Article 11.This Directive shall apply to toys. A "toy" shall mean any product or material designed or clearly intended for use in play by children of less than 14 years of age.2.The products listed in Annex I shall not be regarded as toys for the purposes of this Directive.

Article 21.Toys may be placed on the market only if they do not jeopardize the safety and/or health of users or third parties when they are used as intended or in a foreseeable way, bearing in mind the normal behaviour of children.2.In the condition in which it is placed on the market, taking account of the period of foreseeable and normal use, a toy must meet the safety and health conditions laid down in this Directive.3.For the purposes of this Directive, the expression "placed on the market" shall cover both sale and distribution free of charge.

Article 3Member States shall take all steps necessary to ensure that toys cannot be placed on the market unless they meet the essential safety requirements set out in Annex II.

Article 4Member States shall not impede the placing on the market on their territory of toys which satisfy the provisions of this Directive.

Article 51.Member States shall presume that toys bearing the CE marking laid down in Article 11 comply with all the provisions of this Directive, including the conformity assessment procedures referred to in Articles 8, 9 and 10.Conformity of toys with the national standards which transpose the harmonized standards the reference numbers of which have been published in the Official Journal of the European Communities shall result in a presumption of conformity to the essential safety requirements referred to in Article 3. Member States shall publish the reference numbers of such national standards.2.Member States shall presume that toys in respect of which the manufacturer has not applied the standards referred to in paragraph 1, or has applied them only in part, or for which no such standards exist, satisfy the essential requirements referred to in Article 3 where, after receipt of an EC type-examination certificate, their conformity with the approved model has been certified by the affixation of the CE marking.3.(a)Where the toys are subject to other Directives covering other aspects and which also provide for the affixing of the CE marking, the latter shall indicate that the toys in question are also presumed to conform to the provisions of those other Directives.(b)However, where one or more of these Directives allow the manufacturer, during a transitional period, to choose which arrangements to apply, the CE marking shall indicate conformity only to the Directives applied by the manufacturer. In this case, particulars of the Directives applied, as published in the Official Journal of the European Communities, must be given in the documents, notices or instructions required by the Directives and accompanying such toys or, failing that, on their packaging.

Article 61.Where a Member State or the Commission considers that the harmonized standards referred to in Article 5 (1) do not entirely satisfy the essential requirements referred to in Article 3, the Commission or the Member State shall refer the matter to the Standing Committee set up under Directive 83/189/EEC, hereinafter referred to as "the committee", setting out its reasons. The committee shall issue an opinion as a matter of urgency.After receiving the committee's opinion, the Commission shall notify the Member States whether or not the standards concerned or a part thereof have to be withdrawn from the publications referred to in Article 5 (1).2.The Commission shall inform the European standardization body concerned and, if necessary, issue a new standardization brief.

Article 71.Where a Member State ascertains that toys bearing the CE marking which are used as intended or in accordance with Article 2 are likely to jeopardize the safety and/or health of consumers and/or third parties, it shall take all appropriate measures to withdraw the products from the market, or to prohibit or restrict their placing on the market. The Member State shall inform the Commission immediately of this measure and indicate the reasons for its decision, stating in particular whether the non-compliance results from:(a)failure to meet the essential requirements referred to in Article 3, if the toy does not meet the standards referred to in Article 5 (1);(b)incorrect application of the standards referred to in Article 5 (1);(c)shortcomings in the standards referred to in Article 5 (1).2.The Commission shall enter into consultation with the parties concerned as soon as possible. Where, after such consultation, the Commission finds that any measure as referred to in paragraph 1 is justified, it shall forthwith so inform the Member State that took the action and the other Member States. Where the decision referred to in paragraph 1 is attributed to shortcomings in the standards, the Commission, after consulting the parties concerned, shall bring the matter before the Committee within two months if the Member State which has taken the measures intends to maintain them and shall initiate the procedures referred to in Article 6.3.Where the toy which does not comply with the requirements bears the CE marking, the competent Member State shall take appropriate measures and inform the Commission, which shall inform the other Member States.

Article 81.(a)Before being placed on the market, toys manufactured in accordance with the harmonized standards referred to in Article 5 (1) must have affixed to them the CE marking by which the manufacturer or his authorized representative established within the Community confirms that the toys comply with those standards;(b)The manufacturer or his authorized representative established within the Community shall keep the following information available for inspection:a description of the means (such as the use of a test report or technical file) whereby the manufacturer ensures conformity of production with the standards referred to in Article 5 (1) and, as appropriate: an EC type-certificate drawn up by an approved body; copies of the documents the manufacturer has submitted to the approved body; a description of the means whereby the manufacturer ensures conformity with the approved model,the addresses of the places of manufacture and storage,detailed information concerning the design and manufacture.Where neither the manufacturer nor his authorized representative are established within the Community, the above obligation to keep a dossier available shall be the responsibility of the person who places the toy on the Community market.2.(a)Toys which do not conform in whole or in part to the standards referred to in Article 5 (1) must have affixed to them, before being placed on the market, the CE marking by which the manufacturer or his authorized representative established within the Community confirms that the toy concerned conforms to the model examined in accordance with the procedures laid down in Article 10 which an approved body has stated complies with the essential requirements referred to in Article 3;(b)the manufacturer or his authorized representive established within the Community shall keep the following information available for inspection:a detailed description of manufacture,a description of the means (such as the use of a test report or technical file) whereby the manufacturer ensures conformity with the approved modelthe addresses of the places of manufacture and storage,copies of the documents the manufacturer has submitted to an approved body in accordance with Article 10 (2),the test certificate for the sample or a certified copy thereof.Where neither the manufacturer nor his authorized representative is established within the Community, the above obligation to keep a dossier available shall be the responsibility of the person who places the toy on the market in the Community.3.In the event of non-observance of the obligations laid down in paragraphs 1 (b) and 2 (b), the competent Member State shall take appropriate measures to ensure that those obligations are observed.Where non-observance of the obligations is obvious, it may in particular require the manufacturer or his authorized representative established within the Community to have a test performed at his own expense within a specified period by an approved body in order to verify compliance with the harmonized standards and essential safety requirements.

Article 91.The minimum criteria which Member States must meet in order to appoint the approved bodies referred to in this Directive are contained in Annex III.2.Member States shall notify the Commission and the other Member States of the bodies which they have appointed to carry out the EC type-examination referred to in Article 8 (2) and Article 10 together with the specific tasks which these bodies have been appointed to carry out and the identification numbers assigned to them beforehand by the Commission.The Commission shall publish in the Official Journal of the European Communities a list of the notified bodies with their identication number and the tasks for which they have been notified. The Commission shall ensure that this list is kept up to date.3.A Member State which has approved a body shall withdraw approval if it finds that the body no longer meets the criteria listed in Annex III. It shall forthwith inform the Commission thereof.

Article 101.EC type-examination is the procedure by which an approved body ascertains and certifies that a model of a toy satisfies the essential requirements referred to in Article 3.2.The application for EC type-examination shall be lodged with an approved body by the manufacturer or by his authorized representative established within the Community.The application shall include:a description of the toy,the name and address of the manufacturer or of his authorized representative or representatives, and the place of manufacture of the toy,comprehensive manufacturing and design data; and shall be accompanied by a model of the toy to be manufactured.3.The approved body shall carry out the EC type-examination in the manner described below:it shall examine the documents supplied by the applicant and establish whether they are in order,it shall check that the toy would not jeopardize safety and/or health, as provided for in Article 2,it shall carry out the appropriate examinations and tests — using as far as possible the harmonized standards referred to in Article 5 (1) — in order to check whether the model meets the essential requirements referred to in Article 3,it may ask for further examples of the model.4.If the model complies with the essential requirements referred to in Article 3, the approved body shall draw up an EC type-examination certificate which shall be notified to the applicant. This certificate shall state the conclusions of the examination, indicate any conditions attaching to it and be accompanied by the descriptions and drawings of the approved toy.The Commission, the other approved bodies and the other Member States may obtain on request a copy of the certificate and, on reasoned request, a copy of the design and manufacturing schedule and the reports on the examinations and tests carried out.5.An approved body which refuses to issue an EC type-examination certificate shall so inform the Member State which approved it and the Commission, giving the reasons for refusal.

Article 111.The CE marking referred to in Articles 5, 7 and 8 and the name and/or trade name and/or mark and address of the manufacturer or his authorized representative or the importer into the Community shall as a rule be affixed either to the toy or on the packaging in a visible, easily legible and indelible form. In the case of small toys and toys consisting of small parts these particulars may be affixed in the same way to the packaging, to a label or to a leaflet. Where the said particulars are not affixed to the toy, the consumer's attention must be drawn to the advisability of keeping them.2.The CE conformity marking shall consist of the initials "CE"taking the form of the specimen given in Annex V.3.The affixing of markings on the toys which are likely to deceive third parties as to the meaning and form of the CE marking shall be prohibited. Any other marking may be affixed to the toys, their packaging or a label provided that the visibility and legibility of the EC marking is not thereby reduced.4.The particulars referred to in paragraph 1 may be abbreviated provided that the abbreviation enables the manufacturer, his authorized representative or the importer into the Community to be identified.5.Annex IV sets out the warnings and indications of precautions to be taken during use that have to be given for certain toys. Member States may require that these warnings and precautions, or some of them, together with the information specified in paragraph 4, be given in their own national language or languages when the toys are placed on the market.

Article 121.Member States shall take the necessary measures to ensure that sample checks are carried out on toys which are on their market, so as to verify their conformity with this Directive.The authority responsible for inspection:shall obtain access, on request, to the place of manufacture or storage and to the information referred to in Article 8 (1) (b) and (2) (b),may ask the manufacturer, his authorized representative or the person responsible for marketing the toy established within the Community to supply the information as provided for in Article 8 (1) (b) and (2) (b) within a period specified by the Member State,may select a sample and take it away for examination and testing.1a.Without prejudice to Article 7:(a)where a Member State establishes that the CE marking has been affixed unduly, the manufacturer or his authorized representative established within the Community shall be obliged to make the product conform as regards the provisions concerning the CE marking and to end the infringement under the conditions imposed by the Member State;(b)where non-conformity continues, the Member State must take all appropriate measures to restrict or prohibit the placing on the market of the product in question or to ensure that it is withdrawn from the market in accordance with the procedures laid down in Article 7.2.Every three years, Member States shall send the Commission a report on the application of this Directive.3.The Member States and the Commission shall take the necessary measures to guarantee confidentiality with regard to the forwarding of the copies relating to the EC type-examination referred to in Article 10 (4).

Article 13Member States shall regularly inform the Commission of the activities carried out in pursuance of this Directive by the bodies they have approved so that the Commission may ensure that the inspection procedures are implemented correctly and without discrimination.

Article 14Any decision taken pursuant to this Directive and involving restrictions on the placing of the toy on the market shall state the exact grounds on which it is based. It shall be notified at the earliest opportunity to the party concerned, who shall at the same time be informed of the remedies available to him under the laws in force in the Member State in question and of the time limits applying to such remedies.

Article 151.Member States shall adopt and publish by 30 June 1989 the provisions necessary to comply with this Directive. They shall forthwith inform the Commission thereof.They shall apply these provisions from 1 January 1990.2.Member States shall communicate to the Commission the texts of the provisions of national law which they adopt in the field covered by this Directive.

Article 16This Directive is addressed to the Member States.

nullANNEX IPRODUCTS NOT REGARDED AS TOYS FOR THE PURPOSE OF THIS DIRECTIVE(Article 1 (1))1.Christmas decorations2.Detailed scale models for adult collectors3.Equipment intended to be used collectively in playgrounds4.Sports equipment5.Aquatic equipment intended to be used in deep water6.Folk dolls and decorative dolls and other similar articles for adult collectors7."Professional" toys installed in public places (shopping centres, stations, etc.)8.Puzzles with more than 500 pieces or without picture, intended for specialists9.Air guns and air pistols10.Fireworks, including percussion capsWith the exception of percussion caps specifically designed for use in toys without prejudice to more stringent provisions already existing in certain Member States.11.Slings and catapults12.Sets of darts with metallic points13.Electric ovens, irons or other functional products operated at a nominal voltage exceeding 24 volts14.Products containing heating elements intended for use under the supervision of an adult in a teaching context15.Vehicles with combustion engines16.Toy steam engines17.Bicycles designed for sport or for travel on the public highway18.Video toys that can be connected to a video screen, operated at a nominal voltage exceeding 24 volts19.Babies' dummies20.Faithful reproductions of real fire arms21.Fashion jewellery for childrenANNEX IIESSENTIAL SAFETY REQUIREMENTS FOR TOYSI.GENERAL PRINCIPLES1.In compliance with the requirements of Article 2 of the Directive, the users of toys as well as third parties must be protected against health hazards and risk of physical injury when toys are used as intended or in a forseeable way, bearing in mind the normal behaviour of children. Such risks are those:(a)which are connected with the design, construction or composition of the toy;(b)which are inherent in the use of the toy and cannot be completely eliminated by modifying the toy's construction and composition without altering its function or depriving it of its essential properties.2.(a)The degree of risk present in the use of a toy must be commensurate with the ability of the users, and where appropriate their supervisors, to cope with it. This applies in particular to toys which, by virtue of their functions, dimensions and characteristics, are intended for use by children of under 36 months.(b)To observe this principle, a minimum age for users of toys and/or the need to ensure that they are used only under adult supervision must be specified where appropriate.3.Labels on toys and/or their packaging and the instructions for use which accompany them must draw the attention of users or their supervisors fully and effectively to the risks involved in using them and to the ways of avoiding such risks.II.PARTICULAR RISKS1.Physical and mechanical properties(a)Toys and their parts and, in the case of fixed toys, their anchorages, must have the requisite mechanical strength and, where appropriate, stability to withstand the stresses to which they are subjected during use without breaking or becoming liable to distortion at the risk of causing physical injury.(b)Accessible edges, protrusions, cords, cables and fastenings on toys must be so designed and constructed that the risks of physical injury from contact with them are reduced as far as possible.(c)Toys must be so designed and constructed as to minimize the risk of physical injury which could be caused by the movement of their parts.(d)Toys, and their component parts, and any detachable parts of toys which are clearly intended for use by children under 36 months must be of such dimensions as to prevent their being swallowed and/or inhaled.(e)Toys, and their parts and the packaging in which they are contained for retail sale must not present risk of strangulation or suffocation.(f)Toys intended for use in shallow water which are capable of carrying or supporting a child on the water must be designed and constructed so as to reduce as far as possible, taking into account the recommended use of the toy, any risk of loss of buoyancy of the toy and loss of support afforded to the child.(g)Toys which it is possible to get inside and which thereby constitute an enclosed space for occupants must have a means of exit which the latter can open easily from the inside.(h)Toys conferring mobility on their users must, as far as possible, incorporate a braking system which is suited to the type of toy and is commensurate with the kinetic energy developed by it. Such a system must be easy for the user to operate without risk of ejection or physical injury for the user or for third parties.(i)The form and composition of projectiles and the kinetic energy they may develop when fired from a toy designed for that purpose must be such that, taking into account the nature of the toy, there is no unreasonable risk of physical injury to the user or to third parties.(j)Toys containing heating elements must be so constructed as to ensure that:the maximum temperature of any accessible surfaces does not cause burns when touched,liquids and gases contained within toys do not reach temperatures or pressures which are such that their escape from a toy, other than for reasons essential to the proper functioning of the toy, might cause burns, scalds or other physical injury.2.Flammability(a)Toys must not constitute a dangerous flammable element in the child's environment. They must therefore be composed of materials which:1.do not burn if directly exposed to a flame or spark or other potential seat of fire; or2.are not readily flammable (the flame goes out as soon as the fire cause disappears); or3.if they do ignite, burn slowly and present a low rate of spread of the flame; or4.irrespective of the toy's chemical composition, are treated so as to delay the combustion process.Such combustible materials must not constitute a risk of ignition for other materials used in the toy.(b)Toys must not contain, as such, substances or mixtures which may become flammable due to the loss of non-flammable volatile components if, for reasons essential to their functioning, in particular materials and equipment for chemistry experiments, model assembly, plastic or ceramic moulding, enamelling, photography or similar activities, such toys contain mixtures which are dangerous as defined in Directive 67/548/EEC or substances fulfilling the criteria for any of the following hazard classes or categories set out in Annex I to Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16 December 2008 on classification, labelling and packaging of substances and mixturesOJ L 353, 31.12.2008, p. 1.:(i)hazard classes 2.1 to 2.4, 2.6 and 2.7, 2.8 types A and B, 2.9, 2.10, 2.12, 2.13 categories 1 and 2, 2.14 categories 1 and 2, 2.15 types A to F;(ii)hazard classes 3.1 to 3.6, 3.7 adverse effects on sexual function and fertility or on development, 3.8 effects other than narcotic effects, 3.9 and 3.10;(iii)hazard class 4.1;(iv)hazard class 5.1.(c)Toys must not be explosive or contain elements or substances likely to explode when used as specified in Article 2 (1) of the Directive. This provision does not apply to toy percussion caps, for which reference should be made to point 10 of Annex I and the related footnote.(d)Toys and, in particular, chemical games and toys, must not contain as such substances or mixtures:which, when mixed, may explode:through chemical reaction, or through heating,when mixed with oxidizing substances,which contain volatile components which are flammable in air and liable to form flammable or explosive vapour/air mixture.3.Chemical properties1.Toys must be so designed and constructed that, when used as specified in Article 2 (1) of the Directive, they do not present health hazards or risks of physical injury by ingestion, inhalation or contact with the skin, mucous tissues or eyes.They must in all cases comply with the relevant Community legislation relating to certain categories of products or to the prohibition, restriction of use or labelling of certain dangerous substances and mixtures.2.In particular, for the protection of children's health, bioavailability resulting from the use of toys must not, as an objective, exceed the following levels per day:0,2 μg for antimony,0,1 μg for arsenic,25,0 μg for barium,0,6 μg for cadmium,0,3 μg for chromium,0,7 μg for lead,0,5 μg for mercury,5,0 μg for selenium,or such other values as may be laid down for these or other substances in Community legislation based on scientific evidence.The bioavailability of these substances means the soluble extract having toxicological significance.3.Toys must not contain mixtures which are dangerous within the meaning of Directive 1999/45/EC of the European Parliament and of the Council of 31 May 1999 concerning the approximation of the laws, regulations and administrative provisions of the Member States relating to the classification, packaging and labelling of dangerous preparationsOJ L 200, 30.7.1999, p. 1. or substances fulfilling the criteria for any of the following hazard classes or categories set out in Annex I to Regulation (EC) No 1272/2008:(a)hazard classes 2.1 to 2.4, 2.6 and 2.7, 2.8 types A and B, 2.9, 2.10, 2.12, 2.13 categories 1 and 2, 2.14 categories 1 and 2, 2.15 types A to F;(b)hazard classes 3.1 to 3.6, 3.7 adverse effects on sexual function and fertility or on development, 3.8 effects other than narcotic effects, 3.9 and 3.10;(c)hazard class 4.1;(d)hazard class 5.1,in amounts which may harm the health of children using them. In any event it is strictly forbidden to include, in a toy, such substances or mixtures if they are intended to be used as such while the toy is being used.However, where a limited number of substances or mixtures are essential to the functioning of certain toys, in particular materials and equipment for chemistry experiments, model assembly, plastic or ceramic moulding, enamelling, photography or similar activities, they are permitted up to a maximum concentration level to be defined for each substance or mixture by mandate to the European Committee for Standardization (CEN) according to the procedure of the committee set up by Directive 83/189/EEC, provided the permitted substances and mixtures comply with the Community classification rules in respect of labelling, without prejudice to point 4 of Annex IV.4.Electrical properties(a)Electric toys must not be powered by electricity of a nominal voltage exceeding 24 volts and no part of the toy may exceed 24 volts.(b)Parts of toys which are connected to, or liable to come into contact with a source of electricity capable of causing electric shock, together with the cables or other conductors through which electricity is conveyed to such parts, must be properly insulated and mechanically protected so as to prevent the risk of such shock.(c)Electric toys must be so designed and constructed as to ensure that the maximum temperatures reached by all directly accessible surfaces are not such as to cause burns when touched.5.HygieneToys must be so designed and manufactured as to meet the requirements of hygiene and cleanliness in order to avoid any risk of infection, sickness and contamination.6.RadioactivityToys must not contain radioactive elements or substances in forms or proportions likely to be detrimental to a child's health. Council Directive 80/836/Euratom shall applyOJ No L 246, 17.9.1980, p. 1..ANNEX IIICONDITIONS TO BE FULFILLED BY THE APPROVED BODIES(Article 9 (1))The bodies designated by the Member States must fulfil the following minimum conditions:1.availability of personnel and of the necessary means and equipment;2.technical competence and professional integrity of personnel;3.independence, in carrying out the tests, preparing the reports, issuing the certificates and performing the surveillance provided for in this Directive, of staff and technical personnel in relation to all circles, groups or persons directly or indirectly concerned with toys;4.maintenance of professional secrecy by personnel;5.subscription of a civil liability insurance unless that liability is covered by the state under national law.Fulfilment of the conditions under 1 and 2 shall be verified at intervals by the competent authorities of the Member States.ANNEX IVWARNINGS AND INDICATIONS OF PRECAUTIONS TO BE TAKEN WHEN USING TOYS(Article 11 (5))Toys must be accompanied by appropriate clearly legible warnings in order to reduce inherent risks in their use as described in the essential requirements, and specifically:1.Toys not intended for children under 36 monthsToys which might be dangerous for children under 36 months of age shall bear a warning, for example: "Not suitable for children under 36 months" or "Not suitable for children under three years" together with a brief indication, which may also appear in the instructions for use, of the specific risks calling for this restriction.This provision does not apply to toys which, on account of their function, dimensions, characteristics, properties or other cogent grounds, are manifestly unsuitable for children under 36 months.2.Slides, suspended swings and rings, trapezes, ropes and similar toys attached to a crossbeamSuch toys shall be accompanied by instructions drawing attention to the need to carry out checks and maintenance of the main parts (suspensions, fixings, anchorages, etc.) at intervals, and pointing out that, if these checks are not carried out, the toy may cause a fall or overturn.Instructions must also be given as to correct assembly of the toy, indicating those parts which can present dangers if it is incorrectly assembled.3.Functional toysFunctional toys or their packaging shall bear the marking "Warning: to be used under the direct supervision of an adult".In addition, these toys shall be accompanied by directions giving working instructions as well as the precautions to be taken by the user, with the warning that failure to take these precautions would expose the user to the hazards — to be specified — normally associated with the appliance or product of which the toy is a scale model or an imitation. It will also be indicated that the toy must be kept out of the reach of very young children."Functional toys" means toys which are used in the same way as, and are often scale models of, appliances or installations intended for adults.4.Toys containing inherently dangerous substances or mixtures. Chemical toys(a)Without prejudice to the application of the provisions laid down in Regulation (EC) No 1272/2008, the instructions for use of toys containing mixtures which are inherently dangerous or substances fulfilling the criteria for any of the following hazard classes or categories set out in Annex I to Regulation (EC) No 1272/2008:(i)hazard classes 2.1 to 2.4, 2.6 and 2.7, 2.8 types A and B, 2.9, 2.10, 2.12, 2.13 categories 1 and 2, 2.14 categories 1 and 2, 2.15 types A to F;(ii)hazard classes 3.1 to 3.6, 3.7 adverse effects on sexual function and fertility or on development, 3.8 effects other than narcotic effects, 3.9 and 3.10;(iii)hazard class 4.1;(iv)hazard class 5.1;shall bear a warning of the hazardous nature of these substances or mixtures and an indication of the precautions to be taken by the user in order to avoid hazards associated with them, which shall be specified concisely according to the type of toy. The first aid to be given in the event of serious accidents resulting from the use of this type of toy shall also be mentioned. It shall also be stated that the toys must be kept out of reach of very young children.(b)In addition to the instructions provided for in (a), chemical toys shall bear the following marking on their packaging:"Warning: for children overAge to be decided by the manufacturer. years of age only. For use under adult supervision".In particular, the following are regarded as chemical toys: chemistry sets, plastic embedding sets, miniature workshops for ceramics, enamelling or photography and similar toys.5.Skates and skateboards for childrenIf these products are offered for sale as toys they shall bear the marking:"Warning: protective equipment should be worn".Moreover, the instructions for use shall contain a reminder that the toy must be used with caution, since it requires great skill, so as to avoid falls or collisions causing injury to the user and third parties. Some indication shall also be given as to recommended protective equipment (helmets, gloves, knee-pads, elbow-pads, etc.).6.Toys intended for use in waterThe toys intended for use in water defined in Section II. 1 (f) of Annex II shall contain the warning in accordance with CEN's brief to adapt standard EN/71, parts 1 and 2:"Warning! Only to be used in water in which the child is within its depth and under supervision".ANNEX VCE CONFORMITY MARKINGThe CE conformity marking shall consist of the initials "CE" taking the following form:If the CE marking is reduced or enlarged the proportions given in the above graduated drawing must be respected.The various components of the CE marking must have substantially the same vertical dimension, which may not be less that 5 mm.

Council Directive 88/378/EEC of 3 May 1988 on the approximation of the laws of the Member States concerning the safety of toys

Corrected by