*****

COMMISSION REGULATION (EEC) No 288/89

of 3 February 1989

on deterining the origin of integrated circuits

THE COMMISSION OF THE EUROPEAN COMMUNITIES,

Having regard to the Treaty establishing the European Economic Community,

Having regard to Regulation (EEC) No 802/68 of the Council of 27 June 1968 on the common definition of the concept of origin of goods (1), as last amended by Regulation (EEC) No 3860/87 (2), and in particular Article 14 thereof,

Whereas Article 5 of Regulation (EEC) No 802/68 lays down that a product in the production of which two or more countries were concerned shall be regarded as originating in the country in which the last substantial process or operation that is economically justified was performed, having been carried out in an undertaking equipped for the purpose, and resulting in the manufacture of a new product or representing an important stage of manufacture;

Whereas, for integrated circuits, the variety of operations which come within the scope of manufacture makes it necessary to establish the last substantial process or operation for the application of Article 5 of Regulation (EEC) No 802/68;

Whereas the diffusion stage of manufacture is technically highly sophisticated, requires great precision and presupposes a large research investment; whereas, in the context of the totality of the operations necessary for the manufacture of integrated circuits, it is considered that the manufacturing operations following diffusion (such as assembly and testing) are so significantly less important than diffusion that they cannot individually or collectively constitute a substantial operation and thus cannot meet the requirement of being the last substantial operation in the manufacture of integrated circuits; whereas diffusion by means of which the intelligent contribution to the integrated circuit is completed and the integrated circuit is given all its functional capabilities has to be designated for the purposes of Article 5 of Regulation (EEC) No 802/68 as the last substantial operation in the manufacture of integrated circuits; whereas diffusion in this context shall be defined as the process whereby integrated circuits are formed on a semiconductor substrate by the selective introduction of an appropriate dopant;

Whereas the provisions of this Regulation are in accordance with the opinion of the Committee of Origin,

HAS ADOPTED THIS REGULATION:

Article 1

The manufacture of integrated circuits only confers on the said product the origin of the country where it was carried out in the case where the conditions laid down in the Annex to this Regulation are fulfilled.

Article 2

This Regulation shall enter into force three days following its publication in the Official Journal of the European Communities.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 3 February 1989.

For the Commission

Christiane SCRIVENER

Member of the Commission

(1) OJ No L 148, 28. 6. 1968, p. 1.

(2) OJ No L 363, 23. 12. 1987, p. 30.

ANNEX

1.2.3 // // // // CN code // Description of product // Process or operation carried out on non-originating materials that confers that status of originating products // // // // (1) // (2) // (3) // // // // ex 8542 // Integrated circuits // The operation of diffusion (where integrated circuits are formed on a semiconductor substrate by the selective introduction of an appropriate dopant) // // //

Commission Regulation (EEC) No 288/89 of 3 February 1989 on deterining the origin of integrated circuits

Modified by

90/400/EEC: Commission Decision of 3 May 1990 amending Commission Decision 89/288/EEC establishing an initial list of declining industrial areas concerned by Objective 2 as defined by Council Regulation (EEC) No 2052/88