| Description of goods | Classification CN code | Reason |
|---|
| (1) | (2) | (3) |
|---|
| 1.An ornamental article (luminous fountain or "running tap"), put up unassembled in a packing for retail sale. Assembled, the various plastic components (a base about 15 cm diameter, incorporating a lighting system and an electric motor with a power-supply cable, and equipped with a switch, three basins, various pipe connections, a tap, a small figure of a dancer, artificial flowers and foliage, etc.) form one or other of the articles depicted (height between 30 cm and 40 cm) | 39264000 | Classification is determined by the provisions of General Rules 1 and 6 for the interpretation of the combined nomenclature and by the wording of CN codes 3926 and 39264000 |
| 2.Slippers consisting of a textile upper and an outer sole of plastic (approximately one centimetre thick), the outside of which is entirely covered by a very thin layer of textile material, with poor wearing properties, stuck along the edges | 64041910 | Classification is determined by the provisions of General Rules 1 and 6 for the interpretation of the combined nomenclature, note 4 (b) to Chapter 64 and by the wording of CN codes 6404, 640419 and 64041910 |
3.An automated cartridge system in a casing consisting, essentially, of:- (a)one or more library storage modules (each containing cartridge storage cells and a microprocessor controlled robot and having one or more attached cartridge drive frames and control units); and
- (b)a library management unit with integral software (which acts as the link between the library storage modules and one or more central processing units).
This system is specifically designed for the automatic loading, processing, storage and unloading of magnetic tape cartridges for automatic data processing purposes | 84719910 | Classification is determined by the provisions of General Rules 1 and 6 for the interpretation of the combined nomenclature, by note 5 B to Chapter 84 and by the wording of CN codes 8471, 847199 and 84719910 |
| 4.An adapter card for incorporation in cable linked digital automatic data-processing (ADP) machines enabling the exchange of data over a local area network (LAN) without using a modem.With such a card, an ADP-machine can be used as an input-output device for another machine or a central processing unit.The card constitutes a printed circuit of a size of about 10 x 21 cm incorporating integrated circuits and active and passive components.It is fitted with a row of pin contacts corresponding to an expansion slot in the ADP-machine, with an attachment to the connection cable of the LAN and light emitting diodes (LEDs) | 85178290 | Classification is determined by the provisions of General Rules 1 and 6 for the interpretation of the combined nomenclature, by note 5 to Chapter 84 and by the wording of CN codes 8517, 851782 and 85178290 |
| 5.A miniature electro-acoustic receiver (earphone) in a housing whose exterior dimensions do not exceed 7 x 7x5 mm.The receiver comprises a magnet, a coil and a diaphragm to recieve electrical signals which cause the diaphragm to vibrate thus producing audible sound.The receiver may be used together with an amplifier as a hearing aid | 85183090 | Classification is determined by the provisions of General Rules 1 and 6 for the interpretation of the combined nomenclature, by note 2 (a) to Chapter 90 and by the wording of CN codes 8518, 851830 and 85183090 |
| 6.A laser copier comprising mainly a device for scanning (scanner), a digital image processing device and a printing device (laser printer), contained in a housing.The scanning device uses an optical system, consisting of a lamp, mirrors, lenses and photocells to scan the original image line by line.The copies are produced electrostatically via a drum on the laser printer using the indirect process. The laser copier has several additional features for altering the original image, e.g. reduction, enlargement, shading | 90091200 | Classification is determined by the provisions of General Rules 1 and 6 for the interpretation of the combined nomenclature and by the wording of CN codes 9009 and 90091200 |
| 7.Little star and heart shapes in a variety of colours (red, green and shiny silver) and multicoloured granules, the size of pinheads, made from plastic film, and used to decorate e.g. a table on which food for a carnival celebration, children's party or Advent festivity is served. The decorative effect is achieved by sprinkling the products | 95059000 | Classification is determined by the provisions of General Rules 1 and 6 for the interpretation of the combined nomenclature and by the wording of CN codes 9505 and 95059000 |
 |