides obtained by the polycondensation of m-phenylenediamine and isophthalic acid | 0 |
| ex54024300 | 20 | Synthetic bicomponent filament yarn, not textured, untwisted, measuring 1650 decitex, consisting of 110 filaments each having a core of poly(ethylene terephthalate) and a skin of polyamide-6, containing by weight 75 % or more but not exceeding 77 % of poly(ethylene terephthalate), for use in the manufacture of roofings | 0 |
| ex54024999 | 10 | Multifilaments yarn of polytetrafluoroethylene | 0 |
| ex54026990 | 20 |
| ex54024999 | 30 | Yarn of a copolymer of glycollic acid with lactic acid, for the manufacture of surgical sutures | 0 |
| ex54024999 | 50 | Non-textured filament yarn of poly(vinyl alcohol) | 0 |
| ex54025990 | 20 |
| ex54026990 | 40 |
| ex54024999 | 60 | Yarn wholly of poly(glycollic acid) | 0 |
| ex54026990 | 10 |
| ex54024999 | 70 | Synthetic filament yarn, single, containing by weight 85 % or more of acrylonitrile, in the form of a wick containing 1000 continuous filaments or more but not more than 25000 continuous filaments, of a weight per metre of 0,12 g or more but not exceeding 3,75 g and of a length of 100 m or more, for the manufacture of carbon-fibre yarn | 0 |
| ex54024999 | 80 | Polyethylene filament yarn, untwisted, of either 55, 110, 165 or 1760 decitex, for the manufacture of goods of heading No 5607 | 0 |
| ex54024999 | 85 | Synthetic filament yarn, single, untwisted, wholly of poly(thio-1,4-phenylene) | 0 |
| ex54041090 | 10 | Monofilament of polytetrafluoroethylene | 0 |
| ex54041090 | 20 | Monofilament of poly(1,4-dioxanone) | 0 |
| ex54041090 | 30 | Monofilament of a copolymer of 1,3-dioxan-2-one with 1,4-dioxan-2,5-dione, for the manufacture of surgical sutures | 0 |
| ex54041090 | 40 | Monofilaments of a stabilised blend of polyester with polyurethane, of 67 decitex or more and of which no cross-sectional dimension exceeds 1 mm | 0 |
| ex54041090 | 50 | Monofilaments of polyester or poly(butylene terephthalate), of 67 decitex or more and of which no cross-sectional dimension exceeds 1 mm | 0 |
| ex54049090 | 20 | Strip of polyimide | 0 |
| ex54077100 | 10 | Woven fabrics of poly(vinyl alcohol) fibres, for machine embroidery | 0 |
| ex55019090 | 10 | Poly(vinyl alcohol) tow | 0 |
| ex55031010 | 10 | Synthetic staple fibres of a copolymer of terephthalic acid, p-phenylenediamine and 3,4′-oxybis(phenyleneamine), of a length not exceeding 7 mm | 0 |
| ex56013000 | 40 |
| ex55039010 | 10 | Acetalized, multicomponent spun fibres with a matrix fibril structure, consisting of emulsion-polymerized poly(vinyl alcohol) and poly(vinyl chloride) | 0 |
| ex55039090 | 30 |
| ex55039090 | 20 | Poly(vinyl alcohol) fibres, whether or not acetalized | 0 |
| ex55069090 | 10 |
| ex56013000 | 10 |
| ex55039090 | 40 | Fibres wholly of poly(thio-1,4-phenylene) | 0 |
| ex56013000 | 20 | Polyester fibres, measuring 0,56 decitex, of a length of 3 mm or more but not exceeding 5 mm | 0 |
| ex56013000 | 30 | Acrylic fibres, measuring 0,11 and 0,56 decitex, of a length of 3 mm or more but not exceeding 5 mm | 0 |
| ex56031110 | 10 | Poly(vinyl alcohol) non-wovens, in the piece or cut into rectangles:- of a thickness of 200 µm or more but not exceeding 280 µmand
- of a weight of 20 g/m2 or more but not exceeding 50 g/m2
| 0 |
| ex56031190 | 10 |
| ex56031210 | 10 |
| ex56031290 | 10 |
| ex56039110 | 10 |
| ex56039190 | 10 |
| ex56039210 | 10 |
| ex56039290 | 10 |
| ex56031110 | 20 | Non-wovens, containing spunbonded fibres of polypropylene or of polypropylene and polyethylene, for the manufacture of napkins and napkin liners for babies and similar sanitary articles | 0 |
| ex56031190 | 20 |
| ex56031210 | 20 |
| ex56031290 | 50 |
| ex56031290 | 30 | Non-wovens of aromatic polyamide fibres obtained by polycondensation of m-phenylenediamine and isophthalic acid, in the piece or cut into rectangles | 0 |
| ex56031390 | 30 |
| ex56031490 | 10 |
| ex56039290 | 60 |
| ex56039390 | 40 |
| ex56039490 | 30 |
| ex56031290 | 60 | Non-woven of spunbonded polyethylene, of a weight of more than 60 g/m2 but not exceeding 80 g/m2 and an air resistance (Gurley) of 8 s or more but not exceeding 36 s (as determined by the ISO 5636/5 method) | 0 |
| ex56031390 | 60 |
| ex56031290 | 70 | Non-wovens of polypropylene, consisting of a meltblown layer, laminated on each side with spunbonded filaments of polypropylene, of a thickness not exceeding 550 µm and of a weight not exceeding 80 g/m2, in the piece or simply cut into squares or rectangles, not impregnated | 0 |
| ex56031390 | 70 |
| ex56039290 | 40 |
| ex56039390 | 10 |
| ex56031390 | 40 | Non-wovens consisting of a central layer of polycarbonate fibres, laminated on each side with spunbonded filaments of polyester, of a weight of more than 130 g/m2 but not exceeding 200 g/m2 | 0 |
| ex56031490 | 20 |
| ex56031390 | 80 | Polyethylene non-woven, covered on both sides with a non-woven of polypropylene and wood pulp, of a weight of 70 g/m2 or more but not exceeding 90 g/m2, in rolls, for use in the manufacture of wet wipes | 0 |
| ex56039390 | 30 |
| ex56039290 | 20 | Non-wovens consisting of a meltblown central layer of a thermoplastic elastomer laminated on each side with spunbonded filaments of polypropylene | 0 |
| ex56039390 | 20 |
| ex56039290 | 50 | Non-wovens of staple fibres, in rolls, of a width of 78 mm or more but not exceeding 252 mm, for the manufacture of floppy discs | 0 |
| ex56039290 | 70 | Non-wovens, consisting of multiple layers of a mixture of meltblown fibres and staple fibres of polypropylene and polyester, whether or not laminated on one side or on both sides with spunbonded filaments of polypropylene, of a total thickness not exceeding 50 mm | 0 |
| ex56039390 | 50 |
| ex56039490 | 40 |
| ex56039490 | 20 | Acrylic fibre rods, having a length of not more than 50 cm, for the manufacture of pen tips | 0 |
| ex56075090 | 10 | Twine, unsterilised, wholly of poly(glycollic acid), plaited or braided, with an inner core, for the manufacture of surgical sutures | 0 |
| ex5803100091 | 91 | Gauze of cotton, of a width of less than 1500 mm | 0 |
| ex59031090 | 10 | Knitted or woven fabrics, coated or covered on one side with artificial plastic material in which are embedded microspheres | 0 |
| ex59032090 | 10 |
| ex59039099 | 20 |
| ex59032090 | 20 | Tape of polyester fabric laminated with a metallised polyurethane film containing glass beads, for use in the manufacture of marine life-saving equipment | 0 |
| ex59069990 | 10 | Rubberised textile fabric, consisting of warp yarns of polyamide-6,6 and weft yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4′-oxybis(phenyleneamine) | 0 |
| ex59070090 | 10 | Textile fabrics, coated with adhesive in which are embedded spheres of a diameter not exceeding 75 µm | 0 |
| ex59111000 | 10 | Needle-punched synthetic-fibre felts, not containing polyester, whether or not containing catalytic particles entrapped within the synthetic fibres, coated or covered on one side with polytetrafluoroethylene film, for the manufacture of filtration products | 0 |
| ex59119090 | 10 | Yarn and strip of impregnated polytetrafluoroethylene, whether or not oiled or graphited | 0 |
| ex59119090 | 30 | Parts of equipment for the purification of water by reverse osmosis, consisting essentially of plastic-based membranes, supported internally by woven or non-woven textile materials which are wound round a perforated tube, and enclosed in a cylindrical plastic casing of a wall-thickness not exceeding 4 mm, whether or not housed in a cylinder of a wall-thickness of 5 mm or more | 0 |
| ex84219900 | 92 |
| 63051010 | | Sacks and bags, of a kind used for the packing of goods, used, of jute or of other textile bast fibres of heading No 5303 | 0 |
| ex63059000 | 10 | Sacks and bags, of a kind used for the packing of goods, used, of flax or of sisal | 0 |
| ex63059000 | 93 |
| ex63059000 | 95 |
| ex63079010 | 10 | Sterile mesh-implant, consisting of a knitted fabric of polypropylene monofilaments, with rounded edges, in forms covered by a square of dimensions not exceeding 31 × 31 cm | 0 |
| ex68139090 | 10 | Friction material, of a thickness of less than 20 mm, not mounted, for the manufacture of friction components of a kind used in automatic transmissions and clutches | 0 |
| ex69032090 | 10 | Yarn of continuous ceramic filaments, each filament containing by weight:- 12 % or more of diboron trioxide,
- 26 % or less of silicon dioxideand
- 60 % or more of dialuminium trioxide
| 0 |
| ex69149090 | 10 |
| ex69039090 | 10 | Beryllium oxide, of a purity by weight of more than 99 %, in the form of blanks, bars, blocks or plates | 0 |
| ex69091900 | 40 |
| ex69039090 | 20 | Silicon carbide reactor tubes and holders, of a kind used for insertion into diffusion and oxidation furnaces for production of semiconductor materials | 0 |
| ex69091200 | 20 | Plate, of dialuminium trioxide and titanium carbide, of dimensions not exceeding 48 × 48 mm, or of a diameter not exceeding 125 mm, for the manufacture of magnetic heads | 0 |
| ex69091900 | 30 | Supports for catalysts, consisting of porous cordierite or mullite ceramic pieces, of an overall volume not exceeding 65 l, having, per cm2 of the cross-section, not less than one continuous channel which may be open at both ends or stopped at one end | 0 |
| ex69091900 | 50 | Ceramic articles made of continuous filaments of ceramic oxides, containing by weight:- 2 % or more of diboron trioxide,
- 28 % or less of silicon dioxideand
- 60 % or more of dialuminium trioxide
| 0 |
| ex69149090 | 20 |
| ex6914909030 | 30 | Ceramic microspheres, transparent, obtained from silicon dioxide and zirconium dioxide, of a diameter of more than 125 μm | 0 |
| ex70060090 | 10 | Glass plate, coated on one side with chromium and/or with a mixture of diindium trioxide and tin dioxide, of dimensions of 260 × 320 mm or more but not exceeding 400 × 400 mm, of a thickness not exceeding 1,2 mm, for the manufacture of liquid crystal displays | 0 |
| ex70060090 | 20 | Colour filter, consisting of a glass plate with red, blue and green pixels, having a total thickness of 1,1 mm (± 0,1 mm) and exterior dimensions of 320 × 352 mm or more but not exceeding 320 × 400 mm, for the manufacture of liquid crystal displays | 0 |
| ex70060090 | 30 | Glass plate, uncoated, of dimensions of 320 × 352 mm or more but not exceeding 320 × 400 mm, of a thickness of 0,6 mm or more but not exceeding 1,2 mm, for the manufacture of liquid crystal displays | 0 |
| ex70060090 | 40 | Disk of glass, with a hole in the centre, with the edges having been worked, of a total thickness not exceeding 1,5 mm | 0 |
| ex70111000 | 10 | Glass lenses with a stippled front refractor or with a front refractor composed of prismatic elements, with an external diameter of more than 121 mm but not exceeding 125 mm | 0 |
| ex70111000 | 20 | Parabolic glass cup, with an external diameter of more than 121 mm but not exceeding 125 mm | 0 |
| ex70119000 | 10 |
| ex70112000 | 25 | Glass cone for cathode-ray tube, of a diagonal measurement of 912 mm (± 5 mm) and a distance from seal edge to the end of the neck of 454,3 mm (± 5 mm) | 0 |
| ex70112000 | 40 | Glass face-plate:- with a diagonal measurement of 366,4 mm (± 1,5 mm) and of dimensions of 246,4 × 315,4 mm (± 1,5 mm),
- with a diagonal measurement of 391 mm (± 1,5 mm) and of dimensions of 261,4 × 326,8 mm (± 1,5 mm),
- with a diagonal measurement of 442 mm (± 1,5 mm) and of dimensions of 293,4 × 369,2 mm (± 1,5 mm),
- with a diagonal measurement of 544,5 mm (± 1,6 mm) and of dimensions of 358 × 454 mm (± 1,6 mm), having a cylindrical curvature,
- with a diagonal measurement of 570,5 mm (± 1,6 mm) and of dimensions of 360 × 486 mm (± 1,6 mm),
- with a diagonal measurement of 629,8 mm (± 3 mm) and of dimensions of 406,5 × 519 mm (± 2 mm), having a cylindrical curvature,or
- with a diagonal measurement of 753 mm (± 1,6 mm) and of dimensions of 471 × 640 mm (± 1,6 mm),
and with a raised edge, for the manufacture of colour cathode-ray tubes | 0 |
| ex70112000 | 75 | Glass face-plate:- with a diagonal measurement of 604,5 mm (± 3 mm) and of dimensions of 340 × 541 mm (± 2 mm),
- with a diagonal measurement of 639,3 mm (± 3 mm) and of dimensions of 413,6 × 527 mm (± 2 mm),
- with a diagonal measurement of 708 mm (± 3 mm) and of dimensions of 404 × 633 mm (± 2 mm),
- with a diagonal measurement of 723 mm (± 3 mm) and of dimensions of 477 × 602 mm (± 2 mm),or
- with a diagonal measurement of 812,8 mm (± 3 mm) and of dimensions of 463,8 × 725,5 mm (± 2 mm),
having a cylindrical curvature, for the manufacture of colour cathode-ray tubes | 0 |
| ex70112000 | 80 | Glass bulb for monochrome cathode-ray tube, of a diagonal measurement of 3,8 cm or more but not exceeding 51 cm and a nominal neck diameter of 13 mm, 20 mm, 29 mm or 37 mm | 0 |
| ex70140000 | 10 | Optical elements of glass (other than those of heading No 7015), not optically worked, other than signalling glassware | 0 |
| ex70191200 | 10 | Rovings, measuring 2600 tex or more but not more than 3300 tex and of a loss on ignition of 4 % or more but not exceeding 8 % by weight (as determined by the ASTM D 2584-94 method) | 0 |
| ex70191200 | 15 | Rovings, measuring 650 tex or more but not more than 2500 tex, coated with a layer of polyurethane whether or not mixed with other materials | 0 |
| ex70191200 | 30 | Rovings, measuring 1693 tex (± 10%), coated with a layer of styrene-butadiene rubber (SBR) | 0 |
| ex70191200 | 40 | Rovings, measuring 2040 tex (± 10 %), coated with carbon | 0 |
| ex70191200 | 50 | Rovings, measuring 392 tex or more but not more than 2884 tex, coated with a layer of an acrylic copolymer | 0 |
| ex70191200 | 60 | Rovings, measuring 517 tex or more but not more than 3569 tex, coated with a layer of paraffin | 0 |
| ex70191200 | 70 | Rovings, measuring 417 tex or more but not more than 3180 tex, coated with a layer of poly(sodium acrylate) and poly(acrylic acid) | 0 |
| ex70191910 | 10 | Yarn of 33 tex or a multiple thereof (± 7,5 %), obtained from continuous spun-glass filaments of a nominal diameter of 3,5 µm or of 4,5 µm, in which filaments of a diameter of 3 µm or more but not exceeding 5,2 µm predominate, other than those treated so as to improve their adhesion to elastomers | 0 |
| ex70191910 | 30 | Yarn of 22 tex (± 7,5 %), obtained from continuous spun-glass filaments of a nominal diameter of 5 µm, in which filaments of a diameter of 4,2 µm or more but not exceeding 5,8 µm predominate | 0 |
| ex70191910 | 40 | Yarn of 33, 34 or 51 tex or a multiple thereof (± 7,5 %), obtained from continuous spun-glass filaments of a nominal diameter of 6 µm, in which filaments of a diameter of 5,1 µm or more but not exceeding 6,9 µm predominate | 0 |
| ex70191910 | 50 | Yarn of E-glass of 68 or 74 tex (± 7 %), obtained from continuous spun-glass filaments of a nominal diameter of 9 µm, in which filaments of a diameter of 8,1 µm or more but not exceeding 9,9 µm predominate, for the manufacture of woven fabrics for electrical laminates (prepregs) | 0 |
| ex70193200 | 10 | Non-woven product of non-textile glass fibre, for the manufacture of air-filters or of air-filtration products | 0 |
| ex70193900 | 10 |
| ex70193900 | 30 | Sheet, consisting of a layer of glass fibres and polypropylene, containing by weight 40 % or more but not more than 60 % of glass fibres of a length of 12,7 mm (± 0,2 mm) and a diameter of 16 µm (± 1 µm), covered on one side with a plastic film and on the other side with a plastic layer, of a total thickness not exceeding 1 mm | 0 |
| ex70199010 | 10 | Non-textile glass fibres in which fibres of a diameter of less than 3,5 µm predominate | 0 |
| ex70199010 | 20 | Non-textile E-glass fibres, of a length not exceeding 3 mm and a diameter of 5 µm, for the manufacture of catalysts for the purification of smokes | 0 |
| ex70199099 | 10 | Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde resin and chlorosulfonated polyethylene | 0 |
| ex7019909920 | 20 | Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde-vinylpyridine resin and an acrylonitrile-butadiene rubber (NBR) | 0 |
| ex71162090 | 10 | Disc of silicon on sapphire | 0 |
| 72025000 | | Ferro-silico-chromium | 0 |
| ex72029980 | 10 | Ferro-silicon, nitrided, containing by weight 55 % or more of silicon and 25 % or more of nitrogen | 0 |
| ex74091900 | 10 | Sheet or plate of polytetrafluoroethylene, with aluminium oxide or titanium dioxide as a filler or reinforced with glass-fibre fabric, laminated on both sides with copper foil | 0 |
| ex74102100 | 10 | Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with copper foil | 0 |
| ex74199900 | 91 | Disc (target) with deposition material, consisting of molybdenum silicide:- containing 1 mg/kg or less of sodiumand
- mounted on a copper or aluminium support
| 0 |
| ex76169990 | 60 |
| ex74199900 | 92 | Disc (target) with deposition material, of tungsten or an alloy containing by weight 90 % of tungsten and 10 % of titanium:- containing 100 µg/kg or less of sodiumand
- mounted on a copper or aluminium support
| 0 |
| ex76169990 | 70 |
| ex74199900 | 93 | Disc (target) with deposition material, of titanium:- containing 50 µg/kg or less of sodiumand
- mounted on a copper or aluminium support
| 0 |
| ex76169990 | 80 |
| ex76051900 | 10 | Not alloyed aluminium wire, of a diameter of 2 mm or more but not exceeding 6 mm, covered with a layer of copper of a thickness of 0,032 mm or more but not exceeding 0,117 mm | 0 |
| ex7606111020 | 20 | Tape of not alloyed aluminium, with a reflecting film, a transparent polyurethane topcoat, a netting and ceramic anti-skid particles | 0 |
| ex76061191 | 20 | Strip with depth-etching, of band-anodic oxidation treated aluminium of a purity by weight of 99,9 % and a thickness of less than 3 mm, for incorporation in bodies for motor vehicles | 0 |
| ex76061193 | 20 |
| ex76130000 | 20 | Aluminium container, seamless, for compressed natural gas or compressed hydrogen, wholly embedded in an overwrap of epoxy-carbon fibres composite, of a capacity of 172 l (± 10 %) and an unfilled weight not exceeding 64 kg | 0 |
| ex87089998 | 10 |
| ex76169990 | 40 | Discs of aluminium alloy, coated or covered on both sides with a nickel-phosphorus layer, having a total thickness not exceeding 3,02 mm | 0 |
| ex76169990 | 50 | Discs of aluminium alloy, of a thickness not exceeding 0,84 mm, for the manufacture of goods of subheading 85232010 | 0 |
| ex79050000 | 10 | Plate of an alloy of zinc, ground and polished on one surface and coated with an epoxide resin on the other surface, of rectangular or square shape, of a length of 300 mm or more but not exceeding 2000 mm and of a width of 300 mm or more but not exceeding 1000 mm, and containing:- 10 mg/kg or less of iron,
- 10 mg/kg or less of lead,
- 700 mg/kg or more but not more than 900 mg/kg of aluminiumand
- 500 mg/kg or more but not more than 900 mg/kg of magnesium,
for the manufacture of sensitised printing plates | 0 |
| ex81039090 | 10 | Welded tube solely of tantalum, or solely of an alloy of tantalum with tungsten containing by weight 3,5 % or less of tungsten | 0 |
| 81041100 | | Unwrought magnesium, containing at least 99,8 % by weight of magnesium | 0 |
| ex81049000 | 10 | Ground and polished magnesium sheets, of dimensions not exceeding 1500 × 2000 mm, coated on one side with an epoxy resin insensitive to light | 0 |
| ex81049000 | 20 | Sections, of extruded magnesium, of a length of 800 mm or more but not exceeding 2900 mm and a width of 15 mm or more but not exceeding 70 mm | 0 |
| ex81082000 | 10 | Titanium sponge | 0 |
| 81083000 | | Waste and scrap of titanium | 0 |
| ex81089070 | 20 | Welded titanium tubes, of an external diameter of 19,0 (± 0,1) mm, having an external structure of 36 fins per 2,54 cm, for use in the manufacture of refrigerant condensers | 0 |
| ex81092000 | 10 | Non-alloy zirconium, in the form of ingots, containing by weight more than 0,01 % of hafnium, for use in the manufacture of tubes for the chemical industry | 0 |
| ex81101000 | 10 | Antimony in the form of ingots | 0 |
| ex81121900 | 10 | Beryllium, of a purity by weight of 94 % or more, in the form of bars, plates and sheets | 0 |
| ex81129930 | 10 | Alloy of niobium (columbium) and titanium, in the form of bars and rods | 0 |
| ex83099090 | 10 | Aluminium can ends with so-called "ring pull" full aperture with a diameter of 136,5 mm (± 1 mm) | 0 |
| ex84073100 | 10 | Two stroke internal combustion engine, of a cylinder capacity not exceeding 30 cm3 for use in the manufacture of portable motorised scooters falling within subheading 87111000 | 0 |
| ex84079010 | 20 | Two-stroke internal combustion engines, having a cylinder capacity not exceeding 125 cm3, for the manufacture of lawnmowers of sub-heading 843311 | 0 |
| ex84089031 | 10 | Diesel engines of a power not exceeding 15 kW, with 2 or 3 cylinders, for use in the manufacture of vehicle mounted temperature control systems | 0 |
| ex84089033 | 10 | Diesel engines of a power not exceeding 30 kW, with 4 cylinders, for use in the manufacture of vehicle mounted temperature control systems | 0 |
| ex84143099 | 10 | Open shaft reciprocating compressor, for use in the manufacture of vehicle mounted temperature control systems | 0 |
| ex84149090 | 10 | Aluminium pistons, partially covered with polytetrafluoroethylene, for incorporation into compressors of air conditioning machines of motor vehicles | 0 |
| ex84149090 | 20 | Pressure-regulating system, for incorporation into compressors of air conditioning machines of motor vehicles | 0 |
| ex84189990 | 91 | Welded cooling micro-elements, of an alloy of aluminium, for the manufacture of condensers | 0 |
| ex84191900 | 10 | Heat accumulator for motor vehicles, of a coolant capacity of 4 l or more but not exceeding 10 l | 0 |
| ex84198998 | 10 | Immersion-tube (coils) bundles, consisting of an assembly of plastic tubes terminating at each end in a honeycomb-structure (end-fitting) surrounded by a pipe-connector | 0 |
| ex84198998 | 20 | Sputtering machines and apparatus, comprising disk handling equipment, for use in the manufacture of products falling within subheading 85232010 | 0 |
| ex85438995 | 58 |
| ex84219900 | 91 | Parts of equipment, for the purification of water by reverse osmosis, consisting of a bundle of hollow fibres of artificial plastic material with permeable walls, embedded in a block of artificial plastic material at one end and passing through a block of artificial plastic material at the other end, whether or not housed in a cylinder | 0 |
| ex84219900 | 93 | Components of separators for the separation or purification of gases from gas mixtures, consisting of a bundle of permeable hollow fibres enclosed within a container, whether or not perforated, of an overall length of 300 mm or more but not exceeding 3700 mm and a diameter not exceeding 500 mm | 0 |
| ex84219900 | 95 | Parts of equipment for the filtration of magnetic dispersions, consisting essentially of nylon-6 fibres, enclosed in a plastic casing of a diameter of 70 mm (± 2 mm) and a length of 520 mm (± 5 mm) | 0 |
| ex84223000 | 10 | Machines and apparatus, other than injection moulding machines, for the manufacture of ink-jet printer cartridges | 0 |
| ex84798998 | 70 |
| ex84248995 | 10 | Machines and apparatus providing automated lapping, polishing, grinding, cleaning or surface lubrication of disks, comprising disk handling equipment, for use in the manufacture of products falling within subheading 85232010 | 0 |
| ex84602190 | 10 |
| ex84604010 | 10 |
| ex84609090 | 10 |
| ex84642019 | 10 |
| ex84798998 | 10 |
| ex84248995 | 20 | Machines and apparatus providing automated cleaning or cleaning and drying of disks, by means of de-ionised water, ultra sonic waves, chemical solutions, heat or a combination of these processes, comprising disk handling equipment, for use in the manufacture of products falling within subheading 85232010 | 0 |
| ex84798998 | 30 |
| ex84399910 | 10 | Suction-roll shells, not drilled, in the form of alloy-steel tubes, of a length of 5207 mm or more and an external diameter of 754 mm or more, for use in machinery for making paper or paperboard | 0 |
| ex84399990 | 10 |
| ex84543010 | 10 | Casting machines for casting under pressure of metal alloys in thixotropic (semi-solid) form | 0 |
| ex84559000 | 10 | Helical turn device for cold-rolling mill | 0 |
| ex84561090 | 10 | Machine-tool operating by laser beam, for the cutting of slots on the surface of a cylindrical tube for use in the manufacture of endo-vascular prosthesis (so-called "stents") | 0 |
| ex84609090 | 20 | Machine-tool providing automated creation of a texture (a head landing zone) on the surface of disks by means of abrasion or exposure to laser beams, comprising disk handling equipment, for use in the manufacture of products falling within subheading 85232010 | 0 |
| ex84639000 | 10 |
| ex84798998 | 20 |
| ex84734019 | 20 | Thermal printer head | 0 |
| ex84778099 | 10 | Machines for casting or for surface modification of plastic membranes of heading No 3921 | 0 |
| ex84798998 | 40 | Motor, whether or not mounted on a baseplate, for use in the manufacture of products falling within subheading 85252091 or 85279092 | 0 |
| ex85011099 | 78 |
| ex84818059 | 10 | Air control valve, consisting of a stepping motor and a valve pintle, for the regulation of idle air flow in fuel injection engines | 0 |
| ex84831080 | 10 | Integrally forged and roughly shaped generator and turbine shafts of a weight exceeding 215 tonnes | 0 |
| ex84834094 | 10 | Gear box, having a differential with wheel axle, for use in the manufacture of self-propelled lawnmowers with a seat of subheading 84331151 | 0 |
| ex84834096 | 10 | Hydrostatic speed changer, having a hydro pump and a differential with wheel axle, for use in the manufacture of self-propelled lawnmowers with a seat of subheading 84331151 | 0 |
| ex84834098 | 10 |
| ex85011099 | 54 | DC motor, brushless, with an external diameter not exceeding 25,4 mm, a rated speed of 2260 (± 15 %) or 5420 (± 15 %) rpm, a supply voltage of 1,5 or 3 V | 0 |
| ex85011099 | 59 | DC stepping motor, with an angle of step of 1,8o (± 0,09o), a holding torque of 0,156 Nm or more, a coupling flange the exterior dimensions of which do not exceed 43 × 43 mm, a chuck of a diameter of 4 mm (± 0,1 mm), a two-phase winding and an output not exceeding 5 W | 0 |
| ex85011099 | 73 | DC motor, whether or not mounted on a baseplate, for use in the manufacture of products falling within subheading 84717053 | 0 |
| ex85011099 | 77 | DC motor, with brushes, with a typical running torque of 0,004 Nm (± 0,001 Nm), with a coupling flange of a diameter of 32 mm (± 0,5 mm) and a chuck of a diameter of 2 mm (± 0,004 mm), with an internal rotor, a three-phase winding, a rated speed of 2800 (± 10 %) rpm and a supply voltage of 12 V (± 15 %) | 0 |
| ex85011099 | 79 | DC motor with brushes and an internal rotor with a three-phase winding, of a specified temperature range covering at least – 20 oC to + 70 oC | 0 |
| ex85024090 | 10 | Rotary converter, with a ferrite core, having coils with 2 or 6 windings and a diameter of 0,1 mm, connected to a flexible printed circuit | 0 |
| ex85030091 | 31 | Rotor, at the innerside provided with one or two magnetic rings whether or not incorporated in a steel ring | 0 |
| ex85030099 | 32 |
| ex85030099 | 31 | Stamped collector of an electric motor, having an external diameter not exceeding 16 mm | 0 |
| ex85044099 | 20 | Direct current to direct current converter | 0 |
| ex85044099 | 30 | Static converter comprising a power switch with insulated-gate bipolar transistors (IGBTs), contained in a housing, for use in the manufacture of microwave ovens of subheading 85165000 | 0 |
| ex85045080 | 30 | Inductor with an inductance not exceeding 62 mH | 0 |
| ex85045080 | 40 | Multilayer monolithic inductors, contained in a housing of the SMD (surface mounted device) type the exterior dimensions of which do not exceed 1,8 × 3,4 mm, for use in the manufacture of products falling within subheading 85171100, 85252091 or 85279092 | 0 |
| ex85049011 | 10 | Ferrite cores, other than for deflection yokes | 0 |
| ex85049018 | 32 | Part of a rotary transformer, comprising a ferrite core provided with circular grooves with copper wire windings | 0 |
| ex85051100 | 31 | Ferrite magnet having a remanence of 455 mT (± 15 mT) | 0 |
| ex85051990 | 31 | Neodymium-ferro ring with an external diameter not exceeding 13 mm, an internal diameter not exceeding 9 mm | 0 |
| ex8505199032 | 32 | Magnet, for use in the manufacture of deflection yokes | 0 |
| ex85059010 | 91 | Solenoid with a plunger, operating at a nominal supply voltage of 24 V at a nominal DC of 0,08 A, for use in the manufacture of products falling within heading No 8517 | 0 |
| ex85059010 | 92 | Electro-mechanical throttle plate actuator for automotive engines | 0 |
| ex85065090 | 10 | Lithium iodine single cell battery the dimensions of which do not exceed 9 × 23 × 45 mm and a voltage not exceeding 2,8 V | 0 |
| ex85065090 | 20 | Unit consisting of not more than 2 lithium batteries embedded in a socket for integrated circuits (battery-buffered socket), with not more than 32 connections and incorporating a control circuit | 0 |
| ex85065090 | 30 | Lithium-iodine or lithium-silver vanadium oxide single cell battery of dimensions not exceeding 28 × 45 × 15 mm and a capacity of not less than 1,05 Ah | 0 |
| ex85073091 | 20 | Rectangular accumulator, with a length not exceeding 69 mm, a width not exceeding 36 mm and a thickness not exceeding 12 mm, for use in the manufacture of rechargeable batteries | 0 |
| ex85078091 | 10 |
| ex85078094 | 20 |
| ex85078098 | 10 |
| ex85073091 | 30 | Cylindrical nickel-cadmium accumulator, with a length of 65,3 mm (± 1,5 mm) and a diameter of 14,5 mm (± 1 mm), having a nominal capacity of 1000 mAh or more, for use in the manufacture of rechargeable batteries | 0 |
| ex85078091 | 80 | Cylindrical nickel-hydride accumulator, of a diameter not exceeding 14,5 mm, for the manufacture of rechargeable batteries | 0 |
| ex85078094 | 10 | Cylindrical lithium-ion accumulator, with a length of 64,6 mm or more and a diameter of 18,1 mm or more, having a nominal capacity of 1200 mAh or more, for use in the manufacture of rechargeable batteries | 0 |
| ex85169000 | 31 | Dual diode, consisting of a power rectifying diode connected with a transformer protector diode through a wire, with a peak reverse power rate of 2 J or more, for use in the manufacture of products falling within subheading 85165000 | 0 |
| ex85182980 | 20 | Loudspeaker having a power of 5 W and an impedance of 4 ohms, with a diameter not exceeding 50 mm, for use in the manufacture of portable phones | 0 |
| ex85183080 | 20 | Headphone and earphone for hearing aids, contained in a housing the exterior dimensions of which, excluding connecting points, do not exceed 5 × 6 × 8 mm | 0 |
| ex85189000 | 91 | Integrally cold-upsetted steel coreplate, in the form of a disk on one side provided with a cylinder, for use in the manufacture of loudspeakers | 0 |
| ex85209090 | 20 | Drive-unit capable of magnetooptical signal recording and optical signal reproducing, comprising at least an optical unit, DC motors and a printed circuit on which are mounted integrated circuits providing drive and signal processing functions for reading optical discs having an external diameter not exceeding 70 mm, not comprising circuits with amplification functions or power supply drive functions | 0 |
| ex85229059 | 93 | Optical unit consisting of a laser diode with one photodiode, emitting light of a nominal wavelength of 780 nm, contained in a housing with a diameter of not more than 10 mm and a height of not more than 9 mm, with not more than 10 connections and bearing:- an identification marking consisting of or including (one of) the following combination(s):
- LDGU
- LT 022
or - other identification markings relating to devices complying with the abovementioned description
| 0 |
| ex85229059 | 94 | Electronic assembly for a laser read-head of a compact disc player, comprising:- a printed circuit,
- a photo-detector, in the form of a monolithic integrated circuit, contained in a housing,
- not more than 3 connectors,
- not more than 1 transistor,
- not more than 3 variable and 4 fixed resistors,
- not more than 5 capacitors,
the whole mounted on a support | 0 |
| ex85229059 | 95 | Printed circuit board mounted with electronic circuits operating at a voltage of 12 V, for use in the manufacture of television sets combined with video or DVD units | 0 |
| ex8522905995 | 95 | Printed circuit board mounted with electronic circuits operating at a voltage of 12 V, for use in the manufacture of television sets combined with video units | 0 |
| ex85229059 | 96 | Assembly, comprising at least a flexible printed circuit, a laser driver integrated circuit and a signal converter integrated circuit | 0 |
| ex85229098 | 31 | Thin-film recording and reproducing device, having at least 9 parallel channels for digital signals and at least 2 channels for analogue signals, to which a non-magnetic ceramic substrate is fixed, the whole rounded at one side, for use in the manufacture of magnetic heads for digital sound recording and digital/analogue sound reproducing apparatus of the cassette-type | 0 |
| ex85229098 | 34 | Cassette-deck sub-assembly for sound recording and reproducing apparatus, for use in the manufacture of telephone answering machines | 0 |
| ex85229098 | 35 | Sound reproducing assembly, comprising a tape deck mechanism of the cassette type, comprising a DC motor, for use in the manufacture of products falling within heading No 8519 | 0 |
| ex85229098 | 36 | Roll for magnetic tape guiding and winding, for use in the manufacture of products falling within heading No 8521 or 8522 | 0 |
| ex85229098 | 37 | Magnetic head for erasing video tapes, for use in the manufacture of products falling within heading No 8521 or 8522 | 0 |
| ex85229098 | 39 | Assembly consisting of a driver circuit, a tacho-sensor and a brushless DC motor | 0 |
| ex85229098 | 43 | Analogue sound recording and reproducing assembly, comprising a record/playback head and a twin tape deck mechanism of the cassette type, not comprising circuits with amplification functions or power supply drive functions, for use in the manufacture of products falling within subheadings 85273191 and 85273198 | 0 |
| ex85229098 | 44 | Assembly for optical discs, comprising at least an optical unit and DC motors, not capable of double layer recording | 0 |
| ex85229098 | 45 | Video tape recording/reproducing assembly comprising at least a motor and a printed circuit board containing integrated circuits with driver or control functions, whether or not incorporating a transformer, for use in the manufacture of products falling within heading No 8521 | 0 |
| ex85229098 | 45 | Laser optical drive unit assembly (so called "mecha units") for the recording and/or reproduction of digital video and/or audio signals, comprising at least a laser optical reading and/or writing unit and a DC motor, whether or not with a printed circuit board for controlling the drive mechanism, for use in the manufacture of products falling within headings No 8519, 8520, 8521, 8526, 8527, 8528 or 8543 | 0 |
| ex85489090 | 45 |
| ex8522909845 | 45 | Video tape recording/reproducing assembly comprising at least a motor and a printed circuit board containing integrated circuits with driver or control functions, whether or not incorporating a transformer, for use in the manufacture of products falling within heading No 8521 | 0 |
| ex85229098 | 46 | Optical reading head for CD player, consisting of one laser diode, one photodetector integrated circuit and one beam splitter | 0 |
| ex8522909847 | 47 | Laser optical drive unit assembly (so called mecha units) for the recording and/or reproduction of digital video and/or audio signals, comprising at least a laser optical reading and/or writing unit, one or more DC motors and not containing a printed circuit board or containing a printed circuit board not capable of signal processing for sounds and images, for use in the manufacture of products falling within headings No 8519, 8520, 8521, 8526, 8527, 8528 or 8543 | 0 |
| ex8548909045 | 45 |
| ex85253090 | 20 | Assembly for television cameras of dimensions not exceeding 10 × 15 × 18 mm, comprising an image sensor, an objective and a color processor, having an image resolution not exceeding 1024 × 1280 pixel, whether or not fitted with cable and/or housing, for the manufacture of goods of subheading 85252091 | 0 |
| ex8525309030 | 30 | Compact chassis-type closed circuit television (CCTV) cameras, of a weight of not more than 250 g, contained in a housing of dimensions not exceeding 50 × 60 × 89,5 mm, with a single sensor Charge-Couple Device (CCD), with effective pixels not exceeding 440000, for use in CCTV surveillance systems | 0 |
| ex85282190 | 20 | Colour video monitor having a DC-operating voltage of 10 V or more but not more than 35 V, comprising a liquid crystal display (LCD) with a diagonal measurement of the screen of 33,2 cm or less, suitable for the incorporation into goods of chapters 84 to 90 | 0 |
| ex8528219020 | 20 | Liquid cristal display colour video monitor having a DC input voltage of 10 V or more but not exceeding 30 V or a fix DC input voltage of 12 V, with a diagonal measurement of the screen of 33,2 cm or less, suitable for the incorporation into goods of chapters 84 to 90 and 94 | 0 |
| ex85282200 | 10 | Video monitor comprising:- a flat screen monochrome cathode-ray tube with a diagonal measurement of the screen not exceeding 110 mm and equipped with a deflector yoke, and
- a printed circuit on which are mounted a deflection unit, a video-amplifier and a transformer,
the whole mounted on a chassis, for the manufacture of video entry-phones, video telephones or surveillance apparatus | 0 |
| ex85291070 | 10 | Ceramic filter package comprising 2 ceramic filters and 1 ceramic resonator for a frequency of 10,7 MHz (± 30 kHz), contained in a housing | 0 |
| ex85291070 | 15 | Ceramic filter for a centre frequency of 10,7 MHz, with a bandwidth not exceeding 330 kHz at 3 dB and not exceeding 950 kHz at 20 dB, contained in a housing | 0 |
| ex85291070 | 20 | Ceramic filters for frequencies of 4,5 MHz or more but not exceeding 6,6 MHz contained in a housing | 0 |
| ex85291070 | 25 | Ceramic filter for a centre frequency of 450 kHz or more but not exceeding 470 kHz, with a bandwidth not exceeding 13 kHz at 3 dB, contained in a housing | 0 |
| ex85291070 | 30 | Ceramic filter for a frequency of 450 kHz, with a bandwidth not exceeding 18 kHz at 10 dB, contained in a housing | 0 |
| ex85291070 | 35 | Ceramic filter for a centre frequency of 455 kHz (± 1,5 kHz), with a bandwidth not exceeding 25 kHz at 6 dB and not exceeding 60 kHz at 40 dB, contained in a housing | 0 |
| ex85291070 | 45 | Ceramic filter for a centre frequency of 450 kHz (± 1,5 kHz) or 455 kHz (± 1,5 kHz), with a bandwidth not exceeding 30 kHz at 6 dB and not exceeding 70 kHz at 40 dB, contained in a housing | 0 |
| ex85291070 | 50 | Radio frequency (RF) signal isolator for frequencies of 890 MHz or more but not exceeding 1990 MHz, having an insertion loss not exceeding 0,7 dB, contained in a housing | 0 |
| ex85291070 | 55 | Filters, excluding surface acoustic wave filters, for a center frequency of 485 MHz or more but not exceeding 1990 MHz with an insertion loss not exceeding 3,5 dB, contained in a housing | 0 |
| ex85291070 | 80 | Ceramic filter package, excluding surface acoustic wave filters, consisting of:- a transmit filter with a centre frequency of 1747,5 MHz and an insertion loss not exceeding 2,3 dB at a bandwidth of 75 MHzand
- a receive filter with a centre frequency of 1842,5 MHz and an insertion loss not exceeding 3,3 dB at a bandwidth of 75 MHz,
the whole contained in a housing | 0 |
| ex85291070 | 85 | Ceramic filter package, excluding surface acoustic wave filters, comprising 2 filters with one of the following combinations of characteristics:- a transmit centre frequency of 902,5 MHz, a receive centre frequency of 947,5 MHz and an insertion loss not exceeding 3,2 dB at a bandwidth of 25 MHzor
- a transmit centre frequency of 1747,5 MHz, a receive centre frequency of 1842,5 MHz and an insertion loss not exceeding 3,5 dB at a bandwidth of 75 MHz,
the whole contained in a housing | 0 |
| ex85291090 | 20 | Antenna switch, comprising:- a transmit filter with a centre frequency of 942,5 MHz or more but not exceeding 1990 MHzand
- a receive filter with a centre frequency of 847,5 MHz or more but not exceeding 1990 MHz,
the whole contained in a housing | 0 |
| ex85299072 | 20 | Parts of TV-apparatus, having micro-processor and video-processor functions, comprising at least a micro-controller and a video-processor, mounted on a leadframe and contained in a plastic housing | 0 |
| ex85489090 | 44 |
| ex85299072 | 30 | Analogue sound recording and reproducing assembly, comprising a record/playback head, a single tape deck mechanism of the cassette type, a spindle electric motor, a rotation direction change mechanism and a chassis | 0 |
| ex85299072 | 40 | Tuner transforming high-frequency signals into mid-frequency signals, for use in the manufacture of television sets | 0 |
| ex85299081 | 31 | Demagnetisation coils, wrapped with tape, with cables and connectors | 0 |
| ex85299081 | 32 | Optical unit for video projection, comprising a colour separation system, a positioning mechanism and lenses, for use in the manufacture of products falling within heading No 8528 | 0 |
| ex85299081 | 34 | Assembly consisting of a lens unit, having an adjustable focal length of 4 mm or more but not exceeding 69 mm and comprising a zoom encoder, a stepping motor unit, a zoom motor unit, an iris motor unit and a photo interrupter | 0 |
| ex85299081 | 35 | Video recording and reproducing assembly, comprising a tape deck mechanism of the cassette type, comprising a DC motor, for use in the manufacture of products falling within heading No 8525 | 0 |
| ex85299081 | 36 | Assembly consisting of a monochrome cathode-ray tube with a diagonal measurement of the screen of 143 mm or more but not exceeding 230 mm and a concave focus lens mounted on a liquid-filled cooling armature | 0 |
| ex85299081 | 37 | Filter, consisting of 2 piezo-electric crystals each with a frequency of 21 MHz or more but not exceeding 30 MHz and seperately mounted on a bracket, with not more than 7 connections | 0 |
| ex85299088 | 33 |
| ex85299081 | 40 | Assembly comprising prisms, digital micromirror device (DMD)-chips and electronic control circuits, for use in the manufacture of video projectors | 0 |
| ex8529908140 | 40 | Assembly comprising prisms, digital micromirror device (DMD) chips and electronic control circuits, for the manufacture of television projection equipments or video projectors | 0 |
| ex85299081 | 41 | Digital micromirror device (DMD)-chips, for use in the manufacture of video projectors | 0 |
| ex85299081 | 42 | Heat sinks and cooling fins of aluminium, for maintaining the operating temperature of transistors and integrated circuits in television sets | 0 |
| ex85299088 | 34 | Video tape recording/reproducing assembly comprising at least a motor and a printed circuit board containing integrated circuits with driver or control functions, mounted on a printed circuit board containing at least integrated circuits for controlling the tape deck mechanism functions, video recording functions and TV-signal processing functions, for use in the manufacture of products falling within heading No 8528 | 0 |
| ex85318080 | 01 | Indicator lamp, consisting of 4 light-emitting diodes made from silicon-cardide (SiC) semiconductor material, operating at a nominal wavelength of 481, 560 or 630 nm, contained in a housing | 0 |
| ex85318080 | 15 | Indicator lamp, consisting of 2 light-emitting diodes made from aluminium-gallium-arsenic (AlGaAs) or gallium-phosphor (GaP) semiconductor material, having a rectangular base, contained in a housing of the SMD (surface mounted device) type and having a lens | 0 |
| ex85318080 | 25 | Electro-accoustic transducer | 0 |
| ex85318080 | 30 | An electromagnetic display, consisting of 7 electromagnetic coils which by means of the residual magnetism in the stators provide that the last indication remains available (set state), and 7 pivoting light-reflecting segments each of which is attached to a bar magnet; assembly comprising such displays | 0 |
| ex85363030 | 11 | Thermo-electric switch with a cut-off current of 50 A or more, comprising a snap action switch, for direct mounting on an electric motor coil, contained in a hermetically sealed housing | 0 |
| ex85363090 | 31 |
| ex85365080 | 96 |
| ex85364110 | 91 | Thermal relays contained in a hermetically sealed glass cartridge not exceeding 35 mm in length excluding wires, with a maximum leakage rate of 10-6 cm3 He/sec at one bar in the temperature range 0 to 160 oC, to be incorporated into compressors for refrigerating equipment | 0 |
| ex85364190 | 91 |
| ex85364900 | 91 |
| ex85365011 | 31 | Switch of the printed circuit mount type, operating at a force of 4,9 N (± 0,9 N), contained in a housing | 0 |
| ex85365011 | 32 | Mechanical tact switch for connecting electronic circuits, operating at a voltage not exceeding 60 V and at a current strength not exceeding 50 mA, for use in the manufacture of television sets | 0 |
| ex85365015 | 32 | Rotary switch in form of a wheel with a diameter of between 15 and 16 mm and contacts for closing the circuit, for a rated voltage of 12 V at 50 mA | 0 |
| ex85365019 | 91 | Hall effect switch, comprising 1 magnet, 1 effect sensor and 2 capacitors, contained in a housing with 3 connections and bearing:- an identification marking consisting of or including (one of) the following combination(s):
- 2AV28E
- 2AV31E
- 2AV56
or - other identification markings relating to devices complying with the abovementioned description
| 0 |
| ex85365019 | 92 | Hydraulic pressure switch, incorporating a pressure sensitive snap action disc, operating at a supply voltage of 6 V or more but not exceeding 18 V | 0 |
| ex85365019 | 93 | Devices, having adjustable controller and switching functions, comprising one ore more monolithic integrated circuits whether or not combined with semiconductor elements, mounted together on a leadframe and contained in a plastic housing | 0 |
| ex85365080 | 97 |
| ex85365080 | 93 | Switch unit for coaxial cable, comprising 3 electromagnetic switches, with a switching time not exceeding 50 ms and an actuating current not exceeding 500 mA at a voltage of 12 V | 0 |
| ex85365080 | 95 | Reed switch having a switching power of 20 W or more within the range of 17-43 A.turn, in the form of a glass capsule, not containing mercury, the dimensions of which do not exceed 3 × 21 mm, for use in the manufacture of automotive airbag shock-sensors | 0 |
| ex85365080 | 98 | Mechanical push-button switch for connecting electronic circuits, operating at a voltage of 220 V or more but not exceeding 250 V and at a current strength not exceeding 5 A, for use in the manufacture of television sets | 0 |
| ex85369085 | 92 | Metallic stamped frame with connections | 0 |
| ex85369085 | 93 | Contact element with a hold-force of more than 3 N, in the form of 2 rectangular plastic frames interconnected by electric conductors | 0 |
| ex85369085 | 94 | Elastomeric connector, of rubber or silicone, consisting of one or more conductor elements | 0 |
| ex85444980 | 10 |
| ex85371099 | 92 | Touch sensitive screen panel, consisting of a conductive grid between two glass or plastic plates or sheets, fitted with electric conductors and connectors | 0 |
| ex85371099 | 93 | Electronic control units for a voltage of 12 V, for use in the manufacture of vehicle mounted temperature control systems | 0 |
| ex85389099 | 92 | Part of an electrothermal fuse, consisting of a tin coated copper wire attached to a cylindrical casing, the exterior dimensions of which do not exceed 5 × 48 mm | 0 |
| ex85401111 | 91 | Colour cathode-ray tube with a slit or slot mask, equipped with electron guns placed side by side (in-line technology) and with a diagonal measurement of the screen of 12 cm or more but not exceeding 26 cm | 0 |
| ex85401111 | 93 | Colour cathode-ray tube, equipped with 1 gun with 3 rays and with a diagonal measurement of the screen of 22 cm or more but not exceeding 26 cm | 0 |
| ex8540111193 | 93 | Colour cathode-ray tube, equipped with one gun with three rays and with a diagonal measurement of the screen of 19 cm or more but not exceeding 26 cm | 0 |
| ex85401113 | 91 | Colour cathode-ray tube with a slit or slot mask, having a distance between stripes of the same colour of less than 0,42 mm and a diagonal measurement of the screen of 49 cm, for use in the manufacture of professional video monitors including security and medical monitor applications | 0 |
| ex85401119 | 91 | Colour cathode-ray tube equipped with electron guns placed side by side (in-line technology), with a diagonal measurement of the screen of 85 cm or more | 0 |
| ex85401191 | 31 | Colour cathode-ray tube with a screen width/height ratio of 16/9 and a diagonal measurement of the screen of 39,8 cm (± 0,3 cm) | 0 |
| ex85401200 | 82 | Monochrome cathode-ray tube with a diagonal measurement of the screen of 250 mm or more but not exceeding 320 mm and an anode voltage of 18 kV or more but not exceeding 22 kV | 0 |
| ex85401200 | 83 | Monochrome cathode-ray tube, with a diagonal measurement of the screen of 150 mm or more but not exceeding 182 mm, a neck diameter of less than 30 mm and an anode voltage of 25 kV or more but not exceeding 32 kV | 0 |
| ex85401200 | 84 | Flat screen monochrome cathode-ray tube, with a diagonal measurement of the screen not exceeding 102 mm | 0 |
| ex85402080 | 91 | Photomultiplier consisting of a photocathode tube with 9 dynodes, for light of a wavelength of 160 nm or more but not exceeding 930 nm, of a diameter not exceeding 14 mm and a height not exceeding 94 mm | 0 |
| ex85404000 | 31 | Colour cathode-ray tube with a dot mask, equipped with 3 electron guns placed side by side (in-line technology) or 1 gun with 3 rays, with a diagonal measurement of the screen of more than 72 cm and a distance of less than 0,5 mm between dots of the same colour | 0 |
| ex85406000 | 31 |
| ex85404000 | 32 | Colour cathode-ray tube with a dot mask, equipped with 3 electron guns placed side by side (in-line technology) or 1 gun with 3 rays, having a diagonal measurement of the screen not exceeding 72 cm | 0 |
| ex85406000 | 32 |
| ex85404000 | 33 | Colour cathode-ray tube with a slit or slot mask, having a distance between stripes of the same colour of less than 0,35 mm and a diagonal measurement of the screen not exceeding 53 cm | 0 |
| ex85404000 | 34 | Colour cathode-ray tube with a slit or slot mask, having a distance between stripes of the same colour of less than 0,39 mm and a diagonal measurement of the screen of 33 cm or more but not exceeding 38 cm | 0 |
| ex85404000 | 35 | Colour cathode-ray tube with a slit or slot mask, having a distance between stripes of the same colour of less than 0,35 mm and a diagonal measurement of the screen not exceeding 72 cm, for use in the manufacture of monitors | 0 |
| ex85404000 | 36 | Colour cathode-ray tube with a slit or slot mask, having a distance between stripes of the same colour of less than 0,30 mm and a diagonal measurement of the screen not exceeding 58 cm | 0 |
| ex85405000 | 31 | Flat screen monochrome cathode-ray tube, with a diagonal measurement of the screen of 142 mm or more but not exceeding 190 mm, a luminescence of 300 lumen or more but not exceeding 2000 lumen, a resolution of 0,06 mm or more but not exceeding 0,1 mm, phosphor types P1 or P22 or P53 or P55 or P56, an anode voltage of more than 34 kV, a focus voltage of more than 7 kV and a cathode current of 3 mA or more | 0 |
| ex85406000 | 33 |
| ex85405000 | 32 | Monochrome cathode-ray tube with a diagonal measurement of the screen of 176 mm or more but not exceeding 520 mm and a neck diameter not exceeding 21 mm | 0 |
| ex85406000 | 34 |
| ex85408900 | 91 | Displays in the form of a tube consisting of a glass housing mounted on a board the dimensions of which do not exceed 300 × 350 mm excluding leads. The tube contains one or more rows of characters or lines arranged in rows, each character or line consisting of fluorescent or phosphorescent elements. These elements are mounted on a metallised base which is covered with fluorescent substances or phosphorescent salts which give off light when bombarded with electrons | 0 |
| ex85408900 | 92 | Vacuum fluorescent display tube | 0 |
| ex85409100 | 31 | Electron gun, for use in the manufacture of colour cathode-ray tubes of subheading 85404000 with a diagonal measurement of the screen of 34 cm or more but not exceeding 39 cm | 0 |
| ex85409100 | 32 | Electron gun of colour cathode-ray tubes with an anode voltage of 27,5 kV or more but not exceeding 33 kV | 0 |
| ex85409100 | 91 | Deflector yoke for cathode-ray tubes with an operating frequency of 31250 Hz or more but not exceeding 64000 Hz, incorporating a quadripolar magnet | 0 |
| ex85409100 | 92 | Slit or slot mask, excluding masks with continuously vertical slits, with a diagonal measurement of 39 cm or less | 0 |
| ex85409100 | 93 | Electron gun for the production of monochrome cathode-ray tubes with a diagonal measurement of the screen of 7,6 cm or more but not exceeding 30,5 cm | 0 |
| ex85409100 | 94 | Deflector yoke for colour cathode-ray tubes, with an operating frequency of 15625 or 31250 Hz, comprising 2 two-pole ring magnets, 2 four-pole ring magnets and 2 six-pole ring magnets | 0 |
| ex85409100 | 96 | Assembly for cathode-ray tubes with 2 or more but not more than 6 coils, a plastic support and a metal fixing ring, for the adjustment of display sharpness and/or convergence | 0 |
| ex85409100 | 97 | Slit mask, consisting of continuously vertical slits measuring more than 275 mm in the length | 0 |
| ex85409100 | 98 | Frame of molybdenum chrome steel, for use in the manufacture of cathode-ray tubes | 0 |
| ex85409900 | 91 | Anode, cathode or output part, or an assembly comprising these components (magnetron core tube), for the manufacture of magnetrons of subheading 85407100 | 0 |
| ex85431900 | 10 | Electron beam accelerator systems, with an operating voltage not exceeding 1,5 MV and a beam current not exceeding 70 mA | |
| ex85438995 | 46 | Amplifier, consisting of active and passive elements mounted on a printed circuit, contained in a housing bearing:- an identification marking consisting of or including (one of) the following combination(s):
- FA 01314
- FA 01317
- FA 01321
- FMC 1717
- FMC 1819
- ISO 122
- MHW 105
- MHW 1815
- MHW 2701
- MHW 2707
- MHW 607
- MHW 704
- MHW 707
- MHW 720
- MHW 803
- MHW 820-1
- MHW 820-2
- MHW 9002
- MHW 910
- MHW 914
- MHW 915
- MHW 916
- MHW 926
- MHW 927
- MHW 953
- PF 0144
- PF 0146
- PF 0148
- PF 0412
- PHW 2905
- PHW 2907
- PHW 5113
- PHW 9012
- PHW 902
- PHW 925
- SHW 5115
- XHW 105
- XHW 2803
- XHW 2902
- XHW 5115
- XHW 903
or - other identification markings relating to devices complying with the abovementioned description
| 0 |
| ex85438995 | 48 | Radio frequency (RF) modulator, operating with a frequency range of 43 MHz or more but not exceeding 870 MHz, capable of switching VHF and UHF signals, consisting of active and passive elements mounted on a printed circuit, contained in a housing | |
| ex85438995 | 49 | Rectifier assembly of power barrier diodes, consisting of 2 diodes with an average forward current not exceeding 600 A and a repetitive reverse peak voltage not exceeding 40 V, each contained in a housing and connected by a common cathode | |
| ex85438995 | 50 | Piezo-electric crystal oscillator with a fixed frequency, within a frequency range of 1,8 MHz to 67 MHz, contained in a housing bearing:- an identification marking consisting of or including (one of) the following combination(s):
- R4000.8
- R4000.9
or - other identification markings relating to devices complying with the abovementioned description
| |
| ex85438995 | 51 | Mechanical vibratory gyroscope driven by a 25 or 26 kHz oscillator, comprising a differential amplifier and a detector circuit, contained in a housing bearing:- an identification marking consisting of or including (one of) the following combination(s):
- ENC05D
or - other identification markings relating to devices complying with the abovementioned description
| 0 |
| ex85438995 | 52 | Opto-electronic circuit comprising one or more light-emitting diodes (LEDs) and one photodiode with amplifier circuit and an integrated logic gate arrays circuit or one or more light-emitting diodes and at least 2 photodiodes with an amplifier circuit, contained in a plastic housing bearing:- an identification marking consisting of or including (one of) the following combination(s):
- HC PL 2400HC PL 2730
or - other identification markings relating to devices complying with the abovementioned description
| |
| ex85438995 | 53 | Oscillator, with a centre frequency of 20 GHz or more but not exceeding 42 GHz, consisting of active and passive elements not mounted on a substrate, contained in a housing bearing:- an identification marking consisting of or including (one of) the following combination(s):
- 372-02372-03
or - other identification markings relating to devices complying with the abovementioned description
| |
| ex85438995 | 55 | Audio recording and reproducing circuit, capable of stereo audio data storage and simultaneous record and playback, comprising 2 or 3 monolithic integrated circuits mounted on a printed circuit or a lead frame, contained in a housing bearing:- an identification marking consisting of or including (one of) the following combination(s):
- RWA010RWA100RWA200RWA300
or - other identification markings relating to devices complying with the abovementioned description
| |
| ex85438995 | 56 | Overvoltage suppression assembly, comprising 8 diodes, having a reverse stand-off voltage not exceeding 4,5 V, a reverse leakage current not exceeding 10 μA, a peak pulse current not exceeding 30 A and a nominal capacitance of 50 pF, contained in a housing | |
| ex85438995 | 59 | Charged coupled device (CCD) scanner assembly, for a real-time film scanning system, having optical functions, illumination functions and signal processing functions | |
| ex85438995 | 60 | Temperature compensated oscillator, comprising a printed circuit on which are mounted at least a piezo-electric crystal and an adjustable capacitor, contained in a housing | |
| ex85438995 | 61 | Voltage controlled oscillator (VCO), other than temperature compensated oscillators, consisting of active and passive elements mounted on a printed circuit, contained in a housing | 0 |
| ex85439080 | 40 | Stainless steel cathode in the form of a plate with a hanger bar, whether or not with plastic side strips | 0 |
| ex85439080 | 50 | Assembly of products falling within heading No 8541 or 8542 mounted on a printed circuit, contained in a housing | 0 |
| ex8544601010 | 10 | Anode cap cable, for use in the manufacture of fly back transformers | 0 |
| ex85459090 | 01 | Cell and battery carbon, in the form of rods, with a length of 34 mm or more but not exceeding 160 mm and a diameter not exceeding 12 mm | 0 |
| ex85471010 | 10 | Insulated fitting of ceramics, containing by weight 90 % or more of aluminium oxide, metallized, in the form of a hollow cylindrical body of an external diameter of 20 mm or more but not exceeding 250 mm, for the manufacture of vacuum interrupters | 0 |
| ex85489090 | 38 | Parts, for use in the manufacture or the repair of products falling within subheading 85172100 | 0 |
| ex85489090 | 39 | Optical unit, consisting of a laserdiode and a photodiode, operating at a typical wavelength of 635 or 670 nm | 0 |
| ex85489090 | 40 | Infrared signal receiver unit, consisting of a photodiode and at least an amplifier in the form of a monolithic integrated circuit, contained in a housing bearing:- an identification marking consisting of or including (one of) the following combination(s):
- GP1U58XB
- SBX 1610
or - other identification markings relating to devices complying with the abovementioned description
| 0 |
| ex85489090 | 41 | Unit, consisting of a resonator operating within a frequency range of 1,8 MHz or more but not exceeding 40 MHz and a capacitor, contained in a housing | 0 |
| ex85489090 | 42 | Clock/calendar circuit, consisting of a printed circuit on which are mounted at least a quartz oscillator and a monolithic integrated circuit, the whole contained in a housing bearing:- an identification marking consisting of or including (one of) the following combination(s):
- DS 1287
- DS 12887A
- DS 1387
- MK 48T02
- MK 48T08
- MK 48T12
- MK 48T18
- RTC 63421
- RTC 65271
- RTC 72423
or - other identification markings relating to devices complying with the abovementioned description
| 0 |
| ex91109000 | 94 |
| ex85489090 | 43 | Contact image sensor | 0 |
| ex8548909046 | 46 | Optical unit, consisting at least of a laser diode and a photodiode, operating at a typical wavelength of 654 nm or more but not exceeding 787 nm | 0 |
| ex87111000 | 10 | Portable motorised scooter, presented unassembled or disassembled | 0 |
| ex90011090 | 10 | Image reverser made up from an assembly of optical fibres | 0 |
| ex90012000 | 10 | Material consisting of a polarising film, supported on one or both sides by transparent material | 0 |
| ex90019090 | 20 | Rear projection screen, comprising a Fresnel lens of plastic and a polarising sheet of plastic, for use in the manufacture of products falling within heading No 8528 | 0 |
| ex90019090 | 30 | Lens of plastic, unmounted, having a focal length of 3,86 mm (± 0,1 mm) and with a diameter not exceeding 8 mm, for use in the manufacture of compact disc players | 0 |
| ex90019090 | 40 | Optical fibre plate, for use in the manufacture of screens and photocathodes for image intensifiers | 0 |
| ex90019090 | 50 | Rear projection screen, comprising a lenticular plastic plate | 0 |
| ex90019090 | 60 | Prism for the splitting of light, unmounted, for use in the manufacture of charged-coupled image (CCD) cameras | 0 |
| ex90019090 | 70 | Rod of neodymium-doped yttrium-aluminium garnet (YAG) material, polished at both ends | 0 |
| ex90019090 | 80 | Lens of plastic, unmounted, for use in the manufacture of products falling within subheading 90064000 | 0 |
| ex90021100 | 10 | Adjustable lens unit, having a focal length of 90 mm or more but not exceeding 180 mm and comprising a combination of between 4 and 8 glass or methacrylic lenses with a diameter of 120 mm or more but not exceeding 180 mm, each lens coated on at least one side with a magnesium fluoride layer, for use in the manufacture of video projectors | 0 |
| ex90021100 | 50 | Lens unit, having a focal length of 25 mm or more but not exceeding 150 mm, consisting of glass or plastic lenses, with a diameter of 60 mm or more but not exceeding 190 mm | 0 |
| ex90021100 | 60 | Optical element, comprising one or more mounted lenses of plastic, for use in the manufacture of products falling within subheading 90064000 | 0 |
| ex90021900 | 10 | Lens unit, having a focal length of 24,96 mm (± 0,1 mm), a diameter of 16 mm and a length of 16 mm, for use in the manufacture of products falling within subheading 85172100 | 0 |
| ex90022000 | 10 | Filter, consisting of a plastic polarising membrane, a glass plate and a transparent protective film, mounted on a metal frame, for use in the manufacture of products falling within heading 8528 | 0 |
| ex90029090 | 20 | Lens, mounted, having a fixed focal length of 3,8 mm (± 0,19 mm) or 8 mm (± 0,4 mm), with a relative aperture of F2.0 and a diameter not exceeding 33 mm, for use in the manufacture of charged-coupled (CCD) cameras | 0 |
| ex90029090 | 30 | Optical unit, comprising 1 or 2 rows of optical glass fibres in the form of lenses and with a diameter of 0,85 mm or more but not exceeding 1,15 mm, embedded between 2 plastic plates | 0 |
| ex90029090 | 50 | Lens and image gate assembly, for a real-time film scanning system, comprising a lens consisting of 9 or 11 elements and having an illumination function | 0 |
| ex90069190 | 10 | Parts, for use in the manufacture of products falling within subheading 90064000 | 0 |
| ex90138090 | 10 | Polarisation insensitive fibre-optic isolator, operating at a wavelength of 1200 nm or more, contained in a cylindrical housing | 0 |
| ex90138090 | 20 | Optical switch, comprising at least one optical input and two optical outputs and with electrical connectors | 0 |
| ex90179090 | 20 | Thermal printer head, comprising at least 7168 heater elements mounted on 2 or more ceramic supports, the whole contained in a housing the exterior dimensions of which exceed 21 × 39 × 639 mm | 0 |
| ex90223000 | 10 | X-ray tube with a target voltage of 4 kV or more but not exceeding 30 kV, a power not exceeding 9 W and a target current not exceeding 2 mA | 0 |
| ex90271090 | 10 | Sensor element for gas or smoke analysis in motor vehicles, essentially consisting of a zirconium-ceramic element in a metal housing | 0 |
| ex90318034 | 10 | Machines and apparatus providing automated quality inspection of rigid magnetic disks, for use in the manufacture of products falling within subheading 85232010 | 0 |
| ex90318039 | 30 |
| ex90318099 | 10 |
| ex90318034 | 30 | Apparatus for measuring the angle and direction of rotation of motor vehicles, consisting of at least one yaw rate sensor in the form of a monocrystalline quartz, whether or not combined with one or more measuring sensors, the whole contained in a housing | 0 |
| ex90318039 | 50 |
| ex90318039 | 10 | Acceleration measurement device for automotive applications, comprising one or more active and/or passive elements and one or more sensors, the whole contained in a housing | 0 |
| ex90318039 | 40 | Machines and apparatus for the automatic testing of the integrity of ink-jet cartridge housings | 0 |
| ex90319080 | 20 | Read and write test head for checking the quality of rigid magnetic disks, mounted on a carrier arm | 0 |
| ex90319080 | 30 | Assembly for a laser align sensor, in the form of a printed circuit comprising optical filters and a charge-coupled image (CCD) sensor, the whole contained in a housing | 0 |
| ex90319080 | 40 | Test head for checking the mechanical quality of rigid magnetic disks, mounted on a carrier arm | 0 |
| ex90319080 | 50 | Burnishing head, for removing asperities on and polishing of the surface of rigid magnetic disks, mounted on a carrier arm | 0 |
| ex90321091 | 10 | Thermostat, comprising a snap-action switch, for direct mounting on an electric motor coil, contained in a hermetically sealed housing | 0 |
| ex90328990 | 10 | Automotive airbag shock-sensor, comprising a contact capable of switching a current of 12 A at a voltage of 30 V, having a typical contact resistance of 80 mohm | 0 |
| ex9032899020 | 20 | Electronic controller of eletric power steering (EPS controller) | 0 |
| ex91069010 | 10 | Timer assembly, for use in the manufacture of goods of subheading 85165000 | 0 |
| ex91101200 | 91 | Assembly consisting of a printed circuit on which are mounted one quartz oscillator, at least one watch circuit and, whether or not integrated, at least one capacitor, of a thickness not exceeding 5 mm | 0 |
| ex91109000 | 92 | Assembly consisting of a printed circuit on which is mounted a watch circuit or a watch circuit and a quartz oscillator, of a thickness not exceeding 5 mm | 0 |
| ex91149000 | 91 |
| ex91109000 | 93 | Assembly consisting of a printed circuit on which is mounted at least one watch circuit, a quartz oscillator and a piezo-electric sound element, with a thickness exceeding 5 mm | 0 |
| ex96089100 | 10 | Non-fibrous plastic pen-tips with an internal channel | 0 |
| ex96089100 | 20 | Felt tips and other porous-tips for markers, without internal canal | 0 |
| ex96121010 | 10 | Ribbons of plastic with segments of different colours, providing the penetration of dyes by heat into a support (so called dye-sublimation) | 0 |
| ex96139000 | 20 | Piezo-electric ignition mechanism, whether or not with complementary elements | 0 |