Council Directive 77/538/EEC of 28 June 1977 on the approximation of the laws of the Member States relating to rear fog lamps for motor vehicles and their trailers
Modified by
  • Actconcerning the conditions of accession of the Hellenic Republic and the adjustments to the Treaties, 11979H, November 19, 1979
  • Actconcerning the conditions of accession of the Kingdom of Spain and the Portuguese Republic and the adjustments to the Treaties, 11985I, November 15, 1985
  • Council Directiveof 25 June 1987amending certain directives on the approximation of the laws of the Member States relating to industrial products with respect to the distinctive numbers and letters indicating the Member States(87/354/EEC), 31987L0354, July 11, 1987
  • Commission Directiveof 1 August 1989adapting to technical progress Council Directive 77/538/EEC on the approximation of the laws of the Member States relating to rear fog lamps for motor vehicles and their trailers(89/518/EEC), 31989L0518, September 12, 1989
  • Actconcerning the conditions of accession of the Kingdom of Norway, the Republic of Austria, the Republic of Finland and the Kingdom of Sweden and the adjustments to the Treaties on which the European Union is founded(94/C 241/08)Decision of the Council of the European Unionof 1 January 1995adjusting the instruments concerning the accession of new Member States to the European Union(95/1/EC, Euratom, ECSC), 11994N31995D0001, August 29, 1994
  • Decision of the Council of the European Unionof 1 January 1995adjusting the instruments concerning the accession of new Member States to the European Union(95/1/EC, Euratom, ECSC), 31995D0001, January 1, 1995
  • Commission Directive 1999/14/ECof 16 March 1999adapting to technical progress Council Directive 77/538/EEC relating to rear fog lamps for motor vehicles and their trailers(Text with EEA relevance), 31999L0014, April 12, 1999
  • Actconcerning the conditions of accession of the Czech Republic, the Republic of Estonia, the Republic of Cyprus, the Republic of Latvia, the Republic of Lithuania, the Republic of Hungary, the Republic of Malta, the Republic of Poland, the Republic of Slovenia and the Slovak Republic and the adjustments to the Treaties on which the European Union is founded, 12003T, September 23, 2003
  • Council Directive 2006/96/ECof 20 November 2006adapting certain Directives in the field of free movement of goods, by reason of the accession of Bulgaria and Romania, 32006L0096, December 20, 2006
  • Regulation (EC) No 661/2009 of the European Parliament and of the Councilof 13 July 2009concerning type-approval requirements for the general safety of motor vehicles, their trailers and systems, components and separate technical units intended therefor(Text with EEA relevance), 32009R0661, July 31, 2009
  • Council Directive 2013/15/EUof 13 May 2013adapting certain directives in the field of free movement of goods, by reason of the accession of the Republic of Croatia, 32013L0015, June 10, 2013
Corrected by
  • Corrigendum to Council Directive 77/538/EEC of 28 June 1977 on the approximation of the laws of the Member States relating to rear fog lamps for motor vehicles and their trailers, 31977L0538R(01), October 10, 1978
Council Directiveof 28 June 1977on the approximation of the laws of the Member States relating to rear fog lamps for motor vehicles and their trailers(77/538/EEC) THE COUNCIL OF THE EUROPEAN COMMUNITIES,Having regard to the Treaty establishing the European Economic Community, and in particular Article 100 thereof,Having regard to the proposal from the Commission,Having regard to the opinion of the European ParliamentOJ No C 118, 16. 5. 1977, p. 29.,Having regard to the opinion of the Economic and Social CommitteeOJ No C 114, 11. 5. 1977, p. 2.,Whereas the technical requirements which motor vehicles must satisfy pursuant to national laws relate inter alia to their rear fog lamps;Whereas these requirements differ from one Member State to another; whereas it is therefore necessary that all Member States adopt the same requirements either in addition to or in place of their existing rules, in order, in particular, to allow the EEC type-approval procedure which was the subject of Council Directive 70/156/EEC of 6 February 1970 on the approximation of the laws of the Member States relating to the type-approval of motor vehicles and their trailersOJ No L 42, 23. 2. 1970, p. 1., to be introduced in respect of each type of vehicle;Whereas in Directive 76/756/EECOJ No L 262, 27. 9. 1976, p. 1., the Council laid down the common requirements for the installation of lighting and light-signalling devices on motor vehicles and their trailers;Whereas a harmonized component type-approval procedure for rear fog lamps makes it possible for each Member State to check compliance with the common construction and testing requirements and to inform the other Member States of its findings by sending a copy of the component type-approval certificate completed for each type of rear fog lamp; whereas the placing of an EEC component type-approval mark on all rear fog lamps manufactured in conformity with the approved type obviates any need for technical checks on these rear fog lamps in the other Member States;Whereas it is desirable to draft the technical requirements so that they have the same aim as the work being carried out on the subject in the UN Economic Commission for Europe;Whereas the approximation of national laws relating to motor vehicles entails reciprocal recognition by Member-States of the tests carried out by each of them on the basis of the common requirements,HAS ADOPTED THIS DIRECTIVE:
Article 11.Each Member State shall grant EC component type-approval for any type of rear fog lamp which satisfies the construction and testing requirements laid down in the relevant Annexes.2.The Member State which has granted EEC component type-approval shall take the measures required in order to verify that production models conform to the approved type, in so far as this is necessary and if need be in cooperation with the competent authorities in the other Member States. Such verification shall be limited to spot checks.
Article 2Member States shall, for each type of rear fog lamp which they approve pursuant to Article 1, issue to the manufacturer an EC component type-approval mark conforming to the model shown in Annex I, Appendix 3.Member States shall take all appropriate measures to prevent the use of marks liable to create confusion between rear fog lamps which have been type-approved pursuant to Article 1, and other devices.
Article 31.No Member State may prohibit the placing on the market of rear fog lamps on grounds relating to their construction or method of functioning if they bear the EEC component type-approval mark.2.Nevertheless, a Member State may prohibit the placing on the market of rear fog lamps bearing the EEC component type-approval mark which consistently fail to conform to the approved type.That State shall inform the other Member States and the Commission forthwith of the measures taken, specifying the reasons for its decision.
Article 4The competent authorities of the Member States shall inform each other, by means of the procedures specified in Article 4(6) of Directive 70/156/EEC, of each approval which they have granted, refused or withdrawn pursuant to this Directive.
Article 51.If the Member State which has granted EEC component type-approval finds that a number of rear fog lamps bearing the same EEC component type-approval mark do not conform to the type which it has approved, it shall take the necessary measures to ensure that production models conform to the approved type. The competent authorities of that State shall advise those of the other Member States of the measures taken which may, where there is consistent failure to conform, extend to withdrawal of EEC component type-approval. The said authorities shall take the same measures if they are informed by the competent authorities of another Member State of such failure to conform.2.The competent authorities of Member States shall inform each other within one month of any withdrawal of EEC component type-approval, and of the reasons for such a measure.
Article 6Any decision taken pursuant to the provisions adopted in implementation of this Directive, to refuse or withdraw EEC component type-approval for a rear fog lamp or prohibit its placing on the market or use shall set out in detail the reasons on which it is based. Such decision shall be notified to the party concerned, who shall at the same time be informed of the remedies available to him under the laws in force in the Member States and of the time limits allowed for the exercise of such remedies.
Article 7No Member State may refuse to grant EEC type-approval or national type-approval of any vehicle on grounds relating to its rear fog lamps if these bear the EEC component type-approval mark and are fitted in accordance with the requirements laid down in Directive 76/756/EEC.
Article 8No Member State may refuse or prohibit the sale, registration, entry into service or use of any vehicle on grounds relating to its rear fog lamps if these bear the EEC component type-approval mark and are fitted in accordance with the requirements laid down in Directive 76/756/EEC.
Article 9For the purposes of this Directive, "vehicle" means any motor vehicle intended for use on the road, with or without bodywork, having at least four wheels and a maximum design speed exceeding 25 km/h, and its trailers, with the exception of vehicles which run on rails and of agricultural and forestry tractors and all mobile machinery.
Article 10Any amendments necessary to adjust the requirements of the Annexes to take account of technical progress shall be adopted in accordance with the procedure laid down in Article 13 of Directive 70/156/EEC.
Article 111.Member States shall bring into force the provisions needed in order to comply with this Directive within 18 months of its notification and shall forthwith inform the Commission thereof.2.Member States shall ensure that the texts of the main provisions of national law which they adopt in the field covered by this Directive are communicated to the Commission.
Article 12This Directive is addressed to the Member States.
nullLIST OF ANNEXES
ANNEX I:Administrative provisions for type approval
Appendix 1:Information document
Appendix 2:Type-approval certificate
Appendix 3:Models of the EC component type-approval mark
ANNEX II:Technical requirements
ANNEX IADMINISTRATIVE PROVISIONS FOR TYPE APPROVAL1.APPLICATION FOR EC COMPONENT TYPE-APPROVAL1.1.The application for EC component type-approval pursuant to Article 3(4) of Directive 70/156/EEC of a type of rear fog lamp shall be submitted by the manufacturer.1.2.A model for the information document is given in Appendix 1.1.3.The following must be submitted to the technical service responsible for conducting the type-approval tests:1.3.1.Two samples, equipped with the lamp or lamps recommended; if the devices are not identical but are symmetrical and suitable for mounting one on the left and one on the right side of the vehicle, the two samples submitted may be identical and be suitable for mounting only on the right or only on the left side of the vehicle.2.MARKINGS2.1.The devices submitted for EC component type approval must bear:2.1.1.the trade name or mark of the manufacturer;2.1.2.in the case of lamps with replaceable light sources: the type(s) of filament lamp prescribed;2.1.3.in the case of lamps with non-replaceable light sources: the nominal voltage and wattage.2.2.These markings shall be clearly legible and indelible and shall be affixed to the illuminating surface, or to one of the illuminating surfaces, of the device. They shall be visible from the exterior when the device is fitted to the vehicle.2.3.Each device shall have sufficient space for the component type-approval mark. This space shall be indicated on the drawings referred to in Appendix 1.3.GRANTING OF EC COMPONENT TYPE-APPROVAL3.1.If the relevant requirements are satisfied, EC type-approval pursuant to Article 4(3) and, if applicable, Article 4(4) of Directive 70/156/EEC shall be granted.3.2.A model for the EC type-approval certificate is given in Appendix 2.3.3.An approval number in accordance with Annex VII to Directive 70/156/EEC shall be assigned to each type of rear fog lamp approved. The same Member State shall not assign the same number to another type of rear fog lamp.3.4.Where EC component type approval is requested for a type of lighting and light-signalling device comprising a rear fog lamp and other lamps, a single EC component type-approval number may be assigned provided that the rear fog lamp complies with the requirements of this Directive and that each of the other lamps forming part of the lighting and light-signalling device for which EC component type approval is requested complies with the separate Directive applying to it.4.EC COMPONENT TYPE-APPROVAL MARK4.1.In addition to the markings referred to in item 2.1., every rear fog lamp conforming to the type approved pursuant to this Directive shall bear an EC component type-approval mark.4.2.This mark shall consist of:4.2.1.a rectangle surrounding the letter "e" followed by the distinguishing number or letters of the Member State which has granted type approval:1for Germany2for France3for Italy4for the Netherlands5for Sweden6for Belgium7for Hungary8for the Czech Republic9for Spain11for the United Kingdom12for Austria13for Luxembourg17for Finland18for Denmark19for Romania20for Poland21for Portugal23for Greece25for Croatia26for Slovenia27for Slovakia29for Estonia32for Latvia34for Bulgaria36for LithuaniaCYfor CyprusIRLfor Ireland;MTfor Malta;4.2.2.in the vicinity of the rectangle the "base approval number" contained in section 4 of the type-approval number referred to in Annex VII to Directive 70/156/EEC, preceded by the two figures indicating the sequence number assigned to the most recent major technical amendment to Directive 77/538/EEC on the date EEC type-approval was granted. In this Directive the sequence number is 00;4.2.3.an additional symbol consisting of the letter "F".4.3.The EC component type-approval mark shall be affixed to the lens of the lamp or one of the lenses in such a way as to be indelible and clearly legible even when the lamps are fitted to the vehicle.4.4.Examples of the EC component type-approval mark are given in Appendix 3, Figure 1.4.5.Where a single EC component type-approval number is issued, as per item 3.4. above, for a type of lighting and light-signalling device comprising a rear fog lamp and other lamps, a single EC component type-approval mark may be affixed, consisting of:4.5.1.a rectangle surrounding the letter "e" followed by the distinguishing number or letters of the Member State which has granted type approval (see item 4.2.1.);4.5.2.the base approval number (see item 4.2.2., first half-sentence);4.5.3.if necessary, the required arrow, in so far as it relates to the lamp assembly as a whole.4.6.This mark may be located anywhere on the lamps which are grouped, combined or reciprocally incorporated, provided that:4.6.1.it is visible after the installation of the lamps;4.6.2.no light-transmitting components of the grouped, combined or reciprocally incorporated lamps can be removed without simultaneously removing the approval mark.4.7.The identification symbol for each lamp corresponding to each Directive pursuant to which EC component type approval was granted, together with the sequence number (see item 4.2.2.) and, where necessary, the letter "D" and the required arrow shall be marked:4.7.1.either on the appropriate light-emitting surface;4.7.2.or in a group, in such a way that each of the grouped, combined or reciprocally incorporated lamps may be clearly identified.4.8.The dimensions of the components of this mark must not be less than the minimum dimensions specified for individual marks by the various Directives pursuant to which EC component type approval was granted.4.9.Examples of an EC component type-approval mark for a lamp that is grouped, combined or reciprocally incorporated with other lamps are given in figure 2 of Appendix 3.5.MODIFICATIONS OF THE TYPE AND AMENDMENTS TO APPROVALS5.1.In the case of modifications of the type approved pursuant to this Directive, the provisions of Article 5 of Directive 70/156/EEC shall apply.6.CONFORMITY OF PRODUCTION6.1.As a general rule, measures to ensure the conformity of production shall be taken in accordance with the provisions laid down in Article 10 of Directive 70/156/EEC.6.2.Every rear fog lamp shall comply with the photometric conditions specified in paragraphs 6 and 9Of the documents referred to in point 1 of Annex II to this Directive.. Nevertheless, in the case of a rear fog lamp selected at random from series production, the requirements as to minimum intensity of the light emitted (measured with a standard lamp as referred to in paragraph 7Of the documents referred to in point 1 of Annex II to this Directive.) shall be limited in each relevant direction to 80 per cent of the minimum value prescribed in paragraph 6Of the documents referred to in point 1 of Annex II to this Directive..ANNEX IITECHNICAL REQUIREMENTS1.The technical requirements are those set out in paragraphs 1, 5 to 9 and Annex 3 of UN-ECE Regulation No 38 which consists of a consolidation of the following documents:the Regulation in its original form (00)
E/ECE/324Rev. 1/Add. 37.
E/ECE/TRANS/505
;supplement 1 to Regulation No 38
E/ECE/324Rev. 1/Add. 37/Amend. 1.
E/ECE/TRANS/505
;supplements 2 and 3 to Regulation No 38 including modifications
E/ECE/324Rev. 1/Add. 37/Amend. 2.
E/ECE/TRANS/505
;supplement 4 to Regulation No 38
E/ECE/324Rev. 1/Add. 37/Amend. 3.
E/ECE/TRANS/505
;supplement 5 to Regulation No 38TRANS/WP.29/524,except that:1.1.Where reference is made to "Regulation No 48", this shall be understood as "Directive 76/756/EEC".1.2.Where reference is made to "Regulation No 37", this shall be understood as "Annex VII to Directive 76/761/EEC".